From: Johan Hovold <johan@kernel.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: Herton Ronaldo Krzesinski <herton@canonical.com>,
Hin-Tak Leung <htl10@users.sourceforge.net>,
Larry Finger <Larry.Finger@lwfinger.net>,
Amitkumar Karwar <amitkarwar@gmail.com>,
Siva Rebbagondla <siva8118@gmail.com>,
linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Johan Hovold <johan@kernel.org>,
stable@vger.kernel.org
Subject: [PATCH 3/4] rtl8187: fix control-message timeouts
Date: Mon, 25 Oct 2021 14:05:21 +0200 [thread overview]
Message-ID: <20211025120522.6045-4-johan@kernel.org> (raw)
In-Reply-To: <20211025120522.6045-1-johan@kernel.org>
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 605bebe23bf6 ("[PATCH] Add rtl8187 wireless driver")
Cc: stable@vger.kernel.org # 2.6.23
Signed-off-by: Johan Hovold <johan@kernel.org>
---
.../net/wireless/realtek/rtl818x/rtl8187/rtl8225.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c b/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c
index 585784258c66..4efab907a3ac 100644
--- a/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c
@@ -28,7 +28,7 @@ u8 rtl818x_ioread8_idx(struct rtl8187_priv *priv,
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
(unsigned long)addr, idx & 0x03,
- &priv->io_dmabuf->bits8, sizeof(val), HZ / 2);
+ &priv->io_dmabuf->bits8, sizeof(val), 500);
val = priv->io_dmabuf->bits8;
mutex_unlock(&priv->io_mutex);
@@ -45,7 +45,7 @@ u16 rtl818x_ioread16_idx(struct rtl8187_priv *priv,
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
(unsigned long)addr, idx & 0x03,
- &priv->io_dmabuf->bits16, sizeof(val), HZ / 2);
+ &priv->io_dmabuf->bits16, sizeof(val), 500);
val = priv->io_dmabuf->bits16;
mutex_unlock(&priv->io_mutex);
@@ -62,7 +62,7 @@ u32 rtl818x_ioread32_idx(struct rtl8187_priv *priv,
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
(unsigned long)addr, idx & 0x03,
- &priv->io_dmabuf->bits32, sizeof(val), HZ / 2);
+ &priv->io_dmabuf->bits32, sizeof(val), 500);
val = priv->io_dmabuf->bits32;
mutex_unlock(&priv->io_mutex);
@@ -79,7 +79,7 @@ void rtl818x_iowrite8_idx(struct rtl8187_priv *priv,
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
(unsigned long)addr, idx & 0x03,
- &priv->io_dmabuf->bits8, sizeof(val), HZ / 2);
+ &priv->io_dmabuf->bits8, sizeof(val), 500);
mutex_unlock(&priv->io_mutex);
}
@@ -93,7 +93,7 @@ void rtl818x_iowrite16_idx(struct rtl8187_priv *priv,
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
(unsigned long)addr, idx & 0x03,
- &priv->io_dmabuf->bits16, sizeof(val), HZ / 2);
+ &priv->io_dmabuf->bits16, sizeof(val), 500);
mutex_unlock(&priv->io_mutex);
}
@@ -107,7 +107,7 @@ void rtl818x_iowrite32_idx(struct rtl8187_priv *priv,
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
(unsigned long)addr, idx & 0x03,
- &priv->io_dmabuf->bits32, sizeof(val), HZ / 2);
+ &priv->io_dmabuf->bits32, sizeof(val), 500);
mutex_unlock(&priv->io_mutex);
}
@@ -183,7 +183,7 @@ static void rtl8225_write_8051(struct ieee80211_hw *dev, u8 addr, __le16 data)
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
addr, 0x8225, &priv->io_dmabuf->bits16, sizeof(data),
- HZ / 2);
+ 500);
mutex_unlock(&priv->io_mutex);
--
2.32.0
next prev parent reply other threads:[~2021-10-25 12:06 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-25 12:05 [PATCH 0/4] wireless: fix control-message timeouts Johan Hovold
2021-10-25 12:05 ` [PATCH 1/4] ath10k: fix control-message timeout Johan Hovold
2021-10-28 7:33 ` Kalle Valo
2021-10-25 12:05 ` [PATCH 2/4] ath6kl: " Johan Hovold
2021-10-25 12:05 ` Johan Hovold [this message]
2021-10-28 13:26 ` [PATCH 3/4] rtl8187: fix control-message timeouts Kalle Valo
2021-10-25 12:05 ` [PATCH 4/4] rsi: fix control-message timeout Johan Hovold
[not found] <1202359771.1685642.1635189110010.ref@mail.yahoo.com>
2021-10-25 19:11 ` [PATCH 3/4] rtl8187: fix control-message timeouts Hin-Tak Leung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211025120522.6045-4-johan@kernel.org \
--to=johan@kernel.org \
--cc=Larry.Finger@lwfinger.net \
--cc=amitkarwar@gmail.com \
--cc=herton@canonical.com \
--cc=htl10@users.sourceforge.net \
--cc=kvalo@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=siva8118@gmail.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).