[PATCH 5.10 00/95] 5.10.76-rc1 review

[PATCH 5.10 00/95] 5.10.76-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.10.76 release.
There are 95 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 27 Oct 2021 19:07:44 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.76-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.10.76-rc1

Fabien Dessenne <fabien.dessenne@foss.st.com>
    pinctrl: stm32: use valid pin identifier in stm32_pinctrl_resume()

Nick Desaulniers <ndesaulniers@google.com>
    ARM: 9122/1: select HAVE_FUTEX_CMPXCHG

Lorenz Bauer <lmb@cloudflare.com>
    selftests: bpf: fix backported ASSERT_FALSE

Sasha Neftin <sasha.neftin@intel.com>
    e1000e: Separate TGP board type from SPT

Steven Rostedt (VMware) <rostedt@goodmis.org>
    tracing: Have all levels of checks prevent recursion

Yanfei Xu <yanfei.xu@windriver.com>
    net: mdiobus: Fix memory leak in __mdiobus_register

Oliver Neukum <oneukum@suse.com>
    usbnet: sanity check for maxpacket

Daniel Borkmann <daniel@iogearbox.net>
    bpf, test, cgroup: Use sk_{alloc,free} for test cases

Niklas Schnelle <schnelle@linux.ibm.com>
    s390/pci: fix zpci_zdev_put() on reserve

Ziyang Xuan <william.xuanziyang@huawei.com>
    can: isotp: isotp_sendmsg(): fix TX buffer concurrent access in isotp_sendmsg()

Dexuan Cui <decui@microsoft.com>
    scsi: core: Fix shost->cmd_per_lun calculation in scsi_add_host_with_dma()

Yunsheng Lin <linyunsheng@huawei.com>
    net: hns3: fix for miscalculation of rx unused desc

Woody Lin <woodylin@google.com>
    sched/scs: Reset the shadow stack when idle_task_exit

Joy Gu <jgu@purestorage.com>
    scsi: qla2xxx: Fix a memory leak in an error path of qla2x00_process_els()

Mike Christie <michael.christie@oracle.com>
    scsi: iscsi: Fix set_param() handling

Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    Input: snvs_pwrkey - add clk handling

Kan Liang <kan.liang@linux.intel.com>
    perf/x86/msr: Add Sapphire Rapids CPU support

Shunsuke Nakamura <nakamura.shun@fujitsu.com>
    libperf tests: Fix test_stat_cpu

Kai Vehmanen <kai.vehmanen@linux.intel.com>
    ALSA: hda: avoid write to STATESTS if controller is in reset

Prashant Malani <pmalani@chromium.org>
    platform/x86: intel_scu_ipc: Update timeout value in comment

Zheyu Ma <zheyuma97@gmail.com>
    isdn: mISDN: Fix sleeping function called from invalid context

Herve Codina <herve.codina@bootlin.com>
    ARM: dts: spear3xx: Fix gmac node

Herve Codina <herve.codina@bootlin.com>
    net: stmmac: add support for dwmac 3.40a

Filipe Manana <fdmanana@suse.com>
    btrfs: deal with errors when checking if a dir entry exists during log replay

Takashi Iwai <tiwai@suse.de>
    ALSA: hda: intel: Allow repeatedly probing on codec configuration errors

Brendan Higgins <brendanhiggins@google.com>
    gcc-plugins/structleak: add makefile var for disabling structleak

Yunsheng Lin <linyunsheng@huawei.com>
    net: hns3: fix the max tx size according to user manual

Marek Vasut <marex@denx.de>
    drm: mxsfb: Fix NULL pointer dereference crash on unload

Nikolay Aleksandrov <nikolay@nvidia.com>
    net: bridge: mcast: use multicast_membership_interval for IGMPv3

Florian Westphal <fw@strlen.de>
    selftests: netfilter: remove stray bash debug line

Vegard Nossum <vegard.nossum@gmail.com>
    netfilter: Kconfig: use 'default y' instead of 'm' for bool config option

Xiaolong Huang <butterflyhuangxx@gmail.com>
    isdn: cpai: check ctr->cnr to avoid array index out of bound

Lin Ma <linma@zju.edu.cn>
    nfc: nci: fix the UAF of rf_conn_info object

Paolo Bonzini <pbonzini@redhat.com>
    KVM: nVMX: promptly process interrupts delivered while in guest mode

Miaohe Lin <linmiaohe@huawei.com>
    mm, slub: fix incorrect memcg slab count for bulk free

Miaohe Lin <linmiaohe@huawei.com>
    mm, slub: fix potential memoryleak in kmem_cache_open()

Miaohe Lin <linmiaohe@huawei.com>
    mm, slub: fix mismatch between reconstructed freelist depth and cnt

Michael Ellerman <mpe@ellerman.id.au>
    powerpc/idle: Don't corrupt back chain when going idle

Michael Ellerman <mpe@ellerman.id.au>
    KVM: PPC: Book3S HV: Make idle_kvm_start_guest() return 0 if it went to guest

Michael Ellerman <mpe@ellerman.id.au>
    KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest()

Christopher M. Riedl <cmr@codefail.de>
    powerpc64/idle: Fix SP offsets when saving GPRs

DENG Qingfang <dqfext@gmail.com>
    net: dsa: mt7530: correct ds->num_ports

Gaosheng Cui <cuigaosheng1@huawei.com>
    audit: fix possible null-pointer dereference in audit_filter_rules

Takashi Iwai <tiwai@suse.de>
    ASoC: DAPM: Fix missing kctl change notifications

Steven Clarkson <sc@lambdal.com>
    ALSA: hda/realtek: Add quirk for Clevo PC50HS

Brendan Grieve <brendan@grieve.com.au>
    ALSA: usb-audio: Provide quirk for Sennheiser GSP670 Headset

Matthew Wilcox (Oracle) <willy@infradead.org>
    vfs: check fd has read access in kernel_read_file_from_fd()

Lukas Bulwahn <lukas.bulwahn@gmail.com>
    elfcore: correct reference to CONFIG_UML

Nadav Amit <namit@vmware.com>
    userfaultfd: fix a race between writeprotect and exit_mmap()

Valentin Vidic <vvidic@valentin-vidic.from.hr>
    ocfs2: mount fails with buffer overflow in strlen

Jan Kara <jack@suse.cz>
    ocfs2: fix data corruption after conversion from inline format

Jeff Layton <jlayton@kernel.org>
    ceph: fix handling of "meta" errors

Jeff Layton <jlayton@kernel.org>
    ceph: skip existing superblocks that are blocklisted or shut down when mounting

Zhang Changzhong <zhangchangzhong@huawei.com>
    can: j1939: j1939_xtp_rx_rts_session_new(): abort TP less than 9 bytes

Zhang Changzhong <zhangchangzhong@huawei.com>
    can: j1939: j1939_xtp_rx_dat_one(): cancel session if receive TP.DT with error length

Ziyang Xuan <william.xuanziyang@huawei.com>
    can: j1939: j1939_netdev_start(): fix UAF for rx_kref of j1939_priv

Ziyang Xuan <william.xuanziyang@huawei.com>
    can: j1939: j1939_tp_rxtimer(): fix errant alert in j1939_tp_rxtimer

Ziyang Xuan <william.xuanziyang@huawei.com>
    can: isotp: isotp_sendmsg(): add result check for wait_event_interruptible()

Marc Kleine-Budde <mkl@pengutronix.de>
    can: isotp: isotp_sendmsg(): fix return error on FC timeout on TX path

Zheyu Ma <zheyuma97@gmail.com>
    can: peak_pci: peak_pci_remove(): fix UAF

Stephane Grosjean <s.grosjean@peak-system.com>
    can: peak_usb: pcan_usb_fd_decode_status(): fix back to ERROR_ACTIVE state notification

Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
    can: rcar_can: fix suspend/resume

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: enetc: fix ethtool counter name for PM0_TERR

Dan Johansen <strit@manjaro.org>
    drm/panel: ilitek-ili9881c: Fix sync for Feixin K101-IM2BYL02 panel

Tony Nguyen <anthony.l.nguyen@intel.com>
    ice: Add missing E810 device ids

Sasha Neftin <sasha.neftin@intel.com>
    e1000e: Fix packet loss on Tiger Lake and later

Kurt Kanzenbach <kurt@linutronix.de>
    net: stmmac: Fix E2E delay mechanism

Peng Li <lipeng321@huawei.com>
    net: hns3: disable sriov before unload hclge layer

Yufeng Mo <moyufeng@huawei.com>
    net: hns3: fix vf reset workqueue cannot exit

Yunsheng Lin <linyunsheng@huawei.com>
    net: hns3: schedule the polling again when allocation fails

Guangbin Huang <huangguangbin2@huawei.com>
    net: hns3: add limit ets dwrr bandwidth cannot be 0

Guangbin Huang <huangguangbin2@huawei.com>
    net: hns3: reset DWRR of unused tc to zero

Nathan Lynch <nathanl@linux.ibm.com>
    powerpc/smp: do not decrement idle task preempt count in CPU offline

Randy Dunlap <rdunlap@infradead.org>
    NIOS2: irqflags: rename a redefined register name

Aleksander Jan Bajkowski <olek2@wp.pl>
    net: dsa: lantiq_gswip: fix register definition

Stephen Suryaputra <ssuryaextr@gmail.com>
    ipv6: When forwarding count rx stats on the orig netdev

Leonard Crestez <cdleonard@gmail.com>
    tcp: md5: Fix overlap between vrf and non-vrf keys

Vegard Nossum <vegard.nossum@oracle.com>
    lan78xx: select CRC32

Antoine Tenart <atenart@kernel.org>
    netfilter: ipvs: make global sysctl readonly in non-init netns

Xin Long <lucien.xin@gmail.com>
    netfilter: ip6t_rt: fix rt0_hdr parsing in rt_mt6

Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
    ice: fix getting UDP tunnel entry

Shengjiu Wang <shengjiu.wang@nxp.com>
    ASoC: wm8960: Fix clock configuration on slave mode

Gerald Schaefer <gerald.schaefer@linux.ibm.com>
    dma-debug: fix sg checks in debug_dma_map_sg()

Juhee Kang <claudiajkang@gmail.com>
    netfilter: xt_IDLETIMER: fix panic that occurs when timer_type has garbage value

Benjamin Coddington <bcodding@redhat.com>
    NFSD: Keep existing listeners on portlist error

Guenter Roeck <linux@roeck-us.net>
    xtensa: xtfpga: Try software restart before simulating CPU reset

Max Filippov <jcmvbkbc@gmail.com>
    xtensa: xtfpga: use CONFIG_USE_OF instead of CONFIG_OF

Alex Deucher <alexander.deucher@amd.com>
    drm/amdgpu/display: fix dependencies for DRM_AMD_DC_SI

Jan Beulich <jbeulich@suse.com>
    xen/x86: prevent PVH type from getting clobbered

Johannes Thumshirn <johannes.thumshirn@wdc.com>
    block: decode QUEUE_FLAG_HCTX_ACTIVE in debugfs output

Eugen Hristev <eugen.hristev@microchip.com>
    ARM: dts: at91: sama5d2_som1_ek: disable ISC node by default

Rob Herring <robh@kernel.org>
    arm: dts: vexpress-v2p-ca9: Fix the SMB unit-address

Kamal Mostafa <kamal@canonical.com>
    io_uring: fix splice_fd_in checks backport typo

Jonathan Bell <jonathan@raspberrypi.org>
    xhci: add quirk for host controllers that don't update endpoint DCS

Helge Deller <deller@gmx.de>
    parisc: math-emu: Fix fall-through warnings


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm/Kconfig                                   |   1 +
 arch/arm/boot/dts/at91-sama5d27_som1_ek.dts        |   1 -
 arch/arm/boot/dts/spear3xx.dtsi                    |   2 +-
 arch/arm/boot/dts/vexpress-v2m.dtsi                |   2 +-
 arch/arm/boot/dts/vexpress-v2p-ca9.dts             |   2 +-
 arch/nios2/include/asm/irqflags.h                  |   4 +-
 arch/nios2/include/asm/registers.h                 |   2 +-
 arch/parisc/math-emu/fpudispatch.c                 |  56 ++++++-
 arch/powerpc/kernel/idle_book3s.S                  | 148 +++++++++---------
 arch/powerpc/kernel/smp.c                          |   2 -
 arch/powerpc/kvm/book3s_hv_rmhandlers.S            |  28 ++--
 arch/s390/include/asm/pci.h                        |   3 +
 arch/s390/pci/pci.c                                |  45 +++++-
 arch/s390/pci/pci_event.c                          |   4 +-
 arch/x86/events/msr.c                              |   1 +
 arch/x86/kvm/vmx/vmx.c                             |  17 +-
 arch/x86/xen/enlighten.c                           |   9 +-
 arch/xtensa/platforms/xtfpga/setup.c               |  12 +-
 block/blk-mq-debugfs.c                             |   1 +
 drivers/gpu/drm/amd/display/Kconfig                |   2 +
 drivers/gpu/drm/mxsfb/mxsfb_drv.c                  |   6 +-
 drivers/gpu/drm/panel/panel-ilitek-ili9881c.c      |  12 +-
 drivers/input/keyboard/snvs_pwrkey.c               |  29 ++++
 drivers/isdn/capi/kcapi.c                          |   5 +
 drivers/isdn/hardware/mISDN/netjet.c               |   2 +-
 drivers/net/can/rcar/rcar_can.c                    |  20 ++-
 drivers/net/can/sja1000/peak_pci.c                 |   9 +-
 drivers/net/can/usb/peak_usb/pcan_usb_fd.c         |   5 +-
 drivers/net/dsa/lantiq_gswip.c                     |   2 +-
 drivers/net/dsa/mt7530.c                           |   8 +-
 .../net/ethernet/freescale/enetc/enetc_ethtool.c   |   2 +-
 drivers/net/ethernet/hisilicon/hns3/hnae3.c        |  21 +++
 drivers/net/ethernet/hisilicon/hns3/hnae3.h        |   1 +
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.c    |  37 +++--
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.h    |   7 +-
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c |   9 ++
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c    |   1 +
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c  |   2 +
 .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c  |   6 +-
 drivers/net/ethernet/intel/e1000e/e1000.h          |   4 +-
 drivers/net/ethernet/intel/e1000e/ich8lan.c        |  31 +++-
 drivers/net/ethernet/intel/e1000e/ich8lan.h        |   3 +
 drivers/net/ethernet/intel/e1000e/netdev.c         |  29 ++--
 drivers/net/ethernet/intel/ice/ice_common.c        |   2 +
 drivers/net/ethernet/intel/ice/ice_devids.h        |   4 +
 drivers/net/ethernet/intel/ice/ice_flex_pipe.c     |   4 +-
 drivers/net/ethernet/intel/ice/ice_main.c          |   2 +
 .../net/ethernet/stmicro/stmmac/dwmac-generic.c    |   1 +
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |   2 +-
 .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |   8 +
 drivers/net/phy/mdio_bus.c                         |   1 +
 drivers/net/usb/Kconfig                            |   1 +
 drivers/net/usb/usbnet.c                           |   4 +
 drivers/pci/hotplug/s390_pci_hpc.c                 |   9 +-
 drivers/pinctrl/stm32/pinctrl-stm32.c              |   4 +-
 drivers/platform/x86/intel_scu_ipc.c               |   2 +-
 drivers/scsi/hosts.c                               |   3 +-
 drivers/scsi/qla2xxx/qla_bsg.c                     |   2 +-
 drivers/scsi/scsi_transport_iscsi.c                |   2 -
 drivers/usb/host/xhci-pci.c                        |   4 +-
 drivers/usb/host/xhci-ring.c                       |  26 +++-
 drivers/usb/host/xhci.h                            |   1 +
 fs/btrfs/tree-log.c                                |  47 +++---
 fs/ceph/caps.c                                     |  12 +-
 fs/ceph/file.c                                     |   1 -
 fs/ceph/inode.c                                    |   2 -
 fs/ceph/mds_client.c                               |  17 +-
 fs/ceph/super.c                                    |  17 +-
 fs/ceph/super.h                                    |   3 -
 fs/io_uring.c                                      |   2 +-
 fs/kernel_read_file.c                              |   2 +-
 fs/nfsd/nfsctl.c                                   |   5 +-
 fs/ocfs2/alloc.c                                   |  46 ++----
 fs/ocfs2/super.c                                   |  14 +-
 fs/userfaultfd.c                                   |  12 +-
 include/linux/elfcore.h                            |   2 +-
 include/sound/hda_codec.h                          |   1 +
 kernel/auditsc.c                                   |   2 +-
 kernel/dma/debug.c                                 |  12 +-
 kernel/sched/core.c                                |   1 +
 kernel/trace/ftrace.c                              |   4 +-
 kernel/trace/trace.h                               |  61 +++-----
 kernel/trace/trace_functions.c                     |   2 +-
 mm/slub.c                                          |  17 +-
 net/bpf/test_run.c                                 |  14 +-
 net/bridge/br_private.h                            |   4 +-
 net/can/isotp.c                                    |  45 ++++--
 net/can/j1939/j1939-priv.h                         |   1 +
 net/can/j1939/main.c                               |   7 +-
 net/can/j1939/transport.c                          |  14 +-
 net/ipv4/tcp_ipv4.c                                |  19 ++-
 net/ipv6/ip6_output.c                              |   3 +-
 net/ipv6/netfilter/ip6t_rt.c                       |  48 +-----
 net/netfilter/Kconfig                              |   2 +-
 net/netfilter/ipvs/ip_vs_ctl.c                     |   5 +
 net/netfilter/xt_IDLETIMER.c                       |   2 +-
 net/nfc/nci/rsp.c                                  |   2 +
 scripts/Makefile.gcc-plugins                       |   4 +
 sound/hda/hdac_controller.c                        |   5 +-
 sound/pci/hda/hda_bind.c                           |  20 +--
 sound/pci/hda/hda_codec.c                          |   1 +
 sound/pci/hda/hda_controller.c                     |  24 ++-
 sound/pci/hda/hda_controller.h                     |   2 +-
 sound/pci/hda/hda_intel.c                          |  29 +++-
 sound/pci/hda/hda_intel.h                          |   4 +-
 sound/pci/hda/patch_realtek.c                      |   1 +
 sound/soc/codecs/wm8960.c                          |  13 +-
 sound/soc/soc-dapm.c                               |  13 +-
 sound/usb/quirks-table.h                           |  32 ++++
 tools/lib/perf/tests/test-evlist.c                 |   6 +-
 tools/lib/perf/tests/test-evsel.c                  |   6 +-
 .../testing/selftests/bpf/prog_tests/core_reloc.c  |   2 +-
 tools/testing/selftests/net/forwarding/Makefile    |   1 +
 .../net/forwarding/forwarding.config.sample        |   2 +
 .../net/forwarding/ip6_forward_instats_vrf.sh      | 172 +++++++++++++++++++++
 tools/testing/selftests/net/forwarding/lib.sh      |   8 +
 tools/testing/selftests/netfilter/nft_flowtable.sh |   1 -
 118 files changed, 994 insertions(+), 479 deletions(-)

[PATCH 5.10 01/95] parisc: math-emu: Fix fall-through warnings

[Greg Kroah-Hartman]

From: Helge Deller <deller@gmx.de>

commit 6f1fce595b78b775d7fb585c15c2dc3a6994f96e upstream.

Fix lots of fallthrough warnings, e.g.:
arch/parisc/math-emu/fpudispatch.c:323:33: warning: this statement may fall through [-Wimplicit-fallthrough=]

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/parisc/math-emu/fpudispatch.c |   56 +++++++++++++++++++++++++++++++++++--
 1 file changed, 53 insertions(+), 3 deletions(-)

--- a/arch/parisc/math-emu/fpudispatch.c
+++ b/arch/parisc/math-emu/fpudispatch.c
@@ -310,12 +310,15 @@ decode_0c(u_int ir, u_int class, u_int s
 					r1 &= ~3;
 					fpregs[t+3] = fpregs[r1+3];
 					fpregs[t+2] = fpregs[r1+2];
+					fallthrough;
 				    case 1: /* double */
 					fpregs[t+1] = fpregs[r1+1];
+					fallthrough;
 				    case 0: /* single */
 					fpregs[t] = fpregs[r1];
 					return(NOEXCEPTION);
 				}
+				BUG();
 			case 3: /* FABS */
 				switch (fmt) {
 				    case 2: /* illegal */
@@ -325,13 +328,16 @@ decode_0c(u_int ir, u_int class, u_int s
 					r1 &= ~3;
 					fpregs[t+3] = fpregs[r1+3];
 					fpregs[t+2] = fpregs[r1+2];
+					fallthrough;
 				    case 1: /* double */
 					fpregs[t+1] = fpregs[r1+1];
+					fallthrough;
 				    case 0: /* single */
 					/* copy and clear sign bit */
 					fpregs[t] = fpregs[r1] & 0x7fffffff;
 					return(NOEXCEPTION);
 				}
+				BUG();
 			case 6: /* FNEG */
 				switch (fmt) {
 				    case 2: /* illegal */
@@ -341,13 +347,16 @@ decode_0c(u_int ir, u_int class, u_int s
 					r1 &= ~3;
 					fpregs[t+3] = fpregs[r1+3];
 					fpregs[t+2] = fpregs[r1+2];
+					fallthrough;
 				    case 1: /* double */
 					fpregs[t+1] = fpregs[r1+1];
+					fallthrough;
 				    case 0: /* single */
 					/* copy and invert sign bit */
 					fpregs[t] = fpregs[r1] ^ 0x80000000;
 					return(NOEXCEPTION);
 				}
+				BUG();
 			case 7: /* FNEGABS */
 				switch (fmt) {
 				    case 2: /* illegal */
@@ -357,13 +366,16 @@ decode_0c(u_int ir, u_int class, u_int s
 					r1 &= ~3;
 					fpregs[t+3] = fpregs[r1+3];
 					fpregs[t+2] = fpregs[r1+2];
+					fallthrough;
 				    case 1: /* double */
 					fpregs[t+1] = fpregs[r1+1];
+					fallthrough;
 				    case 0: /* single */
 					/* copy and set sign bit */
 					fpregs[t] = fpregs[r1] | 0x80000000;
 					return(NOEXCEPTION);
 				}
+				BUG();
 			case 4: /* FSQRT */
 				switch (fmt) {
 				    case 0:
@@ -376,6 +388,7 @@ decode_0c(u_int ir, u_int class, u_int s
 				    case 3: /* quad not implemented */
 					return(MAJOR_0C_EXCP);
 				}
+				BUG();
 			case 5: /* FRND */
 				switch (fmt) {
 				    case 0:
@@ -389,7 +402,7 @@ decode_0c(u_int ir, u_int class, u_int s
 					return(MAJOR_0C_EXCP);
 				}
 		} /* end of switch (subop) */
-
+		BUG();
 	case 1: /* class 1 */
 		df = extru(ir,fpdfpos,2); /* get dest format */
 		if ((df & 2) || (fmt & 2)) {
@@ -419,6 +432,7 @@ decode_0c(u_int ir, u_int class, u_int s
 				    case 3: /* dbl/dbl */
 					return(MAJOR_0C_EXCP);
 				}
+				BUG();
 			case 1: /* FCNVXF */
 				switch(fmt) {
 				    case 0: /* sgl/sgl */
@@ -434,6 +448,7 @@ decode_0c(u_int ir, u_int class, u_int s
 					return(dbl_to_dbl_fcnvxf(&fpregs[r1],0,
 						&fpregs[t],status));
 				}
+				BUG();
 			case 2: /* FCNVFX */
 				switch(fmt) {
 				    case 0: /* sgl/sgl */
@@ -449,6 +464,7 @@ decode_0c(u_int ir, u_int class, u_int s
 					return(dbl_to_dbl_fcnvfx(&fpregs[r1],0,
 						&fpregs[t],status));
 				}
+				BUG();
 			case 3: /* FCNVFXT */
 				switch(fmt) {
 				    case 0: /* sgl/sgl */
@@ -464,6 +480,7 @@ decode_0c(u_int ir, u_int class, u_int s
 					return(dbl_to_dbl_fcnvfxt(&fpregs[r1],0,
 						&fpregs[t],status));
 				}
+				BUG();
 			case 5: /* FCNVUF (PA2.0 only) */
 				switch(fmt) {
 				    case 0: /* sgl/sgl */
@@ -479,6 +496,7 @@ decode_0c(u_int ir, u_int class, u_int s
 					return(dbl_to_dbl_fcnvuf(&fpregs[r1],0,
 						&fpregs[t],status));
 				}
+				BUG();
 			case 6: /* FCNVFU (PA2.0 only) */
 				switch(fmt) {
 				    case 0: /* sgl/sgl */
@@ -494,6 +512,7 @@ decode_0c(u_int ir, u_int class, u_int s
 					return(dbl_to_dbl_fcnvfu(&fpregs[r1],0,
 						&fpregs[t],status));
 				}
+				BUG();
 			case 7: /* FCNVFUT (PA2.0 only) */
 				switch(fmt) {
 				    case 0: /* sgl/sgl */
@@ -509,10 +528,11 @@ decode_0c(u_int ir, u_int class, u_int s
 					return(dbl_to_dbl_fcnvfut(&fpregs[r1],0,
 						&fpregs[t],status));
 				}
+				BUG();
 			case 4: /* undefined */
 				return(MAJOR_0C_EXCP);
 		} /* end of switch subop */
-
+		BUG();
 	case 2: /* class 2 */
 		fpu_type_flags=fpregs[FPU_TYPE_FLAG_POS];
 		r2 = extru(ir, fpr2pos, 5) * sizeof(double)/sizeof(u_int);
@@ -590,6 +610,7 @@ decode_0c(u_int ir, u_int class, u_int s
 				    case 3: /* quad not implemented */
 					return(MAJOR_0C_EXCP);
 				}
+				BUG();
 			case 1: /* FTEST */
 				switch (fmt) {
 				    case 0:
@@ -609,8 +630,10 @@ decode_0c(u_int ir, u_int class, u_int s
 				    case 3:
 					return(MAJOR_0C_EXCP);
 				}
+				BUG();
 		    } /* end of switch subop */
 		} /* end of else for PA1.0 & PA1.1 */
+		BUG();
 	case 3: /* class 3 */
 		r2 = extru(ir,fpr2pos,5) * sizeof(double)/sizeof(u_int);
 		if (r2 == 0)
@@ -633,6 +656,7 @@ decode_0c(u_int ir, u_int class, u_int s
 				    case 3: /* quad not implemented */
 					return(MAJOR_0C_EXCP);
 				}
+				BUG();
 			case 1: /* FSUB */
 				switch (fmt) {
 				    case 0:
@@ -645,6 +669,7 @@ decode_0c(u_int ir, u_int class, u_int s
 				    case 3: /* quad not implemented */
 					return(MAJOR_0C_EXCP);
 				}
+				BUG();
 			case 2: /* FMPY */
 				switch (fmt) {
 				    case 0:
@@ -657,6 +682,7 @@ decode_0c(u_int ir, u_int class, u_int s
 				    case 3: /* quad not implemented */
 					return(MAJOR_0C_EXCP);
 				}
+				BUG();
 			case 3: /* FDIV */
 				switch (fmt) {
 				    case 0:
@@ -669,6 +695,7 @@ decode_0c(u_int ir, u_int class, u_int s
 				    case 3: /* quad not implemented */
 					return(MAJOR_0C_EXCP);
 				}
+				BUG();
 			case 4: /* FREM */
 				switch (fmt) {
 				    case 0:
@@ -681,6 +708,7 @@ decode_0c(u_int ir, u_int class, u_int s
 				    case 3: /* quad not implemented */
 					return(MAJOR_0C_EXCP);
 				}
+				BUG();
 		} /* end of class 3 switch */
 	} /* end of switch(class) */
 
@@ -736,10 +764,12 @@ u_int fpregs[];
 					return(MAJOR_0E_EXCP);
 				    case 1: /* double */
 					fpregs[t+1] = fpregs[r1+1];
+					fallthrough;
 				    case 0: /* single */
 					fpregs[t] = fpregs[r1];
 					return(NOEXCEPTION);
 				}
+				BUG();
 			case 3: /* FABS */
 				switch (fmt) {
 				    case 2:
@@ -747,10 +777,12 @@ u_int fpregs[];
 					return(MAJOR_0E_EXCP);
 				    case 1: /* double */
 					fpregs[t+1] = fpregs[r1+1];
+					fallthrough;
 				    case 0: /* single */
 					fpregs[t] = fpregs[r1] & 0x7fffffff;
 					return(NOEXCEPTION);
 				}
+				BUG();
 			case 6: /* FNEG */
 				switch (fmt) {
 				    case 2:
@@ -758,10 +790,12 @@ u_int fpregs[];
 					return(MAJOR_0E_EXCP);
 				    case 1: /* double */
 					fpregs[t+1] = fpregs[r1+1];
+					fallthrough;
 				    case 0: /* single */
 					fpregs[t] = fpregs[r1] ^ 0x80000000;
 					return(NOEXCEPTION);
 				}
+				BUG();
 			case 7: /* FNEGABS */
 				switch (fmt) {
 				    case 2:
@@ -769,10 +803,12 @@ u_int fpregs[];
 					return(MAJOR_0E_EXCP);
 				    case 1: /* double */
 					fpregs[t+1] = fpregs[r1+1];
+					fallthrough;
 				    case 0: /* single */
 					fpregs[t] = fpregs[r1] | 0x80000000;
 					return(NOEXCEPTION);
 				}
+				BUG();
 			case 4: /* FSQRT */
 				switch (fmt) {
 				    case 0:
@@ -785,6 +821,7 @@ u_int fpregs[];
 				    case 3:
 					return(MAJOR_0E_EXCP);
 				}
+				BUG();
 			case 5: /* FRMD */
 				switch (fmt) {
 				    case 0:
@@ -798,7 +835,7 @@ u_int fpregs[];
 					return(MAJOR_0E_EXCP);
 				}
 		} /* end of switch (subop */
-	
+		BUG();
 	case 1: /* class 1 */
 		df = extru(ir,fpdfpos,2); /* get dest format */
 		/*
@@ -826,6 +863,7 @@ u_int fpregs[];
 				    case 3: /* dbl/dbl */
 					return(MAJOR_0E_EXCP);
 				}
+				BUG();
 			case 1: /* FCNVXF */
 				switch(fmt) {
 				    case 0: /* sgl/sgl */
@@ -841,6 +879,7 @@ u_int fpregs[];
 					return(dbl_to_dbl_fcnvxf(&fpregs[r1],0,
 						&fpregs[t],status));
 				}
+				BUG();
 			case 2: /* FCNVFX */
 				switch(fmt) {
 				    case 0: /* sgl/sgl */
@@ -856,6 +895,7 @@ u_int fpregs[];
 					return(dbl_to_dbl_fcnvfx(&fpregs[r1],0,
 						&fpregs[t],status));
 				}
+				BUG();
 			case 3: /* FCNVFXT */
 				switch(fmt) {
 				    case 0: /* sgl/sgl */
@@ -871,6 +911,7 @@ u_int fpregs[];
 					return(dbl_to_dbl_fcnvfxt(&fpregs[r1],0,
 						&fpregs[t],status));
 				}
+				BUG();
 			case 5: /* FCNVUF (PA2.0 only) */
 				switch(fmt) {
 				    case 0: /* sgl/sgl */
@@ -886,6 +927,7 @@ u_int fpregs[];
 					return(dbl_to_dbl_fcnvuf(&fpregs[r1],0,
 						&fpregs[t],status));
 				}
+				BUG();
 			case 6: /* FCNVFU (PA2.0 only) */
 				switch(fmt) {
 				    case 0: /* sgl/sgl */
@@ -901,6 +943,7 @@ u_int fpregs[];
 					return(dbl_to_dbl_fcnvfu(&fpregs[r1],0,
 						&fpregs[t],status));
 				}
+				BUG();
 			case 7: /* FCNVFUT (PA2.0 only) */
 				switch(fmt) {
 				    case 0: /* sgl/sgl */
@@ -916,9 +959,11 @@ u_int fpregs[];
 					return(dbl_to_dbl_fcnvfut(&fpregs[r1],0,
 						&fpregs[t],status));
 				}
+				BUG();
 			case 4: /* undefined */
 				return(MAJOR_0C_EXCP);
 		} /* end of switch subop */
+		BUG();
 	case 2: /* class 2 */
 		/*
 		 * Be careful out there.
@@ -994,6 +1039,7 @@ u_int fpregs[];
 				}
 		    } /* end of switch subop */
 		} /* end of else for PA1.0 & PA1.1 */
+		BUG();
 	case 3: /* class 3 */
 		/*
 		 * Be careful out there.
@@ -1026,6 +1072,7 @@ u_int fpregs[];
 					return(dbl_fadd(&fpregs[r1],&fpregs[r2],
 						&fpregs[t],status));
 				}
+				BUG();
 			case 1: /* FSUB */
 				switch (fmt) {
 				    case 0:
@@ -1035,6 +1082,7 @@ u_int fpregs[];
 					return(dbl_fsub(&fpregs[r1],&fpregs[r2],
 						&fpregs[t],status));
 				}
+				BUG();
 			case 2: /* FMPY or XMPYU */
 				/*
 				 * check for integer multiply (x bit set)
@@ -1071,6 +1119,7 @@ u_int fpregs[];
 					       &fpregs[r2],&fpregs[t],status));
 				    }
 				}
+				BUG();
 			case 3: /* FDIV */
 				switch (fmt) {
 				    case 0:
@@ -1080,6 +1129,7 @@ u_int fpregs[];
 					return(dbl_fdiv(&fpregs[r1],&fpregs[r2],
 						&fpregs[t],status));
 				}
+				BUG();
 			case 4: /* FREM */
 				switch (fmt) {
 				    case 0:

[PATCH 5.10 02/95] xhci: add quirk for host controllers that dont update endpoint DCS

[Greg Kroah-Hartman]

From: Jonathan Bell <jonathan@raspberrypi.org>

commit 5255660b208aebfdb71d574f3952cf48392f4306 upstream.

Seen on a VLI VL805 PCIe to USB controller. For non-stream endpoints
at least, if the xHC halts on a particular TRB due to an error then
the DCS field in the Out Endpoint Context maintained by the hardware
is not updated with the current cycle state.

Using the quirk XHCI_EP_CTX_BROKEN_DCS and instead fetch the DCS bit
from the TRB that the xHC stopped on.

[ bjorn: rebased to v5.14-rc2 ]

Link: https://github.com/raspberrypi/linux/issues/3060
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211008092547.3996295-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-pci.c  |    4 +++-
 drivers/usb/host/xhci-ring.c |   26 +++++++++++++++++++++++++-
 drivers/usb/host/xhci.h      |    1 +
 3 files changed, 29 insertions(+), 2 deletions(-)

--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -276,8 +276,10 @@ static void xhci_pci_quirks(struct devic
 			pdev->device == 0x3432)
 		xhci->quirks |= XHCI_BROKEN_STREAMS;
 
-	if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483)
+	if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) {
 		xhci->quirks |= XHCI_LPM_SUPPORT;
+		xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS;
+	}
 
 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
 		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI)
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -562,7 +562,10 @@ void xhci_find_new_dequeue_state(struct
 	struct xhci_virt_ep *ep = &dev->eps[ep_index];
 	struct xhci_ring *ep_ring;
 	struct xhci_segment *new_seg;
+	struct xhci_segment *halted_seg = NULL;
 	union xhci_trb *new_deq;
+	union xhci_trb *halted_trb;
+	int index = 0;
 	dma_addr_t addr;
 	u64 hw_dequeue;
 	bool cycle_found = false;
@@ -600,7 +603,28 @@ void xhci_find_new_dequeue_state(struct
 	hw_dequeue = xhci_get_hw_deq(xhci, dev, ep_index, stream_id);
 	new_seg = ep_ring->deq_seg;
 	new_deq = ep_ring->dequeue;
-	state->new_cycle_state = hw_dequeue & 0x1;
+
+	/*
+	 * Quirk: xHC write-back of the DCS field in the hardware dequeue
+	 * pointer is wrong - use the cycle state of the TRB pointed to by
+	 * the dequeue pointer.
+	 */
+	if (xhci->quirks & XHCI_EP_CTX_BROKEN_DCS &&
+	    !(ep->ep_state & EP_HAS_STREAMS))
+		halted_seg = trb_in_td(xhci, cur_td->start_seg,
+				       cur_td->first_trb, cur_td->last_trb,
+				       hw_dequeue & ~0xf, false);
+	if (halted_seg) {
+		index = ((dma_addr_t)(hw_dequeue & ~0xf) - halted_seg->dma) /
+			 sizeof(*halted_trb);
+		halted_trb = &halted_seg->trbs[index];
+		state->new_cycle_state = halted_trb->generic.field[3] & 0x1;
+		xhci_dbg(xhci, "Endpoint DCS = %d TRB index = %d cycle = %d\n",
+			 (u8)(hw_dequeue & 0x1), index,
+			 state->new_cycle_state);
+	} else {
+		state->new_cycle_state = hw_dequeue & 0x1;
+	}
 	state->stream_id = stream_id;
 
 	/*
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1884,6 +1884,7 @@ struct xhci_hcd {
 #define XHCI_DISABLE_SPARSE	BIT_ULL(38)
 #define XHCI_SG_TRB_CACHE_SIZE_QUIRK	BIT_ULL(39)
 #define XHCI_NO_SOFT_RETRY	BIT_ULL(40)
+#define XHCI_EP_CTX_BROKEN_DCS	BIT_ULL(42)
 
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;

[PATCH 5.10 03/95] io_uring: fix splice_fd_in checks backport typo

[Greg Kroah-Hartman]

From: Kamal Mostafa <kamal@canonical.com>

The linux-5.10.y backport of commit "io_uring: add ->splice_fd_in checks"
includes a typo: "|" where "||" should be. (The original upstream commit
is fine.)

Fixes: 54eb6211b979 ("io_uring: add ->splice_fd_in checks")
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org # v5.10
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/io_uring.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -5559,7 +5559,7 @@ static int io_timeout_remove_prep(struct
 		return -EINVAL;
 	if (unlikely(req->flags & (REQ_F_FIXED_FILE | REQ_F_BUFFER_SELECT)))
 		return -EINVAL;
-	if (sqe->ioprio || sqe->buf_index || sqe->len || sqe->timeout_flags |
+	if (sqe->ioprio || sqe->buf_index || sqe->len || sqe->timeout_flags ||
 	    sqe->splice_fd_in)
 		return -EINVAL;
 

[PATCH 5.10 04/95] arm: dts: vexpress-v2p-ca9: Fix the SMB unit-address

[Greg Kroah-Hartman]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 2e9edc07df2ec6f835222151fa4e536e9e54856a ]

Based on 'ranges', the 'bus@4000000' node unit-address is off by 1 '0'.

Link: https://lore.kernel.org/r/20210819184239.1192395-5-robh@kernel.org
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/vexpress-v2m.dtsi    | 2 +-
 arch/arm/boot/dts/vexpress-v2p-ca9.dts | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index 2ac41ed3a57c..659dcf4004b4 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -19,7 +19,7 @@
  */
 
 / {
-	bus@4000000 {
+	bus@40000000 {
 		motherboard {
 			model = "V2M-P1";
 			arm,hbi = <0x190>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index 4c5847955856..1317f0f58d53 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -295,7 +295,7 @@
 		};
 	};
 
-	smb: bus@4000000 {
+	smb: bus@40000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
-- 
2.33.0

[PATCH 5.10 05/95] ARM: dts: at91: sama5d2_som1_ek: disable ISC node by default

[Greg Kroah-Hartman]

From: Eugen Hristev <eugen.hristev@microchip.com>

[ Upstream commit 4348cc10da6377a86940beb20ad357933b8f91bb ]

Without a sensor node, the ISC will simply fail to probe, as the
corresponding port node is missing.
It is then logical to disable the node in the devicetree.
If we add a port with a connection to a sensor endpoint, ISC can be enabled.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210902121358.503589-1-eugen.hristev@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index 9a18453d7842..0a53f21a8903 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -71,7 +71,6 @@
 			isc: isc@f0008000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
-				status = "okay";
 			};
 
 			qspi1: spi@f0024000 {
-- 
2.33.0

[PATCH 5.10 06/95] block: decode QUEUE_FLAG_HCTX_ACTIVE in debugfs output

[Greg Kroah-Hartman]

From: Johannes Thumshirn <johannes.thumshirn@wdc.com>

[ Upstream commit 1dbdd99b511c966be9147ad72991a2856ac76f22 ]

While debugging an issue we've found that $DEBUGFS/block/$disk/state
doesn't decode QUEUE_FLAG_HCTX_ACTIVE but only displays its numerical
value.

Add QUEUE_FLAG(HCTX_ACTIVE) to the blk_queue_flag_name array so it'll get
decoded properly.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/4351076388918075bd80ef07756f9d2ce63be12c.1633332053.git.johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-mq-debugfs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/block/blk-mq-debugfs.c b/block/blk-mq-debugfs.c
index 4de03da9a624..b5f26082b959 100644
--- a/block/blk-mq-debugfs.c
+++ b/block/blk-mq-debugfs.c
@@ -129,6 +129,7 @@ static const char *const blk_queue_flag_name[] = {
 	QUEUE_FLAG_NAME(PCI_P2PDMA),
 	QUEUE_FLAG_NAME(ZONE_RESETALL),
 	QUEUE_FLAG_NAME(RQ_ALLOC_TIME),
+	QUEUE_FLAG_NAME(HCTX_ACTIVE),
 	QUEUE_FLAG_NAME(NOWAIT),
 };
 #undef QUEUE_FLAG_NAME
-- 
2.33.0

[PATCH 5.10 07/95] xen/x86: prevent PVH type from getting clobbered

[Greg Kroah-Hartman]

From: Jan Beulich <jbeulich@suse.com>

[ Upstream commit 9172b5c4a778da1f855b2e3780b1afabb3cfd523 ]

Like xen_start_flags, xen_domain_type gets set before .bss gets cleared.
Hence this variable also needs to be prevented from getting put in .bss,
which is possible because XEN_NATIVE is an enumerator evaluating to
zero. Any use prior to init_hvm_pv_info() setting the variable again
would lead to wrong decisions; one such case is xenboot_console_setup()
when called as a result of "earlyprintk=xen".

Use __ro_after_init as more applicable than either __section(".data") or
__read_mostly.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>

Link: https://lore.kernel.org/r/d301677b-6f22-5ae6-bd36-458e1f323d0b@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/xen/enlighten.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index aa9f50fccc5d..0f68c6da7382 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -51,9 +51,6 @@ DEFINE_PER_CPU(struct vcpu_info, xen_vcpu_info);
 DEFINE_PER_CPU(uint32_t, xen_vcpu_id);
 EXPORT_PER_CPU_SYMBOL(xen_vcpu_id);
 
-enum xen_domain_type xen_domain_type = XEN_NATIVE;
-EXPORT_SYMBOL_GPL(xen_domain_type);
-
 unsigned long *machine_to_phys_mapping = (void *)MACH2PHYS_VIRT_START;
 EXPORT_SYMBOL(machine_to_phys_mapping);
 unsigned long  machine_to_phys_nr;
@@ -68,9 +65,11 @@ __read_mostly int xen_have_vector_callback;
 EXPORT_SYMBOL_GPL(xen_have_vector_callback);
 
 /*
- * NB: needs to live in .data because it's used by xen_prepare_pvh which runs
- * before clearing the bss.
+ * NB: These need to live in .data or alike because they're used by
+ * xen_prepare_pvh() which runs before clearing the bss.
  */
+enum xen_domain_type __ro_after_init xen_domain_type = XEN_NATIVE;
+EXPORT_SYMBOL_GPL(xen_domain_type);
 uint32_t xen_start_flags __section(".data") = 0;
 EXPORT_SYMBOL(xen_start_flags);
 
-- 
2.33.0

[PATCH 5.10 08/95] drm/amdgpu/display: fix dependencies for DRM_AMD_DC_SI

[Greg Kroah-Hartman]

From: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit 4702b34d1de9582df9dfa0e583ea28fff7de29df ]

Depends on DRM_AMDGPU_SI and DRM_AMD_DC

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/Kconfig b/drivers/gpu/drm/amd/display/Kconfig
index 3c410d236c49..f3274eb6b341 100644
--- a/drivers/gpu/drm/amd/display/Kconfig
+++ b/drivers/gpu/drm/amd/display/Kconfig
@@ -33,6 +33,8 @@ config DRM_AMD_DC_HDCP
 
 config DRM_AMD_DC_SI
 	bool "AMD DC support for Southern Islands ASICs"
+	depends on DRM_AMDGPU_SI
+	depends on DRM_AMD_DC
 	default n
 	help
 	  Choose this option to enable new AMD DC support for SI asics
-- 
2.33.0

[PATCH 5.10 09/95] xtensa: xtfpga: use CONFIG_USE_OF instead of CONFIG_OF

[Greg Kroah-Hartman]

From: Max Filippov <jcmvbkbc@gmail.com>

[ Upstream commit f3d7c2cdf6dc0d5402ec29c3673893b3542c5ad1 ]

Use platform data to initialize xtfpga device drivers when CONFIG_USE_OF
is not selected. This fixes xtfpga networking when CONFIG_USE_OF is not
selected but CONFIG_OF is.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/xtensa/platforms/xtfpga/setup.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c
index 4f7d6142d41f..59b7f11f2a3e 100644
--- a/arch/xtensa/platforms/xtfpga/setup.c
+++ b/arch/xtensa/platforms/xtfpga/setup.c
@@ -66,7 +66,7 @@ void __init platform_calibrate_ccount(void)
 
 #endif
 
-#ifdef CONFIG_OF
+#ifdef CONFIG_USE_OF
 
 static void __init xtfpga_clk_setup(struct device_node *np)
 {
@@ -284,4 +284,4 @@ static int __init xtavnet_init(void)
  */
 arch_initcall(xtavnet_init);
 
-#endif /* CONFIG_OF */
+#endif /* CONFIG_USE_OF */
-- 
2.33.0

[PATCH 5.10 10/95] xtensa: xtfpga: Try software restart before simulating CPU reset

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit 012e974501a270d8dfd4ee2039e1fdf7579c907e ]

Rebooting xtensa images loaded with the '-kernel' option in qemu does
not work. When executing a reboot command, the qemu session either hangs
or experiences an endless sequence of error messages.

  Kernel panic - not syncing: Unrecoverable error in exception handler

Reset code jumps to the CPU restart address, but Linux can not recover
from there because code and data in the kernel init sections have been
discarded and overwritten at this point.

XTFPGA platforms have a means to reset the CPU by writing 0xdead into a
specific FPGA IO address. When used in QEMU the kernel image loaded with
the '-kernel' option gets restored to its original state allowing the
machine to boot successfully.

Use that mechanism to attempt a platform reset. If it does not work,
fall back to the existing mechanism.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/xtensa/platforms/xtfpga/setup.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c
index 59b7f11f2a3e..538e6748e85a 100644
--- a/arch/xtensa/platforms/xtfpga/setup.c
+++ b/arch/xtensa/platforms/xtfpga/setup.c
@@ -51,8 +51,12 @@ void platform_power_off(void)
 
 void platform_restart(void)
 {
-	/* Flush and reset the mmu, simulate a processor reset, and
-	 * jump to the reset vector. */
+	/* Try software reset first. */
+	WRITE_ONCE(*(u32 *)XTFPGA_SWRST_VADDR, 0xdead);
+
+	/* If software reset did not work, flush and reset the mmu,
+	 * simulate a processor reset, and jump to the reset vector.
+	 */
 	cpu_reset();
 	/* control never gets here */
 }
-- 
2.33.0

[PATCH 5.10 11/95] NFSD: Keep existing listeners on portlist error

[Greg Kroah-Hartman]

From: Benjamin Coddington <bcodding@redhat.com>

[ Upstream commit c20106944eb679fa3ab7e686fe5f6ba30fbc51e5 ]

If nfsd has existing listening sockets without any processes, then an error
returned from svc_create_xprt() for an additional transport will remove
those existing listeners.  We're seeing this in practice when userspace
attempts to create rpcrdma transports without having the rpcrdma modules
present before creating nfsd kernel processes.  Fix this by checking for
existing sockets before calling nfsd_destroy().

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfsd/nfsctl.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
index ddf2b375632b..21c4ffda5f94 100644
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -792,7 +792,10 @@ out_close:
 		svc_xprt_put(xprt);
 	}
 out_err:
-	nfsd_destroy(net);
+	if (!list_empty(&nn->nfsd_serv->sv_permsocks))
+		nn->nfsd_serv->sv_nrthreads--;
+	 else
+		nfsd_destroy(net);
 	return err;
 }
 
-- 
2.33.0

[PATCH 5.10 12/95] netfilter: xt_IDLETIMER: fix panic that occurs when timer_type has garbage value

[Greg Kroah-Hartman]

From: Juhee Kang <claudiajkang@gmail.com>

[ Upstream commit 902c0b1887522a099aa4e1e6b4b476c2fe5dd13e ]

Currently, when the rule related to IDLETIMER is added, idletimer_tg timer
structure is initialized by kmalloc on executing idletimer_tg_create
function. However, in this process timer->timer_type is not defined to
a specific value. Thus, timer->timer_type has garbage value and it occurs
kernel panic. So, this commit fixes the panic by initializing
timer->timer_type using kzalloc instead of kmalloc.

Test commands:
    # iptables -A OUTPUT -j IDLETIMER --timeout 1 --label test
    $ cat /sys/class/xt_idletimer/timers/test
      Killed

Splat looks like:
    BUG: KASAN: user-memory-access in alarm_expires_remaining+0x49/0x70
    Read of size 8 at addr 0000002e8c7bc4c8 by task cat/917
    CPU: 12 PID: 917 Comm: cat Not tainted 5.14.0+ #3 79940a339f71eb14fc81aee1757a20d5bf13eb0e
    Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014
    Call Trace:
     dump_stack_lvl+0x6e/0x9c
     kasan_report.cold+0x112/0x117
     ? alarm_expires_remaining+0x49/0x70
     __asan_load8+0x86/0xb0
     alarm_expires_remaining+0x49/0x70
     idletimer_tg_show+0xe5/0x19b [xt_IDLETIMER 11219304af9316a21bee5ba9d58f76a6b9bccc6d]
     dev_attr_show+0x3c/0x60
     sysfs_kf_seq_show+0x11d/0x1f0
     ? device_remove_bin_file+0x20/0x20
     kernfs_seq_show+0xa4/0xb0
     seq_read_iter+0x29c/0x750
     kernfs_fop_read_iter+0x25a/0x2c0
     ? __fsnotify_parent+0x3d1/0x570
     ? iov_iter_init+0x70/0x90
     new_sync_read+0x2a7/0x3d0
     ? __x64_sys_llseek+0x230/0x230
     ? rw_verify_area+0x81/0x150
     vfs_read+0x17b/0x240
     ksys_read+0xd9/0x180
     ? vfs_write+0x460/0x460
     ? do_syscall_64+0x16/0xc0
     ? lockdep_hardirqs_on+0x79/0x120
     __x64_sys_read+0x43/0x50
     do_syscall_64+0x3b/0xc0
     entry_SYSCALL_64_after_hwframe+0x44/0xae
    RIP: 0033:0x7f0cdc819142
    Code: c0 e9 c2 fe ff ff 50 48 8d 3d 3a ca 0a 00 e8 f5 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24
    RSP: 002b:00007fff28eee5b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
    RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f0cdc819142
    RDX: 0000000000020000 RSI: 00007f0cdc032000 RDI: 0000000000000003
    RBP: 00007f0cdc032000 R08: 00007f0cdc031010 R09: 0000000000000000
    R10: 0000000000000022 R11: 0000000000000246 R12: 00005607e9ee31f0
    R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000

Fixes: 68983a354a65 ("netfilter: xtables: Add snapshot of hardidletimer target")
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/xt_IDLETIMER.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/xt_IDLETIMER.c b/net/netfilter/xt_IDLETIMER.c
index 7b2f359bfce4..2f7cf5ecebf4 100644
--- a/net/netfilter/xt_IDLETIMER.c
+++ b/net/netfilter/xt_IDLETIMER.c
@@ -137,7 +137,7 @@ static int idletimer_tg_create(struct idletimer_tg_info *info)
 {
 	int ret;
 
-	info->timer = kmalloc(sizeof(*info->timer), GFP_KERNEL);
+	info->timer = kzalloc(sizeof(*info->timer), GFP_KERNEL);
 	if (!info->timer) {
 		ret = -ENOMEM;
 		goto out;
-- 
2.33.0

[PATCH 5.10 13/95] dma-debug: fix sg checks in debug_dma_map_sg()

[Greg Kroah-Hartman]

From: Gerald Schaefer <gerald.schaefer@linux.ibm.com>

[ Upstream commit 293d92cbbd2418ca2ba43fed07f1b92e884d1c77 ]

The following warning occurred sporadically on s390:
DMA-API: nvme 0006:00:00.0: device driver maps memory from kernel text or rodata [addr=0000000048cc5e2f] [len=131072]
WARNING: CPU: 4 PID: 825 at kernel/dma/debug.c:1083 check_for_illegal_area+0xa8/0x138

It is a false-positive warning, due to broken logic in debug_dma_map_sg().
check_for_illegal_area() checks for overlay of sg elements with kernel text
or rodata. It is called with sg_dma_len(s) instead of s->length as
parameter. After the call to ->map_sg(), sg_dma_len() will contain the
length of possibly combined sg elements in the DMA address space, and not
the individual sg element length, which would be s->length.

The check will then use the physical start address of an sg element, and
add the DMA length for the overlap check, which could result in the false
warning, because the DMA length can be larger than the actual single sg
element length.

In addition, the call to check_for_illegal_area() happens in the iteration
over mapped_ents, which will not include all individual sg elements if
any of them were combined in ->map_sg().

Fix this by using s->length instead of sg_dma_len(s). Also put the call to
check_for_illegal_area() in a separate loop, iterating over all the
individual sg elements ("nents" instead of "mapped_ents").

While at it, as suggested by Robin Murphy, also move check_for_stack()
inside the new loop, as it is similarly concerned with validating the
individual sg elements.

Link: https://lore.kernel.org/lkml/20210705185252.4074653-1-gerald.schaefer@linux.ibm.com
Fixes: 884d05970bfb ("dma-debug: use sg_dma_len accessor")
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/dma/debug.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/kernel/dma/debug.c b/kernel/dma/debug.c
index 445754529917..10d07ace46c1 100644
--- a/kernel/dma/debug.c
+++ b/kernel/dma/debug.c
@@ -1300,6 +1300,12 @@ void debug_dma_map_sg(struct device *dev, struct scatterlist *sg,
 	if (unlikely(dma_debug_disabled()))
 		return;
 
+	for_each_sg(sg, s, nents, i) {
+		check_for_stack(dev, sg_page(s), s->offset);
+		if (!PageHighMem(sg_page(s)))
+			check_for_illegal_area(dev, sg_virt(s), s->length);
+	}
+
 	for_each_sg(sg, s, mapped_ents, i) {
 		entry = dma_entry_alloc();
 		if (!entry)
@@ -1315,12 +1321,6 @@ void debug_dma_map_sg(struct device *dev, struct scatterlist *sg,
 		entry->sg_call_ents   = nents;
 		entry->sg_mapped_ents = mapped_ents;
 
-		check_for_stack(dev, sg_page(s), s->offset);
-
-		if (!PageHighMem(sg_page(s))) {
-			check_for_illegal_area(dev, sg_virt(s), sg_dma_len(s));
-		}
-
 		check_sg_segment(dev, s);
 
 		add_dma_entry(entry);
-- 
2.33.0

[PATCH 5.10 14/95] ASoC: wm8960: Fix clock configuration on slave mode

[Greg Kroah-Hartman]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

[ Upstream commit 6b9b546dc00797c74bef491668ce5431ff54e1e2 ]

There is a noise issue for 8kHz sample rate on slave mode.
Compared with master mode, the difference is the DACDIV
setting, after correcting the DACDIV, the noise is gone.

There is no noise issue for 48kHz sample rate, because
the default value of DACDIV is correct for 48kHz.

So wm8960_configure_clocking() should be functional for
ADC and DAC function even if it is slave mode.

In order to be compatible for old use case, just add
condition for checking that sysclk is zero with
slave mode.

Fixes: 0e50b51aa22f ("ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1634102224-3922-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8960.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
index 9d325555e219..618692e2e0e4 100644
--- a/sound/soc/codecs/wm8960.c
+++ b/sound/soc/codecs/wm8960.c
@@ -742,9 +742,16 @@ static int wm8960_configure_clocking(struct snd_soc_component *component)
 	int i, j, k;
 	int ret;
 
-	if (!(iface1 & (1<<6))) {
-		dev_dbg(component->dev,
-			"Codec is slave mode, no need to configure clock\n");
+	/*
+	 * For Slave mode clocking should still be configured,
+	 * so this if statement should be removed, but some platform
+	 * may not work if the sysclk is not configured, to avoid such
+	 * compatible issue, just add '!wm8960->sysclk' condition in
+	 * this if statement.
+	 */
+	if (!(iface1 & (1 << 6)) && !wm8960->sysclk) {
+		dev_warn(component->dev,
+			 "slave mode, but proceeding with no clock configuration\n");
 		return 0;
 	}
 
-- 
2.33.0

[PATCH 5.10 15/95] ice: fix getting UDP tunnel entry

[Greg Kroah-Hartman]

From: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>

[ Upstream commit e4c2efa1393c6f1fbfabf91d1d83fcb4ae691ccb ]

Correct parameters order in call to ice_tunnel_idx_to_entry function.

Entry in sparse port table is correct when the idx is 0. For idx 1 one
correct entry should be skipped, for idx 2 two of them should be skipped
etc. Change if condition to be true when idx is 0, which means that
previous valid entry of this tunnel type were skipped.

Fixes: b20e6c17c468 ("ice: convert to new udp_tunnel infrastructure")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_flex_pipe.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_flex_pipe.c b/drivers/net/ethernet/intel/ice/ice_flex_pipe.c
index 9095b4d274ad..a81be917f653 100644
--- a/drivers/net/ethernet/intel/ice/ice_flex_pipe.c
+++ b/drivers/net/ethernet/intel/ice/ice_flex_pipe.c
@@ -1669,7 +1669,7 @@ static u16 ice_tunnel_idx_to_entry(struct ice_hw *hw, enum ice_tunnel_type type,
 	for (i = 0; i < hw->tnl.count && i < ICE_TUNNEL_MAX_ENTRIES; i++)
 		if (hw->tnl.tbl[i].valid &&
 		    hw->tnl.tbl[i].type == type &&
-		    idx--)
+		    idx-- == 0)
 			return i;
 
 	WARN_ON_ONCE(1);
@@ -1829,7 +1829,7 @@ int ice_udp_tunnel_set_port(struct net_device *netdev, unsigned int table,
 	u16 index;
 
 	tnl_type = ti->type == UDP_TUNNEL_TYPE_VXLAN ? TNL_VXLAN : TNL_GENEVE;
-	index = ice_tunnel_idx_to_entry(&pf->hw, idx, tnl_type);
+	index = ice_tunnel_idx_to_entry(&pf->hw, tnl_type, idx);
 
 	status = ice_create_tunnel(&pf->hw, index, tnl_type, ntohs(ti->port));
 	if (status) {
-- 
2.33.0

[PATCH 5.10 16/95] netfilter: ip6t_rt: fix rt0_hdr parsing in rt_mt6

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit a482c5e00a9b5a194085bcd372ac36141028becb ]

In rt_mt6(), when it's a nonlinear skb, the 1st skb_header_pointer()
only copies sizeof(struct ipv6_rt_hdr) to _route that rh points to.
The access by ((const struct rt0_hdr *)rh)->reserved will overflow
the buffer. So this access should be moved below the 2nd call to
skb_header_pointer().

Besides, after the 2nd skb_header_pointer(), its return value should
also be checked, othersize, *rp may cause null-pointer-ref.

v1->v2:
  - clean up some old debugging log.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/netfilter/ip6t_rt.c | 48 +++++-------------------------------
 1 file changed, 6 insertions(+), 42 deletions(-)

diff --git a/net/ipv6/netfilter/ip6t_rt.c b/net/ipv6/netfilter/ip6t_rt.c
index 733c83d38b30..4ad8b2032f1f 100644
--- a/net/ipv6/netfilter/ip6t_rt.c
+++ b/net/ipv6/netfilter/ip6t_rt.c
@@ -25,12 +25,7 @@ MODULE_AUTHOR("Andras Kis-Szabo <kisza@sch.bme.hu>");
 static inline bool
 segsleft_match(u_int32_t min, u_int32_t max, u_int32_t id, bool invert)
 {
-	bool r;
-	pr_debug("segsleft_match:%c 0x%x <= 0x%x <= 0x%x\n",
-		 invert ? '!' : ' ', min, id, max);
-	r = (id >= min && id <= max) ^ invert;
-	pr_debug(" result %s\n", r ? "PASS" : "FAILED");
-	return r;
+	return (id >= min && id <= max) ^ invert;
 }
 
 static bool rt_mt6(const struct sk_buff *skb, struct xt_action_param *par)
@@ -65,30 +60,6 @@ static bool rt_mt6(const struct sk_buff *skb, struct xt_action_param *par)
 		return false;
 	}
 
-	pr_debug("IPv6 RT LEN %u %u ", hdrlen, rh->hdrlen);
-	pr_debug("TYPE %04X ", rh->type);
-	pr_debug("SGS_LEFT %u %02X\n", rh->segments_left, rh->segments_left);
-
-	pr_debug("IPv6 RT segsleft %02X ",
-		 segsleft_match(rtinfo->segsleft[0], rtinfo->segsleft[1],
-				rh->segments_left,
-				!!(rtinfo->invflags & IP6T_RT_INV_SGS)));
-	pr_debug("type %02X %02X %02X ",
-		 rtinfo->rt_type, rh->type,
-		 (!(rtinfo->flags & IP6T_RT_TYP) ||
-		  ((rtinfo->rt_type == rh->type) ^
-		   !!(rtinfo->invflags & IP6T_RT_INV_TYP))));
-	pr_debug("len %02X %04X %02X ",
-		 rtinfo->hdrlen, hdrlen,
-		 !(rtinfo->flags & IP6T_RT_LEN) ||
-		  ((rtinfo->hdrlen == hdrlen) ^
-		   !!(rtinfo->invflags & IP6T_RT_INV_LEN)));
-	pr_debug("res %02X %02X %02X ",
-		 rtinfo->flags & IP6T_RT_RES,
-		 ((const struct rt0_hdr *)rh)->reserved,
-		 !((rtinfo->flags & IP6T_RT_RES) &&
-		   (((const struct rt0_hdr *)rh)->reserved)));
-
 	ret = (segsleft_match(rtinfo->segsleft[0], rtinfo->segsleft[1],
 			      rh->segments_left,
 			      !!(rtinfo->invflags & IP6T_RT_INV_SGS))) &&
@@ -107,22 +78,22 @@ static bool rt_mt6(const struct sk_buff *skb, struct xt_action_param *par)
 						       reserved),
 					sizeof(_reserved),
 					&_reserved);
+		if (!rp) {
+			par->hotdrop = true;
+			return false;
+		}
 
 		ret = (*rp == 0);
 	}
 
-	pr_debug("#%d ", rtinfo->addrnr);
 	if (!(rtinfo->flags & IP6T_RT_FST)) {
 		return ret;
 	} else if (rtinfo->flags & IP6T_RT_FST_NSTRICT) {
-		pr_debug("Not strict ");
 		if (rtinfo->addrnr > (unsigned int)((hdrlen - 8) / 16)) {
-			pr_debug("There isn't enough space\n");
 			return false;
 		} else {
 			unsigned int i = 0;
 
-			pr_debug("#%d ", rtinfo->addrnr);
 			for (temp = 0;
 			     temp < (unsigned int)((hdrlen - 8) / 16);
 			     temp++) {
@@ -138,26 +109,20 @@ static bool rt_mt6(const struct sk_buff *skb, struct xt_action_param *par)
 					return false;
 				}
 
-				if (ipv6_addr_equal(ap, &rtinfo->addrs[i])) {
-					pr_debug("i=%d temp=%d;\n", i, temp);
+				if (ipv6_addr_equal(ap, &rtinfo->addrs[i]))
 					i++;
-				}
 				if (i == rtinfo->addrnr)
 					break;
 			}
-			pr_debug("i=%d #%d\n", i, rtinfo->addrnr);
 			if (i == rtinfo->addrnr)
 				return ret;
 			else
 				return false;
 		}
 	} else {
-		pr_debug("Strict ");
 		if (rtinfo->addrnr > (unsigned int)((hdrlen - 8) / 16)) {
-			pr_debug("There isn't enough space\n");
 			return false;
 		} else {
-			pr_debug("#%d ", rtinfo->addrnr);
 			for (temp = 0; temp < rtinfo->addrnr; temp++) {
 				ap = skb_header_pointer(skb,
 							ptr
@@ -173,7 +138,6 @@ static bool rt_mt6(const struct sk_buff *skb, struct xt_action_param *par)
 				if (!ipv6_addr_equal(ap, &rtinfo->addrs[temp]))
 					break;
 			}
-			pr_debug("temp=%d #%d\n", temp, rtinfo->addrnr);
 			if (temp == rtinfo->addrnr &&
 			    temp == (unsigned int)((hdrlen - 8) / 16))
 				return ret;
-- 
2.33.0

[PATCH 5.10 17/95] netfilter: ipvs: make global sysctl readonly in non-init netns

[Greg Kroah-Hartman]

From: Antoine Tenart <atenart@kernel.org>

[ Upstream commit 174c376278949c44aad89c514a6b5db6cee8db59 ]

Because the data pointer of net/ipv4/vs/debug_level is not updated per
netns, it must be marked as read-only in non-init netns.

Fixes: c6d2d445d8de ("IPVS: netns, final patch enabling network name space.")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipvs/ip_vs_ctl.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index c25097092a06..29ec3ef63edc 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -4090,6 +4090,11 @@ static int __net_init ip_vs_control_net_init_sysctl(struct netns_ipvs *ipvs)
 	tbl[idx++].data = &ipvs->sysctl_conn_reuse_mode;
 	tbl[idx++].data = &ipvs->sysctl_schedule_icmp;
 	tbl[idx++].data = &ipvs->sysctl_ignore_tunneled;
+#ifdef CONFIG_IP_VS_DEBUG
+	/* Global sysctls must be ro in non-init netns */
+	if (!net_eq(net, &init_net))
+		tbl[idx++].mode = 0444;
+#endif
 
 	ipvs->sysctl_hdr = register_net_sysctl(net, "net/ipv4/vs", tbl);
 	if (ipvs->sysctl_hdr == NULL) {
-- 
2.33.0

[PATCH 5.10 18/95] lan78xx: select CRC32

[Greg Kroah-Hartman]

From: Vegard Nossum <vegard.nossum@oracle.com>

[ Upstream commit 46393d61a328d7c4e3264252dae891921126c674 ]

Fix the following build/link error by adding a dependency on the CRC32
routines:

  ld: drivers/net/usb/lan78xx.o: in function `lan78xx_set_multicast':
  lan78xx.c:(.text+0x48cf): undefined reference to `crc32_le'

The actual use of crc32_le() comes indirectly through ether_crc().

Fixes: 55d7de9de6c30 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 4efad42b9aa9..867ff2ee8ecf 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -117,6 +117,7 @@ config USB_LAN78XX
 	select PHYLIB
 	select MICROCHIP_PHY
 	select FIXED_PHY
+	select CRC32
 	help
 	  This option adds support for Microchip LAN78XX based USB 2
 	  & USB 3 10/100/1000 Ethernet adapters.
-- 
2.33.0

[PATCH 5.10 19/95] tcp: md5: Fix overlap between vrf and non-vrf keys

[Greg Kroah-Hartman]

From: Leonard Crestez <cdleonard@gmail.com>

[ Upstream commit 86f1e3a8489f6a0232c1f3bc2bdb379f5ccdecec ]

With net.ipv4.tcp_l3mdev_accept=1 it is possible for a listen socket to
accept connection from the same client address in different VRFs. It is
also possible to set different MD5 keys for these clients which differ
only in the tcpm_l3index field.

This appears to work when distinguishing between different VRFs but not
between non-VRF and VRF connections. In particular:

 * tcp_md5_do_lookup_exact will match a non-vrf key against a vrf key.
This means that adding a key with l3index != 0 after a key with l3index
== 0 will cause the earlier key to be deleted. Both keys can be present
if the non-vrf key is added later.
 * _tcp_md5_do_lookup can match a non-vrf key before a vrf key. This
casues failures if the passwords differ.

Fix this by making tcp_md5_do_lookup_exact perform an actual exact
comparison on l3index and by making  __tcp_md5_do_lookup perfer
vrf-bound keys above other considerations like prefixlen.

Fixes: dea53bb80e07 ("tcp: Add l3index to tcp_md5sig_key and md5 functions")
Signed-off-by: Leonard Crestez <cdleonard@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_ipv4.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 71395e745bc5..017cd666387f 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1022,6 +1022,20 @@ static void tcp_v4_reqsk_destructor(struct request_sock *req)
 DEFINE_STATIC_KEY_FALSE(tcp_md5_needed);
 EXPORT_SYMBOL(tcp_md5_needed);
 
+static bool better_md5_match(struct tcp_md5sig_key *old, struct tcp_md5sig_key *new)
+{
+	if (!old)
+		return true;
+
+	/* l3index always overrides non-l3index */
+	if (old->l3index && new->l3index == 0)
+		return false;
+	if (old->l3index == 0 && new->l3index)
+		return true;
+
+	return old->prefixlen < new->prefixlen;
+}
+
 /* Find the Key structure for an address.  */
 struct tcp_md5sig_key *__tcp_md5_do_lookup(const struct sock *sk, int l3index,
 					   const union tcp_md5_addr *addr,
@@ -1059,8 +1073,7 @@ struct tcp_md5sig_key *__tcp_md5_do_lookup(const struct sock *sk, int l3index,
 			match = false;
 		}
 
-		if (match && (!best_match ||
-			      key->prefixlen > best_match->prefixlen))
+		if (match && better_md5_match(best_match, key))
 			best_match = key;
 	}
 	return best_match;
@@ -1090,7 +1103,7 @@ static struct tcp_md5sig_key *tcp_md5_do_lookup_exact(const struct sock *sk,
 				 lockdep_sock_is_held(sk)) {
 		if (key->family != family)
 			continue;
-		if (key->l3index && key->l3index != l3index)
+		if (key->l3index != l3index)
 			continue;
 		if (!memcmp(&key->addr, addr, size) &&
 		    key->prefixlen == prefixlen)
-- 
2.33.0

[PATCH 5.10 20/95] ipv6: When forwarding count rx stats on the orig netdev

[Greg Kroah-Hartman]

From: Stephen Suryaputra <ssuryaextr@gmail.com>

[ Upstream commit 0857d6f8c759d95f89d0436f86cdfd189ef99f20 ]

Commit bdb7cc643fc9 ("ipv6: Count interface receive statistics on the
ingress netdev") does not work when ip6_forward() executes on the skbs
with vrf-enslaved netdev. Use IP6CB(skb)->iif to get to the right one.

Add a selftest script to verify.

Fixes: bdb7cc643fc9 ("ipv6: Count interface receive statistics on the ingress netdev")
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211014130845.410602-1-ssuryaextr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/ip6_output.c                         |   3 +-
 .../testing/selftests/net/forwarding/Makefile |   1 +
 .../net/forwarding/forwarding.config.sample   |   2 +
 .../net/forwarding/ip6_forward_instats_vrf.sh | 172 ++++++++++++++++++
 tools/testing/selftests/net/forwarding/lib.sh |   8 +
 5 files changed, 185 insertions(+), 1 deletion(-)
 create mode 100755 tools/testing/selftests/net/forwarding/ip6_forward_instats_vrf.sh

diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 72a673a43a75..c2f8e69d7d7a 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -487,13 +487,14 @@ static bool ip6_pkt_too_big(const struct sk_buff *skb, unsigned int mtu)
 
 int ip6_forward(struct sk_buff *skb)
 {
-	struct inet6_dev *idev = __in6_dev_get_safely(skb->dev);
 	struct dst_entry *dst = skb_dst(skb);
 	struct ipv6hdr *hdr = ipv6_hdr(skb);
 	struct inet6_skb_parm *opt = IP6CB(skb);
 	struct net *net = dev_net(dst->dev);
+	struct inet6_dev *idev;
 	u32 mtu;
 
+	idev = __in6_dev_get_safely(dev_get_by_index_rcu(net, IP6CB(skb)->iif));
 	if (net->ipv6.devconf_all->forwarding == 0)
 		goto error;
 
diff --git a/tools/testing/selftests/net/forwarding/Makefile b/tools/testing/selftests/net/forwarding/Makefile
index 250fbb2d1625..881e680c2e9c 100644
--- a/tools/testing/selftests/net/forwarding/Makefile
+++ b/tools/testing/selftests/net/forwarding/Makefile
@@ -9,6 +9,7 @@ TEST_PROGS = bridge_igmp.sh \
 	gre_inner_v4_multipath.sh \
 	gre_inner_v6_multipath.sh \
 	gre_multipath.sh \
+	ip6_forward_instats_vrf.sh \
 	ip6gre_inner_v4_multipath.sh \
 	ip6gre_inner_v6_multipath.sh \
 	ipip_flat_gre_key.sh \
diff --git a/tools/testing/selftests/net/forwarding/forwarding.config.sample b/tools/testing/selftests/net/forwarding/forwarding.config.sample
index b802c14d2950..e5e2fbeca22e 100644
--- a/tools/testing/selftests/net/forwarding/forwarding.config.sample
+++ b/tools/testing/selftests/net/forwarding/forwarding.config.sample
@@ -39,3 +39,5 @@ NETIF_CREATE=yes
 # Timeout (in seconds) before ping exits regardless of how many packets have
 # been sent or received
 PING_TIMEOUT=5
+# IPv6 traceroute utility name.
+TROUTE6=traceroute6
diff --git a/tools/testing/selftests/net/forwarding/ip6_forward_instats_vrf.sh b/tools/testing/selftests/net/forwarding/ip6_forward_instats_vrf.sh
new file mode 100755
index 000000000000..9f5b3e2e5e95
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ip6_forward_instats_vrf.sh
@@ -0,0 +1,172 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test ipv6 stats on the incoming if when forwarding with VRF
+
+ALL_TESTS="
+	ipv6_ping
+	ipv6_in_too_big_err
+	ipv6_in_hdr_err
+	ipv6_in_addr_err
+	ipv6_in_discard
+"
+
+NUM_NETIFS=4
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 2001:1:1::2/64
+	ip -6 route add vrf v$h1 2001:1:2::/64 via 2001:1:1::1
+}
+
+h1_destroy()
+{
+	ip -6 route del vrf v$h1 2001:1:2::/64 via 2001:1:1::1
+	simple_if_fini $h1 2001:1:1::2/64
+}
+
+router_create()
+{
+	vrf_create router
+	__simple_if_init $rtr1 router 2001:1:1::1/64
+	__simple_if_init $rtr2 router 2001:1:2::1/64
+	mtu_set $rtr2 1280
+}
+
+router_destroy()
+{
+	mtu_restore $rtr2
+	__simple_if_fini $rtr2 2001:1:2::1/64
+	__simple_if_fini $rtr1 2001:1:1::1/64
+	vrf_destroy router
+}
+
+h2_create()
+{
+	simple_if_init $h2 2001:1:2::2/64
+	ip -6 route add vrf v$h2 2001:1:1::/64 via 2001:1:2::1
+	mtu_set $h2 1280
+}
+
+h2_destroy()
+{
+	mtu_restore $h2
+	ip -6 route del vrf v$h2 2001:1:1::/64 via 2001:1:2::1
+	simple_if_fini $h2 2001:1:2::2/64
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rtr1=${NETIFS[p2]}
+
+	rtr2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+	h1_create
+	router_create
+	h2_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	h2_destroy
+	router_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+ipv6_in_too_big_err()
+{
+	RET=0
+
+	local t0=$(ipv6_stats_get $rtr1 Ip6InTooBigErrors)
+	local vrf_name=$(master_name_get $h1)
+
+	# Send too big packets
+	ip vrf exec $vrf_name \
+		$PING6 -s 1300 2001:1:2::2 -c 1 -w $PING_TIMEOUT &> /dev/null
+
+	local t1=$(ipv6_stats_get $rtr1 Ip6InTooBigErrors)
+	test "$((t1 - t0))" -ne 0
+	check_err $?
+	log_test "Ip6InTooBigErrors"
+}
+
+ipv6_in_hdr_err()
+{
+	RET=0
+
+	local t0=$(ipv6_stats_get $rtr1 Ip6InHdrErrors)
+	local vrf_name=$(master_name_get $h1)
+
+	# Send packets with hop limit 1, easiest with traceroute6 as some ping6
+	# doesn't allow hop limit to be specified
+	ip vrf exec $vrf_name \
+		$TROUTE6 2001:1:2::2 &> /dev/null
+
+	local t1=$(ipv6_stats_get $rtr1 Ip6InHdrErrors)
+	test "$((t1 - t0))" -ne 0
+	check_err $?
+	log_test "Ip6InHdrErrors"
+}
+
+ipv6_in_addr_err()
+{
+	RET=0
+
+	local t0=$(ipv6_stats_get $rtr1 Ip6InAddrErrors)
+	local vrf_name=$(master_name_get $h1)
+
+	# Disable forwarding temporary while sending the packet
+	sysctl -qw net.ipv6.conf.all.forwarding=0
+	ip vrf exec $vrf_name \
+		$PING6 2001:1:2::2 -c 1 -w $PING_TIMEOUT &> /dev/null
+	sysctl -qw net.ipv6.conf.all.forwarding=1
+
+	local t1=$(ipv6_stats_get $rtr1 Ip6InAddrErrors)
+	test "$((t1 - t0))" -ne 0
+	check_err $?
+	log_test "Ip6InAddrErrors"
+}
+
+ipv6_in_discard()
+{
+	RET=0
+
+	local t0=$(ipv6_stats_get $rtr1 Ip6InDiscards)
+	local vrf_name=$(master_name_get $h1)
+
+	# Add a policy to discard
+	ip xfrm policy add dst 2001:1:2::2/128 dir fwd action block
+	ip vrf exec $vrf_name \
+		$PING6 2001:1:2::2 -c 1 -w $PING_TIMEOUT &> /dev/null
+	ip xfrm policy del dst 2001:1:2::2/128 dir fwd
+
+	local t1=$(ipv6_stats_get $rtr1 Ip6InDiscards)
+	test "$((t1 - t0))" -ne 0
+	check_err $?
+	log_test "Ip6InDiscards"
+}
+ipv6_ping()
+{
+	RET=0
+
+	ping6_test $h1 2001:1:2::2
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 927f9ba49e08..be6fa808d219 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -674,6 +674,14 @@ qdisc_parent_stats_get()
 	    | jq '.[] | select(.parent == "'"$parent"'") | '"$selector"
 }
 
+ipv6_stats_get()
+{
+	local dev=$1; shift
+	local stat=$1; shift
+
+	cat /proc/net/dev_snmp6/$dev | grep "^$stat" | cut -f2
+}
+
 humanize()
 {
 	local speed=$1; shift
-- 
2.33.0

[PATCH 5.10 21/95] net: dsa: lantiq_gswip: fix register definition

[Greg Kroah-Hartman]

From: Aleksander Jan Bajkowski <olek2@wp.pl>

[ Upstream commit 66d262804a2276721eac86cf18fcd61046149193 ]

I compared the register definitions with the D-Link DWR-966
GPL sources and found that the PUAFD field definition was
incorrect. This definition is unused and causes no issues.

Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/lantiq_gswip.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 95e634cbc4b6..4d23a7aba796 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -229,7 +229,7 @@
 #define GSWIP_SDMA_PCTRLp(p)		(0xBC0 + ((p) * 0x6))
 #define  GSWIP_SDMA_PCTRL_EN		BIT(0)	/* SDMA Port Enable */
 #define  GSWIP_SDMA_PCTRL_FCEN		BIT(1)	/* Flow Control Enable */
-#define  GSWIP_SDMA_PCTRL_PAUFWD	BIT(1)	/* Pause Frame Forwarding */
+#define  GSWIP_SDMA_PCTRL_PAUFWD	BIT(3)	/* Pause Frame Forwarding */
 
 #define GSWIP_TABLE_ACTIVE_VLAN		0x01
 #define GSWIP_TABLE_VLAN_MAPPING	0x02
-- 
2.33.0

[PATCH 5.10 22/95] NIOS2: irqflags: rename a redefined register name

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 4cce60f15c04d69eff6ffc539ab09137dbe15070 ]

Both arch/nios2/ and drivers/mmc/host/tmio_mmc.c define a macro
with the name "CTL_STATUS". Change the one in arch/nios2/ to be
"CTL_FSTATUS" (flags status) to eliminate the build warning.

In file included from ../drivers/mmc/host/tmio_mmc.c:22:
drivers/mmc/host/tmio_mmc.h:31: warning: "CTL_STATUS" redefined
   31 | #define CTL_STATUS 0x1c
arch/nios2/include/asm/registers.h:14: note: this is the location of the previous definition
   14 | #define CTL_STATUS      0

Fixes: b31ebd8055ea ("nios2: Nios2 registers")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/nios2/include/asm/irqflags.h  | 4 ++--
 arch/nios2/include/asm/registers.h | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/nios2/include/asm/irqflags.h b/arch/nios2/include/asm/irqflags.h
index b3ec3e510706..25acf27862f9 100644
--- a/arch/nios2/include/asm/irqflags.h
+++ b/arch/nios2/include/asm/irqflags.h
@@ -9,7 +9,7 @@
 
 static inline unsigned long arch_local_save_flags(void)
 {
-	return RDCTL(CTL_STATUS);
+	return RDCTL(CTL_FSTATUS);
 }
 
 /*
@@ -18,7 +18,7 @@ static inline unsigned long arch_local_save_flags(void)
  */
 static inline void arch_local_irq_restore(unsigned long flags)
 {
-	WRCTL(CTL_STATUS, flags);
+	WRCTL(CTL_FSTATUS, flags);
 }
 
 static inline void arch_local_irq_disable(void)
diff --git a/arch/nios2/include/asm/registers.h b/arch/nios2/include/asm/registers.h
index 183c720e454d..95b67dd16f81 100644
--- a/arch/nios2/include/asm/registers.h
+++ b/arch/nios2/include/asm/registers.h
@@ -11,7 +11,7 @@
 #endif
 
 /* control register numbers */
-#define CTL_STATUS	0
+#define CTL_FSTATUS	0
 #define CTL_ESTATUS	1
 #define CTL_BSTATUS	2
 #define CTL_IENABLE	3
-- 
2.33.0

[PATCH 5.10 23/95] powerpc/smp: do not decrement idle task preempt count in CPU offline

[Greg Kroah-Hartman]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit 787252a10d9422f3058df9a4821f389e5326c440 ]

With PREEMPT_COUNT=y, when a CPU is offlined and then onlined again, we
get:

BUG: scheduling while atomic: swapper/1/0/0x00000000
no locks held by swapper/1/0.
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.15.0-rc2+ #100
Call Trace:
 dump_stack_lvl+0xac/0x108
 __schedule_bug+0xac/0xe0
 __schedule+0xcf8/0x10d0
 schedule_idle+0x3c/0x70
 do_idle+0x2d8/0x4a0
 cpu_startup_entry+0x38/0x40
 start_secondary+0x2ec/0x3a0
 start_secondary_prolog+0x10/0x14

This is because powerpc's arch_cpu_idle_dead() decrements the idle task's
preempt count, for reasons explained in commit a7c2bb8279d2 ("powerpc:
Re-enable preemption before cpu_die()"), specifically "start_secondary()
expects a preempt_count() of 0."

However, since commit 2c669ef6979c ("powerpc/preempt: Don't touch the idle
task's preempt_count during hotplug") and commit f1a0a376ca0c ("sched/core:
Initialize the idle task with preemption disabled"), that justification no
longer holds.

The idle task isn't supposed to re-enable preemption, so remove the
vestigial preempt_enable() from the CPU offline path.

Tested with pseries and powernv in qemu, and pseries on PowerVM.

Fixes: 2c669ef6979c ("powerpc/preempt: Don't touch the idle task's preempt_count during hotplug")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211015173902.2278118-1-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/smp.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 91f274134884..452cbf98bfd7 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -1578,8 +1578,6 @@ void __cpu_die(unsigned int cpu)
 
 void arch_cpu_idle_dead(void)
 {
-	sched_preempt_enable_no_resched();
-
 	/*
 	 * Disable on the down path. This will be re-enabled by
 	 * start_secondary() via start_secondary_resume() below
-- 
2.33.0

[PATCH 5.10 24/95] net: hns3: reset DWRR of unused tc to zero

[Greg Kroah-Hartman]

From: Guangbin Huang <huangguangbin2@huawei.com>

[ Upstream commit b63fcaab959807282e9822e659034edf95fc8bd1 ]

Currently, DWRR of tc will be initialized to a fixed value when this tc
is enabled, but it is not been reset to 0 when this tc is disabled. It
cause a problem that the DWRR of unused tc is not 0 after using tc tool
to add and delete multi-tc parameters.

For examples, after enabling 4 TCs and restoring to 1 TC by follow
tc commands:

$ tc qdisc add dev eth0 root mqprio num_tc 4 map 0 1 2 3 0 1 2 3 queues \
  8@0 8@8 8@16 8@24 hw 1 mode channel
$ tc qdisc del dev eth0 root

Now there is just one TC is enabled for eth0, but the tc info querying by
debugfs is shown as follow:

$ cat /mnt/hns3/0000:7d:00.0/tm/tc_sch_info
enabled tc number: 1
weight_offset: 14
TC    MODE  WEIGHT
0     dwrr    100
1     dwrr    100
2     dwrr    100
3     dwrr    100
4     dwrr      0
5     dwrr      0
6     dwrr      0
7     dwrr      0

This patch fixes it by resetting DWRR of tc to 0 when tc is disabled.

Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
index 69d081515c60..71aa6d16fc19 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
@@ -671,6 +671,8 @@ static void hclge_tm_pg_info_init(struct hclge_dev *hdev)
 		hdev->tm_info.pg_info[i].tc_bit_map = hdev->hw_tc_map;
 		for (k = 0; k < hdev->tm_info.num_tc; k++)
 			hdev->tm_info.pg_info[i].tc_dwrr[k] = BW_PERCENT;
+		for (; k < HNAE3_MAX_TC; k++)
+			hdev->tm_info.pg_info[i].tc_dwrr[k] = 0;
 	}
 }
 
-- 
2.33.0

[PATCH 5.10 25/95] net: hns3: add limit ets dwrr bandwidth cannot be 0

[Greg Kroah-Hartman]

From: Guangbin Huang <huangguangbin2@huawei.com>

[ Upstream commit 731797fdffa3d083db536e2fdd07ceb050bb40b1 ]

If ets dwrr bandwidth of tc is set to 0, the hardware will switch to SP
mode. In this case, this tc may occupy all the tx bandwidth if it has
huge traffic, so it violates the purpose of the user setting.

To fix this problem, limit the ets dwrr bandwidth must greater than 0.

Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
index 28a90ead4795..8e6085753b9f 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
@@ -134,6 +134,15 @@ static int hclge_ets_validate(struct hclge_dev *hdev, struct ieee_ets *ets,
 				*changed = true;
 			break;
 		case IEEE_8021QAZ_TSA_ETS:
+			/* The hardware will switch to sp mode if bandwidth is
+			 * 0, so limit ets bandwidth must be greater than 0.
+			 */
+			if (!ets->tc_tx_bw[i]) {
+				dev_err(&hdev->pdev->dev,
+					"tc%u ets bw cannot be 0\n", i);
+				return -EINVAL;
+			}
+
 			if (hdev->tm_info.tc_info[i].tc_sch_mode !=
 				HCLGE_SCH_MODE_DWRR)
 				*changed = true;
-- 
2.33.0

[PATCH 5.10 26/95] net: hns3: schedule the polling again when allocation fails

[Greg Kroah-Hartman]

From: Yunsheng Lin <linyunsheng@huawei.com>

[ Upstream commit 68752b24f51a71d4f350a764d890b670f59062c5 ]

Currently when there is a rx page allocation failure, it is
possible that polling may be stopped if there is no more packet
to be reveiced, which may cause queue stall problem under memory
pressure.

This patch makes sure polling is scheduled again when there is
any rx page allocation failure, and polling will try to allocate
receive buffers until it succeeds.

Now the allocation retry is added, it is unnecessary to do the rx
page allocation at the end of rx cleaning, so remove it. And reset
the unused_count to zero after calling hns3_nic_alloc_rx_buffers()
to avoid calling hns3_nic_alloc_rx_buffers() repeatedly under
memory pressure.

Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/hisilicon/hns3/hns3_enet.c   | 22 ++++++++++---------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 4777db2623cf..e2790deb6dab 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -2637,7 +2637,8 @@ static int hns3_desc_unused(struct hns3_enet_ring *ring)
 	return ((ntc >= ntu) ? 0 : ring->desc_num) + ntc - ntu;
 }
 
-static void hns3_nic_alloc_rx_buffers(struct hns3_enet_ring *ring,
+/* Return true if there is any allocation failure */
+static bool hns3_nic_alloc_rx_buffers(struct hns3_enet_ring *ring,
 				      int cleand_count)
 {
 	struct hns3_desc_cb *desc_cb;
@@ -2662,7 +2663,10 @@ static void hns3_nic_alloc_rx_buffers(struct hns3_enet_ring *ring,
 				hns3_rl_err(ring_to_netdev(ring),
 					    "alloc rx buffer failed: %d\n",
 					    ret);
-				break;
+
+				writel(i, ring->tqp->io_base +
+				       HNS3_RING_RX_RING_HEAD_REG);
+				return true;
 			}
 			hns3_replace_buffer(ring, ring->next_to_use, &res_cbs);
 
@@ -2675,6 +2679,7 @@ static void hns3_nic_alloc_rx_buffers(struct hns3_enet_ring *ring,
 	}
 
 	writel(i, ring->tqp->io_base + HNS3_RING_RX_RING_HEAD_REG);
+	return false;
 }
 
 static bool hns3_page_is_reusable(struct page *page)
@@ -3218,6 +3223,7 @@ int hns3_clean_rx_ring(struct hns3_enet_ring *ring, int budget,
 {
 #define RCB_NOF_ALLOC_RX_BUFF_ONCE 16
 	int unused_count = hns3_desc_unused(ring);
+	bool failure = false;
 	int recv_pkts = 0;
 	int err;
 
@@ -3226,9 +3232,9 @@ int hns3_clean_rx_ring(struct hns3_enet_ring *ring, int budget,
 	while (recv_pkts < budget) {
 		/* Reuse or realloc buffers */
 		if (unused_count >= RCB_NOF_ALLOC_RX_BUFF_ONCE) {
-			hns3_nic_alloc_rx_buffers(ring, unused_count);
-			unused_count = hns3_desc_unused(ring) -
-					ring->pending_buf;
+			failure = failure ||
+				hns3_nic_alloc_rx_buffers(ring, unused_count);
+			unused_count = 0;
 		}
 
 		/* Poll one pkt */
@@ -3247,11 +3253,7 @@ int hns3_clean_rx_ring(struct hns3_enet_ring *ring, int budget,
 	}
 
 out:
-	/* Make all data has been write before submit */
-	if (unused_count > 0)
-		hns3_nic_alloc_rx_buffers(ring, unused_count);
-
-	return recv_pkts;
+	return failure ? budget : recv_pkts;
 }
 
 static bool hns3_get_new_flow_lvl(struct hns3_enet_ring_group *ring_group)
-- 
2.33.0

[PATCH 5.10 27/95] net: hns3: fix vf reset workqueue cannot exit

[Greg Kroah-Hartman]

From: Yufeng Mo <moyufeng@huawei.com>

[ Upstream commit 1385cc81baeb3bd8cbbbcdc1557f038ac1712529 ]

The task of VF reset is performed through the workqueue. It checks the
value of hdev->reset_pending to determine whether to exit the loop.
However, the value of hdev->reset_pending may also be assigned by
the interrupt function hclgevf_misc_irq_handle(), which may cause the
loop fail to exit and keep occupying the workqueue. This loop is not
necessary, so remove it and the workqueue will be rescheduled if the
reset needs to be retried or a new reset occurs.

Fixes: 1cc9bc6e5867 ("net: hns3: split hclgevf_reset() into preparing and rebuilding part")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 3641d7c31451..a47f23f27a11 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -2160,9 +2160,9 @@ static void hclgevf_reset_service_task(struct hclgevf_dev *hdev)
 		hdev->reset_attempts = 0;
 
 		hdev->last_reset_time = jiffies;
-		while ((hdev->reset_type =
-			hclgevf_get_reset_level(hdev, &hdev->reset_pending))
-		       != HNAE3_NONE_RESET)
+		hdev->reset_type =
+			hclgevf_get_reset_level(hdev, &hdev->reset_pending);
+		if (hdev->reset_type != HNAE3_NONE_RESET)
 			hclgevf_reset(hdev);
 	} else if (test_and_clear_bit(HCLGEVF_RESET_REQUESTED,
 				      &hdev->reset_state)) {
-- 
2.33.0

[PATCH 5.10 28/95] net: hns3: disable sriov before unload hclge layer

[Greg Kroah-Hartman]

From: Peng Li <lipeng321@huawei.com>

[ Upstream commit 0dd8a25f355b4df2d41c08df1716340854c7d4c5 ]

HNS3 driver includes hns3.ko, hnae3.ko and hclge.ko.
hns3.ko includes network stack and pci_driver, hclge.ko includes
HW device action, algo_ops and timer task, hnae3.ko includes some
register function.

When SRIOV is enable and hclge.ko is removed, HW device is unloaded
but VF still exists, PF will not reply VF mbx messages, and cause
errors.

This patch fix it by disable SRIOV before remove hclge.ko.

Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hnae3.c   | 21 +++++++++++++++++++
 drivers/net/ethernet/hisilicon/hns3/hnae3.h   |  1 +
 .../hisilicon/hns3/hns3pf/hclge_main.c        |  1 +
 3 files changed, 23 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.c b/drivers/net/ethernet/hisilicon/hns3/hnae3.c
index eef1b2764d34..67b0bf310daa 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.c
@@ -10,6 +10,27 @@ static LIST_HEAD(hnae3_ae_algo_list);
 static LIST_HEAD(hnae3_client_list);
 static LIST_HEAD(hnae3_ae_dev_list);
 
+void hnae3_unregister_ae_algo_prepare(struct hnae3_ae_algo *ae_algo)
+{
+	const struct pci_device_id *pci_id;
+	struct hnae3_ae_dev *ae_dev;
+
+	if (!ae_algo)
+		return;
+
+	list_for_each_entry(ae_dev, &hnae3_ae_dev_list, node) {
+		if (!hnae3_get_bit(ae_dev->flag, HNAE3_DEV_INITED_B))
+			continue;
+
+		pci_id = pci_match_id(ae_algo->pdev_id_table, ae_dev->pdev);
+		if (!pci_id)
+			continue;
+		if (IS_ENABLED(CONFIG_PCI_IOV))
+			pci_disable_sriov(ae_dev->pdev);
+	}
+}
+EXPORT_SYMBOL(hnae3_unregister_ae_algo_prepare);
+
 /* we are keeping things simple and using single lock for all the
  * list. This is a non-critical code so other updations, if happen
  * in parallel, can wait.
diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index 912c51e327d6..4a9576a449e1 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -754,6 +754,7 @@ struct hnae3_handle {
 int hnae3_register_ae_dev(struct hnae3_ae_dev *ae_dev);
 void hnae3_unregister_ae_dev(struct hnae3_ae_dev *ae_dev);
 
+void hnae3_unregister_ae_algo_prepare(struct hnae3_ae_algo *ae_algo);
 void hnae3_unregister_ae_algo(struct hnae3_ae_algo *ae_algo);
 void hnae3_register_ae_algo(struct hnae3_ae_algo *ae_algo);
 
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 0e869f449f12..7b94764b4f5d 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -11518,6 +11518,7 @@ static int hclge_init(void)
 
 static void hclge_exit(void)
 {
+	hnae3_unregister_ae_algo_prepare(&ae_algo);
 	hnae3_unregister_ae_algo(&ae_algo);
 	destroy_workqueue(hclge_wq);
 }
-- 
2.33.0

[PATCH 5.10 29/95] net: stmmac: Fix E2E delay mechanism

[Greg Kroah-Hartman]

From: Kurt Kanzenbach <kurt@linutronix.de>

[ Upstream commit 3cb958027cb8b78d3ee639ce9af54c2ef1bf964f ]

When utilizing End to End delay mechanism, the following error messages show up:

|root@ehl1:~# ptp4l --tx_timestamp_timeout=50 -H -i eno2 -E -m
|ptp4l[950.573]: selected /dev/ptp3 as PTP clock
|ptp4l[950.586]: port 1: INITIALIZING to LISTENING on INIT_COMPLETE
|ptp4l[950.586]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE
|ptp4l[952.879]: port 1: new foreign master 001395.fffe.4897b4-1
|ptp4l[956.879]: selected best master clock 001395.fffe.4897b4
|ptp4l[956.879]: port 1: assuming the grand master role
|ptp4l[956.879]: port 1: LISTENING to GRAND_MASTER on RS_GRAND_MASTER
|ptp4l[962.017]: port 1: received DELAY_REQ without timestamp
|ptp4l[962.273]: port 1: received DELAY_REQ without timestamp
|ptp4l[963.090]: port 1: received DELAY_REQ without timestamp

Commit f2fb6b6275eb ("net: stmmac: enable timestamp snapshot for required PTP
packets in dwmac v5.10a") already addresses this problem for the dwmac
v5.10. However, same holds true for all dwmacs above version v4.10. Correct the
check accordingly. Afterwards everything works as expected.

Tested on Intel Atom(R) x6414RE Processor.

Fixes: 14f347334bf2 ("net: stmmac: Correctly take timestamp for PTPv2")
Fixes: f2fb6b6275eb ("net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10a")
Suggested-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 6133b2fe8a78..0ac61e7ab43c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -605,7 +605,7 @@ static int stmmac_hwtstamp_set(struct net_device *dev, struct ifreq *ifr)
 			config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
 			ptp_v2 = PTP_TCR_TSVER2ENA;
 			snap_type_sel = PTP_TCR_SNAPTYPSEL_1;
-			if (priv->synopsys_id != DWMAC_CORE_5_10)
+			if (priv->synopsys_id < DWMAC_CORE_4_10)
 				ts_event_en = PTP_TCR_TSEVNTENA;
 			ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
 			ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
-- 
2.33.0

[PATCH 5.10 30/95] e1000e: Fix packet loss on Tiger Lake and later

[Greg Kroah-Hartman]

From: Sasha Neftin <sasha.neftin@intel.com>

[ Upstream commit 639e298f432fb058a9496ea16863f53b1ce935fe ]

Update the HW MAC initialization flow. Do not gate DMA clock from
the modPHY block. Keeping this clock will prevent dropped packets
sent in burst mode on the Kumeran interface.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213651
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213377
Fixes: fb776f5d57ee ("e1000e: Add support for Tiger Lake")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Mark Pearson <markpearson@lenovo.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e1000e/ich8lan.c | 11 ++++++++++-
 drivers/net/ethernet/intel/e1000e/ich8lan.h |  3 +++
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 854c585de2e1..3cbb8d1ed67f 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -4811,7 +4811,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
 {
 	struct e1000_mac_info *mac = &hw->mac;
-	u32 ctrl_ext, txdctl, snoop;
+	u32 ctrl_ext, txdctl, snoop, fflt_dbg;
 	s32 ret_val;
 	u16 i;
 
@@ -4870,6 +4870,15 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
 		snoop = (u32)~(PCIE_NO_SNOOP_ALL);
 	e1000e_set_pcie_no_snoop(hw, snoop);
 
+	/* Enable workaround for packet loss issue on TGP PCH
+	 * Do not gate DMA clock from the modPHY block
+	 */
+	if (mac->type >= e1000_pch_tgp) {
+		fflt_dbg = er32(FFLT_DBG);
+		fflt_dbg |= E1000_FFLT_DBG_DONT_GATE_WAKE_DMA_CLK;
+		ew32(FFLT_DBG, fflt_dbg);
+	}
+
 	ctrl_ext = er32(CTRL_EXT);
 	ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
 	ew32(CTRL_EXT, ctrl_ext);
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h
index e757896287eb..8f2a8f4ce0ee 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.h
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h
@@ -286,6 +286,9 @@
 /* Proprietary Latency Tolerance Reporting PCI Capability */
 #define E1000_PCI_LTR_CAP_LPT		0xA8
 
+/* Don't gate wake DMA clock */
+#define E1000_FFLT_DBG_DONT_GATE_WAKE_DMA_CLK	0x1000
+
 void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw);
 void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
 						  bool state);
-- 
2.33.0

[PATCH 5.10 31/95] ice: Add missing E810 device ids

[Greg Kroah-Hartman]

From: Tony Nguyen <anthony.l.nguyen@intel.com>

[ Upstream commit 7dcf78b870be6418d72bb1c4d4924bf0f5ca5052 ]

As part of support for E810 XXV devices, some device ids were
inadvertently left out. Add those missing ids.

Fixes: 195fb97766da ("ice: add additional E810 device id")
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_common.c | 2 ++
 drivers/net/ethernet/intel/ice/ice_devids.h | 4 ++++
 drivers/net/ethernet/intel/ice/ice_main.c   | 2 ++
 3 files changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index 2239a5f45e5a..64714757bd4f 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -24,6 +24,8 @@ static enum ice_status ice_set_mac_type(struct ice_hw *hw)
 	case ICE_DEV_ID_E810C_BACKPLANE:
 	case ICE_DEV_ID_E810C_QSFP:
 	case ICE_DEV_ID_E810C_SFP:
+	case ICE_DEV_ID_E810_XXV_BACKPLANE:
+	case ICE_DEV_ID_E810_XXV_QSFP:
 	case ICE_DEV_ID_E810_XXV_SFP:
 		hw->mac_type = ICE_MAC_E810;
 		break;
diff --git a/drivers/net/ethernet/intel/ice/ice_devids.h b/drivers/net/ethernet/intel/ice/ice_devids.h
index 9d8194671f6a..ef4392e6e244 100644
--- a/drivers/net/ethernet/intel/ice/ice_devids.h
+++ b/drivers/net/ethernet/intel/ice/ice_devids.h
@@ -21,6 +21,10 @@
 #define ICE_DEV_ID_E810C_QSFP		0x1592
 /* Intel(R) Ethernet Controller E810-C for SFP */
 #define ICE_DEV_ID_E810C_SFP		0x1593
+/* Intel(R) Ethernet Controller E810-XXV for backplane */
+#define ICE_DEV_ID_E810_XXV_BACKPLANE	0x1599
+/* Intel(R) Ethernet Controller E810-XXV for QSFP */
+#define ICE_DEV_ID_E810_XXV_QSFP	0x159A
 /* Intel(R) Ethernet Controller E810-XXV for SFP */
 #define ICE_DEV_ID_E810_XXV_SFP		0x159B
 /* Intel(R) Ethernet Connection E823-C for backplane */
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 5d0dc1f811e0..66d92a0cfef3 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -4773,6 +4773,8 @@ static const struct pci_device_id ice_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, ICE_DEV_ID_E810C_BACKPLANE), 0 },
 	{ PCI_VDEVICE(INTEL, ICE_DEV_ID_E810C_QSFP), 0 },
 	{ PCI_VDEVICE(INTEL, ICE_DEV_ID_E810C_SFP), 0 },
+	{ PCI_VDEVICE(INTEL, ICE_DEV_ID_E810_XXV_BACKPLANE), 0 },
+	{ PCI_VDEVICE(INTEL, ICE_DEV_ID_E810_XXV_QSFP), 0 },
 	{ PCI_VDEVICE(INTEL, ICE_DEV_ID_E810_XXV_SFP), 0 },
 	{ PCI_VDEVICE(INTEL, ICE_DEV_ID_E823C_BACKPLANE), 0 },
 	{ PCI_VDEVICE(INTEL, ICE_DEV_ID_E823C_QSFP), 0 },
-- 
2.33.0

[PATCH 5.10 32/95] drm/panel: ilitek-ili9881c: Fix sync for Feixin K101-IM2BYL02 panel

[Greg Kroah-Hartman]

From: Dan Johansen <strit@manjaro.org>

[ Upstream commit 772970620a839141835eaf2bc507d957b10adcca ]

This adjusts sync values according to the datasheet

Fixes: 1c243751c095 ("drm/panel: ilitek-ili9881c: add support for Feixin K101-IM2BYL02 panel")
Co-developed-by: Marius Gripsgard <marius@ubports.com>
Signed-off-by: Dan Johansen <strit@manjaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210818214818.298089-1-strit@manjaro.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-ilitek-ili9881c.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
index 0145129d7c66..534dd7414d42 100644
--- a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
+++ b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
@@ -590,14 +590,14 @@ static const struct drm_display_mode k101_im2byl02_default_mode = {
 	.clock		= 69700,
 
 	.hdisplay	= 800,
-	.hsync_start	= 800 + 6,
-	.hsync_end	= 800 + 6 + 15,
-	.htotal		= 800 + 6 + 15 + 16,
+	.hsync_start	= 800 + 52,
+	.hsync_end	= 800 + 52 + 8,
+	.htotal		= 800 + 52 + 8 + 48,
 
 	.vdisplay	= 1280,
-	.vsync_start	= 1280 + 8,
-	.vsync_end	= 1280 + 8 + 48,
-	.vtotal		= 1280 + 8 + 48 + 52,
+	.vsync_start	= 1280 + 16,
+	.vsync_end	= 1280 + 16 + 6,
+	.vtotal		= 1280 + 16 + 6 + 15,
 
 	.width_mm	= 135,
 	.height_mm	= 217,
-- 
2.33.0

[PATCH 5.10 33/95] net: enetc: fix ethtool counter name for PM0_TERR

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit fb8dc5fc8cbdfd62ecd16493848aee2f42ed84d9 ]

There are two counters named "MAC tx frames", one of them is actually
incorrect. The correct name for that counter should be "MAC tx error
frames", which is symmetric to the existing "MAC rx error frames".

Fixes: 16eb4c85c964 ("enetc: Add ethtool statistics")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: <Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20211020165206.1069889-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/enetc/enetc_ethtool.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
index 89e558135432..9c1690f64a02 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
@@ -157,7 +157,7 @@ static const struct {
 	{ ENETC_PM0_TFRM,   "MAC tx frames" },
 	{ ENETC_PM0_TFCS,   "MAC tx fcs errors" },
 	{ ENETC_PM0_TVLAN,  "MAC tx VLAN frames" },
-	{ ENETC_PM0_TERR,   "MAC tx frames" },
+	{ ENETC_PM0_TERR,   "MAC tx frame errors" },
 	{ ENETC_PM0_TUCA,   "MAC tx unicast frames" },
 	{ ENETC_PM0_TMCA,   "MAC tx multicast frames" },
 	{ ENETC_PM0_TBCA,   "MAC tx broadcast frames" },
-- 
2.33.0

[PATCH 5.10 34/95] can: rcar_can: fix suspend/resume

[Greg Kroah-Hartman]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

commit f7c05c3987dcfde9a4e8c2d533db013fabebca0d upstream.

If the driver was not opened, rcar_can_suspend() should not call
clk_disable() because the clock was not enabled.

Fixes: fd1159318e55 ("can: add Renesas R-Car CAN driver")
Link: https://lore.kernel.org/all/20210924075556.223685-1-yoshihiro.shimoda.uh@renesas.com
Cc: stable@vger.kernel.org
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Ayumi Nakamichi <ayumi.nakamichi.kf@renesas.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/can/rcar/rcar_can.c |   20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

--- a/drivers/net/can/rcar/rcar_can.c
+++ b/drivers/net/can/rcar/rcar_can.c
@@ -846,10 +846,12 @@ static int __maybe_unused rcar_can_suspe
 	struct rcar_can_priv *priv = netdev_priv(ndev);
 	u16 ctlr;
 
-	if (netif_running(ndev)) {
-		netif_stop_queue(ndev);
-		netif_device_detach(ndev);
-	}
+	if (!netif_running(ndev))
+		return 0;
+
+	netif_stop_queue(ndev);
+	netif_device_detach(ndev);
+
 	ctlr = readw(&priv->regs->ctlr);
 	ctlr |= RCAR_CAN_CTLR_CANM_HALT;
 	writew(ctlr, &priv->regs->ctlr);
@@ -868,6 +870,9 @@ static int __maybe_unused rcar_can_resum
 	u16 ctlr;
 	int err;
 
+	if (!netif_running(ndev))
+		return 0;
+
 	err = clk_enable(priv->clk);
 	if (err) {
 		netdev_err(ndev, "clk_enable() failed, error %d\n", err);
@@ -881,10 +886,9 @@ static int __maybe_unused rcar_can_resum
 	writew(ctlr, &priv->regs->ctlr);
 	priv->can.state = CAN_STATE_ERROR_ACTIVE;
 
-	if (netif_running(ndev)) {
-		netif_device_attach(ndev);
-		netif_start_queue(ndev);
-	}
+	netif_device_attach(ndev);
+	netif_start_queue(ndev);
+
 	return 0;
 }
 

[PATCH 5.10 35/95] can: peak_usb: pcan_usb_fd_decode_status(): fix back to ERROR_ACTIVE state notification

[Greg Kroah-Hartman]

From: Stephane Grosjean <s.grosjean@peak-system.com>

commit 3d031abc7e7249573148871180c28ecedb5e27df upstream.

This corrects the lack of notification of a return to ERROR_ACTIVE
state for USB - CANFD devices from PEAK-System.

Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters")
Link: https://lore.kernel.org/all/20210929142111.55757-1-s.grosjean@peak-system.com
Cc: stable@vger.kernel.org
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/can/usb/peak_usb/pcan_usb_fd.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c
@@ -551,11 +551,10 @@ static int pcan_usb_fd_decode_status(str
 	} else if (sm->channel_p_w_b & PUCAN_BUS_WARNING) {
 		new_state = CAN_STATE_ERROR_WARNING;
 	} else {
-		/* no error bit (so, no error skb, back to active state) */
-		dev->can.state = CAN_STATE_ERROR_ACTIVE;
+		/* back to (or still in) ERROR_ACTIVE state */
+		new_state = CAN_STATE_ERROR_ACTIVE;
 		pdev->bec.txerr = 0;
 		pdev->bec.rxerr = 0;
-		return 0;
 	}
 
 	/* state hasn't changed */

[PATCH 5.10 36/95] can: peak_pci: peak_pci_remove(): fix UAF

[Greg Kroah-Hartman]

From: Zheyu Ma <zheyuma97@gmail.com>

commit 949fe9b35570361bc6ee2652f89a0561b26eec98 upstream.

When remove the module peek_pci, referencing 'chan' again after
releasing 'dev' will cause UAF.

Fix this by releasing 'dev' later.

The following log reveals it:

[   35.961814 ] BUG: KASAN: use-after-free in peak_pci_remove+0x16f/0x270 [peak_pci]
[   35.963414 ] Read of size 8 at addr ffff888136998ee8 by task modprobe/5537
[   35.965513 ] Call Trace:
[   35.965718 ]  dump_stack_lvl+0xa8/0xd1
[   35.966028 ]  print_address_description+0x87/0x3b0
[   35.966420 ]  kasan_report+0x172/0x1c0
[   35.966725 ]  ? peak_pci_remove+0x16f/0x270 [peak_pci]
[   35.967137 ]  ? trace_irq_enable_rcuidle+0x10/0x170
[   35.967529 ]  ? peak_pci_remove+0x16f/0x270 [peak_pci]
[   35.967945 ]  __asan_report_load8_noabort+0x14/0x20
[   35.968346 ]  peak_pci_remove+0x16f/0x270 [peak_pci]
[   35.968752 ]  pci_device_remove+0xa9/0x250

Fixes: e6d9c80b7ca1 ("can: peak_pci: add support of some new PEAK-System PCI cards")
Link: https://lore.kernel.org/all/1634192913-15639-1-git-send-email-zheyuma97@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/can/sja1000/peak_pci.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

--- a/drivers/net/can/sja1000/peak_pci.c
+++ b/drivers/net/can/sja1000/peak_pci.c
@@ -731,16 +731,15 @@ static void peak_pci_remove(struct pci_d
 		struct net_device *prev_dev = chan->prev_dev;
 
 		dev_info(&pdev->dev, "removing device %s\n", dev->name);
+		/* do that only for first channel */
+		if (!prev_dev && chan->pciec_card)
+			peak_pciec_remove(chan->pciec_card);
 		unregister_sja1000dev(dev);
 		free_sja1000dev(dev);
 		dev = prev_dev;
 
-		if (!dev) {
-			/* do that only for first channel */
-			if (chan->pciec_card)
-				peak_pciec_remove(chan->pciec_card);
+		if (!dev)
 			break;
-		}
 		priv = netdev_priv(dev);
 		chan = priv->priv;
 	}

[PATCH 5.10 37/95] can: isotp: isotp_sendmsg(): fix return error on FC timeout on TX path

[Greg Kroah-Hartman]

From: Marc Kleine-Budde <mkl@pengutronix.de>

commit d674a8f123b4096d85955c7eaabec688f29724c9 upstream.

When the a large chunk of data send and the receiver does not send a
Flow Control frame back in time, the sendmsg() does not return a error
code, but the number of bytes sent corresponding to the size of the
packet.

If a timeout occurs the isotp_tx_timer_handler() is fired, sets
sk->sk_err and calls the sk->sk_error_report() function. It was
wrongly expected that the error would be propagated to user space in
every case. For isotp_sendmsg() blocking on wait_event_interruptible()
this is not the case.

This patch fixes the problem by checking if sk->sk_err is set and
returning the error to user space.

Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://github.com/hartkopp/can-isotp/issues/42
Link: https://github.com/hartkopp/can-isotp/pull/43
Link: https://lore.kernel.org/all/20210507091839.1366379-1-mkl@pengutronix.de
Cc: stable@vger.kernel.org
Reported-by: Sottas Guillaume (LMB) <Guillaume.Sottas@liebherr.com>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/can/isotp.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -953,6 +953,9 @@ static int isotp_sendmsg(struct socket *
 	if (wait_tx_done) {
 		/* wait for complete transmission of current pdu */
 		wait_event_interruptible(so->wait, so->tx.state == ISOTP_IDLE);
+
+		if (sk->sk_err)
+			return -sk->sk_err;
 	}
 
 	return size;

[PATCH 5.10 38/95] can: isotp: isotp_sendmsg(): add result check for wait_event_interruptible()

[Greg Kroah-Hartman]

From: Ziyang Xuan <william.xuanziyang@huawei.com>

commit 9acf636215a6ce9362fe618e7da4913b8bfe84c8 upstream.

Using wait_event_interruptible() to wait for complete transmission,
but do not check the result of wait_event_interruptible() which can be
interrupted. It will result in TX buffer has multiple accessors and
the later process interferes with the previous process.

Following is one of the problems reported by syzbot.

=============================================================
WARNING: CPU: 0 PID: 0 at net/can/isotp.c:840 isotp_tx_timer_handler+0x2e0/0x4c0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc7+ #68
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
RIP: 0010:isotp_tx_timer_handler+0x2e0/0x4c0
Call Trace:
 <IRQ>
 ? isotp_setsockopt+0x390/0x390
 __hrtimer_run_queues+0xb8/0x610
 hrtimer_run_softirq+0x91/0xd0
 ? rcu_read_lock_sched_held+0x4d/0x80
 __do_softirq+0xe8/0x553
 irq_exit_rcu+0xf8/0x100
 sysvec_apic_timer_interrupt+0x9e/0xc0
 </IRQ>
 asm_sysvec_apic_timer_interrupt+0x12/0x20

Add result check for wait_event_interruptible() in isotp_sendmsg()
to avoid multiple accessers for tx buffer.

Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/all/10ca695732c9dd267c76a3c30f37aefe1ff7e32f.1633764159.git.william.xuanziyang@huawei.com
Cc: stable@vger.kernel.org
Reported-by: syzbot+78bab6958a614b0c80b9@syzkaller.appspotmail.com
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/can/isotp.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -863,7 +863,9 @@ static int isotp_sendmsg(struct socket *
 			return -EAGAIN;
 
 		/* wait for complete transmission of current pdu */
-		wait_event_interruptible(so->wait, so->tx.state == ISOTP_IDLE);
+		err = wait_event_interruptible(so->wait, so->tx.state == ISOTP_IDLE);
+		if (err)
+			return err;
 	}
 
 	if (!size || size > MAX_MSG_LENGTH)

[PATCH 5.10 39/95] can: j1939: j1939_tp_rxtimer(): fix errant alert in j1939_tp_rxtimer

[Greg Kroah-Hartman]

From: Ziyang Xuan <william.xuanziyang@huawei.com>

commit b504a884f6b5a77dac7d580ffa08e482f70d1a30 upstream.

When the session state is J1939_SESSION_DONE, j1939_tp_rxtimer() will
give an alert "rx timeout, send abort", but do nothing actually. Move
the alert into session active judgment condition, it is more
reasonable.

One of the scenarios is that j1939_tp_rxtimer() execute followed by
j1939_xtp_rx_abort_one(). After j1939_xtp_rx_abort_one(), the session
state is J1939_SESSION_DONE, then j1939_tp_rxtimer() give an alert.

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/all/20210906094219.95924-1-william.xuanziyang@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/can/j1939/transport.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -1230,12 +1230,11 @@ static enum hrtimer_restart j1939_tp_rxt
 		session->err = -ETIME;
 		j1939_session_deactivate(session);
 	} else {
-		netdev_alert(priv->ndev, "%s: 0x%p: rx timeout, send abort\n",
-			     __func__, session);
-
 		j1939_session_list_lock(session->priv);
 		if (session->state >= J1939_SESSION_ACTIVE &&
 		    session->state < J1939_SESSION_ACTIVE_MAX) {
+			netdev_alert(priv->ndev, "%s: 0x%p: rx timeout, send abort\n",
+				     __func__, session);
 			j1939_session_get(session);
 			hrtimer_start(&session->rxtimer,
 				      ms_to_ktime(J1939_XTP_ABORT_TIMEOUT_MS),

[PATCH 5.10 40/95] can: j1939: j1939_netdev_start(): fix UAF for rx_kref of j1939_priv

[Greg Kroah-Hartman]

From: Ziyang Xuan <william.xuanziyang@huawei.com>

commit d9d52a3ebd284882f5562c88e55991add5d01586 upstream.

It will trigger UAF for rx_kref of j1939_priv as following.

        cpu0                                    cpu1
j1939_sk_bind(socket0, ndev0, ...)
j1939_netdev_start
                                        j1939_sk_bind(socket1, ndev0, ...)
                                        j1939_netdev_start
j1939_priv_set
                                        j1939_priv_get_by_ndev_locked
j1939_jsk_add
.....
j1939_netdev_stop
kref_put_lock(&priv->rx_kref, ...)
                                        kref_get(&priv->rx_kref, ...)
                                        REFCOUNT_WARN("addition on 0;...")

====================================================
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 1 PID: 20874 at lib/refcount.c:25 refcount_warn_saturate+0x169/0x1e0
RIP: 0010:refcount_warn_saturate+0x169/0x1e0
Call Trace:
 j1939_netdev_start+0x68b/0x920
 j1939_sk_bind+0x426/0xeb0
 ? security_socket_bind+0x83/0xb0

The rx_kref's kref_get() and kref_put() should use j1939_netdev_lock to
protect.

Fixes: 9d71dd0c70099 ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/all/20210926104757.2021540-1-william.xuanziyang@huawei.com
Cc: stable@vger.kernel.org
Reported-by: syzbot+85d9878b19c94f9019ad@syzkaller.appspotmail.com
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/can/j1939/main.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/net/can/j1939/main.c
+++ b/net/can/j1939/main.c
@@ -249,11 +249,14 @@ struct j1939_priv *j1939_netdev_start(st
 	struct j1939_priv *priv, *priv_new;
 	int ret;
 
-	priv = j1939_priv_get_by_ndev(ndev);
+	spin_lock(&j1939_netdev_lock);
+	priv = j1939_priv_get_by_ndev_locked(ndev);
 	if (priv) {
 		kref_get(&priv->rx_kref);
+		spin_unlock(&j1939_netdev_lock);
 		return priv;
 	}
+	spin_unlock(&j1939_netdev_lock);
 
 	priv = j1939_priv_create(ndev);
 	if (!priv)
@@ -269,10 +272,10 @@ struct j1939_priv *j1939_netdev_start(st
 		/* Someone was faster than us, use their priv and roll
 		 * back our's.
 		 */
+		kref_get(&priv_new->rx_kref);
 		spin_unlock(&j1939_netdev_lock);
 		dev_put(ndev);
 		kfree(priv);
-		kref_get(&priv_new->rx_kref);
 		return priv_new;
 	}
 	j1939_priv_set(ndev, priv);

[PATCH 5.10 41/95] can: j1939: j1939_xtp_rx_dat_one(): cancel session if receive TP.DT with error length

[Greg Kroah-Hartman]

From: Zhang Changzhong <zhangchangzhong@huawei.com>

commit 379743985ab6cfe2cbd32067cf4ed497baca6d06 upstream.

According to SAE-J1939-21, the data length of TP.DT must be 8 bytes, so
cancel session when receive unexpected TP.DT message.

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/all/1632972800-45091-1-git-send-email-zhangchangzhong@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/can/j1939/transport.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -1770,6 +1770,7 @@ static void j1939_xtp_rx_dpo(struct j193
 static void j1939_xtp_rx_dat_one(struct j1939_session *session,
 				 struct sk_buff *skb)
 {
+	enum j1939_xtp_abort abort = J1939_XTP_ABORT_FAULT;
 	struct j1939_priv *priv = session->priv;
 	struct j1939_sk_buff_cb *skcb;
 	struct sk_buff *se_skb = NULL;
@@ -1784,9 +1785,11 @@ static void j1939_xtp_rx_dat_one(struct
 
 	skcb = j1939_skb_to_cb(skb);
 	dat = skb->data;
-	if (skb->len <= 1)
+	if (skb->len != 8) {
 		/* makes no sense */
+		abort = J1939_XTP_ABORT_UNEXPECTED_DATA;
 		goto out_session_cancel;
+	}
 
 	switch (session->last_cmd) {
 	case 0xff:
@@ -1884,7 +1887,7 @@ static void j1939_xtp_rx_dat_one(struct
  out_session_cancel:
 	kfree_skb(se_skb);
 	j1939_session_timers_cancel(session);
-	j1939_session_cancel(session, J1939_XTP_ABORT_FAULT);
+	j1939_session_cancel(session, abort);
 	j1939_session_put(session);
 }
 

[PATCH 5.10 42/95] can: j1939: j1939_xtp_rx_rts_session_new(): abort TP less than 9 bytes

[Greg Kroah-Hartman]

From: Zhang Changzhong <zhangchangzhong@huawei.com>

commit a4fbe70c5cb746441d56b28cf88161d9e0e25378 upstream.

The receiver should abort TP if 'total message size' in TP.CM_RTS and
TP.CM_BAM is less than 9 or greater than 1785 [1], but currently the
j1939 stack only checks the upper bound and the receiver will accept
the following broadcast message:

  vcan1  18ECFF00   [8]  20 08 00 02 FF 00 23 01
  vcan1  18EBFF00   [8]  01 00 00 00 00 00 00 00
  vcan1  18EBFF00   [8]  02 00 FF FF FF FF FF FF

This patch adds check for the lower bound and abort illegal TP.

[1] SAE-J1939-82 A.3.4 Row 2 and A.3.6 Row 6.

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/all/1634203601-3460-1-git-send-email-zhangchangzhong@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/can/j1939/j1939-priv.h |    1 +
 net/can/j1939/transport.c  |    2 ++
 2 files changed, 3 insertions(+)

--- a/net/can/j1939/j1939-priv.h
+++ b/net/can/j1939/j1939-priv.h
@@ -326,6 +326,7 @@ int j1939_session_activate(struct j1939_
 void j1939_tp_schedule_txtimer(struct j1939_session *session, int msec);
 void j1939_session_timers_cancel(struct j1939_session *session);
 
+#define J1939_MIN_TP_PACKET_SIZE 9
 #define J1939_MAX_TP_PACKET_SIZE (7 * 0xff)
 #define J1939_MAX_ETP_PACKET_SIZE (7 * 0x00ffffff)
 
--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -1596,6 +1596,8 @@ j1939_session *j1939_xtp_rx_rts_session_
 			abort = J1939_XTP_ABORT_FAULT;
 		else if (len > priv->tp_max_packet_size)
 			abort = J1939_XTP_ABORT_RESOURCE;
+		else if (len < J1939_MIN_TP_PACKET_SIZE)
+			abort = J1939_XTP_ABORT_FAULT;
 	}
 
 	if (abort != J1939_XTP_NO_ABORT) {

[PATCH 5.10 43/95] ceph: skip existing superblocks that are blocklisted or shut down when mounting

[Greg Kroah-Hartman]

From: Jeff Layton <jlayton@kernel.org>

commit 98d0a6fb7303a6f4a120b8b8ed05b86ff5db53e8 upstream.

Currently when mounting, we may end up finding an existing superblock
that corresponds to a blocklisted MDS client. This means that the new
mount ends up being unusable.

If we've found an existing superblock with a client that is already
blocklisted, and the client is not configured to recover on its own,
fail the match. Ditto if the superblock has been forcibly unmounted.

While we're in here, also rename "other" to the more conventional "fsc".

Cc: stable@vger.kernel.org
URL: https://bugzilla.redhat.com/show_bug.cgi?id=1901499
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ceph/super.c |   17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

--- a/fs/ceph/super.c
+++ b/fs/ceph/super.c
@@ -997,16 +997,16 @@ static int ceph_compare_super(struct sup
 	struct ceph_fs_client *new = fc->s_fs_info;
 	struct ceph_mount_options *fsopt = new->mount_options;
 	struct ceph_options *opt = new->client->options;
-	struct ceph_fs_client *other = ceph_sb_to_client(sb);
+	struct ceph_fs_client *fsc = ceph_sb_to_client(sb);
 
 	dout("ceph_compare_super %p\n", sb);
 
-	if (compare_mount_options(fsopt, opt, other)) {
+	if (compare_mount_options(fsopt, opt, fsc)) {
 		dout("monitor(s)/mount options don't match\n");
 		return 0;
 	}
 	if ((opt->flags & CEPH_OPT_FSID) &&
-	    ceph_fsid_compare(&opt->fsid, &other->client->fsid)) {
+	    ceph_fsid_compare(&opt->fsid, &fsc->client->fsid)) {
 		dout("fsid doesn't match\n");
 		return 0;
 	}
@@ -1014,6 +1014,17 @@ static int ceph_compare_super(struct sup
 		dout("flags differ\n");
 		return 0;
 	}
+
+	if (fsc->blocklisted && !ceph_test_mount_opt(fsc, CLEANRECOVER)) {
+		dout("client is blocklisted (and CLEANRECOVER is not set)\n");
+		return 0;
+	}
+
+	if (fsc->mount_state == CEPH_MOUNT_SHUTDOWN) {
+		dout("client has been forcibly unmounted\n");
+		return 0;
+	}
+
 	return 1;
 }
 

[PATCH 5.10 44/95] ceph: fix handling of "meta" errors

[Greg Kroah-Hartman]

From: Jeff Layton <jlayton@kernel.org>

commit 1bd85aa65d0e7b5e4d09240f492f37c569fdd431 upstream.

Currently, we check the wb_err too early for directories, before all of
the unsafe child requests have been waited on. In order to fix that we
need to check the mapping->wb_err later nearer to the end of ceph_fsync.

We also have an overly-complex method for tracking errors after
blocklisting. The errors recorded in cleanup_session_requests go to a
completely separate field in the inode, but we end up reporting them the
same way we would for any other error (in fsync).

There's no real benefit to tracking these errors in two different
places, since the only reporting mechanism for them is in fsync, and
we'd need to advance them both every time.

Given that, we can just remove i_meta_err, and convert the places that
used it to instead just use mapping->wb_err instead. That also fixes
the original problem by ensuring that we do a check_and_advance of the
wb_err at the end of the fsync op.

Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/52864
Reported-by: Patrick Donnelly <pdonnell@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ceph/caps.c       |   12 +++---------
 fs/ceph/file.c       |    1 -
 fs/ceph/inode.c      |    2 --
 fs/ceph/mds_client.c |   17 +++++------------
 fs/ceph/super.h      |    3 ---
 5 files changed, 8 insertions(+), 27 deletions(-)

--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -2334,7 +2334,6 @@ static int unsafe_request_wait(struct in
 
 int ceph_fsync(struct file *file, loff_t start, loff_t end, int datasync)
 {
-	struct ceph_file_info *fi = file->private_data;
 	struct inode *inode = file->f_mapping->host;
 	struct ceph_inode_info *ci = ceph_inode(inode);
 	u64 flush_tid;
@@ -2369,14 +2368,9 @@ int ceph_fsync(struct file *file, loff_t
 	if (err < 0)
 		ret = err;
 
-	if (errseq_check(&ci->i_meta_err, READ_ONCE(fi->meta_err))) {
-		spin_lock(&file->f_lock);
-		err = errseq_check_and_advance(&ci->i_meta_err,
-					       &fi->meta_err);
-		spin_unlock(&file->f_lock);
-		if (err < 0)
-			ret = err;
-	}
+	err = file_check_and_advance_wb_err(file);
+	if (err < 0)
+		ret = err;
 out:
 	dout("fsync %p%s result=%d\n", inode, datasync ? " datasync" : "", ret);
 	return ret;
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -233,7 +233,6 @@ static int ceph_init_file_info(struct in
 
 	spin_lock_init(&fi->rw_contexts_lock);
 	INIT_LIST_HEAD(&fi->rw_contexts);
-	fi->meta_err = errseq_sample(&ci->i_meta_err);
 	fi->filp_gen = READ_ONCE(ceph_inode_to_client(inode)->filp_gen);
 
 	return 0;
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -529,8 +529,6 @@ struct inode *ceph_alloc_inode(struct su
 
 	ceph_fscache_inode_init(ci);
 
-	ci->i_meta_err = 0;
-
 	return &ci->vfs_inode;
 }
 
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -1481,7 +1481,6 @@ static void cleanup_session_requests(str
 {
 	struct ceph_mds_request *req;
 	struct rb_node *p;
-	struct ceph_inode_info *ci;
 
 	dout("cleanup_session_requests mds%d\n", session->s_mds);
 	mutex_lock(&mdsc->mutex);
@@ -1490,16 +1489,10 @@ static void cleanup_session_requests(str
 				       struct ceph_mds_request, r_unsafe_item);
 		pr_warn_ratelimited(" dropping unsafe request %llu\n",
 				    req->r_tid);
-		if (req->r_target_inode) {
-			/* dropping unsafe change of inode's attributes */
-			ci = ceph_inode(req->r_target_inode);
-			errseq_set(&ci->i_meta_err, -EIO);
-		}
-		if (req->r_unsafe_dir) {
-			/* dropping unsafe directory operation */
-			ci = ceph_inode(req->r_unsafe_dir);
-			errseq_set(&ci->i_meta_err, -EIO);
-		}
+		if (req->r_target_inode)
+			mapping_set_error(req->r_target_inode->i_mapping, -EIO);
+		if (req->r_unsafe_dir)
+			mapping_set_error(req->r_unsafe_dir->i_mapping, -EIO);
 		__unregister_request(mdsc, req);
 	}
 	/* zero r_attempts, so kick_requests() will re-send requests */
@@ -1668,7 +1661,7 @@ static int remove_session_caps_cb(struct
 		spin_unlock(&mdsc->cap_dirty_lock);
 
 		if (dirty_dropped) {
-			errseq_set(&ci->i_meta_err, -EIO);
+			mapping_set_error(inode->i_mapping, -EIO);
 
 			if (ci->i_wrbuffer_ref_head == 0 &&
 			    ci->i_wr_ref == 0 &&
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -430,8 +430,6 @@ struct ceph_inode_info {
 	struct fscache_cookie *fscache;
 	u32 i_fscache_gen;
 #endif
-	errseq_t i_meta_err;
-
 	struct inode vfs_inode; /* at end */
 };
 
@@ -773,7 +771,6 @@ struct ceph_file_info {
 	spinlock_t rw_contexts_lock;
 	struct list_head rw_contexts;
 
-	errseq_t meta_err;
 	u32 filp_gen;
 	atomic_t num_locks;
 };

[PATCH 5.10 45/95] ocfs2: fix data corruption after conversion from inline format

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

commit 5314454ea3ff6fc746eaf71b9a7ceebed52888fa upstream.

Commit 6dbf7bb55598 ("fs: Don't invalidate page buffers in
block_write_full_page()") uncovered a latent bug in ocfs2 conversion
from inline inode format to a normal inode format.

The code in ocfs2_convert_inline_data_to_extents() attempts to zero out
the whole cluster allocated for file data by grabbing, zeroing, and
dirtying all pages covering this cluster.  However these pages are
beyond i_size, thus writeback code generally ignores these dirty pages
and no blocks were ever actually zeroed on the disk.

This oversight was fixed by commit 693c241a5f6a ("ocfs2: No need to zero
pages past i_size.") for standard ocfs2 write path, inline conversion
path was apparently forgotten; the commit log also has a reasoning why
the zeroing actually is not needed.

After commit 6dbf7bb55598, things became worse as writeback code stopped
invalidating buffers on pages beyond i_size and thus these pages end up
with clean PageDirty bit but with buffers attached to these pages being
still dirty.  So when a file is converted from inline format, then
writeback triggers, and then the file is grown so that these pages
become valid, the invalid dirtiness state is preserved,
mark_buffer_dirty() does nothing on these pages (buffers are already
dirty) but page is never written back because it is clean.  So data
written to these pages is lost once pages are reclaimed.

Simple reproducer for the problem is:

  xfs_io -f -c "pwrite 0 2000" -c "pwrite 2000 2000" -c "fsync" \
    -c "pwrite 4000 2000" ocfs2_file

After unmounting and mounting the fs again, you can observe that end of
'ocfs2_file' has lost its contents.

Fix the problem by not doing the pointless zeroing during conversion
from inline format similarly as in the standard write path.

[akpm@linux-foundation.org: fix whitespace, per Joseph]

Link: https://lkml.kernel.org/r/20210930095405.21433-1-jack@suse.cz
Fixes: 6dbf7bb55598 ("fs: Don't invalidate page buffers in block_write_full_page()")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: "Markov, Andrey" <Markov.Andrey@Dell.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ocfs2/alloc.c |   46 ++++++++++++----------------------------------
 1 file changed, 12 insertions(+), 34 deletions(-)

--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c
@@ -7047,7 +7047,7 @@ void ocfs2_set_inode_data_inline(struct
 int ocfs2_convert_inline_data_to_extents(struct inode *inode,
 					 struct buffer_head *di_bh)
 {
-	int ret, i, has_data, num_pages = 0;
+	int ret, has_data, num_pages = 0;
 	int need_free = 0;
 	u32 bit_off, num;
 	handle_t *handle;
@@ -7056,26 +7056,17 @@ int ocfs2_convert_inline_data_to_extents
 	struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
 	struct ocfs2_dinode *di = (struct ocfs2_dinode *)di_bh->b_data;
 	struct ocfs2_alloc_context *data_ac = NULL;
-	struct page **pages = NULL;
-	loff_t end = osb->s_clustersize;
+	struct page *page = NULL;
 	struct ocfs2_extent_tree et;
 	int did_quota = 0;
 
 	has_data = i_size_read(inode) ? 1 : 0;
 
 	if (has_data) {
-		pages = kcalloc(ocfs2_pages_per_cluster(osb->sb),
-				sizeof(struct page *), GFP_NOFS);
-		if (pages == NULL) {
-			ret = -ENOMEM;
-			mlog_errno(ret);
-			return ret;
-		}
-
 		ret = ocfs2_reserve_clusters(osb, 1, &data_ac);
 		if (ret) {
 			mlog_errno(ret);
-			goto free_pages;
+			goto out;
 		}
 	}
 
@@ -7095,7 +7086,8 @@ int ocfs2_convert_inline_data_to_extents
 	}
 
 	if (has_data) {
-		unsigned int page_end;
+		unsigned int page_end = min_t(unsigned, PAGE_SIZE,
+							osb->s_clustersize);
 		u64 phys;
 
 		ret = dquot_alloc_space_nodirty(inode,
@@ -7119,15 +7111,8 @@ int ocfs2_convert_inline_data_to_extents
 		 */
 		block = phys = ocfs2_clusters_to_blocks(inode->i_sb, bit_off);
 
-		/*
-		 * Non sparse file systems zero on extend, so no need
-		 * to do that now.
-		 */
-		if (!ocfs2_sparse_alloc(osb) &&
-		    PAGE_SIZE < osb->s_clustersize)
-			end = PAGE_SIZE;
-
-		ret = ocfs2_grab_eof_pages(inode, 0, end, pages, &num_pages);
+		ret = ocfs2_grab_eof_pages(inode, 0, page_end, &page,
+					   &num_pages);
 		if (ret) {
 			mlog_errno(ret);
 			need_free = 1;
@@ -7138,20 +7123,15 @@ int ocfs2_convert_inline_data_to_extents
 		 * This should populate the 1st page for us and mark
 		 * it up to date.
 		 */
-		ret = ocfs2_read_inline_data(inode, pages[0], di_bh);
+		ret = ocfs2_read_inline_data(inode, page, di_bh);
 		if (ret) {
 			mlog_errno(ret);
 			need_free = 1;
 			goto out_unlock;
 		}
 
-		page_end = PAGE_SIZE;
-		if (PAGE_SIZE > osb->s_clustersize)
-			page_end = osb->s_clustersize;
-
-		for (i = 0; i < num_pages; i++)
-			ocfs2_map_and_dirty_page(inode, handle, 0, page_end,
-						 pages[i], i > 0, &phys);
+		ocfs2_map_and_dirty_page(inode, handle, 0, page_end, page, 0,
+					 &phys);
 	}
 
 	spin_lock(&oi->ip_lock);
@@ -7182,8 +7162,8 @@ int ocfs2_convert_inline_data_to_extents
 	}
 
 out_unlock:
-	if (pages)
-		ocfs2_unlock_and_free_pages(pages, num_pages);
+	if (page)
+		ocfs2_unlock_and_free_pages(&page, num_pages);
 
 out_commit:
 	if (ret < 0 && did_quota)
@@ -7207,8 +7187,6 @@ out_commit:
 out:
 	if (data_ac)
 		ocfs2_free_alloc_context(data_ac);
-free_pages:
-	kfree(pages);
 	return ret;
 }
 

[PATCH 5.10 46/95] ocfs2: mount fails with buffer overflow in strlen

[Greg Kroah-Hartman]

From: Valentin Vidic <vvidic@valentin-vidic.from.hr>

commit b15fa9224e6e1239414525d8d556d824701849fc upstream.

Starting with kernel 5.11 built with CONFIG_FORTIFY_SOURCE mouting an
ocfs2 filesystem with either o2cb or pcmk cluster stack fails with the
trace below.  Problem seems to be that strings for cluster stack and
cluster name are not guaranteed to be null terminated in the disk
representation, while strlcpy assumes that the source string is always
null terminated.  This causes a read outside of the source string
triggering the buffer overflow detection.

  detected buffer overflow in strlen
  ------------[ cut here ]------------
  kernel BUG at lib/string.c:1149!
  invalid opcode: 0000 [#1] SMP PTI
  CPU: 1 PID: 910 Comm: mount.ocfs2 Not tainted 5.14.0-1-amd64 #1
    Debian 5.14.6-2
  RIP: 0010:fortify_panic+0xf/0x11
  ...
  Call Trace:
   ocfs2_initialize_super.isra.0.cold+0xc/0x18 [ocfs2]
   ocfs2_fill_super+0x359/0x19b0 [ocfs2]
   mount_bdev+0x185/0x1b0
   legacy_get_tree+0x27/0x40
   vfs_get_tree+0x25/0xb0
   path_mount+0x454/0xa20
   __x64_sys_mount+0x103/0x140
   do_syscall_64+0x3b/0xc0
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Link: https://lkml.kernel.org/r/20210929180654.32460-1-vvidic@valentin-vidic.from.hr
Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ocfs2/super.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -2171,11 +2171,17 @@ static int ocfs2_initialize_super(struct
 	}
 
 	if (ocfs2_clusterinfo_valid(osb)) {
+		/*
+		 * ci_stack and ci_cluster in ocfs2_cluster_info may not be null
+		 * terminated, so make sure no overflow happens here by using
+		 * memcpy. Destination strings will always be null terminated
+		 * because osb is allocated using kzalloc.
+		 */
 		osb->osb_stackflags =
 			OCFS2_RAW_SB(di)->s_cluster_info.ci_stackflags;
-		strlcpy(osb->osb_cluster_stack,
+		memcpy(osb->osb_cluster_stack,
 		       OCFS2_RAW_SB(di)->s_cluster_info.ci_stack,
-		       OCFS2_STACK_LABEL_LEN + 1);
+		       OCFS2_STACK_LABEL_LEN);
 		if (strlen(osb->osb_cluster_stack) != OCFS2_STACK_LABEL_LEN) {
 			mlog(ML_ERROR,
 			     "couldn't mount because of an invalid "
@@ -2184,9 +2190,9 @@ static int ocfs2_initialize_super(struct
 			status = -EINVAL;
 			goto bail;
 		}
-		strlcpy(osb->osb_cluster_name,
+		memcpy(osb->osb_cluster_name,
 			OCFS2_RAW_SB(di)->s_cluster_info.ci_cluster,
-			OCFS2_CLUSTER_NAME_LEN + 1);
+			OCFS2_CLUSTER_NAME_LEN);
 	} else {
 		/* The empty string is identical with classic tools that
 		 * don't know about s_cluster_info. */

[PATCH 5.10 47/95] userfaultfd: fix a race between writeprotect and exit_mmap()

[Greg Kroah-Hartman]

From: Nadav Amit <namit@vmware.com>

commit cb185d5f1ebf900f4ae3bf84cee212e6dd035aca upstream.

A race is possible when a process exits, its VMAs are removed by
exit_mmap() and at the same time userfaultfd_writeprotect() is called.

The race was detected by KASAN on a development kernel, but it appears
to be possible on vanilla kernels as well.

Use mmget_not_zero() to prevent the race as done in other userfaultfd
operations.

Link: https://lkml.kernel.org/r/20210921200247.25749-1-namit@vmware.com
Fixes: 63b2d4174c4ad ("userfaultfd: wp: add the writeprotect API to userfaultfd ioctl")
Signed-off-by: Nadav Amit <namit@vmware.com>
Tested-by: Li  Wang <liwang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/userfaultfd.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

--- a/fs/userfaultfd.c
+++ b/fs/userfaultfd.c
@@ -1794,9 +1794,15 @@ static int userfaultfd_writeprotect(stru
 	if (mode_wp && mode_dontwake)
 		return -EINVAL;
 
-	ret = mwriteprotect_range(ctx->mm, uffdio_wp.range.start,
-				  uffdio_wp.range.len, mode_wp,
-				  &ctx->mmap_changing);
+	if (mmget_not_zero(ctx->mm)) {
+		ret = mwriteprotect_range(ctx->mm, uffdio_wp.range.start,
+					  uffdio_wp.range.len, mode_wp,
+					  &ctx->mmap_changing);
+		mmput(ctx->mm);
+	} else {
+		return -ESRCH;
+	}
+
 	if (ret)
 		return ret;
 

[PATCH 5.10 48/95] elfcore: correct reference to CONFIG_UML

[Greg Kroah-Hartman]

From: Lukas Bulwahn <lukas.bulwahn@gmail.com>

commit b0e901280d9860a0a35055f220e8e457f300f40a upstream.

Commit 6e7b64b9dd6d ("elfcore: fix building with clang") introduces
special handling for two architectures, ia64 and User Mode Linux.
However, the wrong name, i.e., CONFIG_UM, for the intended Kconfig
symbol for User-Mode Linux was used.

Although the directory for User Mode Linux is ./arch/um; the Kconfig
symbol for this architecture is called CONFIG_UML.

Luckily, ./scripts/checkkconfigsymbols.py warns on non-existing configs:

  UM
  Referencing files: include/linux/elfcore.h
  Similar symbols: UML, NUMA

Correct the name of the config to the intended one.

[akpm@linux-foundation.org: fix um/x86_64, per Catalin]
  Link: https://lkml.kernel.org/r/20211006181119.2851441-1-catalin.marinas@arm.com
  Link: https://lkml.kernel.org/r/YV6pejGzLy5ppEpt@arm.com

Link: https://lkml.kernel.org/r/20211006082209.417-1-lukas.bulwahn@gmail.com
Fixes: 6e7b64b9dd6d ("elfcore: fix building with clang")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Barret Rhoden <brho@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/elfcore.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/linux/elfcore.h
+++ b/include/linux/elfcore.h
@@ -104,7 +104,7 @@ static inline int elf_core_copy_task_fpr
 #endif
 }
 
-#if defined(CONFIG_UM) || defined(CONFIG_IA64)
+#if (defined(CONFIG_UML) && defined(CONFIG_X86_32)) || defined(CONFIG_IA64)
 /*
  * These functions parameterize elf_core_dump in fs/binfmt_elf.c to write out
  * extra segments containing the gate DSO contents.  Dumping its

[PATCH 5.10 49/95] vfs: check fd has read access in kernel_read_file_from_fd()

[Greg Kroah-Hartman]

From: Matthew Wilcox (Oracle) <willy@infradead.org>

commit 032146cda85566abcd1c4884d9d23e4e30a07e9a upstream.

If we open a file without read access and then pass the fd to a syscall
whose implementation calls kernel_read_file_from_fd(), we get a warning
from __kernel_read():

        if (WARN_ON_ONCE(!(file->f_mode & FMODE_READ)))

This currently affects both finit_module() and kexec_file_load(), but it
could affect other syscalls in the future.

Link: https://lkml.kernel.org/r/20211007220110.600005-1-willy@infradead.org
Fixes: b844f0ecbc56 ("vfs: define kernel_copy_file_from_fd()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Hao Sun <sunhao.th@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/kernel_read_file.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/kernel_read_file.c
+++ b/fs/kernel_read_file.c
@@ -178,7 +178,7 @@ int kernel_read_file_from_fd(int fd, lof
 	struct fd f = fdget(fd);
 	int ret = -EBADF;
 
-	if (!f.file)
+	if (!f.file || !(f.file->f_mode & FMODE_READ))
 		goto out;
 
 	ret = kernel_read_file(f.file, offset, buf, buf_size, file_size, id);

[PATCH 5.10 50/95] ALSA: usb-audio: Provide quirk for Sennheiser GSP670 Headset

[Greg Kroah-Hartman]

From: Brendan Grieve <brendan@grieve.com.au>

commit 3c414eb65c294719a91a746260085363413f91c1 upstream.

As per discussion at: https://github.com/szszoke/sennheiser-gsp670-pulseaudio-profile/issues/13

The GSP670 has 2 playback and 1 recording device that by default are
detected in an incompatible order for alsa. This may have been done to make
it compatible for the console by the manufacturer and only affects the
latest firmware which uses its own ID.

This quirk will resolve this by reordering the channels.

Signed-off-by: Brendan Grieve <brendan@grieve.com.au>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211015025335.196592-1-brendan@grieve.com.au
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/quirks-table.h |   32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -3698,6 +3698,38 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge
 		}
 	}
 },
+{
+	/*
+	 * Sennheiser GSP670
+	 * Change order of interfaces loaded
+	 */
+	USB_DEVICE(0x1395, 0x0300),
+	.bInterfaceClass = USB_CLASS_PER_INTERFACE,
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = &(const struct snd_usb_audio_quirk[]) {
+			// Communication
+			{
+				.ifnum = 3,
+				.type = QUIRK_AUDIO_STANDARD_INTERFACE
+			},
+			// Recording
+			{
+				.ifnum = 4,
+				.type = QUIRK_AUDIO_STANDARD_INTERFACE
+			},
+			// Main
+			{
+				.ifnum = 1,
+				.type = QUIRK_AUDIO_STANDARD_INTERFACE
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
 
 #undef USB_DEVICE_VENDOR_SPEC
 #undef USB_AUDIO_DEVICE

[PATCH 5.10 51/95] ALSA: hda/realtek: Add quirk for Clevo PC50HS

[Greg Kroah-Hartman]

From: Steven Clarkson <sc@lambdal.com>

commit aef454b40288158b850aab13e3d2a8c406779401 upstream.

Apply existing PCI quirk to the Clevo PC50HS and related models to fix
audio output on the built in speakers.

Signed-off-by: Steven Clarkson <sc@lambdal.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211014133554.1326741-1-sc@lambdal.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2547,6 +2547,7 @@ static const struct snd_pci_quirk alc882
 	SND_PCI_QUIRK(0x1558, 0x65d2, "Clevo PB51R[CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
 	SND_PCI_QUIRK(0x1558, 0x65e1, "Clevo PB51[ED][DF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
 	SND_PCI_QUIRK(0x1558, 0x65e5, "Clevo PC50D[PRS](?:-D|-G)?", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
+	SND_PCI_QUIRK(0x1558, 0x65f1, "Clevo PC50HS", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
 	SND_PCI_QUIRK(0x1558, 0x67d1, "Clevo PB71[ER][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
 	SND_PCI_QUIRK(0x1558, 0x67e1, "Clevo PB71[DE][CDF]", ALC1220_FIXUP_CLEVO_PB51ED_PINS),
 	SND_PCI_QUIRK(0x1558, 0x67e5, "Clevo PC70D[PRS](?:-D|-G)?", ALC1220_FIXUP_CLEVO_PB51ED_PINS),

[PATCH 5.10 52/95] ASoC: DAPM: Fix missing kctl change notifications

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 5af82c81b2c49cfb1cad84d9eb6eab0e3d1c4842 upstream.

The put callback of a kcontrol is supposed to return 1 when the value
is changed, and this will be notified to user-space.  However, some
DAPM kcontrols always return 0 (except for errors), hence the
user-space misses the update of a control value.

This patch corrects the behavior by properly returning 1 when the
value gets updated.

Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20211006141712.2439-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/soc-dapm.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -2559,6 +2559,7 @@ static int snd_soc_dapm_set_pin(struct s
 				const char *pin, int status)
 {
 	struct snd_soc_dapm_widget *w = dapm_find_widget(dapm, pin, true);
+	int ret = 0;
 
 	dapm_assert_locked(dapm);
 
@@ -2571,13 +2572,14 @@ static int snd_soc_dapm_set_pin(struct s
 		dapm_mark_dirty(w, "pin configuration");
 		dapm_widget_invalidate_input_paths(w);
 		dapm_widget_invalidate_output_paths(w);
+		ret = 1;
 	}
 
 	w->connected = status;
 	if (status == 0)
 		w->force = 0;
 
-	return 0;
+	return ret;
 }
 
 /**
@@ -3582,14 +3584,15 @@ int snd_soc_dapm_put_pin_switch(struct s
 {
 	struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
 	const char *pin = (const char *)kcontrol->private_value;
+	int ret;
 
 	if (ucontrol->value.integer.value[0])
-		snd_soc_dapm_enable_pin(&card->dapm, pin);
+		ret = snd_soc_dapm_enable_pin(&card->dapm, pin);
 	else
-		snd_soc_dapm_disable_pin(&card->dapm, pin);
+		ret = snd_soc_dapm_disable_pin(&card->dapm, pin);
 
 	snd_soc_dapm_sync(&card->dapm);
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(snd_soc_dapm_put_pin_switch);
 
@@ -4035,7 +4038,7 @@ static int snd_soc_dapm_dai_link_put(str
 
 	rtd->params_select = ucontrol->value.enumerated.item[0];
 
-	return 0;
+	return 1;
 }
 
 static void

[PATCH 5.10 53/95] audit: fix possible null-pointer dereference in audit_filter_rules

[Greg Kroah-Hartman]

From: Gaosheng Cui <cuigaosheng1@huawei.com>

commit 6e3ee990c90494561921c756481d0e2125d8b895 upstream.

Fix  possible null-pointer dereference in audit_filter_rules.

audit_filter_rules() error: we previously assumed 'ctx' could be null

Cc: stable@vger.kernel.org
Fixes: bf361231c295 ("audit: add saddr_fam filter field")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/auditsc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -653,7 +653,7 @@ static int audit_filter_rules(struct tas
 			result = audit_comparator(audit_loginuid_set(tsk), f->op, f->val);
 			break;
 		case AUDIT_SADDR_FAM:
-			if (ctx->sockaddr)
+			if (ctx && ctx->sockaddr)
 				result = audit_comparator(ctx->sockaddr->ss_family,
 							  f->op, f->val);
 			break;

[PATCH 5.10 54/95] net: dsa: mt7530: correct ds->num_ports

[Greg Kroah-Hartman]

From: DENG Qingfang <dqfext@gmail.com>

commit 342afce10d6f61c443c95e244f812d4766f73f53 upstream.

Setting ds->num_ports to DSA_MAX_PORTS made DSA core allocate unnecessary
dsa_port's and call mt7530_port_disable for non-existent ports.

Set it to MT7530_NUM_PORTS to fix that, and dsa_is_user_port check in
port_enable/disable is no longer required.

Cc: stable@vger.kernel.org
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/mt7530.c |    8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -981,9 +981,6 @@ mt7530_port_enable(struct dsa_switch *ds
 {
 	struct mt7530_priv *priv = ds->priv;
 
-	if (!dsa_is_user_port(ds, port))
-		return 0;
-
 	mutex_lock(&priv->reg_mutex);
 
 	/* Allow the user port gets connected to the cpu port and also
@@ -1006,9 +1003,6 @@ mt7530_port_disable(struct dsa_switch *d
 {
 	struct mt7530_priv *priv = ds->priv;
 
-	if (!dsa_is_user_port(ds, port))
-		return;
-
 	mutex_lock(&priv->reg_mutex);
 
 	/* Clear up all port matrix which could be restored in the next
@@ -2593,7 +2587,7 @@ mt7530_probe(struct mdio_device *mdiodev
 		return -ENOMEM;
 
 	priv->ds->dev = &mdiodev->dev;
-	priv->ds->num_ports = DSA_MAX_PORTS;
+	priv->ds->num_ports = MT7530_NUM_PORTS;
 
 	/* Use medatek,mcm property to distinguish hardware type that would
 	 * casues a little bit differences on power-on sequence.

[PATCH 5.10 55/95] powerpc64/idle: Fix SP offsets when saving GPRs

[Greg Kroah-Hartman]

From: Christopher M. Riedl <cmr@codefail.de>

commit 73287caa9210ded6066833195f4335f7f688a46b upstream.

The idle entry/exit code saves/restores GPRs in the stack "red zone"
(Protected Zone according to PowerPC64 ELF ABI v2). However, the offset
used for the first GPR is incorrect and overwrites the back chain - the
Protected Zone actually starts below the current SP. In practice this is
probably not an issue, but it's still incorrect so fix it.

Also expand the comments to explain why using the stack "red zone"
instead of creating a new stackframe is appropriate here.

Signed-off-by: Christopher M. Riedl <cmr@codefail.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210206072342.5067-1-cmr@codefail.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/kernel/idle_book3s.S |  138 ++++++++++++++++++++------------------
 1 file changed, 73 insertions(+), 65 deletions(-)

--- a/arch/powerpc/kernel/idle_book3s.S
+++ b/arch/powerpc/kernel/idle_book3s.S
@@ -52,28 +52,32 @@ _GLOBAL(isa300_idle_stop_mayloss)
 	std	r1,PACAR1(r13)
 	mflr	r4
 	mfcr	r5
-	/* use stack red zone rather than a new frame for saving regs */
-	std	r2,-8*0(r1)
-	std	r14,-8*1(r1)
-	std	r15,-8*2(r1)
-	std	r16,-8*3(r1)
-	std	r17,-8*4(r1)
-	std	r18,-8*5(r1)
-	std	r19,-8*6(r1)
-	std	r20,-8*7(r1)
-	std	r21,-8*8(r1)
-	std	r22,-8*9(r1)
-	std	r23,-8*10(r1)
-	std	r24,-8*11(r1)
-	std	r25,-8*12(r1)
-	std	r26,-8*13(r1)
-	std	r27,-8*14(r1)
-	std	r28,-8*15(r1)
-	std	r29,-8*16(r1)
-	std	r30,-8*17(r1)
-	std	r31,-8*18(r1)
-	std	r4,-8*19(r1)
-	std	r5,-8*20(r1)
+	/*
+	 * Use the stack red zone rather than a new frame for saving regs since
+	 * in the case of no GPR loss the wakeup code branches directly back to
+	 * the caller without deallocating the stack frame first.
+	 */
+	std	r2,-8*1(r1)
+	std	r14,-8*2(r1)
+	std	r15,-8*3(r1)
+	std	r16,-8*4(r1)
+	std	r17,-8*5(r1)
+	std	r18,-8*6(r1)
+	std	r19,-8*7(r1)
+	std	r20,-8*8(r1)
+	std	r21,-8*9(r1)
+	std	r22,-8*10(r1)
+	std	r23,-8*11(r1)
+	std	r24,-8*12(r1)
+	std	r25,-8*13(r1)
+	std	r26,-8*14(r1)
+	std	r27,-8*15(r1)
+	std	r28,-8*16(r1)
+	std	r29,-8*17(r1)
+	std	r30,-8*18(r1)
+	std	r31,-8*19(r1)
+	std	r4,-8*20(r1)
+	std	r5,-8*21(r1)
 	/* 168 bytes */
 	PPC_STOP
 	b	.	/* catch bugs */
@@ -89,8 +93,8 @@ _GLOBAL(isa300_idle_stop_mayloss)
  */
 _GLOBAL(idle_return_gpr_loss)
 	ld	r1,PACAR1(r13)
-	ld	r4,-8*19(r1)
-	ld	r5,-8*20(r1)
+	ld	r4,-8*20(r1)
+	ld	r5,-8*21(r1)
 	mtlr	r4
 	mtcr	r5
 	/*
@@ -98,25 +102,25 @@ _GLOBAL(idle_return_gpr_loss)
 	 * from PACATOC. This could be avoided for that less common case
 	 * if KVM saved its r2.
 	 */
-	ld	r2,-8*0(r1)
-	ld	r14,-8*1(r1)
-	ld	r15,-8*2(r1)
-	ld	r16,-8*3(r1)
-	ld	r17,-8*4(r1)
-	ld	r18,-8*5(r1)
-	ld	r19,-8*6(r1)
-	ld	r20,-8*7(r1)
-	ld	r21,-8*8(r1)
-	ld	r22,-8*9(r1)
-	ld	r23,-8*10(r1)
-	ld	r24,-8*11(r1)
-	ld	r25,-8*12(r1)
-	ld	r26,-8*13(r1)
-	ld	r27,-8*14(r1)
-	ld	r28,-8*15(r1)
-	ld	r29,-8*16(r1)
-	ld	r30,-8*17(r1)
-	ld	r31,-8*18(r1)
+	ld	r2,-8*1(r1)
+	ld	r14,-8*2(r1)
+	ld	r15,-8*3(r1)
+	ld	r16,-8*4(r1)
+	ld	r17,-8*5(r1)
+	ld	r18,-8*6(r1)
+	ld	r19,-8*7(r1)
+	ld	r20,-8*8(r1)
+	ld	r21,-8*9(r1)
+	ld	r22,-8*10(r1)
+	ld	r23,-8*11(r1)
+	ld	r24,-8*12(r1)
+	ld	r25,-8*13(r1)
+	ld	r26,-8*14(r1)
+	ld	r27,-8*15(r1)
+	ld	r28,-8*16(r1)
+	ld	r29,-8*17(r1)
+	ld	r30,-8*18(r1)
+	ld	r31,-8*19(r1)
 	blr
 
 /*
@@ -154,28 +158,32 @@ _GLOBAL(isa206_idle_insn_mayloss)
 	std	r1,PACAR1(r13)
 	mflr	r4
 	mfcr	r5
-	/* use stack red zone rather than a new frame for saving regs */
-	std	r2,-8*0(r1)
-	std	r14,-8*1(r1)
-	std	r15,-8*2(r1)
-	std	r16,-8*3(r1)
-	std	r17,-8*4(r1)
-	std	r18,-8*5(r1)
-	std	r19,-8*6(r1)
-	std	r20,-8*7(r1)
-	std	r21,-8*8(r1)
-	std	r22,-8*9(r1)
-	std	r23,-8*10(r1)
-	std	r24,-8*11(r1)
-	std	r25,-8*12(r1)
-	std	r26,-8*13(r1)
-	std	r27,-8*14(r1)
-	std	r28,-8*15(r1)
-	std	r29,-8*16(r1)
-	std	r30,-8*17(r1)
-	std	r31,-8*18(r1)
-	std	r4,-8*19(r1)
-	std	r5,-8*20(r1)
+	/*
+	 * Use the stack red zone rather than a new frame for saving regs since
+	 * in the case of no GPR loss the wakeup code branches directly back to
+	 * the caller without deallocating the stack frame first.
+	 */
+	std	r2,-8*1(r1)
+	std	r14,-8*2(r1)
+	std	r15,-8*3(r1)
+	std	r16,-8*4(r1)
+	std	r17,-8*5(r1)
+	std	r18,-8*6(r1)
+	std	r19,-8*7(r1)
+	std	r20,-8*8(r1)
+	std	r21,-8*9(r1)
+	std	r22,-8*10(r1)
+	std	r23,-8*11(r1)
+	std	r24,-8*12(r1)
+	std	r25,-8*13(r1)
+	std	r26,-8*14(r1)
+	std	r27,-8*15(r1)
+	std	r28,-8*16(r1)
+	std	r29,-8*17(r1)
+	std	r30,-8*18(r1)
+	std	r31,-8*19(r1)
+	std	r4,-8*20(r1)
+	std	r5,-8*21(r1)
 	cmpwi	r3,PNV_THREAD_NAP
 	bne	1f
 	IDLE_STATE_ENTER_SEQ_NORET(PPC_NAP)

[PATCH 5.10 56/95] KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest()

[Greg Kroah-Hartman]

From: Michael Ellerman <mpe@ellerman.id.au>

commit 9b4416c5095c20e110c82ae602c254099b83b72f upstream.

In commit 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in
C") kvm_start_guest() became idle_kvm_start_guest(). The old code
allocated a stack frame on the emergency stack, but didn't use the
frame to store anything, and also didn't store anything in its caller's
frame.

idle_kvm_start_guest() on the other hand is written more like a normal C
function, it creates a frame on entry, and also stores CR/LR into its
callers frame (per the ABI). The problem is that there is no caller
frame on the emergency stack.

The emergency stack for a given CPU is allocated with:

  paca_ptrs[i]->emergency_sp = alloc_stack(limit, i) + THREAD_SIZE;

So emergency_sp actually points to the first address above the emergency
stack allocation for a given CPU, we must not store above it without
first decrementing it to create a frame. This is different to the
regular kernel stack, paca->kstack, which is initialised to point at an
initial frame that is ready to use.

idle_kvm_start_guest() stores the backchain, CR and LR all of which
write outside the allocation for the emergency stack. It then creates a
stack frame and saves the non-volatile registers. Unfortunately the
frame it creates is not large enough to fit the non-volatiles, and so
the saving of the non-volatile registers also writes outside the
emergency stack allocation.

The end result is that we corrupt whatever is at 0-24 bytes, and 112-248
bytes above the emergency stack allocation.

In practice this has gone unnoticed because the memory immediately above
the emergency stack happens to be used for other stack allocations,
either another CPUs mc_emergency_sp or an IRQ stack. See the order of
calls to irqstack_early_init() and emergency_stack_init().

The low addresses of another stack are the top of that stack, and so are
only used if that stack is under extreme pressue, which essentially
never happens in practice - and if it did there's a high likelyhood we'd
crash due to that stack overflowing.

Still, we shouldn't be corrupting someone else's stack, and it is purely
luck that we aren't corrupting something else.

To fix it we save CR/LR into the caller's frame using the existing r1 on
entry, we then create a SWITCH_FRAME_SIZE frame (which has space for
pt_regs) on the emergency stack with the backchain pointing to the
existing stack, and then finally we switch to the new frame on the
emergency stack.

Fixes: 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in C")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211015133929.832061-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/kvm/book3s_hv_rmhandlers.S |   19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -292,13 +292,15 @@ kvm_novcpu_exit:
  * r3 contains the SRR1 wakeup value, SRR1 is trashed.
  */
 _GLOBAL(idle_kvm_start_guest)
-	ld	r4,PACAEMERGSP(r13)
 	mfcr	r5
 	mflr	r0
-	std	r1,0(r4)
-	std	r5,8(r4)
-	std	r0,16(r4)
-	subi	r1,r4,STACK_FRAME_OVERHEAD
+	std	r5, 8(r1)	// Save CR in caller's frame
+	std	r0, 16(r1)	// Save LR in caller's frame
+	// Create frame on emergency stack
+	ld	r4, PACAEMERGSP(r13)
+	stdu	r1, -SWITCH_FRAME_SIZE(r4)
+	// Switch to new frame on emergency stack
+	mr	r1, r4
 	SAVE_NVGPRS(r1)
 
 	/*
@@ -444,10 +446,9 @@ kvm_no_guest:
 	/* set up r3 for return */
 	mfspr	r3,SPRN_SRR1
 	REST_NVGPRS(r1)
-	addi	r1, r1, STACK_FRAME_OVERHEAD
-	ld	r0, 16(r1)
-	ld	r5, 8(r1)
-	ld	r1, 0(r1)
+	ld	r1, 0(r1)	// Switch back to caller stack
+	ld	r0, 16(r1)	// Reload LR
+	ld	r5, 8(r1)	// Reload CR
 	mtlr	r0
 	mtcr	r5
 	blr

[PATCH 5.10 57/95] KVM: PPC: Book3S HV: Make idle_kvm_start_guest() return 0 if it went to guest

[Greg Kroah-Hartman]

From: Michael Ellerman <mpe@ellerman.id.au>

commit cdeb5d7d890e14f3b70e8087e745c4a6a7d9f337 upstream.

We call idle_kvm_start_guest() from power7_offline() if the thread has
been requested to enter KVM. We pass it the SRR1 value that was returned
from power7_idle_insn() which tells us what sort of wakeup we're
processing.

Depending on the SRR1 value we pass in, the KVM code might enter the
guest, or it might return to us to do some host action if the wakeup
requires it.

If idle_kvm_start_guest() is able to handle the wakeup, and enter the
guest it is supposed to indicate that by returning a zero SRR1 value to
us.

That was the behaviour prior to commit 10d91611f426 ("powerpc/64s:
Reimplement book3s idle code in C"), however in that commit the
handling of SRR1 was reworked, and the zeroing behaviour was lost.

Returning from idle_kvm_start_guest() without zeroing the SRR1 value can
confuse the host offline code, causing the guest to crash and other
weirdness.

Fixes: 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in C")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211015133929.832061-2-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/kvm/book3s_hv_rmhandlers.S |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -301,6 +301,7 @@ _GLOBAL(idle_kvm_start_guest)
 	stdu	r1, -SWITCH_FRAME_SIZE(r4)
 	// Switch to new frame on emergency stack
 	mr	r1, r4
+	std	r3, 32(r1)	// Save SRR1 wakeup value
 	SAVE_NVGPRS(r1)
 
 	/*
@@ -352,6 +353,10 @@ kvm_unsplit_wakeup:
 
 kvm_secondary_got_guest:
 
+	// About to go to guest, clear saved SRR1
+	li	r0, 0
+	std	r0, 32(r1)
+
 	/* Set HSTATE_DSCR(r13) to something sensible */
 	ld	r6, PACA_DSCR_DEFAULT(r13)
 	std	r6, HSTATE_DSCR(r13)
@@ -443,8 +448,8 @@ kvm_no_guest:
 	mfspr	r4, SPRN_LPCR
 	rlwimi	r4, r3, 0, LPCR_PECE0 | LPCR_PECE1
 	mtspr	SPRN_LPCR, r4
-	/* set up r3 for return */
-	mfspr	r3,SPRN_SRR1
+	// Return SRR1 wakeup value, or 0 if we went into the guest
+	ld	r3, 32(r1)
 	REST_NVGPRS(r1)
 	ld	r1, 0(r1)	// Switch back to caller stack
 	ld	r0, 16(r1)	// Reload LR

[PATCH 5.10 58/95] powerpc/idle: Dont corrupt back chain when going idle

[Greg Kroah-Hartman]

From: Michael Ellerman <mpe@ellerman.id.au>

commit 496c5fe25c377ddb7815c4ce8ecfb676f051e9b6 upstream.

In isa206_idle_insn_mayloss() we store various registers into the stack
red zone, which is allowed.

However inside the IDLE_STATE_ENTER_SEQ_NORET macro we save r2 again,
to 0(r1), which corrupts the stack back chain.

We used to do the same in isa206_idle_insn_mayloss() itself, but we
fixed that in 73287caa9210 ("powerpc64/idle: Fix SP offsets when saving
GPRs"), however we missed that the macro also corrupts the back chain.

Corrupting the back chain is bad for debuggability but doesn't
necessarily cause a bug.

However we recently changed the stack handling in some KVM code, and it
now relies on the stack back chain being valid when it returns. The
corruption causes that code to return with r1 pointing somewhere in
kernel data, at some point LR is restored from the stack and we branch
to NULL or somewhere else invalid.

Only affects Power8 hosts running KVM guests, with dynamic_mt_modes
enabled (which it is by default).

The fixes tag below points to the commit that changed the KVM stack
handling, exposing this bug. The actual corruption of the back chain has
always existed since 948cf67c4726 ("powerpc: Add NAP mode support on
Power7 in HV mode").

Fixes: 9b4416c5095c ("KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211020094826.3222052-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/kernel/idle_book3s.S |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/arch/powerpc/kernel/idle_book3s.S
+++ b/arch/powerpc/kernel/idle_book3s.S
@@ -126,14 +126,16 @@ _GLOBAL(idle_return_gpr_loss)
 /*
  * This is the sequence required to execute idle instructions, as
  * specified in ISA v2.07 (and earlier). MSR[IR] and MSR[DR] must be 0.
- *
- * The 0(r1) slot is used to save r2 in isa206, so use that here.
+ * We have to store a GPR somewhere, ptesync, then reload it, and create
+ * a false dependency on the result of the load. It doesn't matter which
+ * GPR we store, or where we store it. We have already stored r2 to the
+ * stack at -8(r1) in isa206_idle_insn_mayloss, so use that.
  */
 #define IDLE_STATE_ENTER_SEQ_NORET(IDLE_INST)			\
 	/* Magic NAP/SLEEP/WINKLE mode enter sequence */	\
-	std	r2,0(r1);					\
+	std	r2,-8(r1);					\
 	ptesync;						\
-	ld	r2,0(r1);					\
+	ld	r2,-8(r1);					\
 236:	cmpd	cr0,r2,r2;					\
 	bne	236b;						\
 	IDLE_INST;						\

[PATCH 5.10 59/95] mm, slub: fix mismatch between reconstructed freelist depth and cnt

[Greg Kroah-Hartman]

From: Miaohe Lin <linmiaohe@huawei.com>

commit 899447f669da76cc3605665e1a95ee877bc464cc upstream.

If object's reuse is delayed, it will be excluded from the reconstructed
freelist.  But we forgot to adjust the cnt accordingly.  So there will
be a mismatch between reconstructed freelist depth and cnt.  This will
lead to free_debug_processing() complaining about freelist count or a
incorrect slub inuse count.

Link: https://lkml.kernel.org/r/20210916123920.48704-3-linmiaohe@huawei.com
Fixes: c3895391df38 ("kasan, slub: fix handling of kasan_slab_free hook")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Faiyaz Mohammed <faiyazm@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/slub.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1543,7 +1543,8 @@ static __always_inline bool slab_free_ho
 }
 
 static inline bool slab_free_freelist_hook(struct kmem_cache *s,
-					   void **head, void **tail)
+					   void **head, void **tail,
+					   int *cnt)
 {
 
 	void *object;
@@ -1578,6 +1579,12 @@ static inline bool slab_free_freelist_ho
 			*head = object;
 			if (!*tail)
 				*tail = object;
+		} else {
+			/*
+			 * Adjust the reconstructed freelist depth
+			 * accordingly if object's reuse is delayed.
+			 */
+			--(*cnt);
 		}
 	} while (object != old_tail);
 
@@ -3137,7 +3144,7 @@ static __always_inline void slab_free(st
 	 * With KASAN enabled slab_free_freelist_hook modifies the freelist
 	 * to remove objects, whose reuse must be delayed.
 	 */
-	if (slab_free_freelist_hook(s, &head, &tail))
+	if (slab_free_freelist_hook(s, &head, &tail, &cnt))
 		do_slab_free(s, page, head, tail, cnt, addr);
 }
 

[PATCH 5.10 60/95] mm, slub: fix potential memoryleak in kmem_cache_open()

[Greg Kroah-Hartman]

From: Miaohe Lin <linmiaohe@huawei.com>

commit 9037c57681d25e4dcc442d940d6dbe24dd31f461 upstream.

In error path, the random_seq of slub cache might be leaked.  Fix this
by using __kmem_cache_release() to release all the relevant resources.

Link: https://lkml.kernel.org/r/20210916123920.48704-4-linmiaohe@huawei.com
Fixes: 210e7a43fa90 ("mm: SLUB freelist randomization")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Faiyaz Mohammed <faiyazm@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/slub.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/slub.c
+++ b/mm/slub.c
@@ -3832,8 +3832,8 @@ static int kmem_cache_open(struct kmem_c
 	if (alloc_kmem_cache_cpus(s))
 		return 0;
 
-	free_kmem_cache_nodes(s);
 error:
+	__kmem_cache_release(s);
 	return -EINVAL;
 }
 

[PATCH 5.10 61/95] mm, slub: fix incorrect memcg slab count for bulk free

[Greg Kroah-Hartman]

From: Miaohe Lin <linmiaohe@huawei.com>

commit 3ddd60268c24bcac9d744404cc277e9dc52fe6b6 upstream.

kmem_cache_free_bulk() will call memcg_slab_free_hook() for all objects
when doing bulk free.  So we shouldn't call memcg_slab_free_hook() again
for bulk free to avoid incorrect memcg slab count.

Link: https://lkml.kernel.org/r/20210916123920.48704-6-linmiaohe@huawei.com
Fixes: d1b2cf6cb84a ("mm: memcg/slab: uncharge during kmem_cache_free_bulk()")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Faiyaz Mohammed <faiyazm@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/slub.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/mm/slub.c
+++ b/mm/slub.c
@@ -3100,7 +3100,9 @@ static __always_inline void do_slab_free
 	struct kmem_cache_cpu *c;
 	unsigned long tid;
 
-	memcg_slab_free_hook(s, &head, 1);
+	/* memcg_slab_free_hook() is already called for bulk free. */
+	if (!tail)
+		memcg_slab_free_hook(s, &head, 1);
 redo:
 	/*
 	 * Determine the currently cpus per cpu slab.

[PATCH 5.10 62/95] KVM: nVMX: promptly process interrupts delivered while in guest mode

[Greg Kroah-Hartman]

From: Paolo Bonzini <pbonzini@redhat.com>

commit 3a25dfa67fe40f3a2690af2c562e0947a78bd6a0 upstream.

Since commit c300ab9f08df ("KVM: x86: Replace late check_nested_events() hack with
more precise fix") there is no longer the certainty that check_nested_events()
tries to inject an external interrupt vmexit to L1 on every call to vcpu_enter_guest.
Therefore, even in that case we need to set KVM_REQ_EVENT.  This ensures
that inject_pending_event() is called, and from there kvm_check_nested_events().

Fixes: c300ab9f08df ("KVM: x86: Replace late check_nested_events() hack with more precise fix")
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kvm/vmx/vmx.c |   17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -6316,18 +6316,13 @@ static int vmx_sync_pir_to_irr(struct kv
 
 		/*
 		 * If we are running L2 and L1 has a new pending interrupt
-		 * which can be injected, we should re-evaluate
-		 * what should be done with this new L1 interrupt.
-		 * If L1 intercepts external-interrupts, we should
-		 * exit from L2 to L1. Otherwise, interrupt should be
-		 * delivered directly to L2.
+		 * which can be injected, this may cause a vmexit or it may
+		 * be injected into L2.  Either way, this interrupt will be
+		 * processed via KVM_REQ_EVENT, not RVI, because we do not use
+		 * virtual interrupt delivery to inject L1 interrupts into L2.
 		 */
-		if (is_guest_mode(vcpu) && max_irr_updated) {
-			if (nested_exit_on_intr(vcpu))
-				kvm_vcpu_exiting_guest_mode(vcpu);
-			else
-				kvm_make_request(KVM_REQ_EVENT, vcpu);
-		}
+		if (is_guest_mode(vcpu) && max_irr_updated)
+			kvm_make_request(KVM_REQ_EVENT, vcpu);
 	} else {
 		max_irr = kvm_lapic_find_highest_irr(vcpu);
 	}

[PATCH 5.10 63/95] nfc: nci: fix the UAF of rf_conn_info object

[Greg Kroah-Hartman]

From: Lin Ma <linma@zju.edu.cn>

commit 1b1499a817c90fd1ce9453a2c98d2a01cca0e775 upstream.

The nci_core_conn_close_rsp_packet() function will release the conn_info
with given conn_id. However, it needs to set the rf_conn_info to NULL to
prevent other routines like nci_rf_intf_activated_ntf_packet() to trigger
the UAF.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/nfc/nci/rsp.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/nfc/nci/rsp.c
+++ b/net/nfc/nci/rsp.c
@@ -277,6 +277,8 @@ static void nci_core_conn_close_rsp_pack
 							 ndev->cur_conn_id);
 		if (conn_info) {
 			list_del(&conn_info->list);
+			if (conn_info == ndev->rf_conn_info)
+				ndev->rf_conn_info = NULL;
 			devm_kfree(&ndev->nfc_dev->dev, conn_info);
 		}
 	}

[PATCH 5.10 64/95] isdn: cpai: check ctr->cnr to avoid array index out of bound

[Greg Kroah-Hartman]

From: Xiaolong Huang <butterflyhuangxx@gmail.com>

commit 1f3e2e97c003f80c4b087092b225c8787ff91e4d upstream.

The cmtp_add_connection() would add a cmtp session to a controller
and run a kernel thread to process cmtp.

	__module_get(THIS_MODULE);
	session->task = kthread_run(cmtp_session, session, "kcmtpd_ctr_%d",
								session->num);

During this process, the kernel thread would call detach_capi_ctr()
to detach a register controller. if the controller
was not attached yet, detach_capi_ctr() would
trigger an array-index-out-bounds bug.

[   46.866069][ T6479] UBSAN: array-index-out-of-bounds in
drivers/isdn/capi/kcapi.c:483:21
[   46.867196][ T6479] index -1 is out of range for type 'capi_ctr *[32]'
[   46.867982][ T6479] CPU: 1 PID: 6479 Comm: kcmtpd_ctr_0 Not tainted
5.15.0-rc2+ #8
[   46.869002][ T6479] Hardware name: QEMU Standard PC (i440FX + PIIX,
1996), BIOS 1.14.0-2 04/01/2014
[   46.870107][ T6479] Call Trace:
[   46.870473][ T6479]  dump_stack_lvl+0x57/0x7d
[   46.870974][ T6479]  ubsan_epilogue+0x5/0x40
[   46.871458][ T6479]  __ubsan_handle_out_of_bounds.cold+0x43/0x48
[   46.872135][ T6479]  detach_capi_ctr+0x64/0xc0
[   46.872639][ T6479]  cmtp_session+0x5c8/0x5d0
[   46.873131][ T6479]  ? __init_waitqueue_head+0x60/0x60
[   46.873712][ T6479]  ? cmtp_add_msgpart+0x120/0x120
[   46.874256][ T6479]  kthread+0x147/0x170
[   46.874709][ T6479]  ? set_kthread_struct+0x40/0x40
[   46.875248][ T6479]  ret_from_fork+0x1f/0x30
[   46.875773][ T6479]

Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211008065830.305057-1-butterflyhuangxx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/isdn/capi/kcapi.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/isdn/capi/kcapi.c
+++ b/drivers/isdn/capi/kcapi.c
@@ -480,6 +480,11 @@ int detach_capi_ctr(struct capi_ctr *ctr
 
 	ctr_down(ctr, CAPI_CTR_DETACHED);
 
+	if (ctr->cnr < 1 || ctr->cnr - 1 >= CAPI_MAXCONTR) {
+		err = -EINVAL;
+		goto unlock_out;
+	}
+
 	if (capi_controller[ctr->cnr - 1] != ctr) {
 		err = -EINVAL;
 		goto unlock_out;

[PATCH 5.10 65/95] netfilter: Kconfig: use default y instead of m for bool config option

[Greg Kroah-Hartman]

From: Vegard Nossum <vegard.nossum@gmail.com>

commit 77076934afdcd46516caf18ed88b2f88025c9ddb upstream.

This option, NF_CONNTRACK_SECMARK, is a bool, so it can never be 'm'.

Fixes: 33b8e77605620 ("[NETFILTER]: Add CONFIG_NETFILTER_ADVANCED option")
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -94,7 +94,7 @@ config NF_CONNTRACK_MARK
 config NF_CONNTRACK_SECMARK
 	bool  'Connection tracking security mark support'
 	depends on NETWORK_SECMARK
-	default m if NETFILTER_ADVANCED=n
+	default y if NETFILTER_ADVANCED=n
 	help
 	  This option enables security markings to be applied to
 	  connections.  Typically they are copied to connections from

[PATCH 5.10 66/95] selftests: netfilter: remove stray bash debug line

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

commit 3e6ed7703dae6838c104d73d3e76e9b79f5c0528 upstream.

This should not be there.

Fixes: 2de03b45236f ("selftests: netfilter: add flowtable test script")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/netfilter/nft_flowtable.sh |    1 -
 1 file changed, 1 deletion(-)

--- a/tools/testing/selftests/netfilter/nft_flowtable.sh
+++ b/tools/testing/selftests/netfilter/nft_flowtable.sh
@@ -199,7 +199,6 @@ fi
 # test basic connectivity
 if ! ip netns exec ns1 ping -c 1 -q 10.0.2.99 > /dev/null; then
   echo "ERROR: ns1 cannot reach ns2" 1>&2
-  bash
   exit 1
 fi
 

[PATCH 5.10 67/95] net: bridge: mcast: use multicast_membership_interval for IGMPv3

[Greg Kroah-Hartman]

From: Nikolay Aleksandrov <nikolay@nvidia.com>

commit fac3cb82a54a4b7c49c932f96ef196cf5774344c upstream.

When I added IGMPv3 support I decided to follow the RFC for computing
the GMI dynamically:
" 8.4. Group Membership Interval

   The Group Membership Interval is the amount of time that must pass
   before a multicast router decides there are no more members of a
   group or a particular source on a network.

   This value MUST be ((the Robustness Variable) times (the Query
   Interval)) plus (one Query Response Interval)."

But that actually is inconsistent with how the bridge used to compute it
for IGMPv2, where it was user-configurable that has a correct default value
but it is up to user-space to maintain it. This would make it consistent
with the other timer values which are also maintained correct by the user
instead of being dynamically computed. It also changes back to the previous
user-expected GMI behaviour for IGMPv3 queries which were supported before
IGMPv3 was added. Note that to properly compute it dynamically we would
need to add support for "Robustness Variable" which is currently missing.

Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes: 0436862e417e ("net: bridge: mcast: support for IGMPv3/MLDv2 ALLOW_NEW_SOURCES report")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bridge/br_private.h |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -931,9 +931,7 @@ static inline unsigned long br_multicast
 
 static inline unsigned long br_multicast_gmi(const struct net_bridge *br)
 {
-	/* use the RFC default of 2 for QRV */
-	return 2 * br->multicast_query_interval +
-	       br->multicast_query_response_interval;
+	return br->multicast_membership_interval;
 }
 #else
 static inline int br_multicast_rcv(struct net_bridge *br,

[PATCH 5.10 68/95] drm: mxsfb: Fix NULL pointer dereference crash on unload

[Greg Kroah-Hartman]

From: Marek Vasut <marex@denx.de>

commit 3cfc183052c3dbf8eae57b6c1685dab00ed3db4a upstream.

The mxsfb->crtc.funcs may already be NULL when unloading the driver,
in which case calling mxsfb_irq_disable() via drm_irq_uninstall() from
mxsfb_unload() leads to NULL pointer dereference.

Since all we care about is masking the IRQ and mxsfb->base is still
valid, just use that to clear and mask the IRQ.

Fixes: ae1ed00932819 ("drm: mxsfb: Stop using DRM simple display pipeline helper")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Abrecht <public@danielabrecht.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211016210446.171616-1-marex@denx.de
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/mxsfb/mxsfb_drv.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
+++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
@@ -268,7 +268,11 @@ static void mxsfb_irq_disable(struct drm
 	struct mxsfb_drm_private *mxsfb = drm->dev_private;
 
 	mxsfb_enable_axi_clk(mxsfb);
-	mxsfb->crtc.funcs->disable_vblank(&mxsfb->crtc);
+
+	/* Disable and clear VBLANK IRQ */
+	writel(CTRL1_CUR_FRAME_DONE_IRQ_EN, mxsfb->base + LCDC_CTRL1 + REG_CLR);
+	writel(CTRL1_CUR_FRAME_DONE_IRQ, mxsfb->base + LCDC_CTRL1 + REG_CLR);
+
 	mxsfb_disable_axi_clk(mxsfb);
 }
 

[PATCH 5.10 69/95] net: hns3: fix the max tx size according to user manual

[Greg Kroah-Hartman]

From: Yunsheng Lin <linyunsheng@huawei.com>

commit adfb7b4966c0c4c63a791f202b8b3837b07a9ece upstream.

Currently the max tx size supported by the hw is calculated by
using the max BD num supported by the hw. According to the hw
user manual, the max tx size is fixed value for both non-TSO and
TSO skb.

This patch updates the max tx size according to the manual.

Fixes: 8ae10cfb5089("net: hns3: support tx-scatter-gather-fraglist feature")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.c |    7 ++-----
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.h |    6 ++----
 2 files changed, 4 insertions(+), 9 deletions(-)

--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -1283,7 +1283,6 @@ void hns3_shinfo_pack(struct skb_shared_
 
 static int hns3_skb_linearize(struct hns3_enet_ring *ring,
 			      struct sk_buff *skb,
-			      u8 max_non_tso_bd_num,
 			      unsigned int bd_num)
 {
 	/* 'bd_num == UINT_MAX' means the skb' fraglist has a
@@ -1300,8 +1299,7 @@ static int hns3_skb_linearize(struct hns
 	 * will not help.
 	 */
 	if (skb->len > HNS3_MAX_TSO_SIZE ||
-	    (!skb_is_gso(skb) && skb->len >
-	     HNS3_MAX_NON_TSO_SIZE(max_non_tso_bd_num))) {
+	    (!skb_is_gso(skb) && skb->len > HNS3_MAX_NON_TSO_SIZE)) {
 		u64_stats_update_begin(&ring->syncp);
 		ring->stats.hw_limitation++;
 		u64_stats_update_end(&ring->syncp);
@@ -1336,8 +1334,7 @@ static int hns3_nic_maybe_stop_tx(struct
 			goto out;
 		}
 
-		if (hns3_skb_linearize(ring, skb, max_non_tso_bd_num,
-				       bd_num))
+		if (hns3_skb_linearize(ring, skb, bd_num))
 			return -ENOMEM;
 
 		bd_num = hns3_tx_bd_count(skb->len);
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
@@ -170,11 +170,9 @@ enum hns3_nic_state {
 
 #define HNS3_MAX_BD_SIZE			65535
 #define HNS3_MAX_TSO_BD_NUM			63U
-#define HNS3_MAX_TSO_SIZE \
-	(HNS3_MAX_BD_SIZE * HNS3_MAX_TSO_BD_NUM)
+#define HNS3_MAX_TSO_SIZE			1048576U
+#define HNS3_MAX_NON_TSO_SIZE			9728U
 
-#define HNS3_MAX_NON_TSO_SIZE(max_non_tso_bd_num) \
-	(HNS3_MAX_BD_SIZE * (max_non_tso_bd_num))
 
 #define HNS3_VECTOR_GL0_OFFSET			0x100
 #define HNS3_VECTOR_GL1_OFFSET			0x200

[PATCH 5.10 70/95] gcc-plugins/structleak: add makefile var for disabling structleak

[Greg Kroah-Hartman]

From: Brendan Higgins <brendanhiggins@google.com>

[ Upstream commit 554afc3b9797511e3245864e32aebeb6abbab1e3 ]

KUnit and structleak don't play nice, so add a makefile variable for
enabling structleak when it complains.

Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/Makefile.gcc-plugins | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/scripts/Makefile.gcc-plugins b/scripts/Makefile.gcc-plugins
index 952e46876329..4aad28480035 100644
--- a/scripts/Makefile.gcc-plugins
+++ b/scripts/Makefile.gcc-plugins
@@ -19,6 +19,10 @@ gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF)		\
 		+= -fplugin-arg-structleak_plugin-byref
 gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL)	\
 		+= -fplugin-arg-structleak_plugin-byref-all
+ifdef CONFIG_GCC_PLUGIN_STRUCTLEAK
+    DISABLE_STRUCTLEAK_PLUGIN += -fplugin-arg-structleak_plugin-disable
+endif
+export DISABLE_STRUCTLEAK_PLUGIN
 gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_STRUCTLEAK)		\
 		+= -DSTRUCTLEAK_PLUGIN
 
-- 
2.33.0

[PATCH 5.10 71/95] ALSA: hda: intel: Allow repeatedly probing on codec configuration errors

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit c0f1886de7e173865f1a0fa7680a1c07954a987f ]

It seems that a few recent AMD systems show the codec configuration
errors at the early boot, while loading the driver at a later stage
works magically.  Although the root cause of the error isn't clear,
it's certainly not bad to allow retrying the codec probe in such a
case if that helps.

This patch adds the capability for retrying the probe upon codec probe
errors on the certain AMD platforms.  The probe_work is changed to a
delayed work, and at the secondary call, it'll jump to the codec
probing.

Note that, not only adding the re-probing, this includes the behavior
changes in the codec configuration function.  Namely,
snd_hda_codec_configure() won't unregister the codec at errors any
longer.  Instead, its caller, azx_codec_configure() unregisters the
codecs with the probe failures *if* any codec has been successfully
configured.  If all codec probe failed, it doesn't unregister but let
it re-probed -- which is the most case we're seeing and this patch
tries to improve.

Even if the driver doesn't re-probe or give up, it will go to the
"free-all" error path, hence the leftover codecs shall be disabled /
deleted in anyway.

BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1190801
Link: https://lore.kernel.org/r/20211006141940.2897-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/sound/hda_codec.h      |  1 +
 sound/pci/hda/hda_bind.c       | 20 +++++++++++---------
 sound/pci/hda/hda_codec.c      |  1 +
 sound/pci/hda/hda_controller.c | 24 ++++++++++++++++--------
 sound/pci/hda/hda_controller.h |  2 +-
 sound/pci/hda/hda_intel.c      | 29 +++++++++++++++++++++++------
 sound/pci/hda/hda_intel.h      |  4 +++-
 7 files changed, 56 insertions(+), 25 deletions(-)

diff --git a/include/sound/hda_codec.h b/include/sound/hda_codec.h
index 73827b7d17e0..cf530e9fb5f5 100644
--- a/include/sound/hda_codec.h
+++ b/include/sound/hda_codec.h
@@ -225,6 +225,7 @@ struct hda_codec {
 #endif
 
 	/* misc flags */
+	unsigned int configured:1; /* codec was configured */
 	unsigned int in_freeing:1; /* being released */
 	unsigned int registered:1; /* codec was registered */
 	unsigned int display_power_control:1; /* needs display power */
diff --git a/sound/pci/hda/hda_bind.c b/sound/pci/hda/hda_bind.c
index 17a25e453f60..4efbcc41fdfb 100644
--- a/sound/pci/hda/hda_bind.c
+++ b/sound/pci/hda/hda_bind.c
@@ -301,29 +301,31 @@ int snd_hda_codec_configure(struct hda_codec *codec)
 {
 	int err;
 
+	if (codec->configured)
+		return 0;
+
 	if (is_generic_config(codec))
 		codec->probe_id = HDA_CODEC_ID_GENERIC;
 	else
 		codec->probe_id = 0;
 
-	err = snd_hdac_device_register(&codec->core);
-	if (err < 0)
-		return err;
+	if (!device_is_registered(&codec->core.dev)) {
+		err = snd_hdac_device_register(&codec->core);
+		if (err < 0)
+			return err;
+	}
 
 	if (!codec->preset)
 		codec_bind_module(codec);
 	if (!codec->preset) {
 		err = codec_bind_generic(codec);
 		if (err < 0) {
-			codec_err(codec, "Unable to bind the codec\n");
-			goto error;
+			codec_dbg(codec, "Unable to bind the codec\n");
+			return err;
 		}
 	}
 
+	codec->configured = 1;
 	return 0;
-
- error:
-	snd_hdac_device_unregister(&codec->core);
-	return err;
 }
 EXPORT_SYMBOL_GPL(snd_hda_codec_configure);
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 4cec1bd77e6f..6dece719be66 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -791,6 +791,7 @@ void snd_hda_codec_cleanup_for_unbind(struct hda_codec *codec)
 	snd_array_free(&codec->nids);
 	remove_conn_list(codec);
 	snd_hdac_regmap_exit(&codec->core);
+	codec->configured = 0;
 }
 EXPORT_SYMBOL_GPL(snd_hda_codec_cleanup_for_unbind);
 
diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c
index b972d59eb1ec..3de7dc34def2 100644
--- a/sound/pci/hda/hda_controller.c
+++ b/sound/pci/hda/hda_controller.c
@@ -25,6 +25,7 @@
 #include <sound/core.h>
 #include <sound/initval.h>
 #include "hda_controller.h"
+#include "hda_local.h"
 
 #define CREATE_TRACE_POINTS
 #include "hda_controller_trace.h"
@@ -1259,17 +1260,24 @@ EXPORT_SYMBOL_GPL(azx_probe_codecs);
 int azx_codec_configure(struct azx *chip)
 {
 	struct hda_codec *codec, *next;
+	int success = 0;
 
-	/* use _safe version here since snd_hda_codec_configure() deregisters
-	 * the device upon error and deletes itself from the bus list.
-	 */
-	list_for_each_codec_safe(codec, next, &chip->bus) {
-		snd_hda_codec_configure(codec);
+	list_for_each_codec(codec, &chip->bus) {
+		if (!snd_hda_codec_configure(codec))
+			success++;
 	}
 
-	if (!azx_bus(chip)->num_codecs)
-		return -ENODEV;
-	return 0;
+	if (success) {
+		/* unregister failed codecs if any codec has been probed */
+		list_for_each_codec_safe(codec, next, &chip->bus) {
+			if (!codec->configured) {
+				codec_err(codec, "Unable to configure, disabling\n");
+				snd_hdac_device_unregister(&codec->core);
+			}
+		}
+	}
+
+	return success ? 0 : -ENODEV;
 }
 EXPORT_SYMBOL_GPL(azx_codec_configure);
 
diff --git a/sound/pci/hda/hda_controller.h b/sound/pci/hda/hda_controller.h
index 68f9668788ea..324cba13c7ba 100644
--- a/sound/pci/hda/hda_controller.h
+++ b/sound/pci/hda/hda_controller.h
@@ -41,7 +41,7 @@
 /* 24 unused */
 #define AZX_DCAPS_COUNT_LPIB_DELAY  (1 << 25)	/* Take LPIB as delay */
 #define AZX_DCAPS_PM_RUNTIME	(1 << 26)	/* runtime PM support */
-/* 27 unused */
+#define AZX_DCAPS_RETRY_PROBE	(1 << 27)	/* retry probe if no codec is configured */
 #define AZX_DCAPS_CORBRP_SELF_CLEAR (1 << 28)	/* CORBRP clears itself after reset */
 #define AZX_DCAPS_NO_MSI64      (1 << 29)	/* Stick to 32-bit MSIs */
 #define AZX_DCAPS_SEPARATE_STREAM_TAG	(1 << 30) /* capture and playback use separate stream tag */
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 4c8b281c3992..8bc27e7c0590 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -341,7 +341,8 @@ enum {
 /* quirks for AMD SB */
 #define AZX_DCAPS_PRESET_AMD_SB \
 	(AZX_DCAPS_NO_TCSEL | AZX_DCAPS_AMD_WORKAROUND |\
-	 AZX_DCAPS_SNOOP_TYPE(ATI) | AZX_DCAPS_PM_RUNTIME)
+	 AZX_DCAPS_SNOOP_TYPE(ATI) | AZX_DCAPS_PM_RUNTIME |\
+	 AZX_DCAPS_RETRY_PROBE)
 
 /* quirks for Nvidia */
 #define AZX_DCAPS_PRESET_NVIDIA \
@@ -1758,7 +1759,7 @@ static void azx_check_snoop_available(struct azx *chip)
 
 static void azx_probe_work(struct work_struct *work)
 {
-	struct hda_intel *hda = container_of(work, struct hda_intel, probe_work);
+	struct hda_intel *hda = container_of(work, struct hda_intel, probe_work.work);
 	azx_probe_continue(&hda->chip);
 }
 
@@ -1867,7 +1868,7 @@ static int azx_create(struct snd_card *card, struct pci_dev *pci,
 	}
 
 	/* continue probing in work context as may trigger request module */
-	INIT_WORK(&hda->probe_work, azx_probe_work);
+	INIT_DELAYED_WORK(&hda->probe_work, azx_probe_work);
 
 	*rchip = chip;
 
@@ -2202,7 +2203,7 @@ static int azx_probe(struct pci_dev *pci,
 #endif
 
 	if (schedule_probe)
-		schedule_work(&hda->probe_work);
+		schedule_delayed_work(&hda->probe_work, 0);
 
 	dev++;
 	if (chip->disabled)
@@ -2290,6 +2291,11 @@ static int azx_probe_continue(struct azx *chip)
 	int dev = chip->dev_index;
 	int err;
 
+	if (chip->disabled || hda->init_failed)
+		return -EIO;
+	if (hda->probe_retry)
+		goto probe_retry;
+
 	to_hda_bus(bus)->bus_probing = 1;
 	hda->probe_continued = 1;
 
@@ -2351,10 +2357,20 @@ static int azx_probe_continue(struct azx *chip)
 #endif
 	}
 #endif
+
+ probe_retry:
 	if (bus->codec_mask && !(probe_only[dev] & 1)) {
 		err = azx_codec_configure(chip);
-		if (err < 0)
+		if (err) {
+			if ((chip->driver_caps & AZX_DCAPS_RETRY_PROBE) &&
+			    ++hda->probe_retry < 60) {
+				schedule_delayed_work(&hda->probe_work,
+						      msecs_to_jiffies(1000));
+				return 0; /* keep things up */
+			}
+			dev_err(chip->card->dev, "Cannot probe codecs, giving up\n");
 			goto out_free;
+		}
 	}
 
 	err = snd_card_register(chip->card);
@@ -2384,6 +2400,7 @@ out_free:
 		display_power(chip, false);
 	complete_all(&hda->probe_wait);
 	to_hda_bus(bus)->bus_probing = 0;
+	hda->probe_retry = 0;
 	return 0;
 }
 
@@ -2409,7 +2426,7 @@ static void azx_remove(struct pci_dev *pci)
 		 * device during cancel_work_sync() call.
 		 */
 		device_unlock(&pci->dev);
-		cancel_work_sync(&hda->probe_work);
+		cancel_delayed_work_sync(&hda->probe_work);
 		device_lock(&pci->dev);
 
 		snd_card_free(card);
diff --git a/sound/pci/hda/hda_intel.h b/sound/pci/hda/hda_intel.h
index 3fb119f09040..0f39418f9328 100644
--- a/sound/pci/hda/hda_intel.h
+++ b/sound/pci/hda/hda_intel.h
@@ -14,7 +14,7 @@ struct hda_intel {
 
 	/* sync probing */
 	struct completion probe_wait;
-	struct work_struct probe_work;
+	struct delayed_work probe_work;
 
 	/* card list (for power_save trigger) */
 	struct list_head list;
@@ -30,6 +30,8 @@ struct hda_intel {
 	unsigned int freed:1; /* resources already released */
 
 	bool need_i915_power:1; /* the hda controller needs i915 power */
+
+	int probe_retry;	/* being probe-retry */
 };
 
 #endif
-- 
2.33.0

[PATCH 5.10 72/95] btrfs: deal with errors when checking if a dir entry exists during log replay

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

[ Upstream commit 77a5b9e3d14cbce49ceed2766b2003c034c066dc ]

Currently inode_in_dir() ignores errors returned from
btrfs_lookup_dir_index_item() and from btrfs_lookup_dir_item(), treating
any errors as if the directory entry does not exists in the fs/subvolume
tree, which is obviously not correct, as we can get errors such as -EIO
when reading extent buffers while searching the fs/subvolume's tree.

Fix that by making inode_in_dir() return the errors and making its only
caller, add_inode_ref(), deal with returned errors as well.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/tree-log.c | 47 ++++++++++++++++++++++++++++-----------------
 1 file changed, 29 insertions(+), 18 deletions(-)

diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index c3bb5c4375ab..3b93a98fd544 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -894,9 +894,11 @@ out:
 }
 
 /*
- * helper function to see if a given name and sequence number found
- * in an inode back reference are already in a directory and correctly
- * point to this inode
+ * See if a given name and sequence number found in an inode back reference are
+ * already in a directory and correctly point to this inode.
+ *
+ * Returns: < 0 on error, 0 if the directory entry does not exists and 1 if it
+ * exists.
  */
 static noinline int inode_in_dir(struct btrfs_root *root,
 				 struct btrfs_path *path,
@@ -905,29 +907,35 @@ static noinline int inode_in_dir(struct btrfs_root *root,
 {
 	struct btrfs_dir_item *di;
 	struct btrfs_key location;
-	int match = 0;
+	int ret = 0;
 
 	di = btrfs_lookup_dir_index_item(NULL, root, path, dirid,
 					 index, name, name_len, 0);
-	if (di && !IS_ERR(di)) {
+	if (IS_ERR(di)) {
+		if (PTR_ERR(di) != -ENOENT)
+			ret = PTR_ERR(di);
+		goto out;
+	} else if (di) {
 		btrfs_dir_item_key_to_cpu(path->nodes[0], di, &location);
 		if (location.objectid != objectid)
 			goto out;
-	} else
+	} else {
 		goto out;
-	btrfs_release_path(path);
+	}
 
+	btrfs_release_path(path);
 	di = btrfs_lookup_dir_item(NULL, root, path, dirid, name, name_len, 0);
-	if (di && !IS_ERR(di)) {
-		btrfs_dir_item_key_to_cpu(path->nodes[0], di, &location);
-		if (location.objectid != objectid)
-			goto out;
-	} else
+	if (IS_ERR(di)) {
+		ret = PTR_ERR(di);
 		goto out;
-	match = 1;
+	} else if (di) {
+		btrfs_dir_item_key_to_cpu(path->nodes[0], di, &location);
+		if (location.objectid == objectid)
+			ret = 1;
+	}
 out:
 	btrfs_release_path(path);
-	return match;
+	return ret;
 }
 
 /*
@@ -1477,10 +1485,12 @@ static noinline int add_inode_ref(struct btrfs_trans_handle *trans,
 		if (ret)
 			goto out;
 
-		/* if we already have a perfect match, we're done */
-		if (!inode_in_dir(root, path, btrfs_ino(BTRFS_I(dir)),
-					btrfs_ino(BTRFS_I(inode)), ref_index,
-					name, namelen)) {
+		ret = inode_in_dir(root, path, btrfs_ino(BTRFS_I(dir)),
+				   btrfs_ino(BTRFS_I(inode)), ref_index,
+				   name, namelen);
+		if (ret < 0) {
+			goto out;
+		} else if (ret == 0) {
 			/*
 			 * look for a conflicting back reference in the
 			 * metadata. if we find one we have to unlink that name
@@ -1538,6 +1548,7 @@ static noinline int add_inode_ref(struct btrfs_trans_handle *trans,
 
 			btrfs_update_inode(trans, root, inode);
 		}
+		/* Else, ret == 1, we already have a perfect match, we're done. */
 
 		ref_ptr = (unsigned long)(ref_ptr + ref_struct_size) + namelen;
 		kfree(name);
-- 
2.33.0

[PATCH 5.10 73/95] net: stmmac: add support for dwmac 3.40a

[Greg Kroah-Hartman]

From: Herve Codina <herve.codina@bootlin.com>

[ Upstream commit 9cb1d19f47fafad7dcf7c8564e633440c946cfd7 ]

dwmac 3.40a is an old ip version that can be found on SPEAr3xx soc.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c   | 1 +
 drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 8 ++++++++
 2 files changed, 9 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c
index fad503820e04..b3365b34cac7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c
@@ -71,6 +71,7 @@ err_remove_config_dt:
 
 static const struct of_device_id dwmac_generic_match[] = {
 	{ .compatible = "st,spear600-gmac"},
+	{ .compatible = "snps,dwmac-3.40a"},
 	{ .compatible = "snps,dwmac-3.50a"},
 	{ .compatible = "snps,dwmac-3.610"},
 	{ .compatible = "snps,dwmac-3.70a"},
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 53be8fc1d125..48186cd32ce1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -508,6 +508,14 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
 		plat->pmt = 1;
 	}
 
+	if (of_device_is_compatible(np, "snps,dwmac-3.40a")) {
+		plat->has_gmac = 1;
+		plat->enh_desc = 1;
+		plat->tx_coe = 1;
+		plat->bugged_jumbo = 1;
+		plat->pmt = 1;
+	}
+
 	if (of_device_is_compatible(np, "snps,dwmac-4.00") ||
 	    of_device_is_compatible(np, "snps,dwmac-4.10a") ||
 	    of_device_is_compatible(np, "snps,dwmac-4.20a") ||
-- 
2.33.0

[PATCH 5.10 74/95] ARM: dts: spear3xx: Fix gmac node

[Greg Kroah-Hartman]

From: Herve Codina <herve.codina@bootlin.com>

[ Upstream commit 6636fec29cdf6665bd219564609e8651f6ddc142 ]

On SPEAr3xx, ethernet driver is not compatible with the SPEAr600
one.
Indeed, SPEAr3xx uses an earlier version of this IP (v3.40) and
needs some driver tuning compare to SPEAr600.

The v3.40 IP support was added to stmmac driver and this patch
fixes this issue and use the correct compatible string for
SPEAr3xx

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/spear3xx.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi
index f266b7b03482..cc88ebe7a60c 100644
--- a/arch/arm/boot/dts/spear3xx.dtsi
+++ b/arch/arm/boot/dts/spear3xx.dtsi
@@ -47,7 +47,7 @@
 		};
 
 		gmac: eth@e0800000 {
-			compatible = "st,spear600-gmac";
+			compatible = "snps,dwmac-3.40a";
 			reg = <0xe0800000 0x8000>;
 			interrupts = <23 22>;
 			interrupt-names = "macirq", "eth_wake_irq";
-- 
2.33.0

[PATCH 5.10 75/95] isdn: mISDN: Fix sleeping function called from invalid context

[Greg Kroah-Hartman]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 6510e80a0b81b5d814e3aea6297ba42f5e76f73c ]

The driver can call card->isac.release() function from an atomic
context.

Fix this by calling this function after releasing the lock.

The following log reveals it:

[   44.168226 ] BUG: sleeping function called from invalid context at kernel/workqueue.c:3018
[   44.168941 ] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 5475, name: modprobe
[   44.169574 ] INFO: lockdep is turned off.
[   44.169899 ] irq event stamp: 0
[   44.170160 ] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
[   44.170627 ] hardirqs last disabled at (0): [<ffffffff814209ed>] copy_process+0x132d/0x3e00
[   44.171240 ] softirqs last  enabled at (0): [<ffffffff81420a1a>] copy_process+0x135a/0x3e00
[   44.171852 ] softirqs last disabled at (0): [<0000000000000000>] 0x0
[   44.172318 ] Preemption disabled at:
[   44.172320 ] [<ffffffffa009b0a9>] nj_release+0x69/0x500 [netjet]
[   44.174441 ] Call Trace:
[   44.174630 ]  dump_stack_lvl+0xa8/0xd1
[   44.174912 ]  dump_stack+0x15/0x17
[   44.175166 ]  ___might_sleep+0x3a2/0x510
[   44.175459 ]  ? nj_release+0x69/0x500 [netjet]
[   44.175791 ]  __might_sleep+0x82/0xe0
[   44.176063 ]  ? start_flush_work+0x20/0x7b0
[   44.176375 ]  start_flush_work+0x33/0x7b0
[   44.176672 ]  ? trace_irq_enable_rcuidle+0x85/0x170
[   44.177034 ]  ? kasan_quarantine_put+0xaa/0x1f0
[   44.177372 ]  ? kasan_quarantine_put+0xaa/0x1f0
[   44.177711 ]  __flush_work+0x11a/0x1a0
[   44.177991 ]  ? flush_work+0x20/0x20
[   44.178257 ]  ? lock_release+0x13c/0x8f0
[   44.178550 ]  ? __kasan_check_write+0x14/0x20
[   44.178872 ]  ? do_raw_spin_lock+0x148/0x360
[   44.179187 ]  ? read_lock_is_recursive+0x20/0x20
[   44.179530 ]  ? __kasan_check_read+0x11/0x20
[   44.179846 ]  ? do_raw_spin_unlock+0x55/0x900
[   44.180168 ]  ? ____kasan_slab_free+0x116/0x140
[   44.180505 ]  ? _raw_spin_unlock_irqrestore+0x41/0x60
[   44.180878 ]  ? skb_queue_purge+0x1a3/0x1c0
[   44.181189 ]  ? kfree+0x13e/0x290
[   44.181438 ]  flush_work+0x17/0x20
[   44.181695 ]  mISDN_freedchannel+0xe8/0x100
[   44.182006 ]  isac_release+0x210/0x260 [mISDNipac]
[   44.182366 ]  nj_release+0xf6/0x500 [netjet]
[   44.182685 ]  nj_remove+0x48/0x70 [netjet]
[   44.182989 ]  pci_device_remove+0xa9/0x250

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/hardware/mISDN/netjet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/isdn/hardware/mISDN/netjet.c b/drivers/isdn/hardware/mISDN/netjet.c
index 2a1ddd47a096..a52f275f8263 100644
--- a/drivers/isdn/hardware/mISDN/netjet.c
+++ b/drivers/isdn/hardware/mISDN/netjet.c
@@ -949,8 +949,8 @@ nj_release(struct tiger_hw *card)
 		nj_disable_hwirq(card);
 		mode_tiger(&card->bc[0], ISDN_P_NONE);
 		mode_tiger(&card->bc[1], ISDN_P_NONE);
-		card->isac.release(&card->isac);
 		spin_unlock_irqrestore(&card->lock, flags);
+		card->isac.release(&card->isac);
 		release_region(card->base, card->base_s);
 		card->base_s = 0;
 	}
-- 
2.33.0

[PATCH 5.10 76/95] platform/x86: intel_scu_ipc: Update timeout value in comment

[Greg Kroah-Hartman]

From: Prashant Malani <pmalani@chromium.org>

[ Upstream commit a0c5814b9933f25ecb6de169483c5b88cf632bca ]

The comment decribing the IPC timeout hadn't been updated when the
actual timeout was changed from 3 to 5 seconds in
commit a7d53dbbc70a ("platform/x86: intel_scu_ipc: Increase virtual
timeout from 3 to 5 seconds") .

Since the value is anyway updated to 10s now, take this opportunity to
update the value in the comment too.

Signed-off-by: Prashant Malani <pmalani@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20210928101932.2543937-4-pmalani@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel_scu_ipc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index 425d2064148f..69d706039cb2 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -247,7 +247,7 @@ static inline int busy_loop(struct intel_scu_ipc_dev *scu)
 	return -ETIMEDOUT;
 }
 
-/* Wait till ipc ioc interrupt is received or timeout in 3 HZ */
+/* Wait till ipc ioc interrupt is received or timeout in 10 HZ */
 static inline int ipc_wait_for_interrupt(struct intel_scu_ipc_dev *scu)
 {
 	int status;
-- 
2.33.0

[PATCH 5.10 77/95] ALSA: hda: avoid write to STATESTS if controller is in reset

[Greg Kroah-Hartman]

From: Kai Vehmanen <kai.vehmanen@linux.intel.com>

[ Upstream commit b37a15188eae9d4c49c5bb035e0c8d4058e4d9b3 ]

The snd_hdac_bus_reset_link() contains logic to clear STATESTS register
before performing controller reset. This code dates back to an old
bugfix in commit e8a7f136f5ed ("[ALSA] hda-intel - Improve HD-audio
codec probing robustness"). Originally the code was added to
azx_reset().

The code was moved around in commit a41d122449be ("ALSA: hda - Embed bus
into controller object") and ended up to snd_hdac_bus_reset_link() and
called primarily via snd_hdac_bus_init_chip().

The logic to clear STATESTS is correct when snd_hdac_bus_init_chip() is
called when controller is not in reset. In this case, STATESTS can be
cleared. This can be useful e.g. when forcing a controller reset to retry
codec probe. A normal non-power-on reset will not clear the bits.

However, this old logic is problematic when controller is already in
reset. The HDA specification states that controller must be taken out of
reset before writing to registers other than GCTL.CRST (1.0a spec,
3.3.7). The write to STATESTS in snd_hdac_bus_reset_link() will be lost
if the controller is already in reset per the HDA specification mentioned.

This has been harmless on older hardware. On newer generation of Intel
PCIe based HDA controllers, if configured to report issues, this write
will emit an unsupported request error. If ACPI Platform Error Interface
(APEI) is enabled in kernel, this will end up to kernel log.

Fix the code in snd_hdac_bus_reset_link() to only clear the STATESTS if
the function is called when controller is not in reset. Otherwise
clearing the bits is not possible and should be skipped.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211012142935.3731820-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/hda/hdac_controller.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/sound/hda/hdac_controller.c b/sound/hda/hdac_controller.c
index b98449fd92f3..522d1897659c 100644
--- a/sound/hda/hdac_controller.c
+++ b/sound/hda/hdac_controller.c
@@ -421,8 +421,9 @@ int snd_hdac_bus_reset_link(struct hdac_bus *bus, bool full_reset)
 	if (!full_reset)
 		goto skip_reset;
 
-	/* clear STATESTS */
-	snd_hdac_chip_writew(bus, STATESTS, STATESTS_INT_MASK);
+	/* clear STATESTS if not in reset */
+	if (snd_hdac_chip_readb(bus, GCTL) & AZX_GCTL_RESET)
+		snd_hdac_chip_writew(bus, STATESTS, STATESTS_INT_MASK);
 
 	/* reset controller */
 	snd_hdac_bus_enter_link_reset(bus);
-- 
2.33.0

[PATCH 5.10 78/95] libperf tests: Fix test_stat_cpu

[Greg Kroah-Hartman]

From: Shunsuke Nakamura <nakamura.shun@fujitsu.com>

[ Upstream commit 3ff6d64e68abc231955d216236615918797614ae ]

The `cpu` argument of perf_evsel__read() must specify the cpu index.

perf_cpu_map__for_each_cpu() is for iterating the cpu number (not index)
and is thus not appropriate for use with perf_evsel__read().

So, if there is an offline CPU, the cpu number specified in the argument
may point out of range because the cpu number and the cpu index are
different.

Fix test_stat_cpu().

Testing it:

  # make tests -C tools/lib/perf/
  make: Entering directory '/home/nakamura/kernel_src/linux-5.15-rc4_fix/tools/lib/perf'
  running static:
  - running tests/test-cpumap.c...OK
  - running tests/test-threadmap.c...OK
  - running tests/test-evlist.c...OK
  - running tests/test-evsel.c...OK
  running dynamic:
  - running tests/test-cpumap.c...OK
  - running tests/test-threadmap.c...OK
  - running tests/test-evlist.c...OK
  - running tests/test-evsel.c...OK
  make: Leaving directory '/home/nakamura/kernel_src/linux-5.15-rc4_fix/tools/lib/perf'

Signed-off-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20211011083704.4108720-1-nakamura.shun@fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/perf/tests/test-evlist.c | 6 +++---
 tools/lib/perf/tests/test-evsel.c  | 6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/tools/lib/perf/tests/test-evlist.c b/tools/lib/perf/tests/test-evlist.c
index bd19cabddaf6..60b5d1801103 100644
--- a/tools/lib/perf/tests/test-evlist.c
+++ b/tools/lib/perf/tests/test-evlist.c
@@ -38,7 +38,7 @@ static int test_stat_cpu(void)
 		.type	= PERF_TYPE_SOFTWARE,
 		.config	= PERF_COUNT_SW_TASK_CLOCK,
 	};
-	int err, cpu, tmp;
+	int err, idx;
 
 	cpus = perf_cpu_map__new(NULL);
 	__T("failed to create cpus", cpus);
@@ -64,10 +64,10 @@ static int test_stat_cpu(void)
 	perf_evlist__for_each_evsel(evlist, evsel) {
 		cpus = perf_evsel__cpus(evsel);
 
-		perf_cpu_map__for_each_cpu(cpu, tmp, cpus) {
+		for (idx = 0; idx < perf_cpu_map__nr(cpus); idx++) {
 			struct perf_counts_values counts = { .val = 0 };
 
-			perf_evsel__read(evsel, cpu, 0, &counts);
+			perf_evsel__read(evsel, idx, 0, &counts);
 			__T("failed to read value for evsel", counts.val != 0);
 		}
 	}
diff --git a/tools/lib/perf/tests/test-evsel.c b/tools/lib/perf/tests/test-evsel.c
index 0ad82d7a2a51..2de98768d844 100644
--- a/tools/lib/perf/tests/test-evsel.c
+++ b/tools/lib/perf/tests/test-evsel.c
@@ -21,7 +21,7 @@ static int test_stat_cpu(void)
 		.type	= PERF_TYPE_SOFTWARE,
 		.config	= PERF_COUNT_SW_CPU_CLOCK,
 	};
-	int err, cpu, tmp;
+	int err, idx;
 
 	cpus = perf_cpu_map__new(NULL);
 	__T("failed to create cpus", cpus);
@@ -32,10 +32,10 @@ static int test_stat_cpu(void)
 	err = perf_evsel__open(evsel, cpus, NULL);
 	__T("failed to open evsel", err == 0);
 
-	perf_cpu_map__for_each_cpu(cpu, tmp, cpus) {
+	for (idx = 0; idx < perf_cpu_map__nr(cpus); idx++) {
 		struct perf_counts_values counts = { .val = 0 };
 
-		perf_evsel__read(evsel, cpu, 0, &counts);
+		perf_evsel__read(evsel, idx, 0, &counts);
 		__T("failed to read value for evsel", counts.val != 0);
 	}
 
-- 
2.33.0

[PATCH 5.10 79/95] perf/x86/msr: Add Sapphire Rapids CPU support

[Greg Kroah-Hartman]

From: Kan Liang <kan.liang@linux.intel.com>

[ Upstream commit 71920ea97d6d1d800ee8b51951dc3fda3f5dc698 ]

SMI_COUNT MSR is supported on Sapphire Rapids CPU.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1633551137-192083-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/msr.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/events/msr.c b/arch/x86/events/msr.c
index 4be8f9cabd07..ca8ce64df2ce 100644
--- a/arch/x86/events/msr.c
+++ b/arch/x86/events/msr.c
@@ -68,6 +68,7 @@ static bool test_intel(int idx, void *data)
 	case INTEL_FAM6_BROADWELL_D:
 	case INTEL_FAM6_BROADWELL_G:
 	case INTEL_FAM6_BROADWELL_X:
+	case INTEL_FAM6_SAPPHIRERAPIDS_X:
 
 	case INTEL_FAM6_ATOM_SILVERMONT:
 	case INTEL_FAM6_ATOM_SILVERMONT_D:
-- 
2.33.0

[PATCH 5.10 80/95] Input: snvs_pwrkey - add clk handling

[Greg Kroah-Hartman]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit d997cc1715df7b6c3df798881fb9941acf0079f8 ]

On i.MX7S and i.MX8M* (but not i.MX6*) the pwrkey device has an
associated clock. Accessing the registers requires that this clock is
enabled. Binding the driver on at least i.MX7S and i.MX8MP while not
having the clock enabled results in a complete hang of the machine.
(This usually only happens if snvs_pwrkey is built as a module and the
rtc-snvs driver isn't already bound because at bootup the required clk
is on and only gets disabled when the clk framework disables unused clks
late during boot.)

This completes the fix in commit 135be16d3505 ("ARM: dts: imx7s: add
snvs clock to pwrkey").

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211013062848.2667192-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/keyboard/snvs_pwrkey.c | 29 ++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c
index 2f5e3ab5ed63..65286762b02a 100644
--- a/drivers/input/keyboard/snvs_pwrkey.c
+++ b/drivers/input/keyboard/snvs_pwrkey.c
@@ -3,6 +3,7 @@
 // Driver for the IMX SNVS ON/OFF Power Key
 // Copyright (C) 2015 Freescale Semiconductor, Inc. All Rights Reserved.
 
+#include <linux/clk.h>
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/init.h>
@@ -99,6 +100,11 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static void imx_snvs_pwrkey_disable_clk(void *data)
+{
+	clk_disable_unprepare(data);
+}
+
 static void imx_snvs_pwrkey_act(void *pdata)
 {
 	struct pwrkey_drv_data *pd = pdata;
@@ -111,6 +117,7 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
 	struct pwrkey_drv_data *pdata;
 	struct input_dev *input;
 	struct device_node *np;
+	struct clk *clk;
 	int error;
 	u32 vid;
 
@@ -134,6 +141,28 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
 		dev_warn(&pdev->dev, "KEY_POWER without setting in dts\n");
 	}
 
+	clk = devm_clk_get_optional(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "Failed to get snvs clock (%pe)\n", clk);
+		return PTR_ERR(clk);
+	}
+
+	error = clk_prepare_enable(clk);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to enable snvs clock (%pe)\n",
+			ERR_PTR(error));
+		return error;
+	}
+
+	error = devm_add_action_or_reset(&pdev->dev,
+					 imx_snvs_pwrkey_disable_clk, clk);
+	if (error) {
+		dev_err(&pdev->dev,
+			"Failed to register clock cleanup handler (%pe)\n",
+			ERR_PTR(error));
+		return error;
+	}
+
 	pdata->wakeup = of_property_read_bool(np, "wakeup-source");
 
 	pdata->irq = platform_get_irq(pdev, 0);
-- 
2.33.0

[PATCH 5.10 81/95] scsi: iscsi: Fix set_param() handling

[Greg Kroah-Hartman]

From: Mike Christie <michael.christie@oracle.com>

[ Upstream commit 187a580c9e7895978dcd1e627b9c9e7e3d13ca96 ]

In commit 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and
sync thread") we meant to add a check where before we call ->set_param() we
make sure the iscsi_cls_connection is bound. The problem is that between
versions 4 and 5 of the patch the deletion of the unchecked set_param()
call was dropped so we ended up with 2 calls. As a result we can still hit
a crash where we access the unbound connection on the first call.

This patch removes that first call.

Fixes: 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and sync thread")
Link: https://lore.kernel.org/r/20211010161904.60471-1-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Li Feng <fengli@smartx.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_transport_iscsi.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 41772b88610a..3f7fa8de3642 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -2907,8 +2907,6 @@ iscsi_set_param(struct iscsi_transport *transport, struct iscsi_uevent *ev)
 			session->recovery_tmo = value;
 		break;
 	default:
-		err = transport->set_param(conn, ev->u.set_param.param,
-					   data, ev->u.set_param.len);
 		if ((conn->state == ISCSI_CONN_BOUND) ||
 			(conn->state == ISCSI_CONN_UP)) {
 			err = transport->set_param(conn, ev->u.set_param.param,
-- 
2.33.0

[PATCH 5.10 82/95] scsi: qla2xxx: Fix a memory leak in an error path of qla2x00_process_els()

[Greg Kroah-Hartman]

From: Joy Gu <jgu@purestorage.com>

[ Upstream commit 7fb223d0ad801f633c78cbe42b1d1b55f5d163ad ]

Commit 8c0eb596baa5 ("[SCSI] qla2xxx: Fix a memory leak in an error path of
qla2x00_process_els()"), intended to change:

        bsg_job->request->msgcode == FC_BSG_HST_ELS_NOLOGIN

to:

        bsg_job->request->msgcode != FC_BSG_RPT_ELS

but changed it to:

        bsg_job->request->msgcode == FC_BSG_RPT_ELS

instead.

Change the == to a != to avoid leaking the fcport structure or freeing
unallocated memory.

Link: https://lore.kernel.org/r/20211012191834.90306-2-jgu@purestorage.com
Fixes: 8c0eb596baa5 ("[SCSI] qla2xxx: Fix a memory leak in an error path of qla2x00_process_els()")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Joy Gu <jgu@purestorage.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_bsg.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index 7fa085969a63..1fd292a6ac88 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -414,7 +414,7 @@ done_unmap_sg:
 	goto done_free_fcport;
 
 done_free_fcport:
-	if (bsg_request->msgcode == FC_BSG_RPT_ELS)
+	if (bsg_request->msgcode != FC_BSG_RPT_ELS)
 		qla2x00_free_fcport(fcport);
 done:
 	return rval;
-- 
2.33.0

[PATCH 5.10 83/95] sched/scs: Reset the shadow stack when idle_task_exit

[Greg Kroah-Hartman]

From: Woody Lin <woodylin@google.com>

[ Upstream commit 63acd42c0d4942f74710b11c38602fb14dea7320 ]

Commit f1a0a376ca0c ("sched/core: Initialize the idle task with
preemption disabled") removed the init_idle() call from
idle_thread_get(). This was the sole call-path on hotplug that resets
the Shadow Call Stack (scs) Stack Pointer (sp).

Not resetting the scs-sp leads to scs overflow after enough hotplug
cycles. Therefore add an explicit scs_task_reset() to the hotplug code
to make sure the scs-sp does get reset on hotplug.

Fixes: f1a0a376ca0c ("sched/core: Initialize the idle task with preemption disabled")
Signed-off-by: Woody Lin <woodylin@google.com>
[peterz: Changelog]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lore.kernel.org/r/20211012083521.973587-1-woodylin@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 6db20a66e8e6..e4551d1736fa 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -6677,6 +6677,7 @@ void idle_task_exit(void)
 		finish_arch_post_lock_switch();
 	}
 
+	scs_task_reset(current);
 	/* finish_cpu(), as ran on the BP, will clean up the active_mm state */
 }
 
-- 
2.33.0

[PATCH 5.10 84/95] net: hns3: fix for miscalculation of rx unused desc

[Greg Kroah-Hartman]

From: Yunsheng Lin <linyunsheng@huawei.com>

[ Upstream commit 9f9f0f19994b42b3e5e8735d41b9c5136828a76c ]

rx unused desc is the desc that need attatching new buffer
before refilling to hw to receive new packet, the number of
desc need attatching new buffer is calculated using next_to_use
and next_to_clean. when next_to_use == next_to_clean, currently
hns3 driver assumes that all the desc has the buffer attatched,
but 'next_to_use == next_to_clean' also means all the desc need
attatching new buffer if hw has comsumed all the desc and the
driver has not attatched any buffer to the desc yet.

This patch adds 'refill' in desc_cb to indicate whether a new
buffer has been refilled to a desc.

Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 8 ++++++++
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 1 +
 2 files changed, 9 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 568ac6b321fa..ae7cd73c823b 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -2421,6 +2421,7 @@ static void hns3_buffer_detach(struct hns3_enet_ring *ring, int i)
 {
 	hns3_unmap_buffer(ring, &ring->desc_cb[i]);
 	ring->desc[i].addr = 0;
+	ring->desc_cb[i].refill = 0;
 }
 
 static void hns3_free_buffer_detach(struct hns3_enet_ring *ring, int i,
@@ -2498,6 +2499,7 @@ static int hns3_alloc_and_attach_buffer(struct hns3_enet_ring *ring, int i)
 		return ret;
 
 	ring->desc[i].addr = cpu_to_le64(ring->desc_cb[i].dma);
+	ring->desc_cb[i].refill = 1;
 
 	return 0;
 }
@@ -2528,12 +2530,14 @@ static void hns3_replace_buffer(struct hns3_enet_ring *ring, int i,
 	hns3_unmap_buffer(ring, &ring->desc_cb[i]);
 	ring->desc_cb[i] = *res_cb;
 	ring->desc[i].addr = cpu_to_le64(ring->desc_cb[i].dma);
+	ring->desc_cb[i].refill = 1;
 	ring->desc[i].rx.bd_base_info = 0;
 }
 
 static void hns3_reuse_buffer(struct hns3_enet_ring *ring, int i)
 {
 	ring->desc_cb[i].reuse_flag = 0;
+	ring->desc_cb[i].refill = 1;
 	ring->desc[i].addr = cpu_to_le64(ring->desc_cb[i].dma +
 					 ring->desc_cb[i].page_offset);
 	ring->desc[i].rx.bd_base_info = 0;
@@ -2631,6 +2635,9 @@ static int hns3_desc_unused(struct hns3_enet_ring *ring)
 	int ntc = ring->next_to_clean;
 	int ntu = ring->next_to_use;
 
+	if (unlikely(ntc == ntu && !ring->desc_cb[ntc].refill))
+		return ring->desc_num;
+
 	return ((ntc >= ntu) ? 0 : ring->desc_num) + ntc - ntu;
 }
 
@@ -2907,6 +2914,7 @@ static void hns3_rx_ring_move_fw(struct hns3_enet_ring *ring)
 {
 	ring->desc[ring->next_to_clean].rx.bd_base_info &=
 		cpu_to_le32(~BIT(HNS3_RXD_VLD_B));
+	ring->desc_cb[ring->next_to_clean].refill = 0;
 	ring->next_to_clean += 1;
 
 	if (unlikely(ring->next_to_clean == ring->desc_num))
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
index a8ad7ccae20e..54d02ea4aaa7 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
@@ -283,6 +283,7 @@ struct hns3_desc_cb {
 	u32 length;     /* length of the buffer */
 
 	u16 reuse_flag;
+	u16 refill;
 
 	/* desc type, used by the ring user to mark the type of the priv data */
 	u16 type;
-- 
2.33.0

[PATCH 5.10 85/95] scsi: core: Fix shost->cmd_per_lun calculation in scsi_add_host_with_dma()

[Greg Kroah-Hartman]

From: Dexuan Cui <decui@microsoft.com>

commit 50b6cb3516365cb69753b006be2b61c966b70588 upstream.

After commit ea2f0f77538c ("scsi: core: Cap scsi_host cmd_per_lun at
can_queue"), a 416-CPU VM running on Hyper-V hangs during boot because the
hv_storvsc driver sets scsi_driver.can_queue to an integer value that
exceeds SHRT_MAX, and hence scsi_add_host_with_dma() sets
shost->cmd_per_lun to a negative "short" value.

Use min_t(int, ...) to work around the issue.

Link: https://lore.kernel.org/r/20211008043546.6006-1-decui@microsoft.com
Fixes: ea2f0f77538c ("scsi: core: Cap scsi_host cmd_per_lun at can_queue")
Cc: stable@vger.kernel.org
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/hosts.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -220,7 +220,8 @@ int scsi_add_host_with_dma(struct Scsi_H
 		goto fail;
 	}
 
-	shost->cmd_per_lun = min_t(short, shost->cmd_per_lun,
+	/* Use min_t(int, ...) in case shost->can_queue exceeds SHRT_MAX */
+	shost->cmd_per_lun = min_t(int, shost->cmd_per_lun,
 				   shost->can_queue);
 
 	error = scsi_init_sense_cache(shost);

[PATCH 5.10 86/95] can: isotp: isotp_sendmsg(): fix TX buffer concurrent access in isotp_sendmsg()

[Greg Kroah-Hartman]

From: Ziyang Xuan <william.xuanziyang@huawei.com>

commit 43a08c3bdac4cb42eff8fe5e2278bffe0c5c3daa upstream.

When isotp_sendmsg() concurrent, tx.state of all TX processes can be
ISOTP_IDLE. The conditions so->tx.state != ISOTP_IDLE and
wq_has_sleeper(&so->wait) can not protect TX buffer from being
accessed by multiple TX processes.

We can use cmpxchg() to try to modify tx.state to ISOTP_SENDING firstly.
If the modification of the previous process succeed, the later process
must wait tx.state to ISOTP_IDLE firstly. Thus, we can ensure TX buffer
is accessed by only one process at the same time. And we should also
restore the original tx.state at the subsequent error processes.

Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/all/c2517874fbdf4188585cf9ddf67a8fa74d5dbde5.1633764159.git.william.xuanziyang@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/can/isotp.c |   40 +++++++++++++++++++++++++++-------------
 1 file changed, 27 insertions(+), 13 deletions(-)

--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -121,7 +121,7 @@ enum {
 struct tpcon {
 	int idx;
 	int len;
-	u8 state;
+	u32 state;
 	u8 bs;
 	u8 sn;
 	u8 ll_dl;
@@ -846,6 +846,7 @@ static int isotp_sendmsg(struct socket *
 {
 	struct sock *sk = sock->sk;
 	struct isotp_sock *so = isotp_sk(sk);
+	u32 old_state = so->tx.state;
 	struct sk_buff *skb;
 	struct net_device *dev;
 	struct canfd_frame *cf;
@@ -858,39 +859,45 @@ static int isotp_sendmsg(struct socket *
 		return -EADDRNOTAVAIL;
 
 	/* we do not support multiple buffers - for now */
-	if (so->tx.state != ISOTP_IDLE || wq_has_sleeper(&so->wait)) {
-		if (msg->msg_flags & MSG_DONTWAIT)
-			return -EAGAIN;
+	if (cmpxchg(&so->tx.state, ISOTP_IDLE, ISOTP_SENDING) != ISOTP_IDLE ||
+	    wq_has_sleeper(&so->wait)) {
+		if (msg->msg_flags & MSG_DONTWAIT) {
+			err = -EAGAIN;
+			goto err_out;
+		}
 
 		/* wait for complete transmission of current pdu */
 		err = wait_event_interruptible(so->wait, so->tx.state == ISOTP_IDLE);
 		if (err)
-			return err;
+			goto err_out;
 	}
 
-	if (!size || size > MAX_MSG_LENGTH)
-		return -EINVAL;
+	if (!size || size > MAX_MSG_LENGTH) {
+		err = -EINVAL;
+		goto err_out;
+	}
 
 	err = memcpy_from_msg(so->tx.buf, msg, size);
 	if (err < 0)
-		return err;
+		goto err_out;
 
 	dev = dev_get_by_index(sock_net(sk), so->ifindex);
-	if (!dev)
-		return -ENXIO;
+	if (!dev) {
+		err = -ENXIO;
+		goto err_out;
+	}
 
 	skb = sock_alloc_send_skb(sk, so->ll.mtu + sizeof(struct can_skb_priv),
 				  msg->msg_flags & MSG_DONTWAIT, &err);
 	if (!skb) {
 		dev_put(dev);
-		return err;
+		goto err_out;
 	}
 
 	can_skb_reserve(skb);
 	can_skb_prv(skb)->ifindex = dev->ifindex;
 	can_skb_prv(skb)->skbcnt = 0;
 
-	so->tx.state = ISOTP_SENDING;
 	so->tx.len = size;
 	so->tx.idx = 0;
 
@@ -949,7 +956,7 @@ static int isotp_sendmsg(struct socket *
 	if (err) {
 		pr_notice_once("can-isotp: %s: can_send_ret %d\n",
 			       __func__, err);
-		return err;
+		goto err_out;
 	}
 
 	if (wait_tx_done) {
@@ -961,6 +968,13 @@ static int isotp_sendmsg(struct socket *
 	}
 
 	return size;
+
+err_out:
+	so->tx.state = old_state;
+	if (so->tx.state == ISOTP_IDLE)
+		wake_up_interruptible(&so->wait);
+
+	return err;
 }
 
 static int isotp_recvmsg(struct socket *sock, struct msghdr *msg, size_t size,

[PATCH 5.10 87/95] s390/pci: fix zpci_zdev_put() on reserve

[Greg Kroah-Hartman]

From: Niklas Schnelle <schnelle@linux.ibm.com>

commit a46044a92add6a400f4dada7b943b30221f7cc80 upstream.

Since commit 2a671f77ee49 ("s390/pci: fix use after free of zpci_dev")
the reference count of a zpci_dev is incremented between
pcibios_add_device() and pcibios_release_device() which was supposed to
prevent the zpci_dev from being freed while the common PCI code has
access to it. It was missed however that the handling of zPCI
availability events assumed that once zpci_zdev_put() was called no
later availability event would still see the device. With the previously
mentioned commit however this assumption no longer holds and we must
make sure that we only drop the initial long-lived reference the zPCI
subsystem holds exactly once.

Do so by introducing a zpci_device_reserved() function that handles when
a device is reserved. Here we make sure the zpci_dev will not be
considered for further events by removing it from the zpci_list.

This also means that the device actually stays in the
ZPCI_FN_STATE_RESERVED state between the time we know it has been
reserved and the final reference going away. We thus need to consider it
a real state instead of just a conceptual state after the removal. The
final cleanup of PCI resources, removal from zbus, and destruction of
the IOMMU stays in zpci_release_device() to make sure holders of the
reference do see valid data until the release.

Fixes: 2a671f77ee49 ("s390/pci: fix use after free of zpci_dev")
Cc: stable@vger.kernel.org
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/include/asm/pci.h        |    3 ++
 arch/s390/pci/pci.c                |   45 ++++++++++++++++++++++++++++++++-----
 arch/s390/pci/pci_event.c          |    4 +--
 drivers/pci/hotplug/s390_pci_hpc.c |    9 -------
 4 files changed, 46 insertions(+), 15 deletions(-)

--- a/arch/s390/include/asm/pci.h
+++ b/arch/s390/include/asm/pci.h
@@ -205,6 +205,9 @@ int zpci_create_device(u32 fid, u32 fh,
 void zpci_remove_device(struct zpci_dev *zdev, bool set_error);
 int zpci_enable_device(struct zpci_dev *);
 int zpci_disable_device(struct zpci_dev *);
+void zpci_device_reserved(struct zpci_dev *zdev);
+bool zpci_is_device_configured(struct zpci_dev *zdev);
+
 int zpci_register_ioat(struct zpci_dev *, u8, u64, u64, u64);
 int zpci_unregister_ioat(struct zpci_dev *, u8);
 void zpci_remove_reserved_devices(void);
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -92,7 +92,7 @@ void zpci_remove_reserved_devices(void)
 	spin_unlock(&zpci_list_lock);
 
 	list_for_each_entry_safe(zdev, tmp, &remove, entry)
-		zpci_zdev_put(zdev);
+		zpci_device_reserved(zdev);
 }
 
 int pci_domain_nr(struct pci_bus *bus)
@@ -787,6 +787,39 @@ error:
 	return rc;
 }
 
+bool zpci_is_device_configured(struct zpci_dev *zdev)
+{
+	enum zpci_state state = zdev->state;
+
+	return state != ZPCI_FN_STATE_RESERVED &&
+		state != ZPCI_FN_STATE_STANDBY;
+}
+
+/**
+ * zpci_device_reserved() - Mark device as resverved
+ * @zdev: the zpci_dev that was reserved
+ *
+ * Handle the case that a given zPCI function was reserved by another system.
+ * After a call to this function the zpci_dev can not be found via
+ * get_zdev_by_fid() anymore but may still be accessible via existing
+ * references though it will not be functional anymore.
+ */
+void zpci_device_reserved(struct zpci_dev *zdev)
+{
+	if (zdev->has_hp_slot)
+		zpci_exit_slot(zdev);
+	/*
+	 * Remove device from zpci_list as it is going away. This also
+	 * makes sure we ignore subsequent zPCI events for this device.
+	 */
+	spin_lock(&zpci_list_lock);
+	list_del(&zdev->entry);
+	spin_unlock(&zpci_list_lock);
+	zdev->state = ZPCI_FN_STATE_RESERVED;
+	zpci_dbg(3, "rsv fid:%x\n", zdev->fid);
+	zpci_zdev_put(zdev);
+}
+
 void zpci_release_device(struct kref *kref)
 {
 	struct zpci_dev *zdev = container_of(kref, struct zpci_dev, kref);
@@ -802,6 +835,12 @@ void zpci_release_device(struct kref *kr
 	case ZPCI_FN_STATE_STANDBY:
 		if (zdev->has_hp_slot)
 			zpci_exit_slot(zdev);
+		spin_lock(&zpci_list_lock);
+		list_del(&zdev->entry);
+		spin_unlock(&zpci_list_lock);
+		zpci_dbg(3, "rsv fid:%x\n", zdev->fid);
+		fallthrough;
+	case ZPCI_FN_STATE_RESERVED:
 		zpci_cleanup_bus_resources(zdev);
 		zpci_bus_device_unregister(zdev);
 		zpci_destroy_iommu(zdev);
@@ -809,10 +848,6 @@ void zpci_release_device(struct kref *kr
 	default:
 		break;
 	}
-
-	spin_lock(&zpci_list_lock);
-	list_del(&zdev->entry);
-	spin_unlock(&zpci_list_lock);
 	zpci_dbg(3, "rem fid:%x\n", zdev->fid);
 	kfree(zdev);
 }
--- a/arch/s390/pci/pci_event.c
+++ b/arch/s390/pci/pci_event.c
@@ -146,7 +146,7 @@ static void __zpci_event_availability(st
 		zdev->state = ZPCI_FN_STATE_STANDBY;
 		if (!clp_get_state(ccdf->fid, &state) &&
 		    state == ZPCI_FN_STATE_RESERVED) {
-			zpci_zdev_put(zdev);
+			zpci_device_reserved(zdev);
 		}
 		break;
 	case 0x0306: /* 0x308 or 0x302 for multiple devices */
@@ -156,7 +156,7 @@ static void __zpci_event_availability(st
 	case 0x0308: /* Standby -> Reserved */
 		if (!zdev)
 			break;
-		zpci_zdev_put(zdev);
+		zpci_device_reserved(zdev);
 		break;
 	default:
 		break;
--- a/drivers/pci/hotplug/s390_pci_hpc.c
+++ b/drivers/pci/hotplug/s390_pci_hpc.c
@@ -109,14 +109,7 @@ static int get_power_status(struct hotpl
 	struct zpci_dev *zdev = container_of(hotplug_slot, struct zpci_dev,
 					     hotplug_slot);
 
-	switch (zdev->state) {
-	case ZPCI_FN_STATE_STANDBY:
-		*value = 0;
-		break;
-	default:
-		*value = 1;
-		break;
-	}
+	*value = zpci_is_device_configured(zdev) ? 1 : 0;
 	return 0;
 }
 

[PATCH 5.10 88/95] bpf, test, cgroup: Use sk_{alloc,free} for test cases

[Greg Kroah-Hartman]

From: Daniel Borkmann <daniel@iogearbox.net>

commit 435b08ec0094ac1e128afe6cfd0d9311a8c617a7 upstream.

BPF test infra has some hacks in place which kzalloc() a socket and perform
minimum init via sock_net_set() and sock_init_data(). As a result, the sk's
skcd->cgroup is NULL since it didn't go through proper initialization as it
would have been the case from sk_alloc(). Rather than re-adding a NULL test
in sock_cgroup_ptr() just for this, use sk_{alloc,free}() pair for the test
socket. The latter also allows to get rid of the bpf_sk_storage_free() special
case.

Fixes: 8520e224f547 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode")
Fixes: b7a1848e8398 ("bpf: add BPF_PROG_TEST_RUN support for flow dissector")
Fixes: 2cb494a36c98 ("bpf: add tests for direct packet access from CGROUP_SKB")
Reported-by: syzbot+664b58e9a40fbb2cec71@syzkaller.appspotmail.com
Reported-by: syzbot+33f36d0754d4c5c0e102@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: syzbot+664b58e9a40fbb2cec71@syzkaller.appspotmail.com
Tested-by: syzbot+33f36d0754d4c5c0e102@syzkaller.appspotmail.com
Link: https://lore.kernel.org/bpf/20210927123921.21535-2-daniel@iogearbox.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bpf/test_run.c |   14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

--- a/net/bpf/test_run.c
+++ b/net/bpf/test_run.c
@@ -481,6 +481,12 @@ static void convert_skb_to___skb(struct
 	__skb->gso_segs = skb_shinfo(skb)->gso_segs;
 }
 
+static struct proto bpf_dummy_proto = {
+	.name   = "bpf_dummy",
+	.owner  = THIS_MODULE,
+	.obj_size = sizeof(struct sock),
+};
+
 int bpf_prog_test_run_skb(struct bpf_prog *prog, const union bpf_attr *kattr,
 			  union bpf_attr __user *uattr)
 {
@@ -525,20 +531,19 @@ int bpf_prog_test_run_skb(struct bpf_pro
 		break;
 	}
 
-	sk = kzalloc(sizeof(struct sock), GFP_USER);
+	sk = sk_alloc(net, AF_UNSPEC, GFP_USER, &bpf_dummy_proto, 1);
 	if (!sk) {
 		kfree(data);
 		kfree(ctx);
 		return -ENOMEM;
 	}
-	sock_net_set(sk, net);
 	sock_init_data(NULL, sk);
 
 	skb = build_skb(data, 0);
 	if (!skb) {
 		kfree(data);
 		kfree(ctx);
-		kfree(sk);
+		sk_free(sk);
 		return -ENOMEM;
 	}
 	skb->sk = sk;
@@ -611,8 +616,7 @@ out:
 	if (dev && dev != net->loopback_dev)
 		dev_put(dev);
 	kfree_skb(skb);
-	bpf_sk_storage_free(sk);
-	kfree(sk);
+	sk_free(sk);
 	kfree(ctx);
 	return ret;
 }

[PATCH 5.10 89/95] usbnet: sanity check for maxpacket

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

commit 397430b50a363d8b7bdda00522123f82df6adc5e upstream.

maxpacket of 0 makes no sense and oopses as we need to divide
by it. Give up.

V2: fixed typo in log and stylistic issues

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: syzbot+76bb1d34ffa0adc03baa@syzkaller.appspotmail.com
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211021122944.21816-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/usbnet.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1755,6 +1755,10 @@ usbnet_probe (struct usb_interface *udev
 	if (!dev->rx_urb_size)
 		dev->rx_urb_size = dev->hard_mtu;
 	dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
+	if (dev->maxpacket == 0) {
+		/* that is a broken device */
+		goto out4;
+	}
 
 	/* let userspace know we have a random address */
 	if (ether_addr_equal(net->dev_addr, node_id))

[PATCH 5.10 90/95] net: mdiobus: Fix memory leak in __mdiobus_register

[Greg Kroah-Hartman]

From: Yanfei Xu <yanfei.xu@windriver.com>

commit ab609f25d19858513919369ff3d9a63c02cd9e2e upstream.

Once device_register() failed, we should call put_device() to
decrement reference count for cleanup. Or it will cause memory
leak.

BUG: memory leak
unreferenced object 0xffff888114032e00 (size 256):
  comm "kworker/1:3", pid 2960, jiffies 4294943572 (age 15.920s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 08 2e 03 14 81 88 ff ff  ................
    08 2e 03 14 81 88 ff ff 90 76 65 82 ff ff ff ff  .........ve.....
  backtrace:
    [<ffffffff8265cfab>] kmalloc include/linux/slab.h:591 [inline]
    [<ffffffff8265cfab>] kzalloc include/linux/slab.h:721 [inline]
    [<ffffffff8265cfab>] device_private_init drivers/base/core.c:3203 [inline]
    [<ffffffff8265cfab>] device_add+0x89b/0xdf0 drivers/base/core.c:3253
    [<ffffffff828dd643>] __mdiobus_register+0xc3/0x450 drivers/net/phy/mdio_bus.c:537
    [<ffffffff828cb835>] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87
    [<ffffffff82b92a00>] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline]
    [<ffffffff82b92a00>] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786
    [<ffffffff82baa33f>] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745
    [<ffffffff82c36e17>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
    [<ffffffff82661d17>] call_driver_probe drivers/base/dd.c:517 [inline]
    [<ffffffff82661d17>] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596
    [<ffffffff826620bc>] really_probe drivers/base/dd.c:558 [inline]
    [<ffffffff826620bc>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751
    [<ffffffff826621ba>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781
    [<ffffffff82662a26>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898
    [<ffffffff8265eca7>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427
    [<ffffffff826625a2>] __device_attach+0x122/0x260 drivers/base/dd.c:969
    [<ffffffff82660916>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487
    [<ffffffff8265cd0b>] device_add+0x5fb/0xdf0 drivers/base/core.c:3359
    [<ffffffff82c343b9>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2170
    [<ffffffff82c4473c>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238

BUG: memory leak
unreferenced object 0xffff888116f06900 (size 32):
  comm "kworker/0:2", pid 2670, jiffies 4294944448 (age 7.160s)
  hex dump (first 32 bytes):
    75 73 62 2d 30 30 31 3a 30 30 33 00 00 00 00 00  usb-001:003.....
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff81484516>] kstrdup+0x36/0x70 mm/util.c:60
    [<ffffffff814845a3>] kstrdup_const+0x53/0x80 mm/util.c:83
    [<ffffffff82296ba2>] kvasprintf_const+0xc2/0x110 lib/kasprintf.c:48
    [<ffffffff82358d4b>] kobject_set_name_vargs+0x3b/0xe0 lib/kobject.c:289
    [<ffffffff826575f3>] dev_set_name+0x63/0x90 drivers/base/core.c:3147
    [<ffffffff828dd63b>] __mdiobus_register+0xbb/0x450 drivers/net/phy/mdio_bus.c:535
    [<ffffffff828cb835>] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87
    [<ffffffff82b92a00>] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline]
    [<ffffffff82b92a00>] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786
    [<ffffffff82baa33f>] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745
    [<ffffffff82c36e17>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
    [<ffffffff82661d17>] call_driver_probe drivers/base/dd.c:517 [inline]
    [<ffffffff82661d17>] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596
    [<ffffffff826620bc>] really_probe drivers/base/dd.c:558 [inline]
    [<ffffffff826620bc>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751
    [<ffffffff826621ba>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781
    [<ffffffff82662a26>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898
    [<ffffffff8265eca7>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427
    [<ffffffff826625a2>] __device_attach+0x122/0x260 drivers/base/dd.c:969

Reported-by: syzbot+398e7dc692ddbbb4cfec@syzkaller.appspotmail.com
Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/mdio_bus.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -544,6 +544,7 @@ int __mdiobus_register(struct mii_bus *b
 	err = device_register(&bus->dev);
 	if (err) {
 		pr_err("mii_bus %s failed to register\n", bus->id);
+		put_device(&bus->dev);
 		return -EINVAL;
 	}
 

[PATCH 5.10 91/95] tracing: Have all levels of checks prevent recursion

[Greg Kroah-Hartman]

From: Steven Rostedt (VMware) <rostedt@goodmis.org>

commit ed65df63a39a3f6ed04f7258de8b6789e5021c18 upstream.

While writing an email explaining the "bit = 0" logic for a discussion on
making ftrace_test_recursion_trylock() disable preemption, I discovered a
path that makes the "not do the logic if bit is zero" unsafe.

The recursion logic is done in hot paths like the function tracer. Thus,
any code executed causes noticeable overhead. Thus, tricks are done to try
to limit the amount of code executed. This included the recursion testing
logic.

Having recursion testing is important, as there are many paths that can
end up in an infinite recursion cycle when tracing every function in the
kernel. Thus protection is needed to prevent that from happening.

Because it is OK to recurse due to different running context levels (e.g.
an interrupt preempts a trace, and then a trace occurs in the interrupt
handler), a set of bits are used to know which context one is in (normal,
softirq, irq and NMI). If a recursion occurs in the same level, it is
prevented*.

Then there are infrastructure levels of recursion as well. When more than
one callback is attached to the same function to trace, it calls a loop
function to iterate over all the callbacks. Both the callbacks and the
loop function have recursion protection. The callbacks use the
"ftrace_test_recursion_trylock()" which has a "function" set of context
bits to test, and the loop function calls the internal
trace_test_and_set_recursion() directly, with an "internal" set of bits.

If an architecture does not implement all the features supported by ftrace
then the callbacks are never called directly, and the loop function is
called instead, which will implement the features of ftrace.

Since both the loop function and the callbacks do recursion protection, it
was seemed unnecessary to do it in both locations. Thus, a trick was made
to have the internal set of recursion bits at a more significant bit
location than the function bits. Then, if any of the higher bits were set,
the logic of the function bits could be skipped, as any new recursion
would first have to go through the loop function.

This is true for architectures that do not support all the ftrace
features, because all functions being traced must first go through the
loop function before going to the callbacks. But this is not true for
architectures that support all the ftrace features. That's because the
loop function could be called due to two callbacks attached to the same
function, but then a recursion function inside the callback could be
called that does not share any other callback, and it will be called
directly.

i.e.

 traced_function_1: [ more than one callback tracing it ]
   call loop_func

 loop_func:
   trace_recursion set internal bit
   call callback

 callback:
   trace_recursion [ skipped because internal bit is set, return 0 ]
   call traced_function_2

 traced_function_2: [ only traced by above callback ]
   call callback

 callback:
   trace_recursion [ skipped because internal bit is set, return 0 ]
   call traced_function_2

 [ wash, rinse, repeat, BOOM! out of shampoo! ]

Thus, the "bit == 0 skip" trick is not safe, unless the loop function is
call for all functions.

Since we want to encourage architectures to implement all ftrace features,
having them slow down due to this extra logic may encourage the
maintainers to update to the latest ftrace features. And because this
logic is only safe for them, remove it completely.

 [*] There is on layer of recursion that is allowed, and that is to allow
     for the transition between interrupt context (normal -> softirq ->
     irq -> NMI), because a trace may occur before the context update is
     visible to the trace recursion logic.

Link: https://lore.kernel.org/all/609b565a-ed6e-a1da-f025-166691b5d994@linux.alibaba.com/
Link: https://lkml.kernel.org/r/20211018154412.09fcad3c@gandalf.local.home

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@hansenpartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Jisheng Zhang <jszhang@kernel.org>
Cc: =?utf-8?b?546L6LSH?= <yun.wang@linux.alibaba.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: stable@vger.kernel.org
Fixes: edc15cafcbfa3 ("tracing: Avoid unnecessary multiple recursion checks")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/ftrace.c          |    4 +-
 kernel/trace/trace.h           |   61 +++++++++++++----------------------------
 kernel/trace/trace_functions.c |    2 -
 3 files changed, 23 insertions(+), 44 deletions(-)

--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -6985,7 +6985,7 @@ __ftrace_ops_list_func(unsigned long ip,
 	struct ftrace_ops *op;
 	int bit;
 
-	bit = trace_test_and_set_recursion(TRACE_LIST_START, TRACE_LIST_MAX);
+	bit = trace_test_and_set_recursion(TRACE_LIST_START);
 	if (bit < 0)
 		return;
 
@@ -7060,7 +7060,7 @@ static void ftrace_ops_assist_func(unsig
 {
 	int bit;
 
-	bit = trace_test_and_set_recursion(TRACE_LIST_START, TRACE_LIST_MAX);
+	bit = trace_test_and_set_recursion(TRACE_LIST_START);
 	if (bit < 0)
 		return;
 
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -573,18 +573,6 @@ struct tracer {
  *    then this function calls...
  *   The function callback, which can use the FTRACE bits to
  *    check for recursion.
- *
- * Now if the arch does not support a feature, and it calls
- * the global list function which calls the ftrace callback
- * all three of these steps will do a recursion protection.
- * There's no reason to do one if the previous caller already
- * did. The recursion that we are protecting against will
- * go through the same steps again.
- *
- * To prevent the multiple recursion checks, if a recursion
- * bit is set that is higher than the MAX bit of the current
- * check, then we know that the check was made by the previous
- * caller, and we can skip the current check.
  */
 enum {
 	/* Function recursion bits */
@@ -592,12 +580,14 @@ enum {
 	TRACE_FTRACE_NMI_BIT,
 	TRACE_FTRACE_IRQ_BIT,
 	TRACE_FTRACE_SIRQ_BIT,
+	TRACE_FTRACE_TRANSITION_BIT,
 
-	/* INTERNAL_BITs must be greater than FTRACE_BITs */
+	/* Internal use recursion bits */
 	TRACE_INTERNAL_BIT,
 	TRACE_INTERNAL_NMI_BIT,
 	TRACE_INTERNAL_IRQ_BIT,
 	TRACE_INTERNAL_SIRQ_BIT,
+	TRACE_INTERNAL_TRANSITION_BIT,
 
 	TRACE_BRANCH_BIT,
 /*
@@ -637,12 +627,6 @@ enum {
 	 * function is called to clear it.
 	 */
 	TRACE_GRAPH_NOTRACE_BIT,
-
-	/*
-	 * When transitioning between context, the preempt_count() may
-	 * not be correct. Allow for a single recursion to cover this case.
-	 */
-	TRACE_TRANSITION_BIT,
 };
 
 #define trace_recursion_set(bit)	do { (current)->trace_recursion |= (1<<(bit)); } while (0)
@@ -662,12 +646,18 @@ enum {
 #define TRACE_CONTEXT_BITS	4
 
 #define TRACE_FTRACE_START	TRACE_FTRACE_BIT
-#define TRACE_FTRACE_MAX	((1 << (TRACE_FTRACE_START + TRACE_CONTEXT_BITS)) - 1)
 
 #define TRACE_LIST_START	TRACE_INTERNAL_BIT
-#define TRACE_LIST_MAX		((1 << (TRACE_LIST_START + TRACE_CONTEXT_BITS)) - 1)
 
-#define TRACE_CONTEXT_MASK	TRACE_LIST_MAX
+#define TRACE_CONTEXT_MASK	((1 << (TRACE_LIST_START + TRACE_CONTEXT_BITS)) - 1)
+
+enum {
+	TRACE_CTX_NMI,
+	TRACE_CTX_IRQ,
+	TRACE_CTX_SOFTIRQ,
+	TRACE_CTX_NORMAL,
+	TRACE_CTX_TRANSITION,
+};
 
 static __always_inline int trace_get_context_bit(void)
 {
@@ -675,59 +665,48 @@ static __always_inline int trace_get_con
 
 	if (in_interrupt()) {
 		if (in_nmi())
-			bit = 0;
+			bit = TRACE_CTX_NMI;
 
 		else if (in_irq())
-			bit = 1;
+			bit = TRACE_CTX_IRQ;
 		else
-			bit = 2;
+			bit = TRACE_CTX_SOFTIRQ;
 	} else
-		bit = 3;
+		bit = TRACE_CTX_NORMAL;
 
 	return bit;
 }
 
-static __always_inline int trace_test_and_set_recursion(int start, int max)
+static __always_inline int trace_test_and_set_recursion(int start)
 {
 	unsigned int val = current->trace_recursion;
 	int bit;
 
-	/* A previous recursion check was made */
-	if ((val & TRACE_CONTEXT_MASK) > max)
-		return 0;
-
 	bit = trace_get_context_bit() + start;
 	if (unlikely(val & (1 << bit))) {
 		/*
 		 * It could be that preempt_count has not been updated during
 		 * a switch between contexts. Allow for a single recursion.
 		 */
-		bit = TRACE_TRANSITION_BIT;
+		bit = start + TRACE_CTX_TRANSITION;
 		if (trace_recursion_test(bit))
 			return -1;
 		trace_recursion_set(bit);
 		barrier();
-		return bit + 1;
+		return bit;
 	}
 
-	/* Normal check passed, clear the transition to allow it again */
-	trace_recursion_clear(TRACE_TRANSITION_BIT);
-
 	val |= 1 << bit;
 	current->trace_recursion = val;
 	barrier();
 
-	return bit + 1;
+	return bit;
 }
 
 static __always_inline void trace_clear_recursion(int bit)
 {
 	unsigned int val = current->trace_recursion;
 
-	if (!bit)
-		return;
-
-	bit--;
 	bit = 1 << bit;
 	val &= ~bit;
 
--- a/kernel/trace/trace_functions.c
+++ b/kernel/trace/trace_functions.c
@@ -144,7 +144,7 @@ function_trace_call(unsigned long ip, un
 	pc = preempt_count();
 	preempt_disable_notrace();
 
-	bit = trace_test_and_set_recursion(TRACE_FTRACE_START, TRACE_FTRACE_MAX);
+	bit = trace_test_and_set_recursion(TRACE_FTRACE_START);
 	if (bit < 0)
 		goto out;
 

[PATCH 5.10 92/95] e1000e: Separate TGP board type from SPT

[Greg Kroah-Hartman]

From: Sasha Neftin <sasha.neftin@intel.com>

[ Upstream commit 280db5d420090a24e4e41f9ddcbf37920a598572 ]

We have the same LAN controller on different PCHs. Separate TGP board
type from SPT which will allow for specific fixes to be applied for
TGP platforms.

Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Mark Pearson <markpearson@lenovo.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e1000e/e1000.h   |  4 ++-
 drivers/net/ethernet/intel/e1000e/ich8lan.c | 20 ++++++++++++++
 drivers/net/ethernet/intel/e1000e/netdev.c  | 29 +++++++++++----------
 3 files changed, 38 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index 5b2143f4b1f8..3178efd98006 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -113,7 +113,8 @@ enum e1000_boards {
 	board_pch2lan,
 	board_pch_lpt,
 	board_pch_spt,
-	board_pch_cnp
+	board_pch_cnp,
+	board_pch_tgp
 };
 
 struct e1000_ps_page {
@@ -499,6 +500,7 @@ extern const struct e1000_info e1000_pch2_info;
 extern const struct e1000_info e1000_pch_lpt_info;
 extern const struct e1000_info e1000_pch_spt_info;
 extern const struct e1000_info e1000_pch_cnp_info;
+extern const struct e1000_info e1000_pch_tgp_info;
 extern const struct e1000_info e1000_es2_info;
 
 void e1000e_ptp_init(struct e1000_adapter *adapter);
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 3cbb8d1ed67f..b38b914f9ac6 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -5999,3 +5999,23 @@ const struct e1000_info e1000_pch_cnp_info = {
 	.phy_ops		= &ich8_phy_ops,
 	.nvm_ops		= &spt_nvm_ops,
 };
+
+const struct e1000_info e1000_pch_tgp_info = {
+	.mac			= e1000_pch_tgp,
+	.flags			= FLAG_IS_ICH
+				  | FLAG_HAS_WOL
+				  | FLAG_HAS_HW_TIMESTAMP
+				  | FLAG_HAS_CTRLEXT_ON_LOAD
+				  | FLAG_HAS_AMT
+				  | FLAG_HAS_FLASH
+				  | FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_APME_IN_WUC,
+	.flags2			= FLAG2_HAS_PHY_STATS
+				  | FLAG2_HAS_EEE,
+	.pba			= 26,
+	.max_hw_frame_size	= 9022,
+	.get_variants		= e1000_get_variants_ich8lan,
+	.mac_ops		= &ich8_mac_ops,
+	.phy_ops		= &ich8_phy_ops,
+	.nvm_ops		= &spt_nvm_ops,
+};
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 361b8d0bd78d..d0c4de023112 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -50,6 +50,7 @@ static const struct e1000_info *e1000_info_tbl[] = {
 	[board_pch_lpt]		= &e1000_pch_lpt_info,
 	[board_pch_spt]		= &e1000_pch_spt_info,
 	[board_pch_cnp]		= &e1000_pch_cnp_info,
+	[board_pch_tgp]		= &e1000_pch_tgp_info,
 };
 
 struct e1000_reg_info {
@@ -7837,20 +7838,20 @@ static const struct pci_device_id e1000_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CMP_I219_V11), board_pch_cnp },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CMP_I219_LM12), board_pch_spt },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CMP_I219_V12), board_pch_spt },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_LM13), board_pch_cnp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_V13), board_pch_cnp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_LM14), board_pch_cnp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_V14), board_pch_cnp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_LM15), board_pch_cnp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_V15), board_pch_cnp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_LM16), board_pch_cnp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_V16), board_pch_cnp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_LM17), board_pch_cnp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_V17), board_pch_cnp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_LM18), board_pch_cnp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_V18), board_pch_cnp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_LM19), board_pch_cnp },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_V19), board_pch_cnp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_LM13), board_pch_tgp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_V13), board_pch_tgp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_LM14), board_pch_tgp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_V14), board_pch_tgp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_LM15), board_pch_tgp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_V15), board_pch_tgp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_LM16), board_pch_tgp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_V16), board_pch_tgp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_LM17), board_pch_tgp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_V17), board_pch_tgp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_LM18), board_pch_tgp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_V18), board_pch_tgp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_LM19), board_pch_tgp },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_V19), board_pch_tgp },
 
 	{ 0, 0, 0, 0, 0, 0, 0 }	/* terminate list */
 };
-- 
2.33.0

[PATCH 5.10 93/95] selftests: bpf: fix backported ASSERT_FALSE

[Greg Kroah-Hartman]

From: Lorenz Bauer <lmb@cloudflare.com>

Commit 183d9ebd449c ("selftests/bpf: Fix core_reloc test runner") causes
builds of selftests/bpf to fail on 5.10.y since the branch doesn't have the
ASSERT_FALSE macro yet. Replace ASSERT_FALSE with ASSERT_EQ.

Fixes: 183d9ebd449c ("selftests/bpf: Fix core_reloc test runner")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/bpf/prog_tests/core_reloc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/testing/selftests/bpf/prog_tests/core_reloc.c
+++ b/tools/testing/selftests/bpf/prog_tests/core_reloc.c
@@ -857,7 +857,7 @@ void test_core_reloc(void)
 			goto cleanup;
 		}
 
-		if (!ASSERT_FALSE(test_case->fails, "obj_load_should_fail"))
+		if (!ASSERT_EQ(test_case->fails, false, "obj_load_should_fail"))
 			goto cleanup;
 
 		equal = memcmp(data->out, test_case->output,

[PATCH 5.10 94/95] ARM: 9122/1: select HAVE_FUTEX_CMPXCHG

[Greg Kroah-Hartman]

From: Nick Desaulniers <ndesaulniers@google.com>

commit 9d417cbe36eee7afdd85c2e871685f8dab7c2dba upstream.

tglx notes:
  This function [futex_detect_cmpxchg] is only needed when an
  architecture has to runtime discover whether the CPU supports it or
  not.  ARM has unconditional support for this, so the obvious thing to
  do is the below.

Fixes linkage failure from Clang randconfigs:
kernel/futex.o:(.text.fixup+0x5c): relocation truncated to fit: R_ARM_JUMP24 against `.init.text'
and boot failures for CONFIG_THUMB2_KERNEL.

Link: https://github.com/ClangBuiltLinux/linux/issues/325

Comments from Nick Desaulniers:

 See-also: 03b8c7b623c8 ("futex: Allow architectures to skip
 futex_atomic_cmpxchg_inatomic() test")

Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org # v3.14+
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -87,6 +87,7 @@ config ARM
 	select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
 	select HAVE_FUNCTION_GRAPH_TRACER if !THUMB2_KERNEL && !CC_IS_CLANG
 	select HAVE_FUNCTION_TRACER if !XIP_KERNEL
+	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_GCC_PLUGINS
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)
 	select HAVE_IDE if PCI || ISA || PCMCIA

[PATCH 5.10 95/95] pinctrl: stm32: use valid pin identifier in stm32_pinctrl_resume()

[Greg Kroah-Hartman]

From: Fabien Dessenne <fabien.dessenne@foss.st.com>

commit c370bb474016ab9edfdabd7c08a88dd13a71ddbd upstream.

When resuming from low power, the driver attempts to restore the
configuration of some pins. This is done by a call to:
  stm32_pinctrl_restore_gpio_regs(struct stm32_pinctrl *pctl, u32 pin)
where 'pin' must be a valid pin value (i.e. matching some 'groups->pin').
Fix the current implementation which uses some wrong 'pin' value.

Fixes: e2f3cf18c3e2 ("pinctrl: stm32: add suspend/resume management")
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Link: https://lore.kernel.org/r/20211008122517.617633-1-fabien.dessenne@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pinctrl/stm32/pinctrl-stm32.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -1645,8 +1645,8 @@ int __maybe_unused stm32_pinctrl_resume(
 	struct stm32_pinctrl_group *g = pctl->groups;
 	int i;
 
-	for (i = g->pin; i < g->pin + pctl->ngroups; i++)
-		stm32_pinctrl_restore_gpio_regs(pctl, i);
+	for (i = 0; i < pctl->ngroups; i++, g++)
+		stm32_pinctrl_restore_gpio_regs(pctl, g->pin);
 
 	return 0;
 }

Re: [PATCH 5.10 70/95] gcc-plugins/structleak: add makefile var for disabling structleak

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1040 bytes --]

Hi!

> [ Upstream commit 554afc3b9797511e3245864e32aebeb6abbab1e3 ]
> 
> KUnit and structleak don't play nice, so add a makefile variable for
> enabling structleak when it complains.

AFAICT, this patch does nothing useful in 5.10. Unlike mainline,
DISABLE_STRUCTLEAK_PLUGIN is not used elsewhere in the tree.

Best regards,
							Pavel
							
> +++ b/scripts/Makefile.gcc-plugins
> @@ -19,6 +19,10 @@ gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF)		\
>  		+= -fplugin-arg-structleak_plugin-byref
>  gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL)	\
>  		+= -fplugin-arg-structleak_plugin-byref-all
> +ifdef CONFIG_GCC_PLUGIN_STRUCTLEAK
> +    DISABLE_STRUCTLEAK_PLUGIN += -fplugin-arg-structleak_plugin-disable
> +endif
> +export DISABLE_STRUCTLEAK_PLUGIN
>  gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_STRUCTLEAK)		\
>  		+= -DSTRUCTLEAK_PLUGIN
>  
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 5.10 70/95] gcc-plugins/structleak: add makefile var for disabling structleak

[Brendan Higgins]

On Mon, Oct 25, 2021 at 1:56 PM Pavel Machek <pavel@denx.de> wrote:
>
> Hi!
>
> > [ Upstream commit 554afc3b9797511e3245864e32aebeb6abbab1e3 ]
> >
> > KUnit and structleak don't play nice, so add a makefile variable for
> > enabling structleak when it complains.
>
> AFAICT, this patch does nothing useful in 5.10. Unlike mainline,
> DISABLE_STRUCTLEAK_PLUGIN is not used elsewhere in the tree.

The related patches that Greg picked up use this makefile variable.

Cheers

> Best regards,
>                                                         Pavel
>
> > +++ b/scripts/Makefile.gcc-plugins
> > @@ -19,6 +19,10 @@ gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF)            \
> >               += -fplugin-arg-structleak_plugin-byref
> >  gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL)  \
> >               += -fplugin-arg-structleak_plugin-byref-all
> > +ifdef CONFIG_GCC_PLUGIN_STRUCTLEAK
> > +    DISABLE_STRUCTLEAK_PLUGIN += -fplugin-arg-structleak_plugin-disable
> > +endif
> > +export DISABLE_STRUCTLEAK_PLUGIN
> >  gcc-plugin-cflags-$(CONFIG_GCC_PLUGIN_STRUCTLEAK)            \
> >               += -DSTRUCTLEAK_PLUGIN
> >
> --
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

Re: [PATCH 5.10 00/95] 5.10.76-rc1 review

[Florian Fainelli]

On 10/25/21 12:13 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.76 release.
> There are 95 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 27 Oct 2021 19:07:44 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.76-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.10 00/95] 5.10.76-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 660 bytes --]

Hi!

> This is the start of the stable review cycle for the 5.10.76 release.
> There are 95 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 5.10 70/95] gcc-plugins/structleak: add makefile var for disabling structleak

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1077 bytes --]

Hi!

> > > [ Upstream commit 554afc3b9797511e3245864e32aebeb6abbab1e3 ]
> > >
> > > KUnit and structleak don't play nice, so add a makefile variable for
> > > enabling structleak when it complains.
> >
> > AFAICT, this patch does nothing useful in 5.10. Unlike mainline,
> > DISABLE_STRUCTLEAK_PLUGIN is not used elsewhere in the tree.
> 
> The related patches that Greg picked up use this makefile variable.

I don't think so, not in 5.10. Can you double-check?

pavel@duo:~/cip/krc$ grep -ri DISABLE_STRUCTLEAK_PLUGIN .
./scripts/Makefile.gcc-plugins:    DISABLE_STRUCTLEAK_PLUGIN += -fplugin-arg-structleak_plugin-disable
./scripts/Makefile.gcc-plugins:export DISABLE_STRUCTLEAK_PLUGIN
pavel@duo:~/cip/krc$ 
commit b67ee9a213819f2c817e3d344c2fc186f299a4f5 (HEAD, origin/queue/5.10)
Author: Fabien Dessenne <fabien.dessenne@foss.st.com>
Date:   Fri Oct 8 14:25:17 2021 +0200

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 5.10 00/95] 5.10.76-rc1 review

[Shuah Khan]

On 10/25/21 1:13 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.76 release.
> There are 95 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 27 Oct 2021 19:07:44 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.76-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

RE: [PATCH 5.10 00/95] 5.10.76-rc1 review

[Fox Chen]

On Mon, 25 Oct 2021 21:13:57 +0200, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 5.10.76 release.
> There are 95 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 27 Oct 2021 19:07:44 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.76-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

5.10.76-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
                
Tested-by: Fox Chen <foxhlchen@gmail.com>

Re: [PATCH 5.10 00/95] 5.10.76-rc1 review

[Naresh Kamboju]

On Tue, 26 Oct 2021 at 01:01, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.10.76 release.
> There are 95 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 27 Oct 2021 19:07:44 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.76-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.10.76-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.10.y
* git commit: e2430f94799e6bf1f96aeaca998817fed82e9afe
* git describe: v5.10.75-96-ge2430f94799e
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.75-96-ge2430f94799e

## No regressions (compared to v5.10.75-88-g629133650a80)

## No fixes (compared to v5.10.75-88-g629133650a80)

## Test result summary
total: 88300, pass: 74672, fail: 525, skip: 12272, xfail: 831

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 289 total, 289 passed, 0 failed
* arm64: 39 total, 39 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 38 total, 38 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 37 total, 37 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 36 total, 36 passed, 0 failed
* riscv: 24 total, 24 passed, 0 failed
* s390: 18 total, 18 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 39 total, 39 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.10 00/95] 5.10.76-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Mon, Oct 25, 2021 at 09:13:57PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.76 release.
> There are 95 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 27 Oct 2021 19:07:44 +0000.
> Anything received after that time might be too late.

Build test:
mips (gcc version 11.2.1 20211012): 63 configs -> no new failure
arm (gcc version 11.2.1 20211012): 105 configs -> no new failure
arm64 (gcc version 11.2.1 20211012): 3 configs -> no failure
x86_64 (gcc version 10.2.1 20210110): 4 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]

[1]. https://openqa.qa.codethink.co.uk/tests/310
[2]. https://openqa.qa.codethink.co.uk/tests/307


Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip

Re: [PATCH 5.10 00/95] 5.10.76-rc1 review

[Guenter Roeck]

On Mon, Oct 25, 2021 at 09:13:57PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.76 release.
> There are 95 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 27 Oct 2021 19:07:44 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 159 pass: 159 fail: 0
Qemu test results:
	total: 472 pass: 472 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter