From: Shawn Guo <shawn.guo@linaro.org>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>,
Loic Poulain <loic.poulain@linaro.org>,
linux-gpio@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org, Shawn Guo <shawn.guo@linaro.org>
Subject: [PATCH] pinctrl: qcom: qcm2290: Add GPIO wakeirq map
Date: Mon, 22 Nov 2021 16:09:38 +0800 [thread overview]
Message-ID: <20211122080938.20623-1-shawn.guo@linaro.org> (raw)
It adds the map of wakeup capable GPIOs and the pins at MPM wake
controller on QCM2290, so that these GPIOs can wake up the SoC from
vlow/vmin low power mode.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
drivers/pinctrl/qcom/pinctrl-qcm2290.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/pinctrl/qcom/pinctrl-qcm2290.c b/drivers/pinctrl/qcom/pinctrl-qcm2290.c
index 3f05c0a24b79..aa9325f333fb 100644
--- a/drivers/pinctrl/qcom/pinctrl-qcm2290.c
+++ b/drivers/pinctrl/qcom/pinctrl-qcm2290.c
@@ -1083,6 +1083,16 @@ static const struct msm_pingroup qcm2290_groups[] = {
[133] = SDC_QDSD_PINGROUP(sdc2_data, 0x86000, 9, 0),
};
+static const struct msm_gpio_wakeirq_map qcm2290_mpm_map[] = {
+ { 0, 84 }, { 3, 75 }, { 4, 16 }, { 6, 59 }, { 8, 63 }, { 11, 17 },
+ { 13, 18 }, { 14, 51 }, { 17, 20 }, { 18, 52 }, { 19, 53 }, { 24, 6 },
+ { 25, 71 }, { 27, 73 }, { 28, 41 }, { 31, 27 }, { 32, 54 }, { 33, 55 },
+ { 34, 56 }, { 35, 57 }, { 36, 58 }, { 39, 28 }, { 46, 29 }, { 62, 60 },
+ { 63, 61 }, { 64, 62 }, { 69, 33 }, { 70, 34 }, { 72, 72 }, { 75, 35 },
+ { 79, 36 }, { 80, 21 }, { 81, 38 }, { 86, 19 }, { 87, 42 }, { 88, 43 },
+ { 89, 45 }, { 91, 74 }, { 94, 47 }, { 95, 48 }, { 96, 49 }, { 97, 50 },
+};
+
static const struct msm_pinctrl_soc_data qcm2290_pinctrl = {
.pins = qcm2290_pins,
.npins = ARRAY_SIZE(qcm2290_pins),
@@ -1091,6 +1101,8 @@ static const struct msm_pinctrl_soc_data qcm2290_pinctrl = {
.groups = qcm2290_groups,
.ngroups = ARRAY_SIZE(qcm2290_groups),
.ngpios = 127,
+ .wakeirq_map = qcm2290_mpm_map,
+ .nwakeirq_map = ARRAY_SIZE(qcm2290_mpm_map),
};
static int qcm2290_pinctrl_probe(struct platform_device *pdev)
--
2.17.1
next reply other threads:[~2021-11-22 8:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-22 8:09 Shawn Guo [this message]
2022-02-14 10:47 ` [PATCH] pinctrl: qcom: qcm2290: Add GPIO wakeirq map Shawn Guo
2022-02-19 0:59 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211122080938.20623-1-shawn.guo@linaro.org \
--to=shawn.guo@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=loic.poulain@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).