From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de
Cc: robh+dt@kernel.org, linus.walleij@linaro.org,
linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 2/3] ARM: dts: rockchip: change gpio nodenames
Date: Thu, 7 Oct 2021 16:40:18 +0200 [thread overview]
Message-ID: <20211007144019.7461-2-jbx6244@gmail.com> (raw)
In-Reply-To: <20211007144019.7461-1-jbx6244@gmail.com>
Currently all gpio nodenames are sort of identical to there label.
Nodenames should be of a generic type, so change them all.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/boot/dts/rk3036.dtsi | 6 +++---
arch/arm/boot/dts/rk3066a.dtsi | 12 ++++++------
arch/arm/boot/dts/rk3188.dtsi | 8 ++++----
arch/arm/boot/dts/rk322x.dtsi | 8 ++++----
arch/arm/boot/dts/rk3288.dtsi | 18 +++++++++---------
arch/arm/boot/dts/rv1108.dtsi | 8 ++++----
6 files changed, 30 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index ffa9bc7ed..9d2d44381 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -575,7 +575,7 @@
#size-cells = <1>;
ranges;
- gpio0: gpio0@2007c000 {
+ gpio0: gpio@2007c000 {
compatible = "rockchip,gpio-bank";
reg = <0x2007c000 0x100>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
@@ -588,7 +588,7 @@
#interrupt-cells = <2>;
};
- gpio1: gpio1@20080000 {
+ gpio1: gpio@20080000 {
compatible = "rockchip,gpio-bank";
reg = <0x20080000 0x100>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
@@ -601,7 +601,7 @@
#interrupt-cells = <2>;
};
- gpio2: gpio2@20084000 {
+ gpio2: gpio@20084000 {
compatible = "rockchip,gpio-bank";
reg = <0x20084000 0x100>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index ae4055428..6688a1a3b 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -273,7 +273,7 @@
#size-cells = <1>;
ranges;
- gpio0: gpio0@20034000 {
+ gpio0: gpio@20034000 {
compatible = "rockchip,gpio-bank";
reg = <0x20034000 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
@@ -286,7 +286,7 @@
#interrupt-cells = <2>;
};
- gpio1: gpio1@2003c000 {
+ gpio1: gpio@2003c000 {
compatible = "rockchip,gpio-bank";
reg = <0x2003c000 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -299,7 +299,7 @@
#interrupt-cells = <2>;
};
- gpio2: gpio2@2003e000 {
+ gpio2: gpio@2003e000 {
compatible = "rockchip,gpio-bank";
reg = <0x2003e000 0x100>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
@@ -312,7 +312,7 @@
#interrupt-cells = <2>;
};
- gpio3: gpio3@20080000 {
+ gpio3: gpio@20080000 {
compatible = "rockchip,gpio-bank";
reg = <0x20080000 0x100>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
@@ -325,7 +325,7 @@
#interrupt-cells = <2>;
};
- gpio4: gpio4@20084000 {
+ gpio4: gpio@20084000 {
compatible = "rockchip,gpio-bank";
reg = <0x20084000 0x100>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
@@ -338,7 +338,7 @@
#interrupt-cells = <2>;
};
- gpio6: gpio6@2000a000 {
+ gpio6: gpio@2000a000 {
compatible = "rockchip,gpio-bank";
reg = <0x2000a000 0x100>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 2c606494b..3e5786e07 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -223,7 +223,7 @@
#size-cells = <1>;
ranges;
- gpio0: gpio0@2000a000 {
+ gpio0: gpio@2000a000 {
compatible = "rockchip,rk3188-gpio-bank0";
reg = <0x2000a000 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
@@ -236,7 +236,7 @@
#interrupt-cells = <2>;
};
- gpio1: gpio1@2003c000 {
+ gpio1: gpio@2003c000 {
compatible = "rockchip,gpio-bank";
reg = <0x2003c000 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -249,7 +249,7 @@
#interrupt-cells = <2>;
};
- gpio2: gpio2@2003e000 {
+ gpio2: gpio@2003e000 {
compatible = "rockchip,gpio-bank";
reg = <0x2003e000 0x100>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
@@ -262,7 +262,7 @@
#interrupt-cells = <2>;
};
- gpio3: gpio3@20080000 {
+ gpio3: gpio@20080000 {
compatible = "rockchip,gpio-bank";
reg = <0x20080000 0x100>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 75af99c76..3e36cec36 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -946,7 +946,7 @@
#size-cells = <1>;
ranges;
- gpio0: gpio0@11110000 {
+ gpio0: gpio@11110000 {
compatible = "rockchip,gpio-bank";
reg = <0x11110000 0x100>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
@@ -959,7 +959,7 @@
#interrupt-cells = <2>;
};
- gpio1: gpio1@11120000 {
+ gpio1: gpio@11120000 {
compatible = "rockchip,gpio-bank";
reg = <0x11120000 0x100>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
@@ -972,7 +972,7 @@
#interrupt-cells = <2>;
};
- gpio2: gpio2@11130000 {
+ gpio2: gpio@11130000 {
compatible = "rockchip,gpio-bank";
reg = <0x11130000 0x100>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
@@ -985,7 +985,7 @@
#interrupt-cells = <2>;
};
- gpio3: gpio3@11140000 {
+ gpio3: gpio@11140000 {
compatible = "rockchip,gpio-bank";
reg = <0x11140000 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 4dcdcf17c..096f5bb22 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -1422,7 +1422,7 @@
#size-cells = <2>;
ranges;
- gpio0: gpio0@ff750000 {
+ gpio0: gpio@ff750000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff750000 0x0 0x100>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -1435,7 +1435,7 @@
#interrupt-cells = <2>;
};
- gpio1: gpio1@ff780000 {
+ gpio1: gpio@ff780000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff780000 0x0 0x100>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -1448,7 +1448,7 @@
#interrupt-cells = <2>;
};
- gpio2: gpio2@ff790000 {
+ gpio2: gpio@ff790000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff790000 0x0 0x100>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -1461,7 +1461,7 @@
#interrupt-cells = <2>;
};
- gpio3: gpio3@ff7a0000 {
+ gpio3: gpio@ff7a0000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff7a0000 0x0 0x100>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -1474,7 +1474,7 @@
#interrupt-cells = <2>;
};
- gpio4: gpio4@ff7b0000 {
+ gpio4: gpio@ff7b0000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff7b0000 0x0 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -1487,7 +1487,7 @@
#interrupt-cells = <2>;
};
- gpio5: gpio5@ff7c0000 {
+ gpio5: gpio@ff7c0000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff7c0000 0x0 0x100>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
@@ -1500,7 +1500,7 @@
#interrupt-cells = <2>;
};
- gpio6: gpio6@ff7d0000 {
+ gpio6: gpio@ff7d0000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff7d0000 0x0 0x100>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
@@ -1513,7 +1513,7 @@
#interrupt-cells = <2>;
};
- gpio7: gpio7@ff7e0000 {
+ gpio7: gpio@ff7e0000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff7e0000 0x0 0x100>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
@@ -1526,7 +1526,7 @@
#interrupt-cells = <2>;
};
- gpio8: gpio8@ff7f0000 {
+ gpio8: gpio@ff7f0000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff7f0000 0x0 0x100>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index 24d56849a..db7166ed8 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -600,7 +600,7 @@
#size-cells = <1>;
ranges;
- gpio0: gpio0@20030000 {
+ gpio0: gpio@20030000 {
compatible = "rockchip,gpio-bank";
reg = <0x20030000 0x100>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
@@ -613,7 +613,7 @@
#interrupt-cells = <2>;
};
- gpio1: gpio1@10310000 {
+ gpio1: gpio@10310000 {
compatible = "rockchip,gpio-bank";
reg = <0x10310000 0x100>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
@@ -626,7 +626,7 @@
#interrupt-cells = <2>;
};
- gpio2: gpio2@10320000 {
+ gpio2: gpio@10320000 {
compatible = "rockchip,gpio-bank";
reg = <0x10320000 0x100>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
@@ -639,7 +639,7 @@
#interrupt-cells = <2>;
};
- gpio3: gpio3@10330000 {
+ gpio3: gpio@10330000 {
compatible = "rockchip,gpio-bank";
reg = <0x10330000 0x100>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
--
2.20.1
next prev parent reply other threads:[~2021-10-07 14:40 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-07 14:40 [PATCH v3 1/3] dt-bindings: pinctrl: convert rockchip,pinctrl.txt to YAML Johan Jonker
2021-10-07 14:40 ` Johan Jonker [this message]
2021-10-13 23:07 ` [PATCH v3 2/3] ARM: dts: rockchip: change gpio nodenames Heiko Stübner
2021-10-07 14:40 ` [PATCH v3 3/3] arm64: " Johan Jonker
2021-10-13 23:07 ` Heiko Stübner
2021-10-08 2:46 ` [PATCH v3 1/3] dt-bindings: pinctrl: convert rockchip,pinctrl.txt to YAML Rob Herring
2021-10-13 22:31 ` Linus Walleij
2021-10-13 23:06 ` Heiko Stübner
2021-10-14 12:46 ` Rob Herring
2021-10-16 22:15 ` Linus Walleij
2021-10-17 8:28 ` (subset) [PATCH v3 1/3] dt-bindings: pinctrl: convert rockchip, pinctrl.txt " Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211007144019.7461-2-jbx6244@gmail.com \
--to=jbx6244@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).