[PATCH v2] ARM: dts: spear13xx: Drop malformed 'interrupt-map' on PCI nodes

[PATCH v2] ARM: dts: spear13xx: Drop malformed 'interrupt-map' on PCI nodes

[Rob Herring]

The spear13xx PCI 'interrupt-map' property is not parse-able.
'#interrupt-cells' is missing and there are 3 #address-cells. Based on the
driver, the only supported interrupt is for MSI. Therefore, 'interrupt-map'
is not needed.

Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
---

Arnd, Olof, Please apply.

 arch/arm/boot/dts/spear1310.dtsi | 6 ------
 arch/arm/boot/dts/spear1340.dtsi | 2 --
 2 files changed, 8 deletions(-)

diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
index c4b49baf9804..2f746a9428a7 100644
--- a/arch/arm/boot/dts/spear1310.dtsi
+++ b/arch/arm/boot/dts/spear1310.dtsi
@@ -82,8 +82,6 @@ pcie0: pcie@b1000000 {
 			reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
 			reg-names = "dbi", "config";
 			interrupts = <0 68 0x4>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0x0 0 &gic 0 68 0x4>;
 			num-lanes = <1>;
 			phys = <&miphy0 1>;
 			phy-names = "pcie-phy";
@@ -101,8 +99,6 @@ pcie1: pcie@b1800000 {
 			reg = <0xb1800000 0x4000>, <0x90000000 0x20000>;
 			reg-names = "dbi", "config";
 			interrupts = <0 69 0x4>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0x0 0 &gic 0 69 0x4>;
 			num-lanes = <1>;
 			phys = <&miphy1 1>;
 			phy-names = "pcie-phy";
@@ -120,8 +116,6 @@ pcie2: pcie@b4000000 {
 			reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>;
 			reg-names = "dbi", "config";
 			interrupts = <0 70 0x4>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0x0 0 &gic 0 70 0x4>;
 			num-lanes = <1>;
 			phys = <&miphy2 1>;
 			phy-names = "pcie-phy";
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
index 1a8f5e8b10e3..827e887afbda 100644
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -47,8 +47,6 @@ pcie0: pcie@b1000000 {
 			reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
 			reg-names = "dbi", "config";
 			interrupts = <0 68 0x4>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0x0 0 &gic 0 68 0x4>;
 			num-lanes = <1>;
 			phys = <&miphy0 1>;
 			phy-names = "pcie-phy";
-- 
2.32.0