[PATCH v10 0/5] Add Xilinx AMS Driver

[PATCH v10 0/5] Add Xilinx AMS Driver

[Anand Ashok Dumbre]

Add Xilinx AMS driver which is used for Xilinx's ZynqMP AMS controller.
This AMS driver is used to report various interface voltages and temperatures
across the system.
This driver will be used by iio-hwmon to repport voltages and temperatures
across the system by using various channel interfaces.
This driver handles AMS module including PS-Sysmon & PL-Sysmon. The binding
documentation is added for understanding of AMS, PS, PL Sysmon Channels.

Changes in v2:
	- Added documentation for sysfs (Patch-2)
	- Addressed code style review comments
	- Patch-2 (Now it is Patch-3)
		- Arranged the includes in alphabetical order
		- Removed the wrapper 'ams_pl_write_reg()' and used writel
		  instead
		- Removed the unnecessary delay of 1ms and used polling of EOC
		  instead
		- Removed spin_lock and used mutex only.
		- Used request_irq() instead of devm_request_irq() and handled
		  respective error conditions
		- Moved contents of xilinx-ams.h to inline with xilinx-ams.c
	- Patch-1
		- Addressed Documentation style comments

Changes in v3:
	- Updated bindings document with the suggested modification in v2 review
	- Removed documentation for sysfs
	- Removed extended names for channels in the Xilinx AMS driver
	- Modified dts to use ranges for child nodes
	- Reduced address and size cells to 32-bit instead of 64-bit

Changes in v4:
	- Updated bindings document with the suggested modification in v3 review
	- Changed the Device Tree property 'ranges' for child nodes
	- Used Channel Numbers as 'reg' value in DT to avoid confusion
	- Removed unused NULL arguments as suggested in v3 patch review
	- Addressed comments on Device Tree property naming

Changes in v5:
	- Updated bindings document to the YAML format
	- Updated bindings document with the suggested modification in v4 review
	- Renamed iio_pl_info struct to iio_ams_info in Xilinx AMS driver
	- Updated the Xilinx AMS driver to not use iio_priv_to_dev function
	- Updated Xilinx AMS node to reflect the changes in bindings document
	- Update MAINTAINERS file

Changes in v6:
	- Removed all tabs from bindings document.
	- Removed the xlnx,ext-channels node from the device tree since
	  it is not neeeded.
	- Fixed unit addresses for ps-ams and pl-ams.
	- Removed the names property from bindings.
	- Fixed warnings from checkpatch.pl in the driver.
	- devm_add_action_or_reset() used for exit/error path.
	- devm_request_irq() for managed irq request instead of
	  request_irq()

Changes in v7:
	- Added use of FIELD_PREP and FIELD_GET.
	- Added the spinlocks back the v1 which were removed in v2 for
	  no justifiable reason and replaced with the same mutex. This
	  caused deadlocks.
	- Removed the buffered mode information from channel config.
	- Usage of wrapper functions for devm_add_action_or_reset
	  callbacks to avoid typecasting functions.
	- Usage of devm_platform_iremap_resource().
	- Handled platform_get_irq() return values.
	- Removed the remove() callback.
	- Fixed the dt-bindings.

Changes in v8:
	- Replaced *_of_() APIs with fwnode.
	- Added missing headers.
	- Fixed documentation.
	- Added devm_add_action_or_reset() for iounmap.
	- Restructured read_raw function.
	- Added helper functions.
	- Usage of GENMASK for all masks.
	- Added defaults for most switch cases. Some can't be added
	  since the default will never occur.

Changes in v9:
	- Added a fwnode_iomap().
	- Fixed Kconfig indentation.
	- Added the overflow checks before memory allocation.
	- Usage of fwnode_iomap() instead of iomap().
	- Rename ams_parse_dt() to ams_parse_firmware().

Changes in v10:
	- Fixed licence in zynqmp.dtsi.
	- Changed the macros to use BIT().
	- Realign some code to fit within 100 chars.
	- Modified readl_poll_timeout usage.
	- Usage of array_size() instead of check_mul_overflow().
	- Usage of dev_err_probe() instead of dev_err().
	- Usage of kcalloc instead of kzalloc()


Anand Ashok Dumbre (5):
  device property: Add fwnode_iomap()
  arm64: zynqmp: DT: Add Xilinx AMS node
  iio: adc: Add Xilinx AMS driver
  dt-bindings: iio: adc: Add Xilinx AMS binding documentation
  MAINTAINERS: Add maintainer for xilinx-ams

 .../bindings/iio/adc/xlnx,zynqmp-ams.yaml     |  227 +++
 MAINTAINERS                                   |    7 +
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi        |   24 +
 drivers/base/property.c                       |   16 +
 drivers/iio/adc/Kconfig                       |   15 +
 drivers/iio/adc/Makefile                      |    1 +
 drivers/iio/adc/xilinx-ams.c                  | 1447 +++++++++++++++++
 include/linux/property.h                      |    2 +
 8 files changed, 1739 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
 create mode 100644 drivers/iio/adc/xilinx-ams.c

-- 
2.17.1

[PATCH v10 1/5] device property: Add fwnode_iomap()

[Anand Ashok Dumbre]

This patch introduces a new helper routine - fwnode_iomap(), which
allows to map the memory mapped IO for a given device node.

This implementation does not cover the ACPI case and may be expanded
in the future. The main purpose here is to be able to develop resource
provider agnostic drivers.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/base/property.c  | 16 ++++++++++++++++
 include/linux/property.h |  2 ++
 2 files changed, 18 insertions(+)

diff --git a/drivers/base/property.c b/drivers/base/property.c
index f1f35b48ab8b..f2e38be3a999 100644
--- a/drivers/base/property.c
+++ b/drivers/base/property.c
@@ -958,6 +958,22 @@ int fwnode_irq_get(const struct fwnode_handle *fwnode, unsigned int index)
 }
 EXPORT_SYMBOL(fwnode_irq_get);
 
+/**
+ * fwnode_iomap - Maps the memory mapped IO for a given fwnode
+ * @fwnode:	Pointer to the firmware node
+ * @index:	Index of the IO range
+ *
+ * Returns a pointer to the mapped memory.
+ */
+void __iomem *fwnode_iomap(struct fwnode_handle *fwnode, int index)
+{
+	if (is_of_node(fwnode))
+		return of_iomap(to_of_node(fwnode), index);
+
+	return NULL;
+}
+EXPORT_SYMBOL(fwnode_iomap);
+
 /**
  * fwnode_graph_get_next_endpoint - Get next endpoint firmware node
  * @fwnode: Pointer to the parent firmware node
diff --git a/include/linux/property.h b/include/linux/property.h
index 88fa726a76df..6670d5a1ec2a 100644
--- a/include/linux/property.h
+++ b/include/linux/property.h
@@ -122,6 +122,8 @@ void fwnode_handle_put(struct fwnode_handle *fwnode);
 
 int fwnode_irq_get(const struct fwnode_handle *fwnode, unsigned int index);
 
+void __iomem *fwnode_iomap(struct fwnode_handle *fwnode, int index);
+
 unsigned int device_get_child_node_count(struct device *dev);
 
 static inline bool device_property_read_bool(struct device *dev,
-- 
2.17.1

[PATCH v10 2/5] arm64: zynqmp: DT: Add Xilinx AMS node

[Anand Ashok Dumbre]

The Xilinx AMS includes an ADC as well as on-chip sensors that can be
used to sample external and monitor on-die operating conditions, such as
temperature and supply voltage levels.

Co-developed-by: Manish Narani <manish.narani@xilinx.com>
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
---
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 74e66443e4ce..ab96708fe65e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -878,6 +878,30 @@
 			timeout-sec = <10>;
 		};
 
+		xilinx_ams: ams@ffa50000 {
+			compatible = "xlnx,zynqmp-ams";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <0 56 4>;
+			reg = <0x0 0xffa50000 0x0 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#io-channel-cells = <1>;
+			ranges = <0 0 0xffa50800 0x800>;
+
+			ams_ps: ams-ps@0 {
+				compatible = "xlnx,zynqmp-ams-ps";
+				status = "disabled";
+				reg = <0 0x400>;
+			};
+
+			ams_pl: ams-pl@400 {
+				compatible = "xlnx,zynqmp-ams-pl";
+				status = "disabled";
+				reg = <0x400 0x400>;
+			};
+		};
+
 		zynqmp_dpdma: dma-controller@fd4c0000 {
 			compatible = "xlnx,zynqmp-dpdma";
 			status = "disabled";
-- 
2.17.1

[PATCH v10 3/5] iio: adc: Add Xilinx AMS driver

[Anand Ashok Dumbre]

The AMS includes an ADC as well as on-chip sensors that can be used to
sample external voltages and monitor on-die operating conditions, such
as temperature and supply voltage levels. The AMS has two SYSMON blocks.
PL-SYSMON block is capable of monitoring off chip voltage and
temperature.

PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring
from an external master. Out of these interfaces currently only DRP is
supported. Other block PS-SYSMON is memory mapped to PS.

The AMS can use internal channels to monitor voltage and temperature as
well as one primary and up to 16 auxiliary channels for measuring
external voltages.

The voltage and temperature monitoring channels also have event capability
which allows to generate an interrupt when their value falls below or
raises above a set threshold.

Co-developed-by: Manish Narani <manish.narani@xilinx.com>
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
---
 drivers/iio/adc/Kconfig      |   15 +
 drivers/iio/adc/Makefile     |    1 +
 drivers/iio/adc/xilinx-ams.c | 1447 ++++++++++++++++++++++++++++++++++
 3 files changed, 1463 insertions(+)
 create mode 100644 drivers/iio/adc/xilinx-ams.c

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 8bf5b62a73f4..f6efe11ea1a8 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -1288,4 +1288,19 @@ config XILINX_XADC
 	  The driver can also be build as a module. If so, the module will be called
 	  xilinx-xadc.
 
+config XILINX_AMS
+	tristate "Xilinx AMS driver"
+	depends on ARCH_ZYNQMP || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Say yes here to have support for the Xilinx AMS for Ultrascale/Ultrascale+
+	  System Monitor. With this you can measure and monitor the Voltages and
+	  Temperature values on the SOC.
+
+	  The driver supports Voltage and Temperature monitoring on Xilinx Ultrascale
+	  devices.
+
+	  The driver can also be built as a module. If so, the module will be called
+	  xilinx-ams.
+
 endmenu
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index d3f53549720c..4a8f1833993b 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -115,4 +115,5 @@ obj-$(CONFIG_VF610_ADC) += vf610_adc.o
 obj-$(CONFIG_VIPERBOARD_ADC) += viperboard_adc.o
 xilinx-xadc-y := xilinx-xadc-core.o xilinx-xadc-events.o
 obj-$(CONFIG_XILINX_XADC) += xilinx-xadc.o
+obj-$(CONFIG_XILINX_AMS) += xilinx-ams.o
 obj-$(CONFIG_SD_ADC_MODULATOR) += sd_adc_modulator.o
diff --git a/drivers/iio/adc/xilinx-ams.c b/drivers/iio/adc/xilinx-ams.c
new file mode 100644
index 000000000000..bb3876b51e3e
--- /dev/null
+++ b/drivers/iio/adc/xilinx-ams.c
@@ -0,0 +1,1447 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx AMS driver
+ *
+ *  Copyright (C) 2021 Xilinx, Inc.
+ *
+ *  Manish Narani <mnarani@xilinx.com>
+ *  Rajnikant Bhojani <rajnikant.bhojani@xilinx.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/overflow.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+/* AMS registers definitions */
+#define AMS_ISR_0			0x010
+#define AMS_ISR_1			0x014
+#define AMS_IER_0			0x020
+#define AMS_IER_1			0x024
+#define AMS_IDR_0			0x028
+#define AMS_IDR_1			0x02c
+#define AMS_PS_CSTS			0x040
+#define AMS_PL_CSTS			0x044
+
+#define AMS_VCC_PSPLL0			0x060
+#define AMS_VCC_PSPLL3			0x06C
+#define AMS_VCCINT			0x078
+#define AMS_VCCBRAM			0x07C
+#define AMS_VCCAUX			0x080
+#define AMS_PSDDRPLL			0x084
+#define AMS_PSINTFPDDR			0x09C
+
+#define AMS_VCC_PSPLL0_CH		48
+#define AMS_VCC_PSPLL3_CH		51
+#define AMS_VCCINT_CH			54
+#define AMS_VCCBRAM_CH			55
+#define AMS_VCCAUX_CH			56
+#define AMS_PSDDRPLL_CH			57
+#define AMS_PSINTFPDDR_CH		63
+
+#define AMS_REG_CONFIG0			0x100
+#define AMS_REG_CONFIG1			0x104
+#define AMS_REG_CONFIG3			0x10C
+#define AMS_REG_CONFIG4			0x110
+#define AMS_REG_SEQ_CH0			0x120
+#define AMS_REG_SEQ_CH1			0x124
+#define AMS_REG_SEQ_CH2			0x118
+
+#define AMS_VUSER0_MASK			BIT(0)
+#define AMS_VUSER1_MASK			BIT(1)
+#define AMS_VUSER2_MASK			BIT(2)
+#define AMS_VUSER3_MASK			BIT(3)
+
+#define AMS_TEMP			0x000
+#define AMS_SUPPLY1			0x004
+#define AMS_SUPPLY2			0x008
+#define AMS_VP_VN			0x00c
+#define AMS_VREFP			0x010
+#define AMS_VREFN			0x014
+#define AMS_SUPPLY3			0x018
+#define AMS_SUPPLY4			0x034
+#define AMS_SUPPLY5			0x038
+#define AMS_SUPPLY6			0x03c
+#define AMS_SUPPLY7			0x200
+#define AMS_SUPPLY8			0x204
+#define AMS_SUPPLY9			0x208
+#define AMS_SUPPLY10			0x20c
+#define AMS_VCCAMS			0x210
+#define AMS_TEMP_REMOTE			0x214
+
+#define AMS_REG_VAUX(x)			(0x40 + 4 * (x))
+
+#define AMS_PS_RESET_VALUE		0xFFFF
+#define AMS_PL_RESET_VALUE		0xFFFF
+
+#define AMS_CONF0_CHANNEL_NUM_MASK	GENMASK(6, 0)
+
+#define AMS_CONF1_SEQ_MASK		GENMASK(15, 12)
+#define AMS_CONF1_SEQ_DEFAULT		FIELD_PREP(AMS_CONF1_SEQ_MASK, 0)
+#define AMS_CONF1_SEQ_CONTINUOUS	FIELD_PREP(AMS_CONF1_SEQ_MASK, 1)
+#define AMS_CONF1_SEQ_SINGLE_CHANNEL	FIELD_PREP(AMS_CONF1_SEQ_MASK, 2)
+
+#define AMS_REG_SEQ0_MASK		GENMASK(15, 0)
+#define AMS_REG_SEQ2_MASK		GENMASK(21, 16)
+#define AMS_REG_SEQ1_MASK		GENMASK(37, 22)
+
+#define AMS_PS_SEQ_MASK			GENMASK(21, 0)
+#define AMS_PL_SEQ_MASK			GENMASK(59, 22)
+
+#define AMS_ALARM_TEMP			0x140
+#define AMS_ALARM_SUPPLY1		0x144
+#define AMS_ALARM_SUPPLY2		0x148
+#define AMS_ALARM_SUPPLY3		0x160
+#define AMS_ALARM_SUPPLY4		0x164
+#define AMS_ALARM_SUPPLY5		0x168
+#define AMS_ALARM_SUPPLY6		0x16c
+#define AMS_ALARM_SUPPLY7		0x180
+#define AMS_ALARM_SUPPLY8		0x184
+#define AMS_ALARM_SUPPLY9		0x188
+#define AMS_ALARM_SUPPLY10		0x18c
+#define AMS_ALARM_VCCAMS		0x190
+#define AMS_ALARM_TEMP_REMOTE		0x194
+#define AMS_ALARM_THRESHOLD_OFF_10	0x10
+#define AMS_ALARM_THRESHOLD_OFF_20	0x20
+
+#define AMS_ALARM_THR_DIRECT_MASK	BIT(1)
+#define AMS_ALARM_THR_MIN		~(BIT(16) - 1)
+#define AMS_ALARM_THR_MAX		(BIT(16) - 1)
+
+#define AMS_ALARM_MASK			GENMASK(63, 0)
+#define AMS_NO_OF_ALARMS		32
+#define AMS_PL_ALARM_START		16
+#define AMS_PL_ALARM_MASK		GENMASK(31, 16)
+#define AMS_ISR0_ALARM_MASK		GENMASK(31, 0)
+#define AMS_ISR1_ALARM_MASK		(GENMASK(31, 29) | GENMASK(4, 0))
+#define AMS_ISR1_EOC_MASK		BIT(3)
+#define AMS_ISR1_INTR_MASK		GENMASK(63, 32)
+#define AMS_ISR0_ALARM_2_TO_0_MASK	GENMASK(2, 0)
+#define AMS_ISR0_ALARM_6_TO_3_MASK	GENMASK(6, 3)
+#define AMS_ISR0_ALARM_12_TO_7_MASK	GENMASK(13, 8)
+#define AMS_CONF1_ALARM_2_TO_0_MASK	GENMASK(3, 1)
+#define AMS_CONF1_ALARM_6_TO_3_MASK	GENMASK(11, 8)
+#define AMS_CONF1_ALARM_12_TO_7_MASK	GENMASK(5, 0)
+#define AMS_REGCFG1_ALARM_MASK  \
+	(AMS_CONF1_ALARM_2_TO_0_MASK | AMS_CONF1_ALARM_6_TO_3_MASK | BIT(0))
+#define AMS_REGCFG3_ALARM_MASK		AMS_CONF1_ALARM_12_TO_7_MASK
+
+#define AMS_PS_CSTS_PS_READY		(BIT(27) | BIT(16))
+#define AMS_PL_CSTS_ACCESS_MASK		BIT(1)
+
+#define AMS_PL_MAX_FIXED_CHANNEL	10
+#define AMS_PL_MAX_EXT_CHANNEL		20
+
+#define AMS_INIT_TIMEOUT_US		10000
+#define AMS_UNMASK_TIMEOUT_MS		500
+
+/*
+ * Following scale and offset value is derived from
+ * UG580 (v1.7) December 20, 2016
+ */
+#define AMS_SUPPLY_SCALE_1VOLT		1000
+#define AMS_SUPPLY_SCALE_3VOLT		3000
+#define AMS_SUPPLY_SCALE_6VOLT		6000
+#define AMS_SUPPLY_SCALE_DIV_BIT	16
+
+#define AMS_TEMP_SCALE			509314
+#define AMS_TEMP_SCALE_DIV_BIT		16
+#define AMS_TEMP_OFFSET			-((280230LL << 16) / 509314)
+
+enum ams_alarm_bit {
+	AMS_ALARM_BIT_TEMP,
+	AMS_ALARM_BIT_SUPPLY1,
+	AMS_ALARM_BIT_SUPPLY2,
+	AMS_ALARM_BIT_SUPPLY3,
+	AMS_ALARM_BIT_SUPPLY4,
+	AMS_ALARM_BIT_SUPPLY5,
+	AMS_ALARM_BIT_SUPPLY6,
+	AMS_ALARM_BIT_RESERVED,
+	AMS_ALARM_BIT_SUPPLY7,
+	AMS_ALARM_BIT_SUPPLY8,
+	AMS_ALARM_BIT_SUPPLY9,
+	AMS_ALARM_BIT_SUPPLY10,
+	AMS_ALARM_BIT_VCCAMS,
+	AMS_ALARM_BIT_TEMP_REMOTE
+};
+
+enum ams_seq {
+	AMS_SEQ_VCC_PSPLL,
+	AMS_SEQ_VCC_PSBATT,
+	AMS_SEQ_VCCINT,
+	AMS_SEQ_VCCBRAM,
+	AMS_SEQ_VCCAUX,
+	AMS_SEQ_PSDDRPLL,
+	AMS_SEQ_INTDDR
+};
+
+enum ams_ps_pl_seq {
+	AMS_SEQ_CALIB,
+	AMS_SEQ_RSVD_1,
+	AMS_SEQ_RSVD_2,
+	AMS_SEQ_TEST,
+	AMS_SEQ_RSVD_4,
+	AMS_SEQ_SUPPLY4,
+	AMS_SEQ_SUPPLY5,
+	AMS_SEQ_SUPPLY6,
+	AMS_SEQ_TEMP,
+	AMS_SEQ_SUPPLY2,
+	AMS_SEQ_SUPPLY1,
+	AMS_SEQ_VP_VN,
+	AMS_SEQ_VREFP,
+	AMS_SEQ_VREFN,
+	AMS_SEQ_SUPPLY3,
+	AMS_SEQ_CURRENT_MON,
+	AMS_SEQ_SUPPLY7,
+	AMS_SEQ_SUPPLY8,
+	AMS_SEQ_SUPPLY9,
+	AMS_SEQ_SUPPLY10,
+	AMS_SEQ_VCCAMS,
+	AMS_SEQ_TEMP_REMOTE,
+	AMS_SEQ_MAX
+};
+
+#define AMS_SEQ(x)		(AMS_SEQ_MAX + (x))
+#define AMS_VAUX_SEQ(x)		(AMS_SEQ_MAX + (x))
+
+#define AMS_PS_SEQ_MAX		AMS_SEQ_MAX
+#define PS_SEQ(x)		(x)
+#define PL_SEQ(x)		(AMS_PS_SEQ_MAX + (x))
+#define AMS_CTRL_SEQ_BASE	(AMS_PS_SEQ_MAX * 3)
+
+#define AMS_CHAN_TEMP(_scan_index, _addr) { \
+	.type = IIO_TEMP, \
+	.indexed = 1, \
+	.address = (_addr), \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+		BIT(IIO_CHAN_INFO_SCALE) | \
+		BIT(IIO_CHAN_INFO_OFFSET), \
+	.event_spec = ams_temp_events, \
+	.scan_index = _scan_index, \
+	.num_event_specs = ARRAY_SIZE(ams_temp_events), \
+}
+
+#define AMS_CHAN_VOLTAGE(_scan_index, _addr, _alarm) { \
+	.type = IIO_VOLTAGE, \
+	.indexed = 1, \
+	.address = (_addr), \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+		BIT(IIO_CHAN_INFO_SCALE), \
+	.event_spec = (_alarm) ? ams_voltage_events : NULL, \
+	.scan_index = _scan_index, \
+	.num_event_specs = (_alarm) ? ARRAY_SIZE(ams_voltage_events) : 0, \
+}
+
+#define AMS_PS_CHAN_TEMP(_scan_index, _addr) \
+	AMS_CHAN_TEMP(PS_SEQ(_scan_index), _addr)
+#define AMS_PS_CHAN_VOLTAGE(_scan_index, _addr) \
+	AMS_CHAN_VOLTAGE(PS_SEQ(_scan_index), _addr, true)
+
+#define AMS_PL_CHAN_TEMP(_scan_index, _addr) \
+	AMS_CHAN_TEMP(PL_SEQ(_scan_index), _addr)
+#define AMS_PL_CHAN_VOLTAGE(_scan_index, _addr, _alarm) \
+	AMS_CHAN_VOLTAGE(PL_SEQ(_scan_index), _addr, _alarm)
+#define AMS_PL_AUX_CHAN_VOLTAGE(_auxno) \
+	AMS_CHAN_VOLTAGE(PL_SEQ(AMS_VAUX_SEQ(_auxno)), \
+			AMS_REG_VAUX(_auxno), false)
+#define AMS_CTRL_CHAN_VOLTAGE(_scan_index, _addr) \
+	AMS_CHAN_VOLTAGE(PL_SEQ(AMS_VAUX_SEQ(AMS_SEQ(_scan_index))), \
+			_addr, false)
+
+/**
+ * struct ams - Driver data for xilinx-ams
+ * @base: physical base address of device
+ * @ps_base: physical base address of PS device
+ * @pl_base: physical base address of PL device
+ * @clk: clocks associated with the device
+ * @dev: pointer to device struct
+ * @lock: to handle multiple user interaction
+ * @intr_lock: to protect interrupt mask values
+ * @alarm_mask: alarm configuration
+ * @masked_alarm: currently masked due to alarm
+ * @intr_mask: interrupt configuration
+ * @ams_unmask_work: re-enables event once the event condition disappears
+ *
+ * This structure contains necessary state for Sysmon driver to operate
+ */
+struct ams {
+	void __iomem *base;
+	void __iomem *ps_base;
+	void __iomem *pl_base;
+	struct clk *clk;
+	struct device *dev;
+	struct mutex lock;
+	spinlock_t intr_lock;
+	unsigned int alarm_mask;
+	unsigned int masked_alarm;
+	u64 intr_mask;
+	struct delayed_work ams_unmask_work;
+};
+
+static inline void ams_ps_update_reg(struct ams *ams, unsigned int offset,
+				     u32 mask, u32 data)
+{
+	u32 val, regval;
+
+	val = readl(ams->ps_base + offset);
+	regval = (val & ~mask) | (data & mask);
+	writel(regval, ams->ps_base + offset);
+}
+
+static inline void ams_pl_update_reg(struct ams *ams, unsigned int offset,
+				     u32 mask, u32 data)
+{
+	u32 val, regval;
+
+	val = readl(ams->pl_base + offset);
+	regval = (val & ~mask) | (data & mask);
+	writel(regval, ams->pl_base + offset);
+}
+
+static void ams_update_intrmask(struct ams *ams, u64 mask, u64 val)
+{
+	u32 regval;
+
+	ams->intr_mask = (ams->intr_mask & ~mask) | (val & mask);
+
+	regval = ~(ams->intr_mask | ams->masked_alarm);
+	writel(regval, ams->base + AMS_IER_0);
+
+	regval = ~(FIELD_GET(AMS_ISR1_INTR_MASK, ams->intr_mask));
+	writel(regval, ams->base + AMS_IER_1);
+
+	regval = ams->intr_mask | ams->masked_alarm;
+	writel(regval, ams->base + AMS_IDR_0);
+
+	regval = FIELD_GET(AMS_ISR1_INTR_MASK, ams->intr_mask);
+	writel(regval, ams->base + AMS_IDR_1);
+}
+
+static void ams_disable_all_alarms(struct ams *ams)
+{
+	/* disable PS module alarm */
+	if (ams->ps_base) {
+		ams_ps_update_reg(ams, AMS_REG_CONFIG1, AMS_REGCFG1_ALARM_MASK,
+				  AMS_REGCFG1_ALARM_MASK);
+		ams_ps_update_reg(ams, AMS_REG_CONFIG3, AMS_REGCFG3_ALARM_MASK,
+				  AMS_REGCFG3_ALARM_MASK);
+	}
+
+	/* disable PL module alarm */
+	if (ams->pl_base) {
+		ams_pl_update_reg(ams, AMS_REG_CONFIG1,
+				  AMS_REGCFG1_ALARM_MASK,
+				  AMS_REGCFG1_ALARM_MASK);
+		ams_pl_update_reg(ams, AMS_REG_CONFIG3,
+				  AMS_REGCFG3_ALARM_MASK,
+				  AMS_REGCFG3_ALARM_MASK);
+	}
+}
+
+static void ams_update_ps_alarm(struct ams *ams, unsigned long alarm_mask)
+{
+	u32 cfg;
+	u32 val;
+
+	val = FIELD_GET(AMS_ISR0_ALARM_2_TO_0_MASK, alarm_mask);
+	cfg = ~(FIELD_PREP(AMS_CONF1_ALARM_2_TO_0_MASK, val));
+
+	val = FIELD_GET(AMS_ISR0_ALARM_6_TO_3_MASK, alarm_mask);
+	cfg &= ~(FIELD_PREP(AMS_CONF1_ALARM_6_TO_3_MASK, val));
+
+	ams_ps_update_reg(ams, AMS_REG_CONFIG1, AMS_REGCFG1_ALARM_MASK, cfg);
+
+	val = FIELD_GET(AMS_ISR0_ALARM_12_TO_7_MASK, alarm_mask);
+	cfg = ~(FIELD_PREP(AMS_CONF1_ALARM_12_TO_7_MASK, val));
+	ams_ps_update_reg(ams, AMS_REG_CONFIG3, AMS_REGCFG3_ALARM_MASK, cfg);
+}
+
+static void ams_update_pl_alarm(struct ams *ams, unsigned long alarm_mask)
+{
+	unsigned long pl_alarm_mask;
+	u32 cfg;
+	u32 val;
+
+	pl_alarm_mask = FIELD_GET(AMS_PL_ALARM_MASK, alarm_mask);
+
+	val = FIELD_GET(AMS_ISR0_ALARM_2_TO_0_MASK, pl_alarm_mask);
+	cfg = ~(FIELD_PREP(AMS_CONF1_ALARM_2_TO_0_MASK, val));
+
+	val = FIELD_GET(AMS_ISR0_ALARM_6_TO_3_MASK, pl_alarm_mask);
+	cfg &= ~(FIELD_PREP(AMS_CONF1_ALARM_6_TO_3_MASK, val));
+
+	ams_pl_update_reg(ams, AMS_REG_CONFIG1, AMS_REGCFG1_ALARM_MASK, cfg);
+
+	val = FIELD_GET(AMS_ISR0_ALARM_12_TO_7_MASK, pl_alarm_mask);
+	cfg = ~(FIELD_PREP(AMS_CONF1_ALARM_12_TO_7_MASK, val));
+	ams_pl_update_reg(ams, AMS_REG_CONFIG3, AMS_REGCFG3_ALARM_MASK, cfg);
+}
+
+static void ams_update_alarm(struct ams *ams, unsigned long alarm_mask)
+{
+	unsigned long flags;
+
+	if (ams->ps_base)
+		ams_update_ps_alarm(ams, alarm_mask);
+
+	if (ams->pl_base)
+		ams_update_pl_alarm(ams, alarm_mask);
+
+	spin_lock_irqsave(&ams->intr_lock, flags);
+	ams_update_intrmask(ams, AMS_ISR0_ALARM_MASK, ~alarm_mask);
+	spin_unlock_irqrestore(&ams->intr_lock, flags);
+}
+
+static void ams_enable_channel_sequence(struct iio_dev *indio_dev)
+{
+	struct ams *ams = iio_priv(indio_dev);
+	unsigned long long scan_mask;
+	int i;
+	u32 regval;
+
+	/*
+	 * Enable channel sequence. First 22 bits of scan_mask represent
+	 * PS channels, and next remaining bits represent PL channels.
+	 */
+
+	/* Run calibration of PS & PL as part of the sequence */
+	scan_mask = BIT(0) | BIT(AMS_PS_SEQ_MAX);
+	for (i = 0; i < indio_dev->num_channels; i++)
+		scan_mask |= BIT_ULL(indio_dev->channels[i].scan_index);
+
+	if (ams->ps_base) {
+		/* put sysmon in a soft reset to change the sequence */
+		ams_ps_update_reg(ams, AMS_REG_CONFIG1, AMS_CONF1_SEQ_MASK,
+				  AMS_CONF1_SEQ_DEFAULT);
+
+		/* configure basic channels */
+		regval = FIELD_GET(AMS_REG_SEQ0_MASK, scan_mask);
+		writel(regval, ams->ps_base + AMS_REG_SEQ_CH0);
+
+		regval = FIELD_GET(AMS_REG_SEQ2_MASK, scan_mask);
+		writel(regval, ams->ps_base + AMS_REG_SEQ_CH2);
+
+		/* set continuous sequence mode */
+		ams_ps_update_reg(ams, AMS_REG_CONFIG1, AMS_CONF1_SEQ_MASK,
+				  AMS_CONF1_SEQ_CONTINUOUS);
+	}
+
+	if (ams->pl_base) {
+		/* put sysmon in a soft reset to change the sequence */
+		ams_pl_update_reg(ams, AMS_REG_CONFIG1, AMS_CONF1_SEQ_MASK,
+				  AMS_CONF1_SEQ_DEFAULT);
+
+		/* configure basic channels */
+		scan_mask = FIELD_GET(AMS_PL_SEQ_MASK, scan_mask);
+
+		regval = FIELD_GET(AMS_REG_SEQ0_MASK, scan_mask);
+		writel(regval, ams->pl_base + AMS_REG_SEQ_CH0);
+
+		regval = FIELD_GET(AMS_REG_SEQ1_MASK, scan_mask);
+		writel(regval, ams->pl_base + AMS_REG_SEQ_CH1);
+
+		regval = FIELD_GET(AMS_REG_SEQ2_MASK, scan_mask);
+		writel(regval, ams->pl_base + AMS_REG_SEQ_CH2);
+
+		/* set continuous sequence mode */
+		ams_pl_update_reg(ams, AMS_REG_CONFIG1, AMS_CONF1_SEQ_MASK,
+				  AMS_CONF1_SEQ_CONTINUOUS);
+	}
+}
+
+static int ams_init_device(struct ams *ams)
+{
+	u32 reg;
+	u32 expect = AMS_PS_CSTS_PS_READY;
+	int ret;
+
+	/* reset AMS */
+	if (ams->ps_base) {
+		writel(AMS_PS_RESET_VALUE, ams->ps_base + AMS_VP_VN);
+
+		ret = readl_poll_timeout(ams->base + AMS_PS_CSTS, reg,
+					 (reg & expect), 0,
+					 AMS_INIT_TIMEOUT_US);
+		if (ret)
+			return ret;
+
+		/* put sysmon in a default state */
+		ams_ps_update_reg(ams, AMS_REG_CONFIG1, AMS_CONF1_SEQ_MASK,
+				  AMS_CONF1_SEQ_DEFAULT);
+	}
+
+	if (ams->pl_base) {
+		reg = readl(ams->base + AMS_PL_CSTS);
+		if (reg == 0)
+			return (int) reg;
+
+		writel(AMS_PL_RESET_VALUE, ams->pl_base + AMS_VP_VN);
+
+		/* put sysmon in a default state */
+		ams_pl_update_reg(ams, AMS_REG_CONFIG1, AMS_CONF1_SEQ_MASK,
+				  AMS_CONF1_SEQ_DEFAULT);
+	}
+
+	ams_disable_all_alarms(ams);
+
+	/* Disable interrupt */
+	ams_update_intrmask(ams, AMS_ALARM_MASK, AMS_ALARM_MASK);
+
+	/* Clear any pending interrupt */
+	writel(AMS_ISR0_ALARM_MASK, ams->base + AMS_ISR_0);
+	writel(AMS_ISR1_ALARM_MASK, ams->base + AMS_ISR_1);
+
+	return 0;
+}
+
+static int ams_enable_single_channel(struct ams *ams, unsigned int offset)
+{
+	u8 channel_num;
+
+	switch (offset) {
+	case AMS_VCC_PSPLL0:
+		channel_num = AMS_VCC_PSPLL0_CH;
+		break;
+	case AMS_VCC_PSPLL3:
+		channel_num = AMS_VCC_PSPLL3_CH;
+		break;
+	case AMS_VCCINT:
+		channel_num = AMS_VCCINT_CH;
+		break;
+	case AMS_VCCBRAM:
+		channel_num = AMS_VCCBRAM_CH;
+		break;
+	case AMS_VCCAUX:
+		channel_num = AMS_VCCAUX_CH;
+		break;
+	case AMS_PSDDRPLL:
+		channel_num = AMS_PSDDRPLL_CH;
+		break;
+	case AMS_PSINTFPDDR:
+		channel_num = AMS_PSINTFPDDR_CH;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* set single channel, sequencer off mode */
+	ams_ps_update_reg(ams, AMS_REG_CONFIG1, AMS_CONF1_SEQ_MASK,
+			  AMS_CONF1_SEQ_SINGLE_CHANNEL);
+
+	/* write the channel number */
+	ams_ps_update_reg(ams, AMS_REG_CONFIG0, AMS_CONF0_CHANNEL_NUM_MASK,
+			  channel_num);
+
+	return 0;
+}
+
+static int ams_read_vcc_reg(struct ams *ams, unsigned int offset, u32 *data)
+{
+	u32 reg;
+	u32 expect = AMS_ISR1_EOC_MASK;
+	int ret;
+
+	ret = ams_enable_single_channel(ams, offset);
+	if (ret)
+		return ret;
+
+	ret = readl_poll_timeout(ams->base + AMS_ISR_1, reg,
+				 (reg & expect), 0, AMS_INIT_TIMEOUT_US);
+	if (ret)
+		return ret;
+
+	*data = readl(ams->base + offset);
+
+	return 0;
+}
+
+static int ams_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan,
+			int *val, int *val2, long mask)
+{
+	struct ams *ams = iio_priv(indio_dev);
+	int ret;
+	int regval;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&ams->lock);
+		if (chan->scan_index >= AMS_CTRL_SEQ_BASE) {
+			ret = ams_read_vcc_reg(ams, chan->address, val);
+			if (ret) {
+				mutex_unlock(&ams->lock);
+				return -EINVAL;
+			}
+			ams_enable_channel_sequence(indio_dev);
+		} else if (chan->scan_index >= AMS_PS_SEQ_MAX)
+			*val = readl(ams->pl_base + chan->address);
+		else
+			*val = readl(ams->ps_base + chan->address);
+		mutex_unlock(&ams->lock);
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_VOLTAGE:
+			if (chan->scan_index < AMS_PS_SEQ_MAX) {
+				switch (chan->address) {
+				case AMS_SUPPLY1:
+				case AMS_SUPPLY2:
+				case AMS_SUPPLY3:
+				case AMS_SUPPLY4:
+				case AMS_SUPPLY9:
+				case AMS_SUPPLY10:
+				case AMS_VCCAMS:
+					*val = AMS_SUPPLY_SCALE_3VOLT;
+					break;
+				case AMS_SUPPLY5:
+				case AMS_SUPPLY6:
+				case AMS_SUPPLY7:
+				case AMS_SUPPLY8:
+					*val = AMS_SUPPLY_SCALE_6VOLT;
+					break;
+				default:
+					*val = AMS_SUPPLY_SCALE_1VOLT;
+					break;
+				}
+			} else if (chan->scan_index >= AMS_PS_SEQ_MAX &&
+				   chan->scan_index < AMS_CTRL_SEQ_BASE) {
+				switch (chan->address) {
+				case AMS_SUPPLY1:
+				case AMS_SUPPLY2:
+				case AMS_SUPPLY3:
+				case AMS_SUPPLY4:
+				case AMS_SUPPLY5:
+				case AMS_SUPPLY6:
+				case AMS_VCCAMS:
+				case AMS_VREFP:
+				case AMS_VREFN:
+					*val = AMS_SUPPLY_SCALE_3VOLT;
+					break;
+				case AMS_SUPPLY7:
+					regval = readl(ams->pl_base + AMS_REG_CONFIG4);
+					if (FIELD_GET(AMS_VUSER0_MASK, regval))
+						*val = AMS_SUPPLY_SCALE_6VOLT;
+					else
+						*val = AMS_SUPPLY_SCALE_3VOLT;
+					break;
+				case AMS_SUPPLY8:
+					regval = readl(ams->pl_base + AMS_REG_CONFIG4);
+					if (FIELD_GET(AMS_VUSER1_MASK, regval))
+						*val = AMS_SUPPLY_SCALE_6VOLT;
+					else
+						*val = AMS_SUPPLY_SCALE_3VOLT;
+					break;
+				case AMS_SUPPLY9:
+					regval = readl(ams->pl_base + AMS_REG_CONFIG4);
+					if (FIELD_GET(AMS_VUSER2_MASK, regval))
+						*val = AMS_SUPPLY_SCALE_6VOLT;
+					else
+						*val = AMS_SUPPLY_SCALE_3VOLT;
+					break;
+				case AMS_SUPPLY10:
+					regval = readl(ams->pl_base + AMS_REG_CONFIG4);
+					if (FIELD_GET(AMS_VUSER3_MASK, regval))
+						*val = AMS_SUPPLY_SCALE_6VOLT;
+					else
+						*val = AMS_SUPPLY_SCALE_3VOLT;
+					break;
+				case AMS_VP_VN:
+				case AMS_REG_VAUX(0) ... AMS_REG_VAUX(15):
+					*val = AMS_SUPPLY_SCALE_1VOLT;
+					break;
+				default:
+					*val = AMS_SUPPLY_SCALE_1VOLT;
+					break;
+				}
+			} else {
+				switch (chan->address) {
+				case AMS_VCC_PSPLL0:
+				case AMS_VCC_PSPLL3:
+				case AMS_VCCINT:
+				case AMS_VCCBRAM:
+				case AMS_VCCAUX:
+				case AMS_PSDDRPLL:
+				case AMS_PSINTFPDDR:
+					*val = AMS_SUPPLY_SCALE_3VOLT;
+					break;
+				default:
+					*val = AMS_SUPPLY_SCALE_1VOLT;
+					break;
+				}
+			}
+			*val2 = AMS_SUPPLY_SCALE_DIV_BIT;
+			return IIO_VAL_FRACTIONAL_LOG2;
+		case IIO_TEMP:
+			*val = AMS_TEMP_SCALE;
+			*val2 = AMS_TEMP_SCALE_DIV_BIT;
+			return IIO_VAL_FRACTIONAL_LOG2;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_OFFSET:
+		/* Only the temperature channel has an offset */
+		*val = AMS_TEMP_OFFSET;
+		return IIO_VAL_INT;
+	}
+
+	return -EINVAL;
+}
+
+static int ams_get_alarm_offset(int scan_index, enum iio_event_direction dir)
+{
+	int offset;
+
+	if (scan_index >= AMS_PS_SEQ_MAX)
+		scan_index -= AMS_PS_SEQ_MAX;
+
+	if (dir == IIO_EV_DIR_FALLING) {
+		if (scan_index < AMS_SEQ_SUPPLY7)
+			offset = AMS_ALARM_THRESHOLD_OFF_10;
+		else
+			offset = AMS_ALARM_THRESHOLD_OFF_20;
+	} else {
+		offset = 0;
+	}
+
+	switch (scan_index) {
+	case AMS_SEQ_TEMP:
+		return AMS_ALARM_TEMP + offset;
+	case AMS_SEQ_SUPPLY1:
+		return AMS_ALARM_SUPPLY1 + offset;
+	case AMS_SEQ_SUPPLY2:
+		return AMS_ALARM_SUPPLY2 + offset;
+	case AMS_SEQ_SUPPLY3:
+		return AMS_ALARM_SUPPLY3 + offset;
+	case AMS_SEQ_SUPPLY4:
+		return AMS_ALARM_SUPPLY4 + offset;
+	case AMS_SEQ_SUPPLY5:
+		return AMS_ALARM_SUPPLY5 + offset;
+	case AMS_SEQ_SUPPLY6:
+		return AMS_ALARM_SUPPLY6 + offset;
+	case AMS_SEQ_SUPPLY7:
+		return AMS_ALARM_SUPPLY7 + offset;
+	case AMS_SEQ_SUPPLY8:
+		return AMS_ALARM_SUPPLY8 + offset;
+	case AMS_SEQ_SUPPLY9:
+		return AMS_ALARM_SUPPLY9 + offset;
+	case AMS_SEQ_SUPPLY10:
+		return AMS_ALARM_SUPPLY10 + offset;
+	case AMS_SEQ_VCCAMS:
+		return AMS_ALARM_VCCAMS + offset;
+	case AMS_SEQ_TEMP_REMOTE:
+		return AMS_ALARM_TEMP_REMOTE + offset;
+	default:
+		return 0;
+	}
+}
+
+static const struct iio_chan_spec *ams_event_to_channel(struct iio_dev *dev,
+							u32 event)
+{
+	int scan_index = 0, i;
+
+	if (event >= AMS_PL_ALARM_START) {
+		event -= AMS_PL_ALARM_START;
+		scan_index = AMS_PS_SEQ_MAX;
+	}
+
+	switch (event) {
+	case AMS_ALARM_BIT_TEMP:
+		scan_index += AMS_SEQ_TEMP;
+		break;
+	case AMS_ALARM_BIT_SUPPLY1:
+		scan_index += AMS_SEQ_SUPPLY1;
+		break;
+	case AMS_ALARM_BIT_SUPPLY2:
+		scan_index += AMS_SEQ_SUPPLY2;
+		break;
+	case AMS_ALARM_BIT_SUPPLY3:
+		scan_index += AMS_SEQ_SUPPLY3;
+		break;
+	case AMS_ALARM_BIT_SUPPLY4:
+		scan_index += AMS_SEQ_SUPPLY4;
+		break;
+	case AMS_ALARM_BIT_SUPPLY5:
+		scan_index += AMS_SEQ_SUPPLY5;
+		break;
+	case AMS_ALARM_BIT_SUPPLY6:
+		scan_index += AMS_SEQ_SUPPLY6;
+		break;
+	case AMS_ALARM_BIT_SUPPLY7:
+		scan_index += AMS_SEQ_SUPPLY7;
+		break;
+	case AMS_ALARM_BIT_SUPPLY8:
+		scan_index += AMS_SEQ_SUPPLY8;
+		break;
+	case AMS_ALARM_BIT_SUPPLY9:
+		scan_index += AMS_SEQ_SUPPLY9;
+		break;
+	case AMS_ALARM_BIT_SUPPLY10:
+		scan_index += AMS_SEQ_SUPPLY10;
+		break;
+	case AMS_ALARM_BIT_VCCAMS:
+		scan_index += AMS_SEQ_VCCAMS;
+		break;
+	case AMS_ALARM_BIT_TEMP_REMOTE:
+		scan_index += AMS_SEQ_TEMP_REMOTE;
+		break;
+	}
+
+	for (i = 0; i < dev->num_channels; i++)
+		if (dev->channels[i].scan_index == scan_index)
+			break;
+
+	return &dev->channels[i];
+}
+
+static int ams_get_alarm_mask(int scan_index)
+{
+	int bit = 0;
+
+	if (scan_index >= AMS_PS_SEQ_MAX) {
+		bit = AMS_PL_ALARM_START;
+		scan_index -= AMS_PS_SEQ_MAX;
+	}
+
+	switch (scan_index) {
+	case AMS_SEQ_TEMP:
+		return BIT(AMS_ALARM_BIT_TEMP + bit);
+	case AMS_SEQ_SUPPLY1:
+		return BIT(AMS_ALARM_BIT_SUPPLY1 + bit);
+	case AMS_SEQ_SUPPLY2:
+		return BIT(AMS_ALARM_BIT_SUPPLY2 + bit);
+	case AMS_SEQ_SUPPLY3:
+		return BIT(AMS_ALARM_BIT_SUPPLY3 + bit);
+	case AMS_SEQ_SUPPLY4:
+		return BIT(AMS_ALARM_BIT_SUPPLY4 + bit);
+	case AMS_SEQ_SUPPLY5:
+		return BIT(AMS_ALARM_BIT_SUPPLY5 + bit);
+	case AMS_SEQ_SUPPLY6:
+		return BIT(AMS_ALARM_BIT_SUPPLY6 + bit);
+	case AMS_SEQ_SUPPLY7:
+		return BIT(AMS_ALARM_BIT_SUPPLY7 + bit);
+	case AMS_SEQ_SUPPLY8:
+		return BIT(AMS_ALARM_BIT_SUPPLY8 + bit);
+	case AMS_SEQ_SUPPLY9:
+		return BIT(AMS_ALARM_BIT_SUPPLY9 + bit);
+	case AMS_SEQ_SUPPLY10:
+		return BIT(AMS_ALARM_BIT_SUPPLY10 + bit);
+	case AMS_SEQ_VCCAMS:
+		return BIT(AMS_ALARM_BIT_VCCAMS + bit);
+	case AMS_SEQ_TEMP_REMOTE:
+		return BIT(AMS_ALARM_BIT_TEMP_REMOTE + bit);
+	default:
+		return 0;
+	}
+}
+
+static int ams_read_event_config(struct iio_dev *indio_dev,
+				 const struct iio_chan_spec *chan,
+				 enum iio_event_type type,
+				 enum iio_event_direction dir)
+{
+	struct ams *ams = iio_priv(indio_dev);
+
+	return !!(ams->alarm_mask & ams_get_alarm_mask(chan->scan_index));
+}
+
+static int ams_write_event_config(struct iio_dev *indio_dev,
+				  const struct iio_chan_spec *chan,
+				  enum iio_event_type type,
+				  enum iio_event_direction dir,
+				  int state)
+{
+	struct ams *ams = iio_priv(indio_dev);
+	unsigned int alarm;
+
+	alarm = ams_get_alarm_mask(chan->scan_index);
+
+	mutex_lock(&ams->lock);
+
+	if (state)
+		ams->alarm_mask |= alarm;
+	else
+		ams->alarm_mask &= ~alarm;
+
+	ams_update_alarm(ams, ams->alarm_mask);
+
+	mutex_unlock(&ams->lock);
+
+	return 0;
+}
+
+static int ams_read_event_value(struct iio_dev *indio_dev,
+				const struct iio_chan_spec *chan,
+				enum iio_event_type type,
+				enum iio_event_direction dir,
+				enum iio_event_info info, int *val, int *val2)
+{
+	struct ams *ams = iio_priv(indio_dev);
+	unsigned int offset = ams_get_alarm_offset(chan->scan_index, dir);
+
+	mutex_lock(&ams->lock);
+
+	if (chan->scan_index >= AMS_PS_SEQ_MAX)
+		*val = readl(ams->pl_base + offset);
+	else
+		*val = readl(ams->ps_base + offset);
+
+	mutex_unlock(&ams->lock);
+
+	return IIO_VAL_INT;
+}
+
+static int ams_write_event_value(struct iio_dev *indio_dev,
+				 const struct iio_chan_spec *chan,
+				 enum iio_event_type type,
+				 enum iio_event_direction dir,
+				 enum iio_event_info info, int val, int val2)
+{
+	struct ams *ams = iio_priv(indio_dev);
+	unsigned int offset;
+
+	mutex_lock(&ams->lock);
+
+	/* Set temperature channel threshold to direct threshold */
+	if (chan->type == IIO_TEMP) {
+		offset = ams_get_alarm_offset(chan->scan_index,
+					      IIO_EV_DIR_FALLING);
+
+		if (chan->scan_index >= AMS_PS_SEQ_MAX)
+			ams_pl_update_reg(ams, offset,
+					  AMS_ALARM_THR_DIRECT_MASK,
+					  AMS_ALARM_THR_DIRECT_MASK);
+		else
+			ams_ps_update_reg(ams, offset,
+					  AMS_ALARM_THR_DIRECT_MASK,
+					  AMS_ALARM_THR_DIRECT_MASK);
+	}
+
+	offset = ams_get_alarm_offset(chan->scan_index, dir);
+	if (chan->scan_index >= AMS_PS_SEQ_MAX)
+		writel(val, ams->pl_base + offset);
+	else
+		writel(val, ams->ps_base + offset);
+
+	mutex_unlock(&ams->lock);
+
+	return 0;
+}
+
+static void ams_handle_event(struct iio_dev *indio_dev, u32 event)
+{
+	const struct iio_chan_spec *chan;
+
+	chan = ams_event_to_channel(indio_dev, event);
+
+	if (chan->type == IIO_TEMP) {
+		/*
+		 * The temperature channel only supports over-temperature
+		 * events.
+		 */
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(chan->type, chan->channel,
+						    IIO_EV_TYPE_THRESH,
+						    IIO_EV_DIR_RISING),
+			iio_get_time_ns(indio_dev));
+	} else {
+		/*
+		 * For other channels we don't know whether it is a upper or
+		 * lower threshold event. Userspace will have to check the
+		 * channel value if it wants to know.
+		 */
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(chan->type, chan->channel,
+						    IIO_EV_TYPE_THRESH,
+						    IIO_EV_DIR_EITHER),
+			iio_get_time_ns(indio_dev));
+	}
+}
+
+static void ams_handle_events(struct iio_dev *indio_dev, unsigned long events)
+{
+	unsigned int bit;
+
+	for_each_set_bit(bit, &events, AMS_NO_OF_ALARMS)
+		ams_handle_event(indio_dev, bit);
+}
+
+/**
+ * ams_unmask_worker - ams alarm interrupt unmask worker
+ * @work :		work to be done
+ *
+ * The ZynqMP threshold interrupts are level sensitive. Since we can't make the
+ * threshold condition go way from within the interrupt handler, this means as
+ * soon as a threshold condition is present we would enter the interrupt handler
+ * again and again. To work around this we mask all active threshold interrupts
+ * in the interrupt handler and start a timer. In this timer we poll the
+ * interrupt status and only if the interrupt is inactive we unmask it again.
+ */
+static void ams_unmask_worker(struct work_struct *work)
+{
+	struct ams *ams = container_of(work, struct ams, ams_unmask_work.work);
+	unsigned int status, unmask;
+
+	spin_lock_irq(&ams->intr_lock);
+
+	status = readl(ams->base + AMS_ISR_0);
+
+	/* Clear those bits which are not active anymore */
+	unmask = (ams->masked_alarm ^ status) & ams->masked_alarm;
+
+	/* Clear status of disabled alarm */
+	unmask |= ams->intr_mask;
+
+	ams->masked_alarm &= status;
+
+	/* Also clear those which are masked out anyway */
+	ams->masked_alarm &= ~ams->intr_mask;
+
+	/* Clear the interrupts before we unmask them */
+	writel(unmask, ams->base + AMS_ISR_0);
+
+	ams_update_intrmask(ams, ~AMS_ALARM_MASK, ~AMS_ALARM_MASK);
+
+	spin_unlock_irq(&ams->intr_lock);
+
+	/* If still pending some alarm re-trigger the timer */
+	if (ams->masked_alarm)
+		schedule_delayed_work(&ams->ams_unmask_work, msecs_to_jiffies(AMS_UNMASK_TIMEOUT_MS));
+}
+
+static irqreturn_t ams_irq(int irq, void *data)
+{
+	struct iio_dev *indio_dev = data;
+	struct ams *ams = iio_priv(indio_dev);
+	u32 isr0;
+
+	spin_lock(&ams->intr_lock);
+
+	isr0 = readl(ams->base + AMS_ISR_0);
+
+	/* Only process alarms that are not masked */
+	isr0 &= ~((ams->intr_mask & AMS_ISR0_ALARM_MASK) | ams->masked_alarm);
+
+	if (!isr0) {
+		spin_unlock(&ams->intr_lock);
+		return IRQ_NONE;
+	}
+
+	/* Clear interrupt */
+	writel(isr0, ams->base + AMS_ISR_0);
+
+	/* Mask the alarm interrupts until cleared */
+	ams->masked_alarm |= isr0;
+	ams_update_intrmask(ams, ~AMS_ALARM_MASK, ~AMS_ALARM_MASK);
+
+	ams_handle_events(indio_dev, isr0);
+
+	schedule_delayed_work(&ams->ams_unmask_work,
+			      msecs_to_jiffies(AMS_UNMASK_TIMEOUT_MS));
+
+	spin_unlock(&ams->intr_lock);
+
+	return IRQ_HANDLED;
+}
+
+static const struct iio_event_spec ams_temp_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE) |
+				BIT(IIO_EV_INFO_VALUE),
+	},
+};
+
+static const struct iio_event_spec ams_voltage_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+	},
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+	},
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static const struct iio_chan_spec ams_ps_channels[] = {
+	AMS_PS_CHAN_TEMP(AMS_SEQ_TEMP, AMS_TEMP),
+	AMS_PS_CHAN_TEMP(AMS_SEQ_TEMP_REMOTE, AMS_TEMP_REMOTE),
+	AMS_PS_CHAN_VOLTAGE(AMS_SEQ_SUPPLY1, AMS_SUPPLY1),
+	AMS_PS_CHAN_VOLTAGE(AMS_SEQ_SUPPLY2, AMS_SUPPLY2),
+	AMS_PS_CHAN_VOLTAGE(AMS_SEQ_SUPPLY3, AMS_SUPPLY3),
+	AMS_PS_CHAN_VOLTAGE(AMS_SEQ_SUPPLY4, AMS_SUPPLY4),
+	AMS_PS_CHAN_VOLTAGE(AMS_SEQ_SUPPLY5, AMS_SUPPLY5),
+	AMS_PS_CHAN_VOLTAGE(AMS_SEQ_SUPPLY6, AMS_SUPPLY6),
+	AMS_PS_CHAN_VOLTAGE(AMS_SEQ_SUPPLY7, AMS_SUPPLY7),
+	AMS_PS_CHAN_VOLTAGE(AMS_SEQ_SUPPLY8, AMS_SUPPLY8),
+	AMS_PS_CHAN_VOLTAGE(AMS_SEQ_SUPPLY9, AMS_SUPPLY9),
+	AMS_PS_CHAN_VOLTAGE(AMS_SEQ_SUPPLY10, AMS_SUPPLY10),
+	AMS_PS_CHAN_VOLTAGE(AMS_SEQ_VCCAMS, AMS_VCCAMS),
+};
+
+static const struct iio_chan_spec ams_pl_channels[] = {
+	AMS_PL_CHAN_TEMP(AMS_SEQ_TEMP, AMS_TEMP),
+	AMS_PL_CHAN_VOLTAGE(AMS_SEQ_SUPPLY1, AMS_SUPPLY1, true),
+	AMS_PL_CHAN_VOLTAGE(AMS_SEQ_SUPPLY2, AMS_SUPPLY2, true),
+	AMS_PL_CHAN_VOLTAGE(AMS_SEQ_VREFP, AMS_VREFP, false),
+	AMS_PL_CHAN_VOLTAGE(AMS_SEQ_VREFN, AMS_VREFN, false),
+	AMS_PL_CHAN_VOLTAGE(AMS_SEQ_SUPPLY3, AMS_SUPPLY3, true),
+	AMS_PL_CHAN_VOLTAGE(AMS_SEQ_SUPPLY4, AMS_SUPPLY4, true),
+	AMS_PL_CHAN_VOLTAGE(AMS_SEQ_SUPPLY5, AMS_SUPPLY5, true),
+	AMS_PL_CHAN_VOLTAGE(AMS_SEQ_SUPPLY6, AMS_SUPPLY6, true),
+	AMS_PL_CHAN_VOLTAGE(AMS_SEQ_VCCAMS, AMS_VCCAMS, true),
+	AMS_PL_CHAN_VOLTAGE(AMS_SEQ_VP_VN, AMS_VP_VN, false),
+	AMS_PL_CHAN_VOLTAGE(AMS_SEQ_SUPPLY7, AMS_SUPPLY7, true),
+	AMS_PL_CHAN_VOLTAGE(AMS_SEQ_SUPPLY8, AMS_SUPPLY8, true),
+	AMS_PL_CHAN_VOLTAGE(AMS_SEQ_SUPPLY9, AMS_SUPPLY9, true),
+	AMS_PL_CHAN_VOLTAGE(AMS_SEQ_SUPPLY10, AMS_SUPPLY10, true),
+	AMS_PL_AUX_CHAN_VOLTAGE(0),
+	AMS_PL_AUX_CHAN_VOLTAGE(1),
+	AMS_PL_AUX_CHAN_VOLTAGE(2),
+	AMS_PL_AUX_CHAN_VOLTAGE(3),
+	AMS_PL_AUX_CHAN_VOLTAGE(4),
+	AMS_PL_AUX_CHAN_VOLTAGE(5),
+	AMS_PL_AUX_CHAN_VOLTAGE(6),
+	AMS_PL_AUX_CHAN_VOLTAGE(7),
+	AMS_PL_AUX_CHAN_VOLTAGE(8),
+	AMS_PL_AUX_CHAN_VOLTAGE(9),
+	AMS_PL_AUX_CHAN_VOLTAGE(10),
+	AMS_PL_AUX_CHAN_VOLTAGE(11),
+	AMS_PL_AUX_CHAN_VOLTAGE(12),
+	AMS_PL_AUX_CHAN_VOLTAGE(13),
+	AMS_PL_AUX_CHAN_VOLTAGE(14),
+	AMS_PL_AUX_CHAN_VOLTAGE(15),
+};
+
+static const struct iio_chan_spec ams_ctrl_channels[] = {
+	AMS_CTRL_CHAN_VOLTAGE(AMS_SEQ_VCC_PSPLL, AMS_VCC_PSPLL0),
+	AMS_CTRL_CHAN_VOLTAGE(AMS_SEQ_VCC_PSBATT, AMS_VCC_PSPLL3),
+	AMS_CTRL_CHAN_VOLTAGE(AMS_SEQ_VCCINT, AMS_VCCINT),
+	AMS_CTRL_CHAN_VOLTAGE(AMS_SEQ_VCCBRAM, AMS_VCCBRAM),
+	AMS_CTRL_CHAN_VOLTAGE(AMS_SEQ_VCCAUX, AMS_VCCAUX),
+	AMS_CTRL_CHAN_VOLTAGE(AMS_SEQ_PSDDRPLL, AMS_PSDDRPLL),
+	AMS_CTRL_CHAN_VOLTAGE(AMS_SEQ_INTDDR, AMS_PSINTFPDDR),
+};
+
+static int ams_get_ext_chan(struct fwnode_handle *chan_node,
+			    struct iio_chan_spec *channels, int num_channels)
+{
+	struct fwnode_handle *child;
+	unsigned int reg;
+	int ret;
+
+	fwnode_for_each_child_node(chan_node, child) {
+		ret = fwnode_property_read_u32(child, "reg", &reg);
+		if (ret || reg > (AMS_PL_MAX_EXT_CHANNEL + 30))
+			continue;
+
+		memcpy(&channels[num_channels], &ams_pl_channels[reg +
+		       AMS_PL_MAX_FIXED_CHANNEL - 30], sizeof(*channels));
+
+		if (fwnode_property_read_bool(child, "xlnx,bipolar"))
+			channels[num_channels].scan_type.sign =	's';
+
+		num_channels++;
+	}
+
+	return num_channels;
+}
+
+static void ams_iounmap(void *data)
+{
+	iounmap(data);
+}
+
+static int ams_init_module(struct iio_dev *indio_dev,
+			   struct fwnode_handle *fwnode,
+			   struct iio_chan_spec *channels)
+{
+	struct ams *ams = iio_priv(indio_dev);
+	struct device *dev = indio_dev->dev.parent;
+	int num_channels = 0;
+	int ret;
+
+	if (fwnode_property_match_string(fwnode, "compatible",
+					 "xlnx,zynqmp-ams-ps") == 0) {
+		ams->ps_base = fwnode_iomap(fwnode, 0);
+		if (!ams->ps_base)
+			return -ENXIO;
+		ret = devm_add_action_or_reset(dev, ams_iounmap, ams->ps_base);
+		if (ret < 0)
+			return ret;
+
+		/* add PS channels to iio device channels */
+		memcpy(channels + num_channels, ams_ps_channels,
+		       sizeof(ams_ps_channels));
+		num_channels += ARRAY_SIZE(ams_ps_channels);
+	} else if (fwnode_property_match_string(fwnode, "compatible",
+						"xlnx,zynqmp-ams-pl") == 0) {
+		ams->pl_base = fwnode_iomap(fwnode, 0);
+		if (!ams->pl_base)
+			return -ENXIO;
+
+		ret = devm_add_action_or_reset(dev, ams_iounmap, ams->pl_base);
+		if (ret < 0)
+			return ret;
+
+		/* Copy only first 10 fix channels */
+		memcpy(channels + num_channels, ams_pl_channels,
+		       AMS_PL_MAX_FIXED_CHANNEL * sizeof(*channels));
+		num_channels += AMS_PL_MAX_FIXED_CHANNEL;
+
+		num_channels = ams_get_ext_chan(fwnode, channels,
+						num_channels);
+	} else if (fwnode_property_match_string(fwnode, "compatible",
+						"xlnx,zynqmp-ams") == 0) {
+		/* add AMS channels to iio device channels */
+		memcpy(channels + num_channels, ams_ctrl_channels,
+		       sizeof(ams_ctrl_channels));
+		num_channels += ARRAY_SIZE(ams_ctrl_channels);
+	} else {
+		return -EINVAL;
+	}
+
+	return num_channels;
+}
+
+static int ams_parse_firmware(struct iio_dev *indio_dev,
+			      struct platform_device *pdev)
+{
+	struct ams *ams = iio_priv(indio_dev);
+	struct iio_chan_spec *ams_channels, *dev_channels;
+	struct fwnode_handle *child = NULL, *fwnode = dev_fwnode(&pdev->dev);
+	size_t dev_chan_size, ams_chan_size, num_chan;
+	int ret, ch_cnt = 0, i, rising_off, falling_off;
+	unsigned int num_channels = 0;
+
+
+	num_chan = ARRAY_SIZE(ams_ps_channels) + ARRAY_SIZE(ams_pl_channels) +
+		ARRAY_SIZE(ams_ctrl_channels);
+
+	ams_chan_size = array_size(num_chan, sizeof(struct iio_chan_spec));
+	if (ams_chan_size == SIZE_MAX)
+		return -EINVAL;
+
+	/* Initialize buffer for channel specification */
+	ams_channels = kcalloc(num_chan, sizeof(struct iio_chan_spec), GFP_KERNEL);
+	if (!ams_channels)
+		return -ENOMEM;
+
+	if (fwnode_device_is_available(fwnode)) {
+		ret = ams_init_module(indio_dev, fwnode, ams_channels);
+		if (ret < 0)
+			goto free_mem;
+
+		num_channels += ret;
+	}
+
+	fwnode_for_each_child_node(fwnode, child) {
+		if (fwnode_device_is_available(child)) {
+			ret = ams_init_module(indio_dev, child,
+					      ams_channels + num_channels);
+			if (ret < 0) {
+				fwnode_handle_put(child);
+				goto free_mem;
+			}
+
+			num_channels += ret;
+		}
+	}
+
+	for (i = 0; i < num_channels; i++) {
+		ams_channels[i].channel = ch_cnt++;
+
+		if (ams_channels[i].scan_index < AMS_CTRL_SEQ_BASE) {
+			/* set threshold to max and min for each channel */
+			falling_off =
+				ams_get_alarm_offset(ams_channels[i].scan_index,
+						     IIO_EV_DIR_FALLING);
+			rising_off =
+				ams_get_alarm_offset(ams_channels[i].scan_index,
+						     IIO_EV_DIR_RISING);
+			if (ams_channels[i].scan_index >= AMS_PS_SEQ_MAX) {
+				writel(AMS_ALARM_THR_MIN,
+				       ams->pl_base + falling_off);
+				writel(AMS_ALARM_THR_MAX,
+				       ams->pl_base + rising_off);
+			} else {
+				writel(AMS_ALARM_THR_MIN,
+				       ams->ps_base + falling_off);
+				writel(AMS_ALARM_THR_MAX,
+				       ams->ps_base + rising_off);
+			}
+		}
+	}
+
+	dev_chan_size = array_size((size_t)num_channels, sizeof(struct iio_chan_spec));
+	if (dev_chan_size == SIZE_MAX)
+		return -EINVAL;
+
+	dev_channels = devm_kcalloc(&pdev->dev, (size_t)num_channels,
+				    sizeof(struct iio_chan_spec), GFP_KERNEL);
+	if (!dev_channels) {
+		ret = -ENOMEM;
+		goto free_mem;
+	}
+
+	memcpy(dev_channels, ams_channels,
+	       sizeof(*ams_channels) * num_channels);
+	indio_dev->channels = dev_channels;
+	indio_dev->num_channels = num_channels;
+
+	ret = 0;
+
+free_mem:
+	kfree(ams_channels);
+
+	return ret;
+}
+
+static const struct iio_info iio_ams_info = {
+	.read_raw = &ams_read_raw,
+	.read_event_config = &ams_read_event_config,
+	.write_event_config = &ams_write_event_config,
+	.read_event_value = &ams_read_event_value,
+	.write_event_value = &ams_write_event_value,
+};
+
+static const struct of_device_id ams_of_match_table[] = {
+	{ .compatible = "xlnx,zynqmp-ams" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ams_of_match_table);
+
+static void ams_clk_disable_unprepare(void *data)
+{
+	clk_disable_unprepare(data);
+}
+
+static void ams_cancel_delayed_work(void *data)
+{
+	cancel_delayed_work(data);
+}
+
+static int ams_probe(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev;
+	struct ams *ams;
+	int ret;
+	int irq;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*ams));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	ams = iio_priv(indio_dev);
+	mutex_init(&ams->lock);
+	spin_lock_init(&ams->intr_lock);
+
+	indio_dev->name = "xilinx-ams";
+
+	indio_dev->info = &iio_ams_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ams->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ams->base))
+		return PTR_ERR(ams->base);
+
+	ams->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(ams->clk))
+		return PTR_ERR(ams->clk);
+
+	ret = clk_prepare_enable(ams->clk);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_add_action_or_reset(&pdev->dev, ams_clk_disable_unprepare, ams->clk);
+	if (ret < 0)
+		return ret;
+
+	INIT_DELAYED_WORK(&ams->ams_unmask_work, ams_unmask_worker);
+	ret = devm_add_action_or_reset(&pdev->dev, ams_cancel_delayed_work,
+				       &ams->ams_unmask_work);
+	if (ret < 0)
+		return ret;
+
+	ret = ams_parse_firmware(indio_dev, pdev);
+	if (ret) {
+		dev_err_probe(&pdev->dev, ret, "failure in parsing DT\n");
+		return ret;
+	}
+
+	ret = ams_init_device(ams);
+	if (ret) {
+		dev_err_probe(&pdev->dev, ret, "failed to initialize AMS\n");
+		return ret;
+	}
+
+	ams_enable_channel_sequence(indio_dev);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return ret;
+
+	ret = devm_request_irq(&pdev->dev, irq, &ams_irq, 0, "ams-irq",
+			       indio_dev);
+	if (ret < 0) {
+		dev_err_probe(&pdev->dev, ret, "failed to register interrupt\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	return devm_iio_device_register(&pdev->dev, indio_dev);
+}
+
+static int __maybe_unused ams_suspend(struct device *dev)
+{
+	struct ams *ams = iio_priv(dev_get_drvdata(dev));
+
+	clk_disable_unprepare(ams->clk);
+
+	return 0;
+}
+
+static int __maybe_unused ams_resume(struct device *dev)
+{
+	struct ams *ams = iio_priv(dev_get_drvdata(dev));
+
+	return clk_prepare_enable(ams->clk);
+}
+
+static SIMPLE_DEV_PM_OPS(ams_pm_ops, ams_suspend, ams_resume);
+
+static struct platform_driver ams_driver = {
+	.probe = ams_probe,
+	.driver = {
+		.name = "xilinx-ams",
+		.pm = &ams_pm_ops,
+		.of_match_table = ams_of_match_table,
+	},
+};
+module_platform_driver(ams_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Xilinx, Inc.");
-- 
2.17.1

[PATCH v10 4/5] dt-bindings: iio: adc: Add Xilinx AMS binding documentation

[Anand Ashok Dumbre]

Xilinx AMS have several ADC channels that can be used for measurement of
different voltages and temperatures. Document the same in the bindings.

Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/iio/adc/xlnx,zynqmp-ams.yaml     | 227 ++++++++++++++++++
 1 file changed, 227 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml

diff --git a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
new file mode 100644
index 000000000000..87992db389b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
@@ -0,0 +1,227 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/xlnx,zynqmp-ams.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq Ultrascale AMS controller
+
+maintainers:
+  - Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
+
+description: |
+  The AMS (Analog Monitoring System) includes an ADC as well as on-chip sensors
+  that can be used to sample external voltages and monitor on-die operating
+  conditions, such as temperature and supply voltage levels.
+  The AMS has two SYSMON blocks which are PL (Programmable Logic) SYSMON and
+  PS (Processing System) SYSMON.
+  All designs should have AMS registers, but PS and PL are optional. The
+  AMS controller can work with only PS, only PL and both PS and PL
+  configurations. Please specify registers according to your design. Devicetree
+  should always have AMS module property. Providing PS & PL module is optional.
+
+  AMS Channel Details
+  ```````````````````
+  Sysmon Block  |Channel|                       Details                                 |Measurement
+                |Number |                                                               |Type
+  ---------------------------------------------------------------------------------------------------------
+  AMS CTRL      |0      |System PLLs voltage measurement, VCC_PSPLL.                    |Voltage
+                |1      |Battery voltage measurement, VCC_PSBATT.                       |Voltage
+                |2      |PL Internal voltage measurement, VCCINT.                       |Voltage
+                |3      |Block RAM voltage measurement, VCCBRAM.                        |Voltage
+                |4      |PL Aux voltage measurement, VCCAUX.                            |Voltage
+                |5      |Voltage measurement for six DDR I/O PLLs, VCC_PSDDR_PLL.       |Voltage
+                |6      |VCC_PSINTFP_DDR voltage measurement.                           |Voltage
+  ---------------------------------------------------------------------------------------------------------
+  PS Sysmon     |7      |LPD temperature measurement.                                   |Temperature
+                |8      |FPD temperature measurement (REMOTE).                          |Temperature
+                |9      |VCC PS LPD voltage measurement (supply1).                      |Voltage
+                |10     |VCC PS FPD voltage measurement (supply2).                      |Voltage
+                |11     |PS Aux voltage reference (supply3).                            |Voltage
+                |12     |DDR I/O VCC voltage measurement.                               |Voltage
+                |13     |PS IO Bank 503 voltage measurement (supply5).                  |Voltage
+                |14     |PS IO Bank 500 voltage measurement (supply6).                  |Voltage
+                |15     |VCCO_PSIO1 voltage measurement.                                |Voltage
+                |16     |VCCO_PSIO2 voltage measurement.                                |Voltage
+                |17     |VCC_PS_GTR voltage measurement (VPS_MGTRAVCC).                 |Voltage
+                |18     |VTT_PS_GTR voltage measurement (VPS_MGTRAVTT).                 |Voltage
+                |19     |VCC_PSADC voltage measurement.                                 |Voltage
+  ---------------------------------------------------------------------------------------------------------
+  PL Sysmon     |20     |PL temperature measurement.                                    |Temperature
+                |21     |PL Internal voltage measurement, VCCINT.                       |Voltage
+                |22     |PL Auxiliary voltage measurement, VCCAUX.                      |Voltage
+                |23     |ADC Reference P+ voltage measurement.                          |Voltage
+                |24     |ADC Reference N- voltage measurement.                          |Voltage
+                |25     |PL Block RAM voltage measurement, VCCBRAM.                     |Voltage
+                |26     |LPD Internal voltage measurement, VCC_PSINTLP (supply4).       |Voltage
+                |27     |FPD Internal voltage measurement, VCC_PSINTFP (supply5).       |Voltage
+                |28     |PS Auxiliary voltage measurement (supply6).                    |Voltage
+                |29     |PL VCCADC voltage measurement (vccams).                        |Voltage
+                |30     |Differential analog input signal voltage measurment.           |Voltage
+                |31     |VUser0 voltage measurement (supply7).                          |Voltage
+                |32     |VUser1 voltage measurement (supply8).                          |Voltage
+                |33     |VUser2 voltage measurement (supply9).                          |Voltage
+                |34     |VUser3 voltage measurement (supply10).                         |Voltage
+                |35     |Auxiliary ch 0 voltage measurement (VAux0).                    |Voltage
+                |36     |Auxiliary ch 1 voltage measurement (VAux1).                    |Voltage
+                |37     |Auxiliary ch 2 voltage measurement (VAux2).                    |Voltage
+                |38     |Auxiliary ch 3 voltage measurement (VAux3).                    |Voltage
+                |39     |Auxiliary ch 4 voltage measurement (VAux4).                    |Voltage
+                |40     |Auxiliary ch 5 voltage measurement (VAux5).                    |Voltage
+                |41     |Auxiliary ch 6 voltage measurement (VAux6).                    |Voltage
+                |42     |Auxiliary ch 7 voltage measurement (VAux7).                    |Voltage
+                |43     |Auxiliary ch 8 voltage measurement (VAux8).                    |Voltage
+                |44     |Auxiliary ch 9 voltage measurement (VAux9).                    |Voltage
+                |45     |Auxiliary ch 10 voltage measurement (VAux10).                  |Voltage
+                |46     |Auxiliary ch 11 voltage measurement (VAux11).                  |Voltage
+                |47     |Auxiliary ch 12 voltage measurement (VAux12).                  |Voltage
+                |48     |Auxiliary ch 13 voltage measurement (VAux13).                  |Voltage
+                |49     |Auxiliary ch 14 voltage measurement (VAux14).                  |Voltage
+                |50     |Auxiliary ch 15 voltage measurement (VAux15).                  |Voltage
+  --------------------------------------------------------------------------------------------------------
+
+properties:
+  compatible:
+    enum:
+      - xlnx,zynqmp-ams
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    description: AMS Controller register space
+    maxItems: 1
+
+  ranges:
+    description:
+      Maps the child address space for PS and/or PL.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#io-channel-cells':
+    const: 1
+
+  ams-ps@0:
+    type: object
+    description: |
+      PS (Processing System) SYSMON is memory mapped to PS. This block has
+      built-in alarm generation logic that is used to interrupt the processor
+      based on condition set.
+
+    properties:
+      compatible:
+        enum:
+          - xlnx,zynqmp-ams-ps
+
+      reg:
+        description: Register Space for PS-SYSMON
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+    additionalProperties: false
+
+  ams-pl@400:
+    type: object
+    description:
+      PL-SYSMON is capable of monitoring off chip voltage and temperature.
+      PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring
+      from external master. Out of this interface currently only DRP is
+      supported. This block has alarm generation logic that is used to
+      interrupt the processor based on condition set.
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - xlnx,zynqmp-ams-pl
+
+      reg:
+        description: Register Space for PL-SYSMON.
+        maxItems: 1
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^channel@([2-4][0-9]|50)$":
+        type: object
+        description:
+          Describes the external channels connected.
+
+        properties:
+          reg:
+            description:
+              Pair of pins the channel is connected to. This value is
+              same as Channel Number for a particular channel.
+            minimum: 20
+            maximum: 50
+
+          xlnx,bipolar:
+            $ref: /schemas/types.yaml#/definitions/flag
+            type: boolean
+            description:
+              If the set channel is used in bipolar mode.
+
+        required:
+          - reg
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        xilinx_ams: ams@ffa50000 {
+            compatible = "xlnx,zynqmp-ams";
+            interrupt-parent = <&gic>;
+            interrupts = <0 56 4>;
+            reg = <0x0 0xffa50000 0x0 0x800>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            #io-channel-cells = <1>;
+            ranges = <0 0 0xffa50800 0x800>;
+
+            ams_ps: ams-ps@0 {
+                compatible = "xlnx,zynqmp-ams-ps";
+                reg = <0 0x400>;
+            };
+
+            ams_pl: ams-pl@400 {
+                compatible = "xlnx,zynqmp-ams-pl";
+                reg = <0x400 0x400>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                channel@30 {
+                    reg = <30>;
+                    xlnx,bipolar;
+                };
+                channel@31 {
+                    reg = <31>;
+                };
+                channel@38 {
+                    reg = <38>;
+                    xlnx,bipolar;
+                };
+            };
+        };
+    };
-- 
2.17.1

[PATCH v10 5/5] MAINTAINERS: Add maintainer for xilinx-ams

[Anand Ashok Dumbre]

Add maintaner entry for xilinx-ams driver.

Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
---
 MAINTAINERS | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 7a2345ce8521..1ddb55cbe987 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20867,6 +20867,13 @@ M:	Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
 S:	Maintained
 F:	drivers/net/ethernet/xilinx/xilinx_axienet*
 
+XILINX AMS DRIVER
+M:	Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
+F:	drivers/iio/adc/xilinx-ams.c
+
 XILINX CAN DRIVER
 M:	Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
 R:	Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
-- 
2.17.1

Re: [PATCH v10 0/5] Add Xilinx AMS Driver

[Andy Shevchenko]

On Wed, Nov 17, 2021 at 6:46 PM Anand Ashok Dumbre
<anand.ashok.dumbre@xilinx.com> wrote:
>
> Add Xilinx AMS driver which is used for Xilinx's ZynqMP AMS controller.
> This AMS driver is used to report various interface voltages and temperatures
> across the system.
> This driver will be used by iio-hwmon to repport voltages and temperatures
> across the system by using various channel interfaces.
> This driver handles AMS module including PS-Sysmon & PL-Sysmon. The binding
> documentation is added for understanding of AMS, PS, PL Sysmon Channels.

Thanks and wait a bit, please. No need to send patches so often. We
haven't settled down yet on v9. Here you effectively ignored my
comment given again patch 5/5. Why?

...

> Changes in v10:
>         - Fixed licence in zynqmp.dtsi.
>         - Changed the macros to use BIT().
>         - Realign some code to fit within 100 chars.
>         - Modified readl_poll_timeout usage.

>         - Usage of array_size() instead of check_mul_overflow().

Why? I have asked you why you haven't used kcalloc there as well.

>         - Usage of dev_err_probe() instead of dev_err().
>         - Usage of kcalloc instead of kzalloc()

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v10 3/5] iio: adc: Add Xilinx AMS driver

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 3736 bytes --]

Hi Anand,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on jic23-iio/togreg]
[also build test WARNING on linux/master linus/master v5.16-rc1 next-20211117]
[cannot apply to xilinx-xlnx/master]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Anand-Ashok-Dumbre/Add-Xilinx-AMS-Driver/20211118-001150
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg
config: sparc64-randconfig-s032-20211118 (attached as .config)
compiler: sparc64-linux-gcc (GCC) 11.2.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # apt-get install sparse
        # sparse version: v0.6.4-dirty
        # https://github.com/0day-ci/linux/commit/196a4a5b4232a4a12d0843a0002b664720b5d200
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Anand-Ashok-Dumbre/Add-Xilinx-AMS-Driver/20211118-001150
        git checkout 196a4a5b4232a4a12d0843a0002b664720b5d200
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' ARCH=sparc64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   drivers/iio/adc/xilinx-ams.c: In function 'ams_update_intrmask':
   drivers/iio/adc/xilinx-ams.c:323:20: error: implicit declaration of function 'FIELD_GET' [-Werror=implicit-function-declaration]
     323 |         regval = ~(FIELD_GET(AMS_ISR1_INTR_MASK, ams->intr_mask));
         |                    ^~~~~~~~~
   drivers/iio/adc/xilinx-ams.c: In function 'ams_update_ps_alarm':
   drivers/iio/adc/xilinx-ams.c:360:17: error: implicit declaration of function 'FIELD_PREP' [-Werror=implicit-function-declaration]
     360 |         cfg = ~(FIELD_PREP(AMS_CONF1_ALARM_2_TO_0_MASK, val));
         |                 ^~~~~~~~~~
   drivers/iio/adc/xilinx-ams.c: In function 'ams_parse_firmware':
>> drivers/iio/adc/xilinx-ams.c:121:41: warning: conversion from 'long unsigned int' to 'u32' {aka 'unsigned int'} changes value from '18446744073709486080' to '4294901760' [-Woverflow]
     121 | #define AMS_ALARM_THR_MIN               ~(BIT(16) - 1)
         |                                         ^~~~~~~~~~~~~~
   drivers/iio/adc/xilinx-ams.c:1285:40: note: in expansion of macro 'AMS_ALARM_THR_MIN'
    1285 |                                 writel(AMS_ALARM_THR_MIN,
         |                                        ^~~~~~~~~~~~~~~~~
>> drivers/iio/adc/xilinx-ams.c:121:41: warning: conversion from 'long unsigned int' to 'u32' {aka 'unsigned int'} changes value from '18446744073709486080' to '4294901760' [-Woverflow]
     121 | #define AMS_ALARM_THR_MIN               ~(BIT(16) - 1)
         |                                         ^~~~~~~~~~~~~~
   drivers/iio/adc/xilinx-ams.c:1290:40: note: in expansion of macro 'AMS_ALARM_THR_MIN'
    1290 |                                 writel(AMS_ALARM_THR_MIN,
         |                                        ^~~~~~~~~~~~~~~~~
   cc1: some warnings being treated as errors


vim +121 drivers/iio/adc/xilinx-ams.c

   119	
   120	#define AMS_ALARM_THR_DIRECT_MASK	BIT(1)
 > 121	#define AMS_ALARM_THR_MIN		~(BIT(16) - 1)
   122	#define AMS_ALARM_THR_MAX		(BIT(16) - 1)
   123	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 43402 bytes --]

Re: [PATCH v10 3/5] iio: adc: Add Xilinx AMS driver

[Andy Shevchenko]

On Wed, Nov 17, 2021 at 04:10:26PM +0000, Anand Ashok Dumbre wrote:
> The AMS includes an ADC as well as on-chip sensors that can be used to
> sample external voltages and monitor on-die operating conditions, such
> as temperature and supply voltage levels. The AMS has two SYSMON blocks.
> PL-SYSMON block is capable of monitoring off chip voltage and
> temperature.
> 
> PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring
> from an external master. Out of these interfaces currently only DRP is
> supported. Other block PS-SYSMON is memory mapped to PS.
> 
> The AMS can use internal channels to monitor voltage and temperature as
> well as one primary and up to 16 auxiliary channels for measuring
> external voltages.
> 
> The voltage and temperature monitoring channels also have event capability
> which allows to generate an interrupt when their value falls below or
> raises above a set threshold.

Thanks for an update, my comments below.

...

Missed bitfields.h as kbuild bot noticed.

> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/overflow.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +#include <linux/slab.h>

...

> +#define AMS_ALARM_THR_DIRECT_MASK	BIT(1)

> +#define AMS_ALARM_THR_MIN		~(BIT(16) - 1)

This is wrong. I already said it.

> +#define AMS_ALARM_THR_MAX		(BIT(16) - 1)

...

> +enum ams_alarm_bit {
> +	AMS_ALARM_BIT_TEMP,
> +	AMS_ALARM_BIT_SUPPLY1,
> +	AMS_ALARM_BIT_SUPPLY2,
> +	AMS_ALARM_BIT_SUPPLY3,
> +	AMS_ALARM_BIT_SUPPLY4,
> +	AMS_ALARM_BIT_SUPPLY5,
> +	AMS_ALARM_BIT_SUPPLY6,
> +	AMS_ALARM_BIT_RESERVED,
> +	AMS_ALARM_BIT_SUPPLY7,
> +	AMS_ALARM_BIT_SUPPLY8,
> +	AMS_ALARM_BIT_SUPPLY9,
> +	AMS_ALARM_BIT_SUPPLY10,
> +	AMS_ALARM_BIT_VCCAMS,
> +	AMS_ALARM_BIT_TEMP_REMOTE

+Comma, same to the rest where the last item is not a terminator one.

> +};
> +
> +enum ams_seq {
> +	AMS_SEQ_VCC_PSPLL,
> +	AMS_SEQ_VCC_PSBATT,
> +	AMS_SEQ_VCCINT,
> +	AMS_SEQ_VCCBRAM,
> +	AMS_SEQ_VCCAUX,
> +	AMS_SEQ_PSDDRPLL,
> +	AMS_SEQ_INTDDR

...like here.

> +};

> +enum ams_ps_pl_seq {
> +	AMS_SEQ_CALIB,
> +	AMS_SEQ_RSVD_1,
> +	AMS_SEQ_RSVD_2,
> +	AMS_SEQ_TEST,
> +	AMS_SEQ_RSVD_4,
> +	AMS_SEQ_SUPPLY4,
> +	AMS_SEQ_SUPPLY5,
> +	AMS_SEQ_SUPPLY6,
> +	AMS_SEQ_TEMP,
> +	AMS_SEQ_SUPPLY2,
> +	AMS_SEQ_SUPPLY1,
> +	AMS_SEQ_VP_VN,
> +	AMS_SEQ_VREFP,
> +	AMS_SEQ_VREFN,
> +	AMS_SEQ_SUPPLY3,
> +	AMS_SEQ_CURRENT_MON,
> +	AMS_SEQ_SUPPLY7,
> +	AMS_SEQ_SUPPLY8,
> +	AMS_SEQ_SUPPLY9,
> +	AMS_SEQ_SUPPLY10,
> +	AMS_SEQ_VCCAMS,
> +	AMS_SEQ_TEMP_REMOTE,
> +	AMS_SEQ_MAX

...but not here!

> +};

...

> +#define AMS_SEQ(x)		(AMS_SEQ_MAX + (x))
> +#define AMS_VAUX_SEQ(x)		(AMS_SEQ_MAX + (x))

What's the difference?

> +#define AMS_PS_SEQ_MAX		AMS_SEQ_MAX

Perhaps this should be above (for the sake of easier reading).

> +#define PS_SEQ(x)		(x)
> +#define PL_SEQ(x)		(AMS_PS_SEQ_MAX + (x))
> +#define AMS_CTRL_SEQ_BASE	(AMS_PS_SEQ_MAX * 3)

...

> +		ret = readl_poll_timeout(ams->base + AMS_PS_CSTS, reg,
> +					 (reg & expect), 0,

Parentheses are not needed.
WHy 0? Is it okay to load CPU like this?

> +					 AMS_INIT_TIMEOUT_US);
> +		if (ret)
> +			return ret;

...

> +	if (ams->pl_base) {
> +		reg = readl(ams->base + AMS_PL_CSTS);
> +		if (reg == 0)

> +			return (int) reg;

I already said that this is wrong.

> +		writel(AMS_PL_RESET_VALUE, ams->pl_base + AMS_VP_VN);
> +
> +		/* put sysmon in a default state */
> +		ams_pl_update_reg(ams, AMS_REG_CONFIG1, AMS_CONF1_SEQ_MASK,
> +				  AMS_CONF1_SEQ_DEFAULT);
> +	}

...

> +	ret = readl_poll_timeout(ams->base + AMS_ISR_1, reg,
> +				 (reg & expect), 0, AMS_INIT_TIMEOUT_US);
> +	if (ret)
> +		return ret;

Same two comments as per above readl_poll_timeout() usage.

...

> +			ret = ams_read_vcc_reg(ams, chan->address, val);
> +			if (ret) {
> +				mutex_unlock(&ams->lock);
> +				return -EINVAL;

Shadowed error code.

> +			}

...

> +	case IIO_CHAN_INFO_OFFSET:
> +		/* Only the temperature channel has an offset */
> +		*val = AMS_TEMP_OFFSET;
> +		return IIO_VAL_INT;
> +	}

> +	return -EINVAL;

Why not keep it in the default case?

…

> +	switch (event) {
> +	case AMS_ALARM_BIT_TEMP:
> +		scan_index += AMS_SEQ_TEMP;
> +		break;
> +	case AMS_ALARM_BIT_SUPPLY1:
> +		scan_index += AMS_SEQ_SUPPLY1;
> +		break;
> +	case AMS_ALARM_BIT_SUPPLY2:
> +		scan_index += AMS_SEQ_SUPPLY2;
> +		break;
> +	case AMS_ALARM_BIT_SUPPLY3:
> +		scan_index += AMS_SEQ_SUPPLY3;
> +		break;
> +	case AMS_ALARM_BIT_SUPPLY4:
> +		scan_index += AMS_SEQ_SUPPLY4;
> +		break;
> +	case AMS_ALARM_BIT_SUPPLY5:
> +		scan_index += AMS_SEQ_SUPPLY5;
> +		break;
> +	case AMS_ALARM_BIT_SUPPLY6:
> +		scan_index += AMS_SEQ_SUPPLY6;
> +		break;
> +	case AMS_ALARM_BIT_SUPPLY7:
> +		scan_index += AMS_SEQ_SUPPLY7;
> +		break;
> +	case AMS_ALARM_BIT_SUPPLY8:
> +		scan_index += AMS_SEQ_SUPPLY8;
> +		break;
> +	case AMS_ALARM_BIT_SUPPLY9:
> +		scan_index += AMS_SEQ_SUPPLY9;
> +		break;
> +	case AMS_ALARM_BIT_SUPPLY10:
> +		scan_index += AMS_SEQ_SUPPLY10;
> +		break;
> +	case AMS_ALARM_BIT_VCCAMS:
> +		scan_index += AMS_SEQ_VCCAMS;
> +		break;
> +	case AMS_ALARM_BIT_TEMP_REMOTE:
> +		scan_index += AMS_SEQ_TEMP_REMOTE;
> +		break;

default: ?

> +	}

...

> +	if (chan->type == IIO_TEMP) {
> +		offset = ams_get_alarm_offset(chan->scan_index,
> +					      IIO_EV_DIR_FALLING);

One line?

> +	}

...

> +	const struct iio_chan_spec *chan;
> +
> +	chan = ams_event_to_channel(indio_dev, event);

Can be done in one line.


> +	/* Only process alarms that are not masked */
> +	isr0 &= ~((ams->intr_mask & AMS_ISR0_ALARM_MASK) | ams->masked_alarm);

> +

Redundant blank line.

> +	if (!isr0) {
> +		spin_unlock(&ams->intr_lock);
> +		return IRQ_NONE;
> +	}

...

> +		.mask_separate = BIT(IIO_EV_INFO_ENABLE) |
> +				BIT(IIO_EV_INFO_VALUE),

One line?

...

> +	fwnode_for_each_child_node(chan_node, child) {
> +		ret = fwnode_property_read_u32(child, "reg", &reg);

> +		if (ret || reg > (AMS_PL_MAX_EXT_CHANNEL + 30))

Too many parentheses.

> +			continue;

> +		memcpy(&channels[num_channels], &ams_pl_channels[reg +
> +		       AMS_PL_MAX_FIXED_CHANNEL - 30], sizeof(*channels));
> +
> +		if (fwnode_property_read_bool(child, "xlnx,bipolar"))
> +			channels[num_channels].scan_type.sign =	's';

Use temporary variable for &channels[num_channels] in both cases.

> +		num_channels++;
> +	}

...

> +		memcpy(channels + num_channels, ams_ps_channels,
> +		       sizeof(ams_ps_channels));

Ditto.

...

> +		memcpy(channels + num_channels, ams_pl_channels,
> +		       AMS_PL_MAX_FIXED_CHANNEL * sizeof(*channels));

Ditto.

...

> +		memcpy(channels + num_channels, ams_ctrl_channels,
> +		       sizeof(ams_ctrl_channels));

Ditto.

...

> +static int ams_parse_firmware(struct iio_dev *indio_dev,
> +			      struct platform_device *pdev)

Why do you need second parameter? Doesn't indio_dev already have it?

> +{
> +	struct ams *ams = iio_priv(indio_dev);
> +	struct iio_chan_spec *ams_channels, *dev_channels;
> +	struct fwnode_handle *child = NULL, *fwnode = dev_fwnode(&pdev->dev);
> +	size_t dev_chan_size, ams_chan_size, num_chan;
> +	int ret, ch_cnt = 0, i, rising_off, falling_off;
> +	unsigned int num_channels = 0;
> +
> +

One blank line is enough.

> +	num_chan = ARRAY_SIZE(ams_ps_channels) + ARRAY_SIZE(ams_pl_channels) +
> +		ARRAY_SIZE(ams_ctrl_channels);

> +	ams_chan_size = array_size(num_chan, sizeof(struct iio_chan_spec));
> +	if (ams_chan_size == SIZE_MAX)
> +		return -EINVAL;

Why is this needed now since you are using kcalloc()?

> +	/* Initialize buffer for channel specification */
> +	ams_channels = kcalloc(num_chan, sizeof(struct iio_chan_spec), GFP_KERNEL);

sizeof(*ams_channels)

> +	if (!ams_channels)
> +		return -ENOMEM;

...

> +			ret = ams_init_module(indio_dev, child,
> +					      ams_channels + num_channels);

One line?

...

> +				writel(AMS_ALARM_THR_MIN,
> +				       ams->pl_base + falling_off);
> +				writel(AMS_ALARM_THR_MAX,
> +				       ams->pl_base + rising_off);

Ditto.

...

> +				writel(AMS_ALARM_THR_MIN,
> +				       ams->ps_base + falling_off);
> +				writel(AMS_ALARM_THR_MAX,
> +				       ams->ps_base + rising_off);

Ditto.

> +	dev_chan_size = array_size((size_t)num_channels, sizeof(struct iio_chan_spec));
> +	if (dev_chan_size == SIZE_MAX)
> +		return -EINVAL;

Why is it needed now?

> +	dev_channels = devm_kcalloc(&pdev->dev, (size_t)num_channels,

Why casting?

> +				    sizeof(struct iio_chan_spec), GFP_KERNEL);

sizeof(*dev_channels)

> +	if (!dev_channels) {
> +		ret = -ENOMEM;
> +		goto free_mem;
> +	}

> +	memcpy(dev_channels, ams_channels,
> +	       sizeof(*ams_channels) * num_channels);

Hmm... according to the code the num_channels can be less than or equal to
num_chan. Hence, what you should use is the devm_krealloc_array().

static inline void *devm_krealloc_aray(...)
{
	...see how krealloc_array() is defined...
}

No need to copy memory again.

...

> +	ret = 0;
> +
> +free_mem:
> +	kfree(ams_channels);
> +
> +	return ret;

This will go away after switching to devm_kmalloc_array() +
devm_krealloc_array().

...

> +	ret = ams_parse_firmware(indio_dev, pdev);
> +	if (ret) {
> +		dev_err_probe(&pdev->dev, ret, "failure in parsing DT\n");
> +		return ret;

	return dev_err_probe(...);

Ditto for the rest similar cases.

> +	}

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v10 3/5] iio: adc: Add Xilinx AMS driver

[Michal Simek]

On 11/17/21 21:03, Andy Shevchenko wrote:
> On Wed, Nov 17, 2021 at 04:10:26PM +0000, Anand Ashok Dumbre wrote:
>> The AMS includes an ADC as well as on-chip sensors that can be used to
>> sample external voltages and monitor on-die operating conditions, such
>> as temperature and supply voltage levels. The AMS has two SYSMON blocks.
>> PL-SYSMON block is capable of monitoring off chip voltage and
>> temperature.
>>
>> PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring
>> from an external master. Out of these interfaces currently only DRP is
>> supported. Other block PS-SYSMON is memory mapped to PS.
>>
>> The AMS can use internal channels to monitor voltage and temperature as
>> well as one primary and up to 16 auxiliary channels for measuring
>> external voltages.
>>
>> The voltage and temperature monitoring channels also have event capability
>> which allows to generate an interrupt when their value falls below or
>> raises above a set threshold.
> 
> Thanks for an update, my comments below.
> 
> ...
> 
> Missed bitfields.h as kbuild bot noticed.
> 
>> +#include <linux/bits.h>
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/io.h>
>> +#include <linux/iopoll.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/mod_devicetable.h>
>> +#include <linux/overflow.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/property.h>
>> +#include <linux/slab.h>
> 
> ...
> 
>> +#define AMS_ALARM_THR_DIRECT_MASK	BIT(1)
> 
>> +#define AMS_ALARM_THR_MIN		~(BIT(16) - 1)
> 
> This is wrong. I already said it.
> 
>> +#define AMS_ALARM_THR_MAX		(BIT(16) - 1)
> 
> ...
> 
>> +enum ams_alarm_bit {
>> +	AMS_ALARM_BIT_TEMP,
>> +	AMS_ALARM_BIT_SUPPLY1,
>> +	AMS_ALARM_BIT_SUPPLY2,
>> +	AMS_ALARM_BIT_SUPPLY3,
>> +	AMS_ALARM_BIT_SUPPLY4,
>> +	AMS_ALARM_BIT_SUPPLY5,
>> +	AMS_ALARM_BIT_SUPPLY6,
>> +	AMS_ALARM_BIT_RESERVED,
>> +	AMS_ALARM_BIT_SUPPLY7,
>> +	AMS_ALARM_BIT_SUPPLY8,
>> +	AMS_ALARM_BIT_SUPPLY9,
>> +	AMS_ALARM_BIT_SUPPLY10,
>> +	AMS_ALARM_BIT_VCCAMS,
>> +	AMS_ALARM_BIT_TEMP_REMOTE
> 
> +Comma, same to the rest where the last item is not a terminator one.

And where you are touching this it will be good if you can initiate all 
values. That's recommendation we got from Greg some time ago.

Thanks,
Michal

RE: [PATCH v10 3/5] iio: adc: Add Xilinx AMS driver

[Anand Ashok Dumbre]

Hi Andy,

Thanks for your review.

Apologies for sending patch too soon.
I missed your reply to my previous patches.

> -----Original Message-----
> From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Sent: Wednesday 17 November 2021 8:03 PM
> To: Anand Ashok Dumbre <ANANDASH@xilinx.com>
> Cc: linux-kernel@vger.kernel.org; jic23@kernel.org; lars@metafoo.de; linux-
> iio@vger.kernel.org; git <git@xilinx.com>; Michal Simek
> <michals@xilinx.com>; gregkh@linuxfoundation.org; rafael@kernel.org;
> linux-acpi@vger.kernel.org; heikki.krogerus@linux.intel.com; Manish Narani
> <MNARANI@xilinx.com>
> Subject: Re: [PATCH v10 3/5] iio: adc: Add Xilinx AMS driver
> 
> On Wed, Nov 17, 2021 at 04:10:26PM +0000, Anand Ashok Dumbre wrote:
> > The AMS includes an ADC as well as on-chip sensors that can be used to
> > sample external voltages and monitor on-die operating conditions, such
> > as temperature and supply voltage levels. The AMS has two SYSMON
> blocks.
> > PL-SYSMON block is capable of monitoring off chip voltage and
> > temperature.
> >
> > PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring
> > from an external master. Out of these interfaces currently only DRP is
> > supported. Other block PS-SYSMON is memory mapped to PS.
> >
> > The AMS can use internal channels to monitor voltage and temperature
> > as well as one primary and up to 16 auxiliary channels for measuring
> > external voltages.
> >
> > The voltage and temperature monitoring channels also have event
> > capability which allows to generate an interrupt when their value
> > falls below or raises above a set threshold.
> 
> Thanks for an update, my comments below.
> 
> ...
> 
> Missed bitfields.h as kbuild bot noticed.
> 
> > +#include <linux/bits.h>
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/io.h>
> > +#include <linux/iopoll.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/mod_devicetable.h>
> > +#include <linux/overflow.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/property.h>
> > +#include <linux/slab.h>
> 
> ...
> 
> > +#define AMS_ALARM_THR_DIRECT_MASK	BIT(1)
> 
> > +#define AMS_ALARM_THR_MIN		~(BIT(16) - 1)
> 
> This is wrong. I already said it.

Yes, understood.

> 
> > +#define AMS_ALARM_THR_MAX		(BIT(16) - 1)
> 
> ...
> 
> > +enum ams_alarm_bit {
> > +	AMS_ALARM_BIT_TEMP,
> > +	AMS_ALARM_BIT_SUPPLY1,
> > +	AMS_ALARM_BIT_SUPPLY2,
> > +	AMS_ALARM_BIT_SUPPLY3,
> > +	AMS_ALARM_BIT_SUPPLY4,
> > +	AMS_ALARM_BIT_SUPPLY5,
> > +	AMS_ALARM_BIT_SUPPLY6,
> > +	AMS_ALARM_BIT_RESERVED,
> > +	AMS_ALARM_BIT_SUPPLY7,
> > +	AMS_ALARM_BIT_SUPPLY8,
> > +	AMS_ALARM_BIT_SUPPLY9,
> > +	AMS_ALARM_BIT_SUPPLY10,
> > +	AMS_ALARM_BIT_VCCAMS,
> > +	AMS_ALARM_BIT_TEMP_REMOTE
> 
> +Comma, same to the rest where the last item is not a terminator one.

Will add.

> 
> > +};
> > +
> > +enum ams_seq {
> > +	AMS_SEQ_VCC_PSPLL,
> > +	AMS_SEQ_VCC_PSBATT,
> > +	AMS_SEQ_VCCINT,
> > +	AMS_SEQ_VCCBRAM,
> > +	AMS_SEQ_VCCAUX,
> > +	AMS_SEQ_PSDDRPLL,
> > +	AMS_SEQ_INTDDR
> 
> ...like here.

Will add.

> 
> > +};
> 
> > +enum ams_ps_pl_seq {
> > +	AMS_SEQ_CALIB,
> > +	AMS_SEQ_RSVD_1,
> > +	AMS_SEQ_RSVD_2,
> > +	AMS_SEQ_TEST,
> > +	AMS_SEQ_RSVD_4,
> > +	AMS_SEQ_SUPPLY4,
> > +	AMS_SEQ_SUPPLY5,
> > +	AMS_SEQ_SUPPLY6,
> > +	AMS_SEQ_TEMP,
> > +	AMS_SEQ_SUPPLY2,
> > +	AMS_SEQ_SUPPLY1,
> > +	AMS_SEQ_VP_VN,
> > +	AMS_SEQ_VREFP,
> > +	AMS_SEQ_VREFN,
> > +	AMS_SEQ_SUPPLY3,
> > +	AMS_SEQ_CURRENT_MON,
> > +	AMS_SEQ_SUPPLY7,
> > +	AMS_SEQ_SUPPLY8,
> > +	AMS_SEQ_SUPPLY9,
> > +	AMS_SEQ_SUPPLY10,
> > +	AMS_SEQ_VCCAMS,
> > +	AMS_SEQ_TEMP_REMOTE,
> > +	AMS_SEQ_MAX
> 
> ...but not here!
> 
> > +};
> 
> ...
> 
> > +#define AMS_SEQ(x)		(AMS_SEQ_MAX + (x))
> > +#define AMS_VAUX_SEQ(x)		(AMS_SEQ_MAX + (x))
> 
> What's the difference?

I will remove the AMS_VAUX_SEQ. They are the same thing.
I am not sure what the intent from the original author was.

> 
> > +#define AMS_PS_SEQ_MAX		AMS_SEQ_MAX
> 
> Perhaps this should be above (for the sake of easier reading).

Agreed. 

> 
> > +#define PS_SEQ(x)		(x)
> > +#define PL_SEQ(x)		(AMS_PS_SEQ_MAX + (x))
> > +#define AMS_CTRL_SEQ_BASE	(AMS_PS_SEQ_MAX * 3)
> 
> ...
> 
> > +		ret = readl_poll_timeout(ams->base + AMS_PS_CSTS, reg,
> > +					 (reg & expect), 0,
> 
> Parentheses are not needed.
> WHy 0? Is it okay to load CPU like this?

No its not. 

> 
> > +					 AMS_INIT_TIMEOUT_US);
> > +		if (ret)
> > +			return ret;
> 
> ...
> 
> > +	if (ams->pl_base) {
> > +		reg = readl(ams->base + AMS_PL_CSTS);
> > +		if (reg == 0)
> 
> > +			return (int) reg;
> 
> I already said that this is wrong.
> 
> > +		writel(AMS_PL_RESET_VALUE, ams->pl_base +
> AMS_VP_VN);
> > +
> > +		/* put sysmon in a default state */
> > +		ams_pl_update_reg(ams, AMS_REG_CONFIG1,
> AMS_CONF1_SEQ_MASK,
> > +				  AMS_CONF1_SEQ_DEFAULT);
> > +	}
> 
> ...
> 
> > +	ret = readl_poll_timeout(ams->base + AMS_ISR_1, reg,
> > +				 (reg & expect), 0, AMS_INIT_TIMEOUT_US);
> > +	if (ret)
> > +		return ret;
> 
> Same two comments as per above readl_poll_timeout() usage.
> 
> ...
> 
> > +			ret = ams_read_vcc_reg(ams, chan->address, val);
> > +			if (ret) {
> > +				mutex_unlock(&ams->lock);
> > +				return -EINVAL;
> 
> Shadowed error code.

I don’t understand.

> 
> > +			}
> 
> ...
> 
> > +	case IIO_CHAN_INFO_OFFSET:
> > +		/* Only the temperature channel has an offset */
> > +		*val = AMS_TEMP_OFFSET;
> > +		return IIO_VAL_INT;
> > +	}
> 
> > +	return -EINVAL;
> 
> Why not keep it in the default case?

Oops missed one there.

> 
> …
> 
> > +	switch (event) {
> > +	case AMS_ALARM_BIT_TEMP:
> > +		scan_index += AMS_SEQ_TEMP;
> > +		break;
> > +	case AMS_ALARM_BIT_SUPPLY1:
> > +		scan_index += AMS_SEQ_SUPPLY1;
> > +		break;
> > +	case AMS_ALARM_BIT_SUPPLY2:
> > +		scan_index += AMS_SEQ_SUPPLY2;
> > +		break;
> > +	case AMS_ALARM_BIT_SUPPLY3:
> > +		scan_index += AMS_SEQ_SUPPLY3;
> > +		break;
> > +	case AMS_ALARM_BIT_SUPPLY4:
> > +		scan_index += AMS_SEQ_SUPPLY4;
> > +		break;
> > +	case AMS_ALARM_BIT_SUPPLY5:
> > +		scan_index += AMS_SEQ_SUPPLY5;
> > +		break;
> > +	case AMS_ALARM_BIT_SUPPLY6:
> > +		scan_index += AMS_SEQ_SUPPLY6;
> > +		break;
> > +	case AMS_ALARM_BIT_SUPPLY7:
> > +		scan_index += AMS_SEQ_SUPPLY7;
> > +		break;
> > +	case AMS_ALARM_BIT_SUPPLY8:
> > +		scan_index += AMS_SEQ_SUPPLY8;
> > +		break;
> > +	case AMS_ALARM_BIT_SUPPLY9:
> > +		scan_index += AMS_SEQ_SUPPLY9;
> > +		break;
> > +	case AMS_ALARM_BIT_SUPPLY10:
> > +		scan_index += AMS_SEQ_SUPPLY10;
> > +		break;
> > +	case AMS_ALARM_BIT_VCCAMS:
> > +		scan_index += AMS_SEQ_VCCAMS;
> > +		break;
> > +	case AMS_ALARM_BIT_TEMP_REMOTE:
> > +		scan_index += AMS_SEQ_TEMP_REMOTE;
> > +		break;
> 
> default: ?

This is limited by hw bits.
For default I will use the default scan_index value.
Is that ok?

> 
> > +	}
> 
> ...
> 
> > +	if (chan->type == IIO_TEMP) {
> > +		offset = ams_get_alarm_offset(chan->scan_index,
> > +					      IIO_EV_DIR_FALLING);
> 
> One line?

Agreed. 
> 
> > +	}
> 
> ...
> 
> > +	const struct iio_chan_spec *chan;
> > +
> > +	chan = ams_event_to_channel(indio_dev, event);
> 
> Can be done in one line.
> 
> 
> > +	/* Only process alarms that are not masked */
> > +	isr0 &= ~((ams->intr_mask & AMS_ISR0_ALARM_MASK) |
> > +ams->masked_alarm);
> 
> > +
> 
> Redundant blank line.

Agreed.

> 
> > +	if (!isr0) {
> > +		spin_unlock(&ams->intr_lock);
> > +		return IRQ_NONE;
> > +	}
> 
> ...
> 
> > +		.mask_separate = BIT(IIO_EV_INFO_ENABLE) |
> > +				BIT(IIO_EV_INFO_VALUE),
> 
> One line?

Agreed. 
> 
> ...
> 
> > +	fwnode_for_each_child_node(chan_node, child) {
> > +		ret = fwnode_property_read_u32(child, "reg", &reg);
> 
> > +		if (ret || reg > (AMS_PL_MAX_EXT_CHANNEL + 30))
> 
> Too many parentheses.

Is it a good practice to not have parantheses around (AMS_PL_MAX_EXT_CHANNEL + 30) ?

> 
> > +			continue;
> 
> > +		memcpy(&channels[num_channels], &ams_pl_channels[reg
> +
> > +		       AMS_PL_MAX_FIXED_CHANNEL - 30], sizeof(*channels));
> > +
> > +		if (fwnode_property_read_bool(child, "xlnx,bipolar"))
> > +			channels[num_channels].scan_type.sign =	's';
> 
> Use temporary variable for &channels[num_channels] in both cases.

Makes sense.

> 
> > +		num_channels++;
> > +	}
> 
> ...
> 
> > +		memcpy(channels + num_channels, ams_ps_channels,
> > +		       sizeof(ams_ps_channels));
> 
> Ditto.
> 
> ...
> 
> > +		memcpy(channels + num_channels, ams_pl_channels,
> > +		       AMS_PL_MAX_FIXED_CHANNEL * sizeof(*channels));
> 
> Ditto.
> 
> ...
> 
> > +		memcpy(channels + num_channels, ams_ctrl_channels,
> > +		       sizeof(ams_ctrl_channels));
> 
> Ditto.
> 

Will do for all cases.

> ...
> 
> > +static int ams_parse_firmware(struct iio_dev *indio_dev,
> > +			      struct platform_device *pdev)
> 
> Why do you need second parameter? Doesn't indio_dev already have it?

Will do.

> 
> > +{
> > +	struct ams *ams = iio_priv(indio_dev);
> > +	struct iio_chan_spec *ams_channels, *dev_channels;
> > +	struct fwnode_handle *child = NULL, *fwnode =
> dev_fwnode(&pdev->dev);
> > +	size_t dev_chan_size, ams_chan_size, num_chan;
> > +	int ret, ch_cnt = 0, i, rising_off, falling_off;
> > +	unsigned int num_channels = 0;
> > +
> > +
> 
> One blank line is enough.

Will remove it.

> 
> > +	num_chan = ARRAY_SIZE(ams_ps_channels) +
> ARRAY_SIZE(ams_pl_channels) +
> > +		ARRAY_SIZE(ams_ctrl_channels);
> 
> > +	ams_chan_size = array_size(num_chan, sizeof(struct
> iio_chan_spec));
> > +	if (ams_chan_size == SIZE_MAX)
> > +		return -EINVAL;
> 
> Why is this needed now since you are using kcalloc()?
> 
> > +	/* Initialize buffer for channel specification */
> > +	ams_channels = kcalloc(num_chan, sizeof(struct iio_chan_spec),
> > +GFP_KERNEL);
> 
> sizeof(*ams_channels)
> 
> > +	if (!ams_channels)
> > +		return -ENOMEM;
> 
> ...
> 
> > +			ret = ams_init_module(indio_dev, child,
> > +					      ams_channels + num_channels);
> 
> One line?
> 
> ...
> 
> > +				writel(AMS_ALARM_THR_MIN,
> > +				       ams->pl_base + falling_off);
> > +				writel(AMS_ALARM_THR_MAX,
> > +				       ams->pl_base + rising_off);
> 
> Ditto.
> 
> ...
> 
> > +				writel(AMS_ALARM_THR_MIN,
> > +				       ams->ps_base + falling_off);
> > +				writel(AMS_ALARM_THR_MAX,
> > +				       ams->ps_base + rising_off);
> 
> Ditto.
> 
> > +	dev_chan_size = array_size((size_t)num_channels, sizeof(struct
> iio_chan_spec));
> > +	if (dev_chan_size == SIZE_MAX)
> > +		return -EINVAL;
> 
> Why is it needed now?
> 
> > +	dev_channels = devm_kcalloc(&pdev->dev, (size_t)num_channels,
> 
> Why casting?
> 
> > +				    sizeof(struct iio_chan_spec), GFP_KERNEL);
> 
> sizeof(*dev_channels)
> 
> > +	if (!dev_channels) {
> > +		ret = -ENOMEM;
> > +		goto free_mem;
> > +	}
> 
> > +	memcpy(dev_channels, ams_channels,
> > +	       sizeof(*ams_channels) * num_channels);
> 
> Hmm... according to the code the num_channels can be less than or equal to
> num_chan. Hence, what you should use is the devm_krealloc_array().
> 
> static inline void *devm_krealloc_aray(...) {
> 	...see how krealloc_array() is defined...
> }
> 
> No need to copy memory again.

Will take a look.

> 
> ...
> 
> > +	ret = 0;
> > +
> > +free_mem:
> > +	kfree(ams_channels);
> > +
> > +	return ret;
> 
> This will go away after switching to devm_kmalloc_array() +
> devm_krealloc_array().
> 
> ...
> 
> > +	ret = ams_parse_firmware(indio_dev, pdev);
> > +	if (ret) {
> > +		dev_err_probe(&pdev->dev, ret, "failure in parsing DT\n");
> > +		return ret;
> 
> 	return dev_err_probe(...);
> 
> Ditto for the rest similar cases.

Sure.
> 
> > +	}
> 
> --
> With Best Regards,
> Andy Shevchenko
> 

Thanks,
Anand

RE: [PATCH v10 0/5] Add Xilinx AMS Driver

[Anand Ashok Dumbre]

Hi Andy,

Thanks for the review.

> -----Original Message-----
> From: Andy Shevchenko <andy.shevchenko@gmail.com>
> Sent: Wednesday 17 November 2021 5:14 PM
> To: Anand Ashok Dumbre <ANANDASH@xilinx.com>
> Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>; Jonathan
> Cameron <jic23@kernel.org>; Lars-Peter Clausen <lars@metafoo.de>; linux-
> iio <linux-iio@vger.kernel.org>; git <git@xilinx.com>; Michal Simek
> <michals@xilinx.com>; Greg Kroah-Hartman <gregkh@linuxfoundation.org>;
> Rafael J. Wysocki <rafael@kernel.org>; ACPI Devel Maling List <linux-
> acpi@vger.kernel.org>; Andy Shevchenko
> <andriy.shevchenko@linux.intel.com>; Krogerus, Heikki
> <heikki.krogerus@linux.intel.com>
> Subject: Re: [PATCH v10 0/5] Add Xilinx AMS Driver
> 
> On Wed, Nov 17, 2021 at 6:46 PM Anand Ashok Dumbre
> <anand.ashok.dumbre@xilinx.com> wrote:
> >
> > Add Xilinx AMS driver which is used for Xilinx's ZynqMP AMS controller.
> > This AMS driver is used to report various interface voltages and
> > temperatures across the system.
> > This driver will be used by iio-hwmon to repport voltages and
> > temperatures across the system by using various channel interfaces.
> > This driver handles AMS module including PS-Sysmon & PL-Sysmon. The
> > binding documentation is added for understanding of AMS, PS, PL Sysmon
> Channels.
> 
> Thanks and wait a bit, please. No need to send patches so often. We haven't
> settled down yet on v9. Here you effectively ignored my comment given
> again patch 5/5. Why?
> 

Apologies for sending patch too soon. I sent the patch before I saw your response.

> ...
> 
> > Changes in v10:
> >         - Fixed licence in zynqmp.dtsi.
> >         - Changed the macros to use BIT().
> >         - Realign some code to fit within 100 chars.
> >         - Modified readl_poll_timeout usage.
> 
> >         - Usage of array_size() instead of check_mul_overflow().
> 
> Why? I have asked you why you haven't used kcalloc there as well.

Yes, I saw the implementation of kcalloc after reading your comment and
It does check_mul_overflow internally so this is not needed.

I will wait a couple of days before sending new patches.

> 
> >         - Usage of dev_err_probe() instead of dev_err().
> >         - Usage of kcalloc instead of kzalloc()
> 
> --
> With Best Regards,
> Andy Shevchenko

Thanks,
Anand

Re: [PATCH v10 3/5] iio: adc: Add Xilinx AMS driver

[Andy Shevchenko]

On Thu, Nov 18, 2021 at 02:14:41PM +0000, Anand Ashok Dumbre wrote:
> > From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > Sent: Wednesday 17 November 2021 8:03 PM
> > On Wed, Nov 17, 2021 at 04:10:26PM +0000, Anand Ashok Dumbre wrote:

...

> > > +			ret = ams_read_vcc_reg(ams, chan->address, val);
> > > +			if (ret) {
> > > +				mutex_unlock(&ams->lock);
> > > +				return -EINVAL;
> > 
> > Shadowed error code.
> 
> I don’t understand.

You get an error code in ret variable, but you always return -EINVAL, why?

> > > +			}

...

> > default: ?
> 
> This is limited by hw bits.
> For default I will use the default scan_index value.
> Is that ok?

I think so, you know hardware better, you decide what to put there.

...

> > > +		if (ret || reg > (AMS_PL_MAX_EXT_CHANNEL + 30))
> > 
> > Too many parentheses.
> 
> Is it a good practice to not have parantheses around (AMS_PL_MAX_EXT_CHANNEL + 30) ?

It's minor thing, up to you.

> > > +			continue;

...

> > > +	dev_chan_size = array_size((size_t)num_channels, sizeof(struct
> > iio_chan_spec));
> > > +	if (dev_chan_size == SIZE_MAX)
> > > +		return -EINVAL;
> > 
> > Why is it needed now?
> > 
> > > +	dev_channels = devm_kcalloc(&pdev->dev, (size_t)num_channels,
> > 
> > Why casting?
> > 
> > > +				    sizeof(struct iio_chan_spec), GFP_KERNEL);
> > 
> > sizeof(*dev_channels)
> > 
> > > +	if (!dev_channels) {
> > > +		ret = -ENOMEM;
> > > +		goto free_mem;
> > > +	}
> > 
> > > +	memcpy(dev_channels, ams_channels,
> > > +	       sizeof(*ams_channels) * num_channels);
> > 
> > Hmm... according to the code the num_channels can be less than or equal to
> > num_chan. Hence, what you should use is the devm_krealloc_array().
> > 
> > static inline void *devm_krealloc_aray(...) {
> > 	...see how krealloc_array() is defined...
> > }
> > 
> > No need to copy memory again.
> 
> Will take a look.

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v10 3/5] iio: adc: Add Xilinx AMS driver

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 14550 bytes --]

Hi Anand,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on jic23-iio/togreg]
[also build test ERROR on linux/master linus/master v5.16-rc1 next-20211118]
[cannot apply to xilinx-xlnx/master]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Anand-Ashok-Dumbre/Add-Xilinx-AMS-Driver/20211118-001150
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git togreg
config: arc-randconfig-r035-20211118 (attached as .config)
compiler: arceb-elf-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/196a4a5b4232a4a12d0843a0002b664720b5d200
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Anand-Ashok-Dumbre/Add-Xilinx-AMS-Driver/20211118-001150
        git checkout 196a4a5b4232a4a12d0843a0002b664720b5d200
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross ARCH=arc 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All error/warnings (new ones prefixed by >>):

   drivers/iio/adc/xilinx-ams.c: In function 'ams_update_intrmask':
>> drivers/iio/adc/xilinx-ams.c:323:20: error: implicit declaration of function 'FIELD_GET' [-Werror=implicit-function-declaration]
     323 |         regval = ~(FIELD_GET(AMS_ISR1_INTR_MASK, ams->intr_mask));
         |                    ^~~~~~~~~
   In file included from drivers/iio/adc/xilinx-ams.c:11:
>> include/linux/bits.h:35:29: warning: left shift count >= width of type [-Wshift-count-overflow]
      35 |         (((~UL(0)) - (UL(1) << (l)) + 1) & \
         |                             ^~
   include/linux/bits.h:38:38: note: in expansion of macro '__GENMASK'
      38 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/iio/adc/xilinx-ams.c:131:41: note: in expansion of macro 'GENMASK'
     131 | #define AMS_ISR1_INTR_MASK              GENMASK(63, 32)
         |                                         ^~~~~~~
   drivers/iio/adc/xilinx-ams.c:323:30: note: in expansion of macro 'AMS_ISR1_INTR_MASK'
     323 |         regval = ~(FIELD_GET(AMS_ISR1_INTR_MASK, ams->intr_mask));
         |                              ^~~~~~~~~~~~~~~~~~
>> include/linux/bits.h:36:18: warning: right shift count is negative [-Wshift-count-negative]
      36 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bits.h:38:38: note: in expansion of macro '__GENMASK'
      38 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/iio/adc/xilinx-ams.c:131:41: note: in expansion of macro 'GENMASK'
     131 | #define AMS_ISR1_INTR_MASK              GENMASK(63, 32)
         |                                         ^~~~~~~
   drivers/iio/adc/xilinx-ams.c:323:30: note: in expansion of macro 'AMS_ISR1_INTR_MASK'
     323 |         regval = ~(FIELD_GET(AMS_ISR1_INTR_MASK, ams->intr_mask));
         |                              ^~~~~~~~~~~~~~~~~~
>> include/linux/bits.h:35:29: warning: left shift count >= width of type [-Wshift-count-overflow]
      35 |         (((~UL(0)) - (UL(1) << (l)) + 1) & \
         |                             ^~
   include/linux/bits.h:38:38: note: in expansion of macro '__GENMASK'
      38 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/iio/adc/xilinx-ams.c:131:41: note: in expansion of macro 'GENMASK'
     131 | #define AMS_ISR1_INTR_MASK              GENMASK(63, 32)
         |                                         ^~~~~~~
   drivers/iio/adc/xilinx-ams.c:329:28: note: in expansion of macro 'AMS_ISR1_INTR_MASK'
     329 |         regval = FIELD_GET(AMS_ISR1_INTR_MASK, ams->intr_mask);
         |                            ^~~~~~~~~~~~~~~~~~
>> include/linux/bits.h:36:18: warning: right shift count is negative [-Wshift-count-negative]
      36 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bits.h:38:38: note: in expansion of macro '__GENMASK'
      38 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/iio/adc/xilinx-ams.c:131:41: note: in expansion of macro 'GENMASK'
     131 | #define AMS_ISR1_INTR_MASK              GENMASK(63, 32)
         |                                         ^~~~~~~
   drivers/iio/adc/xilinx-ams.c:329:28: note: in expansion of macro 'AMS_ISR1_INTR_MASK'
     329 |         regval = FIELD_GET(AMS_ISR1_INTR_MASK, ams->intr_mask);
         |                            ^~~~~~~~~~~~~~~~~~
   drivers/iio/adc/xilinx-ams.c: In function 'ams_update_ps_alarm':
>> drivers/iio/adc/xilinx-ams.c:360:17: error: implicit declaration of function 'FIELD_PREP' [-Werror=implicit-function-declaration]
     360 |         cfg = ~(FIELD_PREP(AMS_CONF1_ALARM_2_TO_0_MASK, val));
         |                 ^~~~~~~~~~
   In file included from drivers/iio/adc/xilinx-ams.c:11:
   drivers/iio/adc/xilinx-ams.c: In function 'ams_enable_channel_sequence':
>> include/linux/bits.h:36:18: warning: right shift count is negative [-Wshift-count-negative]
      36 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bits.h:38:38: note: in expansion of macro '__GENMASK'
      38 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/iio/adc/xilinx-ams.c:102:41: note: in expansion of macro 'GENMASK'
     102 | #define AMS_PL_SEQ_MASK                 GENMASK(59, 22)
         |                                         ^~~~~~~
   drivers/iio/adc/xilinx-ams.c:448:39: note: in expansion of macro 'AMS_PL_SEQ_MASK'
     448 |                 scan_mask = FIELD_GET(AMS_PL_SEQ_MASK, scan_mask);
         |                                       ^~~~~~~~~~~~~~~
>> include/linux/bits.h:36:18: warning: right shift count is negative [-Wshift-count-negative]
      36 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bits.h:38:38: note: in expansion of macro '__GENMASK'
      38 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/iio/adc/xilinx-ams.c:99:41: note: in expansion of macro 'GENMASK'
      99 | #define AMS_REG_SEQ1_MASK               GENMASK(37, 22)
         |                                         ^~~~~~~
   drivers/iio/adc/xilinx-ams.c:453:36: note: in expansion of macro 'AMS_REG_SEQ1_MASK'
     453 |                 regval = FIELD_GET(AMS_REG_SEQ1_MASK, scan_mask);
         |                                    ^~~~~~~~~~~~~~~~~
   drivers/iio/adc/xilinx-ams.c: In function 'ams_init_device':
>> include/linux/bits.h:36:18: warning: right shift count is negative [-Wshift-count-negative]
      36 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bits.h:38:38: note: in expansion of macro '__GENMASK'
      38 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/iio/adc/xilinx-ams.c:124:41: note: in expansion of macro 'GENMASK'
     124 | #define AMS_ALARM_MASK                  GENMASK(63, 0)
         |                                         ^~~~~~~
   drivers/iio/adc/xilinx-ams.c:501:34: note: in expansion of macro 'AMS_ALARM_MASK'
     501 |         ams_update_intrmask(ams, AMS_ALARM_MASK, AMS_ALARM_MASK);
         |                                  ^~~~~~~~~~~~~~
>> include/linux/bits.h:36:18: warning: right shift count is negative [-Wshift-count-negative]
      36 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bits.h:38:38: note: in expansion of macro '__GENMASK'
      38 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/iio/adc/xilinx-ams.c:124:41: note: in expansion of macro 'GENMASK'
     124 | #define AMS_ALARM_MASK                  GENMASK(63, 0)
         |                                         ^~~~~~~
   drivers/iio/adc/xilinx-ams.c:501:50: note: in expansion of macro 'AMS_ALARM_MASK'
     501 |         ams_update_intrmask(ams, AMS_ALARM_MASK, AMS_ALARM_MASK);
         |                                                  ^~~~~~~~~~~~~~
   drivers/iio/adc/xilinx-ams.c: In function 'ams_unmask_worker':
>> include/linux/bits.h:36:18: warning: right shift count is negative [-Wshift-count-negative]
      36 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bits.h:38:38: note: in expansion of macro '__GENMASK'
      38 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/iio/adc/xilinx-ams.c:124:41: note: in expansion of macro 'GENMASK'
     124 | #define AMS_ALARM_MASK                  GENMASK(63, 0)
         |                                         ^~~~~~~
   drivers/iio/adc/xilinx-ams.c:1017:35: note: in expansion of macro 'AMS_ALARM_MASK'
    1017 |         ams_update_intrmask(ams, ~AMS_ALARM_MASK, ~AMS_ALARM_MASK);
         |                                   ^~~~~~~~~~~~~~
>> include/linux/bits.h:36:18: warning: right shift count is negative [-Wshift-count-negative]
      36 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bits.h:38:38: note: in expansion of macro '__GENMASK'
      38 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/iio/adc/xilinx-ams.c:124:41: note: in expansion of macro 'GENMASK'
     124 | #define AMS_ALARM_MASK                  GENMASK(63, 0)
         |                                         ^~~~~~~
   drivers/iio/adc/xilinx-ams.c:1017:52: note: in expansion of macro 'AMS_ALARM_MASK'
    1017 |         ams_update_intrmask(ams, ~AMS_ALARM_MASK, ~AMS_ALARM_MASK);
         |                                                    ^~~~~~~~~~~~~~
   drivers/iio/adc/xilinx-ams.c: In function 'ams_irq':
>> include/linux/bits.h:36:18: warning: right shift count is negative [-Wshift-count-negative]
      36 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bits.h:38:38: note: in expansion of macro '__GENMASK'
      38 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/iio/adc/xilinx-ams.c:124:41: note: in expansion of macro 'GENMASK'
     124 | #define AMS_ALARM_MASK                  GENMASK(63, 0)
         |                                         ^~~~~~~
   drivers/iio/adc/xilinx-ams.c:1049:35: note: in expansion of macro 'AMS_ALARM_MASK'
    1049 |         ams_update_intrmask(ams, ~AMS_ALARM_MASK, ~AMS_ALARM_MASK);
         |                                   ^~~~~~~~~~~~~~
>> include/linux/bits.h:36:18: warning: right shift count is negative [-Wshift-count-negative]
      36 |          (~UL(0) >> (BITS_PER_LONG - 1 - (h))))
         |                  ^~
   include/linux/bits.h:38:38: note: in expansion of macro '__GENMASK'
      38 |         (GENMASK_INPUT_CHECK(h, l) + __GENMASK(h, l))
         |                                      ^~~~~~~~~
   drivers/iio/adc/xilinx-ams.c:124:41: note: in expansion of macro 'GENMASK'
     124 | #define AMS_ALARM_MASK                  GENMASK(63, 0)
         |                                         ^~~~~~~
   drivers/iio/adc/xilinx-ams.c:1049:52: note: in expansion of macro 'AMS_ALARM_MASK'
    1049 |         ams_update_intrmask(ams, ~AMS_ALARM_MASK, ~AMS_ALARM_MASK);
         |                                                    ^~~~~~~~~~~~~~
   cc1: some warnings being treated as errors


vim +/FIELD_GET +323 drivers/iio/adc/xilinx-ams.c

   313	
   314	static void ams_update_intrmask(struct ams *ams, u64 mask, u64 val)
   315	{
   316		u32 regval;
   317	
   318		ams->intr_mask = (ams->intr_mask & ~mask) | (val & mask);
   319	
   320		regval = ~(ams->intr_mask | ams->masked_alarm);
   321		writel(regval, ams->base + AMS_IER_0);
   322	
 > 323		regval = ~(FIELD_GET(AMS_ISR1_INTR_MASK, ams->intr_mask));
   324		writel(regval, ams->base + AMS_IER_1);
   325	
   326		regval = ams->intr_mask | ams->masked_alarm;
   327		writel(regval, ams->base + AMS_IDR_0);
   328	
   329		regval = FIELD_GET(AMS_ISR1_INTR_MASK, ams->intr_mask);
   330		writel(regval, ams->base + AMS_IDR_1);
   331	}
   332	
   333	static void ams_disable_all_alarms(struct ams *ams)
   334	{
   335		/* disable PS module alarm */
   336		if (ams->ps_base) {
   337			ams_ps_update_reg(ams, AMS_REG_CONFIG1, AMS_REGCFG1_ALARM_MASK,
   338					  AMS_REGCFG1_ALARM_MASK);
   339			ams_ps_update_reg(ams, AMS_REG_CONFIG3, AMS_REGCFG3_ALARM_MASK,
   340					  AMS_REGCFG3_ALARM_MASK);
   341		}
   342	
   343		/* disable PL module alarm */
   344		if (ams->pl_base) {
   345			ams_pl_update_reg(ams, AMS_REG_CONFIG1,
   346					  AMS_REGCFG1_ALARM_MASK,
   347					  AMS_REGCFG1_ALARM_MASK);
   348			ams_pl_update_reg(ams, AMS_REG_CONFIG3,
   349					  AMS_REGCFG3_ALARM_MASK,
   350					  AMS_REGCFG3_ALARM_MASK);
   351		}
   352	}
   353	
   354	static void ams_update_ps_alarm(struct ams *ams, unsigned long alarm_mask)
   355	{
   356		u32 cfg;
   357		u32 val;
   358	
   359		val = FIELD_GET(AMS_ISR0_ALARM_2_TO_0_MASK, alarm_mask);
 > 360		cfg = ~(FIELD_PREP(AMS_CONF1_ALARM_2_TO_0_MASK, val));
   361	
   362		val = FIELD_GET(AMS_ISR0_ALARM_6_TO_3_MASK, alarm_mask);
   363		cfg &= ~(FIELD_PREP(AMS_CONF1_ALARM_6_TO_3_MASK, val));
   364	
   365		ams_ps_update_reg(ams, AMS_REG_CONFIG1, AMS_REGCFG1_ALARM_MASK, cfg);
   366	
   367		val = FIELD_GET(AMS_ISR0_ALARM_12_TO_7_MASK, alarm_mask);
   368		cfg = ~(FIELD_PREP(AMS_CONF1_ALARM_12_TO_7_MASK, val));
   369		ams_ps_update_reg(ams, AMS_REG_CONFIG3, AMS_REGCFG3_ALARM_MASK, cfg);
   370	}
   371	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 42140 bytes --]

Re: [PATCH v10 3/5] iio: adc: Add Xilinx AMS driver

[Jonathan Cameron]

On Wed, 17 Nov 2021 16:10:26 +0000
Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com> wrote:

> The AMS includes an ADC as well as on-chip sensors that can be used to
> sample external voltages and monitor on-die operating conditions, such
> as temperature and supply voltage levels. The AMS has two SYSMON blocks.
> PL-SYSMON block is capable of monitoring off chip voltage and
> temperature.
> 
> PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring
> from an external master. Out of these interfaces currently only DRP is
> supported. Other block PS-SYSMON is memory mapped to PS.
> 
> The AMS can use internal channels to monitor voltage and temperature as
> well as one primary and up to 16 auxiliary channels for measuring
> external voltages.
> 
> The voltage and temperature monitoring channels also have event capability
> which allows to generate an interrupt when their value falls below or
> raises above a set threshold.
> 
> Co-developed-by: Manish Narani <manish.narani@xilinx.com>
> Signed-off-by: Manish Narani <manish.narani@xilinx.com>
> Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>

A few minor additions from me to what Andy has noted.

Thanks,

Jonathan

> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index d3f53549720c..4a8f1833993b 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -115,4 +115,5 @@ obj-$(CONFIG_VF610_ADC) += vf610_adc.o
>  obj-$(CONFIG_VIPERBOARD_ADC) += viperboard_adc.o
>  xilinx-xadc-y := xilinx-xadc-core.o xilinx-xadc-events.o
>  obj-$(CONFIG_XILINX_XADC) += xilinx-xadc.o
> +obj-$(CONFIG_XILINX_AMS) += xilinx-ams.o
>  obj-$(CONFIG_SD_ADC_MODULATOR) += sd_adc_modulator.o
> diff --git a/drivers/iio/adc/xilinx-ams.c b/drivers/iio/adc/xilinx-ams.c
> new file mode 100644
> index 000000000000..bb3876b51e3e
> --- /dev/null
> +++ b/drivers/iio/adc/xilinx-ams.c
> @@ -0,0 +1,1447 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Xilinx AMS driver
> + *
> + *  Copyright (C) 2021 Xilinx, Inc.
> + *
> + *  Manish Narani <mnarani@xilinx.com>
> + *  Rajnikant Bhojani <rajnikant.bhojani@xilinx.com>
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/overflow.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +#include <linux/slab.h>
> +
> +#include <linux/iio/events.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
Used?
> +

...

> +/**
> + * struct ams - Driver data for xilinx-ams
> + * @base: physical base address of device
> + * @ps_base: physical base address of PS device
> + * @pl_base: physical base address of PL device
> + * @clk: clocks associated with the device
> + * @dev: pointer to device struct
> + * @lock: to handle multiple user interaction
> + * @intr_lock: to protect interrupt mask values
> + * @alarm_mask: alarm configuration
> + * @masked_alarm: currently masked due to alarm
> + * @intr_mask: interrupt configuration
> + * @ams_unmask_work: re-enables event once the event condition disappears
> + *
> + * This structure contains necessary state for Sysmon driver to operate
> + */
> +struct ams {
> +	void __iomem *base;
> +	void __iomem *ps_base;
> +	void __iomem *pl_base;
> +	struct clk *clk;
> +	struct device *dev;
> +	struct mutex lock;
> +	spinlock_t intr_lock;
> +	unsigned int alarm_mask;
> +	unsigned int masked_alarm;

Hmm. maybe a rename to make these two less confusing?
Perhaps
current_masked_alarm?

> +	u64 intr_mask;
> +	struct delayed_work ams_unmask_work;
> +};
> +


...


> +
> +static void ams_handle_event(struct iio_dev *indio_dev, u32 event)
> +{
> +	const struct iio_chan_spec *chan;
> +
> +	chan = ams_event_to_channel(indio_dev, event);
> +
> +	if (chan->type == IIO_TEMP) {
> +		/*
> +		 * The temperature channel only supports over-temperature
> +		 * events.
> +		 */
> +		iio_push_event(indio_dev,
> +			       IIO_UNMOD_EVENT_CODE(chan->type, chan->channel,
> +						    IIO_EV_TYPE_THRESH,
> +						    IIO_EV_DIR_RISING),
> +			iio_get_time_ns(indio_dev));
> +	} else {
> +		/*
> +		 * For other channels we don't know whether it is a upper or
> +		 * lower threshold event. Userspace will have to check the
> +		 * channel value if it wants to know.
> +		 */
> +		iio_push_event(indio_dev,
> +			       IIO_UNMOD_EVENT_CODE(chan->type, chan->channel,
> +						    IIO_EV_TYPE_THRESH,
> +						    IIO_EV_DIR_EITHER),
> +			iio_get_time_ns(indio_dev));

I think alignment is wrong here. iio_get_time_ns() should align with opening bracket as well.

> +	}
> +}
> +

...

> +
> +static int ams_parse_firmware(struct iio_dev *indio_dev,
> +			      struct platform_device *pdev)
> +{
> +	struct ams *ams = iio_priv(indio_dev);
> +	struct iio_chan_spec *ams_channels, *dev_channels;
> +	struct fwnode_handle *child = NULL, *fwnode = dev_fwnode(&pdev->dev);

Where you have values being set, I'd prefer separate line per variable.
Tends to be a little more readable and we need all the help we can get :)

> +	size_t dev_chan_size, ams_chan_size, num_chan;
> +	int ret, ch_cnt = 0, i, rising_off, falling_off;
> +	unsigned int num_channels = 0;
> +

One blank line is almost always enough. Definitely is here.

> +
> +	num_chan = ARRAY_SIZE(ams_ps_channels) + ARRAY_SIZE(ams_pl_channels) +
> +		ARRAY_SIZE(ams_ctrl_channels);
> +
> +	ams_chan_size = array_size(num_chan, sizeof(struct iio_chan_spec));
> +	if (ams_chan_size == SIZE_MAX)
> +		return -EINVAL;
> +
> +	/* Initialize buffer for channel specification */
> +	ams_channels = kcalloc(num_chan, sizeof(struct iio_chan_spec), GFP_KERNEL);
> +	if (!ams_channels)
> +		return -ENOMEM;
> +
> +	if (fwnode_device_is_available(fwnode)) {
> +		ret = ams_init_module(indio_dev, fwnode, ams_channels);
> +		if (ret < 0)
> +			goto free_mem;
> +
> +		num_channels += ret;
> +	}
> +
> +	fwnode_for_each_child_node(fwnode, child) {
> +		if (fwnode_device_is_available(child)) {
> +			ret = ams_init_module(indio_dev, child,
> +					      ams_channels + num_channels);
> +			if (ret < 0) {
> +				fwnode_handle_put(child);
> +				goto free_mem;
> +			}
> +
> +			num_channels += ret;
> +		}
> +	}
> +
> +	for (i = 0; i < num_channels; i++) {
> +		ams_channels[i].channel = ch_cnt++;
> +
> +		if (ams_channels[i].scan_index < AMS_CTRL_SEQ_BASE) {
> +			/* set threshold to max and min for each channel */
> +			falling_off =
> +				ams_get_alarm_offset(ams_channels[i].scan_index,
> +						     IIO_EV_DIR_FALLING);
> +			rising_off =
> +				ams_get_alarm_offset(ams_channels[i].scan_index,
> +						     IIO_EV_DIR_RISING);
> +			if (ams_channels[i].scan_index >= AMS_PS_SEQ_MAX) {
> +				writel(AMS_ALARM_THR_MIN,
> +				       ams->pl_base + falling_off);
> +				writel(AMS_ALARM_THR_MAX,
> +				       ams->pl_base + rising_off);
> +			} else {
> +				writel(AMS_ALARM_THR_MIN,
> +				       ams->ps_base + falling_off);
> +				writel(AMS_ALARM_THR_MAX,
> +				       ams->ps_base + rising_off);
> +			}
> +		}
> +	}
> +
> +	dev_chan_size = array_size((size_t)num_channels, sizeof(struct iio_chan_spec));
> +	if (dev_chan_size == SIZE_MAX)

Why not goto free_mem for this error case?
Obviously should never happen, but should handle the error anyway.

> +		return -EINVAL;
> +
> +	dev_channels = devm_kcalloc(&pdev->dev, (size_t)num_channels,
> +				    sizeof(struct iio_chan_spec), GFP_KERNEL);
> +	if (!dev_channels) {
> +		ret = -ENOMEM;
> +		goto free_mem;
> +	}
> +
> +	memcpy(dev_channels, ams_channels,
> +	       sizeof(*ams_channels) * num_channels);
> +	indio_dev->channels = dev_channels;
> +	indio_dev->num_channels = num_channels;
> +
> +	ret = 0;
> +
> +free_mem:
> +	kfree(ams_channels);
> +
> +	return ret;
> +}

RE: [PATCH v10 3/5] iio: adc: Add Xilinx AMS driver

[Anand Ashok Dumbre]

Hi Cameron,

Thanks for the review.
...
> Subject: Re: [PATCH v10 3/5] iio: adc: Add Xilinx AMS driver
> 
> On Wed, 17 Nov 2021 16:10:26 +0000
> Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com> wrote:
> 
> > The AMS includes an ADC as well as on-chip sensors that can be used to
> > sample external voltages and monitor on-die operating conditions, such
> > as temperature and supply voltage levels. The AMS has two SYSMON
> blocks.
> > PL-SYSMON block is capable of monitoring off chip voltage and
> > temperature.
> >
> > PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring
> > from an external master. Out of these interfaces currently only DRP is
> > supported. Other block PS-SYSMON is memory mapped to PS.
> >
> > The AMS can use internal channels to monitor voltage and temperature
> > as well as one primary and up to 16 auxiliary channels for measuring
> > external voltages.
> >
> > The voltage and temperature monitoring channels also have event
> > capability which allows to generate an interrupt when their value
> > falls below or raises above a set threshold.
> >
> > Co-developed-by: Manish Narani <manish.narani@xilinx.com>
> > Signed-off-by: Manish Narani <manish.narani@xilinx.com>
> > Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
> 
> A few minor additions from me to what Andy has noted.
> 
> Thanks,
> 
> Jonathan
> 
> > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index
> > d3f53549720c..4a8f1833993b 100644
> > --- a/drivers/iio/adc/Makefile
> > +++ b/drivers/iio/adc/Makefile
> > @@ -115,4 +115,5 @@ obj-$(CONFIG_VF610_ADC) += vf610_adc.o
> >  obj-$(CONFIG_VIPERBOARD_ADC) += viperboard_adc.o  xilinx-xadc-y :=
> > xilinx-xadc-core.o xilinx-xadc-events.o
> >  obj-$(CONFIG_XILINX_XADC) += xilinx-xadc.o
> > +obj-$(CONFIG_XILINX_AMS) += xilinx-ams.o
> >  obj-$(CONFIG_SD_ADC_MODULATOR) += sd_adc_modulator.o diff --git
> > a/drivers/iio/adc/xilinx-ams.c b/drivers/iio/adc/xilinx-ams.c new file
> > mode 100644 index 000000000000..bb3876b51e3e
> > --- /dev/null
> > +++ b/drivers/iio/adc/xilinx-ams.c
> > @@ -0,0 +1,1447 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Xilinx AMS driver
> > + *
> > + *  Copyright (C) 2021 Xilinx, Inc.
> > + *
> > + *  Manish Narani <mnarani@xilinx.com>
> > + *  Rajnikant Bhojani <rajnikant.bhojani@xilinx.com>  */
> > +
> > +#include <linux/bits.h>
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/io.h>
> > +#include <linux/iopoll.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/mod_devicetable.h>
> > +#include <linux/overflow.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/property.h>
> > +#include <linux/slab.h>
> > +
> > +#include <linux/iio/events.h>
> > +#include <linux/iio/iio.h>
> > +#include <linux/iio/sysfs.h>
> Used?
> > +
> 
> ...
> 
> > +/**
> > + * struct ams - Driver data for xilinx-ams
> > + * @base: physical base address of device
> > + * @ps_base: physical base address of PS device
> > + * @pl_base: physical base address of PL device
> > + * @clk: clocks associated with the device
> > + * @dev: pointer to device struct
> > + * @lock: to handle multiple user interaction
> > + * @intr_lock: to protect interrupt mask values
> > + * @alarm_mask: alarm configuration
> > + * @masked_alarm: currently masked due to alarm
> > + * @intr_mask: interrupt configuration
> > + * @ams_unmask_work: re-enables event once the event condition
> > +disappears
> > + *
> > + * This structure contains necessary state for Sysmon driver to
> > +operate  */ struct ams {
> > +	void __iomem *base;
> > +	void __iomem *ps_base;
> > +	void __iomem *pl_base;
> > +	struct clk *clk;
> > +	struct device *dev;
> > +	struct mutex lock;
> > +	spinlock_t intr_lock;
> > +	unsigned int alarm_mask;
> > +	unsigned int masked_alarm;
> 
> Hmm. maybe a rename to make these two less confusing?
> Perhaps
> current_masked_alarm?
> 
> > +	u64 intr_mask;
> > +	struct delayed_work ams_unmask_work; };
> > +
> 
> 
> ...
> 
> 
> > +
> > +static void ams_handle_event(struct iio_dev *indio_dev, u32 event) {
> > +	const struct iio_chan_spec *chan;
> > +
> > +	chan = ams_event_to_channel(indio_dev, event);
> > +
> > +	if (chan->type == IIO_TEMP) {
> > +		/*
> > +		 * The temperature channel only supports over-temperature
> > +		 * events.
> > +		 */
> > +		iio_push_event(indio_dev,
> > +			       IIO_UNMOD_EVENT_CODE(chan->type, chan-
> >channel,
> > +						    IIO_EV_TYPE_THRESH,
> > +						    IIO_EV_DIR_RISING),
> > +			iio_get_time_ns(indio_dev));
> > +	} else {
> > +		/*
> > +		 * For other channels we don't know whether it is a upper or
> > +		 * lower threshold event. Userspace will have to check the
> > +		 * channel value if it wants to know.
> > +		 */
> > +		iio_push_event(indio_dev,
> > +			       IIO_UNMOD_EVENT_CODE(chan->type, chan-
> >channel,
> > +						    IIO_EV_TYPE_THRESH,
> > +						    IIO_EV_DIR_EITHER),
> > +			iio_get_time_ns(indio_dev));
> 
> I think alignment is wrong here. iio_get_time_ns() should align with opening
> bracket as well.
> 
> > +	}
> > +}
> > +
> 
> ...
> 
> > +
> > +static int ams_parse_firmware(struct iio_dev *indio_dev,
> > +			      struct platform_device *pdev) {
> > +	struct ams *ams = iio_priv(indio_dev);
> > +	struct iio_chan_spec *ams_channels, *dev_channels;
> > +	struct fwnode_handle *child = NULL, *fwnode =
> > +dev_fwnode(&pdev->dev);
> 
> Where you have values being set, I'd prefer separate line per variable.
> Tends to be a little more readable and we need all the help we can get :)
> 
> > +	size_t dev_chan_size, ams_chan_size, num_chan;
> > +	int ret, ch_cnt = 0, i, rising_off, falling_off;
> > +	unsigned int num_channels = 0;
> > +
> 
> One blank line is almost always enough. Definitely is here.
> 
> > +
> > +	num_chan = ARRAY_SIZE(ams_ps_channels) +
> ARRAY_SIZE(ams_pl_channels) +
> > +		ARRAY_SIZE(ams_ctrl_channels);
> > +
> > +	ams_chan_size = array_size(num_chan, sizeof(struct
> iio_chan_spec));
> > +	if (ams_chan_size == SIZE_MAX)
> > +		return -EINVAL;
> > +
> > +	/* Initialize buffer for channel specification */
> > +	ams_channels = kcalloc(num_chan, sizeof(struct iio_chan_spec),
> GFP_KERNEL);
> > +	if (!ams_channels)
> > +		return -ENOMEM;
> > +
> > +	if (fwnode_device_is_available(fwnode)) {
> > +		ret = ams_init_module(indio_dev, fwnode, ams_channels);
> > +		if (ret < 0)
> > +			goto free_mem;
> > +
> > +		num_channels += ret;
> > +	}
> > +
> > +	fwnode_for_each_child_node(fwnode, child) {
> > +		if (fwnode_device_is_available(child)) {
> > +			ret = ams_init_module(indio_dev, child,
> > +					      ams_channels + num_channels);
> > +			if (ret < 0) {
> > +				fwnode_handle_put(child);
> > +				goto free_mem;
> > +			}
> > +
> > +			num_channels += ret;
> > +		}
> > +	}
> > +
> > +	for (i = 0; i < num_channels; i++) {
> > +		ams_channels[i].channel = ch_cnt++;
> > +
> > +		if (ams_channels[i].scan_index < AMS_CTRL_SEQ_BASE) {
> > +			/* set threshold to max and min for each channel */
> > +			falling_off =
> > +
> 	ams_get_alarm_offset(ams_channels[i].scan_index,
> > +						     IIO_EV_DIR_FALLING);
> > +			rising_off =
> > +
> 	ams_get_alarm_offset(ams_channels[i].scan_index,
> > +						     IIO_EV_DIR_RISING);
> > +			if (ams_channels[i].scan_index >=
> AMS_PS_SEQ_MAX) {
> > +				writel(AMS_ALARM_THR_MIN,
> > +				       ams->pl_base + falling_off);
> > +				writel(AMS_ALARM_THR_MAX,
> > +				       ams->pl_base + rising_off);
> > +			} else {
> > +				writel(AMS_ALARM_THR_MIN,
> > +				       ams->ps_base + falling_off);
> > +				writel(AMS_ALARM_THR_MAX,
> > +				       ams->ps_base + rising_off);
> > +			}
> > +		}
> > +	}
> > +
> > +	dev_chan_size = array_size((size_t)num_channels, sizeof(struct
> iio_chan_spec));
> > +	if (dev_chan_size == SIZE_MAX)
> 
> Why not goto free_mem for this error case?
> Obviously should never happen, but should handle the error anyway.

Correct. But I didn't realize that kcalloc has this check done internally.
So I will remove this in the next patch.

> 
> > +		return -EINVAL;
> > +
> > +	dev_channels = devm_kcalloc(&pdev->dev, (size_t)num_channels,
> > +				    sizeof(struct iio_chan_spec), GFP_KERNEL);
> > +	if (!dev_channels) {
> > +		ret = -ENOMEM;
> > +		goto free_mem;
> > +	}
> > +
> > +	memcpy(dev_channels, ams_channels,
> > +	       sizeof(*ams_channels) * num_channels);
> > +	indio_dev->channels = dev_channels;
> > +	indio_dev->num_channels = num_channels;
> > +
> > +	ret = 0;
> > +
> > +free_mem:
> > +	kfree(ams_channels);
> > +
> > +	return ret;
> > +}
> 

I agree with everything.

RE: [PATCH v10 3/5] iio: adc: Add Xilinx AMS driver

[Anand Ashok Dumbre]

Hi Andy,

Thanks for the review.

> -----Original Message-----
> From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Sent: Thursday 18 November 2021 3:43 PM
> To: Anand Ashok Dumbre <ANANDASH@xilinx.com>
> Cc: linux-kernel@vger.kernel.org; jic23@kernel.org; lars@metafoo.de; linux-
> iio@vger.kernel.org; git <git@xilinx.com>; Michal Simek
> <michals@xilinx.com>; gregkh@linuxfoundation.org; rafael@kernel.org;
> linux-acpi@vger.kernel.org; heikki.krogerus@linux.intel.com; Manish Narani
> <MNARANI@xilinx.com>
> Subject: Re: [PATCH v10 3/5] iio: adc: Add Xilinx AMS driver
> 
> On Thu, Nov 18, 2021 at 02:14:41PM +0000, Anand Ashok Dumbre wrote:
> > > From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > > Sent: Wednesday 17 November 2021 8:03 PM On Wed, Nov 17, 2021 at
> > > 04:10:26PM +0000, Anand Ashok Dumbre wrote:
> 
> ...
> 
> > > > +			ret = ams_read_vcc_reg(ams, chan->address, val);
> > > > +			if (ret) {
> > > > +				mutex_unlock(&ams->lock);
> > > > +				return -EINVAL;
> > >
> > > Shadowed error code.
> >
> > I don’t understand.
> 
> You get an error code in ret variable, but you always return -EINVAL, why?

Got it. Will fix it.

> 
> > > > +			}
> 
> ...
> 
> > > default: ?
> >
> > This is limited by hw bits.
> > For default I will use the default scan_index value.
> > Is that ok?
> 
> I think so, you know hardware better, you decide what to put there.

Will do

> 
> ...
> 
> > > > +		if (ret || reg > (AMS_PL_MAX_EXT_CHANNEL + 30))
> > >
> > > Too many parentheses.
> >
> > Is it a good practice to not have parantheses around
> (AMS_PL_MAX_EXT_CHANNEL + 30) ?
> 
> It's minor thing, up to you.
> 
> > > > +			continue;
> 
> ...
> 
> > > > +	dev_chan_size = array_size((size_t)num_channels, sizeof(struct
> > > iio_chan_spec));
> > > > +	if (dev_chan_size == SIZE_MAX)
> > > > +		return -EINVAL;
> > >
> > > Why is it needed now?

I didn’t see kcalloc did it internally. I will remove it.

> > >
> > > > +	dev_channels = devm_kcalloc(&pdev->dev, (size_t)num_channels,
> > >
> > > Why casting?

Removed.

> > >
> > > > +				    sizeof(struct iio_chan_spec), GFP_KERNEL);
> > >
> > > sizeof(*dev_channels)
> > >
> > > > +	if (!dev_channels) {
> > > > +		ret = -ENOMEM;
> > > > +		goto free_mem;
> > > > +	}
> > >
> > > > +	memcpy(dev_channels, ams_channels,
> > > > +	       sizeof(*ams_channels) * num_channels);
> > >
> > > Hmm... according to the code the num_channels can be less than or
> > > equal to num_chan. Hence, what you should use is the
> devm_krealloc_array().
> > >
> > > static inline void *devm_krealloc_aray(...) {
> > > 	...see how krealloc_array() is defined...
> > > }
> > >
> > > No need to copy memory again.
> >
> > Will take a look.

I did see that there was previously a devm_krealloc_array implementation sent for the other Xilinx xadc driver.

https://patchwork.kernel.org/project/linux-iio/patch/20201102142228.14949-2-brgl@bgdev.pl/

From the conversations based here, should the use of devm_krealloc just be fine?
If not, I will send a patch with devm_krealloc for now, and then I can send a patch later for devm_krealloc array and
Its usage for both Xilinx-ams and xadc driver as well.


> 
> --
> With Best Regards,
> Andy Shevchenko
> 

Thanks,
Anand