[PATCH 0/7] media: ipu3 i2c: Fix v4l2-compliance issues

[PATCH 0/7] media: ipu3 i2c: Fix v4l2-compliance issues

[Ricardo Ribalda]

Fix some issues found with v4l2-compliance. Tested in Soraka which also
has some subdevices that had some issues with v4l2-compliance.

Ricardo Ribalda (7):
  media: ipu3-cio2: Check num_planes and sizes in queue_setup
  media: ipu3-cio2: Set valid initial format
  media: ipu3-cio2: imgu_fmt: Handle properly try
  media: ipu3-cio2: VIDIOC_QUERYCAP: Fix bus_info
  media: dw9714: Add implementation for events
  media: ov13858: Add implementation for events
  media: ov5670: Add implementation for events

 drivers/media/i2c/dw9714.c                    | 14 ++++++++++++--
 drivers/media/i2c/ov13858.c                   | 11 ++++++++++-
 drivers/media/i2c/ov5670.c                    | 11 ++++++++++-
 drivers/media/pci/intel/ipu3/ipu3-cio2-main.c |  8 ++++++--
 drivers/staging/media/ipu3/ipu3-v4l2.c        |  9 +++++----
 5 files changed, 43 insertions(+), 10 deletions(-)

-- 
2.33.0.685.g46640cef36-goog

[PATCH 1/7] media: ipu3-cio2: Check num_planes and sizes in queue_setup

[Ricardo Ribalda]

If num_planes is different than zero num_planes and sizes must be
checked to support the format.

Fix the following v4l2-compliance error:

Buffer ioctls (Input 0):
    fail: v4l2-test-buffers.cpp(717): q.create_bufs(node, 1, &fmt) != EINVAL
  test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
---
 drivers/media/pci/intel/ipu3/ipu3-cio2-main.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c b/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c
index 47db0ee0fcbfa..36099e95d29f2 100644
--- a/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c
+++ b/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c
@@ -798,13 +798,17 @@ static int cio2_vb2_queue_setup(struct vb2_queue *vq,
 	struct cio2_queue *q = vb2q_to_cio2_queue(vq);
 	unsigned int i;
 
-	*num_planes = q->format.num_planes;
+	if (*num_planes && *num_planes < q->format.num_planes)
+		return -EINVAL;
 
-	for (i = 0; i < *num_planes; ++i) {
+	for (i = 0; i < q->format.num_planes; ++i) {
+		if (*num_planes && sizes[i] < q->format.plane_fmt[i].sizeimage)
+			return -EINVAL;
 		sizes[i] = q->format.plane_fmt[i].sizeimage;
 		alloc_devs[i] = &cio2->pci_dev->dev;
 	}
 
+	*num_planes = q->format.num_planes;
 	*num_buffers = clamp_val(*num_buffers, 1, CIO2_MAX_BUFFERS);
 
 	/* Initialize buffer queue */
-- 
2.33.0.685.g46640cef36-goog

[PATCH 2/7] media: ipu3-cio2: Set valid initial format

[Ricardo Ribalda]

The initial format did not have a valid size.

Fixes v4l2-compliance:

fail: v4l2-test-formats.cpp(723): Video Output Multiplanar:
				  TRY_FMT(G_FMT) != G_FMT
test VIDIOC_TRY_FMT: FAIL

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
---
 drivers/staging/media/ipu3/ipu3-v4l2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/media/ipu3/ipu3-v4l2.c b/drivers/staging/media/ipu3/ipu3-v4l2.c
index 38a2407645096..fbb9eb2ba99e4 100644
--- a/drivers/staging/media/ipu3/ipu3-v4l2.c
+++ b/drivers/staging/media/ipu3/ipu3-v4l2.c
@@ -1136,7 +1136,7 @@ static int imgu_v4l2_node_setup(struct imgu_device *imgu, unsigned int pipe,
 	def_pix_fmt.height = def_bus_fmt.height;
 	def_pix_fmt.field = def_bus_fmt.field;
 	def_pix_fmt.num_planes = 1;
-	def_pix_fmt.plane_fmt[0].bytesperline = def_pix_fmt.width * 2;
+	def_pix_fmt.plane_fmt[0].bytesperline = 2496;
 	def_pix_fmt.plane_fmt[0].sizeimage =
 		def_pix_fmt.height * def_pix_fmt.plane_fmt[0].bytesperline;
 	def_pix_fmt.flags = 0;
-- 
2.33.0.685.g46640cef36-goog

[PATCH 3/7] media: ipu3-cio2: imgu_fmt: Handle properly try

[Ricardo Ribalda]

For a try_fmt call, the node noes not need to be enabled.

Fixes v4l2-compliance

fail: v4l2-test-formats.cpp(717): Video Output Multiplanar is valid, but
				  no TRY_FMT was implemented
test VIDIOC_TRY_FMT: FAIL

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
---
 drivers/staging/media/ipu3/ipu3-v4l2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/media/ipu3/ipu3-v4l2.c b/drivers/staging/media/ipu3/ipu3-v4l2.c
index fbb9eb2ba99e4..66995c6f15808 100644
--- a/drivers/staging/media/ipu3/ipu3-v4l2.c
+++ b/drivers/staging/media/ipu3/ipu3-v4l2.c
@@ -696,7 +696,7 @@ static int imgu_fmt(struct imgu_device *imgu, unsigned int pipe, int node,
 
 		/* CSS expects some format on OUT queue */
 		if (i != IPU3_CSS_QUEUE_OUT &&
-		    !imgu_pipe->nodes[inode].enabled) {
+		    !imgu_pipe->nodes[inode].enabled && !try) {
 			fmts[i] = NULL;
 			continue;
 		}
-- 
2.33.0.685.g46640cef36-goog

[PATCH 4/7] media: ipu3-cio2: VIDIOC_QUERYCAP: Fix bus_info

[Ricardo Ribalda]

bus_info field had a different value for the media entity and the video
device.

Fixes v4l2-compliance:

v4l2-compliance.cpp(637): media bus_info 'PCI:0000:00:05.0' differs from
			  V4L2 bus_info 'PCI:viewfinder'

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
---
 drivers/staging/media/ipu3/ipu3-v4l2.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/media/ipu3/ipu3-v4l2.c b/drivers/staging/media/ipu3/ipu3-v4l2.c
index 66995c6f15808..2594ac4eb0763 100644
--- a/drivers/staging/media/ipu3/ipu3-v4l2.c
+++ b/drivers/staging/media/ipu3/ipu3-v4l2.c
@@ -592,11 +592,12 @@ static const struct imgu_fmt *find_format(struct v4l2_format *f, u32 type)
 static int imgu_vidioc_querycap(struct file *file, void *fh,
 				struct v4l2_capability *cap)
 {
-	struct imgu_video_device *node = file_to_intel_imgu_node(file);
+	struct imgu_device *imgu = video_drvdata(file);
 
 	strscpy(cap->driver, IMGU_NAME, sizeof(cap->driver));
 	strscpy(cap->card, IMGU_NAME, sizeof(cap->card));
-	snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s", node->name);
+	snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s",
+		 pci_name(imgu->pci_dev));
 
 	return 0;
 }
-- 
2.33.0.685.g46640cef36-goog

[PATCH 5/7] media: dw9714: Add implementation for events

[Ricardo Ribalda]

Use v4l2 control API helpers to support the events.

Fixes v4l2-compliance:

test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
---
 drivers/media/i2c/dw9714.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/dw9714.c b/drivers/media/i2c/dw9714.c
index c8b4292512dca..3863dfeb82934 100644
--- a/drivers/media/i2c/dw9714.c
+++ b/drivers/media/i2c/dw9714.c
@@ -7,6 +7,7 @@
 #include <linux/pm_runtime.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
+#include <media/v4l2-event.h>
 
 #define DW9714_NAME		"dw9714"
 #define DW9714_MAX_FOCUS_POS	1023
@@ -100,7 +101,15 @@ static const struct v4l2_subdev_internal_ops dw9714_int_ops = {
 	.close = dw9714_close,
 };
 
-static const struct v4l2_subdev_ops dw9714_ops = { };
+static const struct v4l2_subdev_core_ops dw9714_core_ops = {
+	.log_status = v4l2_ctrl_subdev_log_status,
+	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
+	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
+};
+
+static const struct v4l2_subdev_ops dw9714_ops = {
+	.core = &dw9714_core_ops,
+};
 
 static void dw9714_subdev_cleanup(struct dw9714_device *dw9714_dev)
 {
@@ -137,7 +146,8 @@ static int dw9714_probe(struct i2c_client *client)
 		return -ENOMEM;
 
 	v4l2_i2c_subdev_init(&dw9714_dev->sd, client, &dw9714_ops);
-	dw9714_dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	dw9714_dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
+				V4L2_SUBDEV_FL_HAS_EVENTS;
 	dw9714_dev->sd.internal_ops = &dw9714_int_ops;
 
 	rval = dw9714_init_controls(dw9714_dev);
-- 
2.33.0.685.g46640cef36-goog

[PATCH 6/7] media: ov13858: Add implementation for events

[Ricardo Ribalda]

Use v4l2 control API helpers to support the events.

Fixes v4l2-compliance:

test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
---
 drivers/media/i2c/ov13858.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/ov13858.c b/drivers/media/i2c/ov13858.c
index 7fc70af53e45d..b4d22f5d99337 100644
--- a/drivers/media/i2c/ov13858.c
+++ b/drivers/media/i2c/ov13858.c
@@ -7,6 +7,7 @@
 #include <linux/pm_runtime.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
+#include <media/v4l2-event.h>
 #include <media/v4l2-fwnode.h>
 
 #define OV13858_REG_VALUE_08BIT		1
@@ -1553,6 +1554,12 @@ static int ov13858_identify_module(struct ov13858 *ov13858)
 	return 0;
 }
 
+static const struct v4l2_subdev_core_ops ov13858_core_ops = {
+	.log_status = v4l2_ctrl_subdev_log_status,
+	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
+	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
+};
+
 static const struct v4l2_subdev_video_ops ov13858_video_ops = {
 	.s_stream = ov13858_set_stream,
 };
@@ -1569,6 +1576,7 @@ static const struct v4l2_subdev_sensor_ops ov13858_sensor_ops = {
 };
 
 static const struct v4l2_subdev_ops ov13858_subdev_ops = {
+	.core = &ov13858_core_ops,
 	.video = &ov13858_video_ops,
 	.pad = &ov13858_pad_ops,
 	.sensor = &ov13858_sensor_ops,
@@ -1724,7 +1732,8 @@ static int ov13858_probe(struct i2c_client *client,
 
 	/* Initialize subdev */
 	ov13858->sd.internal_ops = &ov13858_internal_ops;
-	ov13858->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	ov13858->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
+			     V4L2_SUBDEV_FL_HAS_EVENTS;
 	ov13858->sd.entity.ops = &ov13858_subdev_entity_ops;
 	ov13858->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
 
-- 
2.33.0.685.g46640cef36-goog

[PATCH 7/7] media: ov5670: Add implementation for events

[Ricardo Ribalda]

Use v4l2 control API helpers to support the events.

Fixes v4l2-compliance:

test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
---
 drivers/media/i2c/ov5670.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/ov5670.c b/drivers/media/i2c/ov5670.c
index 49189926afd67..251f459ab484a 100644
--- a/drivers/media/i2c/ov5670.c
+++ b/drivers/media/i2c/ov5670.c
@@ -7,6 +7,7 @@
 #include <linux/pm_runtime.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
+#include <media/v4l2-event.h>
 #include <media/v4l2-fwnode.h>
 
 #define OV5670_REG_CHIP_ID		0x300a
@@ -2420,6 +2421,12 @@ static int ov5670_identify_module(struct ov5670 *ov5670)
 	return 0;
 }
 
+static const struct v4l2_subdev_core_ops ov5670_core_ops = {
+	.log_status = v4l2_ctrl_subdev_log_status,
+	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
+	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
+};
+
 static const struct v4l2_subdev_video_ops ov5670_video_ops = {
 	.s_stream = ov5670_set_stream,
 };
@@ -2436,6 +2443,7 @@ static const struct v4l2_subdev_sensor_ops ov5670_sensor_ops = {
 };
 
 static const struct v4l2_subdev_ops ov5670_subdev_ops = {
+	.core = &ov5670_core_ops,
 	.video = &ov5670_video_ops,
 	.pad = &ov5670_pad_ops,
 	.sensor = &ov5670_sensor_ops,
@@ -2489,7 +2497,8 @@ static int ov5670_probe(struct i2c_client *client)
 	}
 
 	ov5670->sd.internal_ops = &ov5670_internal_ops;
-	ov5670->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	ov5670->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
+			    V4L2_SUBDEV_FL_HAS_EVENTS;
 	ov5670->sd.entity.ops = &ov5670_subdev_entity_ops;
 	ov5670->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
 
-- 
2.33.0.685.g46640cef36-goog

Re: [PATCH 0/7] media: ipu3 i2c: Fix v4l2-compliance issues

[Bingbu Cao]

Ricardo, thanks for your patch.

On 9/29/21 5:10 AM, Ricardo Ribalda wrote:
> Fix some issues found with v4l2-compliance. Tested in Soraka which also
> has some subdevices that had some issues with v4l2-compliance.
> 
> Ricardo Ribalda (7):
...

>   media: ipu3-cio2: Set valid initial format
>   media: ipu3-cio2: imgu_fmt: Handle properly try
>   media: ipu3-cio2: VIDIOC_QUERYCAP: Fix bus_info

These 3 should be staging ImgU category, not cio2 :).

>   media: dw9714: Add implementation for events
>   media: ov13858: Add implementation for events
>   media: ov5670: Add implementation for events
> 
>  drivers/media/i2c/dw9714.c                    | 14 ++++++++++++--
>  drivers/media/i2c/ov13858.c                   | 11 ++++++++++-
>  drivers/media/i2c/ov5670.c                    | 11 ++++++++++-
>  drivers/media/pci/intel/ipu3/ipu3-cio2-main.c |  8 ++++++--
>  drivers/staging/media/ipu3/ipu3-v4l2.c        |  9 +++++----
>  5 files changed, 43 insertions(+), 10 deletions(-)
> 

-- 
Best regards,
Bingbu Cao

Re: [PATCH 1/7] media: ipu3-cio2: Check num_planes and sizes in queue_setup

[Bingbu Cao]

Ricardo, thanks for your patch.

Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>

On 9/29/21 5:10 AM, Ricardo Ribalda wrote:
> if (*num_planes && sizes[i] < q->format.plane_fmt[i].sizeimage)

-- 
Best regards,
Bingbu Cao

Re: [PATCH 4/7] media: ipu3-cio2: VIDIOC_QUERYCAP: Fix bus_info

[Bingbu Cao]

Besides the subject,

Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>

On 9/29/21 5:10 AM, Ricardo Ribalda wrote:
> bus_info field had a different value for the media entity and the video
> device.
> 
> Fixes v4l2-compliance:
> 
> v4l2-compliance.cpp(637): media bus_info 'PCI:0000:00:05.0' differs from
> 			  V4L2 bus_info 'PCI:viewfinder'
> 
> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
> ---
>  drivers/staging/media/ipu3/ipu3-v4l2.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/staging/media/ipu3/ipu3-v4l2.c b/drivers/staging/media/ipu3/ipu3-v4l2.c
> index 66995c6f15808..2594ac4eb0763 100644
> --- a/drivers/staging/media/ipu3/ipu3-v4l2.c
> +++ b/drivers/staging/media/ipu3/ipu3-v4l2.c
> @@ -592,11 +592,12 @@ static const struct imgu_fmt *find_format(struct v4l2_format *f, u32 type)
>  static int imgu_vidioc_querycap(struct file *file, void *fh,
>  				struct v4l2_capability *cap)
>  {
> -	struct imgu_video_device *node = file_to_intel_imgu_node(file);
> +	struct imgu_device *imgu = video_drvdata(file);
>  
>  	strscpy(cap->driver, IMGU_NAME, sizeof(cap->driver));
>  	strscpy(cap->card, IMGU_NAME, sizeof(cap->card));
> -	snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s", node->name);
> +	snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s",
> +		 pci_name(imgu->pci_dev));
>  
>  	return 0;
>  }
> 

-- 
Best regards,
Bingbu Cao

Re: [PATCH 2/7] media: ipu3-cio2: Set valid initial format

[Sakari Ailus]

Hi Ricardo,

On Tue, Sep 28, 2021 at 09:10:28PM +0000, Ricardo Ribalda wrote:
> The initial format did not have a valid size.
> 
> Fixes v4l2-compliance:
> 
> fail: v4l2-test-formats.cpp(723): Video Output Multiplanar:
> 				  TRY_FMT(G_FMT) != G_FMT
> test VIDIOC_TRY_FMT: FAIL
> 
> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
> ---
>  drivers/staging/media/ipu3/ipu3-v4l2.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/staging/media/ipu3/ipu3-v4l2.c b/drivers/staging/media/ipu3/ipu3-v4l2.c
> index 38a2407645096..fbb9eb2ba99e4 100644
> --- a/drivers/staging/media/ipu3/ipu3-v4l2.c
> +++ b/drivers/staging/media/ipu3/ipu3-v4l2.c
> @@ -1136,7 +1136,7 @@ static int imgu_v4l2_node_setup(struct imgu_device *imgu, unsigned int pipe,
>  	def_pix_fmt.height = def_bus_fmt.height;
>  	def_pix_fmt.field = def_bus_fmt.field;
>  	def_pix_fmt.num_planes = 1;
> -	def_pix_fmt.plane_fmt[0].bytesperline = def_pix_fmt.width * 2;
> +	def_pix_fmt.plane_fmt[0].bytesperline = 2496;

Please derive the value from the width, don't use a number here.

-- 
Regards,

Sakari Ailus