linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 0/9] add aspeed-jpeg support for aspeed-video
@ 2021-11-15  7:44 Jammy Huang
  2021-11-15  7:44 ` [PATCH v4 1/9] media: aspeed: move err-handling together to the bottom Jammy Huang
                   ` (8 more replies)
  0 siblings, 9 replies; 12+ messages in thread
From: Jammy Huang @ 2021-11-15  7:44 UTC (permalink / raw)
  To: eajames, mchehab, joel, andrew, hverkuil-cisco, sakari.ailus,
	gregkh, laurent.pinchart, linux-media, openbmc, linux-arm-kernel,
	linux-aspeed, linux-kernel

The aim of this series is to add aspeed-jpeg support for aspeed-video
driver.

To achieve this major goal some refactors are included.

In the last, debugfs information is also updated per this change.

Changes in v4:
 - Add definition for the Aspeed JPEG format
 - Reserve controls for ASPEED
 - Use s_fmt to update format rather than new control
 - Update aspeed hq quality range, 1 ~ 12


Jammy Huang (9):
  media: aspeed: move err-handling together to the bottom
  media: aspeed: use v4l2_info/v4l2_warn/v4l2_dbg for log
  media: aspeed: add more debug log messages
  media: aspeed: refactor to gather format/compress settings
  media: v4l: Add definition for the Aspeed JPEG format
  media: v4l2-ctrls: Reserve controls for ASPEED
  media: aspeed: Support aspeed mode to reduce compressed data
  media: aspeed: add comments and macro
  media: aspeed: Extend debug message

 .../media/uapi/v4l/pixfmt-reserved.rst        |  12 +
 drivers/media/platform/aspeed-video.c         | 464 ++++++++++++++----
 drivers/media/v4l2-core/v4l2-ioctl.c          |   1 +
 include/uapi/linux/aspeed-video.h             |  15 +
 include/uapi/linux/v4l2-controls.h            |   5 +
 include/uapi/linux/videodev2.h                |   1 +
 6 files changed, 413 insertions(+), 85 deletions(-)
 create mode 100644 include/uapi/linux/aspeed-video.h

-- 
2.25.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v4 1/9] media: aspeed: move err-handling together to the bottom
  2021-11-15  7:44 [PATCH v4 0/9] add aspeed-jpeg support for aspeed-video Jammy Huang
@ 2021-11-15  7:44 ` Jammy Huang
  2021-11-15  7:44 ` [PATCH v4 2/9] media: aspeed: use v4l2_info/v4l2_warn/v4l2_dbg for log Jammy Huang
                   ` (7 subsequent siblings)
  8 siblings, 0 replies; 12+ messages in thread
From: Jammy Huang @ 2021-11-15  7:44 UTC (permalink / raw)
  To: eajames, mchehab, joel, andrew, hverkuil-cisco, sakari.ailus,
	gregkh, laurent.pinchart, linux-media, openbmc, linux-arm-kernel,
	linux-aspeed, linux-kernel

refine aspeed_video_setup_video() flow.

Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
---
v4:
  - no update
v3:
  - no update
v2:
  - no update
---
 drivers/media/platform/aspeed-video.c | 24 +++++++++++-------------
 1 file changed, 11 insertions(+), 13 deletions(-)

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index fea5e4d0927e..f5c40d6b4ece 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -1641,11 +1641,8 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
 
 	rc = video->ctrl_handler.error;
 	if (rc) {
-		v4l2_ctrl_handler_free(&video->ctrl_handler);
-		v4l2_device_unregister(v4l2_dev);
-
 		dev_err(video->dev, "Failed to init controls: %d\n", rc);
-		return rc;
+		goto err_ctrl_init;
 	}
 
 	v4l2_dev->ctrl_handler = &video->ctrl_handler;
@@ -1663,11 +1660,8 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
 
 	rc = vb2_queue_init(vbq);
 	if (rc) {
-		v4l2_ctrl_handler_free(&video->ctrl_handler);
-		v4l2_device_unregister(v4l2_dev);
-
 		dev_err(video->dev, "Failed to init vb2 queue\n");
-		return rc;
+		goto err_vb2_init;
 	}
 
 	vdev->queue = vbq;
@@ -1685,15 +1679,19 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
 	video_set_drvdata(vdev, video);
 	rc = video_register_device(vdev, VFL_TYPE_GRABBER, 0);
 	if (rc) {
-		vb2_queue_release(vbq);
-		v4l2_ctrl_handler_free(&video->ctrl_handler);
-		v4l2_device_unregister(v4l2_dev);
-
 		dev_err(video->dev, "Failed to register video device\n");
-		return rc;
+		goto err_video_reg;
 	}
 
 	return 0;
+
+err_video_reg:
+	vb2_queue_release(vbq);
+err_vb2_init:
+err_ctrl_init:
+	v4l2_ctrl_handler_free(&video->ctrl_handler);
+	v4l2_device_unregister(v4l2_dev);
+	return rc;
 }
 
 static int aspeed_video_init(struct aspeed_video *video)
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH v4 2/9] media: aspeed: use v4l2_info/v4l2_warn/v4l2_dbg for log
  2021-11-15  7:44 [PATCH v4 0/9] add aspeed-jpeg support for aspeed-video Jammy Huang
  2021-11-15  7:44 ` [PATCH v4 1/9] media: aspeed: move err-handling together to the bottom Jammy Huang
@ 2021-11-15  7:44 ` Jammy Huang
  2021-11-15  7:44 ` [PATCH v4 3/9] media: aspeed: add more debug log messages Jammy Huang
                   ` (6 subsequent siblings)
  8 siblings, 0 replies; 12+ messages in thread
From: Jammy Huang @ 2021-11-15  7:44 UTC (permalink / raw)
  To: eajames, mchehab, joel, andrew, hverkuil-cisco, sakari.ailus,
	gregkh, laurent.pinchart, linux-media, openbmc, linux-arm-kernel,
	linux-aspeed, linux-kernel

The debug log level, 0~3, is controlled by module_param, debug.
The higher the value, the more the information.
  0: off
  1: info
  2: debug
  3: register operations

Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
---
v4:
  - no update
v3:
  - update commit message
  - update MODULE_PARM_DESC for debug
v2:
  - use v4l2_xxx log rather than self-defined macro
---
 drivers/media/platform/aspeed-video.c | 40 +++++++++++++++------------
 1 file changed, 23 insertions(+), 17 deletions(-)

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index f5c40d6b4ece..6af57467b6d4 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -30,6 +30,7 @@
 #include <media/v4l2-event.h>
 #include <media/v4l2-ioctl.h>
 #include <media/videobuf2-dma-contig.h>
+#include <linux/videodev2.h>
 
 #define DEVICE_NAME			"aspeed-video"
 
@@ -390,6 +391,8 @@ static const struct v4l2_dv_timings_cap aspeed_video_timings_cap = {
 	},
 };
 
+static unsigned int debug;
+
 static void aspeed_video_init_jpeg_table(u32 *table, bool yuv420)
 {
 	int i;
@@ -437,23 +440,23 @@ static void aspeed_video_update(struct aspeed_video *video, u32 reg, u32 clear,
 	t &= ~clear;
 	t |= bits;
 	writel(t, video->base + reg);
-	dev_dbg(video->dev, "update %03x[%08x -> %08x]\n", reg, before,
-		readl(video->base + reg));
+	v4l2_dbg(3, debug, &video->v4l2_dev, "update %03x[%08x -> %08x]\n",
+		 reg, before, readl(video->base + reg));
 }
 
 static u32 aspeed_video_read(struct aspeed_video *video, u32 reg)
 {
 	u32 t = readl(video->base + reg);
 
-	dev_dbg(video->dev, "read %03x[%08x]\n", reg, t);
+	v4l2_dbg(3, debug, &video->v4l2_dev, "read %03x[%08x]\n", reg, t);
 	return t;
 }
 
 static void aspeed_video_write(struct aspeed_video *video, u32 reg, u32 val)
 {
 	writel(val, video->base + reg);
-	dev_dbg(video->dev, "write %03x[%08x]\n", reg,
-		readl(video->base + reg));
+	v4l2_dbg(3, debug, &video->v4l2_dev, "write %03x[%08x]\n", reg,
+		 readl(video->base + reg));
 }
 
 static void update_perf(struct aspeed_video_perf *p)
@@ -474,13 +477,13 @@ static int aspeed_video_start_frame(struct aspeed_video *video)
 	u32 seq_ctrl = aspeed_video_read(video, VE_SEQ_CTRL);
 
 	if (video->v4l2_input_status) {
-		dev_dbg(video->dev, "No signal; don't start frame\n");
+		v4l2_warn(&video->v4l2_dev, "No signal; don't start frame\n");
 		return 0;
 	}
 
 	if (!(seq_ctrl & VE_SEQ_CTRL_COMP_BUSY) ||
 	    !(seq_ctrl & VE_SEQ_CTRL_CAP_BUSY)) {
-		dev_dbg(video->dev, "Engine busy; don't start frame\n");
+		v4l2_warn(&video->v4l2_dev, "Engine busy; don't start frame\n");
 		return -EBUSY;
 	}
 
@@ -489,7 +492,7 @@ static int aspeed_video_start_frame(struct aspeed_video *video)
 				       struct aspeed_video_buffer, link);
 	if (!buf) {
 		spin_unlock_irqrestore(&video->lock, flags);
-		dev_dbg(video->dev, "No buffers; don't start frame\n");
+		v4l2_warn(&video->v4l2_dev, "No buffers; don't start frame\n");
 		return -EPROTO;
 	}
 
@@ -569,7 +572,7 @@ static void aspeed_video_bufs_done(struct aspeed_video *video,
 
 static void aspeed_video_irq_res_change(struct aspeed_video *video, ulong delay)
 {
-	dev_dbg(video->dev, "Resolution changed; resetting\n");
+	v4l2_dbg(1, debug, &video->v4l2_dev, "Resolution changed; resetting\n");
 
 	set_bit(VIDEO_RES_CHANGE, &video->flags);
 	clear_bit(VIDEO_FRAME_INPRG, &video->flags);
@@ -770,8 +773,8 @@ static void aspeed_video_calc_compressed_size(struct aspeed_video *video,
 	aspeed_video_write(video, VE_STREAM_BUF_SIZE,
 			   compression_buffer_size_reg);
 
-	dev_dbg(video->dev, "Max compressed size: %x\n",
-		video->max_compressed_size);
+	v4l2_dbg(1, debug, &video->v4l2_dev, "Max compressed size: %#x\n",
+		 video->max_compressed_size);
 }
 
 #define res_check(v) test_and_clear_bit(VIDEO_MODE_DETECT_DONE, &(v)->flags)
@@ -808,7 +811,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 						      res_check(video),
 						      MODE_DETECT_TIMEOUT);
 		if (!rc) {
-			dev_dbg(video->dev, "Timed out; first mode detect\n");
+			v4l2_warn(&video->v4l2_dev, "Timed out; first mode detect\n");
 			clear_bit(VIDEO_RES_DETECT, &video->flags);
 			return;
 		}
@@ -822,7 +825,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 						      MODE_DETECT_TIMEOUT);
 		clear_bit(VIDEO_RES_DETECT, &video->flags);
 		if (!rc) {
-			dev_dbg(video->dev, "Timed out; second mode detect\n");
+			v4l2_warn(&video->v4l2_dev, "Timed out; second mode detect\n");
 			return;
 		}
 
@@ -856,7 +859,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 	} while (invalid_resolution && (tries++ < INVALID_RESOLUTION_RETRIES));
 
 	if (invalid_resolution) {
-		dev_dbg(video->dev, "Invalid resolution detected\n");
+		v4l2_warn(&video->v4l2_dev, "Invalid resolution detected\n");
 		return;
 	}
 
@@ -873,8 +876,8 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
 	aspeed_video_update(video, VE_SEQ_CTRL, 0,
 			    VE_SEQ_CTRL_AUTO_COMP | VE_SEQ_CTRL_EN_WATCHDOG);
 
-	dev_dbg(video->dev, "Got resolution: %dx%d\n", det->width,
-		det->height);
+	v4l2_dbg(1, debug, &video->v4l2_dev, "Got resolution: %dx%d\n",
+		 det->width, det->height);
 }
 
 static void aspeed_video_set_resolution(struct aspeed_video *video)
@@ -1501,7 +1504,7 @@ static void aspeed_video_stop_streaming(struct vb2_queue *q)
 				!test_bit(VIDEO_FRAME_INPRG, &video->flags),
 				STOP_TIMEOUT);
 	if (!rc) {
-		dev_dbg(video->dev, "Timed out when stopping streaming\n");
+		v4l2_warn(&video->v4l2_dev, "Timed out when stopping streaming\n");
 
 		/*
 		 * Need to force stop any DMA and try and get HW into a good
@@ -1851,6 +1854,9 @@ static struct platform_driver aspeed_video_driver = {
 
 module_platform_driver(aspeed_video_driver);
 
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Debug level (0=off,1=info,2=debug,3=reg ops)");
+
 MODULE_DESCRIPTION("ASPEED Video Engine Driver");
 MODULE_AUTHOR("Eddie James");
 MODULE_LICENSE("GPL v2");
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH v4 3/9] media: aspeed: add more debug log messages
  2021-11-15  7:44 [PATCH v4 0/9] add aspeed-jpeg support for aspeed-video Jammy Huang
  2021-11-15  7:44 ` [PATCH v4 1/9] media: aspeed: move err-handling together to the bottom Jammy Huang
  2021-11-15  7:44 ` [PATCH v4 2/9] media: aspeed: use v4l2_info/v4l2_warn/v4l2_dbg for log Jammy Huang
@ 2021-11-15  7:44 ` Jammy Huang
  2021-11-15  7:44 ` [PATCH v4 4/9] media: aspeed: refactor to gather format/compress settings Jammy Huang
                   ` (5 subsequent siblings)
  8 siblings, 0 replies; 12+ messages in thread
From: Jammy Huang @ 2021-11-15  7:44 UTC (permalink / raw)
  To: eajames, mchehab, joel, andrew, hverkuil-cisco, sakari.ailus,
	gregkh, laurent.pinchart, linux-media, openbmc, linux-arm-kernel,
	linux-aspeed, linux-kernel

The new messages are listed as below:
1. jpeg header and capture buffer information
2. information for each irq
3. current capture mode, sync or direct-fetch
4. time consumed for each frame
5. input timing changed information

Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
---
v4:
  - modify log level
v3:
  - update commit message
v2:
  - new
---
 drivers/media/platform/aspeed-video.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index 6af57467b6d4..e8dd0a7ebfc7 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -461,12 +461,17 @@ static void aspeed_video_write(struct aspeed_video *video, u32 reg, u32 val)
 
 static void update_perf(struct aspeed_video_perf *p)
 {
+	struct aspeed_video *v = container_of(p, struct aspeed_video,
+					      perf);
+
 	p->duration =
 		ktime_to_ms(ktime_sub(ktime_get(),  p->last_sample));
 	p->totaltime += p->duration;
 
 	p->duration_max = max(p->duration, p->duration_max);
 	p->duration_min = min(p->duration, p->duration_min);
+	v4l2_dbg(2, debug, &v->v4l2_dev, "time consumed: %d ms\n",
+		 p->duration);
 }
 
 static int aspeed_video_start_frame(struct aspeed_video *video)
@@ -597,6 +602,12 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
 	struct aspeed_video *video = arg;
 	u32 sts = aspeed_video_read(video, VE_INTERRUPT_STATUS);
 
+	v4l2_dbg(2, debug, &video->v4l2_dev, "irq sts=%#x %s%s%s%s\n", sts,
+		 sts & VE_INTERRUPT_MODE_DETECT_WD ? ", unlock" : "",
+		 sts & VE_INTERRUPT_MODE_DETECT ? ", lock" : "",
+		 sts & VE_INTERRUPT_CAPTURE_COMPLETE ? ", capture-done" : "",
+		 sts & VE_INTERRUPT_COMP_COMPLETE ? ", comp-done" : "");
+
 	/*
 	 * Resolution changed or signal was lost; reset the engine and
 	 * re-initialize
@@ -910,6 +921,7 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
 
 	/* Don't use direct mode below 1024 x 768 (irqs don't fire) */
 	if (size < DIRECT_FETCH_THRESHOLD) {
+		v4l2_dbg(1, debug, &video->v4l2_dev, "Capture: Sync Mode\n");
 		aspeed_video_write(video, VE_TGS_0,
 				   FIELD_PREP(VE_TGS_FIRST,
 					      video->frame_left - 1) |
@@ -921,6 +933,7 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
 					      video->frame_bottom + 1));
 		aspeed_video_update(video, VE_CTRL, 0, VE_CTRL_INT_DE);
 	} else {
+		v4l2_dbg(1, debug, &video->v4l2_dev, "Capture: Direct Mode\n");
 		aspeed_video_update(video, VE_CTRL, 0, VE_CTRL_DIRECT_FETCH);
 	}
 
@@ -937,6 +950,10 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
 		if (!aspeed_video_alloc_buf(video, &video->srcs[1], size))
 			goto err_mem;
 
+		v4l2_dbg(1, debug, &video->v4l2_dev, "src buf0 addr(%#x) size(%d)\n",
+			 video->srcs[0].dma, video->srcs[0].size);
+		v4l2_dbg(1, debug, &video->v4l2_dev, "src buf1 addr(%#x) size(%d)\n",
+			 video->srcs[1].dma, video->srcs[1].size);
 		aspeed_video_write(video, VE_SRC0_ADDR, video->srcs[0].dma);
 		aspeed_video_write(video, VE_SRC1_ADDR, video->srcs[1].dma);
 	}
@@ -1201,6 +1218,9 @@ static int aspeed_video_set_dv_timings(struct file *file, void *fh,
 
 	timings->type = V4L2_DV_BT_656_1120;
 
+	v4l2_dbg(1, debug, &video->v4l2_dev, "set new timings(%dx%d)\n",
+		 timings->bt.width, timings->bt.height);
+
 	return 0;
 }
 
@@ -1383,6 +1403,7 @@ static void aspeed_video_resolution_work(struct work_struct *work)
 			.u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
 		};
 
+		v4l2_dbg(1, debug, &video->v4l2_dev, "fire source change event\n");
 		v4l2_event_queue(&video->vdev, &ev);
 	} else if (test_bit(VIDEO_STREAMING, &video->flags)) {
 		/* No resolution change so just restart streaming */
@@ -1715,6 +1736,7 @@ static int aspeed_video_init(struct aspeed_video *video)
 		dev_err(dev, "Unable to request IRQ %d\n", irq);
 		return rc;
 	}
+	dev_info(video->dev, "irq %d\n", irq);
 
 	video->eclk = devm_clk_get(dev, "eclk");
 	if (IS_ERR(video->eclk)) {
@@ -1751,6 +1773,8 @@ static int aspeed_video_init(struct aspeed_video *video)
 		rc = -ENOMEM;
 		goto err_release_reserved_mem;
 	}
+	dev_info(video->dev, "alloc mem size(%d) at %#x for jpeg header\n",
+		 VE_JPEG_HEADER_SIZE, video->jpeg.dma);
 
 	aspeed_video_init_jpeg_table(video->jpeg.virt, video->yuv420);
 
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH v4 4/9] media: aspeed: refactor to gather format/compress settings
  2021-11-15  7:44 [PATCH v4 0/9] add aspeed-jpeg support for aspeed-video Jammy Huang
                   ` (2 preceding siblings ...)
  2021-11-15  7:44 ` [PATCH v4 3/9] media: aspeed: add more debug log messages Jammy Huang
@ 2021-11-15  7:44 ` Jammy Huang
  2021-11-15  7:44 ` [PATCH v4 5/9] media: v4l: Add definition for the Aspeed JPEG format Jammy Huang
                   ` (4 subsequent siblings)
  8 siblings, 0 replies; 12+ messages in thread
From: Jammy Huang @ 2021-11-15  7:44 UTC (permalink / raw)
  To: eajames, mchehab, joel, andrew, hverkuil-cisco, sakari.ailus,
	gregkh, laurent.pinchart, linux-media, openbmc, linux-arm-kernel,
	linux-aspeed, linux-kernel

Add API, aspeed_video_update_regs(), to gather format/compress settings
which are controlled by user.

Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
---
v4:
  - no update
v3:
  - no update
v2:
  - update commit message
  - update log to use v4l2_dbg rather than dprintk
---
 drivers/media/platform/aspeed-video.c | 69 ++++++++++++++-------------
 1 file changed, 35 insertions(+), 34 deletions(-)

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index e8dd0a7ebfc7..d2335d669fb3 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -967,20 +967,42 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
 		aspeed_video_free_buf(video, &video->srcs[0]);
 }
 
-static void aspeed_video_init_regs(struct aspeed_video *video)
+static void aspeed_video_update_regs(struct aspeed_video *video)
 {
 	u32 comp_ctrl = VE_COMP_CTRL_RSVD |
 		FIELD_PREP(VE_COMP_CTRL_DCT_LUM, video->jpeg_quality) |
 		FIELD_PREP(VE_COMP_CTRL_DCT_CHR, video->jpeg_quality | 0x10);
-	u32 ctrl = VE_CTRL_AUTO_OR_CURSOR;
+	u32 ctrl = 0;
 	u32 seq_ctrl = VE_SEQ_CTRL_JPEG_MODE;
 
+	v4l2_dbg(1, debug, &video->v4l2_dev, "framerate(%d)\n",
+		 video->frame_rate);
+	v4l2_dbg(1, debug, &video->v4l2_dev, "subsample(%s)\n",
+		 video->yuv420 ? "420" : "444");
+	v4l2_dbg(1, debug, &video->v4l2_dev, "compression quality(%d)\n",
+		 video->jpeg_quality);
+
 	if (video->frame_rate)
 		ctrl |= FIELD_PREP(VE_CTRL_FRC, video->frame_rate);
 
 	if (video->yuv420)
 		seq_ctrl |= VE_SEQ_CTRL_YUV420;
 
+	if (video->jpeg.virt)
+		aspeed_video_update_jpeg_table(video->jpeg.virt, video->yuv420);
+
+	/* Set control registers */
+	aspeed_video_update(video, VE_SEQ_CTRL,
+			    VE_SEQ_CTRL_JPEG_MODE | VE_SEQ_CTRL_YUV420,
+			    seq_ctrl);
+	aspeed_video_update(video, VE_CTRL, VE_CTRL_FRC, ctrl);
+	aspeed_video_update(video, VE_COMP_CTRL,
+			    VE_COMP_CTRL_DCT_LUM | VE_COMP_CTRL_DCT_CHR,
+			    comp_ctrl);
+}
+
+static void aspeed_video_init_regs(struct aspeed_video *video)
+{
 	/* Unlock VE registers */
 	aspeed_video_write(video, VE_PROTECTION_KEY, VE_PROTECTION_KEY_UNLOCK);
 
@@ -995,9 +1017,8 @@ static void aspeed_video_init_regs(struct aspeed_video *video)
 	aspeed_video_write(video, VE_JPEG_ADDR, video->jpeg.dma);
 
 	/* Set control registers */
-	aspeed_video_write(video, VE_SEQ_CTRL, seq_ctrl);
-	aspeed_video_write(video, VE_CTRL, ctrl);
-	aspeed_video_write(video, VE_COMP_CTRL, comp_ctrl);
+	aspeed_video_write(video, VE_CTRL, VE_CTRL_AUTO_OR_CURSOR);
+	aspeed_video_write(video, VE_COMP_CTRL, VE_COMP_CTRL_RSVD);
 
 	/* Don't downscale */
 	aspeed_video_write(video, VE_SCALING_FACTOR, 0x10001000);
@@ -1326,27 +1347,6 @@ static const struct v4l2_ioctl_ops aspeed_video_ioctl_ops = {
 	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
 };
 
-static void aspeed_video_update_jpeg_quality(struct aspeed_video *video)
-{
-	u32 comp_ctrl = FIELD_PREP(VE_COMP_CTRL_DCT_LUM, video->jpeg_quality) |
-		FIELD_PREP(VE_COMP_CTRL_DCT_CHR, video->jpeg_quality | 0x10);
-
-	aspeed_video_update(video, VE_COMP_CTRL,
-			    VE_COMP_CTRL_DCT_LUM | VE_COMP_CTRL_DCT_CHR,
-			    comp_ctrl);
-}
-
-static void aspeed_video_update_subsampling(struct aspeed_video *video)
-{
-	if (video->jpeg.virt)
-		aspeed_video_update_jpeg_table(video->jpeg.virt, video->yuv420);
-
-	if (video->yuv420)
-		aspeed_video_update(video, VE_SEQ_CTRL, 0, VE_SEQ_CTRL_YUV420);
-	else
-		aspeed_video_update(video, VE_SEQ_CTRL, VE_SEQ_CTRL_YUV420, 0);
-}
-
 static int aspeed_video_set_ctrl(struct v4l2_ctrl *ctrl)
 {
 	struct aspeed_video *video = container_of(ctrl->handler,
@@ -1356,16 +1356,13 @@ static int aspeed_video_set_ctrl(struct v4l2_ctrl *ctrl)
 	switch (ctrl->id) {
 	case V4L2_CID_JPEG_COMPRESSION_QUALITY:
 		video->jpeg_quality = ctrl->val;
-		aspeed_video_update_jpeg_quality(video);
+		if (test_bit(VIDEO_STREAMING, &video->flags))
+			aspeed_video_update_regs(video);
 		break;
 	case V4L2_CID_JPEG_CHROMA_SUBSAMPLING:
-		if (ctrl->val == V4L2_JPEG_CHROMA_SUBSAMPLING_420) {
-			video->yuv420 = true;
-			aspeed_video_update_subsampling(video);
-		} else {
-			video->yuv420 = false;
-			aspeed_video_update_subsampling(video);
-		}
+		video->yuv420 = (ctrl->val == V4L2_JPEG_CHROMA_SUBSAMPLING_420);
+		if (test_bit(VIDEO_STREAMING, &video->flags))
+			aspeed_video_update_regs(video);
 		break;
 	default:
 		return -EINVAL;
@@ -1393,6 +1390,8 @@ static void aspeed_video_resolution_work(struct work_struct *work)
 
 	aspeed_video_init_regs(video);
 
+	aspeed_video_update_regs(video);
+
 	aspeed_video_get_resolution(video);
 
 	if (video->detected_timings.width != video->active_timings.width ||
@@ -1504,6 +1503,8 @@ static int aspeed_video_start_streaming(struct vb2_queue *q,
 	video->perf.duration_max = 0;
 	video->perf.duration_min = 0xffffffff;
 
+	aspeed_video_update_regs(video);
+
 	rc = aspeed_video_start_frame(video);
 	if (rc) {
 		aspeed_video_bufs_done(video, VB2_BUF_STATE_QUEUED);
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH v4 5/9] media: v4l: Add definition for the Aspeed JPEG format
  2021-11-15  7:44 [PATCH v4 0/9] add aspeed-jpeg support for aspeed-video Jammy Huang
                   ` (3 preceding siblings ...)
  2021-11-15  7:44 ` [PATCH v4 4/9] media: aspeed: refactor to gather format/compress settings Jammy Huang
@ 2021-11-15  7:44 ` Jammy Huang
  2021-11-15  7:44 ` [PATCH v4 6/9] media: v4l2-ctrls: Reserve controls for ASPEED Jammy Huang
                   ` (3 subsequent siblings)
  8 siblings, 0 replies; 12+ messages in thread
From: Jammy Huang @ 2021-11-15  7:44 UTC (permalink / raw)
  To: eajames, mchehab, joel, andrew, hverkuil-cisco, sakari.ailus,
	gregkh, laurent.pinchart, linux-media, openbmc, linux-arm-kernel,
	linux-aspeed, linux-kernel

This introduces support for the Aspeed JPEG format, where the new frame
can refer to previous frame to reduce the amount of compressed data. The
concept is similar to I/P frame of video compression. I will compare the
new frame with previous one to decide which macroblock's data is
changed, and only the changed macroblocks will be compressed.

This Aspeed JPEG format is used by the video engine on Aspeed platforms,
which is generally adapted for remote KVM.

Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
---
v4:
  - new
---
 Documentation/media/uapi/v4l/pixfmt-reserved.rst | 12 ++++++++++++
 drivers/media/v4l2-core/v4l2-ioctl.c             |  1 +
 include/uapi/linux/videodev2.h                   |  1 +
 3 files changed, 14 insertions(+)

diff --git a/Documentation/media/uapi/v4l/pixfmt-reserved.rst b/Documentation/media/uapi/v4l/pixfmt-reserved.rst
index b2cd155e691b..23c05063133d 100644
--- a/Documentation/media/uapi/v4l/pixfmt-reserved.rst
+++ b/Documentation/media/uapi/v4l/pixfmt-reserved.rst
@@ -264,6 +264,18 @@ please make a proposal on the linux-media mailing list.
 	of tiles, resulting in 32-aligned resolutions for the luminance plane
 	and 16-aligned resolutions for the chrominance plane (with 2x2
 	subsampling).
+    * .. _V4L2-PIX-FMT-AJPG:
+
+      - ``V4L2_PIX_FMT_AJPG``
+      - 'AJPG'
+      - ASPEED JPEG format used by the aspeed-video driver on Aspeed platforms,
+        which is generally adapted for remote KVM.
+        On each frame compression, I will compare the new frame with previous
+        one to decide which macroblock's data is changed, and only the changed
+        macroblocks will be compressed.
+
+        You could reference to chapter 36, Video Engine, of AST2600's datasheet
+        for more information.
 
 .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
 
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index 24db33f803c0..00dde01d2f97 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -1378,6 +1378,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
 		case V4L2_PIX_FMT_S5C_UYVY_JPG:	descr = "S5C73MX interleaved UYVY/JPEG"; break;
 		case V4L2_PIX_FMT_MT21C:	descr = "Mediatek Compressed Format"; break;
 		case V4L2_PIX_FMT_SUNXI_TILED_NV12: descr = "Sunxi Tiled NV12 Format"; break;
+		case V4L2_PIX_FMT_AJPG:		descr = "Aspeed JPEG"; break;
 		default:
 			if (fmt->description[0])
 				return;
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index 3210b3c82a4a..994eb6155ea9 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -726,6 +726,7 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_INZI     v4l2_fourcc('I', 'N', 'Z', 'I') /* Intel Planar Greyscale 10-bit and Depth 16-bit */
 #define V4L2_PIX_FMT_SUNXI_TILED_NV12 v4l2_fourcc('S', 'T', '1', '2') /* Sunxi Tiled NV12 Format */
 #define V4L2_PIX_FMT_CNF4     v4l2_fourcc('C', 'N', 'F', '4') /* Intel 4-bit packed depth confidence information */
+#define V4L2_PIX_FMT_AJPG     v4l2_fourcc('A', 'J', 'P', 'G') /* Aspeed JPEG */
 
 /* 10bit raw bayer packed, 32 bytes for every 25 pixels, last LSB 6 bits unused */
 #define V4L2_PIX_FMT_IPU3_SBGGR10	v4l2_fourcc('i', 'p', '3', 'b') /* IPU3 packed 10-bit BGGR bayer */
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH v4 6/9] media: v4l2-ctrls: Reserve controls for ASPEED
  2021-11-15  7:44 [PATCH v4 0/9] add aspeed-jpeg support for aspeed-video Jammy Huang
                   ` (4 preceding siblings ...)
  2021-11-15  7:44 ` [PATCH v4 5/9] media: v4l: Add definition for the Aspeed JPEG format Jammy Huang
@ 2021-11-15  7:44 ` Jammy Huang
  2021-11-15  7:44 ` [PATCH v4 7/9] media: aspeed: Support aspeed mode to reduce compressed data Jammy Huang
                   ` (2 subsequent siblings)
  8 siblings, 0 replies; 12+ messages in thread
From: Jammy Huang @ 2021-11-15  7:44 UTC (permalink / raw)
  To: eajames, mchehab, joel, andrew, hverkuil-cisco, sakari.ailus,
	gregkh, laurent.pinchart, linux-media, openbmc, linux-arm-kernel,
	linux-aspeed, linux-kernel

Reserve controls for ASPEED video family. Aspeed video engine contains a
few features which improve video quality, reduce amount of compressed
data, and etc. Hence, 16 controls are reserved for these aspeed
proprietary features.

Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
---
v4:
  - new
---
 include/uapi/linux/v4l2-controls.h | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
index a2669b79b294..e7c425a6fa9f 100644
--- a/include/uapi/linux/v4l2-controls.h
+++ b/include/uapi/linux/v4l2-controls.h
@@ -192,6 +192,11 @@ enum v4l2_colorfx {
  * We reserve 16 controls for this driver. */
 #define V4L2_CID_USER_IMX_BASE			(V4L2_CID_USER_BASE + 0x10b0)
 
+/* The base for the aspeed driver controls.
+ * We reserve 16 controls for this driver.
+ */
+#define V4L2_CID_USER_ASPEED_BASE		(V4L2_CID_USER_BASE + 0x10c0)
+
 /* MPEG-class control IDs */
 /* The MPEG controls are applicable to all codec controls
  * and the 'MPEG' part of the define is historical */
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH v4 7/9] media: aspeed: Support aspeed mode to reduce compressed data
  2021-11-15  7:44 [PATCH v4 0/9] add aspeed-jpeg support for aspeed-video Jammy Huang
                   ` (5 preceding siblings ...)
  2021-11-15  7:44 ` [PATCH v4 6/9] media: v4l2-ctrls: Reserve controls for ASPEED Jammy Huang
@ 2021-11-15  7:44 ` Jammy Huang
  2021-11-15  8:19   ` Sakari Ailus
  2021-11-15  7:44 ` [PATCH v4 8/9] media: aspeed: add comments and macro Jammy Huang
  2021-11-15  7:44 ` [PATCH v4 9/9] media: aspeed: Extend debug message Jammy Huang
  8 siblings, 1 reply; 12+ messages in thread
From: Jammy Huang @ 2021-11-15  7:44 UTC (permalink / raw)
  To: eajames, mchehab, joel, andrew, hverkuil-cisco, sakari.ailus,
	gregkh, laurent.pinchart, linux-media, openbmc, linux-arm-kernel,
	linux-aspeed, linux-kernel

aspeed supports differential jpeg format which only compress the parts
which are changed. In this way, it reduces both the amount of data to be
transferred by network and those to be decoded on the client side.

4 new ctrls are added:
* Aspeed JPEG Format: to control aspeed's partial jpeg on/off
  0: standard jpeg, 1: aspeed jpeg
* Aspeed Compression Mode: to control aspeed's compression mode
  0: DCT Only, 1: DCT VQ mix 2-color, 2: DCT VQ mix 4-color
  This is AST2400 only. It will adapt JPEG or VQ encoding method according
  to the context automatically.
* Aspeed HQ Mode: to control aspeed's high quality(2-pass) compression mode
  This only works with yuv444 subsampling.
* Aspeed HQ Quality: to control the quality of aspeed's HQ mode
  only useful if Aspeed HQ mode is enabled

Aspeed JPEG Format requires an additional buffer, called bcd, to store
the information about which macro block in the new frame is different
from the previous one.

To have bcd correctly working, we need to swap the buffers for src0/1 to
make src1 refer to previous frame and src0 to the coming new frame.

Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
---
v4
  - add include/uapi/linux/aspeed-video.h for V4L2_CID_ASPEED_XXX
  - add aspeed_video_set_format
  - remove aspeed_ctrl_format
  - add variable, format, to replace partial_jpeg
  - modify aspeed_ctrl_HQ_jpeg_quality's range
  - reduce bcd buffer size
  - update commit message
v3:
  - 'compression mode' only available for G4
v2:
  - update commit message
  - use v4l2_xxx log rather than self-defined macro
---
 drivers/media/platform/aspeed-video.c | 247 +++++++++++++++++++++++---
 include/uapi/linux/aspeed-video.h     |  15 ++
 2 files changed, 238 insertions(+), 24 deletions(-)
 create mode 100644 include/uapi/linux/aspeed-video.h

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index d2335d669fb3..a13214e32454 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -31,6 +31,7 @@
 #include <media/v4l2-ioctl.h>
 #include <media/videobuf2-dma-contig.h>
 #include <linux/videodev2.h>
+#include <uapi/linux/aspeed-video.h>
 
 #define DEVICE_NAME			"aspeed-video"
 
@@ -55,6 +56,7 @@
 
 #define VE_MAX_SRC_BUFFER_SIZE		0x8ca000 /* 1920 * 1200, 32bpp */
 #define VE_JPEG_HEADER_SIZE		0x006000 /* 512 * 12 * 4 */
+#define VE_BCD_BUFF_SIZE		0x9000 /* (1920/8) * (1200/8) */
 
 #define VE_PROTECTION_KEY		0x000
 #define  VE_PROTECTION_KEY_UNLOCK	0x1a038aa8
@@ -108,6 +110,13 @@
 #define VE_SCALING_FILTER2		0x020
 #define VE_SCALING_FILTER3		0x024
 
+#define VE_BCD_CTRL			0x02C
+#define  VE_BCD_CTRL_EN_BCD		BIT(0)
+#define  VE_BCD_CTRL_EN_ABCD		BIT(1)
+#define  VE_BCD_CTRL_EN_CB		BIT(2)
+#define  VE_BCD_CTRL_THR		GENMASK(23, 16)
+#define  VE_BCD_CTRL_ABCD_THR		GENMASK(31, 24)
+
 #define VE_CAP_WINDOW			0x030
 #define VE_COMP_WINDOW			0x034
 #define VE_COMP_PROC_OFFSET		0x038
@@ -116,6 +125,7 @@
 #define VE_SRC0_ADDR			0x044
 #define VE_SRC_SCANLINE_OFFSET		0x048
 #define VE_SRC1_ADDR			0x04c
+#define VE_BCD_ADDR			0x050
 #define VE_COMP_ADDR			0x054
 
 #define VE_STREAM_BUF_SIZE		0x058
@@ -136,6 +146,8 @@
 #define  VE_COMP_CTRL_HQ_DCT_CHR	GENMASK(26, 22)
 #define  VE_COMP_CTRL_HQ_DCT_LUM	GENMASK(31, 27)
 
+#define VE_CB_ADDR			0x06C
+
 #define VE_OFFSET_COMP_STREAM		0x078
 
 #define VE_JPEG_COMP_SIZE_READ_BACK	0x084
@@ -195,6 +207,12 @@ enum {
 	VIDEO_CLOCKS_ON,
 };
 
+enum aspeed_video_format {
+	VIDEO_FMT_STANDARD = 0,
+	VIDEO_FMT_ASPEED,
+	VIDEO_FMT_MAX = VIDEO_FMT_ASPEED
+};
+
 struct aspeed_video_addr {
 	unsigned int size;
 	dma_addr_t dma;
@@ -243,10 +261,15 @@ struct aspeed_video {
 	unsigned int max_compressed_size;
 	struct aspeed_video_addr srcs[2];
 	struct aspeed_video_addr jpeg;
+	struct aspeed_video_addr bcd;
 
 	bool yuv420;
+	enum aspeed_video_format format;
+	bool hq_mode;
 	unsigned int frame_rate;
 	unsigned int jpeg_quality;
+	unsigned int jpeg_hq_quality;
+	unsigned int compression_mode;
 
 	unsigned int frame_bottom;
 	unsigned int frame_left;
@@ -391,8 +414,20 @@ static const struct v4l2_dv_timings_cap aspeed_video_timings_cap = {
 	},
 };
 
+static const char * const compress_mode_str[] = {"DCT Only",
+	"DCT VQ mix 2-color", "DCT VQ mix 4-color"};
+static const char * const format_str[] = {"Standard JPEG",
+	"Aspeed JPEG", "Partial JPEG"};
+
 static unsigned int debug;
 
+static bool aspeed_video_alloc_buf(struct aspeed_video *video,
+				   struct aspeed_video_addr *addr,
+				   unsigned int size);
+
+static void aspeed_video_free_buf(struct aspeed_video *video,
+				  struct aspeed_video_addr *addr);
+
 static void aspeed_video_init_jpeg_table(u32 *table, bool yuv420)
 {
 	int i;
@@ -480,6 +515,7 @@ static int aspeed_video_start_frame(struct aspeed_video *video)
 	unsigned long flags;
 	struct aspeed_video_buffer *buf;
 	u32 seq_ctrl = aspeed_video_read(video, VE_SEQ_CTRL);
+	bool bcd_buf_need = (video->format != VIDEO_FMT_STANDARD);
 
 	if (video->v4l2_input_status) {
 		v4l2_warn(&video->v4l2_dev, "No signal; don't start frame\n");
@@ -492,6 +528,20 @@ static int aspeed_video_start_frame(struct aspeed_video *video)
 		return -EBUSY;
 	}
 
+	if (bcd_buf_need && !video->bcd.size) {
+		if (!aspeed_video_alloc_buf(video, &video->bcd,
+					    VE_BCD_BUFF_SIZE)) {
+			dev_err(video->dev, "Failed to allocate BCD buffer\n");
+			dev_err(video->dev, "don't start frame\n");
+			return -ENOMEM;
+		}
+		aspeed_video_write(video, VE_BCD_ADDR, video->bcd.dma);
+		v4l2_dbg(1, debug, &video->v4l2_dev, "bcd addr(%#x) size(%d)\n",
+			 video->bcd.dma, video->bcd.size);
+	} else if (!bcd_buf_need && video->bcd.size) {
+		aspeed_video_free_buf(video, &video->bcd);
+	}
+
 	spin_lock_irqsave(&video->lock, flags);
 	buf = list_first_entry_or_null(&video->buffers,
 				       struct aspeed_video_buffer, link);
@@ -639,6 +689,7 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
 
 	if (sts & VE_INTERRUPT_COMP_COMPLETE) {
 		struct aspeed_video_buffer *buf;
+		bool empty = true;
 		u32 frame_size = aspeed_video_read(video,
 						   VE_JPEG_COMP_SIZE_READ_BACK);
 
@@ -652,13 +703,23 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
 		if (buf) {
 			vb2_set_plane_payload(&buf->vb.vb2_buf, 0, frame_size);
 
-			if (!list_is_last(&buf->link, &video->buffers)) {
+			/*
+			 * partial_jpeg requires continuous update.
+			 * On the contrary, standard jpeg can keep last buffer
+			 * to always have the latest result.
+			 */
+			if (video->format == VIDEO_FMT_STANDARD &&
+			    list_is_last(&buf->link, &video->buffers)) {
+				empty = false;
+				v4l2_warn(&video->v4l2_dev, "skip to keep last frame updated\n");
+			} else {
 				buf->vb.vb2_buf.timestamp = ktime_get_ns();
 				buf->vb.sequence = video->sequence++;
 				buf->vb.field = V4L2_FIELD_NONE;
 				vb2_buffer_done(&buf->vb.vb2_buf,
 						VB2_BUF_STATE_DONE);
 				list_del(&buf->link);
+				empty = list_empty(&video->buffers);
 			}
 		}
 		spin_unlock(&video->lock);
@@ -672,7 +733,18 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
 		aspeed_video_write(video, VE_INTERRUPT_STATUS,
 				   VE_INTERRUPT_COMP_COMPLETE);
 		sts &= ~VE_INTERRUPT_COMP_COMPLETE;
-		if (test_bit(VIDEO_STREAMING, &video->flags) && buf)
+
+		// swap src buffer if partial_jpeg
+		if (video->format != VIDEO_FMT_STANDARD) {
+			u32 src0, src1;
+
+			src0 = aspeed_video_read(video, VE_SRC0_ADDR);
+			src1 = aspeed_video_read(video, VE_SRC1_ADDR);
+			aspeed_video_write(video, VE_SRC0_ADDR, src1);
+			aspeed_video_write(video, VE_SRC1_ADDR, src0);
+		}
+
+		if (test_bit(VIDEO_STREAMING, &video->flags) && !empty)
 			aspeed_video_start_frame(video);
 	}
 
@@ -931,10 +1003,14 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
 				   FIELD_PREP(VE_TGS_FIRST, video->frame_top) |
 				   FIELD_PREP(VE_TGS_LAST,
 					      video->frame_bottom + 1));
-		aspeed_video_update(video, VE_CTRL, 0, VE_CTRL_INT_DE);
+		aspeed_video_update(video, VE_CTRL,
+				    VE_CTRL_INT_DE | VE_CTRL_DIRECT_FETCH,
+				    VE_CTRL_INT_DE);
 	} else {
 		v4l2_dbg(1, debug, &video->v4l2_dev, "Capture: Direct Mode\n");
-		aspeed_video_update(video, VE_CTRL, 0, VE_CTRL_DIRECT_FETCH);
+		aspeed_video_update(video, VE_CTRL,
+				    VE_CTRL_INT_DE | VE_CTRL_DIRECT_FETCH,
+				    VE_CTRL_DIRECT_FETCH);
 	}
 
 	size *= 4;
@@ -969,35 +1045,70 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
 
 static void aspeed_video_update_regs(struct aspeed_video *video)
 {
-	u32 comp_ctrl = VE_COMP_CTRL_RSVD |
-		FIELD_PREP(VE_COMP_CTRL_DCT_LUM, video->jpeg_quality) |
-		FIELD_PREP(VE_COMP_CTRL_DCT_CHR, video->jpeg_quality | 0x10);
+	u8 jpeg_hq_quality = clamp((int)video->jpeg_hq_quality - 1, 0,
+				   ASPEED_VIDEO_JPEG_NUM_QUALITIES - 1);
+	u32 comp_ctrl =	FIELD_PREP(VE_COMP_CTRL_DCT_LUM, video->jpeg_quality) |
+		FIELD_PREP(VE_COMP_CTRL_DCT_CHR, video->jpeg_quality | 0x10) |
+		FIELD_PREP(VE_COMP_CTRL_EN_HQ, video->hq_mode) |
+		FIELD_PREP(VE_COMP_CTRL_HQ_DCT_LUM, jpeg_hq_quality) |
+		FIELD_PREP(VE_COMP_CTRL_HQ_DCT_CHR, jpeg_hq_quality |
+			   0x10);
 	u32 ctrl = 0;
-	u32 seq_ctrl = VE_SEQ_CTRL_JPEG_MODE;
+	u32 seq_ctrl = 0;
 
-	v4l2_dbg(1, debug, &video->v4l2_dev, "framerate(%d)\n",
-		 video->frame_rate);
-	v4l2_dbg(1, debug, &video->v4l2_dev, "subsample(%s)\n",
+	v4l2_dbg(1, debug, &video->v4l2_dev, "framerate(%d)\n", video->frame_rate);
+	v4l2_dbg(1, debug, &video->v4l2_dev, "jpeg format(%s) subsample(%s)\n",
+		 format_str[video->format],
 		 video->yuv420 ? "420" : "444");
-	v4l2_dbg(1, debug, &video->v4l2_dev, "compression quality(%d)\n",
-		 video->jpeg_quality);
+	v4l2_dbg(1, debug, &video->v4l2_dev, "compression quality(%d) hq(%s) hq_quality(%d)\n",
+		 video->jpeg_quality, video->hq_mode ? "on" : "off",
+		 video->jpeg_hq_quality);
+	v4l2_dbg(1, debug, &video->v4l2_dev, "compression mode(%s)\n",
+		 compress_mode_str[video->compression_mode]);
+
+	if (video->format == VIDEO_FMT_ASPEED)
+		aspeed_video_update(video, VE_BCD_CTRL, 0, VE_BCD_CTRL_EN_BCD);
+	else
+		aspeed_video_update(video, VE_BCD_CTRL, VE_BCD_CTRL_EN_BCD, 0);
 
 	if (video->frame_rate)
 		ctrl |= FIELD_PREP(VE_CTRL_FRC, video->frame_rate);
 
+	if (video->format == VIDEO_FMT_STANDARD) {
+		comp_ctrl &= ~FIELD_PREP(VE_COMP_CTRL_EN_HQ, video->hq_mode);
+		seq_ctrl |= VE_SEQ_CTRL_JPEG_MODE;
+	}
+
 	if (video->yuv420)
 		seq_ctrl |= VE_SEQ_CTRL_YUV420;
 
 	if (video->jpeg.virt)
 		aspeed_video_update_jpeg_table(video->jpeg.virt, video->yuv420);
 
+#ifdef CONFIG_MACH_ASPEED_G4
+	switch (video->compression_mode) {
+	case 0:	//DCT only
+		comp_ctrl |= VE_COMP_CTRL_VQ_DCT_ONLY;
+		break;
+	case 1:	//DCT VQ mix 2-color
+		comp_ctrl &= ~(VE_COMP_CTRL_VQ_4COLOR | VE_COMP_CTRL_VQ_DCT_ONLY);
+		break;
+	case 2:	//DCT VQ mix 4-color
+		comp_ctrl |= VE_COMP_CTRL_VQ_4COLOR;
+		break;
+	}
+#endif
+
 	/* Set control registers */
 	aspeed_video_update(video, VE_SEQ_CTRL,
 			    VE_SEQ_CTRL_JPEG_MODE | VE_SEQ_CTRL_YUV420,
 			    seq_ctrl);
 	aspeed_video_update(video, VE_CTRL, VE_CTRL_FRC, ctrl);
 	aspeed_video_update(video, VE_COMP_CTRL,
-			    VE_COMP_CTRL_DCT_LUM | VE_COMP_CTRL_DCT_CHR,
+			    VE_COMP_CTRL_DCT_LUM | VE_COMP_CTRL_DCT_CHR |
+			    VE_COMP_CTRL_EN_HQ | VE_COMP_CTRL_HQ_DCT_LUM |
+			    VE_COMP_CTRL_HQ_DCT_CHR | VE_COMP_CTRL_VQ_4COLOR |
+			    VE_COMP_CTRL_VQ_DCT_ONLY,
 			    comp_ctrl);
 }
 
@@ -1029,6 +1140,8 @@ static void aspeed_video_init_regs(struct aspeed_video *video)
 
 	/* Set mode detection defaults */
 	aspeed_video_write(video, VE_MODE_DETECT, 0x22666500);
+
+	aspeed_video_write(video, VE_BCD_CTRL, 0);
 }
 
 static void aspeed_video_start(struct aspeed_video *video)
@@ -1062,6 +1175,9 @@ static void aspeed_video_stop(struct aspeed_video *video)
 	if (video->srcs[1].size)
 		aspeed_video_free_buf(video, &video->srcs[1]);
 
+	if (video->bcd.size)
+		aspeed_video_free_buf(video, &video->bcd);
+
 	video->v4l2_input_status = V4L2_IN_ST_NO_SIGNAL;
 	video->flags = 0;
 }
@@ -1080,10 +1196,12 @@ static int aspeed_video_querycap(struct file *file, void *fh,
 static int aspeed_video_enum_format(struct file *file, void *fh,
 				    struct v4l2_fmtdesc *f)
 {
+	struct aspeed_video *video = video_drvdata(file);
+
 	if (f->index)
 		return -EINVAL;
 
-	f->pixelformat = V4L2_PIX_FMT_JPEG;
+	f->pixelformat = video->pix_fmt.pixelformat;
 
 	return 0;
 }
@@ -1098,6 +1216,29 @@ static int aspeed_video_get_format(struct file *file, void *fh,
 	return 0;
 }
 
+static int aspeed_video_set_format(struct file *file, void *fh,
+				   struct v4l2_format *f)
+{
+	struct aspeed_video *video = video_drvdata(file);
+
+	if (vb2_is_busy(&video->queue))
+		return -EBUSY;
+
+	switch (f->fmt.pix.pixelformat) {
+	case V4L2_PIX_FMT_JPEG:
+		video->format = VIDEO_FMT_STANDARD;
+		break;
+	case V4L2_PIX_FMT_AJPG:
+		video->format = VIDEO_FMT_ASPEED;
+		break;
+	default:
+		return -EINVAL;
+	}
+	video->pix_fmt.pixelformat = f->fmt.pix.pixelformat;
+
+	return 0;
+}
+
 static int aspeed_video_enum_input(struct file *file, void *fh,
 				   struct v4l2_input *inp)
 {
@@ -1315,7 +1456,7 @@ static const struct v4l2_ioctl_ops aspeed_video_ioctl_ops = {
 
 	.vidioc_enum_fmt_vid_cap = aspeed_video_enum_format,
 	.vidioc_g_fmt_vid_cap = aspeed_video_get_format,
-	.vidioc_s_fmt_vid_cap = aspeed_video_get_format,
+	.vidioc_s_fmt_vid_cap = aspeed_video_set_format,
 	.vidioc_try_fmt_vid_cap = aspeed_video_get_format,
 
 	.vidioc_reqbufs = vb2_ioctl_reqbufs,
@@ -1364,6 +1505,23 @@ static int aspeed_video_set_ctrl(struct v4l2_ctrl *ctrl)
 		if (test_bit(VIDEO_STREAMING, &video->flags))
 			aspeed_video_update_regs(video);
 		break;
+#ifdef CONFIG_MACH_ASPEED_G4
+	case V4L2_CID_ASPEED_COMPRESSION_MODE:
+		video->compression_mode = ctrl->val;
+		if (test_bit(VIDEO_STREAMING, &video->flags))
+			aspeed_video_update_regs(video);
+		break;
+#endif
+	case V4L2_CID_ASPEED_HQ_MODE:
+		video->hq_mode = ctrl->val;
+		if (test_bit(VIDEO_STREAMING, &video->flags))
+			aspeed_video_update_regs(video);
+		break;
+	case V4L2_CID_ASPEED_HQ_JPEG_QUALITY:
+		video->jpeg_hq_quality = ctrl->val;
+		if (test_bit(VIDEO_STREAMING, &video->flags))
+			aspeed_video_update_regs(video);
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -1375,6 +1533,41 @@ static const struct v4l2_ctrl_ops aspeed_video_ctrl_ops = {
 	.s_ctrl = aspeed_video_set_ctrl,
 };
 
+#ifdef CONFIG_MACH_ASPEED_G4
+static const struct v4l2_ctrl_config aspeed_ctrl_compression_mode = {
+	.ops = &aspeed_video_ctrl_ops,
+	.id = V4L2_CID_ASPEED_COMPRESSION_MODE,
+	.name = "Aspeed Compression Mode",
+	.type = V4L2_CTRL_TYPE_INTEGER,
+	.min = 0,
+	.max = 2,
+	.step = 1,
+	.def = 0,
+};
+#endif
+
+static const struct v4l2_ctrl_config aspeed_ctrl_HQ_mode = {
+	.ops = &aspeed_video_ctrl_ops,
+	.id = V4L2_CID_ASPEED_HQ_MODE,
+	.name = "Aspeed HQ Mode",
+	.type = V4L2_CTRL_TYPE_BOOLEAN,
+	.min = false,
+	.max = true,
+	.step = 1,
+	.def = false,
+};
+
+static const struct v4l2_ctrl_config aspeed_ctrl_HQ_jpeg_quality = {
+	.ops = &aspeed_video_ctrl_ops,
+	.id = V4L2_CID_ASPEED_HQ_JPEG_QUALITY,
+	.name = "Aspeed HQ Quality",
+	.type = V4L2_CTRL_TYPE_INTEGER,
+	.min = 1,
+	.max = ASPEED_VIDEO_JPEG_NUM_QUALITIES,
+	.step = 1,
+	.def = 1,
+};
+
 static void aspeed_video_resolution_work(struct work_struct *work)
 {
 	struct delayed_work *dwork = to_delayed_work(work);
@@ -1597,7 +1790,6 @@ static int aspeed_video_debugfs_show(struct seq_file *s, void *data)
 		   (v->perf.totaltime && v->sequence) ?
 		   1000/(v->perf.totaltime/v->sequence) : 0);
 
-
 	return 0;
 }
 
@@ -1641,6 +1833,7 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
 	struct v4l2_device *v4l2_dev = &video->v4l2_dev;
 	struct vb2_queue *vbq = &video->queue;
 	struct video_device *vdev = &video->vdev;
+	struct v4l2_ctrl_handler *hdl = &video->ctrl_handler;
 	int rc;
 
 	video->pix_fmt.pixelformat = V4L2_PIX_FMT_JPEG;
@@ -1655,22 +1848,27 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
 		return rc;
 	}
 
-	v4l2_ctrl_handler_init(&video->ctrl_handler, 2);
-	v4l2_ctrl_new_std(&video->ctrl_handler, &aspeed_video_ctrl_ops,
-			  V4L2_CID_JPEG_COMPRESSION_QUALITY, 0,
-			  ASPEED_VIDEO_JPEG_NUM_QUALITIES - 1, 1, 0);
-	v4l2_ctrl_new_std_menu(&video->ctrl_handler, &aspeed_video_ctrl_ops,
+	v4l2_ctrl_handler_init(hdl, 6);
+	v4l2_ctrl_new_std(hdl, &aspeed_video_ctrl_ops,
+			  V4L2_CID_JPEG_COMPRESSION_QUALITY, 1,
+			  ASPEED_VIDEO_JPEG_NUM_QUALITIES, 1, 1);
+	v4l2_ctrl_new_std_menu(hdl, &aspeed_video_ctrl_ops,
 			       V4L2_CID_JPEG_CHROMA_SUBSAMPLING,
 			       V4L2_JPEG_CHROMA_SUBSAMPLING_420, mask,
 			       V4L2_JPEG_CHROMA_SUBSAMPLING_444);
+#ifdef CONFIG_MACH_ASPEED_G4
+	v4l2_ctrl_new_custom(hdl, &aspeed_ctrl_compression_mode, NULL);
+#endif
+	v4l2_ctrl_new_custom(hdl, &aspeed_ctrl_HQ_mode, NULL);
+	v4l2_ctrl_new_custom(hdl, &aspeed_ctrl_HQ_jpeg_quality, NULL);
 
-	rc = video->ctrl_handler.error;
+	rc = hdl->error;
 	if (rc) {
 		dev_err(video->dev, "Failed to init controls: %d\n", rc);
 		goto err_ctrl_init;
 	}
 
-	v4l2_dev->ctrl_handler = &video->ctrl_handler;
+	v4l2_dev->ctrl_handler = hdl;
 
 	vbq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
 	vbq->io_modes = VB2_MMAP | VB2_READ | VB2_DMABUF;
@@ -1801,6 +1999,7 @@ static int aspeed_video_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	video->frame_rate = 30;
+	video->jpeg_hq_quality = 1;
 	video->dev = &pdev->dev;
 	spin_lock_init(&video->lock);
 	mutex_init(&video->video_lock);
diff --git a/include/uapi/linux/aspeed-video.h b/include/uapi/linux/aspeed-video.h
new file mode 100644
index 000000000000..117bfeaaa83a
--- /dev/null
+++ b/include/uapi/linux/aspeed-video.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2021 ASPEED Technology Inc.
+ */
+
+#ifndef _UAPI_LINUX_ASPEED_VIDEO_H
+#define _UAPI_LINUX_ASPEED_VIDEO_H
+
+#include <linux/v4l2-controls.h>
+
+#define V4L2_CID_ASPEED_COMPRESSION_MODE	(V4L2_CID_USER_ASPEED_BASE  + 1)
+#define V4L2_CID_ASPEED_HQ_MODE			(V4L2_CID_USER_ASPEED_BASE  + 2)
+#define V4L2_CID_ASPEED_HQ_JPEG_QUALITY		(V4L2_CID_USER_ASPEED_BASE  + 3)
+
+#endif /* _UAPI_LINUX_ASPEED_VIDEO_H */
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH v4 8/9] media: aspeed: add comments and macro
  2021-11-15  7:44 [PATCH v4 0/9] add aspeed-jpeg support for aspeed-video Jammy Huang
                   ` (6 preceding siblings ...)
  2021-11-15  7:44 ` [PATCH v4 7/9] media: aspeed: Support aspeed mode to reduce compressed data Jammy Huang
@ 2021-11-15  7:44 ` Jammy Huang
  2021-11-15  7:44 ` [PATCH v4 9/9] media: aspeed: Extend debug message Jammy Huang
  8 siblings, 0 replies; 12+ messages in thread
From: Jammy Huang @ 2021-11-15  7:44 UTC (permalink / raw)
  To: eajames, mchehab, joel, andrew, hverkuil-cisco, sakari.ailus,
	gregkh, laurent.pinchart, linux-media, openbmc, linux-arm-kernel,
	linux-aspeed, linux-kernel

Add comments to describe video-stat and 'struct aspeed_video'.
Add macro, ASPEED_VIDEO_V4L2_MIN_BUF_REQ, to describe the buffers
needed.

Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
---
v4:
  - update comments
v3:
  - no update
v2:
  - no update
---
 drivers/media/platform/aspeed-video.c | 39 ++++++++++++++++++++++++---
 1 file changed, 36 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index a13214e32454..00730bdda561 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -33,6 +33,8 @@
 #include <linux/videodev2.h>
 #include <uapi/linux/aspeed-video.h>
 
+#define ASPEED_VIDEO_V4L2_MIN_BUF_REQ 3
+
 #define DEVICE_NAME			"aspeed-video"
 
 #define ASPEED_VIDEO_JPEG_NUM_QUALITIES	12
@@ -197,6 +199,15 @@
 #define VE_MEM_RESTRICT_START		0x310
 #define VE_MEM_RESTRICT_END		0x314
 
+/*
+ * @VIDEO_MODE_DETECT_DONE:	a flag raised if signal lock
+ * @VIDEO_RES_CHANGE:		a flag raised if res_change work on-going
+ * @VIDEO_RES_DETECT:		a flag raised if res. detection on-going
+ * @VIDEO_STREAMING:		a flag raised if user requires stream-on
+ * @VIDEO_FRAME_INPRG:		a flag raised if hw working on a frame
+ * @VIDEO_STOPPED:		a flag raised if device release
+ * @VIDEO_CLOCKS_ON:		a flag raised if clk is on
+ */
 enum {
 	VIDEO_MODE_DETECT_DONE,
 	VIDEO_RES_CHANGE,
@@ -235,6 +246,28 @@ struct aspeed_video_perf {
 #define to_aspeed_video_buffer(x) \
 	container_of((x), struct aspeed_video_buffer, vb)
 
+/**
+ * struct aspeed_video - driver data
+ *
+ * @flags:		holds the state of video
+ * @sequence:		holds the last number of frame completed
+ * @max_compressed_size:holds max compressed stream's size
+ * @srcs:		holds the buffer information for srcs
+ * @jpeg:		holds the buffer information for jpeg header
+ * @bcd:		holds the buffer information for bcd work
+ * @yuv420:		a flag raised if JPEG subsampling is 420
+ * @format:		holds the video format
+ * @hq_mode:		a flag raised if HQ is enabled. Only for VIDEO_FMT_ASPEED
+ * @frame_rate:		holds the frame_rate
+ * @jpeg_quality:	holds jpeq's quality (0~11)
+ * @jpeg_hq_quality:	holds hq's quality (0~11) only if hq_mode enabled
+ * @compression_mode:	holds jpeg compression mode
+ * @frame_bottom:	end position of video data in vertical direction
+ * @frame_left:		start position of video data in horizontal direction
+ * @frame_right:	end position of video data in horizontal direction
+ * @frame_top:		start position of video data in vertical direction
+ * @perf:		holds the statistics primary for debugfs
+ */
 struct aspeed_video {
 	void __iomem *base;
 	struct clk *eclk;
@@ -1276,7 +1309,7 @@ static int aspeed_video_get_parm(struct file *file, void *fh,
 	struct aspeed_video *video = video_drvdata(file);
 
 	a->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
-	a->parm.capture.readbuffers = 3;
+	a->parm.capture.readbuffers = ASPEED_VIDEO_V4L2_MIN_BUF_REQ;
 	a->parm.capture.timeperframe.numerator = 1;
 	if (!video->frame_rate)
 		a->parm.capture.timeperframe.denominator = MAX_FRAME_RATE;
@@ -1293,7 +1326,7 @@ static int aspeed_video_set_parm(struct file *file, void *fh,
 	struct aspeed_video *video = video_drvdata(file);
 
 	a->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
-	a->parm.capture.readbuffers = 3;
+	a->parm.capture.readbuffers = ASPEED_VIDEO_V4L2_MIN_BUF_REQ;
 
 	if (a->parm.capture.timeperframe.numerator)
 		frame_rate = a->parm.capture.timeperframe.denominator /
@@ -1879,7 +1912,7 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
 	vbq->drv_priv = video;
 	vbq->buf_struct_size = sizeof(struct aspeed_video_buffer);
 	vbq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
-	vbq->min_buffers_needed = 3;
+	vbq->min_buffers_needed = ASPEED_VIDEO_V4L2_MIN_BUF_REQ;
 
 	rc = vb2_queue_init(vbq);
 	if (rc) {
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH v4 9/9] media: aspeed: Extend debug message
  2021-11-15  7:44 [PATCH v4 0/9] add aspeed-jpeg support for aspeed-video Jammy Huang
                   ` (7 preceding siblings ...)
  2021-11-15  7:44 ` [PATCH v4 8/9] media: aspeed: add comments and macro Jammy Huang
@ 2021-11-15  7:44 ` Jammy Huang
  8 siblings, 0 replies; 12+ messages in thread
From: Jammy Huang @ 2021-11-15  7:44 UTC (permalink / raw)
  To: eajames, mchehab, joel, andrew, hverkuil-cisco, sakari.ailus,
	gregkh, laurent.pinchart, linux-media, openbmc, linux-arm-kernel,
	linux-aspeed, linux-kernel

updated as below:

Capture:
  Mode                : Direct fetch
  VGA bpp mode        : 32
  Signal              : lock
  Width               : 1920
  Height              : 1080
  FRC                 : 0

Compression:
  Format              : JPEG
  Subsampling         : 444
  Quality             : 4
  HQ Mode             : N/A
  HQ Quality          : 0
  Mode                : N/A

Performance:
  Frame#              : 4
  Frame Duration(ms)  :
    Now               : 22
    Min               : 21
    Max               : 22
  FPS                 : 45

Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
---
v4:
  - update debugfs log
v3:
  - no update
v2:
  - update commit message
---
 drivers/media/platform/aspeed-video.c | 33 +++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index 00730bdda561..1b7ec8d1884b 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -1801,10 +1801,29 @@ static const struct vb2_ops aspeed_video_vb2_ops = {
 static int aspeed_video_debugfs_show(struct seq_file *s, void *data)
 {
 	struct aspeed_video *v = s->private;
+	u32 val08;
 
 	seq_puts(s, "\n");
 
 	seq_puts(s, "Capture:\n");
+	val08 = aspeed_video_read(v, VE_CTRL);
+	if (FIELD_GET(VE_CTRL_DIRECT_FETCH, val08)) {
+		seq_printf(s, "  %-20s:\tDirect fetch\n", "Mode");
+		seq_printf(s, "  %-20s:\t%s\n", "VGA bpp mode",
+			   FIELD_GET(VE_CTRL_INT_DE, val08) ? "16" : "32");
+	} else {
+		seq_printf(s, "  %-20s:\tSync\n", "Mode");
+		seq_printf(s, "  %-20s:\t%s\n", "Video source",
+			   FIELD_GET(VE_CTRL_SOURCE, val08) ?
+			   "external" : "internal");
+		seq_printf(s, "  %-20s:\t%s\n", "DE source",
+			   FIELD_GET(VE_CTRL_INT_DE, val08) ?
+			   "internal" : "external");
+		seq_printf(s, "  %-20s:\t%s\n", "Cursor overlay",
+			   FIELD_GET(VE_CTRL_AUTO_OR_CURSOR, val08) ?
+			   "Without" : "With");
+	}
+
 	seq_printf(s, "  %-20s:\t%s\n", "Signal",
 		   v->v4l2_input_status ? "Unlock" : "Lock");
 	seq_printf(s, "  %-20s:\t%d\n", "Width", v->pix_fmt.width);
@@ -1813,6 +1832,20 @@ static int aspeed_video_debugfs_show(struct seq_file *s, void *data)
 
 	seq_puts(s, "\n");
 
+	seq_puts(s, "Compression:\n");
+	seq_printf(s, "  %-20s:\t%s\n", "Format", format_str[v->format]);
+	seq_printf(s, "  %-20s:\t%s\n", "Subsampling",
+		   v->yuv420 ? "420" : "444");
+	seq_printf(s, "  %-20s:\t%d\n", "Quality", v->jpeg_quality);
+	seq_printf(s, "  %-20s:\t%s\n", "HQ Mode",
+		   (v->format == VIDEO_FMT_ASPEED) ? (v->hq_mode ? "on" : "off") : "N/A");
+	seq_printf(s, "  %-20s:\t%d\n", "HQ Quality", v->jpeg_hq_quality);
+	seq_printf(s, "  %-20s:\t%s\n", "Mode",
+		   (v->format == VIDEO_FMT_ASPEED) ?
+		   compress_mode_str[v->compression_mode] : "N/A");
+
+	seq_puts(s, "\n");
+
 	seq_puts(s, "Performance:\n");
 	seq_printf(s, "  %-20s:\t%d\n", "Frame#", v->sequence);
 	seq_printf(s, "  %-20s:\n", "Frame Duration(ms)");
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* Re: [PATCH v4 7/9] media: aspeed: Support aspeed mode to reduce compressed data
  2021-11-15  7:44 ` [PATCH v4 7/9] media: aspeed: Support aspeed mode to reduce compressed data Jammy Huang
@ 2021-11-15  8:19   ` Sakari Ailus
  2021-11-16  4:15     ` Jammy Huang
  0 siblings, 1 reply; 12+ messages in thread
From: Sakari Ailus @ 2021-11-15  8:19 UTC (permalink / raw)
  To: Jammy Huang
  Cc: eajames, mchehab, joel, andrew, hverkuil-cisco, gregkh,
	laurent.pinchart, linux-media, openbmc, linux-arm-kernel,
	linux-aspeed, linux-kernel

Hi Jammy,

Thanks for the patch. A few comments below...

On Mon, Nov 15, 2021 at 03:44:35PM +0800, Jammy Huang wrote:
> @@ -969,35 +1045,70 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
>  
>  static void aspeed_video_update_regs(struct aspeed_video *video)
>  {
> -	u32 comp_ctrl = VE_COMP_CTRL_RSVD |
> -		FIELD_PREP(VE_COMP_CTRL_DCT_LUM, video->jpeg_quality) |
> -		FIELD_PREP(VE_COMP_CTRL_DCT_CHR, video->jpeg_quality | 0x10);
> +	u8 jpeg_hq_quality = clamp((int)video->jpeg_hq_quality - 1, 0,
> +				   ASPEED_VIDEO_JPEG_NUM_QUALITIES - 1);
> +	u32 comp_ctrl =	FIELD_PREP(VE_COMP_CTRL_DCT_LUM, video->jpeg_quality) |
> +		FIELD_PREP(VE_COMP_CTRL_DCT_CHR, video->jpeg_quality | 0x10) |
> +		FIELD_PREP(VE_COMP_CTRL_EN_HQ, video->hq_mode) |
> +		FIELD_PREP(VE_COMP_CTRL_HQ_DCT_LUM, jpeg_hq_quality) |
> +		FIELD_PREP(VE_COMP_CTRL_HQ_DCT_CHR, jpeg_hq_quality |
> +			   0x10);
>  	u32 ctrl = 0;
> -	u32 seq_ctrl = VE_SEQ_CTRL_JPEG_MODE;
> +	u32 seq_ctrl = 0;
>  
> -	v4l2_dbg(1, debug, &video->v4l2_dev, "framerate(%d)\n",
> -		 video->frame_rate);
> -	v4l2_dbg(1, debug, &video->v4l2_dev, "subsample(%s)\n",
> +	v4l2_dbg(1, debug, &video->v4l2_dev, "framerate(%d)\n", video->frame_rate);
> +	v4l2_dbg(1, debug, &video->v4l2_dev, "jpeg format(%s) subsample(%s)\n",
> +		 format_str[video->format],
>  		 video->yuv420 ? "420" : "444");
> -	v4l2_dbg(1, debug, &video->v4l2_dev, "compression quality(%d)\n",
> -		 video->jpeg_quality);
> +	v4l2_dbg(1, debug, &video->v4l2_dev, "compression quality(%d) hq(%s) hq_quality(%d)\n",
> +		 video->jpeg_quality, video->hq_mode ? "on" : "off",
> +		 video->jpeg_hq_quality);
> +	v4l2_dbg(1, debug, &video->v4l2_dev, "compression mode(%s)\n",
> +		 compress_mode_str[video->compression_mode]);
> +
> +	if (video->format == VIDEO_FMT_ASPEED)
> +		aspeed_video_update(video, VE_BCD_CTRL, 0, VE_BCD_CTRL_EN_BCD);
> +	else
> +		aspeed_video_update(video, VE_BCD_CTRL, VE_BCD_CTRL_EN_BCD, 0);
>  
>  	if (video->frame_rate)
>  		ctrl |= FIELD_PREP(VE_CTRL_FRC, video->frame_rate);
>  
> +	if (video->format == VIDEO_FMT_STANDARD) {
> +		comp_ctrl &= ~FIELD_PREP(VE_COMP_CTRL_EN_HQ, video->hq_mode);
> +		seq_ctrl |= VE_SEQ_CTRL_JPEG_MODE;
> +	}
> +
>  	if (video->yuv420)
>  		seq_ctrl |= VE_SEQ_CTRL_YUV420;
>  
>  	if (video->jpeg.virt)
>  		aspeed_video_update_jpeg_table(video->jpeg.virt, video->yuv420);
>  
> +#ifdef CONFIG_MACH_ASPEED_G4

This would be better done based on the device recognised, not the selected
compile target. The same goes for the rest of the conditional pre-processor
bits.

> +	switch (video->compression_mode) {
> +	case 0:	//DCT only
> +		comp_ctrl |= VE_COMP_CTRL_VQ_DCT_ONLY;
> +		break;
> +	case 1:	//DCT VQ mix 2-color
> +		comp_ctrl &= ~(VE_COMP_CTRL_VQ_4COLOR | VE_COMP_CTRL_VQ_DCT_ONLY);
> +		break;
> +	case 2:	//DCT VQ mix 4-color
> +		comp_ctrl |= VE_COMP_CTRL_VQ_4COLOR;
> +		break;
> +	}
> +#endif
> +

-- 
Kind regards,

Sakari Ailus

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v4 7/9] media: aspeed: Support aspeed mode to reduce compressed data
  2021-11-15  8:19   ` Sakari Ailus
@ 2021-11-16  4:15     ` Jammy Huang
  0 siblings, 0 replies; 12+ messages in thread
From: Jammy Huang @ 2021-11-16  4:15 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: eajames, mchehab, joel, andrew, hverkuil-cisco, gregkh,
	laurent.pinchart, linux-media, openbmc, linux-arm-kernel,
	linux-aspeed, linux-kernel

Hi Sakari,

OK, I will add a patch which uses data in device table to tell the 
differences between
SoC to the series. Thanks for your advice.

On 2021/11/15 下午 04:19, Sakari Ailus wrote:
> Hi Jammy,
>
> Thanks for the patch. A few comments below...
>
> On Mon, Nov 15, 2021 at 03:44:35PM +0800, Jammy Huang wrote:
>> @@ -969,35 +1045,70 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
>>   
>>   static void aspeed_video_update_regs(struct aspeed_video *video)
>>   {
>> -	u32 comp_ctrl = VE_COMP_CTRL_RSVD |
>> -		FIELD_PREP(VE_COMP_CTRL_DCT_LUM, video->jpeg_quality) |
>> -		FIELD_PREP(VE_COMP_CTRL_DCT_CHR, video->jpeg_quality | 0x10);
>> +	u8 jpeg_hq_quality = clamp((int)video->jpeg_hq_quality - 1, 0,
>> +				   ASPEED_VIDEO_JPEG_NUM_QUALITIES - 1);
>> +	u32 comp_ctrl =	FIELD_PREP(VE_COMP_CTRL_DCT_LUM, video->jpeg_quality) |
>> +		FIELD_PREP(VE_COMP_CTRL_DCT_CHR, video->jpeg_quality | 0x10) |
>> +		FIELD_PREP(VE_COMP_CTRL_EN_HQ, video->hq_mode) |
>> +		FIELD_PREP(VE_COMP_CTRL_HQ_DCT_LUM, jpeg_hq_quality) |
>> +		FIELD_PREP(VE_COMP_CTRL_HQ_DCT_CHR, jpeg_hq_quality |
>> +			   0x10);
>>   	u32 ctrl = 0;
>> -	u32 seq_ctrl = VE_SEQ_CTRL_JPEG_MODE;
>> +	u32 seq_ctrl = 0;
>>   
>> -	v4l2_dbg(1, debug, &video->v4l2_dev, "framerate(%d)\n",
>> -		 video->frame_rate);
>> -	v4l2_dbg(1, debug, &video->v4l2_dev, "subsample(%s)\n",
>> +	v4l2_dbg(1, debug, &video->v4l2_dev, "framerate(%d)\n", video->frame_rate);
>> +	v4l2_dbg(1, debug, &video->v4l2_dev, "jpeg format(%s) subsample(%s)\n",
>> +		 format_str[video->format],
>>   		 video->yuv420 ? "420" : "444");
>> -	v4l2_dbg(1, debug, &video->v4l2_dev, "compression quality(%d)\n",
>> -		 video->jpeg_quality);
>> +	v4l2_dbg(1, debug, &video->v4l2_dev, "compression quality(%d) hq(%s) hq_quality(%d)\n",
>> +		 video->jpeg_quality, video->hq_mode ? "on" : "off",
>> +		 video->jpeg_hq_quality);
>> +	v4l2_dbg(1, debug, &video->v4l2_dev, "compression mode(%s)\n",
>> +		 compress_mode_str[video->compression_mode]);
>> +
>> +	if (video->format == VIDEO_FMT_ASPEED)
>> +		aspeed_video_update(video, VE_BCD_CTRL, 0, VE_BCD_CTRL_EN_BCD);
>> +	else
>> +		aspeed_video_update(video, VE_BCD_CTRL, VE_BCD_CTRL_EN_BCD, 0);
>>   
>>   	if (video->frame_rate)
>>   		ctrl |= FIELD_PREP(VE_CTRL_FRC, video->frame_rate);
>>   
>> +	if (video->format == VIDEO_FMT_STANDARD) {
>> +		comp_ctrl &= ~FIELD_PREP(VE_COMP_CTRL_EN_HQ, video->hq_mode);
>> +		seq_ctrl |= VE_SEQ_CTRL_JPEG_MODE;
>> +	}
>> +
>>   	if (video->yuv420)
>>   		seq_ctrl |= VE_SEQ_CTRL_YUV420;
>>   
>>   	if (video->jpeg.virt)
>>   		aspeed_video_update_jpeg_table(video->jpeg.virt, video->yuv420);
>>   
>> +#ifdef CONFIG_MACH_ASPEED_G4
> This would be better done based on the device recognised, not the selected
> compile target. The same goes for the rest of the conditional pre-processor
> bits.
>
>> +	switch (video->compression_mode) {
>> +	case 0:	//DCT only
>> +		comp_ctrl |= VE_COMP_CTRL_VQ_DCT_ONLY;
>> +		break;
>> +	case 1:	//DCT VQ mix 2-color
>> +		comp_ctrl &= ~(VE_COMP_CTRL_VQ_4COLOR | VE_COMP_CTRL_VQ_DCT_ONLY);
>> +		break;
>> +	case 2:	//DCT VQ mix 4-color
>> +		comp_ctrl |= VE_COMP_CTRL_VQ_4COLOR;
>> +		break;
>> +	}
>> +#endif
>> +

-- 
Best Regards
Jammy


^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2021-11-16  4:18 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-15  7:44 [PATCH v4 0/9] add aspeed-jpeg support for aspeed-video Jammy Huang
2021-11-15  7:44 ` [PATCH v4 1/9] media: aspeed: move err-handling together to the bottom Jammy Huang
2021-11-15  7:44 ` [PATCH v4 2/9] media: aspeed: use v4l2_info/v4l2_warn/v4l2_dbg for log Jammy Huang
2021-11-15  7:44 ` [PATCH v4 3/9] media: aspeed: add more debug log messages Jammy Huang
2021-11-15  7:44 ` [PATCH v4 4/9] media: aspeed: refactor to gather format/compress settings Jammy Huang
2021-11-15  7:44 ` [PATCH v4 5/9] media: v4l: Add definition for the Aspeed JPEG format Jammy Huang
2021-11-15  7:44 ` [PATCH v4 6/9] media: v4l2-ctrls: Reserve controls for ASPEED Jammy Huang
2021-11-15  7:44 ` [PATCH v4 7/9] media: aspeed: Support aspeed mode to reduce compressed data Jammy Huang
2021-11-15  8:19   ` Sakari Ailus
2021-11-16  4:15     ` Jammy Huang
2021-11-15  7:44 ` [PATCH v4 8/9] media: aspeed: add comments and macro Jammy Huang
2021-11-15  7:44 ` [PATCH v4 9/9] media: aspeed: Extend debug message Jammy Huang

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).