* [PATCH v1 1/3] dt-bindings: vendor-prefixes: Add an entry for JOZ BV
@ 2021-10-14 8:33 Oleksij Rempel
2021-10-14 8:33 ` [PATCH v1 2/3] dt-bindings: arm: fsl: add JOZ Access Point Oleksij Rempel
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Oleksij Rempel @ 2021-10-14 8:33 UTC (permalink / raw)
To: Rob Herring, Sascha Hauer, Shawn Guo
Cc: Oleksij Rempel, devicetree, Fabio Estevam, linux-arm-kernel,
linux-kernel, NXP Linux Team, Pengutronix Kernel Team,
David Jander
Add "joz" entry for JOZ BV: https://joz.nl/en/about-joz/
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index a867f7102c35..9dc0535d0fe6 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -579,6 +579,8 @@ patternProperties:
description: Shenzhen Jesurun Electronics Business Dept.
"^jianda,.*":
description: Jiandangjing Technology Co., Ltd.
+ "^joz,.*":
+ description: JOZ BV
"^kam,.*":
description: Kamstrup A/S
"^karo,.*":
--
2.30.2
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v1 2/3] dt-bindings: arm: fsl: add JOZ Access Point 2021-10-14 8:33 [PATCH v1 1/3] dt-bindings: vendor-prefixes: Add an entry for JOZ BV Oleksij Rempel @ 2021-10-14 8:33 ` Oleksij Rempel 2021-10-26 21:13 ` Rob Herring 2021-10-14 8:33 ` [PATCH v1 3/3] ARM: dts: " Oleksij Rempel 2021-10-26 21:12 ` [PATCH v1 1/3] dt-bindings: vendor-prefixes: Add an entry for JOZ BV Rob Herring 2 siblings, 1 reply; 7+ messages in thread From: Oleksij Rempel @ 2021-10-14 8:33 UTC (permalink / raw) To: Rob Herring, Sascha Hauer, Shawn Guo Cc: Oleksij Rempel, devicetree, Fabio Estevam, linux-arm-kernel, linux-kernel, NXP Linux Team, Pengutronix Kernel Team, David Jander Add imx6ull based JOZ Access Point. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 60f4862ba15e..66a021b0ec9b 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -584,6 +584,7 @@ properties: items: - enum: - fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board + - joz,jozacp # JOZ Access Point - kontron,imx6ull-n6411-som # Kontron N6411 SOM - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Eval Board -- 2.30.2 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v1 2/3] dt-bindings: arm: fsl: add JOZ Access Point 2021-10-14 8:33 ` [PATCH v1 2/3] dt-bindings: arm: fsl: add JOZ Access Point Oleksij Rempel @ 2021-10-26 21:13 ` Rob Herring 0 siblings, 0 replies; 7+ messages in thread From: Rob Herring @ 2021-10-26 21:13 UTC (permalink / raw) To: Oleksij Rempel Cc: Fabio Estevam, linux-kernel, Shawn Guo, NXP Linux Team, Sascha Hauer, Pengutronix Kernel Team, linux-arm-kernel, David Jander, devicetree, Rob Herring On Thu, 14 Oct 2021 10:33:12 +0200, Oleksij Rempel wrote: > Add imx6ull based JOZ Access Point. > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> > --- > Documentation/devicetree/bindings/arm/fsl.yaml | 1 + > 1 file changed, 1 insertion(+) > Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v1 3/3] ARM: dts: add JOZ Access Point 2021-10-14 8:33 [PATCH v1 1/3] dt-bindings: vendor-prefixes: Add an entry for JOZ BV Oleksij Rempel 2021-10-14 8:33 ` [PATCH v1 2/3] dt-bindings: arm: fsl: add JOZ Access Point Oleksij Rempel @ 2021-10-14 8:33 ` Oleksij Rempel 2021-11-21 2:06 ` Shawn Guo 2021-10-26 21:12 ` [PATCH v1 1/3] dt-bindings: vendor-prefixes: Add an entry for JOZ BV Rob Herring 2 siblings, 1 reply; 7+ messages in thread From: Oleksij Rempel @ 2021-10-14 8:33 UTC (permalink / raw) To: Rob Herring, Sascha Hauer, Shawn Guo Cc: Oleksij Rempel, devicetree, Fabio Estevam, linux-arm-kernel, linux-kernel, NXP Linux Team, Pengutronix Kernel Team, David Jander JOZ Access Point is imx6ull based device designed for agricultural cleaning machines. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6ull-jozacp.dts | 457 +++++++++++++++++++++++++++ 2 files changed, 458 insertions(+) create mode 100644 arch/arm/boot/dts/imx6ull-jozacp.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 936aa3e65ce7..1f73806b99c2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -676,6 +676,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-colibri-emmc-eval-v3.dtb \ imx6ull-colibri-eval-v3.dtb \ imx6ull-colibri-wifi-eval-v3.dtb \ + imx6ull-jozacp.dtb \ imx6ull-myir-mys-6ulx-eval.dtb \ imx6ull-opos6uldev.dtb \ imx6ull-phytec-segin-ff-rdk-nand.dtb \ diff --git a/arch/arm/boot/dts/imx6ull-jozacp.dts b/arch/arm/boot/dts/imx6ull-jozacp.dts new file mode 100644 index 000000000000..1d779440b609 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-jozacp.dts @@ -0,0 +1,457 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2020 Protonic Holland + * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "imx6ull.dtsi" + +/ { + model = "JOZ Access Point"; + compatible = "joz,jozacp", "fsl,imx6ull"; + + chosen { + stdout-path = &uart1; + }; + + /* On board name LED_RGB1 */ + led-controller-1 { + compatible = "pwm-leds"; + + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <0>; + pwms = <&pwm1 0 10000000 0>; + max-brightness = <255>; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + pwms = <&pwm3 0 10000000 0>; + max-brightness = <255>; + }; + + led-2 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + pwms = <&pwm5 0 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "heartbeat"; + }; + }; + + /* On board name LED_RGB2 */ + led-controller-2 { + compatible = "pwm-leds"; + + led-3 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + pwms = <&pwm2 0 10000000 0>; + max-brightness = <255>; + }; + + led-4 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <4>; + pwms = <&pwm4 0 10000000 0>; + max-brightness = <255>; + }; + + led-5 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <5>; + pwms = <&pwm6 0 10000000 0>; + max-brightness = <255>; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_5v0>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_vbus: regulator-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vbus>; + regulator-name = "vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_5v0>; + gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_npd>; + reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&cpu0 { + clock-frequency = <792000000>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + interrupts-extended = <&gpio1 29 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&pwm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm5>; + status = "okay"; +}; + +&pwm6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm6>; + status = "okay"; +}; + +&snvs_rtc { + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + dtr-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + vbus-supply = <®_vbus>; + dr_mode = "host"; + over-current-active-low; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + vmmc-supply = <®_3v3>; + bus-width = <8>; + no-1-8-v; + non-removable; + cap-mmc-hw-reset; + no-sd; + no-sdio; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + mmc-pwrseq = <&usdhc2_wifi_pwrseq>; + bus-width = <4>; + no-1-8-v; + no-mmc; + no-sd; + non-removable; + pm-ignore-notify; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b0b0 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + + MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x038b0 + MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x170b0 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* HW Revision */ + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x1b0b0 + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x1b0b0 + + /* HW ID */ + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b0b0 + + /* Digital inputs */ + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x11000 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x11000 + MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x11000 + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x11000 + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x11000 + + /* Isolated outputs */ + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x01020 + MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x01020 + MX6UL_PAD_UART2_RTS_B__GPIO1_IO23 0x01020 + MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x01020 + MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x01020 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001f8b1 + MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001f8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001f8b1 + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001f8b1 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__PWM1_OUT 0x01010 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA01__PWM2_OUT 0x01010 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA02__PWM3_OUT 0x01010 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA03__PWM4_OUT 0x01010 + >; + }; + + pinctrl_pwm5: pwm5grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA18__PWM5_OUT 0x01010 + >; + }; + + pinctrl_pwm6: pwm6grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA19__PWM6_OUT 0x01010 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x1b0b0 + MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x1b0b0 + MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS 0x1b0b0 + MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS 0x1b0b0 + MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x1b0b0 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B 0x17099 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x1f099 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10099 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17099 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17099 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17099 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17099 + MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17099 + MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17099 + MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17099 + MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17099 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x100b9 + MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x170b9 + MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x170b9 + MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x170b9 + MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x170b9 + MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x170b9 + >; + }; + + pinctrl_vbus: vbus0grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x030b0 + >; + }; + + pinctrl_wifi_npd: wifigrp { + fsl,pins = < + /* WL_REG_ON */ + MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x03020 + >; + }; +}; + +&iomuxc_snvs { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_hog>; + + pinctrl_snvs_hog: snvs-hog-grp { + fsl,pins = < + /* Digital outputs */ + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x00020 + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x00020 + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x00020 + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x00020 + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x00020 + + /* Digital outputs fault feedback */ + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17000 + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17000 + MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x17000 + MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x17000 + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x17000 + >; + }; +}; -- 2.30.2 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v1 3/3] ARM: dts: add JOZ Access Point 2021-10-14 8:33 ` [PATCH v1 3/3] ARM: dts: " Oleksij Rempel @ 2021-11-21 2:06 ` Shawn Guo 2021-11-22 10:14 ` Oleksij Rempel 0 siblings, 1 reply; 7+ messages in thread From: Shawn Guo @ 2021-11-21 2:06 UTC (permalink / raw) To: Oleksij Rempel Cc: Rob Herring, Sascha Hauer, devicetree, Fabio Estevam, linux-arm-kernel, linux-kernel, NXP Linux Team, Pengutronix Kernel Team, David Jander On Thu, Oct 14, 2021 at 10:33:13AM +0200, Oleksij Rempel wrote: > JOZ Access Point is imx6ull based device designed for agricultural > cleaning machines. > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/imx6ull-jozacp.dts | 457 +++++++++++++++++++++++++++ > 2 files changed, 458 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6ull-jozacp.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 936aa3e65ce7..1f73806b99c2 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -676,6 +676,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ > imx6ull-colibri-emmc-eval-v3.dtb \ > imx6ull-colibri-eval-v3.dtb \ > imx6ull-colibri-wifi-eval-v3.dtb \ > + imx6ull-jozacp.dtb \ > imx6ull-myir-mys-6ulx-eval.dtb \ > imx6ull-opos6uldev.dtb \ > imx6ull-phytec-segin-ff-rdk-nand.dtb \ > diff --git a/arch/arm/boot/dts/imx6ull-jozacp.dts b/arch/arm/boot/dts/imx6ull-jozacp.dts > new file mode 100644 > index 000000000000..1d779440b609 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6ull-jozacp.dts > @@ -0,0 +1,457 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT > +/* > + * Copyright (c) 2020 Protonic Holland > + * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/leds/common.h> > +#include "imx6ull.dtsi" > + > +/ { > + model = "JOZ Access Point"; > + compatible = "joz,jozacp", "fsl,imx6ull"; > + > + chosen { > + stdout-path = &uart1; > + }; > + > + /* On board name LED_RGB1 */ > + led-controller-1 { > + compatible = "pwm-leds"; > + > + led-0 { > + color = <LED_COLOR_ID_RED>; > + function = LED_FUNCTION_INDICATOR; > + function-enumerator = <0>; > + pwms = <&pwm1 0 10000000 0>; > + max-brightness = <255>; > + }; > + > + led-1 { > + color = <LED_COLOR_ID_GREEN>; > + function = LED_FUNCTION_INDICATOR; > + function-enumerator = <1>; > + pwms = <&pwm3 0 10000000 0>; > + max-brightness = <255>; > + }; > + > + led-2 { > + color = <LED_COLOR_ID_BLUE>; > + function = LED_FUNCTION_INDICATOR; > + function-enumerator = <2>; > + pwms = <&pwm5 0 10000000 0>; > + max-brightness = <255>; > + linux,default-trigger = "heartbeat"; > + }; > + }; > + > + /* On board name LED_RGB2 */ > + led-controller-2 { > + compatible = "pwm-leds"; > + > + led-3 { > + color = <LED_COLOR_ID_RED>; > + function = LED_FUNCTION_INDICATOR; > + function-enumerator = <3>; > + pwms = <&pwm2 0 10000000 0>; > + max-brightness = <255>; > + }; > + > + led-4 { > + color = <LED_COLOR_ID_GREEN>; > + function = LED_FUNCTION_INDICATOR; > + function-enumerator = <4>; > + pwms = <&pwm4 0 10000000 0>; > + max-brightness = <255>; > + }; > + > + led-5 { > + color = <LED_COLOR_ID_BLUE>; > + function = LED_FUNCTION_INDICATOR; > + function-enumerator = <5>; > + pwms = <&pwm6 0 10000000 0>; > + max-brightness = <255>; > + }; > + }; > + > + reg_3v3: regulator-3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "3v3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <®_5v0>; > + }; > + > + reg_5v0: regulator-5v0 { > + compatible = "regulator-fixed"; > + regulator-name = "5v0"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + }; > + > + reg_vbus: regulator-vbus { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_vbus>; > + regulator-name = "vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <®_5v0>; > + gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wifi_npd>; > + reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; > + }; > +}; > + > +&can1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_can1>; > + status = "okay"; > +}; > + > +&cpu0 { > + clock-frequency = <792000000>; > +}; > + > +&fec1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_enet1>; > + phy-mode = "rmii"; > + phy-handle = <ðphy0>; > + status = "okay"; > + > + mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + > + ethphy0: ethernet-phy@0 { > + reg = <0>; > + clocks = <&clks IMX6UL_CLK_ENET_REF>; > + clock-names = "rmii-ref"; > + interrupts-extended = <&gpio1 29 IRQ_TYPE_LEVEL_LOW>; > + reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; > + reset-assert-us = <10000>; > + reset-deassert-us = <300>; > + }; > + }; > +}; > + > +&i2c1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c1>; > + clock-frequency = <100000>; > + status = "okay"; > +}; > + > +&i2c2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c2>; > + clock-frequency = <100000>; > + status = "okay"; > + > + rtc@51 { > + compatible = "nxp,pcf8563"; > + reg = <0x51>; > + }; > +}; > + > +&pwm1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm1>; > + status = "okay"; > +}; > + > +&pwm2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm2>; > + status = "okay"; > +}; > + > +&pwm3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm3>; > + status = "okay"; > +}; > + > +&pwm4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm4>; > + status = "okay"; > +}; > + > +&pwm5 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm5>; > + status = "okay"; > +}; > + > +&pwm6 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm6>; > + status = "okay"; > +}; > + > +&snvs_rtc { > + status = "disabled"; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1>; > + status = "okay"; > +}; > + > +&uart4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart4>; > + dtr-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; > + uart-has-rtscts; > + status = "okay"; > +}; > + > +&usbotg1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usbotg1>; > + vbus-supply = <®_vbus>; > + dr_mode = "host"; > + over-current-active-low; > + status = "okay"; > +}; > + > +&usdhc1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc1>; > + vmmc-supply = <®_3v3>; > + bus-width = <8>; > + no-1-8-v; > + non-removable; > + cap-mmc-hw-reset; > + no-sd; > + no-sdio; > + status = "okay"; > +}; > + > +&usdhc2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc2>; > + mmc-pwrseq = <&usdhc2_wifi_pwrseq>; > + bus-width = <4>; > + no-1-8-v; > + no-mmc; > + no-sd; > + non-removable; > + pm-ignore-notify; Not sure what this property is. Shawn > + #address-cells = <1>; > + #size-cells = <0>; > + status = "okay"; > + > + wifi@1 { > + compatible = "brcm,bcm4329-fmac"; > + reg = <1>; > + }; > +}; > + > +&iomuxc { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hog>; > + > + pinctrl_can1: can1grp { > + fsl,pins = < > + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b0b0 > + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b0b0 > + >; > + }; > + > + pinctrl_enet1: enet1grp { > + fsl,pins = < > + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 > + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 > + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 > + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 > + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 > + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 > + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 > + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 > + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 > + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 > + > + MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x038b0 > + MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x170b0 > + >; > + }; > + > + pinctrl_hog: hoggrp { > + fsl,pins = < > + /* HW Revision */ > + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0 > + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x1b0b0 > + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x1b0b0 > + > + /* HW ID */ > + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x1b0b0 > + MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x1b0b0 > + MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x1b0b0 > + MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x1b0b0 > + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b0b0 > + > + /* Digital inputs */ > + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x11000 > + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x11000 > + MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x11000 > + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x11000 > + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x11000 > + > + /* Isolated outputs */ > + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x01020 > + MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x01020 > + MX6UL_PAD_UART2_RTS_B__GPIO1_IO23 0x01020 > + MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x01020 > + MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x01020 > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001f8b1 > + MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001f8b1 > + >; > + }; > + > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001f8b1 > + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001f8b1 > + >; > + }; > + > + pinctrl_pwm1: pwm1grp { > + fsl,pins = < > + MX6UL_PAD_LCD_DATA00__PWM1_OUT 0x01010 > + >; > + }; > + > + pinctrl_pwm2: pwm2grp { > + fsl,pins = < > + MX6UL_PAD_LCD_DATA01__PWM2_OUT 0x01010 > + >; > + }; > + > + pinctrl_pwm3: pwm3grp { > + fsl,pins = < > + MX6UL_PAD_LCD_DATA02__PWM3_OUT 0x01010 > + >; > + }; > + > + pinctrl_pwm4: pwm4grp { > + fsl,pins = < > + MX6UL_PAD_LCD_DATA03__PWM4_OUT 0x01010 > + >; > + }; > + > + pinctrl_pwm5: pwm5grp { > + fsl,pins = < > + MX6UL_PAD_LCD_DATA18__PWM5_OUT 0x01010 > + >; > + }; > + > + pinctrl_pwm6: pwm6grp { > + fsl,pins = < > + MX6UL_PAD_LCD_DATA19__PWM6_OUT 0x01010 > + >; > + }; > + > + pinctrl_uart1: uart1grp { > + fsl,pins = < > + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 > + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 > + >; > + }; > + > + pinctrl_uart4: uart4grp { > + fsl,pins = < > + MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x1b0b0 > + MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x1b0b0 > + MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS 0x1b0b0 > + MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS 0x1b0b0 > + MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x1b0b0 > + >; > + }; > + > + pinctrl_usbotg1: usbotg1grp { > + fsl,pins = < > + MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x1b0b0 > + >; > + }; > + > + pinctrl_usdhc1: usdhc1grp { > + fsl,pins = < > + MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B 0x17099 > + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x1f099 > + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10099 > + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17099 > + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17099 > + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17099 > + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17099 > + MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17099 > + MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17099 > + MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17099 > + MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17099 > + >; > + }; > + > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x100b9 > + MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x170b9 > + MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x170b9 > + MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x170b9 > + MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x170b9 > + MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x170b9 > + >; > + }; > + > + pinctrl_vbus: vbus0grp { > + fsl,pins = < > + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x030b0 > + >; > + }; > + > + pinctrl_wifi_npd: wifigrp { > + fsl,pins = < > + /* WL_REG_ON */ > + MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x03020 > + >; > + }; > +}; > + > +&iomuxc_snvs { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_snvs_hog>; > + > + pinctrl_snvs_hog: snvs-hog-grp { > + fsl,pins = < > + /* Digital outputs */ > + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x00020 > + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x00020 > + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x00020 > + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x00020 > + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x00020 > + > + /* Digital outputs fault feedback */ > + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17000 > + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17000 > + MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x17000 > + MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x17000 > + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x17000 > + >; > + }; > +}; > -- > 2.30.2 > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v1 3/3] ARM: dts: add JOZ Access Point 2021-11-21 2:06 ` Shawn Guo @ 2021-11-22 10:14 ` Oleksij Rempel 0 siblings, 0 replies; 7+ messages in thread From: Oleksij Rempel @ 2021-11-22 10:14 UTC (permalink / raw) To: Shawn Guo Cc: devicetree, Sascha Hauer, linux-kernel, Rob Herring, NXP Linux Team, Pengutronix Kernel Team, David Jander, Fabio Estevam, linux-arm-kernel On Sun, Nov 21, 2021 at 10:06:30AM +0800, Shawn Guo wrote: > On Thu, Oct 14, 2021 at 10:33:13AM +0200, Oleksij Rempel wrote: > > JOZ Access Point is imx6ull based device designed for agricultural > > +&usdhc2 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_usdhc2>; > > + mmc-pwrseq = <&usdhc2_wifi_pwrseq>; > > + bus-width = <4>; > > + no-1-8-v; > > + no-mmc; > > + no-sd; > > + non-removable; > > + pm-ignore-notify; > > Not sure what this property is. Huh... good point. Thx! Looks like it is artifact from linux-imx... Regards, Oleksij -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v1 1/3] dt-bindings: vendor-prefixes: Add an entry for JOZ BV 2021-10-14 8:33 [PATCH v1 1/3] dt-bindings: vendor-prefixes: Add an entry for JOZ BV Oleksij Rempel 2021-10-14 8:33 ` [PATCH v1 2/3] dt-bindings: arm: fsl: add JOZ Access Point Oleksij Rempel 2021-10-14 8:33 ` [PATCH v1 3/3] ARM: dts: " Oleksij Rempel @ 2021-10-26 21:12 ` Rob Herring 2 siblings, 0 replies; 7+ messages in thread From: Rob Herring @ 2021-10-26 21:12 UTC (permalink / raw) To: Oleksij Rempel Cc: devicetree, Fabio Estevam, Rob Herring, Pengutronix Kernel Team, NXP Linux Team, David Jander, linux-kernel, linux-arm-kernel, Sascha Hauer, Shawn Guo On Thu, 14 Oct 2021 10:33:11 +0200, Oleksij Rempel wrote: > Add "joz" entry for JOZ BV: https://joz.nl/en/about-joz/ > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> > --- > Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ > 1 file changed, 2 insertions(+) > Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-11-22 10:14 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-10-14 8:33 [PATCH v1 1/3] dt-bindings: vendor-prefixes: Add an entry for JOZ BV Oleksij Rempel 2021-10-14 8:33 ` [PATCH v1 2/3] dt-bindings: arm: fsl: add JOZ Access Point Oleksij Rempel 2021-10-26 21:13 ` Rob Herring 2021-10-14 8:33 ` [PATCH v1 3/3] ARM: dts: " Oleksij Rempel 2021-11-21 2:06 ` Shawn Guo 2021-11-22 10:14 ` Oleksij Rempel 2021-10-26 21:12 ` [PATCH v1 1/3] dt-bindings: vendor-prefixes: Add an entry for JOZ BV Rob Herring
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).