linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Johan Hovold <johan@kernel.org>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-mmc@vger.kernel.org, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org, Johan Hovold <johan@kernel.org>,
	stable@vger.kernel.org
Subject: [PATCH] mmc: vub300: fix control-message timeouts
Date: Mon, 25 Oct 2021 13:56:08 +0200	[thread overview]
Message-ID: <20211025115608.5287-1-johan@kernel.org> (raw)

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Cc: stable@vger.kernel.org      # 3.0
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/mmc/host/vub300.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c
index 4950d10d3a19..97beece62fec 100644
--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -576,7 +576,7 @@ static void check_vub300_port_status(struct vub300_mmc_host *vub300)
 				GET_SYSTEM_PORT_STATUS,
 				USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 				0x0000, 0x0000, &vub300->system_port_status,
-				sizeof(vub300->system_port_status), HZ);
+				sizeof(vub300->system_port_status), 1000);
 	if (sizeof(vub300->system_port_status) == retval)
 		new_system_port_status(vub300);
 }
@@ -1241,7 +1241,7 @@ static void __download_offload_pseudocode(struct vub300_mmc_host *vub300,
 						SET_INTERRUPT_PSEUDOCODE,
 						USB_DIR_OUT | USB_TYPE_VENDOR |
 						USB_RECIP_DEVICE, 0x0000, 0x0000,
-						xfer_buffer, xfer_length, HZ);
+						xfer_buffer, xfer_length, 1000);
 			kfree(xfer_buffer);
 			if (retval < 0)
 				goto copy_error_message;
@@ -1284,7 +1284,7 @@ static void __download_offload_pseudocode(struct vub300_mmc_host *vub300,
 						SET_TRANSFER_PSEUDOCODE,
 						USB_DIR_OUT | USB_TYPE_VENDOR |
 						USB_RECIP_DEVICE, 0x0000, 0x0000,
-						xfer_buffer, xfer_length, HZ);
+						xfer_buffer, xfer_length, 1000);
 			kfree(xfer_buffer);
 			if (retval < 0)
 				goto copy_error_message;
@@ -1991,7 +1991,7 @@ static void __set_clock_speed(struct vub300_mmc_host *vub300, u8 buf[8],
 		usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
 				SET_CLOCK_SPEED,
 				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				0x00, 0x00, buf, buf_array_size, HZ);
+				0x00, 0x00, buf, buf_array_size, 1000);
 	if (retval != 8) {
 		dev_err(&vub300->udev->dev, "SET_CLOCK_SPEED"
 			" %dkHz failed with retval=%d\n", kHzClock, retval);
@@ -2013,14 +2013,14 @@ static void vub300_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
 				SET_SD_POWER,
 				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				0x0000, 0x0000, NULL, 0, HZ);
+				0x0000, 0x0000, NULL, 0, 1000);
 		/* must wait for the VUB300 u-proc to boot up */
 		msleep(600);
 	} else if ((ios->power_mode == MMC_POWER_UP) && !vub300->card_powered) {
 		usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
 				SET_SD_POWER,
 				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				0x0001, 0x0000, NULL, 0, HZ);
+				0x0001, 0x0000, NULL, 0, 1000);
 		msleep(600);
 		vub300->card_powered = 1;
 	} else if (ios->power_mode == MMC_POWER_ON) {
@@ -2275,14 +2275,14 @@ static int vub300_probe(struct usb_interface *interface,
 				GET_HC_INF0,
 				USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 				0x0000, 0x0000, &vub300->hc_info,
-				sizeof(vub300->hc_info), HZ);
+				sizeof(vub300->hc_info), 1000);
 	if (retval < 0)
 		goto error5;
 	retval =
 		usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
 				SET_ROM_WAIT_STATES,
 				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				firmware_rom_wait_states, 0x0000, NULL, 0, HZ);
+				firmware_rom_wait_states, 0x0000, NULL, 0, 1000);
 	if (retval < 0)
 		goto error5;
 	dev_info(&vub300->udev->dev,
@@ -2297,7 +2297,7 @@ static int vub300_probe(struct usb_interface *interface,
 				GET_SYSTEM_PORT_STATUS,
 				USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 				0x0000, 0x0000, &vub300->system_port_status,
-				sizeof(vub300->system_port_status), HZ);
+				sizeof(vub300->system_port_status), 1000);
 	if (retval < 0) {
 		goto error4;
 	} else if (sizeof(vub300->system_port_status) == retval) {
-- 
2.32.0


             reply	other threads:[~2021-10-25 11:56 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-25 11:56 Johan Hovold [this message]
2021-10-26 15:40 ` [PATCH] mmc: vub300: fix control-message timeouts Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211025115608.5287-1-johan@kernel.org \
    --to=johan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).