linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kieran Bingham <kieran.bingham@ideasonboard.com>
To: linux-renesas-soc@vger.kernel.org,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Geert Uytterhoeven <geert@glider.be>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Magnus Damm <magnus.damm@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v3 3/3] arm64: dts: renesas: r8a779a0: falcon-cpu: Add DSI display output
Date: Thu, 23 Sep 2021 02:04:02 +0100	[thread overview]
Message-ID: <20210923010402.3418555-4-kieran.bingham@ideasonboard.com> (raw)
In-Reply-To: <20210923010402.3418555-1-kieran.bingham@ideasonboard.com>

From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

Provide the display output using the sn65dsi86 MIPI DSI bridge

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
---
v3:
 - Fix the voltage regulator values
 - No longer override the clocks
 - use clk-x6 as clock node name

 .../boot/dts/renesas/r8a779a0-falcon-cpu.dtsi | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
index a0a1a1da0d87..9943f09a5cc6 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
@@ -66,6 +66,15 @@ memory@700000000 {
 		reg = <0x7 0x00000000 0x0 0x80000000>;
 	};
 
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	reg_1p8v: regulator-1p8v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-1.8V";
@@ -83,6 +92,41 @@ reg_3p3v: regulator-3p3v {
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	mini-dp-con {
+		compatible = "dp-connector";
+		label = "CN5";
+		type = "mini";
+
+		port {
+			mini_dp_con_in: endpoint {
+				remote-endpoint = <&sn65dsi86_out>;
+			};
+		};
+	};
+
+	sn65dsi86_refclk: clk-x6 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <38400000>;
+	};
+};
+
+&dsi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&sn65dsi86_in>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&du {
+	status = "okay";
 };
 
 &extal_clk {
@@ -114,6 +158,41 @@ &i2c1 {
 
 	status = "okay";
 	clock-frequency = <400000>;
+
+	sn65dsi86@2c {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+
+		clocks = <&sn65dsi86_refclk>;
+		clock-names = "refclk";
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+
+		vccio-supply = <&reg_1p8v>;
+		vpll-supply = <&reg_1p8v>;
+		vcca-supply = <&reg_1p2v>;
+		vcc-supply = <&reg_1p2v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sn65dsi86_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				sn65dsi86_out: endpoint {
+					remote-endpoint = <&mini_dp_con_in>;
+				};
+			};
+		};
+	};
 };
 
 &i2c6 {
-- 
2.30.2


      parent reply	other threads:[~2021-09-23  1:04 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20210923010402.3418555-1-kieran.bingham@ideasonboard.com>
2021-09-23  1:04 ` [PATCH v3 1/3] arm64: dts: renesas: r8a779a0: Add DU support Kieran Bingham
2021-09-23  7:00   ` Geert Uytterhoeven
2021-09-23 12:05     ` Kieran Bingham
2021-09-24 14:22       ` Kieran Bingham
2021-09-24 14:23   ` [PATCH v3.1 " Kieran Bingham
2021-09-23  1:04 ` [PATCH v3 2/3] arm64: dts: renesas: r8a779a0: Add DSI encoders Kieran Bingham
2021-09-23  1:10   ` Laurent Pinchart
2021-09-23  1:04 ` Kieran Bingham [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210923010402.3418555-4-kieran.bingham@ideasonboard.com \
    --to=kieran.bingham@ideasonboard.com \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=geert@glider.be \
    --cc=kieran.bingham+renesas@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).