From: Daniel Palmer <daniel@0x0f.com>
To: devicetree@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-leds@vger.kernel.org
Cc: linus.walleij@linaro.org, bgolaszewski@baylibre.com,
robh+dt@kernel.org, pavel@ucw.cz,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Daniel Palmer <daniel@0x0f.com>,
Rob Herring <robh@kernel.org>
Subject: [PATCH v2 02/11] dt-bindings: gpio: msc313: Add offsets for ssd20xd
Date: Thu, 23 Sep 2021 15:54:51 +0900 [thread overview]
Message-ID: <20210923065500.2284347-3-daniel@0x0f.com> (raw)
In-Reply-To: <20210923065500.2284347-1-daniel@0x0f.com>
Add the gpio offsets for the SSD201 and SSD202D chips.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
include/dt-bindings/gpio/msc313-gpio.h | 71 ++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
diff --git a/include/dt-bindings/gpio/msc313-gpio.h b/include/dt-bindings/gpio/msc313-gpio.h
index 2dd56683d3c1..5458c6580a02 100644
--- a/include/dt-bindings/gpio/msc313-gpio.h
+++ b/include/dt-bindings/gpio/msc313-gpio.h
@@ -50,4 +50,75 @@
#define MSC313_GPIO_SPI0_DI (MSC313_GPIO_SPI0 + 2)
#define MSC313_GPIO_SPI0_DO (MSC313_GPIO_SPI0 + 3)
+/* SSD20x */
+#define SSD20XD_GPIO_FUART 0
+#define SSD20XD_GPIO_FUART_RX (SSD20XD_GPIO_FUART + 0)
+#define SSD20XD_GPIO_FUART_TX (SSD20XD_GPIO_FUART + 1)
+#define SSD20XD_GPIO_FUART_CTS (SSD20XD_GPIO_FUART + 2)
+#define SSD20XD_GPIO_FUART_RTS (SSD20XD_GPIO_FUART + 3)
+
+#define SSD20XD_GPIO_SD (SSD20XD_GPIO_FUART_RTS + 1)
+#define SSD20XD_GPIO_SD_CLK (SSD20XD_GPIO_SD + 0)
+#define SSD20XD_GPIO_SD_CMD (SSD20XD_GPIO_SD + 1)
+#define SSD20XD_GPIO_SD_D0 (SSD20XD_GPIO_SD + 2)
+#define SSD20XD_GPIO_SD_D1 (SSD20XD_GPIO_SD + 3)
+#define SSD20XD_GPIO_SD_D2 (SSD20XD_GPIO_SD + 4)
+#define SSD20XD_GPIO_SD_D3 (SSD20XD_GPIO_SD + 5)
+
+#define SSD20XD_GPIO_UART0 (SSD20XD_GPIO_SD_D3 + 1)
+#define SSD20XD_GPIO_UART0_RX (SSD20XD_GPIO_UART0 + 0)
+#define SSD20XD_GPIO_UART0_TX (SSD20XD_GPIO_UART0 + 1)
+
+#define SSD20XD_GPIO_UART1 (SSD20XD_GPIO_UART0_TX + 1)
+#define SSD20XD_GPIO_UART1_RX (SSD20XD_GPIO_UART1 + 0)
+#define SSD20XD_GPIO_UART1_TX (SSD20XD_GPIO_UART1 + 1)
+
+#define SSD20XD_GPIO_TTL (SSD20XD_GPIO_UART1_TX + 1)
+#define SSD20XD_GPIO_TTL0 (SSD20XD_GPIO_TTL + 0)
+#define SSD20XD_GPIO_TTL1 (SSD20XD_GPIO_TTL + 1)
+#define SSD20XD_GPIO_TTL2 (SSD20XD_GPIO_TTL + 2)
+#define SSD20XD_GPIO_TTL3 (SSD20XD_GPIO_TTL + 3)
+#define SSD20XD_GPIO_TTL4 (SSD20XD_GPIO_TTL + 4)
+#define SSD20XD_GPIO_TTL5 (SSD20XD_GPIO_TTL + 5)
+#define SSD20XD_GPIO_TTL6 (SSD20XD_GPIO_TTL + 6)
+#define SSD20XD_GPIO_TTL7 (SSD20XD_GPIO_TTL + 7)
+#define SSD20XD_GPIO_TTL8 (SSD20XD_GPIO_TTL + 8)
+#define SSD20XD_GPIO_TTL9 (SSD20XD_GPIO_TTL + 9)
+#define SSD20XD_GPIO_TTL10 (SSD20XD_GPIO_TTL + 10)
+#define SSD20XD_GPIO_TTL11 (SSD20XD_GPIO_TTL + 11)
+#define SSD20XD_GPIO_TTL12 (SSD20XD_GPIO_TTL + 12)
+#define SSD20XD_GPIO_TTL13 (SSD20XD_GPIO_TTL + 13)
+#define SSD20XD_GPIO_TTL14 (SSD20XD_GPIO_TTL + 14)
+#define SSD20XD_GPIO_TTL15 (SSD20XD_GPIO_TTL + 15)
+#define SSD20XD_GPIO_TTL16 (SSD20XD_GPIO_TTL + 16)
+#define SSD20XD_GPIO_TTL17 (SSD20XD_GPIO_TTL + 17)
+#define SSD20XD_GPIO_TTL18 (SSD20XD_GPIO_TTL + 18)
+#define SSD20XD_GPIO_TTL19 (SSD20XD_GPIO_TTL + 19)
+#define SSD20XD_GPIO_TTL20 (SSD20XD_GPIO_TTL + 20)
+#define SSD20XD_GPIO_TTL21 (SSD20XD_GPIO_TTL + 21)
+#define SSD20XD_GPIO_TTL22 (SSD20XD_GPIO_TTL + 22)
+#define SSD20XD_GPIO_TTL23 (SSD20XD_GPIO_TTL + 23)
+#define SSD20XD_GPIO_TTL24 (SSD20XD_GPIO_TTL + 24)
+#define SSD20XD_GPIO_TTL25 (SSD20XD_GPIO_TTL + 25)
+#define SSD20XD_GPIO_TTL26 (SSD20XD_GPIO_TTL + 26)
+#define SSD20XD_GPIO_TTL27 (SSD20XD_GPIO_TTL + 27)
+
+#define SSD20XD_GPIO_GPIO (SSD20XD_GPIO_TTL27 + 1)
+#define SSD20XD_GPIO_GPIO0 (SSD20XD_GPIO_GPIO + 0)
+#define SSD20XD_GPIO_GPIO1 (SSD20XD_GPIO_GPIO + 1)
+#define SSD20XD_GPIO_GPIO2 (SSD20XD_GPIO_GPIO + 2)
+#define SSD20XD_GPIO_GPIO3 (SSD20XD_GPIO_GPIO + 3)
+#define SSD20XD_GPIO_GPIO4 (SSD20XD_GPIO_GPIO + 4)
+#define SSD20XD_GPIO_GPIO5 (SSD20XD_GPIO_GPIO + 5)
+#define SSD20XD_GPIO_GPIO6 (SSD20XD_GPIO_GPIO + 6)
+#define SSD20XD_GPIO_GPIO7 (SSD20XD_GPIO_GPIO + 7)
+#define SSD20XD_GPIO_GPIO10 (SSD20XD_GPIO_GPIO + 8)
+#define SSD20XD_GPIO_GPIO11 (SSD20XD_GPIO_GPIO + 9)
+#define SSD20XD_GPIO_GPIO12 (SSD20XD_GPIO_GPIO + 10)
+#define SSD20XD_GPIO_GPIO13 (SSD20XD_GPIO_GPIO + 11)
+#define SSD20XD_GPIO_GPIO14 (SSD20XD_GPIO_GPIO + 12)
+#define SSD20XD_GPIO_GPIO85 (SSD20XD_GPIO_GPIO + 13)
+#define SSD20XD_GPIO_GPIO86 (SSD20XD_GPIO_GPIO + 14)
+#define SSD20XD_GPIO_GPIO90 (SSD20XD_GPIO_GPIO + 15)
+
#endif /* _DT_BINDINGS_MSC313_GPIO_H */
--
2.33.0
next prev parent reply other threads:[~2021-09-23 6:55 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-23 6:54 [PATCH v2 00/11] gpio: msc313: Add gpio support for ssd20xd Daniel Palmer
2021-09-23 6:54 ` [PATCH v2 01/11] dt-bindings: gpio: msc313: Add compatible " Daniel Palmer
2021-09-23 6:54 ` Daniel Palmer [this message]
2021-09-23 6:54 ` [PATCH v2 03/11] dt-bindings: leds: Document "activity" trigger Daniel Palmer
2021-09-27 19:52 ` Rob Herring
2021-09-27 22:51 ` Daniel Palmer
2021-09-23 6:54 ` [PATCH v2 04/11] gpio: msc313: Code clean ups Daniel Palmer
2021-09-23 6:54 ` [PATCH v2 05/11] gpio: msc313: Add support for SSD201 and SSD202D Daniel Palmer
2021-09-23 6:54 ` [PATCH v2 06/11] ARM: dts: mstar: Set gpio compatible for ssd20xd Daniel Palmer
2021-09-23 6:54 ` [PATCH v2 07/11] ARM: dts: mstar: unitv2: Wire up LEDs Daniel Palmer
2021-11-30 18:55 ` Pavel Machek
2021-12-02 9:44 ` Daniel Palmer
2022-10-02 10:26 ` Pavel Machek
2021-09-23 6:54 ` [PATCH v2 08/11] ARM: dts: mstar: unitv2: Add core regulator Daniel Palmer
2021-09-23 6:54 ` [PATCH v2 09/11] ARM: dts: mstar: unitv2: Add io regulator Daniel Palmer
2021-09-23 6:54 ` [PATCH v2 10/11] ARM: dts: mstar: unitv2: Add DRAM regulator Daniel Palmer
2021-09-23 6:55 ` [PATCH v2 11/11] ARM: dts: mstar: unitv2: Add wifi switch Daniel Palmer
2021-11-19 13:11 ` [PATCH v2 00/11] gpio: msc313: Add gpio support for ssd20xd Daniel Palmer
2021-11-22 0:04 ` Linus Walleij
2021-11-22 10:01 ` Daniel Palmer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210923065500.2284347-3-daniel@0x0f.com \
--to=daniel@0x0f.com \
--cc=bgolaszewski@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).