Hello Greg,

[adding Rob and devicetree@vger to Cc:]

On Fri, May 28, 2021 at 11:03:54AM +0200, Greg Kroah-Hartman wrote:
> On Fri, May 28, 2021 at 02:49:52AM +0200, Sebastian Reichel wrote:
> > On Sat, May 01, 2021 at 08:11:52AM +0200, Greg Kroah-Hartman wrote:
> > > On Fri, Apr 30, 2021 at 07:50:36PM +0200, Sebastian Reichel wrote:
> > > > IMHO PATCHv4 was better, but in the end I don't have strong feelings
> > > > about this. Btw. I think this patchset is a good demonstration of
> > > > frustrating upstream kernel development can be considering PATCHv5
> > > > is basically the same as PATCHv1. Thanks for making us go in
> > > > circles :(

I was the one who objected the v1 approach. My frustration is that I
wasn't Cc:d in the later iterations of this patch set. And I also liked
v4 better :-\

> > > > Changes since PATCHv4:
> > > >  * https://lore.kernel.org/lkml/20210305115058.92284-1-sebastian.reichel@collabora.com/
> > > >  * use DT property instead of sysfs config option, like the initial patch
> > > >    version did as requested by Greg.
> > > > 
> > > > Changes since PATCHv3:
> > > >  * https://lore.kernel.org/lkml/1539249903-6316-1-git-send-email-fabien.lahoudere@collabora.com/
> > > >  * rewrote commit message to provide a lot more details why this is needed
> > > >  * rebased to torvalds/master (5.12-rc1-dontuse), also applies on top of linux-next
> > > >  * use sysfs_emit() instead of sprintf
> > > > 
> > > > -- Sebastian
> > > > 
> > > > Fabien Lahoudere (2):
> > > >   serial: imx: Add DMA buffer configuration via DT
> > > >   ARM: dts: imx53-ppd: add dma-info nodes
> > > > 
> > > >  .../bindings/serial/fsl-imx-uart.yaml         | 12 +++++++++
> > > >  arch/arm/boot/dts/imx53-ppd.dts               |  2 ++
> > > >  drivers/tty/serial/imx.c                      | 25 +++++++++++++------
> > > >  3 files changed, 32 insertions(+), 7 deletions(-)
> > >
> > > This is the friendly semi-automated patch-bot of Greg Kroah-Hartman.
> > > You have sent him a patch that has triggered this response.
> > > 
> > > Right now, the development tree you have sent a patch for is "closed"
> > > due to the timing of the merge window.  Don't worry, the patch(es) you
> > > have sent are not lost, and will be looked at after the merge window is
> > > over (after the -rc1 kernel is released by Linus).
> > > 
> > > So thank you for your patience and your patches will be reviewed at this
> > > later time, you do not have to do anything further, this is just a short
> > > note to let you know the patch status and so you don't worry they didn't
> > > make it through.
> > > 
> > > thanks,
> > > 
> > > greg k-h's patch email bot
> > 
> > Any update on this? :)
> 
> I'm waiting for the DT maintainers to review the new changes before I
> can take the driver changes.

I wonder what the DT maintainers said (and where [1]). The patch was
applied (db0a196bd8ad1d6bb4b1a9e54f54c09f8dc2cc25) and I think that's
wrong (as it was in v1) because fsl,dma-info isn't about hardware
description but about software tuning for different use cases.

Best regards
Uwe

[1] neither my mailbox nor lore.kernel.org know about an answer.

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |