linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
To: Jiri Kosina <jikos@kernel.org>
Cc: "Ash Logan" <ash@heyquark.com>,
	linux-input@vger.kernel.org,
	"Jonathan Neuschäfer" <j.ne@posteo.net>,
	"Barnabás Pőcze" <pobrn@protonmail.com>,
	"Benjamin Tissoires" <benjamin.tissoires@redhat.com>,
	linux-kernel@vger.kernel.org,
	"Daniel J . Ogorchock" <djogorchock@gmail.com>,
	"Emmanuel Gil Peyrot" <linkmauve@linkmauve.fr>
Subject: [PATCH v5 2/5] HID: nintendo: drc: add support for the Wii U gamepad
Date: Wed, 27 Oct 2021 12:10:40 +0200	[thread overview]
Message-ID: <20211027101043.31609-3-linkmauve@linkmauve.fr> (raw)
In-Reply-To: <20211027101043.31609-1-linkmauve@linkmauve.fr>

From: Ash Logan <ash@heyquark.com>

This driver is for the DRC (gamepad) of the Wii U when wirelessly
connected to the DRH of the console, an internal chip exposing it as a
USB device.

This first patch exposes the buttons and sticks of this device, so that
it can act as a plain game controller.

The report format has been described by the libdrc folks at:
https://libdrc.org/docs/re/sc-input.html

Signed-off-by: Ash Logan <ash@heyquark.com>
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
---
 drivers/hid/Kconfig             |   8 +
 drivers/hid/Makefile            |   1 +
 drivers/hid/hid-ids.h           |   1 +
 drivers/hid/hid-nintendo-wiiu.c | 267 ++++++++++++++++++++++++++++++++
 drivers/hid/hid-nintendo.c      |  21 ++-
 drivers/hid/hid-nintendo.h      |   6 +
 drivers/hid/hid-quirks.c        |   3 +
 7 files changed, 304 insertions(+), 3 deletions(-)
 create mode 100644 drivers/hid/hid-nintendo-wiiu.c

diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 17ed06f5a23c..6bcc0d181cc4 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -749,6 +749,14 @@ config NINTENDO_FF
 	controller. For the pro controller, both rumble motors can be controlled
 	individually.
 
+config HID_NINTENDO_WIIU
+	tristate "Nintendo Wii U gamepad (DRC) over internal DRH"
+	default n
+	depends on HID_NINTENDO
+	help
+	  Support for the Wii U gamepad, when connected with the Wii U’s
+	  internal DRH chip.
+
 config HID_NINTENDO_SWITCH
 	tristate "Nintendo Wii U gamepad (DRC) over internal DRH"
 	default y
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index a0a9ee182ef2..f9851a7acea9 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -79,6 +79,7 @@ obj-$(CONFIG_HID_MICROSOFT)	+= hid-microsoft.o
 obj-$(CONFIG_HID_MONTEREY)	+= hid-monterey.o
 obj-$(CONFIG_HID_MULTITOUCH)	+= hid-multitouch.o
 obj-$(CONFIG_HID_NINTENDO)	+= hid-nintendo.o
+obj-$(CONFIG_HID_NINTENDO_WIIU)	+= hid-nintendo-wiiu.o
 obj-$(CONFIG_HID_NINTENDO_SWITCH)	+= hid-nintendo-switch.o
 obj-$(CONFIG_HID_NTI)			+= hid-nti.o
 obj-$(CONFIG_HID_NTRIG)		+= hid-ntrig.o
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index dc8f2f402464..30ce4287c48b 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -917,6 +917,7 @@
 #define USB_VENDOR_ID_NINTENDO		0x057e
 #define USB_DEVICE_ID_NINTENDO_WIIMOTE	0x0306
 #define USB_DEVICE_ID_NINTENDO_WIIMOTE2	0x0330
+#define USB_DEVICE_ID_NINTENDO_WIIU_DRH	0x0341
 #define USB_DEVICE_ID_NINTENDO_JOYCONL	0x2006
 #define USB_DEVICE_ID_NINTENDO_JOYCONR	0x2007
 #define USB_DEVICE_ID_NINTENDO_PROCON	0x2009
diff --git a/drivers/hid/hid-nintendo-wiiu.c b/drivers/hid/hid-nintendo-wiiu.c
new file mode 100644
index 000000000000..0b9df62587ed
--- /dev/null
+++ b/drivers/hid/hid-nintendo-wiiu.c
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * HID driver for Nintendo Wii U gamepad (DRC), connected via console-internal DRH
+ *
+ * Copyright (C) 2021 Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
+ * Copyright (C) 2019 Ash Logan <ash@heyquark.com>
+ * Copyright (C) 2013 Mema Hacking
+ *
+ * Based on the excellent work at http://libdrc.org/docs/re/sc-input.html and
+ * https://bitbucket.org/memahaxx/libdrc/src/master/src/input-receiver.cpp .
+ * libdrc code is licensed under BSD 2-Clause.
+ * Driver based on hid-udraw-ps3.c.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/input.h>
+#include <linux/minmax.h>
+#include <linux/module.h>
+#include "hid-ids.h"
+#include "hid-nintendo.h"
+
+#define DEVICE_NAME	"Nintendo Wii U gamepad (DRC)"
+
+/* Button and stick constants */
+#define VOLUME_MIN	0
+#define VOLUME_MAX	255
+#define NUM_STICK_AXES	4
+#define STICK_MIN	900
+#define STICK_MAX	3200
+
+#define BUTTON_SYNC	BIT(0)
+#define BUTTON_HOME	BIT(1)
+#define BUTTON_MINUS	BIT(2)
+#define BUTTON_PLUS	BIT(3)
+#define BUTTON_R	BIT(4)
+#define BUTTON_L	BIT(5)
+#define BUTTON_ZR	BIT(6)
+#define BUTTON_ZL	BIT(7)
+#define BUTTON_DOWN	BIT(8)
+#define BUTTON_UP	BIT(9)
+#define BUTTON_RIGHT	BIT(10)
+#define BUTTON_LEFT	BIT(11)
+#define BUTTON_Y	BIT(12)
+#define BUTTON_X	BIT(13)
+#define BUTTON_B	BIT(14)
+#define BUTTON_A	BIT(15)
+
+#define BUTTON_TV	BIT(21)
+#define BUTTON_R3	BIT(22)
+#define BUTTON_L3	BIT(23)
+
+#define BUTTON_POWER	BIT(25)
+
+/*
+ * The device is setup with multiple input devices:
+ * - A joypad with the buttons and sticks.
+ */
+
+struct drc {
+	enum nintendo_driver driver;
+	struct hid_device *hdev;
+	struct input_dev *joy_input_dev;
+};
+
+/*
+ * The format of this report has been reversed by the libdrc project, the
+ * documentation can be found here:
+ * https://libdrc.org/docs/re/sc-input.html
+ *
+ * We receive this report from USB, but it is actually formed on the DRC, the
+ * DRH only retransmits it over USB.
+ */
+int wiiu_hid_event(struct hid_device *hdev, struct hid_report *report,
+		   u8 *data, int len)
+{
+	struct drc *drc = hid_get_drvdata(hdev);
+	int i;
+	u32 buttons;
+
+	if (len != 128)
+		return -EINVAL;
+
+	buttons = (data[4] << 24) | (data[80] << 16) | (data[2] << 8) | data[3];
+	/* joypad */
+	input_report_key(drc->joy_input_dev, BTN_DPAD_RIGHT, buttons & BUTTON_RIGHT);
+	input_report_key(drc->joy_input_dev, BTN_DPAD_DOWN, buttons & BUTTON_DOWN);
+	input_report_key(drc->joy_input_dev, BTN_DPAD_LEFT, buttons & BUTTON_LEFT);
+	input_report_key(drc->joy_input_dev, BTN_DPAD_UP, buttons & BUTTON_UP);
+
+	input_report_key(drc->joy_input_dev, BTN_EAST, buttons & BUTTON_A);
+	input_report_key(drc->joy_input_dev, BTN_SOUTH, buttons & BUTTON_B);
+	input_report_key(drc->joy_input_dev, BTN_NORTH, buttons & BUTTON_X);
+	input_report_key(drc->joy_input_dev, BTN_WEST, buttons & BUTTON_Y);
+
+	input_report_key(drc->joy_input_dev, BTN_TL, buttons & BUTTON_L);
+	input_report_key(drc->joy_input_dev, BTN_TL2, buttons & BUTTON_ZL);
+	input_report_key(drc->joy_input_dev, BTN_TR, buttons & BUTTON_R);
+	input_report_key(drc->joy_input_dev, BTN_TR2, buttons & BUTTON_ZR);
+
+	input_report_key(drc->joy_input_dev, BTN_Z, buttons & BUTTON_TV);
+	input_report_key(drc->joy_input_dev, BTN_THUMBL, buttons & BUTTON_L3);
+	input_report_key(drc->joy_input_dev, BTN_THUMBR, buttons & BUTTON_R3);
+
+	input_report_key(drc->joy_input_dev, BTN_SELECT, buttons & BUTTON_MINUS);
+	input_report_key(drc->joy_input_dev, BTN_START, buttons & BUTTON_PLUS);
+	input_report_key(drc->joy_input_dev, BTN_MODE, buttons & BUTTON_HOME);
+
+	input_report_key(drc->joy_input_dev, BTN_DEAD, buttons & BUTTON_POWER);
+
+	for (i = 0; i < NUM_STICK_AXES; i++) {
+		s16 val = (data[7 + 2*i] << 8) | data[6 + 2*i];
+
+		val = clamp(val, (s16)STICK_MIN, (s16)STICK_MAX);
+
+		switch (i) {
+		case 0:
+			input_report_abs(drc->joy_input_dev, ABS_X, val);
+			break;
+		case 1:
+			input_report_abs(drc->joy_input_dev, ABS_Y, val);
+			break;
+		case 2:
+			input_report_abs(drc->joy_input_dev, ABS_RX, val);
+			break;
+		case 3:
+			input_report_abs(drc->joy_input_dev, ABS_RY, val);
+			break;
+		default:
+			break;
+		}
+	}
+
+	input_report_abs(drc->joy_input_dev, ABS_VOLUME, data[14]);
+	input_sync(drc->joy_input_dev);
+
+	/* let hidraw and hiddev handle the report */
+	return 0;
+}
+
+static int drc_open(struct input_dev *dev)
+{
+	struct drc *drc = input_get_drvdata(dev);
+
+	return hid_hw_open(drc->hdev);
+}
+
+static void drc_close(struct input_dev *dev)
+{
+	struct drc *drc = input_get_drvdata(dev);
+
+	hid_hw_close(drc->hdev);
+}
+
+static struct input_dev *allocate_and_setup(struct hid_device *hdev,
+					    const char *name)
+{
+	struct input_dev *input_dev;
+
+	input_dev = devm_input_allocate_device(&hdev->dev);
+	if (!input_dev)
+		return NULL;
+
+	input_dev->name = name;
+	input_dev->phys = hdev->phys;
+	input_dev->dev.parent = &hdev->dev;
+	input_dev->open = drc_open;
+	input_dev->close = drc_close;
+	input_dev->uniq = hdev->uniq;
+	input_dev->id.bustype = hdev->bus;
+	input_dev->id.vendor  = hdev->vendor;
+	input_dev->id.product = hdev->product;
+	input_dev->id.version = hdev->version;
+	input_set_drvdata(input_dev, hid_get_drvdata(hdev));
+
+	return input_dev;
+}
+
+static bool drc_setup_joypad(struct drc *drc,
+			     struct hid_device *hdev)
+{
+	struct input_dev *input_dev;
+
+	input_dev = allocate_and_setup(hdev, DEVICE_NAME " buttons and sticks");
+	if (!input_dev)
+		return false;
+
+	drc->joy_input_dev = input_dev;
+
+	input_set_capability(input_dev, EV_KEY, BTN_DPAD_RIGHT);
+	input_set_capability(input_dev, EV_KEY, BTN_DPAD_DOWN);
+	input_set_capability(input_dev, EV_KEY, BTN_DPAD_LEFT);
+	input_set_capability(input_dev, EV_KEY, BTN_DPAD_UP);
+	input_set_capability(input_dev, EV_KEY, BTN_EAST);
+	input_set_capability(input_dev, EV_KEY, BTN_SOUTH);
+	input_set_capability(input_dev, EV_KEY, BTN_NORTH);
+	input_set_capability(input_dev, EV_KEY, BTN_WEST);
+	input_set_capability(input_dev, EV_KEY, BTN_TL);
+	input_set_capability(input_dev, EV_KEY, BTN_TL2);
+	input_set_capability(input_dev, EV_KEY, BTN_TR);
+	input_set_capability(input_dev, EV_KEY, BTN_TR2);
+	input_set_capability(input_dev, EV_KEY, BTN_THUMBL);
+	input_set_capability(input_dev, EV_KEY, BTN_THUMBR);
+	input_set_capability(input_dev, EV_KEY, BTN_SELECT);
+	input_set_capability(input_dev, EV_KEY, BTN_START);
+	input_set_capability(input_dev, EV_KEY, BTN_MODE);
+
+	/*
+	 * These two buttons are actually TV Control and Power.
+	 *
+	 * TV Control draws a line at the bottom of the DRC’s screen saying to
+	 * go into System Settings (on the original proprietary OS), while
+	 * Power will shutdown the DRC when held for four seconds, but those
+	 * two are still normal buttons otherwise.
+	 */
+	input_set_capability(input_dev, EV_KEY, BTN_Z);
+	input_set_capability(input_dev, EV_KEY, BTN_DEAD);
+
+	input_set_abs_params(input_dev, ABS_X, STICK_MIN, STICK_MAX, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, STICK_MIN, STICK_MAX, 0, 0);
+	input_set_abs_params(input_dev, ABS_RX, STICK_MIN, STICK_MAX, 0, 0);
+	input_set_abs_params(input_dev, ABS_RY, STICK_MIN, STICK_MAX, 0, 0);
+	input_set_abs_params(input_dev, ABS_VOLUME, VOLUME_MIN, VOLUME_MAX, 0, 0);
+
+	return true;
+}
+
+int wiiu_hid_probe(struct hid_device *hdev,
+		   const struct hid_device_id *id)
+{
+	struct drc *drc;
+	int ret;
+
+	drc = devm_kzalloc(&hdev->dev, sizeof(struct drc), GFP_KERNEL);
+	if (!drc)
+		return -ENOMEM;
+
+	drc->driver = NINTENDO_WIIU;
+	drc->hdev = hdev;
+
+	hid_set_drvdata(hdev, drc);
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "parse failed\n");
+		return ret;
+	}
+
+	if (!drc_setup_joypad(drc, hdev)) {
+		hid_err(hdev, "could not allocate interface\n");
+		return -ENOMEM;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW | HID_CONNECT_DRIVER);
+	if (ret) {
+		hid_err(hdev, "hw start failed\n");
+		return ret;
+	}
+
+	ret = input_register_device(drc->joy_input_dev);
+	if (ret) {
+		hid_err(hdev, "failed to register interface\n");
+		return ret;
+	}
+
+	return 0;
+}
diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
index f16d8d94b1da..0b0588f5bb8a 100644
--- a/drivers/hid/hid-nintendo.c
+++ b/drivers/hid/hid-nintendo.c
@@ -16,9 +16,15 @@
 static int nintendo_hid_event(struct hid_device *hdev,
 			      struct hid_report *report, u8 *raw_data, int size)
 {
-#ifdef CONFIG_HID_NINTENDO_SWITCH
+#if defined(CONFIG_HID_NINTENDO_SWITCH) || defined(CONFIG_HID_NINTENDO_WIIU)
 	enum nintendo_driver *driver = hid_get_drvdata(hdev);
+#endif
 
+#ifdef CONFIG_HID_NINTENDO_WIIU
+	if (*driver == NINTENDO_WIIU)
+		return wiiu_hid_event(hdev, report, raw_data, size);
+#endif
+#ifdef CONFIG_HID_NINTENDO_SWITCH
 	if (*driver == NINTENDO_SWITCH)
 		return switch_hid_event(hdev, report, raw_data, size);
 #endif
@@ -30,10 +36,14 @@ static int nintendo_hid_probe(struct hid_device *hdev,
 {
 	int ret = 0;
 
+#ifdef CONFIG_HID_NINTENDO_WIIU
+	if (id->product == USB_DEVICE_ID_NINTENDO_WIIU_DRH)
+		ret = wiiu_hid_probe(hdev, id);
+#endif
 #ifdef CONFIG_HID_NINTENDO_SWITCH
-	ret = switch_hid_probe(hdev, id);
+	if (id->product != USB_DEVICE_ID_NINTENDO_WIIU_DRH)
+		ret = switch_hid_probe(hdev, id);
 #endif
-
 	return ret;
 }
 
@@ -48,6 +58,11 @@ static void nintendo_hid_remove(struct hid_device *hdev)
 }
 
 static const struct hid_device_id nintendo_hid_devices[] = {
+#ifdef CONFIG_HID_NINTENDO_WIIU
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NINTENDO,
+			 USB_DEVICE_ID_NINTENDO_WIIU_DRH) },
+#endif
+
 #ifdef CONFIG_HID_NINTENDO_SWITCH
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NINTENDO,
 			 USB_DEVICE_ID_NINTENDO_PROCON) },
diff --git a/drivers/hid/hid-nintendo.h b/drivers/hid/hid-nintendo.h
index 56bb7e800cc2..eba300ee039e 100644
--- a/drivers/hid/hid-nintendo.h
+++ b/drivers/hid/hid-nintendo.h
@@ -6,9 +6,15 @@
 /* Every HID drvdata supported by this driver MUST start with this
  * enum, so that dispatch can work properly. */
 enum nintendo_driver {
+	NINTENDO_WIIU,
 	NINTENDO_SWITCH,
 };
 
+int wiiu_hid_event(struct hid_device *hdev, struct hid_report *report,
+		   u8 *data, int len);
+int wiiu_hid_probe(struct hid_device *hdev,
+		   const struct hid_device_id *id);
+
 int switch_hid_event(struct hid_device *hdev,
 		     struct hid_report *report, u8 *raw_data, int size);
 int switch_hid_probe(struct hid_device *hdev,
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index 2e104682c22b..6b13edfa195d 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -517,6 +517,9 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIMOTE2) },
 #endif
+#if IS_ENABLED(CONFIG_HID_WIIU_DRC)
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_WIIU_DRH) },
+#endif
 #if IS_ENABLED(CONFIG_HID_NTI)
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTI, USB_DEVICE_ID_USB_SUN) },
 #endif
-- 
2.33.1


  parent reply	other threads:[~2021-10-27 10:11 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-02 23:28 [PATCH 0/4] RFC: HID: wiiu-drc: Add a driver for the Wii U gamepad Emmanuel Gil Peyrot
2021-05-02 23:28 ` [PATCH 1/4] HID: wiiu-drc: Add a driver for this gamepad Emmanuel Gil Peyrot
2021-05-05 22:33   ` Jonathan Neuschäfer
2021-05-06 10:07     ` Emmanuel Gil Peyrot
2021-05-06 10:29       ` Jonathan Neuschäfer
2021-05-06 11:53   ` Barnabás Pőcze
2021-05-02 23:28 ` [PATCH 2/4] HID: wiiu-drc: Implement touch reports Emmanuel Gil Peyrot
2021-05-05 22:43   ` Jonathan Neuschäfer
2021-05-06 10:20     ` Emmanuel Gil Peyrot
2021-05-02 23:28 ` [PATCH 3/4] HID: wiiu-drc: Add accelerometer, gyroscope and magnetometer readings Emmanuel Gil Peyrot
2021-05-02 23:28 ` [PATCH 4/4] HID: wiiu-drc: Add battery reporting Emmanuel Gil Peyrot
2021-05-06 11:45   ` Barnabás Pőcze
2021-05-19  8:59 ` [PATCH v3 0/4] HID: wiiu-drc: Add a driver for the Wii U gamepad Emmanuel Gil Peyrot
2021-05-19  8:59   ` [PATCH v3 1/4] HID: wiiu-drc: Add a driver for this gamepad Emmanuel Gil Peyrot
2021-05-19  8:59   ` [PATCH v3 2/4] HID: wiiu-drc: Implement touch reports Emmanuel Gil Peyrot
2021-05-19  8:59   ` [PATCH v3 3/4] HID: wiiu-drc: Add accelerometer, gyroscope and magnetometer readings Emmanuel Gil Peyrot
2021-05-19  8:59   ` [PATCH v3 4/4] HID: wiiu-drc: Add battery reporting Emmanuel Gil Peyrot
2021-09-21 15:08   ` [PATCH v3 0/4] HID: wiiu-drc: Add a driver for the Wii U gamepad Emmanuel Gil Peyrot
2021-10-19  9:14     ` Jiri Kosina
2021-10-19  9:27       ` Emmanuel Gil Peyrot
2021-10-19  9:30         ` Jiri Kosina
2021-10-19  9:36           ` Emmanuel Gil Peyrot
2021-11-04 11:21           ` Emmanuel Gil Peyrot
2021-11-05 17:27             ` François-Xavier Carton
2021-10-19 23:59         ` François-Xavier Carton
2021-10-20  6:24           ` Emmanuel Gil Peyrot
2021-10-19 11:04   ` [PATCH v4 0/5] HID: nintendo: Add support " Emmanuel Gil Peyrot
2021-10-19 11:04     ` [PATCH v4 1/5] HID: nintendo: split switch support into its own file Emmanuel Gil Peyrot
2021-10-22  8:32       ` kernel test robot
2021-10-22 10:25       ` kernel test robot
2021-10-19 11:04     ` [PATCH v4 2/5] HID: nintendo: drc: add support for the Wii U gamepad Emmanuel Gil Peyrot
2021-11-05 20:55       ` kernel test robot
2021-10-19 11:04     ` [PATCH v4 3/5] HID: nintendo: drc: implement touch reports Emmanuel Gil Peyrot
2021-10-19 11:04     ` [PATCH v4 4/5] HID: nintendo: drc: add accelerometer, gyroscope and magnetometer readings Emmanuel Gil Peyrot
2021-10-19 11:04     ` [PATCH v4 5/5] HID: nintendo: drc: add battery reporting Emmanuel Gil Peyrot
2021-10-27  8:10     ` [PATCH v4 0/5] HID: nintendo: Add support for the Wii U gamepad Jiri Kosina
2021-10-27 10:10     ` [PATCH v5 " Emmanuel Gil Peyrot
2021-10-27 10:10       ` [PATCH v5 1/5] HID: nintendo: split switch support into its own file Emmanuel Gil Peyrot
2021-10-27 10:10       ` Emmanuel Gil Peyrot [this message]
2021-10-27 10:10       ` [PATCH v5 3/5] HID: nintendo: drc: implement touch reports Emmanuel Gil Peyrot
2021-10-27 10:10       ` [PATCH v5 4/5] HID: nintendo: drc: add accelerometer, gyroscope and magnetometer readings Emmanuel Gil Peyrot
2021-10-27 10:10       ` [PATCH v5 5/5] HID: nintendo: drc: add battery reporting Emmanuel Gil Peyrot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211027101043.31609-3-linkmauve@linkmauve.fr \
    --to=linkmauve@linkmauve.fr \
    --cc=ash@heyquark.com \
    --cc=benjamin.tissoires@redhat.com \
    --cc=djogorchock@gmail.com \
    --cc=j.ne@posteo.net \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pobrn@protonmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).