From: Bjorn Helgaas <helgaas@kernel.org>
To: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>,
nic_swsd <nic_swsd@realtek.com>,
Bjorn Helgaas <bhelgaas@google.com>,
David Miller <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Anthony Wong <anthony.wong@canonical.com>,
Linux Netdev List <netdev@vger.kernel.org>,
Linux PCI <linux-pci@vger.kernel.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: [RFC] [PATCH net-next v5 0/3] r8169: Implement dynamic ASPM mechanism for recent 1.0/2.5Gbps Realtek NICs
Date: Fri, 8 Oct 2021 08:56:55 -0500 [thread overview]
Message-ID: <20211008135655.GA1326714@bhelgaas> (raw)
In-Reply-To: <CAAd53p409uhbor1ArZ=kfiMK2JRHVGVyYukDSSyDvFsVSs=ErQ@mail.gmail.com>
On Fri, Oct 01, 2021 at 12:17:26PM +0800, Kai-Heng Feng wrote:
> On Sat, Sep 18, 2021 at 6:09 AM Bjorn Helgaas <helgaas@kernel.org> wrote:
> > On Thu, Sep 16, 2021 at 11:44:14PM +0800, Kai-Heng Feng wrote:
> > > The purpose of the series is to get comments and reviews so we can merge
> > > and test the series in downstream kernel.
> > >
> > > The latest Realtek vendor driver and its Windows driver implements a
> > > feature called "dynamic ASPM" which can improve performance on it's
> > > ethernet NICs.
> > >
> > > Heiner Kallweit pointed out the potential root cause can be that the
> > > buffer is too small for its ASPM exit latency.
> >
> > I looked at the lspci data in your bugzilla
> > (https://bugzilla.kernel.org/show_bug.cgi?id=214307).
> >
> > L1.2 is enabled, which requires the Latency Tolerance Reporting
> > capability, which helps determine when the Link will be put in L1.2.
> > IIUC, these are analogous to the DevCap "Acceptable Latency" values.
> > Zero latency values indicate the device will be impacted by any delay
> > (PCIe r5.0, sec 6.18).
> >
> > Linux does not currently program those values, so the values there
> > must have been set by the BIOS. On the working AMD system, they're
> > set to 1048576ns, while on the broken Intel system, they're set to
> > 3145728ns.
> >
> > I don't really understand how these values should be computed, and I
> > think they depend on some electrical characteristics of the Link, so
> > I'm not sure it's *necessarily* a problem that they are different.
> > But a 3X difference does seem pretty large.
> >
> > So I'm curious whether this is related to the problem. Here are some
> > things we could try on the broken Intel system:
>
> Original network speed, tested via iperf3:
> TX: ~255 Mbps
> RX: ~490 Mbps
>
> > - What happens if you disable ASPM L1.2 using
> > /sys/devices/pci*/.../link/l1_2_aspm?
>
> TX: ~670 Mbps
> RX: ~670 Mbps
Do you remember if there were any dropped packets here? You mentioned
at [1] that you have also seen reports of issues with L0s and L1.1.
If you disable L1.2, L0s and L1.1 *should* still be enabled.
[1] https://lore.kernel.org/r/CAAd53p4v+CmupCu2+3vY5N64WKkxcNvpk1M7+hhNoposx+aYCg@mail.gmail.com
prev parent reply other threads:[~2021-10-08 13:57 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-16 15:44 [RFC] [PATCH net-next v5 0/3] r8169: Implement dynamic ASPM mechanism for recent 1.0/2.5Gbps Realtek NICs Kai-Heng Feng
2021-09-16 15:44 ` [RFC] [PATCH net-next v5 1/3] PCI/ASPM: Introduce a new helper to report ASPM capability Kai-Heng Feng
2021-09-16 15:44 ` [RFC] [PATCH net-next v5 2/3] r8169: Use PCIe ASPM status for NIC ASPM enablement Kai-Heng Feng
2021-09-16 17:07 ` Bjorn Helgaas
2021-09-17 4:09 ` Kai-Heng Feng
2021-09-17 15:26 ` Bjorn Helgaas
2021-10-01 4:32 ` Kai-Heng Feng
2021-09-16 15:44 ` [RFC] [PATCH net-next v5 3/3] r8169: Implement dynamic ASPM mechanism Kai-Heng Feng
2021-09-16 17:12 ` Bjorn Helgaas
2021-09-17 4:19 ` Kai-Heng Feng
2021-09-17 22:09 ` [RFC] [PATCH net-next v5 0/3] r8169: Implement dynamic ASPM mechanism for recent 1.0/2.5Gbps Realtek NICs Bjorn Helgaas
2021-10-01 4:17 ` Kai-Heng Feng
2021-10-07 19:10 ` Bjorn Helgaas
2021-10-08 13:56 ` Bjorn Helgaas [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211008135655.GA1326714@bhelgaas \
--to=helgaas@kernel.org \
--cc=anthony.wong@canonical.com \
--cc=bhelgaas@google.com \
--cc=davem@davemloft.net \
--cc=hkallweit1@gmail.com \
--cc=kai.heng.feng@canonical.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).