From: Sam Shih <sam.shih@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Hsin-Yi Wang <hsinyi@chromium.org>,
Enric Balletbo i Serra <enric.balletbo@collabora.com>,
Fabien Parent <fparent@baylibre.com>,
Seiya Wang <seiya.wang@mediatek.com>,
Sean Wang <sean.wang@mediatek.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>
Cc: John Crispin <john@phrozen.org>,
Ryder Lee <Ryder.Lee@mediatek.com>,
Sam Shih <sam.shih@mediatek.com>
Subject: [PATCH v6 3/3] arm64: dts: mediatek: add basic mt7986b support
Date: Thu, 14 Oct 2021 15:44:03 +0800 [thread overview]
Message-ID: <20211014074403.17346-4-sam.shih@mediatek.com> (raw)
In-Reply-To: <20211014074403.17346-1-sam.shih@mediatek.com>
Add basic chip support for Mediatek mt7986b, include
basic uart nodes, rng node and watchdog node.
Add cpu node, timer node, gic node, psci and reserved-memory node
for ARM Trusted Firmware.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
v6: separate basic part into a single patch series
v5: follow reviewr's comment: removed clock freqency node in timer due to
we have set CNTFRQ_EL0 in ATF firmware, and also corrected GICD range
v4: added missing gic register bases, and fixed range of GICR
v3: used the stdout-path instead of console=ttyS0
v2: modified clock and uart node due to clock driver updated
---
arch/arm64/boot/dts/mediatek/Makefile | 1 +
arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 26 ++++
arch/arm64/boot/dts/mediatek/mt7986b.dtsi | 149 +++++++++++++++++++
3 files changed, 176 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b.dtsi
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index e6c3a73b9e4a..d555e43d1ccc 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
new file mode 100644
index 000000000000..95a202505bb2
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt7986b.dtsi"
+
+/ {
+ model = "MediaTek MT7986b RFB";
+ compatible = "mediatek,mt7986b-rfb";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
new file mode 100644
index 000000000000..2b8e0a382398
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "mediatek,mt7986b";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ system_clk: dummy40m {
+ compatible = "fixed-clock";
+ clock-frequency = <40000000>;
+ #clock-cells = <0>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x0>;
+ #cooling-cells = <2>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x1>;
+ #cooling-cells = <2>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ enable-method = "psci";
+ reg = <0x2>;
+ #cooling-cells = <2>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ enable-method = "psci";
+ compatible = "arm,cortex-a53";
+ reg = <0x3>;
+ #cooling-cells = <2>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ /* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+ secmon_reserved: secmon@43000000 {
+ reg = <0 0x43000000 0 0x30000>;
+ no-map;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ gic: interrupt-controller@c000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ reg = <0 0x0c000000 0 0x10000>, /* GICD */
+ <0 0x0c080000 0 0x80000>, /* GICR */
+ <0 0x0c400000 0 0x2000>, /* GICC */
+ <0 0x0c410000 0 0x1000>, /* GICH */
+ <0 0x0c420000 0 0x2000>; /* GICV */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ watchdog: watchdog@1001c000 {
+ compatible = "mediatek,mt7986-wdt",
+ "mediatek,mt6589-wdt";
+ reg = <0 0x1001c000 0 0x1000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ #reset-cells = <1>;
+ status = "disabled";
+ };
+
+ trng: trng@1020f000 {
+ compatible = "mediatek,mt7986-rng",
+ "mediatek,mt7623-rng";
+ reg = <0 0x1020f000 0 0x100>;
+ clocks = <&system_clk>;
+ clock-names = "rng";
+ status = "disabled";
+ };
+
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt7986-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x400>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&system_clk>;
+ status = "disabled";
+ };
+
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt7986-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x400>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&system_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@11004000 {
+ compatible = "mediatek,mt7986-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11004000 0 0x400>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&system_clk>;
+ status = "disabled";
+ };
+
+ };
+
+};
--
2.29.2
next prev parent reply other threads:[~2021-10-14 7:50 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-14 7:44 [PATCH v6 0/3] Add basic SoC support for mediatek mt7986 Sam Shih
2021-10-14 7:44 ` [PATCH v6 1/3] dt-bindings: arm64: dts: mediatek: Add mt7986 series Sam Shih
2021-10-14 7:44 ` [PATCH v6 2/3] arm64: dts: mediatek: add basic mt7986a support Sam Shih
2021-10-14 7:44 ` Sam Shih [this message]
2021-10-14 15:32 ` [PATCH v6 3/3] arm64: dts: mediatek: add basic mt7986b support Matthias Brugger
2021-10-15 1:41 ` Sam Shih
2021-10-22 5:57 ` Sam Shih
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211014074403.17346-4-sam.shih@mediatek.com \
--to=sam.shih@mediatek.com \
--cc=Ryder.Lee@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=enric.balletbo@collabora.com \
--cc=fparent@baylibre.com \
--cc=hsinyi@chromium.org \
--cc=john@phrozen.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=sean.wang@mediatek.com \
--cc=seiya.wang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).