linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Johan Hovold <johan@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Larry Finger <Larry.Finger@lwfinger.net>,
	Florian Schilhabel <florian.c.schilhabel@googlemail.com>,
	linux-staging@lists.linux.dev, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org, Johan Hovold <johan@kernel.org>,
	stable@vger.kernel.org
Subject: [PATCH 1/2] staging: rtl8192u: fix control-message timeouts
Date: Mon, 25 Oct 2021 14:09:09 +0200	[thread overview]
Message-ID: <20211025120910.6339-2-johan@kernel.org> (raw)
In-Reply-To: <20211025120910.6339-1-johan@kernel.org>

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging")
Cc: stable@vger.kernel.org      # 2.6.33
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/staging/rtl8192u/r8192U_core.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index b6698656fc01..cf5cfee2936f 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -229,7 +229,7 @@ int write_nic_byte_E(struct net_device *dev, int indx, u8 data)
 
 	status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
-				 indx | 0xfe00, 0, usbdata, 1, HZ / 2);
+				 indx | 0xfe00, 0, usbdata, 1, 500);
 	kfree(usbdata);
 
 	if (status < 0) {
@@ -251,7 +251,7 @@ int read_nic_byte_E(struct net_device *dev, int indx, u8 *data)
 
 	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
-				 indx | 0xfe00, 0, usbdata, 1, HZ / 2);
+				 indx | 0xfe00, 0, usbdata, 1, 500);
 	*data = *usbdata;
 	kfree(usbdata);
 
@@ -279,7 +279,7 @@ int write_nic_byte(struct net_device *dev, int indx, u8 data)
 	status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 1, HZ / 2);
+				 usbdata, 1, 500);
 	kfree(usbdata);
 
 	if (status < 0) {
@@ -305,7 +305,7 @@ int write_nic_word(struct net_device *dev, int indx, u16 data)
 	status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 2, HZ / 2);
+				 usbdata, 2, 500);
 	kfree(usbdata);
 
 	if (status < 0) {
@@ -331,7 +331,7 @@ int write_nic_dword(struct net_device *dev, int indx, u32 data)
 	status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 4, HZ / 2);
+				 usbdata, 4, 500);
 	kfree(usbdata);
 
 	if (status < 0) {
@@ -355,7 +355,7 @@ int read_nic_byte(struct net_device *dev, int indx, u8 *data)
 	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 1, HZ / 2);
+				 usbdata, 1, 500);
 	*data = *usbdata;
 	kfree(usbdata);
 
@@ -380,7 +380,7 @@ int read_nic_word(struct net_device *dev, int indx, u16 *data)
 	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 2, HZ / 2);
+				 usbdata, 2, 500);
 	*data = *usbdata;
 	kfree(usbdata);
 
@@ -404,7 +404,7 @@ static int read_nic_word_E(struct net_device *dev, int indx, u16 *data)
 
 	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
-				 indx | 0xfe00, 0, usbdata, 2, HZ / 2);
+				 indx | 0xfe00, 0, usbdata, 2, 500);
 	*data = *usbdata;
 	kfree(usbdata);
 
@@ -430,7 +430,7 @@ int read_nic_dword(struct net_device *dev, int indx, u32 *data)
 	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 4, HZ / 2);
+				 usbdata, 4, 500);
 	*data = *usbdata;
 	kfree(usbdata);
 
-- 
2.32.0


  reply	other threads:[~2021-10-25 12:09 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-25 12:09 [PATCH 0/2] staging: fix control-message timeouts Johan Hovold
2021-10-25 12:09 ` Johan Hovold [this message]
2021-10-25 15:06   ` [PATCH 1/2] staging: rtl8192u: " Larry Finger
2021-10-25 15:41     ` Joe Perches
2021-10-25 15:51       ` Greg Kroah-Hartman
2021-10-25 16:20         ` Joe Perches
2021-10-25 12:09 ` [PATCH 2/2] staging: r8712u: fix control-message timeout Johan Hovold
2021-10-25 15:08   ` Larry Finger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211025120910.6339-2-johan@kernel.org \
    --to=johan@kernel.org \
    --cc=Larry.Finger@lwfinger.net \
    --cc=florian.c.schilhabel@googlemail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=linux-usb@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).