[PATCH 5.4 000/100] 5.4.162-rc1 review

[PATCH 5.4 000/100] 5.4.162-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.162 release.
There are 100 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri, 26 Nov 2021 11:56:36 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.162-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.162-rc1

Nadav Amit <namit@vmware.com>
    hugetlbfs: flush TLBs correctly after huge_pmd_unshare

Peter Zijlstra (Intel) <peterz@infradead.org>
    tlb: mmu_gather: add tlb_flush_*_range APIs

Leon Romanovsky <leonro@nvidia.com>
    ice: Delete always true check of PF pointer

Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    usb: max-3421: Use driver data instead of maintaining a list of bound devices

Takashi Iwai <tiwai@suse.de>
    ASoC: DAPM: Cover regression by kctl change notification fix

Sven Eckelmann <sven@narfation.org>
    batman-adv: Don't always reallocate the fragmentation skb head

Sven Eckelmann <sven@narfation.org>
    batman-adv: Reserve needed_*room for fragments

Sven Eckelmann <sven@narfation.org>
    batman-adv: Consider fragmentation for needed_headroom

Greg Thelen <gthelen@google.com>
    perf/core: Avoid put_page() when GUP fails

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "net: mvpp2: disable force link UP during port init procedure"

hongao <hongao@uniontech.com>
    drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga and dvi connectors

Imre Deak <imre.deak@intel.com>
    drm/i915/dp: Ensure sink rate values are always valid

Jeremy Cline <jcline@redhat.com>
    drm/nouveau: use drm_dev_unplug() during device removal

Johan Hovold <johan@kernel.org>
    drm/udl: fix control-message timeout

Nguyen Dinh Phi <phind.uet@gmail.com>
    cfg80211: call cfg80211_stop_ap when switch from P2P_GO type

Sven Schnelle <svens@stackframe.org>
    parisc/sticon: fix reverse colors

Nikolay Borisov <nborisov@suse.com>
    btrfs: fix memory ordering between normal and ordered work functions

Jan Kara <jack@suse.cz>
    udf: Fix crash after seekdir

Baoquan He <bhe@redhat.com>
    s390/kexec: fix memory leak of ipl report buffer

Sean Christopherson <seanjc@google.com>
    x86/hyperv: Fix NULL deref in set_hv_tscchange_cb() if Hyper-V setup fails

Rustam Kovhaev <rkovhaev@gmail.com>
    mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag

Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
    ipc: WARN if trying to remove ipc object which is absent

Nathan Chancellor <nathan@kernel.org>
    hexagon: export raw I/O routines for modules

Nicolas Dichtel <nicolas.dichtel@6wind.com>
    tun: fix bonding active backup with arp monitoring

Nick Desaulniers <ndesaulniers@google.com>
    arm64: vdso32: suppress error message for 'make mrproper'

Heiko Carstens <hca@linux.ibm.com>
    s390/kexec: fix return code handling

Alexander Antonov <alexander.antonov@linux.intel.com>
    perf/x86/intel/uncore: Fix IIO event constraints for Skylake Server

Alexander Antonov <alexander.antonov@linux.intel.com>
    perf/x86/intel/uncore: Fix filter_tid mask for CHA events on Skylake Server

Michael Ellerman <mpe@ellerman.id.au>
    KVM: PPC: Book3S HV: Use GLOBAL_TOC for kvmppc_h_set_dabr/xdabr()

Sohaib Mohamed <sohaib.amhmd@gmail.com>
    perf bench: Fix two memory leaks detected with ASan

Lin Ma <linma@zju.edu.cn>
    NFC: reorder the logic in nfc_{un,}register_device

Hans Verkuil <hverkuil-cisco@xs4all.nl>
    drm/nouveau: hdmigv100.c: fix corrupted HDMI Vendor InfoFrame

Lin Ma <linma@zju.edu.cn>
    NFC: reorganize the functions in nci_request

Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
    i40e: Fix display error code in dmesg

Jedrzej Jagielski <jedrzej.jagielski@intel.com>
    i40e: Fix creation of first queue by omitting it if is not power of two

Eryk Rybak <eryk.roch.rybak@intel.com>
    i40e: Fix ping is lost after configuring ADq on VF

Eryk Rybak <eryk.roch.rybak@intel.com>
    i40e: Fix changing previously set num_queue_pairs for PFs

Michal Maloszewski <michal.maloszewski@intel.com>
    i40e: Fix NULL ptr dereference on VSI filter sync

Eryk Rybak <eryk.roch.rybak@intel.com>
    i40e: Fix correct max_pkt_size on VF RX queue

Jonathan Davies <jonathan.davies@nutanix.com>
    net: virtio_net_hdr_to_skb: count transport header in UFO

Pavel Skripkin <paskripkin@gmail.com>
    net: dpaa2-eth: fix use-after-free in dpaa2_eth_remove

Xin Long <lucien.xin@gmail.com>
    net: sched: act_mirred: drop dst for the direction from egress to ingress

Mike Christie <michael.christie@oracle.com>
    scsi: core: sysfs: Fix hang when device state is set via sysfs

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()'

Randy Dunlap <rdunlap@infradead.org>
    mips: lantiq: add support for clk_get_parent()

Randy Dunlap <rdunlap@infradead.org>
    mips: bcm63xx: add support for clk_get_parent()

Colin Ian King <colin.i.king@googlemail.com>
    MIPS: generic/yamon-dt: fix uninitialized variable error

Surabhi Boob <surabhi.boob@intel.com>
    iavf: Fix for the false positive ASQ/ARQ errors while issuing VF reset

Mitch Williams <mitch.a.williams@intel.com>
    iavf: validate pointers

Jacob Keller <jacob.e.keller@intel.com>
    iavf: prevent accidental free of filter structure

Piotr Marczak <piotr.marczak@intel.com>
    iavf: Fix failure to exit out from last all-multicast mode

Nicholas Nunley <nicholas.d.nunley@intel.com>
    iavf: free q_vectors before queues in iavf_disable_vf

Nicholas Nunley <nicholas.d.nunley@intel.com>
    iavf: check for null in iavf_fix_features

Pavel Skripkin <paskripkin@gmail.com>
    net: bnx2x: fix variable dereferenced before check

James Clark <james.clark@arm.com>
    perf tests: Remove bash construct from record+zstd_comp_decomp.sh

Sohaib Mohamed <sohaib.amhmd@gmail.com>
    perf bench futex: Fix memory leak of perf_cpu_map__new()

Ian Rogers <irogers@google.com>
    perf bpf: Avoid memory leak from perf_env__insert_btf()

Leon Romanovsky <leonro@nvidia.com>
    RDMA/netlink: Add __maybe_unused to static inline in C file

Masami Hiramatsu <mhiramat@kernel.org>
    tracing/histogram: Do not copy the fixed-size char array field over the field size

Tom Zanussi <zanussi@kernel.org>
    tracing: Save normal string variables

Vincent Donnefort <vincent.donnefort@arm.com>
    sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()

Randy Dunlap <rdunlap@infradead.org>
    mips: BCM63XX: ensure that CPU_SUPPORTS_32BIT_KERNEL is set

Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
    clk: qcom: gcc-msm8996: Drop (again) gcc_aggre1_pnoc_ahb_clk

Joel Stanley <joel@jms.id.au>
    clk/ast2600: Fix soc revision for AHB

Paul Cercueil <paul@crapouillou.net>
    clk: ingenic: Fix bugs with divided dividers

Randy Dunlap <rdunlap@infradead.org>
    sh: define __BIG_ENDIAN for math-emu

Randy Dunlap <rdunlap@infradead.org>
    sh: math-emu: drop unused functions

Randy Dunlap <rdunlap@infradead.org>
    sh: fix kconfig unmet dependency warning for FRAME_POINTER

Gao Xiang <hsiangkao@linux.alibaba.com>
    f2fs: fix up f2fs_lookup tracepoints

Lu Wei <luwei32@huawei.com>
    maple: fix wrong return value of maple_bus_init().

Nick Desaulniers <ndesaulniers@google.com>
    sh: check return code of request_irq

Michael Ellerman <mpe@ellerman.id.au>
    powerpc/dcr: Use cmplwi instead of 3-argument cmpli

Chengfeng Ye <cyeaa@connect.ust.hk>
    ALSA: gus: fix null pointer dereference on pointer block

Anatolij Gustschin <agust@denx.de>
    powerpc/5200: dts: fix memory node unit name

Teng Qi <starmiku1207184332@gmail.com>
    iio: imu: st_lsm6dsx: Avoid potential array overflow in st_lsm6dsx_set_odr()

Mike Christie <michael.christie@oracle.com>
    scsi: target: Fix alua_tg_pt_gps_count tracking

Mike Christie <michael.christie@oracle.com>
    scsi: target: Fix ordered tag handling

Bart Van Assche <bvanassche@acm.org>
    MIPS: sni: Fix the build

Guanghui Feng <guanghuifeng@linux.alibaba.com>
    tty: tty_buffer: Fix the softlockup issue in flush_to_ldisc

Randy Dunlap <rdunlap@infradead.org>
    ALSA: ISA: not for M68K

Li Yang <leoyang.li@nxp.com>
    ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flash

Li Yang <leoyang.li@nxp.com>
    ARM: dts: ls1021a: move thermal-zones node out of soc/

Yang Yingliang <yangyingliang@huawei.com>
    usb: host: ohci-tmio: check return value after calling platform_get_resource()

Roger Quadros <rogerq@kernel.org>
    ARM: dts: omap: fix gpmc,mux-add-data type

Luis Chamberlain <mcgrof@kernel.org>
    firmware_loader: fix pre-allocated buf built-in firmware use

Guo Zhi <qtxuning1999@sjtu.edu.cn>
    scsi: advansys: Fix kernel pointer leak

Hans de Goede <hdegoede@redhat.com>
    ASoC: nau8824: Add DMI quirk mechanism for active-high jack-detect

Stefan Riedmueller <s.riedmueller@phytec.de>
    clk: imx: imx6ul: Move csi_sel mux to correct base register

Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
    ASoC: SOF: Intel: hda-dai: fix potential locking issue

Michael Walle <michael@walle.cc>
    arm64: dts: freescale: fix arm,sp805 compatible string

Stephan Gerhold <stephan@gerhold.net>
    arm64: dts: qcom: msm8916: Add unit name for /soc node

AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
    arm64: dts: qcom: msm8998: Fix CPU/L2 idle state latency and residency

Sven Peter <sven@svenpeter.dev>
    usb: typec: tipd: Remove WARN_ON in tps6598x_block_read

Yang Yingliang <yangyingliang@huawei.com>
    usb: musb: tusb6010: check return value after calling platform_get_resource()

Selvin Xavier <selvin.xavier@broadcom.com>
    RDMA/bnxt_re: Check if the vlan is valid before reporting

Michael Walle <michael@walle.cc>
    arm64: dts: hisilicon: fix arm,sp805 compatible string

James Smart <jsmart2021@gmail.com>
    scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq()

Matthew Hagan <mnhagan88@gmail.com>
    ARM: dts: NSP: Fix mpcore, mmc node names

Michal Simek <michal.simek@xilinx.com>
    arm64: zynqmp: Fix serial compatible string

Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
    arm64: zynqmp: Do not duplicate flash partition label property


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm/boot/dts/bcm-nsp.dtsi                     |   4 +-
 arch/arm/boot/dts/ls1021a-tsn.dts                  |   2 +-
 arch/arm/boot/dts/ls1021a.dtsi                     |  66 ++++-----
 arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi          |   2 +-
 arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi  |   2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi     |  16 +--
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi     |  16 +--
 arch/arm64/boot/dts/hisilicon/hi3660.dtsi          |   4 +-
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi          |   2 +-
 arch/arm64/boot/dts/qcom/msm8916.dtsi              |   2 +-
 arch/arm64/boot/dts/qcom/msm8998.dtsi              |  20 +--
 .../boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts    |   4 +-
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi             |   4 +-
 arch/arm64/kernel/vdso32/Makefile                  |   3 +-
 arch/hexagon/lib/io.c                              |   4 +
 arch/mips/Kconfig                                  |   3 +
 arch/mips/bcm63xx/clk.c                            |   6 +
 arch/mips/generic/yamon-dt.c                       |   2 +-
 arch/mips/lantiq/clk.c                             |   6 +
 arch/mips/sni/time.c                               |   4 +-
 arch/powerpc/boot/dts/charon.dts                   |   2 +-
 arch/powerpc/boot/dts/digsy_mtc.dts                |   2 +-
 arch/powerpc/boot/dts/lite5200.dts                 |   2 +-
 arch/powerpc/boot/dts/lite5200b.dts                |   2 +-
 arch/powerpc/boot/dts/media5200.dts                |   2 +-
 arch/powerpc/boot/dts/mpc5200b.dtsi                |   2 +-
 arch/powerpc/boot/dts/o2d.dts                      |   2 +-
 arch/powerpc/boot/dts/o2d.dtsi                     |   2 +-
 arch/powerpc/boot/dts/o2dnt2.dts                   |   2 +-
 arch/powerpc/boot/dts/o3dnt.dts                    |   2 +-
 arch/powerpc/boot/dts/pcm032.dts                   |   2 +-
 arch/powerpc/boot/dts/tqm5200.dts                  |   2 +-
 arch/powerpc/kvm/book3s_hv_rmhandlers.S            |   4 +-
 arch/powerpc/sysdev/dcr-low.S                      |   2 +-
 arch/s390/include/asm/kexec.h                      |   6 +
 arch/s390/kernel/ipl.c                             |   3 +-
 arch/s390/kernel/machine_kexec_file.c              |  18 ++-
 arch/sh/Kconfig.debug                              |   1 +
 arch/sh/include/asm/sfp-machine.h                  |   8 ++
 arch/sh/kernel/cpu/sh4a/smp-shx3.c                 |   5 +-
 arch/sh/math-emu/math.c                            | 103 -------------
 arch/x86/events/intel/uncore_snbep.c               |   4 +
 arch/x86/hyperv/hv_init.c                          |   3 +
 drivers/base/firmware_loader/main.c                |  13 +-
 drivers/clk/clk-ast2600.c                          |  12 +-
 drivers/clk/imx/clk-imx6ul.c                       |   2 +-
 drivers/clk/ingenic/cgu.c                          |   6 +-
 drivers/clk/qcom/gcc-msm8996.c                     |  15 --
 drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c     |   1 +
 drivers/gpu/drm/i915/display/intel_dp.c            |  11 ++
 drivers/gpu/drm/nouveau/nouveau_drm.c              |   2 +-
 .../gpu/drm/nouveau/nvkm/engine/disp/hdmigv100.c   |   1 -
 drivers/gpu/drm/udl/udl_connector.c                |   2 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c       |   6 +-
 drivers/infiniband/hw/bnxt_re/ib_verbs.c           |  12 +-
 .../net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h   |   4 +-
 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c   |   4 +-
 drivers/net/ethernet/intel/i40e/i40e.h             |   2 +
 drivers/net/ethernet/intel/i40e/i40e_main.c        | 160 +++++++++++++--------
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c |  70 +++------
 drivers/net/ethernet/intel/iavf/iavf_ethtool.c     |  13 +-
 drivers/net/ethernet/intel/iavf/iavf_main.c        |  14 +-
 drivers/net/ethernet/intel/ice/ice_main.c          |   3 -
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c    |  14 +-
 drivers/net/tun.c                                  |   5 +
 drivers/platform/x86/hp_accel.c                    |   2 +
 drivers/scsi/advansys.c                            |   4 +-
 drivers/scsi/lpfc/lpfc_sli.c                       |   1 +
 drivers/scsi/scsi_sysfs.c                          |  30 ++--
 drivers/sh/maple/maple.c                           |   5 +-
 drivers/target/target_core_alua.c                  |   1 -
 drivers/target/target_core_device.c                |   2 +
 drivers/target/target_core_internal.h              |   1 +
 drivers/target/target_core_transport.c             |  76 +++++++---
 drivers/tty/tty_buffer.c                           |   3 +
 drivers/usb/host/max3421-hcd.c                     |  25 +---
 drivers/usb/host/ohci-tmio.c                       |   2 +-
 drivers/usb/musb/tusb6010.c                        |   5 +
 drivers/usb/typec/tps6598x.c                       |   2 +-
 drivers/video/console/sticon.c                     |  12 +-
 fs/btrfs/async-thread.c                            |  14 ++
 fs/udf/dir.c                                       |  32 ++++-
 fs/udf/namei.c                                     |   3 +
 fs/udf/super.c                                     |   2 +
 include/asm-generic/tlb.h                          |  55 +++++--
 include/linux/virtio_net.h                         |   7 +-
 include/rdma/rdma_netlink.h                        |   2 +-
 include/target/target_core_base.h                  |   6 +-
 include/trace/events/f2fs.h                        |  12 +-
 ipc/util.c                                         |   6 +-
 kernel/events/core.c                               |  10 +-
 kernel/sched/core.c                                |   3 +
 kernel/trace/trace_events_hist.c                   |  41 +++++-
 mm/hugetlb.c                                       |  23 ++-
 mm/slab.h                                          |   2 +-
 net/batman-adv/fragmentation.c                     |  26 ++--
 net/batman-adv/hard-interface.c                    |   3 +
 net/nfc/core.c                                     |  32 +++--
 net/nfc/nci/core.c                                 |  11 +-
 net/sched/act_mirred.c                             |  11 +-
 net/wireless/util.c                                |   1 +
 sound/core/Makefile                                |   2 +
 sound/isa/Kconfig                                  |   2 +-
 sound/isa/gus/gus_dma.c                            |   2 +
 sound/pci/Kconfig                                  |   1 +
 sound/soc/codecs/nau8824.c                         |  40 ++++++
 sound/soc/soc-dapm.c                               |  29 +++-
 sound/soc/sof/intel/hda-dai.c                      |   7 +-
 tools/perf/bench/futex-lock-pi.c                   |   1 +
 tools/perf/bench/futex-requeue.c                   |   1 +
 tools/perf/bench/futex-wake-parallel.c             |   1 +
 tools/perf/bench/futex-wake.c                      |   1 +
 tools/perf/bench/sched-messaging.c                 |   4 +
 tools/perf/tests/shell/record+zstd_comp_decomp.sh  |   2 +-
 tools/perf/util/bpf-event.c                        |   6 +-
 tools/perf/util/env.c                              |   5 +-
 tools/perf/util/env.h                              |   2 +-
 118 files changed, 779 insertions(+), 529 deletions(-)

[PATCH 5.4 001/100] arm64: zynqmp: Do not duplicate flash partition label property

[Greg Kroah-Hartman]

From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>

[ Upstream commit 167721a5909f867f8c18c8e78ea58e705ad9bbd4 ]

In kernel 5.4, support has been added for reading MTD devices via the nvmem
API.
For this the mtd devices are registered as read-only NVMEM providers under
sysfs with the same name as the flash partition label property.

So if flash partition label property of multiple flash devices are
identical then the second mtd device fails to get registered as a NVMEM
provider.

This patch fixes the issue by having different label property for different
flashes.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/6c4b9b9232b93d9e316a63c086540fd5bf6b8687.1623684253.git.michal.simek@xilinx.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
index 2421ec71a201c..41a66787247b6 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
@@ -131,7 +131,7 @@
 		reg = <0>;
 
 		partition@0 {
-			label = "data";
+			label = "spi0-data";
 			reg = <0x0 0x100000>;
 		};
 	};
@@ -149,7 +149,7 @@
 		reg = <0>;
 
 		partition@0 {
-			label = "data";
+			label = "spi1-data";
 			reg = <0x0 0x84000>;
 		};
 	};
-- 
2.33.0

[PATCH 5.4 002/100] arm64: zynqmp: Fix serial compatible string

[Greg Kroah-Hartman]

From: Michal Simek <michal.simek@xilinx.com>

[ Upstream commit 812fa2f0e9d33564bd0131a69750e0d165f4c82a ]

Based on commit 65a2c14d4f00 ("dt-bindings: serial: convert Cadence UART
bindings to YAML") compatible string should look like differently that's
why fix it to be aligned with dt binding.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/89b36e0a6187cc6b05b27a035efdf79173bd4486.1628240307.git.michal.simek@xilinx.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index a2645262f8623..b92549fb32400 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -582,7 +582,7 @@
 		};
 
 		uart0: serial@ff000000 {
-			compatible = "cdns,uart-r1p12", "xlnx,xuartps";
+			compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 21 4>;
@@ -591,7 +591,7 @@
 		};
 
 		uart1: serial@ff010000 {
-			compatible = "cdns,uart-r1p12", "xlnx,xuartps";
+			compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 22 4>;
-- 
2.33.0

[PATCH 5.4 003/100] ARM: dts: NSP: Fix mpcore, mmc node names

[Greg Kroah-Hartman]

From: Matthew Hagan <mnhagan88@gmail.com>

[ Upstream commit 15a563d008ef9d04df525f0c476cd7d7127bb883 ]

Running dtbs_check yielded the issues with bcm-nsp.dtsi.

Firstly this patch fixes the following message by appending "-bus" to
the mpcore node name:
mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Secondly mmc node name. The label name can remain as is.
sdhci@21000: $nodename:0: 'sdhci@21000' does not match '^mmc(@.*)?$'

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm-nsp.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 43ff85d31dc12..5a1352fd90d16 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -77,7 +77,7 @@
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
-	mpcore@19000000 {
+	mpcore-bus@19000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x19000000 0x00023000>;
 		#address-cells = <1>;
@@ -217,7 +217,7 @@
 			#dma-cells = <1>;
 		};
 
-		sdio: sdhci@21000 {
+		sdio: mmc@21000 {
 			compatible = "brcm,sdhci-iproc-cygnus";
 			reg = <0x21000 0x100>;
 			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.33.0

[PATCH 5.4 004/100] scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq()

[Greg Kroah-Hartman]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 99154581b05c8fb22607afb7c3d66c1bace6aa5d ]

When parsing the txq list in lpfc_drain_txq(), the driver attempts to pass
the requests to the adapter. If such an attempt fails, a local "fail_msg"
string is set and a log message output.  The job is then added to a
completions list for cancellation.

Processing of any further jobs from the txq list continues, but since
"fail_msg" remains set, jobs are added to the completions list regardless
of whether a wqe was passed to the adapter.  If successfully added to
txcmplq, jobs are added to both lists resulting in list corruption.

Fix by clearing the fail_msg string after adding a job to the completions
list. This stops the subsequent jobs from being added to the completions
list unless they had an appropriate failure.

Link: https://lore.kernel.org/r/20210910233159.115896-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_sli.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 4a7ceaa34341c..51bab0979527b 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -19692,6 +19692,7 @@ lpfc_drain_txq(struct lpfc_hba *phba)
 					fail_msg,
 					piocbq->iotag, piocbq->sli4_xritag);
 			list_add_tail(&piocbq->list, &completions);
+			fail_msg = NULL;
 		}
 		spin_unlock_irqrestore(&pring->ring_lock, iflags);
 	}
-- 
2.33.0

[PATCH 5.4 005/100] arm64: dts: hisilicon: fix arm,sp805 compatible string

[Greg Kroah-Hartman]

From: Michael Walle <michael@walle.cc>

[ Upstream commit 894d4f1f77d0e88f1f81af2e1e37333c1c41b631 ]

According to Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
the compatible is:
  compatible = "arm,sp805", "arm,primecell";

The current compatible string doesn't exist at all. Fix it.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 4 ++--
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 253cc345f143a..0c88b72094774 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1086,7 +1086,7 @@
 		};
 
 		watchdog0: watchdog@e8a06000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xe8a06000 0x0 0x1000>;
 			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg_ctrl HI3660_OSC32K>;
@@ -1094,7 +1094,7 @@
 		};
 
 		watchdog1: watchdog@e8a07000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xe8a07000 0x0 0x1000>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg_ctrl HI3660_OSC32K>;
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 108e2a4227f66..568faaba7ace9 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -839,7 +839,7 @@
 		};
 
 		watchdog0: watchdog@f8005000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xf8005000 0x0 0x1000>;
 			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ao_ctrl HI6220_WDT0_PCLK>;
-- 
2.33.0

[PATCH 5.4 006/100] RDMA/bnxt_re: Check if the vlan is valid before reporting

[Greg Kroah-Hartman]

From: Selvin Xavier <selvin.xavier@broadcom.com>

[ Upstream commit 6bda39149d4b8920fdb8744090653aca3daa792d ]

When VF is configured with default vlan, HW strips the vlan from the
packet and driver receives it in Rx completion. VLAN needs to be reported
for UD work completion only if the vlan is configured on the host. Add a
check for valid vlan in the UD receive path.

Link: https://lore.kernel.org/r/1631709163-2287-12-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/bnxt_re/ib_verbs.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.c b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
index a96f9142fe08e..dd006b177b544 100644
--- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c
+++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
@@ -3081,8 +3081,11 @@ static void bnxt_re_process_res_ud_wc(struct bnxt_re_qp *qp,
 				      struct ib_wc *wc,
 				      struct bnxt_qplib_cqe *cqe)
 {
+	struct bnxt_re_dev *rdev;
+	u16 vlan_id = 0;
 	u8 nw_type;
 
+	rdev = qp->rdev;
 	wc->opcode = IB_WC_RECV;
 	wc->status = __rc_to_ib_wc_status(cqe->status);
 
@@ -3094,9 +3097,12 @@ static void bnxt_re_process_res_ud_wc(struct bnxt_re_qp *qp,
 		memcpy(wc->smac, cqe->smac, ETH_ALEN);
 		wc->wc_flags |= IB_WC_WITH_SMAC;
 		if (cqe->flags & CQ_RES_UD_FLAGS_META_FORMAT_VLAN) {
-			wc->vlan_id = (cqe->cfa_meta & 0xFFF);
-			if (wc->vlan_id < 0x1000)
-				wc->wc_flags |= IB_WC_WITH_VLAN;
+			vlan_id = (cqe->cfa_meta & 0xFFF);
+		}
+		/* Mark only if vlan_id is non zero */
+		if (vlan_id && bnxt_re_check_if_vlan_valid(rdev, vlan_id)) {
+			wc->vlan_id = vlan_id;
+			wc->wc_flags |= IB_WC_WITH_VLAN;
 		}
 		nw_type = (cqe->flags & CQ_RES_UD_FLAGS_ROCE_IP_VER_MASK) >>
 			   CQ_RES_UD_FLAGS_ROCE_IP_VER_SFT;
-- 
2.33.0

[PATCH 5.4 007/100] usb: musb: tusb6010: check return value after calling platform_get_resource()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 14651496a3de6807a17c310f63c894ea0c5d858e ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210915034925.2399823-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/musb/tusb6010.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 4ecfbf6bb1fa8..902507da8aa85 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -1103,6 +1103,11 @@ static int tusb_musb_init(struct musb *musb)
 
 	/* dma address for async dma */
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		pr_debug("no async dma resource?\n");
+		ret = -ENODEV;
+		goto done;
+	}
 	musb->async = mem->start;
 
 	/* dma address for sync dma */
-- 
2.33.0

[PATCH 5.4 008/100] usb: typec: tipd: Remove WARN_ON in tps6598x_block_read

[Greg Kroah-Hartman]

From: Sven Peter <sven@svenpeter.dev>

[ Upstream commit b7a0a63f3fed57d413bb857de164ea9c3984bc4e ]

Calling tps6598x_block_read with a higher than allowed len can be
handled by just returning an error. There's no need to crash systems
with panic-on-warn enabled.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20210914140235.65955-3-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/typec/tps6598x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/typec/tps6598x.c b/drivers/usb/typec/tps6598x.c
index a38d1409f15b7..67bebee693301 100644
--- a/drivers/usb/typec/tps6598x.c
+++ b/drivers/usb/typec/tps6598x.c
@@ -109,7 +109,7 @@ tps6598x_block_read(struct tps6598x *tps, u8 reg, void *val, size_t len)
 	u8 data[TPS_MAX_LEN + 1];
 	int ret;
 
-	if (WARN_ON(len + 1 > sizeof(data)))
+	if (len + 1 > sizeof(data))
 		return -EINVAL;
 
 	if (!tps->i2c_protocol)
-- 
2.33.0

[PATCH 5.4 009/100] arm64: dts: qcom: msm8998: Fix CPU/L2 idle state latency and residency

[Greg Kroah-Hartman]

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>

[ Upstream commit 3f1dcaff642e75c1d2ad03f783fa8a3b1f56dd50 ]

The entry/exit latency and minimum residency in state for the idle
states of MSM8998 were ..bad: first of all, for all of them the
timings were written for CPU sleep but the min-residency-us param
was miscalculated (supposedly, while porting this from downstream);
Then, the power collapse states are setting PC on both the CPU
cluster *and* the L2 cache, which have different timings: in the
specific case of L2 the times are higher so these ones should be
taken into account instead of the CPU ones.

This parameter misconfiguration was not giving particular issues
because on MSM8998 there was no CPU scaling at all, so cluster/L2
power collapse was rarely (if ever) hit.
When CPU scaling is enabled, though, the wrong timings will produce
SoC unstability shown to the user as random, apparently error-less,
sudden reboots and/or lockups.

This set of parameters are stabilizing the SoC when CPU scaling is
ON and when power collapse is frequently hit.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210901183123.1087392-3-angelogioacchino.delregno@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8998.dtsi | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index ccd535edbf4e1..dcb79003ca0e6 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -246,38 +246,42 @@
 			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-retention";
+				/* CPU Retention (C2D), L2 Active */
 				arm,psci-suspend-param = <0x00000002>;
 				entry-latency-us = <81>;
 				exit-latency-us = <86>;
-				min-residency-us = <200>;
+				min-residency-us = <504>;
 			};
 
 			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "little-power-collapse";
+				/* CPU + L2 Power Collapse (C3, D4) */
 				arm,psci-suspend-param = <0x40000003>;
-				entry-latency-us = <273>;
-				exit-latency-us = <612>;
-				min-residency-us = <1000>;
+				entry-latency-us = <814>;
+				exit-latency-us = <4562>;
+				min-residency-us = <9183>;
 				local-timer-stop;
 			};
 
 			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-retention";
+				/* CPU Retention (C2D), L2 Active */
 				arm,psci-suspend-param = <0x00000002>;
 				entry-latency-us = <79>;
 				exit-latency-us = <82>;
-				min-residency-us = <200>;
+				min-residency-us = <1302>;
 			};
 
 			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
 				compatible = "arm,idle-state";
 				idle-state-name = "big-power-collapse";
+				/* CPU + L2 Power Collapse (C3, D4) */
 				arm,psci-suspend-param = <0x40000003>;
-				entry-latency-us = <336>;
-				exit-latency-us = <525>;
-				min-residency-us = <1000>;
+				entry-latency-us = <724>;
+				exit-latency-us = <2027>;
+				min-residency-us = <9419>;
 				local-timer-stop;
 			};
 		};
-- 
2.33.0

[PATCH 5.4 010/100] arm64: dts: qcom: msm8916: Add unit name for /soc node

[Greg Kroah-Hartman]

From: Stephan Gerhold <stephan@gerhold.net>

[ Upstream commit 7a62bfebc8c94bdb6eb8f54f49889dc6b5b79601 ]

This fixes the following warning when building with W=1:
Warning (unit_address_vs_reg): /soc: node has a reg or ranges property,
but no unit name

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210921152120.6710-1-stephan@gerhold.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 449843f2184d8..1063f64f73ca4 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -358,7 +358,7 @@
 		};
 	};
 
-	soc: soc {
+	soc: soc@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
-- 
2.33.0

[PATCH 5.4 011/100] arm64: dts: freescale: fix arm,sp805 compatible string

[Greg Kroah-Hartman]

From: Michael Walle <michael@walle.cc>

[ Upstream commit 99a7cacc66cae92db40139b57689be2af75fc6b8 ]

According to Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
the compatible is:
  compatible = "arm,sp805", "arm,primecell";

The current compatible string doesn't exist at all. Fix it.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 16 ++++++++--------
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 16 ++++++++--------
 2 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 407ebdb35cd2e..6b1b728de9e9c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -637,56 +637,56 @@
 		};
 
 		cluster1_core0_watchdog: wdt@c000000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc000000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster1_core1_watchdog: wdt@c010000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc010000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster1_core2_watchdog: wdt@c020000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc020000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster1_core3_watchdog: wdt@c030000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc030000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster2_core0_watchdog: wdt@c100000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc100000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster2_core1_watchdog: wdt@c110000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc110000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster2_core2_watchdog: wdt@c120000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc120000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster2_core3_watchdog: wdt@c130000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc130000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "wdog_clk", "apb_pclk";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 82f0fe6acbfb7..4bf4a22faa61a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -227,56 +227,56 @@
 		};
 
 		cluster1_core0_watchdog: wdt@c000000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc000000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster1_core1_watchdog: wdt@c010000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc010000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster2_core0_watchdog: wdt@c100000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc100000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster2_core1_watchdog: wdt@c110000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc110000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster3_core0_watchdog: wdt@c200000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc200000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster3_core1_watchdog: wdt@c210000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc210000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster4_core0_watchdog: wdt@c300000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc300000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		cluster4_core1_watchdog: wdt@c310000 {
-			compatible = "arm,sp805-wdt", "arm,primecell";
+			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x0 0xc310000 0x0 0x1000>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "wdog_clk", "apb_pclk";
-- 
2.33.0

[PATCH 5.4 012/100] ASoC: SOF: Intel: hda-dai: fix potential locking issue

[Greg Kroah-Hartman]

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit a20f3b10de61add5e14b6ce4df982f4df2a4cbbc ]

The initial hdac_stream code was adapted a third time with the same
locking issues. Move the spin_lock outside the loops and make sure the
fields are protected on read/write.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210924192417.169243-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/intel/hda-dai.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/sound/soc/sof/intel/hda-dai.c b/sound/soc/sof/intel/hda-dai.c
index 3f645200d3a5c..b3cdd10c83ae1 100644
--- a/sound/soc/sof/intel/hda-dai.c
+++ b/sound/soc/sof/intel/hda-dai.c
@@ -67,6 +67,7 @@ static struct hdac_ext_stream *
 		return NULL;
 	}
 
+	spin_lock_irq(&bus->reg_lock);
 	list_for_each_entry(stream, &bus->stream_list, list) {
 		struct hdac_ext_stream *hstream =
 			stream_to_hdac_ext_stream(stream);
@@ -106,12 +107,12 @@ static struct hdac_ext_stream *
 		 * is updated in snd_hdac_ext_stream_decouple().
 		 */
 		if (!res->decoupled)
-			snd_hdac_ext_stream_decouple(bus, res, true);
-		spin_lock_irq(&bus->reg_lock);
+			snd_hdac_ext_stream_decouple_locked(bus, res, true);
+
 		res->link_locked = 1;
 		res->link_substream = substream;
-		spin_unlock_irq(&bus->reg_lock);
 	}
+	spin_unlock_irq(&bus->reg_lock);
 
 	return res;
 }
-- 
2.33.0

[PATCH 5.4 013/100] clk: imx: imx6ul: Move csi_sel mux to correct base register

[Greg Kroah-Hartman]

From: Stefan Riedmueller <s.riedmueller@phytec.de>

[ Upstream commit 2f9d61869640f732599ec36b984c2b5c46067519 ]

The csi_sel mux register is located in the CCM register base and not the
CCM_ANALOG register base. So move it to the correct position in code.

Otherwise changing the parent of the csi clock can lead to a complete
system failure due to the CCM_ANALOG_PLL_SYS_TOG register being falsely
modified.

Also remove the SET_RATE_PARENT flag since one possible supply for the
csi_sel mux is the system PLL which we don't want to modify.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20210927072857.3940880-1-s.riedmueller@phytec.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/imx/clk-imx6ul.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
index bc931988fe7b2..f3ac5a524f4ed 100644
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -161,7 +161,6 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 	hws[IMX6UL_PLL5_BYPASS] = imx_clk_hw_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
 	hws[IMX6UL_PLL6_BYPASS] = imx_clk_hw_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
 	hws[IMX6UL_PLL7_BYPASS] = imx_clk_hw_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
-	hws[IMX6UL_CLK_CSI_SEL] = imx_clk_hw_mux_flags("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels), CLK_SET_RATE_PARENT);
 
 	/* Do not bypass PLLs initially */
 	clk_set_parent(hws[IMX6UL_PLL1_BYPASS]->clk, hws[IMX6UL_CLK_PLL1]->clk);
@@ -270,6 +269,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 	hws[IMX6UL_CLK_ECSPI_SEL]	  = imx_clk_hw_mux("ecspi_sel",	base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels));
 	hws[IMX6UL_CLK_LCDIF_PRE_SEL]	  = imx_clk_hw_mux_flags("lcdif_pre_sel", base + 0x38, 15, 3, lcdif_pre_sels, ARRAY_SIZE(lcdif_pre_sels), CLK_SET_RATE_PARENT);
 	hws[IMX6UL_CLK_LCDIF_SEL]	  = imx_clk_hw_mux("lcdif_sel",	base + 0x38, 9, 3, lcdif_sels, ARRAY_SIZE(lcdif_sels));
+	hws[IMX6UL_CLK_CSI_SEL]		  = imx_clk_hw_mux("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels));
 
 	hws[IMX6UL_CLK_LDB_DI0_DIV_SEL]  = imx_clk_hw_mux("ldb_di0", base + 0x20, 10, 1, ldb_di0_div_sels, ARRAY_SIZE(ldb_di0_div_sels));
 	hws[IMX6UL_CLK_LDB_DI1_DIV_SEL]  = imx_clk_hw_mux("ldb_di1", base + 0x20, 11, 1, ldb_di1_div_sels, ARRAY_SIZE(ldb_di1_div_sels));
-- 
2.33.0

[PATCH 5.4 014/100] ASoC: nau8824: Add DMI quirk mechanism for active-high jack-detect

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 92d3360108f1839ca40451bad20ff67dd24a1964 ]

Add a quirk mechanism to allow specifying that active-high jack-detection
should be used on platforms where this info is not available in devicetree.

And add an entry for the Cyberbook T116 tablet to the DMI table, so that
jack-detection will work properly on this tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211002211459.110124-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/nau8824.c | 40 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/sound/soc/codecs/nau8824.c b/sound/soc/codecs/nau8824.c
index 15bd8335f6678..c8ccfa2fff848 100644
--- a/sound/soc/codecs/nau8824.c
+++ b/sound/soc/codecs/nau8824.c
@@ -8,6 +8,7 @@
 
 #include <linux/module.h>
 #include <linux/delay.h>
+#include <linux/dmi.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/regmap.h>
@@ -27,6 +28,12 @@
 
 #include "nau8824.h"
 
+#define NAU8824_JD_ACTIVE_HIGH			BIT(0)
+
+static int nau8824_quirk;
+static int quirk_override = -1;
+module_param_named(quirk, quirk_override, uint, 0444);
+MODULE_PARM_DESC(quirk, "Board-specific quirk override");
 
 static int nau8824_config_sysclk(struct nau8824 *nau8824,
 	int clk_id, unsigned int freq);
@@ -1875,6 +1882,34 @@ static int nau8824_read_device_properties(struct device *dev,
 	return 0;
 }
 
+/* Please keep this list alphabetically sorted */
+static const struct dmi_system_id nau8824_quirk_table[] = {
+	{
+		/* Cyberbook T116 rugged tablet */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Default string"),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "20170531"),
+		},
+		.driver_data = (void *)(NAU8824_JD_ACTIVE_HIGH),
+	},
+	{}
+};
+
+static void nau8824_check_quirks(void)
+{
+	const struct dmi_system_id *dmi_id;
+
+	if (quirk_override != -1) {
+		nau8824_quirk = quirk_override;
+		return;
+	}
+
+	dmi_id = dmi_first_match(nau8824_quirk_table);
+	if (dmi_id)
+		nau8824_quirk = (unsigned long)dmi_id->driver_data;
+}
+
 static int nau8824_i2c_probe(struct i2c_client *i2c,
 	const struct i2c_device_id *id)
 {
@@ -1899,6 +1934,11 @@ static int nau8824_i2c_probe(struct i2c_client *i2c,
 	nau8824->irq = i2c->irq;
 	sema_init(&nau8824->jd_sem, 1);
 
+	nau8824_check_quirks();
+
+	if (nau8824_quirk & NAU8824_JD_ACTIVE_HIGH)
+		nau8824->jkdet_polarity = 0;
+
 	nau8824_print_device_properties(nau8824);
 
 	ret = regmap_read(nau8824->regmap, NAU8824_REG_I2C_DEVICE_ID, &value);
-- 
2.33.0

[PATCH 5.4 015/100] scsi: advansys: Fix kernel pointer leak

[Greg Kroah-Hartman]

From: Guo Zhi <qtxuning1999@sjtu.edu.cn>

[ Upstream commit d4996c6eac4c81b8872043e9391563f67f13e406 ]

Pointers should be printed with %p or %px rather than cast to 'unsigned
long' and printed with %lx.

Change %lx to %p to print the hashed pointer.

Link: https://lore.kernel.org/r/20210929122538.1158235-1-qtxuning1999@sjtu.edu.cn
Signed-off-by: Guo Zhi <qtxuning1999@sjtu.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/advansys.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index a242a62caaa16..7b3e52ff5f516 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -3366,8 +3366,8 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
 		   shost->host_no);
 
 	seq_printf(m,
-		   " iop_base 0x%lx, cable_detect: %X, err_code %u\n",
-		   (unsigned long)v->iop_base,
+		   " iop_base 0x%p, cable_detect: %X, err_code %u\n",
+		   v->iop_base,
 		   AdvReadWordRegister(iop_base,IOPW_SCSI_CFG1) & CABLE_DETECT,
 		   v->err_code);
 
-- 
2.33.0

[PATCH 5.4 016/100] firmware_loader: fix pre-allocated buf built-in firmware use

[Greg Kroah-Hartman]

From: Luis Chamberlain <mcgrof@kernel.org>

[ Upstream commit f7a07f7b96033df7709042ff38e998720a3f7119 ]

The firmware_loader can be used with a pre-allocated buffer
through the use of the API calls:

  o request_firmware_into_buf()
  o request_partial_firmware_into_buf()

If the firmware was built-in and present, our current check
for if the built-in firmware fits into the pre-allocated buffer
does not return any errors, and we proceed to tell the caller
that everything worked fine. It's a lie and no firmware would
end up being copied into the pre-allocated buffer. So if the
caller trust the result it may end up writing a bunch of 0's
to a device!

Fix this by making the function that checks for the pre-allocated
buffer return non-void. Since the typical use case is when no
pre-allocated buffer is provided make this return successfully
for that case. If the built-in firmware does *not* fit into the
pre-allocated buffer size return a failure as we should have
been doing before.

I'm not aware of users of the built-in firmware using the API
calls with a pre-allocated buffer, as such I doubt this fixes
any real life issue. But you never know... perhaps some oddball
private tree might use it.

In so far as upstream is concerned this just fixes our code for
correctness.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210917182226.3532898-2-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/firmware_loader/main.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/base/firmware_loader/main.c b/drivers/base/firmware_loader/main.c
index 249349f64bfe9..4f6b76bd957ef 100644
--- a/drivers/base/firmware_loader/main.c
+++ b/drivers/base/firmware_loader/main.c
@@ -98,12 +98,15 @@ static struct firmware_cache fw_cache;
 extern struct builtin_fw __start_builtin_fw[];
 extern struct builtin_fw __end_builtin_fw[];
 
-static void fw_copy_to_prealloc_buf(struct firmware *fw,
+static bool fw_copy_to_prealloc_buf(struct firmware *fw,
 				    void *buf, size_t size)
 {
-	if (!buf || size < fw->size)
-		return;
+	if (!buf)
+		return true;
+	if (size < fw->size)
+		return false;
 	memcpy(buf, fw->data, fw->size);
+	return true;
 }
 
 static bool fw_get_builtin_firmware(struct firmware *fw, const char *name,
@@ -115,9 +118,7 @@ static bool fw_get_builtin_firmware(struct firmware *fw, const char *name,
 		if (strcmp(name, b_fw->name) == 0) {
 			fw->size = b_fw->size;
 			fw->data = b_fw->data;
-			fw_copy_to_prealloc_buf(fw, buf, size);
-
-			return true;
+			return fw_copy_to_prealloc_buf(fw, buf, size);
 		}
 	}
 
-- 
2.33.0

[PATCH 5.4 017/100] ARM: dts: omap: fix gpmc,mux-add-data type

[Greg Kroah-Hartman]

From: Roger Quadros <rogerq@kernel.org>

[ Upstream commit 51b9e22ffd3c4c56cbb7caae9750f70e55ffa603 ]

gpmc,mux-add-data is not boolean.

Fixes the below errors flagged by dtbs_check.

"ethernet@4,0:gpmc,mux-add-data: True is not of type 'array'"

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi         | 2 +-
 arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
index 7f6aefd134514..e7534fe9c53cf 100644
--- a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
+++ b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
@@ -29,7 +29,7 @@
 		compatible = "smsc,lan9221","smsc,lan9115";
 		bank-width = <2>;
 
-		gpmc,mux-add-data;
+		gpmc,mux-add-data = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <42>;
 		gpmc,cs-wr-off-ns = <36>;
diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
index e5da3bc6f1050..218a10c0d8159 100644
--- a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
@@ -22,7 +22,7 @@
 		compatible = "smsc,lan9221","smsc,lan9115";
 		bank-width = <2>;
 
-		gpmc,mux-add-data;
+		gpmc,mux-add-data = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <42>;
 		gpmc,cs-wr-off-ns = <36>;
-- 
2.33.0

[PATCH 5.4 018/100] usb: host: ohci-tmio: check return value after calling platform_get_resource()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 9eff2b2e59fda25051ab36cd1cb5014661df657b ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211011134920.118477-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/ohci-tmio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
index fed43c6dd85cc..b611c8b09a89f 100644
--- a/drivers/usb/host/ohci-tmio.c
+++ b/drivers/usb/host/ohci-tmio.c
@@ -199,7 +199,7 @@ static int ohci_hcd_tmio_drv_probe(struct platform_device *dev)
 	if (usb_disabled())
 		return -ENODEV;
 
-	if (!cell)
+	if (!cell || !regs || !config || !sram)
 		return -EINVAL;
 
 	if (irq < 0)
-- 
2.33.0

[PATCH 5.4 019/100] ARM: dts: ls1021a: move thermal-zones node out of soc/

[Greg Kroah-Hartman]

From: Li Yang <leoyang.li@nxp.com>

[ Upstream commit 1ee1500ef717eefb5d9bdaf97905cb81b4e69aa4 ]

This fixes dtbs-check error from simple-bus schema:
soc: thermal-zones: {'type': 'object'} is not allowed for {'cpu-thermal': ..... }
        From schema: /home/leo/.local/lib/python3.8/site-packages/dtschema/schemas/simple-bus.yaml

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ls1021a.dtsi | 66 +++++++++++++++++-----------------
 1 file changed, 33 insertions(+), 33 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index c62fcca7b4263..aeb8a40b6b601 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -311,39 +311,6 @@
 			#thermal-sensor-cells = <1>;
 		};
 
-		thermal-zones {
-			cpu_thermal: cpu-thermal {
-				polling-delay-passive = <1000>;
-				polling-delay = <5000>;
-
-				thermal-sensors = <&tmu 0>;
-
-				trips {
-					cpu_alert: cpu-alert {
-						temperature = <85000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-					cpu_crit: cpu-crit {
-						temperature = <95000>;
-						hysteresis = <2000>;
-						type = "critical";
-					};
-				};
-
-				cooling-maps {
-					map0 {
-						trip = <&cpu_alert>;
-						cooling-device =
-							<&cpu0 THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-							<&cpu1 THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>;
-					};
-				};
-			};
-		};
-
 		dspi0: spi@2100000 {
 			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
@@ -984,4 +951,37 @@
 		};
 
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
 };
-- 
2.33.0

[PATCH 5.4 020/100] ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flash

[Greg Kroah-Hartman]

From: Li Yang <leoyang.li@nxp.com>

[ Upstream commit 05e63b48b20fa70726be505a7660d1a07bc1cffb ]

We cannot list all the possible chips used in different board revisions,
just use the generic "jedec,spi-nor" compatible instead.  This also
fixes dtbs_check error:
['jedec,spi-nor', 's25fl256s1', 's25fl512s'] is too long

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ls1021a-tsn.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts
index 5b7689094b70e..7235ce2a32936 100644
--- a/arch/arm/boot/dts/ls1021a-tsn.dts
+++ b/arch/arm/boot/dts/ls1021a-tsn.dts
@@ -247,7 +247,7 @@
 
 	flash@0 {
 		/* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */
-		compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s";
+		compatible = "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-- 
2.33.0

[PATCH 5.4 021/100] ALSA: ISA: not for M68K

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 3c05f1477e62ea5a0a8797ba6a545b1dc751fb31 ]

On m68k, compiling drivers under SND_ISA causes build errors:

../sound/core/isadma.c: In function 'snd_dma_program':
../sound/core/isadma.c:33:17: error: implicit declaration of function 'claim_dma_lock' [-Werror=implicit-function-declaration]
   33 |         flags = claim_dma_lock();
      |                 ^~~~~~~~~~~~~~
../sound/core/isadma.c:41:9: error: implicit declaration of function 'release_dma_lock' [-Werror=implicit-function-declaration]
   41 |         release_dma_lock(flags);
      |         ^~~~~~~~~~~~~~~~

../sound/isa/sb/sb16_main.c: In function 'snd_sb16_playback_prepare':
../sound/isa/sb/sb16_main.c:253:72: error: 'DMA_AUTOINIT' undeclared (first use in this function)
  253 |         snd_dma_program(dma, runtime->dma_addr, size, DMA_MODE_WRITE | DMA_AUTOINIT);
      |                                                                        ^~~~~~~~~~~~
../sound/isa/sb/sb16_main.c:253:72: note: each undeclared identifier is reported only once for each function it appears in
../sound/isa/sb/sb16_main.c: In function 'snd_sb16_capture_prepare':
../sound/isa/sb/sb16_main.c:322:71: error: 'DMA_AUTOINIT' undeclared (first use in this function)
  322 |         snd_dma_program(dma, runtime->dma_addr, size, DMA_MODE_READ | DMA_AUTOINIT);
      |                                                                       ^~~~~~~~~~~~

and more...

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20211016062602.3588-1-rdunlap@infradead.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/Makefile | 2 ++
 sound/isa/Kconfig   | 2 +-
 sound/pci/Kconfig   | 1 +
 3 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/sound/core/Makefile b/sound/core/Makefile
index ee4a4a6b99ba7..d123587c0fd8f 100644
--- a/sound/core/Makefile
+++ b/sound/core/Makefile
@@ -9,7 +9,9 @@ ifneq ($(CONFIG_SND_PROC_FS),)
 snd-y += info.o
 snd-$(CONFIG_SND_OSSEMUL) += info_oss.o
 endif
+ifneq ($(CONFIG_M68K),y)
 snd-$(CONFIG_ISA_DMA_API) += isadma.o
+endif
 snd-$(CONFIG_SND_OSSEMUL) += sound_oss.o
 snd-$(CONFIG_SND_VMASTER) += vmaster.o
 snd-$(CONFIG_SND_JACK)	  += ctljack.o jack.o
diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig
index b690ed937cbe8..df2e45c8814e9 100644
--- a/sound/isa/Kconfig
+++ b/sound/isa/Kconfig
@@ -22,7 +22,7 @@ config SND_SB16_DSP
 menuconfig SND_ISA
 	bool "ISA sound devices"
 	depends on ISA || COMPILE_TEST
-	depends on ISA_DMA_API
+	depends on ISA_DMA_API && !M68K
 	default y
 	help
 	  Support for sound devices connected via the ISA bus.
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 7630f808d087c..6edde2f145025 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -279,6 +279,7 @@ config SND_CS46XX_NEW_DSP
 config SND_CS5530
 	tristate "CS5530 Audio"
 	depends on ISA_DMA_API && (X86_32 || COMPILE_TEST)
+	depends on !M68K
 	select SND_SB16_DSP
 	help
 	  Say Y here to include support for audio on Cyrix/NatSemi CS5530 chips.
-- 
2.33.0

[PATCH 5.4 022/100] tty: tty_buffer: Fix the softlockup issue in flush_to_ldisc

[Greg Kroah-Hartman]

From: Guanghui Feng <guanghuifeng@linux.alibaba.com>

[ Upstream commit 3968ddcf05fb4b9409cd1859feb06a5b0550a1c1 ]

When running ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
which look like this one:

  Workqueue: events_unbound flush_to_ldisc
  Call trace:
   dump_backtrace+0x0/0x1ec
   show_stack+0x24/0x30
   dump_stack+0xd0/0x128
   panic+0x15c/0x374
   watchdog_timer_fn+0x2b8/0x304
   __run_hrtimer+0x88/0x2c0
   __hrtimer_run_queues+0xa4/0x120
   hrtimer_interrupt+0xfc/0x270
   arch_timer_handler_phys+0x40/0x50
   handle_percpu_devid_irq+0x94/0x220
   __handle_domain_irq+0x88/0xf0
   gic_handle_irq+0x84/0xfc
   el1_irq+0xc8/0x180
   slip_unesc+0x80/0x214 [slip]
   tty_ldisc_receive_buf+0x64/0x80
   tty_port_default_receive_buf+0x50/0x90
   flush_to_ldisc+0xbc/0x110
   process_one_work+0x1d4/0x4b0
   worker_thread+0x180/0x430
   kthread+0x11c/0x120

In the testcase pty04, The first process call the write syscall to send
data to the pty master. At the same time, the workqueue will do the
flush_to_ldisc to pop data in a loop until there is no more data left.
When the sender and workqueue running in different core, the sender sends
data fastly in full time which will result in workqueue doing work in loop
for a long time and occuring softlockup in flush_to_ldisc with kernel
configured without preempt. So I add need_resched check and cond_resched
in the flush_to_ldisc loop to avoid it.

Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com>
Link: https://lore.kernel.org/r/1633961304-24759-1-git-send-email-guanghuifeng@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/tty_buffer.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index ec145a59f1993..bb148dbfbb88f 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -534,6 +534,9 @@ static void flush_to_ldisc(struct work_struct *work)
 		if (!count)
 			break;
 		head->read += count;
+
+		if (need_resched())
+			cond_resched();
 	}
 
 	mutex_unlock(&buf->lock);
-- 
2.33.0

[PATCH 5.4 023/100] MIPS: sni: Fix the build

[Greg Kroah-Hartman]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit c91cf42f61dc77b289784ea7b15a8531defa41c0 ]

This patch fixes the following gcc 10 build error:

arch/mips/sni/time.c: In function ‘a20r_set_periodic’:
arch/mips/sni/time.c:15:26: error: unsigned conversion from ‘int’ to ‘u8’ {aka ‘volatile unsigned char’} changes value from ‘576’ to ‘64’ [-Werror=overflow]
   15 | #define SNI_COUNTER0_DIV ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ)
      |                          ^
arch/mips/sni/time.c:21:45: note: in expansion of macro ‘SNI_COUNTER0_DIV’
   21 |  *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV;
      |                                             ^~~~~~~~~~~~~~~~

Cc: linux-mips@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/sni/time.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c
index dbace1f3e1a97..745ceb945fc50 100644
--- a/arch/mips/sni/time.c
+++ b/arch/mips/sni/time.c
@@ -18,14 +18,14 @@ static int a20r_set_periodic(struct clock_event_device *evt)
 {
 	*(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0x34;
 	wmb();
-	*(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV;
+	*(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV & 0xff;
 	wmb();
 	*(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV >> 8;
 	wmb();
 
 	*(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0xb4;
 	wmb();
-	*(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV;
+	*(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV & 0xff;
 	wmb();
 	*(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV >> 8;
 	wmb();
-- 
2.33.0

[PATCH 5.4 024/100] scsi: target: Fix ordered tag handling

[Greg Kroah-Hartman]

From: Mike Christie <michael.christie@oracle.com>

[ Upstream commit ed1227e080990ffec5bf39006ec8a57358e6689a ]

This patch fixes the following bugs:

1. If there are multiple ordered cmds queued and multiple simple cmds
   completing, target_restart_delayed_cmds() could be called on different
   CPUs and each instance could start a ordered cmd. They could then run in
   different orders than they were queued.

2. target_restart_delayed_cmds() and target_handle_task_attr() can race
   where:

   1. target_handle_task_attr() has passed the simple_cmds == 0 check.

   2. transport_complete_task_attr() then decrements simple_cmds to 0.

   3. transport_complete_task_attr() runs target_restart_delayed_cmds() and
      it does not see any cmds on the delayed_cmd_list.

   4. target_handle_task_attr() adds the cmd to the delayed_cmd_list.

   The cmd will then end up timing out.

3. If we are sent > 1 ordered cmds and simple_cmds == 0, we can execute
   them out of order, because target_handle_task_attr() will hit that
   simple_cmds check first and return false for all ordered cmds sent.

4. We run target_restart_delayed_cmds() after every cmd completion, so if
   there is more than 1 simple cmd running, we start executing ordered cmds
   after that first cmd instead of waiting for all of them to complete.

5. Ordered cmds are not supposed to start until HEAD OF QUEUE and all older
   cmds have completed, and not just simple.

6. It's not a bug but it doesn't make sense to take the delayed_cmd_lock
   for every cmd completion when ordered cmds are almost never used. Just
   replacing that lock with an atomic increases IOPs by up to 10% when
   completions are spread over multiple CPUs and there are multiple
   sessions/ mqs/thread accessing the same device.

This patch moves the queued delayed handling to a per device work to
serialze the cmd executions for each device and adds a new counter to track
HEAD_OF_QUEUE and SIMPLE cmds. We can then check the new counter to
determine when to run the work on the completion path.

Link: https://lore.kernel.org/r/20210930020422.92578-3-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_device.c    |  2 +
 drivers/target/target_core_internal.h  |  1 +
 drivers/target/target_core_transport.c | 76 ++++++++++++++++++--------
 include/target/target_core_base.h      |  6 +-
 4 files changed, 61 insertions(+), 24 deletions(-)

diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index 2d19f0e332b01..20fe287039857 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -758,6 +758,8 @@ struct se_device *target_alloc_device(struct se_hba *hba, const char *name)
 	INIT_LIST_HEAD(&dev->t10_alua.lba_map_list);
 	spin_lock_init(&dev->t10_alua.lba_map_lock);
 
+	INIT_WORK(&dev->delayed_cmd_work, target_do_delayed_work);
+
 	dev->t10_wwn.t10_dev = dev;
 	dev->t10_alua.t10_dev = dev;
 
diff --git a/drivers/target/target_core_internal.h b/drivers/target/target_core_internal.h
index e7b3c6e5d5744..e4f072a680d41 100644
--- a/drivers/target/target_core_internal.h
+++ b/drivers/target/target_core_internal.h
@@ -150,6 +150,7 @@ int	transport_dump_vpd_ident(struct t10_vpd *, unsigned char *, int);
 void	transport_clear_lun_ref(struct se_lun *);
 sense_reason_t	target_cmd_size_check(struct se_cmd *cmd, unsigned int size);
 void	target_qf_do_work(struct work_struct *work);
+void	target_do_delayed_work(struct work_struct *work);
 bool	target_check_wce(struct se_device *dev);
 bool	target_check_fua(struct se_device *dev);
 void	__target_execute_cmd(struct se_cmd *, bool);
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 5cf9e7677926f..f52fe40002259 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -2021,32 +2021,35 @@ static bool target_handle_task_attr(struct se_cmd *cmd)
 	 */
 	switch (cmd->sam_task_attr) {
 	case TCM_HEAD_TAG:
+		atomic_inc_mb(&dev->non_ordered);
 		pr_debug("Added HEAD_OF_QUEUE for CDB: 0x%02x\n",
 			 cmd->t_task_cdb[0]);
 		return false;
 	case TCM_ORDERED_TAG:
-		atomic_inc_mb(&dev->dev_ordered_sync);
+		atomic_inc_mb(&dev->delayed_cmd_count);
 
 		pr_debug("Added ORDERED for CDB: 0x%02x to ordered list\n",
 			 cmd->t_task_cdb[0]);
-
-		/*
-		 * Execute an ORDERED command if no other older commands
-		 * exist that need to be completed first.
-		 */
-		if (!atomic_read(&dev->simple_cmds))
-			return false;
 		break;
 	default:
 		/*
 		 * For SIMPLE and UNTAGGED Task Attribute commands
 		 */
-		atomic_inc_mb(&dev->simple_cmds);
+		atomic_inc_mb(&dev->non_ordered);
+
+		if (atomic_read(&dev->delayed_cmd_count) == 0)
+			return false;
 		break;
 	}
 
-	if (atomic_read(&dev->dev_ordered_sync) == 0)
-		return false;
+	if (cmd->sam_task_attr != TCM_ORDERED_TAG) {
+		atomic_inc_mb(&dev->delayed_cmd_count);
+		/*
+		 * We will account for this when we dequeue from the delayed
+		 * list.
+		 */
+		atomic_dec_mb(&dev->non_ordered);
+	}
 
 	spin_lock(&dev->delayed_cmd_lock);
 	list_add_tail(&cmd->se_delayed_node, &dev->delayed_cmd_list);
@@ -2054,6 +2057,12 @@ static bool target_handle_task_attr(struct se_cmd *cmd)
 
 	pr_debug("Added CDB: 0x%02x Task Attr: 0x%02x to delayed CMD listn",
 		cmd->t_task_cdb[0], cmd->sam_task_attr);
+	/*
+	 * We may have no non ordered cmds when this function started or we
+	 * could have raced with the last simple/head cmd completing, so kick
+	 * the delayed handler here.
+	 */
+	schedule_work(&dev->delayed_cmd_work);
 	return true;
 }
 
@@ -2091,29 +2100,48 @@ EXPORT_SYMBOL(target_execute_cmd);
  * Process all commands up to the last received ORDERED task attribute which
  * requires another blocking boundary
  */
-static void target_restart_delayed_cmds(struct se_device *dev)
+void target_do_delayed_work(struct work_struct *work)
 {
-	for (;;) {
+	struct se_device *dev = container_of(work, struct se_device,
+					     delayed_cmd_work);
+
+	spin_lock(&dev->delayed_cmd_lock);
+	while (!dev->ordered_sync_in_progress) {
 		struct se_cmd *cmd;
 
-		spin_lock(&dev->delayed_cmd_lock);
-		if (list_empty(&dev->delayed_cmd_list)) {
-			spin_unlock(&dev->delayed_cmd_lock);
+		if (list_empty(&dev->delayed_cmd_list))
 			break;
-		}
 
 		cmd = list_entry(dev->delayed_cmd_list.next,
 				 struct se_cmd, se_delayed_node);
+
+		if (cmd->sam_task_attr == TCM_ORDERED_TAG) {
+			/*
+			 * Check if we started with:
+			 * [ordered] [simple] [ordered]
+			 * and we are now at the last ordered so we have to wait
+			 * for the simple cmd.
+			 */
+			if (atomic_read(&dev->non_ordered) > 0)
+				break;
+
+			dev->ordered_sync_in_progress = true;
+		}
+
 		list_del(&cmd->se_delayed_node);
+		atomic_dec_mb(&dev->delayed_cmd_count);
 		spin_unlock(&dev->delayed_cmd_lock);
 
+		if (cmd->sam_task_attr != TCM_ORDERED_TAG)
+			atomic_inc_mb(&dev->non_ordered);
+
 		cmd->transport_state |= CMD_T_SENT;
 
 		__target_execute_cmd(cmd, true);
 
-		if (cmd->sam_task_attr == TCM_ORDERED_TAG)
-			break;
+		spin_lock(&dev->delayed_cmd_lock);
 	}
+	spin_unlock(&dev->delayed_cmd_lock);
 }
 
 /*
@@ -2131,14 +2159,17 @@ static void transport_complete_task_attr(struct se_cmd *cmd)
 		goto restart;
 
 	if (cmd->sam_task_attr == TCM_SIMPLE_TAG) {
-		atomic_dec_mb(&dev->simple_cmds);
+		atomic_dec_mb(&dev->non_ordered);
 		dev->dev_cur_ordered_id++;
 	} else if (cmd->sam_task_attr == TCM_HEAD_TAG) {
+		atomic_dec_mb(&dev->non_ordered);
 		dev->dev_cur_ordered_id++;
 		pr_debug("Incremented dev_cur_ordered_id: %u for HEAD_OF_QUEUE\n",
 			 dev->dev_cur_ordered_id);
 	} else if (cmd->sam_task_attr == TCM_ORDERED_TAG) {
-		atomic_dec_mb(&dev->dev_ordered_sync);
+		spin_lock(&dev->delayed_cmd_lock);
+		dev->ordered_sync_in_progress = false;
+		spin_unlock(&dev->delayed_cmd_lock);
 
 		dev->dev_cur_ordered_id++;
 		pr_debug("Incremented dev_cur_ordered_id: %u for ORDERED\n",
@@ -2147,7 +2178,8 @@ static void transport_complete_task_attr(struct se_cmd *cmd)
 	cmd->se_cmd_flags &= ~SCF_TASK_ATTR_SET;
 
 restart:
-	target_restart_delayed_cmds(dev);
+	if (atomic_read(&dev->delayed_cmd_count) > 0)
+		schedule_work(&dev->delayed_cmd_work);
 }
 
 static void transport_complete_qf(struct se_cmd *cmd)
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index 7c9716fe731e2..59d7ebb8bbaf4 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -781,8 +781,9 @@ struct se_device {
 	atomic_long_t		read_bytes;
 	atomic_long_t		write_bytes;
 	/* Active commands on this virtual SE device */
-	atomic_t		simple_cmds;
-	atomic_t		dev_ordered_sync;
+	atomic_t		non_ordered;
+	bool			ordered_sync_in_progress;
+	atomic_t		delayed_cmd_count;
 	atomic_t		dev_qf_count;
 	u32			export_count;
 	spinlock_t		delayed_cmd_lock;
@@ -804,6 +805,7 @@ struct se_device {
 	struct list_head	dev_sep_list;
 	struct list_head	dev_tmr_list;
 	struct work_struct	qf_work_queue;
+	struct work_struct	delayed_cmd_work;
 	struct list_head	delayed_cmd_list;
 	struct list_head	state_list;
 	struct list_head	qf_cmd_list;
-- 
2.33.0

[PATCH 5.4 025/100] scsi: target: Fix alua_tg_pt_gps_count tracking

[Greg Kroah-Hartman]

From: Mike Christie <michael.christie@oracle.com>

[ Upstream commit 1283c0d1a32bb924324481586b5d6e8e76f676ba ]

We can't free the tg_pt_gp in core_alua_set_tg_pt_gp_id() because it's
still accessed via configfs. Its release must go through the normal
configfs/refcount process.

The max alua_tg_pt_gps_count check should probably have been done in
core_alua_allocate_tg_pt_gp(), but with the current code userspace could
have created 0x0000ffff + 1 groups, but only set the id for 0x0000ffff.
Then it could have deleted a group with an ID set, and then set the ID for
that extra group and it would work ok.

It's unlikely, but just in case this patch continues to allow that type of
behavior, and just fixes the kfree() while in use bug.

Link: https://lore.kernel.org/r/20210930020422.92578-4-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_alua.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index 385e4cf9cfa63..0fc3135d3e4f6 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -1702,7 +1702,6 @@ int core_alua_set_tg_pt_gp_id(
 		pr_err("Maximum ALUA alua_tg_pt_gps_count:"
 			" 0x0000ffff reached\n");
 		spin_unlock(&dev->t10_alua.tg_pt_gps_lock);
-		kmem_cache_free(t10_alua_tg_pt_gp_cache, tg_pt_gp);
 		return -ENOSPC;
 	}
 again:
-- 
2.33.0

[PATCH 5.4 026/100] iio: imu: st_lsm6dsx: Avoid potential array overflow in st_lsm6dsx_set_odr()

[Greg Kroah-Hartman]

From: Teng Qi <starmiku1207184332@gmail.com>

[ Upstream commit 94be878c882d8d784ff44c639bf55f3b029f85af ]

The length of hw->settings->odr_table is 2 and ref_sensor->id is an enum
variable whose value is between 0 and 5.
However, the value ST_LSM6DSX_ID_MAX (i.e. 5) is not caught properly in
 switch (sensor->id) {

If ref_sensor->id is ST_LSM6DSX_ID_MAX, an array overflow will ocurrs in
function st_lsm6dsx_check_odr():
  odr_table = &sensor->hw->settings->odr_table[sensor->id];

and in function st_lsm6dsx_set_odr():
  reg = &hw->settings->odr_table[ref_sensor->id].reg;

To avoid this array overflow, handle ST_LSM6DSX_ID_GYRO explicitly and
return -EINVAL for the default case.

The enum value ST_LSM6DSX_ID_MAX is only present as an easy way to check
the limit and as such is never used, however this is not locally obvious.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Teng Qi <starmiku1207184332@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/20211011114003.976221-1-starmiku1207184332@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 057a4b0100106..8850da8e25d69 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -1015,6 +1015,8 @@ static int st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u16 req_odr)
 	int err;
 
 	switch (sensor->id) {
+	case ST_LSM6DSX_ID_GYRO:
+		break;
 	case ST_LSM6DSX_ID_EXT0:
 	case ST_LSM6DSX_ID_EXT1:
 	case ST_LSM6DSX_ID_EXT2:
@@ -1040,8 +1042,8 @@ static int st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u16 req_odr)
 		}
 		break;
 	}
-	default:
-		break;
+	default: /* should never occur */
+		return -EINVAL;
 	}
 
 	if (req_odr > 0) {
-- 
2.33.0

[PATCH 5.4 027/100] powerpc/5200: dts: fix memory node unit name

[Greg Kroah-Hartman]

From: Anatolij Gustschin <agust@denx.de>

[ Upstream commit aed2886a5e9ffc8269a4220bff1e9e030d3d2eb1 ]

Fixes build warnings:
Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211013220532.24759-4-agust@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/boot/dts/charon.dts    | 2 +-
 arch/powerpc/boot/dts/digsy_mtc.dts | 2 +-
 arch/powerpc/boot/dts/lite5200.dts  | 2 +-
 arch/powerpc/boot/dts/lite5200b.dts | 2 +-
 arch/powerpc/boot/dts/media5200.dts | 2 +-
 arch/powerpc/boot/dts/mpc5200b.dtsi | 2 +-
 arch/powerpc/boot/dts/o2d.dts       | 2 +-
 arch/powerpc/boot/dts/o2d.dtsi      | 2 +-
 arch/powerpc/boot/dts/o2dnt2.dts    | 2 +-
 arch/powerpc/boot/dts/o3dnt.dts     | 2 +-
 arch/powerpc/boot/dts/pcm032.dts    | 2 +-
 arch/powerpc/boot/dts/tqm5200.dts   | 2 +-
 12 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/powerpc/boot/dts/charon.dts b/arch/powerpc/boot/dts/charon.dts
index 408b486b13dff..cd589539f313f 100644
--- a/arch/powerpc/boot/dts/charon.dts
+++ b/arch/powerpc/boot/dts/charon.dts
@@ -35,7 +35,7 @@
 		};
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;	// 128MB
 	};
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
index 0e5e9d3acf79f..19a14e62e65f4 100644
--- a/arch/powerpc/boot/dts/digsy_mtc.dts
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -16,7 +16,7 @@
 	model = "intercontrol,digsy-mtc";
 	compatible = "intercontrol,digsy-mtc";
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x02000000>;	// 32MB
 	};
 
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index cb2782dd6132c..e7b194775d783 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -32,7 +32,7 @@
 		};
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x04000000>;	// 64MB
 	};
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index 2b86c81f90485..547cbe726ff23 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -31,7 +31,7 @@
 		led4 { gpios = <&gpio_simple 2 1>; };
 	};
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x10000000>;	// 256MB
 	};
 
diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
index 61cae9dcddef4..f3188018faceb 100644
--- a/arch/powerpc/boot/dts/media5200.dts
+++ b/arch/powerpc/boot/dts/media5200.dts
@@ -32,7 +32,7 @@
 		};
 	};
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x08000000>;	// 128MB RAM
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc5200b.dtsi b/arch/powerpc/boot/dts/mpc5200b.dtsi
index 648fe31795f49..8b796f3b11da7 100644
--- a/arch/powerpc/boot/dts/mpc5200b.dtsi
+++ b/arch/powerpc/boot/dts/mpc5200b.dtsi
@@ -33,7 +33,7 @@
 		};
 	};
 
-	memory: memory {
+	memory: memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x04000000>;	// 64MB
 	};
diff --git a/arch/powerpc/boot/dts/o2d.dts b/arch/powerpc/boot/dts/o2d.dts
index 24a46f65e5299..e0a8d3034417f 100644
--- a/arch/powerpc/boot/dts/o2d.dts
+++ b/arch/powerpc/boot/dts/o2d.dts
@@ -12,7 +12,7 @@
 	model = "ifm,o2d";
 	compatible = "ifm,o2d";
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x08000000>;  // 128MB
 	};
 
diff --git a/arch/powerpc/boot/dts/o2d.dtsi b/arch/powerpc/boot/dts/o2d.dtsi
index 6661955a2be47..b55a9e5bd828c 100644
--- a/arch/powerpc/boot/dts/o2d.dtsi
+++ b/arch/powerpc/boot/dts/o2d.dtsi
@@ -19,7 +19,7 @@
 	model = "ifm,o2d";
 	compatible = "ifm,o2d";
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x04000000>;	// 64MB
 	};
 
diff --git a/arch/powerpc/boot/dts/o2dnt2.dts b/arch/powerpc/boot/dts/o2dnt2.dts
index eeba7f5507d5d..c2eedbd1f5fcb 100644
--- a/arch/powerpc/boot/dts/o2dnt2.dts
+++ b/arch/powerpc/boot/dts/o2dnt2.dts
@@ -12,7 +12,7 @@
 	model = "ifm,o2dnt2";
 	compatible = "ifm,o2d";
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x08000000>;  // 128MB
 	};
 
diff --git a/arch/powerpc/boot/dts/o3dnt.dts b/arch/powerpc/boot/dts/o3dnt.dts
index fd00396b0593e..e4c1bdd412716 100644
--- a/arch/powerpc/boot/dts/o3dnt.dts
+++ b/arch/powerpc/boot/dts/o3dnt.dts
@@ -12,7 +12,7 @@
 	model = "ifm,o3dnt";
 	compatible = "ifm,o2d";
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x04000000>;  // 64MB
 	};
 
diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
index c259c6b3ac5ab..5674f978b9830 100644
--- a/arch/powerpc/boot/dts/pcm032.dts
+++ b/arch/powerpc/boot/dts/pcm032.dts
@@ -22,7 +22,7 @@
 	model = "phytec,pcm032";
 	compatible = "phytec,pcm032";
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x08000000>;	// 128MB
 	};
 
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
index 9ed0bc78967e1..5bb25a9e40a01 100644
--- a/arch/powerpc/boot/dts/tqm5200.dts
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -32,7 +32,7 @@
 		};
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x04000000>;	// 64MB
 	};
-- 
2.33.0

[PATCH 5.4 028/100] ALSA: gus: fix null pointer dereference on pointer block

[Greg Kroah-Hartman]

From: Chengfeng Ye <cyeaa@connect.ust.hk>

[ Upstream commit a0d21bb3279476c777434c40d969ea88ca64f9aa ]

The pointer block return from snd_gf1_dma_next_block could be
null, so there is a potential null pointer dereference issue.
Fix this by adding a null check before dereference.

Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Link: https://lore.kernel.org/r/20211024104611.9919-1-cyeaa@connect.ust.hk
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/isa/gus/gus_dma.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/isa/gus/gus_dma.c b/sound/isa/gus/gus_dma.c
index a1c770d826dda..6d664dd8dde0b 100644
--- a/sound/isa/gus/gus_dma.c
+++ b/sound/isa/gus/gus_dma.c
@@ -126,6 +126,8 @@ static void snd_gf1_dma_interrupt(struct snd_gus_card * gus)
 	}
 	block = snd_gf1_dma_next_block(gus);
 	spin_unlock(&gus->dma_lock);
+	if (!block)
+		return;
 	snd_gf1_dma_program(gus, block->addr, block->buf_addr, block->count, (unsigned short) block->cmd);
 	kfree(block);
 #if 0
-- 
2.33.0

[PATCH 5.4 029/100] powerpc/dcr: Use cmplwi instead of 3-argument cmpli

[Greg Kroah-Hartman]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit fef071be57dc43679a32d5b0e6ee176d6f12e9f2 ]

In dcr-low.S we use cmpli with three arguments, instead of four
arguments as defined in the ISA:

	cmpli	cr0,r3,1024

This appears to be a PPC440-ism, looking at the "PPC440x5 CPU Core
User’s Manual" it shows cmpli having no L field, but implied to be 0 due
to the core being 32-bit. It mentions that the ISA defines four
arguments and recommends using cmplwi.

It also corresponds to the old POWER instruction set, which had no L
field there, a reserved bit instead.

dcr-low.S is only built 32-bit, because it is only built when
DCR_NATIVE=y, which is only selected by 40x and 44x. Looking at the
generated code (with gcc/gas) we see cmplwi as expected.

Although gas is happy with the 3-argument version when building for
32-bit, the LLVM assembler is not and errors out with:

  arch/powerpc/sysdev/dcr-low.S:27:10: error: invalid operand for instruction
   cmpli 0,%r3,1024; ...
           ^

Switch to the cmplwi extended opcode, which avoids any confusion when
reading the ISA, fixes the issue with the LLVM assembler, and also means
the code could be built 64-bit in future (though that's very unlikely).

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
BugLink: https://github.com/ClangBuiltLinux/linux/issues/1419
Link: https://lore.kernel.org/r/20211014024424.528848-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/sysdev/dcr-low.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/sysdev/dcr-low.S b/arch/powerpc/sysdev/dcr-low.S
index efeeb1b885a17..329b9c4ae5429 100644
--- a/arch/powerpc/sysdev/dcr-low.S
+++ b/arch/powerpc/sysdev/dcr-low.S
@@ -11,7 +11,7 @@
 #include <asm/export.h>
 
 #define DCR_ACCESS_PROLOG(table) \
-	cmpli	cr0,r3,1024;	 \
+	cmplwi	cr0,r3,1024;	 \
 	rlwinm  r3,r3,4,18,27;   \
 	lis     r5,table@h;      \
 	ori     r5,r5,table@l;   \
-- 
2.33.0

[PATCH 5.4 030/100] sh: check return code of request_irq

[Greg Kroah-Hartman]

From: Nick Desaulniers <ndesaulniers@google.com>

[ Upstream commit 0e38225c92c7964482a8bb6b3e37fde4319e965c ]

request_irq is marked __must_check, but the call in shx3_prepare_cpus
has a void return type, so it can't propagate failure to the caller.
Follow cues from hexagon and just print an error.

Fixes: c7936b9abcf5 ("sh: smp: Hook in to the generic IPI handler for SH-X3 SMP.")
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sh/kernel/cpu/sh4a/smp-shx3.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
index f8a2bec0f260b..1261dc7b84e8b 100644
--- a/arch/sh/kernel/cpu/sh4a/smp-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
@@ -73,8 +73,9 @@ static void shx3_prepare_cpus(unsigned int max_cpus)
 	BUILD_BUG_ON(SMP_MSG_NR >= 8);
 
 	for (i = 0; i < SMP_MSG_NR; i++)
-		request_irq(104 + i, ipi_interrupt_handler,
-			    IRQF_PERCPU, "IPI", (void *)(long)i);
+		if (request_irq(104 + i, ipi_interrupt_handler,
+			    IRQF_PERCPU, "IPI", (void *)(long)i))
+			pr_err("Failed to request irq %d\n", i);
 
 	for (i = 0; i < max_cpus; i++)
 		set_cpu_present(i, true);
-- 
2.33.0

[PATCH 5.4 031/100] maple: fix wrong return value of maple_bus_init().

[Greg Kroah-Hartman]

From: Lu Wei <luwei32@huawei.com>

[ Upstream commit bde82ee391fa6d3ad054313c4aa7b726d32515ce ]

If KMEM_CACHE or maple_alloc_dev failed, the maple_bus_init() will return 0
rather than error, because the retval is not changed after KMEM_CACHE or
maple_alloc_dev failed.

Fixes: 17be2d2b1c33 ("sh: Add maple bus support for the SEGA Dreamcast.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/sh/maple/maple.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
index e5d7fb81ad665..44a931d41a132 100644
--- a/drivers/sh/maple/maple.c
+++ b/drivers/sh/maple/maple.c
@@ -835,8 +835,10 @@ static int __init maple_bus_init(void)
 
 	maple_queue_cache = KMEM_CACHE(maple_buffer, SLAB_HWCACHE_ALIGN);
 
-	if (!maple_queue_cache)
+	if (!maple_queue_cache) {
+		retval = -ENOMEM;
 		goto cleanup_bothirqs;
+	}
 
 	INIT_LIST_HEAD(&maple_waitq);
 	INIT_LIST_HEAD(&maple_sentq);
@@ -849,6 +851,7 @@ static int __init maple_bus_init(void)
 		if (!mdev[i]) {
 			while (i-- > 0)
 				maple_free_dev(mdev[i]);
+			retval = -ENOMEM;
 			goto cleanup_cache;
 		}
 		baseunits[i] = mdev[i];
-- 
2.33.0

[PATCH 5.4 032/100] f2fs: fix up f2fs_lookup tracepoints

[Greg Kroah-Hartman]

From: Gao Xiang <hsiangkao@linux.alibaba.com>

[ Upstream commit 70a9ac36ffd807ac506ed0b849f3e8ce3c6623f2 ]

Fix up a misuse that the filename pointer isn't always valid in
the ring buffer, and we should copy the content instead.

Fixes: 0c5e36db17f5 ("f2fs: trace f2fs_lookup")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/trace/events/f2fs.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/include/trace/events/f2fs.h b/include/trace/events/f2fs.h
index 1796ff99c3e9c..a7613efc271ab 100644
--- a/include/trace/events/f2fs.h
+++ b/include/trace/events/f2fs.h
@@ -793,20 +793,20 @@ TRACE_EVENT(f2fs_lookup_start,
 	TP_STRUCT__entry(
 		__field(dev_t,	dev)
 		__field(ino_t,	ino)
-		__field(const char *,	name)
+		__string(name,	dentry->d_name.name)
 		__field(unsigned int, flags)
 	),
 
 	TP_fast_assign(
 		__entry->dev	= dir->i_sb->s_dev;
 		__entry->ino	= dir->i_ino;
-		__entry->name	= dentry->d_name.name;
+		__assign_str(name, dentry->d_name.name);
 		__entry->flags	= flags;
 	),
 
 	TP_printk("dev = (%d,%d), pino = %lu, name:%s, flags:%u",
 		show_dev_ino(__entry),
-		__entry->name,
+		__get_str(name),
 		__entry->flags)
 );
 
@@ -820,7 +820,7 @@ TRACE_EVENT(f2fs_lookup_end,
 	TP_STRUCT__entry(
 		__field(dev_t,	dev)
 		__field(ino_t,	ino)
-		__field(const char *,	name)
+		__string(name,	dentry->d_name.name)
 		__field(nid_t,	cino)
 		__field(int,	err)
 	),
@@ -828,14 +828,14 @@ TRACE_EVENT(f2fs_lookup_end,
 	TP_fast_assign(
 		__entry->dev	= dir->i_sb->s_dev;
 		__entry->ino	= dir->i_ino;
-		__entry->name	= dentry->d_name.name;
+		__assign_str(name, dentry->d_name.name);
 		__entry->cino	= ino;
 		__entry->err	= err;
 	),
 
 	TP_printk("dev = (%d,%d), pino = %lu, name:%s, ino:%u, err:%d",
 		show_dev_ino(__entry),
-		__entry->name,
+		__get_str(name),
 		__entry->cino,
 		__entry->err)
 );
-- 
2.33.0

[PATCH 5.4 033/100] sh: fix kconfig unmet dependency warning for FRAME_POINTER

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit fda1bc533094a7db68b11e7503d2c6c73993d12a ]

FRAME_POINTER depends on DEBUG_KERNEL so DWARF_UNWINDER should
depend on DEBUG_KERNEL before selecting FRAME_POINTER.

WARNING: unmet direct dependencies detected for FRAME_POINTER
  Depends on [n]: DEBUG_KERNEL [=n] && (M68K || UML || SUPERH [=y]) || ARCH_WANT_FRAME_POINTERS [=n]
  Selected by [y]:
  - DWARF_UNWINDER [=y]

Fixes: bd353861c735 ("sh: dwarf unwinder support.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sh/Kconfig.debug | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 010b6c33bbba2..71acd3d9b9e83 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -58,6 +58,7 @@ config DUMP_CODE
 
 config DWARF_UNWINDER
 	bool "Enable the DWARF unwinder for stacktraces"
+	depends on DEBUG_KERNEL
 	select FRAME_POINTER
 	depends on SUPERH32
 	default n
-- 
2.33.0

[PATCH 5.4 034/100] sh: math-emu: drop unused functions

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit e25c252a9b033523c626f039d4b9a304f12f6775 ]

Delete ieee_fpe_handler() since it is not used. After that is done,
delete denormal_to_double() since it is not used:

.../arch/sh/math-emu/math.c:505:12: error: 'ieee_fpe_handler' defined but not used [-Werror=unused-function]
  505 | static int ieee_fpe_handler(struct pt_regs *regs)

.../arch/sh/math-emu/math.c:477:13: error: 'denormal_to_double' defined but not used [-Werror=unused-function]
  477 | static void denormal_to_double(struct sh_fpu_soft_struct *fpu, int n)

Fixes: 7caf62de25554da3 ("sh: remove unused do_fpu_error")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sh/math-emu/math.c | 103 ----------------------------------------
 1 file changed, 103 deletions(-)

diff --git a/arch/sh/math-emu/math.c b/arch/sh/math-emu/math.c
index e8be0eca0444a..615ba932c398e 100644
--- a/arch/sh/math-emu/math.c
+++ b/arch/sh/math-emu/math.c
@@ -467,109 +467,6 @@ static int fpu_emulate(u16 code, struct sh_fpu_soft_struct *fregs, struct pt_reg
 		return id_sys(fregs, regs, code);
 }
 
-/**
- *	denormal_to_double - Given denormalized float number,
- *	                     store double float
- *
- *	@fpu: Pointer to sh_fpu_soft structure
- *	@n: Index to FP register
- */
-static void denormal_to_double(struct sh_fpu_soft_struct *fpu, int n)
-{
-	unsigned long du, dl;
-	unsigned long x = fpu->fpul;
-	int exp = 1023 - 126;
-
-	if (x != 0 && (x & 0x7f800000) == 0) {
-		du = (x & 0x80000000);
-		while ((x & 0x00800000) == 0) {
-			x <<= 1;
-			exp--;
-		}
-		x &= 0x007fffff;
-		du |= (exp << 20) | (x >> 3);
-		dl = x << 29;
-
-		fpu->fp_regs[n] = du;
-		fpu->fp_regs[n+1] = dl;
-	}
-}
-
-/**
- *	ieee_fpe_handler - Handle denormalized number exception
- *
- *	@regs: Pointer to register structure
- *
- *	Returns 1 when it's handled (should not cause exception).
- */
-static int ieee_fpe_handler(struct pt_regs *regs)
-{
-	unsigned short insn = *(unsigned short *)regs->pc;
-	unsigned short finsn;
-	unsigned long nextpc;
-	int nib[4] = {
-		(insn >> 12) & 0xf,
-		(insn >> 8) & 0xf,
-		(insn >> 4) & 0xf,
-		insn & 0xf};
-
-	if (nib[0] == 0xb ||
-	    (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb)) /* bsr & jsr */
-		regs->pr = regs->pc + 4;
-
-	if (nib[0] == 0xa || nib[0] == 0xb) { /* bra & bsr */
-		nextpc = regs->pc + 4 + ((short) ((insn & 0xfff) << 4) >> 3);
-		finsn = *(unsigned short *) (regs->pc + 2);
-	} else if (nib[0] == 0x8 && nib[1] == 0xd) { /* bt/s */
-		if (regs->sr & 1)
-			nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1);
-		else
-			nextpc = regs->pc + 4;
-		finsn = *(unsigned short *) (regs->pc + 2);
-	} else if (nib[0] == 0x8 && nib[1] == 0xf) { /* bf/s */
-		if (regs->sr & 1)
-			nextpc = regs->pc + 4;
-		else
-			nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1);
-		finsn = *(unsigned short *) (regs->pc + 2);
-	} else if (nib[0] == 0x4 && nib[3] == 0xb &&
-		 (nib[2] == 0x0 || nib[2] == 0x2)) { /* jmp & jsr */
-		nextpc = regs->regs[nib[1]];
-		finsn = *(unsigned short *) (regs->pc + 2);
-	} else if (nib[0] == 0x0 && nib[3] == 0x3 &&
-		 (nib[2] == 0x0 || nib[2] == 0x2)) { /* braf & bsrf */
-		nextpc = regs->pc + 4 + regs->regs[nib[1]];
-		finsn = *(unsigned short *) (regs->pc + 2);
-	} else if (insn == 0x000b) { /* rts */
-		nextpc = regs->pr;
-		finsn = *(unsigned short *) (regs->pc + 2);
-	} else {
-		nextpc = regs->pc + 2;
-		finsn = insn;
-	}
-
-	if ((finsn & 0xf1ff) == 0xf0ad) { /* fcnvsd */
-		struct task_struct *tsk = current;
-
-		if ((tsk->thread.xstate->softfpu.fpscr & (1 << 17))) {
-			/* FPU error */
-			denormal_to_double (&tsk->thread.xstate->softfpu,
-					    (finsn >> 8) & 0xf);
-			tsk->thread.xstate->softfpu.fpscr &=
-				~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
-			task_thread_info(tsk)->status |= TS_USEDFPU;
-		} else {
-			force_sig_fault(SIGFPE, FPE_FLTINV,
-					(void __user *)regs->pc);
-		}
-
-		regs->pc = nextpc;
-		return 1;
-	}
-
-	return 0;
-}
-
 /**
  * fpu_init - Initialize FPU registers
  * @fpu: Pointer to software emulated FPU registers.
-- 
2.33.0

[PATCH 5.4 035/100] sh: define __BIG_ENDIAN for math-emu

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit b929926f01f2d14635345d22eafcf60feed1085e ]

Fix this by defining both ENDIAN macros in
<asm/sfp-machine.h> so that they can be utilized in
<math-emu/soft-fp.h> according to the latter's comment:
/* Allow sfp-machine to have its own byte order definitions. */

(This is what is done in arch/nds32/include/asm/sfp-machine.h.)

This placates these build warnings:

In file included from ../arch/sh/math-emu/math.c:23:
.../include/math-emu/single.h:50:21: warning: "__BIG_ENDIAN" is not defined, evaluates to 0 [-Wundef]
   50 | #if __BYTE_ORDER == __BIG_ENDIAN
In file included from ../arch/sh/math-emu/math.c:24:
.../include/math-emu/double.h:59:21: warning: "__BIG_ENDIAN" is not defined, evaluates to 0 [-Wundef]
   59 | #if __BYTE_ORDER == __BIG_ENDIAN

Fixes: 4b565680d163 ("sh: math-emu support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sh/include/asm/sfp-machine.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/sh/include/asm/sfp-machine.h b/arch/sh/include/asm/sfp-machine.h
index cbc7cf8c97ce6..2d2423478b71d 100644
--- a/arch/sh/include/asm/sfp-machine.h
+++ b/arch/sh/include/asm/sfp-machine.h
@@ -13,6 +13,14 @@
 #ifndef _SFP_MACHINE_H
 #define _SFP_MACHINE_H
 
+#ifdef __BIG_ENDIAN__
+#define __BYTE_ORDER __BIG_ENDIAN
+#define __LITTLE_ENDIAN 0
+#else
+#define __BYTE_ORDER __LITTLE_ENDIAN
+#define __BIG_ENDIAN 0
+#endif
+
 #define _FP_W_TYPE_SIZE		32
 #define _FP_W_TYPE		unsigned long
 #define _FP_WS_TYPE		signed long
-- 
2.33.0

[PATCH 5.4 036/100] clk: ingenic: Fix bugs with divided dividers

[Greg Kroah-Hartman]

From: Paul Cercueil <paul@crapouillou.net>

[ Upstream commit ed84ef1cd7eddf933d4ffce2caa8161d6f947245 ]

Two fixes in one:

- In the "impose hardware constraints" block, the "logical" divider
  value (aka. not translated to the hardware) was clamped to fit in the
  register area, but this totally ignored the fact that the divider
  value can itself have a fixed divider.

- The code that made sure that the divider value returned by the
  function was a multiple of its own fixed divider could result in a
  wrong value being calculated, because it was rounded down instead of
  rounded up.

Fixes: 4afe2d1a6ed5 ("clk: ingenic: Allow divider value to be divided")
Co-developed-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211001172033.122329-1-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/ingenic/cgu.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index 7490d4f4d9366..dff759c0f6193 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -426,15 +426,15 @@ ingenic_clk_calc_div(const struct ingenic_cgu_clk_info *clk_info,
 	}
 
 	/* Impose hardware constraints */
-	div = min_t(unsigned, div, 1 << clk_info->div.bits);
-	div = max_t(unsigned, div, 1);
+	div = clamp_t(unsigned int, div, clk_info->div.div,
+		      clk_info->div.div << clk_info->div.bits);
 
 	/*
 	 * If the divider value itself must be divided before being written to
 	 * the divider register, we must ensure we don't have any bits set that
 	 * would be lost as a result of doing so.
 	 */
-	div /= clk_info->div.div;
+	div = DIV_ROUND_UP(div, clk_info->div.div);
 	div *= clk_info->div.div;
 
 	return div;
-- 
2.33.0

[PATCH 5.4 037/100] clk/ast2600: Fix soc revision for AHB

[Greg Kroah-Hartman]

From: Joel Stanley <joel@jms.id.au>

[ Upstream commit f45c5b1c27293f834682e89003f88b3512329ab4 ]

Move the soc revision parsing to the initial probe, saving the driver
from parsing the register multiple times.

Use this variable to select the correct divisor table for the AHB clock.
Before this fix the A2 would have used the A0 table.

Fixes: 2d491066ccd4 ("clk: ast2600: Fix AHB clock divider for A1")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210922235449.213631-1-joel@jms.id.au
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/clk-ast2600.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c
index af957179b135e..48122f574cb65 100644
--- a/drivers/clk/clk-ast2600.c
+++ b/drivers/clk/clk-ast2600.c
@@ -48,6 +48,8 @@ static DEFINE_SPINLOCK(aspeed_g6_clk_lock);
 static struct clk_hw_onecell_data *aspeed_g6_clk_data;
 
 static void __iomem *scu_g6_base;
+/* AST2600 revision: A0, A1, A2, etc */
+static u8 soc_rev;
 
 /*
  * Clocks marked with CLK_IS_CRITICAL:
@@ -190,9 +192,8 @@ static struct clk_hw *ast2600_calc_pll(const char *name, u32 val)
 static struct clk_hw *ast2600_calc_apll(const char *name, u32 val)
 {
 	unsigned int mult, div;
-	u32 chip_id = readl(scu_g6_base + ASPEED_G6_SILICON_REV);
 
-	if (((chip_id & CHIP_REVISION_ID) >> 16) >= 2) {
+	if (soc_rev >= 2) {
 		if (val & BIT(24)) {
 			/* Pass through mode */
 			mult = div = 1;
@@ -664,7 +665,7 @@ static const u32 ast2600_a1_axi_ahb200_tbl[] = {
 static void __init aspeed_g6_cc(struct regmap *map)
 {
 	struct clk_hw *hw;
-	u32 val, div, divbits, chip_id, axi_div, ahb_div;
+	u32 val, div, divbits, axi_div, ahb_div;
 
 	clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, 25000000);
 
@@ -695,8 +696,7 @@ static void __init aspeed_g6_cc(struct regmap *map)
 		axi_div = 2;
 
 	divbits = (val >> 11) & 0x3;
-	regmap_read(map, ASPEED_G6_SILICON_REV, &chip_id);
-	if (chip_id & BIT(16)) {
+	if (soc_rev >= 1) {
 		if (!divbits) {
 			ahb_div = ast2600_a1_axi_ahb200_tbl[(val >> 8) & 0x3];
 			if (val & BIT(16))
@@ -741,6 +741,8 @@ static void __init aspeed_g6_cc_init(struct device_node *np)
 	if (!scu_g6_base)
 		return;
 
+	soc_rev = (readl(scu_g6_base + ASPEED_G6_SILICON_REV) & CHIP_REVISION_ID) >> 16;
+
 	aspeed_g6_clk_data = kzalloc(struct_size(aspeed_g6_clk_data, hws,
 				      ASPEED_G6_NUM_CLKS), GFP_KERNEL);
 	if (!aspeed_g6_clk_data)
-- 
2.33.0

[PATCH 5.4 038/100] clk: qcom: gcc-msm8996: Drop (again) gcc_aggre1_pnoc_ahb_clk

[Greg Kroah-Hartman]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit 05cf3ec00d460b50088d421fb878a0f83f57e262 ]

The gcc_aggre1_pnoc_ahb_clk is crucial for the proper MSM8996/APQ8096
functioning. If it gets disabled, several subsytems will stop working
(including eMMC/SDCC and USB). There are no in-kernel users of this
clock, so it is much simpler to remove from the kernel.

The clock was first removed in the commit 9e60de1cf270 ("clk: qcom:
Remove gcc_aggre1_pnoc_ahb_clk from msm8996") by Stephen Boyd, but got
added back in the commit b567752144e3 ("clk: qcom: Add some missing gcc
clks for msm8996") by Rajendra Nayak.

Let's remove it again in hope that nobody adds it back.

Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Fixes: b567752144e3 ("clk: qcom: Add some missing gcc clks for msm8996")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211104011155.2209654-1-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/gcc-msm8996.c | 15 ---------------
 1 file changed, 15 deletions(-)

diff --git a/drivers/clk/qcom/gcc-msm8996.c b/drivers/clk/qcom/gcc-msm8996.c
index d004cdaa0e39a..c1e1148f0261d 100644
--- a/drivers/clk/qcom/gcc-msm8996.c
+++ b/drivers/clk/qcom/gcc-msm8996.c
@@ -2937,20 +2937,6 @@ static struct clk_branch gcc_smmu_aggre0_ahb_clk = {
 	},
 };
 
-static struct clk_branch gcc_aggre1_pnoc_ahb_clk = {
-	.halt_reg = 0x82014,
-	.clkr = {
-		.enable_reg = 0x82014,
-		.enable_mask = BIT(0),
-		.hw.init = &(struct clk_init_data){
-			.name = "gcc_aggre1_pnoc_ahb_clk",
-			.parent_names = (const char *[]){ "periph_noc_clk_src" },
-			.num_parents = 1,
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
 static struct clk_branch gcc_aggre2_ufs_axi_clk = {
 	.halt_reg = 0x83014,
 	.clkr = {
@@ -3453,7 +3439,6 @@ static struct clk_regmap *gcc_msm8996_clocks[] = {
 	[GCC_AGGRE0_CNOC_AHB_CLK] = &gcc_aggre0_cnoc_ahb_clk.clkr,
 	[GCC_SMMU_AGGRE0_AXI_CLK] = &gcc_smmu_aggre0_axi_clk.clkr,
 	[GCC_SMMU_AGGRE0_AHB_CLK] = &gcc_smmu_aggre0_ahb_clk.clkr,
-	[GCC_AGGRE1_PNOC_AHB_CLK] = &gcc_aggre1_pnoc_ahb_clk.clkr,
 	[GCC_AGGRE2_UFS_AXI_CLK] = &gcc_aggre2_ufs_axi_clk.clkr,
 	[GCC_AGGRE2_USB3_AXI_CLK] = &gcc_aggre2_usb3_axi_clk.clkr,
 	[GCC_QSPI_AHB_CLK] = &gcc_qspi_ahb_clk.clkr,
-- 
2.33.0

[PATCH 5.4 039/100] mips: BCM63XX: ensure that CPU_SUPPORTS_32BIT_KERNEL is set

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 5eeaafc8d69373c095e461bdb39e5c9b62228ac5 ]

Several header files need info on CONFIG_32BIT or CONFIG_64BIT,
but kconfig symbol BCM63XX does not provide that info. This leads
to many build errors, e.g.:

   arch/mips/include/asm/page.h:196:13: error: use of undeclared identifier 'CAC_BASE'
           return x - PAGE_OFFSET + PHYS_OFFSET;
   arch/mips/include/asm/mach-generic/spaces.h:91:23: note: expanded from macro 'PAGE_OFFSET'
   #define PAGE_OFFSET             (CAC_BASE + PHYS_OFFSET)
   arch/mips/include/asm/io.h:134:28: error: use of undeclared identifier 'CAC_BASE'
           return (void *)(address + PAGE_OFFSET - PHYS_OFFSET);
   arch/mips/include/asm/mach-generic/spaces.h:91:23: note: expanded from macro 'PAGE_OFFSET'
   #define PAGE_OFFSET             (CAC_BASE + PHYS_OFFSET)

arch/mips/include/asm/uaccess.h:82:10: error: use of undeclared identifier '__UA_LIMIT'
           return (__UA_LIMIT & (addr | (addr + size) | __ua_size(size))) == 0;

Selecting the SYS_HAS_CPU_BMIPS* symbols causes SYS_HAS_CPU_BMIPS to be
set, which then selects CPU_SUPPORT_32BIT_KERNEL, which causes
CONFIG_32BIT to be set. (a bit more indirect than v1 [RFC].)

Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-mips@vger.kernel.org
Cc: Paul Burton <paulburton@kernel.org>
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Ralf Baechle <ralf@linux-mips.org>
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/Kconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 041d34975ea2c..9749818eed6d6 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -294,6 +294,9 @@ config BCM63XX
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
+	select SYS_HAS_CPU_BMIPS32_3300
+	select SYS_HAS_CPU_BMIPS4350
+	select SYS_HAS_CPU_BMIPS4380
 	select SWAP_IO_SPACE
 	select GPIOLIB
 	select HAVE_CLK
-- 
2.33.0

[PATCH 5.4 040/100] sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()

[Greg Kroah-Hartman]

From: Vincent Donnefort <vincent.donnefort@arm.com>

[ Upstream commit 42dc938a590c96eeb429e1830123fef2366d9c80 ]

Nothing protects the access to the per_cpu variable sd_llc_id. When testing
the same CPU (i.e. this_cpu == that_cpu), a race condition exists with
update_top_cache_domain(). One scenario being:

              CPU1                            CPU2
  ==================================================================

  per_cpu(sd_llc_id, CPUX) => 0
                                    partition_sched_domains_locked()
      				      detach_destroy_domains()
  cpus_share_cache(CPUX, CPUX)          update_top_cache_domain(CPUX)
    per_cpu(sd_llc_id, CPUX) => 0
                                          per_cpu(sd_llc_id, CPUX) = CPUX
    per_cpu(sd_llc_id, CPUX) => CPUX
    return false

ttwu_queue_cond() wouldn't catch smp_processor_id() == cpu and the result
is a warning triggered from ttwu_queue_wakelist().

Avoid a such race in cpus_share_cache() by always returning true when
this_cpu == that_cpu.

Fixes: 518cd6234178 ("sched: Only queue remote wakeups when crossing cache boundaries")
Reported-by: Jing-Ting Wu <jing-ting.wu@mediatek.com>
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20211104175120.857087-1-vincent.donnefort@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 5dc43d37e6a2b..f8ca0738d729e 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -2482,6 +2482,9 @@ out:
 
 bool cpus_share_cache(int this_cpu, int that_cpu)
 {
+	if (this_cpu == that_cpu)
+		return true;
+
 	return per_cpu(sd_llc_id, this_cpu) == per_cpu(sd_llc_id, that_cpu);
 }
 #endif /* CONFIG_SMP */
-- 
2.33.0

[PATCH 5.4 041/100] tracing: Save normal string variables

[Greg Kroah-Hartman]

From: Tom Zanussi <zanussi@kernel.org>

[ Upstream commit 63a1e5de3006f4ad713e4d72bcb404d0301e853d ]

String variables created as field variables and save variables are
already handled properly by having their values copied when set.  The
same isn't done for normal variables, but needs to be - simply saving
a pointer to a string contained in an old event isn't sufficient,
since that event's data may quickly become overwritten and therefore a
string pointer to it could yield garbage.

This change uses the same mechanism as field variables and simply
appends the new strings to the existing per-element field_var_str[]
array allocated for that purpose.

Link: https://lkml.kernel.org/r/1c1a03798b02e67307412a0c719d1bfb69b13007.1601848695.git.zanussi@kernel.org

Fixes: 02205a6752f2 (tracing: Add support for 'field variables')
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace_events_hist.c | 34 ++++++++++++++++++++++++++++++--
 1 file changed, 32 insertions(+), 2 deletions(-)

diff --git a/kernel/trace/trace_events_hist.c b/kernel/trace/trace_events_hist.c
index f63766366e238..9a73c187d241e 100644
--- a/kernel/trace/trace_events_hist.c
+++ b/kernel/trace/trace_events_hist.c
@@ -149,6 +149,8 @@ struct hist_field {
 	 */
 	unsigned int			var_ref_idx;
 	bool                            read_once;
+
+	unsigned int			var_str_idx;
 };
 
 static u64 hist_field_none(struct hist_field *field,
@@ -351,6 +353,7 @@ struct hist_trigger_data {
 	unsigned int			n_keys;
 	unsigned int			n_fields;
 	unsigned int			n_vars;
+	unsigned int			n_var_str;
 	unsigned int			key_size;
 	struct tracing_map_sort_key	sort_keys[TRACING_MAP_SORT_KEYS_MAX];
 	unsigned int			n_sort_keys;
@@ -2305,7 +2308,12 @@ static int hist_trigger_elt_data_alloc(struct tracing_map_elt *elt)
 		}
 	}
 
-	n_str = hist_data->n_field_var_str + hist_data->n_save_var_str;
+	n_str = hist_data->n_field_var_str + hist_data->n_save_var_str +
+		hist_data->n_var_str;
+	if (n_str > SYNTH_FIELDS_MAX) {
+		hist_elt_data_free(elt_data);
+		return -EINVAL;
+	}
 
 	size = STR_VAR_LEN_MAX;
 
@@ -4599,6 +4607,7 @@ static int create_var_field(struct hist_trigger_data *hist_data,
 {
 	struct trace_array *tr = hist_data->event_file->tr;
 	unsigned long flags = 0;
+	int ret;
 
 	if (WARN_ON(val_idx >= TRACING_MAP_VALS_MAX + TRACING_MAP_VARS_MAX))
 		return -EINVAL;
@@ -4613,7 +4622,12 @@ static int create_var_field(struct hist_trigger_data *hist_data,
 	if (WARN_ON(hist_data->n_vars > TRACING_MAP_VARS_MAX))
 		return -EINVAL;
 
-	return __create_val_field(hist_data, val_idx, file, var_name, expr_str, flags);
+	ret = __create_val_field(hist_data, val_idx, file, var_name, expr_str, flags);
+
+	if (hist_data->fields[val_idx]->flags & HIST_FIELD_FL_STRING)
+		hist_data->fields[val_idx]->var_str_idx = hist_data->n_var_str++;
+
+	return ret;
 }
 
 static int create_val_fields(struct hist_trigger_data *hist_data,
@@ -5333,6 +5347,22 @@ static void hist_trigger_elt_update(struct hist_trigger_data *hist_data,
 		hist_val = hist_field->fn(hist_field, elt, rbe, rec);
 		if (hist_field->flags & HIST_FIELD_FL_VAR) {
 			var_idx = hist_field->var.idx;
+
+			if (hist_field->flags & HIST_FIELD_FL_STRING) {
+				unsigned int str_start, var_str_idx, idx;
+				char *str, *val_str;
+
+				str_start = hist_data->n_field_var_str +
+					hist_data->n_save_var_str;
+				var_str_idx = hist_field->var_str_idx;
+				idx = str_start + var_str_idx;
+
+				str = elt_data->field_var_str[idx];
+				val_str = (char *)(uintptr_t)hist_val;
+				strscpy(str, val_str, STR_VAR_LEN_MAX);
+
+				hist_val = (u64)(uintptr_t)str;
+			}
 			tracing_map_set_var(elt, var_idx, hist_val);
 			continue;
 		}
-- 
2.33.0

[PATCH 5.4 042/100] tracing/histogram: Do not copy the fixed-size char array field over the field size

[Greg Kroah-Hartman]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 63f84ae6b82bb4dff672f76f30c6fd7b9d3766bc ]

Do not copy the fixed-size char array field of the events over
the field size. The histogram treats char array as a string and
there are 2 types of char array in the event, fixed-size and
dynamic string. The dynamic string (__data_loc) field must be
null terminated, but the fixed-size char array field may not
be null terminated (not a string, but just a data).
In that case, histogram can copy the data after the field.
This uses the original field size for fixed-size char array
field to restrict the histogram not to access over the original
field size.

Link: https://lkml.kernel.org/r/163673292822.195747.3696966210526410250.stgit@devnote2

Fixes: 02205a6752f2 (tracing: Add support for 'field variables')
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace_events_hist.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/kernel/trace/trace_events_hist.c b/kernel/trace/trace_events_hist.c
index 9a73c187d241e..8b33a3c872750 100644
--- a/kernel/trace/trace_events_hist.c
+++ b/kernel/trace/trace_events_hist.c
@@ -2590,9 +2590,10 @@ static struct hist_field *create_hist_field(struct hist_trigger_data *hist_data,
 		if (!hist_field->type)
 			goto free;
 
-		if (field->filter_type == FILTER_STATIC_STRING)
+		if (field->filter_type == FILTER_STATIC_STRING) {
 			hist_field->fn = hist_field_string;
-		else if (field->filter_type == FILTER_DYN_STRING)
+			hist_field->size = field->size;
+		} else if (field->filter_type == FILTER_DYN_STRING)
 			hist_field->fn = hist_field_dynstring;
 		else
 			hist_field->fn = hist_field_pstring;
@@ -3530,7 +3531,7 @@ static inline void __update_field_vars(struct tracing_map_elt *elt,
 			char *str = elt_data->field_var_str[j++];
 			char *val_str = (char *)(uintptr_t)var_val;
 
-			strscpy(str, val_str, STR_VAR_LEN_MAX);
+			strscpy(str, val_str, val->size);
 			var_val = (u64)(uintptr_t)str;
 		}
 		tracing_map_set_var(elt, var_idx, var_val);
@@ -5359,7 +5360,7 @@ static void hist_trigger_elt_update(struct hist_trigger_data *hist_data,
 
 				str = elt_data->field_var_str[idx];
 				val_str = (char *)(uintptr_t)hist_val;
-				strscpy(str, val_str, STR_VAR_LEN_MAX);
+				strscpy(str, val_str, hist_field->size);
 
 				hist_val = (u64)(uintptr_t)str;
 			}
-- 
2.33.0

[PATCH 5.4 043/100] RDMA/netlink: Add __maybe_unused to static inline in C file

[Greg Kroah-Hartman]

From: Leon Romanovsky <leonro@nvidia.com>

commit 83dde7498fefeb920b1def317421262317d178e5 upstream.

Like other commits in the tree add __maybe_unused to a static inline in a
C file because some clang compilers will complain about unused code:

>> drivers/infiniband/core/nldev.c:2543:1: warning: unused function '__chk_RDMA_NL_NLDEV'
   MODULE_ALIAS_RDMA_NETLINK(RDMA_NL_NLDEV, 5);
   ^

Fixes: e3bf14bdc17a ("rdma: Autoload netlink client modules")
Link: https://lore.kernel.org/r/4a8101919b765e01d7fde6f27fd572c958deeb4a.1636267207.git.leonro@nvidia.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/rdma/rdma_netlink.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/rdma/rdma_netlink.h
+++ b/include/rdma/rdma_netlink.h
@@ -30,7 +30,7 @@ enum rdma_nl_flags {
  * constant as well and the compiler checks they are the same.
  */
 #define MODULE_ALIAS_RDMA_NETLINK(_index, _val)                                \
-	static inline void __chk_##_index(void)                                \
+	static inline void __maybe_unused __chk_##_index(void)                 \
 	{                                                                      \
 		BUILD_BUG_ON(_index != _val);                                  \
 	}                                                                      \

[PATCH 5.4 044/100] perf bpf: Avoid memory leak from perf_env__insert_btf()

[Greg Kroah-Hartman]

From: Ian Rogers <irogers@google.com>

[ Upstream commit 4924b1f7c46711762fd0e65c135ccfbcfd6ded1f ]

perf_env__insert_btf() doesn't insert if a duplicate BTF id is
encountered and this causes a memory leak. Modify the function to return
a success/error value and then free the memory if insertion didn't
happen.

v2. Adds a return -1 when the insertion error occurs in
    perf_env__fetch_btf. This doesn't affect anything as the result is
    never checked.

Fixes: 3792cb2ff43b1b19 ("perf bpf: Save BTF in a rbtree in perf_env")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211112074525.121633-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/bpf-event.c | 6 +++++-
 tools/perf/util/env.c       | 5 ++++-
 tools/perf/util/env.h       | 2 +-
 3 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/tools/perf/util/bpf-event.c b/tools/perf/util/bpf-event.c
index c766813d56be0..782c0c8a9a836 100644
--- a/tools/perf/util/bpf-event.c
+++ b/tools/perf/util/bpf-event.c
@@ -108,7 +108,11 @@ static int perf_env__fetch_btf(struct perf_env *env,
 	node->data_size = data_size;
 	memcpy(node->data, data, data_size);
 
-	perf_env__insert_btf(env, node);
+	if (!perf_env__insert_btf(env, node)) {
+		/* Insertion failed because of a duplicate. */
+		free(node);
+		return -1;
+	}
 	return 0;
 }
 
diff --git a/tools/perf/util/env.c b/tools/perf/util/env.c
index 0fafcf264d235..ef64e197bc8df 100644
--- a/tools/perf/util/env.c
+++ b/tools/perf/util/env.c
@@ -69,12 +69,13 @@ out:
 	return node;
 }
 
-void perf_env__insert_btf(struct perf_env *env, struct btf_node *btf_node)
+bool perf_env__insert_btf(struct perf_env *env, struct btf_node *btf_node)
 {
 	struct rb_node *parent = NULL;
 	__u32 btf_id = btf_node->id;
 	struct btf_node *node;
 	struct rb_node **p;
+	bool ret = true;
 
 	down_write(&env->bpf_progs.lock);
 	p = &env->bpf_progs.btfs.rb_node;
@@ -88,6 +89,7 @@ void perf_env__insert_btf(struct perf_env *env, struct btf_node *btf_node)
 			p = &(*p)->rb_right;
 		} else {
 			pr_debug("duplicated btf %u\n", btf_id);
+			ret = false;
 			goto out;
 		}
 	}
@@ -97,6 +99,7 @@ void perf_env__insert_btf(struct perf_env *env, struct btf_node *btf_node)
 	env->bpf_progs.btfs_cnt++;
 out:
 	up_write(&env->bpf_progs.lock);
+	return ret;
 }
 
 struct btf_node *perf_env__find_btf(struct perf_env *env, __u32 btf_id)
diff --git a/tools/perf/util/env.h b/tools/perf/util/env.h
index db40906e29373..37028215d4a53 100644
--- a/tools/perf/util/env.h
+++ b/tools/perf/util/env.h
@@ -117,6 +117,6 @@ void perf_env__insert_bpf_prog_info(struct perf_env *env,
 				    struct bpf_prog_info_node *info_node);
 struct bpf_prog_info_node *perf_env__find_bpf_prog_info(struct perf_env *env,
 							__u32 prog_id);
-void perf_env__insert_btf(struct perf_env *env, struct btf_node *btf_node);
+bool perf_env__insert_btf(struct perf_env *env, struct btf_node *btf_node);
 struct btf_node *perf_env__find_btf(struct perf_env *env, __u32 btf_id);
 #endif /* __PERF_ENV_H */
-- 
2.33.0

[PATCH 5.4 045/100] perf bench futex: Fix memory leak of perf_cpu_map__new()

[Greg Kroah-Hartman]

From: Sohaib Mohamed <sohaib.amhmd@gmail.com>

[ Upstream commit 88e48238d53682281c9de2a0b65d24d3b64542a0 ]

ASan reports memory leaks while running:

  $ sudo ./perf bench futex all

The leaks are caused by perf_cpu_map__new not being freed.
This patch adds the missing perf_cpu_map__put since it calls
cpu_map_delete implicitly.

Fixes: 9c3516d1b850ea93 ("libperf: Add perf_cpu_map__new()/perf_cpu_map__read() functions")
Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20211112201134.77892-1-sohaib.amhmd@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/bench/futex-lock-pi.c       | 1 +
 tools/perf/bench/futex-requeue.c       | 1 +
 tools/perf/bench/futex-wake-parallel.c | 1 +
 tools/perf/bench/futex-wake.c          | 1 +
 4 files changed, 4 insertions(+)

diff --git a/tools/perf/bench/futex-lock-pi.c b/tools/perf/bench/futex-lock-pi.c
index 30d97121dc4fb..c54013806ba4a 100644
--- a/tools/perf/bench/futex-lock-pi.c
+++ b/tools/perf/bench/futex-lock-pi.c
@@ -224,6 +224,7 @@ int bench_futex_lock_pi(int argc, const char **argv)
 	print_summary();
 
 	free(worker);
+	perf_cpu_map__put(cpu);
 	return ret;
 err:
 	usage_with_options(bench_futex_lock_pi_usage, options);
diff --git a/tools/perf/bench/futex-requeue.c b/tools/perf/bench/futex-requeue.c
index a00a6891447ab..11b7dbd374864 100644
--- a/tools/perf/bench/futex-requeue.c
+++ b/tools/perf/bench/futex-requeue.c
@@ -215,6 +215,7 @@ int bench_futex_requeue(int argc, const char **argv)
 	print_summary();
 
 	free(worker);
+	perf_cpu_map__put(cpu);
 	return ret;
 err:
 	usage_with_options(bench_futex_requeue_usage, options);
diff --git a/tools/perf/bench/futex-wake-parallel.c b/tools/perf/bench/futex-wake-parallel.c
index a053cf2b70397..c3033d0905db1 100644
--- a/tools/perf/bench/futex-wake-parallel.c
+++ b/tools/perf/bench/futex-wake-parallel.c
@@ -319,6 +319,7 @@ int bench_futex_wake_parallel(int argc, const char **argv)
 	print_summary();
 
 	free(blocked_worker);
+	perf_cpu_map__put(cpu);
 	return ret;
 }
 #endif /* HAVE_PTHREAD_BARRIER */
diff --git a/tools/perf/bench/futex-wake.c b/tools/perf/bench/futex-wake.c
index 58906e9499bb0..ad44a78392dc4 100644
--- a/tools/perf/bench/futex-wake.c
+++ b/tools/perf/bench/futex-wake.c
@@ -209,5 +209,6 @@ int bench_futex_wake(int argc, const char **argv)
 	print_summary();
 
 	free(worker);
+	perf_cpu_map__put(cpu);
 	return ret;
 }
-- 
2.33.0

[PATCH 5.4 046/100] perf tests: Remove bash construct from record+zstd_comp_decomp.sh

[Greg Kroah-Hartman]

From: James Clark <james.clark@arm.com>

[ Upstream commit a9cdc1c5e3700a5200e5ca1f90b6958b6483845b ]

Commit 463538a383a2 ("perf tests: Fix test 68 zstd compression for
s390") inadvertently removed the -g flag from all platforms rather than
just s390, because the [[ ]] construct fails in sh. Changing to single
brackets restores testing of call graphs and removes the following error
from the output:

  $ ./perf test -v 85
  85: Zstd perf.data compression/decompression                        :
  --- start ---
  test child forked, pid 50643
  Collecting compressed record file:
  ./tests/shell/record+zstd_comp_decomp.sh: 15: [[: not found

Fixes: 463538a383a2 ("perf tests: Fix test 68 zstd compression for s390")
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20211028134828.65774-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/tests/shell/record+zstd_comp_decomp.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/tests/shell/record+zstd_comp_decomp.sh b/tools/perf/tests/shell/record+zstd_comp_decomp.sh
index 045723b3d9928..c62af807198de 100755
--- a/tools/perf/tests/shell/record+zstd_comp_decomp.sh
+++ b/tools/perf/tests/shell/record+zstd_comp_decomp.sh
@@ -12,7 +12,7 @@ skip_if_no_z_record() {
 
 collect_z_record() {
 	echo "Collecting compressed record file:"
-	[[ "$(uname -m)" != s390x ]] && gflag='-g'
+	[ "$(uname -m)" != s390x ] && gflag='-g'
 	$perf_tool record -o $trace_file $gflag -z -F 5000 -- \
 		dd count=500 if=/dev/urandom of=/dev/null
 }
-- 
2.33.0

[PATCH 5.4 047/100] net: bnx2x: fix variable dereferenced before check

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

[ Upstream commit f8885ac89ce310570e5391fe0bf0ec9c7c9b4fdc ]

Smatch says:
	bnx2x_init_ops.h:640 bnx2x_ilt_client_mem_op()
	warn: variable dereferenced before check 'ilt' (see line 638)

Move ilt_cli variable initialization _after_ ilt validation, because
it's unsafe to deref the pointer before validation check.

Fixes: 523224a3b3cd ("bnx2x, cnic, bnx2i: use new FW/HSI")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h
index 1835d2e451c01..fc7fce642666c 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h
@@ -635,11 +635,13 @@ static int bnx2x_ilt_client_mem_op(struct bnx2x *bp, int cli_num,
 {
 	int i, rc;
 	struct bnx2x_ilt *ilt = BP_ILT(bp);
-	struct ilt_client_info *ilt_cli = &ilt->clients[cli_num];
+	struct ilt_client_info *ilt_cli;
 
 	if (!ilt || !ilt->lines)
 		return -1;
 
+	ilt_cli = &ilt->clients[cli_num];
+
 	if (ilt_cli->flags & (ILT_CLIENT_SKIP_INIT | ILT_CLIENT_SKIP_MEM))
 		return 0;
 
-- 
2.33.0

[PATCH 5.4 048/100] iavf: check for null in iavf_fix_features

[Greg Kroah-Hartman]

From: Nicholas Nunley <nicholas.d.nunley@intel.com>

[ Upstream commit 8a4a126f4be88eb8b5f00a165ab58c35edf4ef76 ]

If the driver has lost contact with the PF then it enters a disabled state
and frees adapter->vf_res. However, ndo_fix_features can still be called on
the interface, so we need to check for this condition first. Since we have
no information on the features at this time simply leave them unmodified
and return.

Fixes: c4445aedfe09 ("i40evf: Fix VLAN features")
Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/iavf/iavf_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index bc46c262b42d8..d6a239ba0240e 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -3425,7 +3425,8 @@ static netdev_features_t iavf_fix_features(struct net_device *netdev,
 {
 	struct iavf_adapter *adapter = netdev_priv(netdev);
 
-	if (!(adapter->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_VLAN))
+	if (adapter->vf_res &&
+	    !(adapter->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_VLAN))
 		features &= ~(NETIF_F_HW_VLAN_CTAG_TX |
 			      NETIF_F_HW_VLAN_CTAG_RX |
 			      NETIF_F_HW_VLAN_CTAG_FILTER);
-- 
2.33.0

[PATCH 5.4 049/100] iavf: free q_vectors before queues in iavf_disable_vf

[Greg Kroah-Hartman]

From: Nicholas Nunley <nicholas.d.nunley@intel.com>

[ Upstream commit 89f22f129696ab53cfbc608e0a2184d0fea46ac1 ]

iavf_free_queues() clears adapter->num_active_queues, which
iavf_free_q_vectors() relies on, so swap the order of these two function
calls in iavf_disable_vf(). This resolves a panic encountered when the
interface is disabled and then later brought up again after PF
communication is restored.

Fixes: 65c7006f234c ("i40evf: assign num_active_queues inside i40evf_alloc_queues")
Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/iavf/iavf_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index d6a239ba0240e..c7e365267bc0f 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -2057,8 +2057,8 @@ static void iavf_disable_vf(struct iavf_adapter *adapter)
 
 	iavf_free_misc_irq(adapter);
 	iavf_reset_interrupt_capability(adapter);
-	iavf_free_queues(adapter);
 	iavf_free_q_vectors(adapter);
+	iavf_free_queues(adapter);
 	memset(adapter->vf_res, 0, IAVF_VIRTCHNL_VF_RESOURCE_SIZE);
 	iavf_shutdown_adminq(&adapter->hw);
 	adapter->netdev->flags &= ~IFF_UP;
-- 
2.33.0

[PATCH 5.4 050/100] iavf: Fix failure to exit out from last all-multicast mode

[Greg Kroah-Hartman]

From: Piotr Marczak <piotr.marczak@intel.com>

[ Upstream commit 8905072a192fffe9389255489db250c73ecab008 ]

The driver could only quit allmulti when allmulti and promisc modes are
turn on at the same time. If promisc had been off there was no way to turn
off allmulti mode.
The patch corrects this behavior. Switching allmulti does not depends on
promisc state mode anymore

Fixes: f42a5c74da99 ("i40e: Add allmulti support for the VF")
Signed-off-by: Piotr Marczak <piotr.marczak@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/iavf/iavf_main.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index c7e365267bc0f..43afe887cac9e 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -1626,8 +1626,7 @@ static int iavf_process_aq_command(struct iavf_adapter *adapter)
 		iavf_set_promiscuous(adapter, FLAG_VF_MULTICAST_PROMISC);
 		return 0;
 	}
-
-	if ((adapter->aq_required & IAVF_FLAG_AQ_RELEASE_PROMISC) &&
+	if ((adapter->aq_required & IAVF_FLAG_AQ_RELEASE_PROMISC) ||
 	    (adapter->aq_required & IAVF_FLAG_AQ_RELEASE_ALLMULTI)) {
 		iavf_set_promiscuous(adapter, 0);
 		return 0;
-- 
2.33.0

[PATCH 5.4 051/100] iavf: prevent accidental free of filter structure

[Greg Kroah-Hartman]

From: Jacob Keller <jacob.e.keller@intel.com>

[ Upstream commit 4f0400803818f2642f066d3eacaf013f23554cc7 ]

In iavf_config_clsflower, the filter structure could be accidentally
released at the end, if iavf_parse_cls_flower or iavf_handle_tclass ever
return a non-zero but positive value.

In this case, the function continues through to the end, and will call
kfree() on the filter structure even though it has been added to the
linked list.

This can actually happen because iavf_parse_cls_flower will return
a positive IAVF_ERR_CONFIG value instead of the traditional negative
error codes.

Fix this by ensuring that the kfree() check and error checks are
similar. Use the more idiomatic "if (err)" to catch all non-zero error
codes.

Fixes: 0075fa0fadd0 ("i40evf: Add support to apply cloud filters")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/iavf/iavf_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index 43afe887cac9e..6f6cd013eef3e 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -3033,11 +3033,11 @@ static int iavf_configure_clsflower(struct iavf_adapter *adapter,
 	/* start out with flow type and eth type IPv4 to begin with */
 	filter->f.flow_type = VIRTCHNL_TCP_V4_FLOW;
 	err = iavf_parse_cls_flower(adapter, cls_flower, filter);
-	if (err < 0)
+	if (err)
 		goto err;
 
 	err = iavf_handle_tclass(adapter, tc, filter);
-	if (err < 0)
+	if (err)
 		goto err;
 
 	/* add filter to the list */
-- 
2.33.0

[PATCH 5.4 052/100] iavf: validate pointers

[Greg Kroah-Hartman]

From: Mitch Williams <mitch.a.williams@intel.com>

[ Upstream commit 131b0edc4028bb88bb472456b1ddba526cfb7036 ]

In some cases, the ethtool get_rxfh handler may be called with a null
key or indir parameter. So check these pointers, or you will have a very
bad day.

Fixes: 43a3d9ba34c9 ("i40evf: Allow PF driver to configure RSS")
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c
index 758bef02a2a86..ad1e796e5544a 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c
@@ -962,14 +962,13 @@ static int iavf_get_rxfh(struct net_device *netdev, u32 *indir, u8 *key,
 
 	if (hfunc)
 		*hfunc = ETH_RSS_HASH_TOP;
-	if (!indir)
-		return 0;
-
-	memcpy(key, adapter->rss_key, adapter->rss_key_size);
+	if (key)
+		memcpy(key, adapter->rss_key, adapter->rss_key_size);
 
-	/* Each 32 bits pointed by 'indir' is stored with a lut entry */
-	for (i = 0; i < adapter->rss_lut_size; i++)
-		indir[i] = (u32)adapter->rss_lut[i];
+	if (indir)
+		/* Each 32 bits pointed by 'indir' is stored with a lut entry */
+		for (i = 0; i < adapter->rss_lut_size; i++)
+			indir[i] = (u32)adapter->rss_lut[i];
 
 	return 0;
 }
-- 
2.33.0

[PATCH 5.4 053/100] iavf: Fix for the false positive ASQ/ARQ errors while issuing VF reset

[Greg Kroah-Hartman]

From: Surabhi Boob <surabhi.boob@intel.com>

[ Upstream commit 321421b57a12e933f92b228e0e6d0b2c6541f41d ]

While issuing VF Reset from the guest OS, the VF driver prints
logs about critical / Overflow error detection. This is not an
actual error since the VF_MBX_ARQLEN register is set to all FF's
for a short period of time and the VF would catch the bits set if
it was reading the register during that spike of time.
This patch introduces an additional check to ignore this condition
since the VF is in reset.

Fixes: 19b73d8efaa4 ("i40evf: Add additional check for reset")
Signed-off-by: Surabhi Boob <surabhi.boob@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/iavf/iavf_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index 6f6cd013eef3e..484c2a6f1625d 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -2341,7 +2341,7 @@ static void iavf_adminq_task(struct work_struct *work)
 
 	/* check for error indications */
 	val = rd32(hw, hw->aq.arq.len);
-	if (val == 0xdeadbeef) /* indicates device in reset */
+	if (val == 0xdeadbeef || val == 0xffffffff) /* device in reset */
 		goto freedom;
 	oldval = val;
 	if (val & IAVF_VF_ARQLEN1_ARQVFE_MASK) {
-- 
2.33.0

[PATCH 5.4 054/100] MIPS: generic/yamon-dt: fix uninitialized variable error

[Greg Kroah-Hartman]

From: Colin Ian King <colin.i.king@googlemail.com>

[ Upstream commit 255e51da15baed47531beefd02f222e4dc01f1c1 ]

In the case where fw_getenv returns an error when fetching values
for ememsizea and memsize then variable phys_memsize is not assigned
a variable and will be uninitialized on a zero check of phys_memsize.
Fix this by initializing phys_memsize to zero.

Cleans up cppcheck error:
arch/mips/generic/yamon-dt.c:100:7: error: Uninitialized variable: phys_memsize [uninitvar]

Fixes: f41d2430bbd6 ("MIPS: generic/yamon-dt: Support > 256MB of RAM")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/generic/yamon-dt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/generic/yamon-dt.c b/arch/mips/generic/yamon-dt.c
index a3aa22c77cadc..a07a5edbcda78 100644
--- a/arch/mips/generic/yamon-dt.c
+++ b/arch/mips/generic/yamon-dt.c
@@ -75,7 +75,7 @@ static unsigned int __init gen_fdt_mem_array(
 __init int yamon_dt_append_memory(void *fdt,
 				  const struct yamon_mem_region *regions)
 {
-	unsigned long phys_memsize, memsize;
+	unsigned long phys_memsize = 0, memsize;
 	__be32 mem_array[2 * MAX_MEM_ARRAY_ENTRIES];
 	unsigned int mem_entries;
 	int i, err, mem_off;
-- 
2.33.0

[PATCH 5.4 055/100] mips: bcm63xx: add support for clk_get_parent()

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit e8f67482e5a4bc8d0b65d606d08cb60ee123b468 ]

BCM63XX selects HAVE_LEGACY_CLK but does not provide/support
clk_get_parent(), so add a simple implementation of that
function so that callers of it will build without errors.

Fixes these build errors:

mips-linux-ld: drivers/iio/adc/ingenic-adc.o: in function `jz4770_adc_init_clk_div':
ingenic-adc.c:(.text+0xe4): undefined reference to `clk_get_parent'
mips-linux-ld: drivers/iio/adc/ingenic-adc.o: in function `jz4725b_adc_init_clk_div':
ingenic-adc.c:(.text+0x1b8): undefined reference to `clk_get_parent'

Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs." )
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Artur Rojek <contact@artur-rojek.eu>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: linux-mips@vger.kernel.org
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-iio@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/bcm63xx/clk.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
index 164115944a7fd..aba6e2d6a736c 100644
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -381,6 +381,12 @@ void clk_disable(struct clk *clk)
 
 EXPORT_SYMBOL(clk_disable);
 
+struct clk *clk_get_parent(struct clk *clk)
+{
+	return NULL;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
 unsigned long clk_get_rate(struct clk *clk)
 {
 	if (!clk)
-- 
2.33.0

[PATCH 5.4 056/100] mips: lantiq: add support for clk_get_parent()

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit fc1aabb088860d6cf9dd03612b7a6f0de91ccac2 ]

Provide a simple implementation of clk_get_parent() in the
lantiq subarch so that callers of it will build without errors.

Fixes this build error:
ERROR: modpost: "clk_get_parent" [drivers/iio/adc/ingenic-adc.ko] undefined!

Fixes: 171bb2f19ed6 ("MIPS: Lantiq: Add initial support for Lantiq SoCs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: linux-mips@vger.kernel.org
Cc: John Crispin <john@phrozen.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/lantiq/clk.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c
index dd819e31fcbbf..4916cccf378fd 100644
--- a/arch/mips/lantiq/clk.c
+++ b/arch/mips/lantiq/clk.c
@@ -158,6 +158,12 @@ void clk_deactivate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_deactivate);
 
+struct clk *clk_get_parent(struct clk *clk)
+{
+	return NULL;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
 static inline u32 get_counter_resolution(void)
 {
 	u32 res;
-- 
2.33.0

[PATCH 5.4 057/100] platform/x86: hp_accel: Fix an error handling path in lis3lv02d_probe()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit c961a7d2aa23ae19e0099fbcdf1040fb760eea83 ]

If 'led_classdev_register()' fails, some additional resources should be
released.

Add the missing 'i8042_remove_filter()' and 'lis3lv02d_remove_fs()' calls
that are already in the remove function but are missing here.

Fixes: a4c724d0723b ("platform: hp_accel: add a i8042 filter to remove HPQ6000 data from kb bus stream")
Fixes: 9e0c79782143 ("lis3lv02d: merge with leds hp disk")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5a4f218f8f16d2e3a7906b7ca3654ffa946895f8.1636314074.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/hp_accel.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/platform/x86/hp_accel.c b/drivers/platform/x86/hp_accel.c
index 8c0867bda8280..0dfaa1a43b674 100644
--- a/drivers/platform/x86/hp_accel.c
+++ b/drivers/platform/x86/hp_accel.c
@@ -372,9 +372,11 @@ static int lis3lv02d_add(struct acpi_device *device)
 	INIT_WORK(&hpled_led.work, delayed_set_status_worker);
 	ret = led_classdev_register(NULL, &hpled_led.led_classdev);
 	if (ret) {
+		i8042_remove_filter(hp_accel_i8042_filter);
 		lis3lv02d_joystick_disable(&lis3_dev);
 		lis3lv02d_poweroff(&lis3_dev);
 		flush_work(&hpled_led.work);
+		lis3lv02d_remove_fs(&lis3_dev);
 		return ret;
 	}
 
-- 
2.33.0

[PATCH 5.4 058/100] scsi: core: sysfs: Fix hang when device state is set via sysfs

[Greg Kroah-Hartman]

From: Mike Christie <michael.christie@oracle.com>

[ Upstream commit 4edd8cd4e86dd3047e5294bbefcc0a08f66a430f ]

This fixes a regression added with:

commit f0f82e2476f6 ("scsi: core: Fix capacity set to zero after
offlinining device")

The problem is that after iSCSI recovery, iscsid will call into the kernel
to set the dev's state to running, and with that patch we now call
scsi_rescan_device() with the state_mutex held. If the SCSI error handler
thread is just starting to test the device in scsi_send_eh_cmnd() then it's
going to try to grab the state_mutex.

We are then stuck, because when scsi_rescan_device() tries to send its I/O
scsi_queue_rq() calls -> scsi_host_queue_ready() -> scsi_host_in_recovery()
which will return true (the host state is still in recovery) and I/O will
just be requeued. scsi_send_eh_cmnd() will then never be able to grab the
state_mutex to finish error handling.

To prevent the deadlock move the rescan-related code to after we drop the
state_mutex.

This also adds a check for if we are already in the running state. This
prevents extra scans and helps the iscsid case where if the transport class
has already onlined the device during its recovery process then we don't
need userspace to do it again plus possibly block that daemon.

Link: https://lore.kernel.org/r/20211105221048.6541-3-michael.christie@oracle.com
Fixes: f0f82e2476f6 ("scsi: core: Fix capacity set to zero after offlinining device")
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: lijinlin <lijinlin3@huawei.com>
Cc: Wu Bo <wubo40@huawei.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_sysfs.c | 30 +++++++++++++++++++-----------
 1 file changed, 19 insertions(+), 11 deletions(-)

diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 12064ce76777d..16432d42a50aa 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -776,6 +776,7 @@ store_state_field(struct device *dev, struct device_attribute *attr,
 	int i, ret;
 	struct scsi_device *sdev = to_scsi_device(dev);
 	enum scsi_device_state state = 0;
+	bool rescan_dev = false;
 
 	for (i = 0; i < ARRAY_SIZE(sdev_states); i++) {
 		const int len = strlen(sdev_states[i].name);
@@ -794,20 +795,27 @@ store_state_field(struct device *dev, struct device_attribute *attr,
 	}
 
 	mutex_lock(&sdev->state_mutex);
-	ret = scsi_device_set_state(sdev, state);
-	/*
-	 * If the device state changes to SDEV_RUNNING, we need to
-	 * run the queue to avoid I/O hang, and rescan the device
-	 * to revalidate it. Running the queue first is necessary
-	 * because another thread may be waiting inside
-	 * blk_mq_freeze_queue_wait() and because that call may be
-	 * waiting for pending I/O to finish.
-	 */
-	if (ret == 0 && state == SDEV_RUNNING) {
+	if (sdev->sdev_state == SDEV_RUNNING && state == SDEV_RUNNING) {
+		ret = count;
+	} else {
+		ret = scsi_device_set_state(sdev, state);
+		if (ret == 0 && state == SDEV_RUNNING)
+			rescan_dev = true;
+	}
+	mutex_unlock(&sdev->state_mutex);
+
+	if (rescan_dev) {
+		/*
+		 * If the device state changes to SDEV_RUNNING, we need to
+		 * run the queue to avoid I/O hang, and rescan the device
+		 * to revalidate it. Running the queue first is necessary
+		 * because another thread may be waiting inside
+		 * blk_mq_freeze_queue_wait() and because that call may be
+		 * waiting for pending I/O to finish.
+		 */
 		blk_mq_run_hw_queues(sdev->request_queue, true);
 		scsi_rescan_device(dev);
 	}
-	mutex_unlock(&sdev->state_mutex);
 
 	return ret == 0 ? count : -EINVAL;
 }
-- 
2.33.0

[PATCH 5.4 059/100] net: sched: act_mirred: drop dst for the direction from egress to ingress

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit f799ada6bf2397c351220088b9b0980125c77280 ]

Without dropping dst, the packets sent from local mirred/redirected
to ingress will may still use the old dst. ip_rcv() will drop it as
the old dst is for output and its .input is dst_discard.

This patch is to fix by also dropping dst for those packets that are
mirred or redirected from egress to ingress in act_mirred.

Note that we don't drop it for the direction change from ingress to
egress, as on which there might be a user case attaching a metadata
dst by act_tunnel_key that would be used later.

Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/act_mirred.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c
index e3ff884a48c56..b87d2a1ee0b16 100644
--- a/net/sched/act_mirred.c
+++ b/net/sched/act_mirred.c
@@ -19,6 +19,7 @@
 #include <linux/if_arp.h>
 #include <net/net_namespace.h>
 #include <net/netlink.h>
+#include <net/dst.h>
 #include <net/pkt_sched.h>
 #include <net/pkt_cls.h>
 #include <linux/tc_act/tc_mirred.h>
@@ -218,6 +219,7 @@ static int tcf_mirred_act(struct sk_buff *skb, const struct tc_action *a,
 	bool want_ingress;
 	bool is_redirect;
 	bool expects_nh;
+	bool at_ingress;
 	int m_eaction;
 	int mac_len;
 	bool at_nh;
@@ -253,7 +255,8 @@ static int tcf_mirred_act(struct sk_buff *skb, const struct tc_action *a,
 	 * ingress - that covers the TC S/W datapath.
 	 */
 	is_redirect = tcf_mirred_is_act_redirect(m_eaction);
-	use_reinsert = skb_at_tc_ingress(skb) && is_redirect &&
+	at_ingress = skb_at_tc_ingress(skb);
+	use_reinsert = at_ingress && is_redirect &&
 		       tcf_mirred_can_reinsert(retval);
 	if (!use_reinsert) {
 		skb2 = skb_clone(skb, GFP_ATOMIC);
@@ -261,10 +264,12 @@ static int tcf_mirred_act(struct sk_buff *skb, const struct tc_action *a,
 			goto out;
 	}
 
+	want_ingress = tcf_mirred_act_wants_ingress(m_eaction);
+
 	/* All mirred/redirected skbs should clear previous ct info */
 	nf_reset_ct(skb2);
-
-	want_ingress = tcf_mirred_act_wants_ingress(m_eaction);
+	if (want_ingress && !at_ingress) /* drop dst for egress -> ingress */
+		skb_dst_drop(skb2);
 
 	expects_nh = want_ingress || !m_mac_header_xmit;
 	at_nh = skb->data == skb_network_header(skb);
-- 
2.33.0

[PATCH 5.4 060/100] net: dpaa2-eth: fix use-after-free in dpaa2_eth_remove

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

[ Upstream commit 9b5a333272a48c2f8b30add7a874e46e8b26129c ]

Access to netdev after free_netdev() will cause use-after-free bug.
Move debug log before free_netdev() call to avoid it.

Fixes: 7472dd9f6499 ("staging: fsl-dpaa2/eth: Move print message")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
index 7af7cc7c8669a..34540e604f748 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
@@ -3616,10 +3616,10 @@ static int dpaa2_eth_remove(struct fsl_mc_device *ls_dev)
 
 	fsl_mc_portal_free(priv->mc_io);
 
-	free_netdev(net_dev);
-
 	dev_dbg(net_dev->dev.parent, "Removed interface %s\n", net_dev->name);
 
+	free_netdev(net_dev);
+
 	return 0;
 }
 
-- 
2.33.0

[PATCH 5.4 061/100] net: virtio_net_hdr_to_skb: count transport header in UFO

[Greg Kroah-Hartman]

From: Jonathan Davies <jonathan.davies@nutanix.com>

[ Upstream commit cf9acc90c80ecbee00334aa85d92f4e74014bcff ]

virtio_net_hdr_to_skb does not set the skb's gso_size and gso_type
correctly for UFO packets received via virtio-net that are a little over
the GSO size. This can lead to problems elsewhere in the networking
stack, e.g. ovs_vport_send dropping over-sized packets if gso_size is
not set.

This is due to the comparison

  if (skb->len - p_off > gso_size)

not properly accounting for the transport layer header.

p_off includes the size of the transport layer header (thlen), so
skb->len - p_off is the size of the TCP/UDP payload.

gso_size is read from the virtio-net header. For UFO, fragmentation
happens at the IP level so does not need to include the UDP header.

Hence the calculation could be comparing a TCP/UDP payload length with
an IP payload length, causing legitimate virtio-net packets to have
lack gso_type/gso_size information.

Example: a UDP packet with payload size 1473 has IP payload size 1481.
If the guest used UFO, it is not fragmented and the virtio-net header's
flags indicate that it is a GSO frame (VIRTIO_NET_HDR_GSO_UDP), with
gso_size = 1480 for an MTU of 1500.  skb->len will be 1515 and p_off
will be 42, so skb->len - p_off = 1473.  Hence the comparison fails, and
shinfo->gso_size and gso_type are not set as they should be.

Instead, add the UDP header length before comparing to gso_size when
using UFO. In this way, it is the size of the IP payload that is
compared to gso_size.

Fixes: 6dd912f82680 ("net: check untrusted gso_size at kernel entry")
Signed-off-by: Jonathan Davies <jonathan.davies@nutanix.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/virtio_net.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index b465f8f3e554f..04e87f4b9417c 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -120,10 +120,15 @@ retry:
 
 	if (hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) {
 		u16 gso_size = __virtio16_to_cpu(little_endian, hdr->gso_size);
+		unsigned int nh_off = p_off;
 		struct skb_shared_info *shinfo = skb_shinfo(skb);
 
+		/* UFO may not include transport header in gso_size. */
+		if (gso_type & SKB_GSO_UDP)
+			nh_off -= thlen;
+
 		/* Too small packets are not really GSO ones. */
-		if (skb->len - p_off > gso_size) {
+		if (skb->len - nh_off > gso_size) {
 			shinfo->gso_size = gso_size;
 			shinfo->gso_type = gso_type;
 
-- 
2.33.0

[PATCH 5.4 062/100] i40e: Fix correct max_pkt_size on VF RX queue

[Greg Kroah-Hartman]

From: Eryk Rybak <eryk.roch.rybak@intel.com>

[ Upstream commit 6afbd7b3c53cb7417189f476e99d431daccb85b0 ]

Setting VLAN port increasing RX queue max_pkt_size
by 4 bytes to take VLAN tag into account.
Trigger the VF reset when setting port VLAN for
VF to renegotiate its capabilities and reinitialize.

Fixes: ba4e003d29c1 ("i40e: don't hold spinlock while resetting VF")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/intel/i40e/i40e_virtchnl_pf.c    | 53 ++++---------------
 1 file changed, 9 insertions(+), 44 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index e561073054865..16641c19b7f73 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -621,14 +621,13 @@ static int i40e_config_vsi_rx_queue(struct i40e_vf *vf, u16 vsi_id,
 				    u16 vsi_queue_id,
 				    struct virtchnl_rxq_info *info)
 {
+	u16 pf_queue_id = i40e_vc_get_pf_queue_id(vf, vsi_id, vsi_queue_id);
 	struct i40e_pf *pf = vf->pf;
+	struct i40e_vsi *vsi = pf->vsi[vf->lan_vsi_idx];
 	struct i40e_hw *hw = &pf->hw;
 	struct i40e_hmc_obj_rxq rx_ctx;
-	u16 pf_queue_id;
 	int ret = 0;
 
-	pf_queue_id = i40e_vc_get_pf_queue_id(vf, vsi_id, vsi_queue_id);
-
 	/* clear the context structure first */
 	memset(&rx_ctx, 0, sizeof(struct i40e_hmc_obj_rxq));
 
@@ -666,6 +665,10 @@ static int i40e_config_vsi_rx_queue(struct i40e_vf *vf, u16 vsi_id,
 	}
 	rx_ctx.rxmax = info->max_pkt_size;
 
+	/* if port VLAN is configured increase the max packet size */
+	if (vsi->info.pvid)
+		rx_ctx.rxmax += VLAN_HLEN;
+
 	/* enable 32bytes desc always */
 	rx_ctx.dsize = 1;
 
@@ -4050,34 +4053,6 @@ error_param:
 	return ret;
 }
 
-/**
- * i40e_vsi_has_vlans - True if VSI has configured VLANs
- * @vsi: pointer to the vsi
- *
- * Check if a VSI has configured any VLANs. False if we have a port VLAN or if
- * we have no configured VLANs. Do not call while holding the
- * mac_filter_hash_lock.
- */
-static bool i40e_vsi_has_vlans(struct i40e_vsi *vsi)
-{
-	bool have_vlans;
-
-	/* If we have a port VLAN, then the VSI cannot have any VLANs
-	 * configured, as all MAC/VLAN filters will be assigned to the PVID.
-	 */
-	if (vsi->info.pvid)
-		return false;
-
-	/* Since we don't have a PVID, we know that if the device is in VLAN
-	 * mode it must be because of a VLAN filter configured on this VSI.
-	 */
-	spin_lock_bh(&vsi->mac_filter_hash_lock);
-	have_vlans = i40e_is_vsi_in_vlan(vsi);
-	spin_unlock_bh(&vsi->mac_filter_hash_lock);
-
-	return have_vlans;
-}
-
 /**
  * i40e_ndo_set_vf_port_vlan
  * @netdev: network interface device structure
@@ -4134,19 +4109,9 @@ int i40e_ndo_set_vf_port_vlan(struct net_device *netdev, int vf_id,
 		/* duplicate request, so just return success */
 		goto error_pvid;
 
-	if (i40e_vsi_has_vlans(vsi)) {
-		dev_err(&pf->pdev->dev,
-			"VF %d has already configured VLAN filters and the administrator is requesting a port VLAN override.\nPlease unload and reload the VF driver for this change to take effect.\n",
-			vf_id);
-		/* Administrator Error - knock the VF offline until he does
-		 * the right thing by reconfiguring his network correctly
-		 * and then reloading the VF driver.
-		 */
-		i40e_vc_disable_vf(vf);
-		/* During reset the VF got a new VSI, so refresh the pointer. */
-		vsi = pf->vsi[vf->lan_vsi_idx];
-	}
-
+	i40e_vc_disable_vf(vf);
+	/* During reset the VF got a new VSI, so refresh a pointer. */
+	vsi = pf->vsi[vf->lan_vsi_idx];
 	/* Locked once because multiple functions below iterate list */
 	spin_lock_bh(&vsi->mac_filter_hash_lock);
 
-- 
2.33.0

[PATCH 5.4 063/100] i40e: Fix NULL ptr dereference on VSI filter sync

[Greg Kroah-Hartman]

From: Michal Maloszewski <michal.maloszewski@intel.com>

[ Upstream commit 37d9e304acd903a445df8208b8a13d707902dea6 ]

Remove the reason of null pointer dereference in sync VSI filters.
Added new I40E_VSI_RELEASING flag to signalize deleting and releasing
of VSI resources to sync this thread with sync filters subtask.
Without this patch it is possible to start update the VSI filter list
after VSI is removed, that's causing a kernel oops.

Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Reviewed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Reviewed-by: Witold Fijalkowski <witoldx.fijalkowski@intel.com>
Reviewed-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e.h      | 1 +
 drivers/net/ethernet/intel/i40e/i40e_main.c | 5 +++--
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index e571c6116c4b7..e7e61b9a75ecd 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -169,6 +169,7 @@ enum i40e_vsi_state_t {
 	__I40E_VSI_OVERFLOW_PROMISC,
 	__I40E_VSI_REINIT_REQUESTED,
 	__I40E_VSI_DOWN_REQUESTED,
+	__I40E_VSI_RELEASING,
 	/* This must be last as it determines the size of the BITMAP */
 	__I40E_VSI_STATE_SIZE__,
 };
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 917be10a5cf5c..dcad4a3191cb8 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2609,7 +2609,8 @@ static void i40e_sync_filters_subtask(struct i40e_pf *pf)
 
 	for (v = 0; v < pf->num_alloc_vsi; v++) {
 		if (pf->vsi[v] &&
-		    (pf->vsi[v]->flags & I40E_VSI_FLAG_FILTER_CHANGED)) {
+		    (pf->vsi[v]->flags & I40E_VSI_FLAG_FILTER_CHANGED) &&
+		    !test_bit(__I40E_VSI_RELEASING, pf->vsi[v]->state)) {
 			int ret = i40e_sync_vsi_filters(pf->vsi[v]);
 
 			if (ret) {
@@ -13388,7 +13389,7 @@ int i40e_vsi_release(struct i40e_vsi *vsi)
 		dev_info(&pf->pdev->dev, "Can't remove PF VSI\n");
 		return -ENODEV;
 	}
-
+	set_bit(__I40E_VSI_RELEASING, vsi->state);
 	uplink_seid = vsi->uplink_seid;
 	if (vsi->type != I40E_VSI_SRIOV) {
 		if (vsi->netdev_registered) {
-- 
2.33.0

[PATCH 5.4 064/100] i40e: Fix changing previously set num_queue_pairs for PFs

[Greg Kroah-Hartman]

From: Eryk Rybak <eryk.roch.rybak@intel.com>

[ Upstream commit d2a69fefd75683004ffe87166de5635b3267ee07 ]

Currently, the i40e_vsi_setup_queue_map is basing the count of queues in
TCs on a VSI's alloc_queue_pairs member which is not changed throughout
any user's action (for example via ethtool's set_channels callback).

This implies that vsi->tc_config.tc_info[n].qcount value that is given
to the kernel via netdev_set_tc_queue() that notifies about the count of
queues per particular traffic class is constant even if user has changed
the total count of queues.

This in turn caused the kernel warning after setting the queue count to
the lower value than the initial one:

$ ethtool -l ens801f0
Channel parameters for ens801f0:
Pre-set maximums:
RX:             0
TX:             0
Other:          1
Combined:       64
Current hardware settings:
RX:             0
TX:             0
Other:          1
Combined:       64

$ ethtool -L ens801f0 combined 40

[dmesg]
Number of in use tx queues changed invalidating tc mappings. Priority
traffic classification disabled!

Reason was that vsi->alloc_queue_pairs stayed at 64 value which was used
to set the qcount on TC0 (by default only TC0 exists so all of the
existing queues are assigned to TC0). we update the offset/qcount via
netdev_set_tc_queue() back to the old value but then the
netif_set_real_num_tx_queues() is using the vsi->num_queue_pairs as a
value which got set to 40.

Fix it by using vsi->req_queue_pairs as a queue count that will be
distributed across TCs. Do it only for non-zero values, which implies
that user actually requested the new count of queues.

For VSIs other than main, stay with the vsi->alloc_queue_pairs as we
only allow manipulating the queue count on main VSI.

Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use")
Co-developed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Co-developed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 35 ++++++++++++++-------
 1 file changed, 23 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index dcad4a3191cb8..34c453c2b22da 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -1776,6 +1776,7 @@ static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
 				     bool is_add)
 {
 	struct i40e_pf *pf = vsi->back;
+	u16 num_tc_qps = 0;
 	u16 sections = 0;
 	u8 netdev_tc = 0;
 	u16 numtc = 1;
@@ -1783,13 +1784,29 @@ static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
 	u8 offset;
 	u16 qmap;
 	int i;
-	u16 num_tc_qps = 0;
 
 	sections = I40E_AQ_VSI_PROP_QUEUE_MAP_VALID;
 	offset = 0;
 
+	if (vsi->type == I40E_VSI_MAIN) {
+		/* This code helps add more queue to the VSI if we have
+		 * more cores than RSS can support, the higher cores will
+		 * be served by ATR or other filters. Furthermore, the
+		 * non-zero req_queue_pairs says that user requested a new
+		 * queue count via ethtool's set_channels, so use this
+		 * value for queues distribution across traffic classes
+		 */
+		if (vsi->req_queue_pairs > 0)
+			vsi->num_queue_pairs = vsi->req_queue_pairs;
+		else if (pf->flags & I40E_FLAG_MSIX_ENABLED)
+			vsi->num_queue_pairs = pf->num_lan_msix;
+	}
+
 	/* Number of queues per enabled TC */
-	num_tc_qps = vsi->alloc_queue_pairs;
+	if (vsi->type == I40E_VSI_MAIN)
+		num_tc_qps = vsi->num_queue_pairs;
+	else
+		num_tc_qps = vsi->alloc_queue_pairs;
 	if (enabled_tc && (vsi->back->flags & I40E_FLAG_DCB_ENABLED)) {
 		/* Find numtc from enabled TC bitmap */
 		for (i = 0, numtc = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
@@ -1867,16 +1884,10 @@ static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
 		}
 		ctxt->info.tc_mapping[i] = cpu_to_le16(qmap);
 	}
-
-	/* Set actual Tx/Rx queue pairs */
-	vsi->num_queue_pairs = offset;
-	if ((vsi->type == I40E_VSI_MAIN) && (numtc == 1)) {
-		if (vsi->req_queue_pairs > 0)
-			vsi->num_queue_pairs = vsi->req_queue_pairs;
-		else if (pf->flags & I40E_FLAG_MSIX_ENABLED)
-			vsi->num_queue_pairs = pf->num_lan_msix;
-	}
-
+	/* Do not change previously set num_queue_pairs for PFs */
+	if ((vsi->type == I40E_VSI_MAIN && numtc != 1) ||
+	    vsi->type != I40E_VSI_MAIN)
+		vsi->num_queue_pairs = offset;
 	/* Scheduler section valid can only be set for ADD VSI */
 	if (is_add) {
 		sections |= I40E_AQ_VSI_PROP_SCHED_VALID;
-- 
2.33.0

[PATCH 5.4 065/100] i40e: Fix ping is lost after configuring ADq on VF

[Greg Kroah-Hartman]

From: Eryk Rybak <eryk.roch.rybak@intel.com>

[ Upstream commit 9e0a603cb7dce2a19d98116d42de84b6db26d716 ]

Properly reconfigure VF VSIs after VF request ADQ.
Created new function to update queue mapping and queue pairs per TC
with AQ update VSI. This sets proper RSS size on NIC.
VFs num_queue_pairs should not be changed during setup of queue maps.
Previously, VF main VSI in ADQ had configured too many queues and had
wrong RSS size, which lead to packets not being consumed and drops in
connectivity.

Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use")
Co-developed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e.h        |  1 +
 drivers/net/ethernet/intel/i40e/i40e_main.c   | 64 ++++++++++++++++++-
 .../ethernet/intel/i40e/i40e_virtchnl_pf.c    | 17 +++--
 3 files changed, 74 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index e7e61b9a75ecd..f8422dbfd54e6 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -1147,6 +1147,7 @@ void i40e_ptp_save_hw_time(struct i40e_pf *pf);
 void i40e_ptp_restore_hw_time(struct i40e_pf *pf);
 void i40e_ptp_init(struct i40e_pf *pf);
 void i40e_ptp_stop(struct i40e_pf *pf);
+int i40e_update_adq_vsi_queues(struct i40e_vsi *vsi, int vsi_offset);
 int i40e_is_vsi_uplink_mode_veb(struct i40e_vsi *vsi);
 i40e_status i40e_get_partition_bw_setting(struct i40e_pf *pf);
 i40e_status i40e_set_partition_bw_setting(struct i40e_pf *pf);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 34c453c2b22da..5dbbb87423a52 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -1787,6 +1787,8 @@ static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
 
 	sections = I40E_AQ_VSI_PROP_QUEUE_MAP_VALID;
 	offset = 0;
+	/* zero out queue mapping, it will get updated on the end of the function */
+	memset(ctxt->info.queue_mapping, 0, sizeof(ctxt->info.queue_mapping));
 
 	if (vsi->type == I40E_VSI_MAIN) {
 		/* This code helps add more queue to the VSI if we have
@@ -1803,10 +1805,12 @@ static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
 	}
 
 	/* Number of queues per enabled TC */
-	if (vsi->type == I40E_VSI_MAIN)
+	if (vsi->type == I40E_VSI_MAIN ||
+	    (vsi->type == I40E_VSI_SRIOV && vsi->num_queue_pairs != 0))
 		num_tc_qps = vsi->num_queue_pairs;
 	else
 		num_tc_qps = vsi->alloc_queue_pairs;
+
 	if (enabled_tc && (vsi->back->flags & I40E_FLAG_DCB_ENABLED)) {
 		/* Find numtc from enabled TC bitmap */
 		for (i = 0, numtc = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
@@ -1884,10 +1888,12 @@ static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
 		}
 		ctxt->info.tc_mapping[i] = cpu_to_le16(qmap);
 	}
-	/* Do not change previously set num_queue_pairs for PFs */
+	/* Do not change previously set num_queue_pairs for PFs and VFs*/
 	if ((vsi->type == I40E_VSI_MAIN && numtc != 1) ||
-	    vsi->type != I40E_VSI_MAIN)
+	    (vsi->type == I40E_VSI_SRIOV && vsi->num_queue_pairs == 0) ||
+	    (vsi->type != I40E_VSI_MAIN && vsi->type != I40E_VSI_SRIOV))
 		vsi->num_queue_pairs = offset;
+
 	/* Scheduler section valid can only be set for ADD VSI */
 	if (is_add) {
 		sections |= I40E_AQ_VSI_PROP_SCHED_VALID;
@@ -5383,6 +5389,58 @@ static void i40e_vsi_update_queue_map(struct i40e_vsi *vsi,
 	       sizeof(vsi->info.tc_mapping));
 }
 
+/**
+ * i40e_update_adq_vsi_queues - update queue mapping for ADq VSI
+ * @vsi: the VSI being reconfigured
+ * @vsi_offset: offset from main VF VSI
+ */
+int i40e_update_adq_vsi_queues(struct i40e_vsi *vsi, int vsi_offset)
+{
+	struct i40e_vsi_context ctxt = {};
+	struct i40e_pf *pf;
+	struct i40e_hw *hw;
+	int ret;
+
+	if (!vsi)
+		return I40E_ERR_PARAM;
+	pf = vsi->back;
+	hw = &pf->hw;
+
+	ctxt.seid = vsi->seid;
+	ctxt.pf_num = hw->pf_id;
+	ctxt.vf_num = vsi->vf_id + hw->func_caps.vf_base_id + vsi_offset;
+	ctxt.uplink_seid = vsi->uplink_seid;
+	ctxt.connection_type = I40E_AQ_VSI_CONN_TYPE_NORMAL;
+	ctxt.flags = I40E_AQ_VSI_TYPE_VF;
+	ctxt.info = vsi->info;
+
+	i40e_vsi_setup_queue_map(vsi, &ctxt, vsi->tc_config.enabled_tc,
+				 false);
+	if (vsi->reconfig_rss) {
+		vsi->rss_size = min_t(int, pf->alloc_rss_size,
+				      vsi->num_queue_pairs);
+		ret = i40e_vsi_config_rss(vsi);
+		if (ret) {
+			dev_info(&pf->pdev->dev, "Failed to reconfig rss for num_queues\n");
+			return ret;
+		}
+		vsi->reconfig_rss = false;
+	}
+
+	ret = i40e_aq_update_vsi_params(hw, &ctxt, NULL);
+	if (ret) {
+		dev_info(&pf->pdev->dev, "Update vsi config failed, err %s aq_err %s\n",
+			 i40e_stat_str(hw, ret),
+			 i40e_aq_str(hw, hw->aq.asq_last_status));
+		return ret;
+	}
+	/* update the local VSI info with updated queue map */
+	i40e_vsi_update_queue_map(vsi, &ctxt);
+	vsi->info.valid_sections = 0;
+
+	return ret;
+}
+
 /**
  * i40e_vsi_config_tc - Configure VSI Tx Scheduler for given TC map
  * @vsi: VSI to be configured
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 16641c19b7f73..6e61aea42a0dd 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -2100,11 +2100,12 @@ static int i40e_vc_config_queues_msg(struct i40e_vf *vf, u8 *msg)
 	struct virtchnl_vsi_queue_config_info *qci =
 	    (struct virtchnl_vsi_queue_config_info *)msg;
 	struct virtchnl_queue_pair_info *qpi;
-	struct i40e_pf *pf = vf->pf;
 	u16 vsi_id, vsi_queue_id = 0;
-	u16 num_qps_all = 0;
+	struct i40e_pf *pf = vf->pf;
 	i40e_status aq_ret = 0;
 	int i, j = 0, idx = 0;
+	struct i40e_vsi *vsi;
+	u16 num_qps_all = 0;
 
 	if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states)) {
 		aq_ret = I40E_ERR_PARAM;
@@ -2193,9 +2194,15 @@ static int i40e_vc_config_queues_msg(struct i40e_vf *vf, u8 *msg)
 		pf->vsi[vf->lan_vsi_idx]->num_queue_pairs =
 			qci->num_queue_pairs;
 	} else {
-		for (i = 0; i < vf->num_tc; i++)
-			pf->vsi[vf->ch[i].vsi_idx]->num_queue_pairs =
-			       vf->ch[i].num_qps;
+		for (i = 0; i < vf->num_tc; i++) {
+			vsi = pf->vsi[vf->ch[i].vsi_idx];
+			vsi->num_queue_pairs = vf->ch[i].num_qps;
+
+			if (i40e_update_adq_vsi_queues(vsi, i)) {
+				aq_ret = I40E_ERR_CONFIG;
+				goto error_param;
+			}
+		}
 	}
 
 error_param:
-- 
2.33.0

[PATCH 5.4 066/100] i40e: Fix creation of first queue by omitting it if is not power of two

[Greg Kroah-Hartman]

From: Jedrzej Jagielski <jedrzej.jagielski@intel.com>

[ Upstream commit 2e6d218c1ec6fb9cd70693b78134cbc35ae0b5a9 ]

Reject TCs creation with proper message if the first queue
assignment is not equal to the power of two.
The first queue number was checked too late in the second queue
iteration, if second queue was configured at all. Now if first queue value
is not a power of two, then trying to create qdisc will be rejected.

Fixes: 8f88b3034db3 ("i40e: Add infrastructure for queue channel support")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 59 +++++++--------------
 1 file changed, 19 insertions(+), 40 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 5dbbb87423a52..d87771403b578 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -5731,24 +5731,6 @@ static void i40e_remove_queue_channels(struct i40e_vsi *vsi)
 	INIT_LIST_HEAD(&vsi->ch_list);
 }
 
-/**
- * i40e_is_any_channel - channel exist or not
- * @vsi: ptr to VSI to which channels are associated with
- *
- * Returns true or false if channel(s) exist for associated VSI or not
- **/
-static bool i40e_is_any_channel(struct i40e_vsi *vsi)
-{
-	struct i40e_channel *ch, *ch_tmp;
-
-	list_for_each_entry_safe(ch, ch_tmp, &vsi->ch_list, list) {
-		if (ch->initialized)
-			return true;
-	}
-
-	return false;
-}
-
 /**
  * i40e_get_max_queues_for_channel
  * @vsi: ptr to VSI to which channels are associated with
@@ -6256,26 +6238,15 @@ int i40e_create_queue_channel(struct i40e_vsi *vsi,
 	/* By default we are in VEPA mode, if this is the first VF/VMDq
 	 * VSI to be added switch to VEB mode.
 	 */
-	if ((!(pf->flags & I40E_FLAG_VEB_MODE_ENABLED)) ||
-	    (!i40e_is_any_channel(vsi))) {
-		if (!is_power_of_2(vsi->tc_config.tc_info[0].qcount)) {
-			dev_dbg(&pf->pdev->dev,
-				"Failed to create channel. Override queues (%u) not power of 2\n",
-				vsi->tc_config.tc_info[0].qcount);
-			return -EINVAL;
-		}
 
-		if (!(pf->flags & I40E_FLAG_VEB_MODE_ENABLED)) {
-			pf->flags |= I40E_FLAG_VEB_MODE_ENABLED;
+	if (!(pf->flags & I40E_FLAG_VEB_MODE_ENABLED)) {
+		pf->flags |= I40E_FLAG_VEB_MODE_ENABLED;
 
-			if (vsi->type == I40E_VSI_MAIN) {
-				if (pf->flags & I40E_FLAG_TC_MQPRIO)
-					i40e_do_reset(pf, I40E_PF_RESET_FLAG,
-						      true);
-				else
-					i40e_do_reset_safe(pf,
-							   I40E_PF_RESET_FLAG);
-			}
+		if (vsi->type == I40E_VSI_MAIN) {
+			if (pf->flags & I40E_FLAG_TC_MQPRIO)
+				i40e_do_reset(pf, I40E_PF_RESET_FLAG, true);
+			else
+				i40e_do_reset_safe(pf, I40E_PF_RESET_FLAG);
 		}
 		/* now onwards for main VSI, number of queues will be value
 		 * of TC0's queue count
@@ -7567,12 +7538,20 @@ config_tc:
 			    vsi->seid);
 		need_reset = true;
 		goto exit;
-	} else {
-		dev_info(&vsi->back->pdev->dev,
-			 "Setup channel (id:%u) utilizing num_queues %d\n",
-			 vsi->seid, vsi->tc_config.tc_info[0].qcount);
+	} else if (enabled_tc &&
+		   (!is_power_of_2(vsi->tc_config.tc_info[0].qcount))) {
+		netdev_info(netdev,
+			    "Failed to create channel. Override queues (%u) not power of 2\n",
+			    vsi->tc_config.tc_info[0].qcount);
+		ret = -EINVAL;
+		need_reset = true;
+		goto exit;
 	}
 
+	dev_info(&vsi->back->pdev->dev,
+		 "Setup channel (id:%u) utilizing num_queues %d\n",
+		 vsi->seid, vsi->tc_config.tc_info[0].qcount);
+
 	if (pf->flags & I40E_FLAG_TC_MQPRIO) {
 		if (vsi->mqprio_qopt.max_rate[0]) {
 			u64 max_tx_rate = vsi->mqprio_qopt.max_rate[0];
-- 
2.33.0

[PATCH 5.4 067/100] i40e: Fix display error code in dmesg

[Greg Kroah-Hartman]

From: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>

[ Upstream commit 5aff430d4e33a0b48a6b3d5beb06f79da23f9916 ]

Fix misleading display error in dmesg if tc filter return fail.
Only i40e status error code should be converted to string, not linux
error code. Otherwise, we return false information about the error.

Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index d87771403b578..ce237da003ddb 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -8116,9 +8116,8 @@ static int i40e_configure_clsflower(struct i40e_vsi *vsi,
 		err = i40e_add_del_cloud_filter(vsi, filter, true);
 
 	if (err) {
-		dev_err(&pf->pdev->dev,
-			"Failed to add cloud filter, err %s\n",
-			i40e_stat_str(&pf->hw, err));
+		dev_err(&pf->pdev->dev, "Failed to add cloud filter, err %d\n",
+			err);
 		goto err;
 	}
 
-- 
2.33.0

[PATCH 5.4 068/100] NFC: reorganize the functions in nci_request

[Greg Kroah-Hartman]

From: Lin Ma <linma@zju.edu.cn>

[ Upstream commit 86cdf8e38792545161dbe3350a7eced558ba4d15 ]

There is a possible data race as shown below:

thread-A in nci_request()       | thread-B in nci_close_device()
                                | mutex_lock(&ndev->req_lock);
test_bit(NCI_UP, &ndev->flags); |
...                             | test_and_clear_bit(NCI_UP, &ndev->flags)
mutex_lock(&ndev->req_lock);    |
                                |

This race will allow __nci_request() to be awaked while the device is
getting removed.

Similar to commit e2cb6b891ad2 ("bluetooth: eliminate the potential race
condition when removing the HCI controller"). this patch alters the
function sequence in nci_request() to prevent the data races between the
nci_close_device().

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation")
Link: https://lore.kernel.org/r/20211115145600.8320-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/nfc/nci/core.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/net/nfc/nci/core.c b/net/nfc/nci/core.c
index 6a34a0a786eaa..1d0aa9e6044bf 100644
--- a/net/nfc/nci/core.c
+++ b/net/nfc/nci/core.c
@@ -144,12 +144,15 @@ inline int nci_request(struct nci_dev *ndev,
 {
 	int rc;
 
-	if (!test_bit(NCI_UP, &ndev->flags))
-		return -ENETDOWN;
-
 	/* Serialize all requests */
 	mutex_lock(&ndev->req_lock);
-	rc = __nci_request(ndev, req, opt, timeout);
+	/* check the state after obtaing the lock against any races
+	 * from nci_close_device when the device gets removed.
+	 */
+	if (test_bit(NCI_UP, &ndev->flags))
+		rc = __nci_request(ndev, req, opt, timeout);
+	else
+		rc = -ENETDOWN;
 	mutex_unlock(&ndev->req_lock);
 
 	return rc;
-- 
2.33.0

[PATCH 5.4 069/100] drm/nouveau: hdmigv100.c: fix corrupted HDMI Vendor InfoFrame

[Greg Kroah-Hartman]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit 3cc1ae1fa70ab369e4645e38ce335a19438093ad ]

gv100_hdmi_ctrl() writes vendor_infoframe.subpack0_high to 0x6f0110, and
then overwrites it with 0. Just drop the overwrite with 0, that's clearly
a mistake.

Because of this issue the HDMI VIC is 0 instead of 1 in the HDMI Vendor
InfoFrame when transmitting 4kp30.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 290ffeafcc1a ("drm/nouveau/disp/gv100: initial support")
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3d3bd0f7-c150-2479-9350-35d394ee772d@xs4all.nl
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nvkm/engine/disp/hdmigv100.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/hdmigv100.c b/drivers/gpu/drm/nouveau/nvkm/engine/disp/hdmigv100.c
index 6e3c450eaacef..3ff49344abc77 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/hdmigv100.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/hdmigv100.c
@@ -62,7 +62,6 @@ gv100_hdmi_ctrl(struct nvkm_ior *ior, int head, bool enable, u8 max_ac_packet,
 		nvkm_wr32(device, 0x6f0108 + hdmi, vendor_infoframe.header);
 		nvkm_wr32(device, 0x6f010c + hdmi, vendor_infoframe.subpack0_low);
 		nvkm_wr32(device, 0x6f0110 + hdmi, vendor_infoframe.subpack0_high);
-		nvkm_wr32(device, 0x6f0110 + hdmi, 0x00000000);
 		nvkm_wr32(device, 0x6f0114 + hdmi, 0x00000000);
 		nvkm_wr32(device, 0x6f0118 + hdmi, 0x00000000);
 		nvkm_wr32(device, 0x6f011c + hdmi, 0x00000000);
-- 
2.33.0

[PATCH 5.4 070/100] NFC: reorder the logic in nfc_{un,}register_device

[Greg Kroah-Hartman]

From: Lin Ma <linma@zju.edu.cn>

[ Upstream commit 3e3b5dfcd16a3e254aab61bd1e8c417dd4503102 ]

There is a potential UAF between the unregistration routine and the NFC
netlink operations.

The race that cause that UAF can be shown as below:

 (FREE)                      |  (USE)
nfcmrvl_nci_unregister_dev   |  nfc_genl_dev_up
  nci_close_device           |
  nci_unregister_device      |    nfc_get_device
    nfc_unregister_device    |    nfc_dev_up
      rfkill_destory         |
      device_del             |      rfkill_blocked
  ...                        |    ...

The root cause for this race is concluded below:
1. The rfkill_blocked (USE) in nfc_dev_up is supposed to be placed after
the device_is_registered check.
2. Since the netlink operations are possible just after the device_add
in nfc_register_device, the nfc_dev_up() can happen anywhere during the
rfkill creation process, which leads to data race.

This patch reorder these actions to permit
1. Once device_del is finished, the nfc_dev_up cannot dereference the
rfkill object.
2. The rfkill_register need to be placed after the device_add of nfc_dev
because the parent device need to be created first. So this patch keeps
the order but inject device_lock to prevent the data race.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Fixes: be055b2f89b5 ("NFC: RFKILL support")
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211116152652.19217-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/nfc/core.c | 32 ++++++++++++++++++--------------
 1 file changed, 18 insertions(+), 14 deletions(-)

diff --git a/net/nfc/core.c b/net/nfc/core.c
index c5f9c3ee82f8e..e752692d36802 100644
--- a/net/nfc/core.c
+++ b/net/nfc/core.c
@@ -94,13 +94,13 @@ int nfc_dev_up(struct nfc_dev *dev)
 
 	device_lock(&dev->dev);
 
-	if (dev->rfkill && rfkill_blocked(dev->rfkill)) {
-		rc = -ERFKILL;
+	if (!device_is_registered(&dev->dev)) {
+		rc = -ENODEV;
 		goto error;
 	}
 
-	if (!device_is_registered(&dev->dev)) {
-		rc = -ENODEV;
+	if (dev->rfkill && rfkill_blocked(dev->rfkill)) {
+		rc = -ERFKILL;
 		goto error;
 	}
 
@@ -1118,11 +1118,7 @@ int nfc_register_device(struct nfc_dev *dev)
 	if (rc)
 		pr_err("Could not register llcp device\n");
 
-	rc = nfc_genl_device_added(dev);
-	if (rc)
-		pr_debug("The userspace won't be notified that the device %s was added\n",
-			 dev_name(&dev->dev));
-
+	device_lock(&dev->dev);
 	dev->rfkill = rfkill_alloc(dev_name(&dev->dev), &dev->dev,
 				   RFKILL_TYPE_NFC, &nfc_rfkill_ops, dev);
 	if (dev->rfkill) {
@@ -1131,6 +1127,12 @@ int nfc_register_device(struct nfc_dev *dev)
 			dev->rfkill = NULL;
 		}
 	}
+	device_unlock(&dev->dev);
+
+	rc = nfc_genl_device_added(dev);
+	if (rc)
+		pr_debug("The userspace won't be notified that the device %s was added\n",
+			 dev_name(&dev->dev));
 
 	return 0;
 }
@@ -1147,10 +1149,17 @@ void nfc_unregister_device(struct nfc_dev *dev)
 
 	pr_debug("dev_name=%s\n", dev_name(&dev->dev));
 
+	rc = nfc_genl_device_removed(dev);
+	if (rc)
+		pr_debug("The userspace won't be notified that the device %s "
+			 "was removed\n", dev_name(&dev->dev));
+
+	device_lock(&dev->dev);
 	if (dev->rfkill) {
 		rfkill_unregister(dev->rfkill);
 		rfkill_destroy(dev->rfkill);
 	}
+	device_unlock(&dev->dev);
 
 	if (dev->ops->check_presence) {
 		device_lock(&dev->dev);
@@ -1160,11 +1169,6 @@ void nfc_unregister_device(struct nfc_dev *dev)
 		cancel_work_sync(&dev->check_pres_work);
 	}
 
-	rc = nfc_genl_device_removed(dev);
-	if (rc)
-		pr_debug("The userspace won't be notified that the device %s "
-			 "was removed\n", dev_name(&dev->dev));
-
 	nfc_llcp_unregister_device(dev);
 
 	mutex_lock(&nfc_devlist_mutex);
-- 
2.33.0

[PATCH 5.4 071/100] perf bench: Fix two memory leaks detected with ASan

[Greg Kroah-Hartman]

From: Sohaib Mohamed <sohaib.amhmd@gmail.com>

[ Upstream commit 92723ea0f11d92496687db8c9725248e9d1e5e1d ]

ASan reports memory leaks while running:

  $ perf bench sched all

Fixes: e27454cc6352c422 ("perf bench: Add sched-messaging.c: Benchmark for scheduler and IPC mechanisms based on hackbench")
Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Russel <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pierre Gondois <pierre.gondois@arm.com>
Link: http://lore.kernel.org/lkml/20211110022012.16620-1-sohaib.amhmd@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/bench/sched-messaging.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/tools/perf/bench/sched-messaging.c b/tools/perf/bench/sched-messaging.c
index b142d87337be8..9e6e0ca6a2002 100644
--- a/tools/perf/bench/sched-messaging.c
+++ b/tools/perf/bench/sched-messaging.c
@@ -223,6 +223,8 @@ static unsigned int group(pthread_t *pth,
 		snd_ctx->out_fds[i] = fds[1];
 		if (!thread_mode)
 			close(fds[0]);
+
+		free(ctx);
 	}
 
 	/* Now we have all the fds, fork the senders */
@@ -239,6 +241,8 @@ static unsigned int group(pthread_t *pth,
 		for (i = 0; i < num_fds; i++)
 			close(snd_ctx->out_fds[i]);
 
+	free(snd_ctx);
+
 	/* Return number of children to reap */
 	return num_fds * 2;
 }
-- 
2.33.0

[PATCH 5.4 072/100] KVM: PPC: Book3S HV: Use GLOBAL_TOC for kvmppc_h_set_dabr/xdabr()

[Greg Kroah-Hartman]

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit dae581864609d36fb58855fd59880b4941ce9d14 ]

kvmppc_h_set_dabr(), and kvmppc_h_set_xdabr() which jumps into
it, need to use _GLOBAL_TOC to setup the kernel TOC pointer, because
kvmppc_h_set_dabr() uses LOAD_REG_ADDR() to load dawr_force_enable.

When called from hcall_try_real_mode() we have the kernel TOC in r2,
established near the start of kvmppc_interrupt_hv(), so there is no
issue.

But they can also be called from kvmppc_pseries_do_hcall() which is
module code, so the access ends up happening with the kvm-hv module's
r2, which will not point at dawr_force_enable and could even cause a
fault.

With the current code layout and compilers we haven't observed a fault
in practice, the load hits somewhere in kvm-hv.ko and silently returns
some bogus value.

Note that we we expect p8/p9 guests to use the DAWR, but SLOF uses
h_set_dabr() to test if sc1 works correctly, see SLOF's
lib/libhvcall/brokensc1.c.

Fixes: c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Link: https://lore.kernel.org/r/20210923151031.72408-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_hv_rmhandlers.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index f9c7326672b95..c9c6619564ffa 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -2535,7 +2535,7 @@ hcall_real_table:
 	.globl	hcall_real_table_end
 hcall_real_table_end:
 
-_GLOBAL(kvmppc_h_set_xdabr)
+_GLOBAL_TOC(kvmppc_h_set_xdabr)
 EXPORT_SYMBOL_GPL(kvmppc_h_set_xdabr)
 	andi.	r0, r5, DABRX_USER | DABRX_KERNEL
 	beq	6f
@@ -2545,7 +2545,7 @@ EXPORT_SYMBOL_GPL(kvmppc_h_set_xdabr)
 6:	li	r3, H_PARAMETER
 	blr
 
-_GLOBAL(kvmppc_h_set_dabr)
+_GLOBAL_TOC(kvmppc_h_set_dabr)
 EXPORT_SYMBOL_GPL(kvmppc_h_set_dabr)
 	li	r5, DABRX_USER | DABRX_KERNEL
 3:
-- 
2.33.0

[PATCH 5.4 073/100] perf/x86/intel/uncore: Fix filter_tid mask for CHA events on Skylake Server

[Greg Kroah-Hartman]

From: Alexander Antonov <alexander.antonov@linux.intel.com>

[ Upstream commit e324234e0aa881b7841c7c713306403e12b069ff ]

According Uncore Reference Manual: any of the CHA events may be filtered
by Thread/Core-ID by using tid modifier in CHA Filter 0 Register.
Update skx_cha_hw_config() to follow Uncore Guide.

Fixes: cd34cd97b7b4 ("perf/x86/intel/uncore: Add Skylake server uncore support")
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20211115090334.3789-2-alexander.antonov@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/uncore_snbep.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c
index 9096a1693942d..b2cc97f7c2a5c 100644
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -3479,6 +3479,9 @@ static int skx_cha_hw_config(struct intel_uncore_box *box, struct perf_event *ev
 	struct hw_perf_event_extra *reg1 = &event->hw.extra_reg;
 	struct extra_reg *er;
 	int idx = 0;
+	/* Any of the CHA events may be filtered by Thread/Core-ID.*/
+	if (event->hw.config & SNBEP_CBO_PMON_CTL_TID_EN)
+		idx = SKX_CHA_MSR_PMON_BOX_FILTER_TID;
 
 	for (er = skx_uncore_cha_extra_regs; er->msr; er++) {
 		if (er->event != (event->hw.config & er->config_mask))
-- 
2.33.0

[PATCH 5.4 074/100] perf/x86/intel/uncore: Fix IIO event constraints for Skylake Server

[Greg Kroah-Hartman]

From: Alexander Antonov <alexander.antonov@linux.intel.com>

[ Upstream commit 3866ae319c846a612109c008f43cba80b8c15e86 ]

According to the latest uncore document, COMP_BUF_OCCUPANCY (0xd5) event
can be collected on 2-3 counters. Update uncore IIO event constraints for
Skylake Server.

Fixes: cd34cd97b7b4 ("perf/x86/intel/uncore: Add Skylake server uncore support")
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20211115090334.3789-3-alexander.antonov@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/uncore_snbep.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c
index b2cc97f7c2a5c..0f61f46e6086f 100644
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -3549,6 +3549,7 @@ static struct event_constraint skx_uncore_iio_constraints[] = {
 	UNCORE_EVENT_CONSTRAINT(0xc0, 0xc),
 	UNCORE_EVENT_CONSTRAINT(0xc5, 0xc),
 	UNCORE_EVENT_CONSTRAINT(0xd4, 0xc),
+	UNCORE_EVENT_CONSTRAINT(0xd5, 0xc),
 	EVENT_CONSTRAINT_END
 };
 
-- 
2.33.0

[PATCH 5.4 075/100] s390/kexec: fix return code handling

[Greg Kroah-Hartman]

From: Heiko Carstens <hca@linux.ibm.com>

[ Upstream commit 20c76e242e7025bd355619ba67beb243ba1a1e95 ]

kexec_file_add_ipl_report ignores that ipl_report_finish may fail and
can return an error pointer instead of a valid pointer.
Fix this and simplify by returning NULL in case of an error and let
the only caller handle this case.

Fixes: 99feaa717e55 ("s390/kexec_file: Create ipl report and pass to next kernel")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/ipl.c                |    3 ++-
 arch/s390/kernel/machine_kexec_file.c |    8 +++++++-
 2 files changed, 9 insertions(+), 2 deletions(-)

--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -1783,7 +1783,7 @@ void *ipl_report_finish(struct ipl_repor
 
 	buf = vzalloc(report->size);
 	if (!buf)
-		return ERR_PTR(-ENOMEM);
+		goto out;
 	ptr = buf;
 
 	memcpy(ptr, report->ipib, report->ipib->hdr.len);
@@ -1822,6 +1822,7 @@ void *ipl_report_finish(struct ipl_repor
 	}
 
 	BUG_ON(ptr > buf + report->size);
+out:
 	return buf;
 }
 
--- a/arch/s390/kernel/machine_kexec_file.c
+++ b/arch/s390/kernel/machine_kexec_file.c
@@ -170,6 +170,7 @@ static int kexec_file_add_ipl_report(str
 	struct kexec_buf buf;
 	unsigned long addr;
 	void *ptr, *end;
+	int ret;
 
 	buf.image = image;
 
@@ -199,7 +200,10 @@ static int kexec_file_add_ipl_report(str
 		ptr += len;
 	}
 
+	ret = -ENOMEM;
 	buf.buffer = ipl_report_finish(data->report);
+	if (!buf.buffer)
+		goto out;
 	buf.bufsz = data->report->size;
 	buf.memsz = buf.bufsz;
 
@@ -209,7 +213,9 @@ static int kexec_file_add_ipl_report(str
 		data->kernel_buf + offsetof(struct lowcore, ipl_parmblock_ptr);
 	*lc_ipl_parmblock_ptr = (__u32)buf.mem;
 
-	return kexec_add_buffer(&buf);
+	ret = kexec_add_buffer(&buf);
+out:
+	return ret;
 }
 
 void *kexec_file_add_components(struct kimage *image,

[PATCH 5.4 076/100] arm64: vdso32: suppress error message for make mrproper

[Greg Kroah-Hartman]

From: Nick Desaulniers <ndesaulniers@google.com>

commit 14831fad73f5ac30ac61760487d95a538e6ab3cb upstream.

When running the following command without arm-linux-gnueabi-gcc in
one's $PATH, the following warning is observed:

$ ARCH=arm64 CROSS_COMPILE_COMPAT=arm-linux-gnueabi- make -j72 LLVM=1 mrproper
make[1]: arm-linux-gnueabi-gcc: No such file or directory

This is because KCONFIG is not run for mrproper, so CONFIG_CC_IS_CLANG
is not set, and we end up eagerly evaluating various variables that try
to invoke CC_COMPAT.

This is a similar problem to what was observed in
commit dc960bfeedb0 ("h8300: suppress error messages for 'make clean'")

Reported-by: Lucas Henneman <henneman@google.com>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211019223646.1146945-4-ndesaulniers@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/kernel/vdso32/Makefile |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/arm64/kernel/vdso32/Makefile
+++ b/arch/arm64/kernel/vdso32/Makefile
@@ -32,7 +32,8 @@ cc32-as-instr = $(call try-run,\
 # As a result we set our own flags here.
 
 # KBUILD_CPPFLAGS and NOSTDINC_FLAGS from top-level Makefile
-VDSO_CPPFLAGS := -D__KERNEL__ -nostdinc -isystem $(shell $(CC_COMPAT) -print-file-name=include)
+VDSO_CPPFLAGS := -D__KERNEL__ -nostdinc
+VDSO_CPPFLAGS += -isystem $(shell $(CC_COMPAT) -print-file-name=include 2>/dev/null)
 VDSO_CPPFLAGS += $(LINUXINCLUDE)
 
 # Common C and assembly flags

[PATCH 5.4 077/100] tun: fix bonding active backup with arp monitoring

[Greg Kroah-Hartman]

From: Nicolas Dichtel <nicolas.dichtel@6wind.com>

commit a31d27fbed5d518734cb60956303eb15089a7634 upstream.

As stated in the bonding doc, trans_start must be set manually for drivers
using NETIF_F_LLTX:
 Drivers that use NETIF_F_LLTX flag must also update
 netdev_queue->trans_start. If they do not, then the ARP monitor will
 immediately fail any slaves using that driver, and those slaves will stay
 down.

Link: https://www.kernel.org/doc/html/v5.15/networking/bonding.html#arp-monitor-operation
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/tun.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1071,6 +1071,7 @@ static netdev_tx_t tun_net_xmit(struct s
 {
 	struct tun_struct *tun = netdev_priv(dev);
 	int txq = skb->queue_mapping;
+	struct netdev_queue *queue;
 	struct tun_file *tfile;
 	int len = skb->len;
 
@@ -1117,6 +1118,10 @@ static netdev_tx_t tun_net_xmit(struct s
 	if (ptr_ring_produce(&tfile->tx_ring, skb))
 		goto drop;
 
+	/* NETIF_F_LLTX requires to do our own update of trans_start */
+	queue = netdev_get_tx_queue(dev, txq);
+	queue->trans_start = jiffies;
+
 	/* Notify and wake up reader process */
 	if (tfile->flags & TUN_FASYNC)
 		kill_fasync(&tfile->fasync, SIGIO, POLL_IN);

[PATCH 5.4 078/100] hexagon: export raw I/O routines for modules

[Greg Kroah-Hartman]

From: Nathan Chancellor <nathan@kernel.org>

commit ffb92ce826fd801acb0f4e15b75e4ddf0d189bde upstream.

Patch series "Fixes for ARCH=hexagon allmodconfig", v2.

This series fixes some issues noticed with ARCH=hexagon allmodconfig.

This patch (of 3):

When building ARCH=hexagon allmodconfig, the following errors occur:

  ERROR: modpost: "__raw_readsl" [drivers/i3c/master/svc-i3c-master.ko] undefined!
  ERROR: modpost: "__raw_writesl" [drivers/i3c/master/dw-i3c-master.ko] undefined!
  ERROR: modpost: "__raw_readsl" [drivers/i3c/master/dw-i3c-master.ko] undefined!
  ERROR: modpost: "__raw_writesl" [drivers/i3c/master/i3c-master-cdns.ko] undefined!
  ERROR: modpost: "__raw_readsl" [drivers/i3c/master/i3c-master-cdns.ko] undefined!

Export these symbols so that modules can use them without any errors.

Link: https://lkml.kernel.org/r/20211115174250.1994179-1-nathan@kernel.org
Link: https://lkml.kernel.org/r/20211115174250.1994179-2-nathan@kernel.org
Fixes: 013bf24c3829 ("Hexagon: Provide basic implementation and/or stubs for I/O routines.")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Brian Cain <bcain@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/hexagon/lib/io.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/arch/hexagon/lib/io.c
+++ b/arch/hexagon/lib/io.c
@@ -27,6 +27,7 @@ void __raw_readsw(const void __iomem *ad
 		*dst++ = *src;
 
 }
+EXPORT_SYMBOL(__raw_readsw);
 
 /*
  * __raw_writesw - read words a short at a time
@@ -47,6 +48,7 @@ void __raw_writesw(void __iomem *addr, c
 
 
 }
+EXPORT_SYMBOL(__raw_writesw);
 
 /*  Pretty sure len is pre-adjusted for the length of the access already */
 void __raw_readsl(const void __iomem *addr, void *data, int len)
@@ -62,6 +64,7 @@ void __raw_readsl(const void __iomem *ad
 
 
 }
+EXPORT_SYMBOL(__raw_readsl);
 
 void __raw_writesl(void __iomem *addr, const void *data, int len)
 {
@@ -76,3 +79,4 @@ void __raw_writesl(void __iomem *addr, c
 
 
 }
+EXPORT_SYMBOL(__raw_writesl);

[PATCH 5.4 079/100] ipc: WARN if trying to remove ipc object which is absent

[Greg Kroah-Hartman]

From: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>

commit 126e8bee943e9926238c891e2df5b5573aee76bc upstream.

Patch series "shm: shm_rmid_forced feature fixes".

Some time ago I met kernel crash after CRIU restore procedure,
fortunately, it was CRIU restore, so, I had dump files and could do
restore many times and crash reproduced easily.  After some
investigation I've constructed the minimal reproducer.  It was found
that it's use-after-free and it happens only if sysctl
kernel.shm_rmid_forced = 1.

The key of the problem is that the exit_shm() function not handles shp's
object destroy when task->sysvshm.shm_clist contains items from
different IPC namespaces.  In most cases this list will contain only
items from one IPC namespace.

How can this list contain object from different namespaces? The
exit_shm() function is designed to clean up this list always when
process leaves IPC namespace.  But we made a mistake a long time ago and
did not add a exit_shm() call into the setns() syscall procedures.

The first idea was just to add this call to setns() syscall but it
obviously changes semantics of setns() syscall and that's
userspace-visible change.  So, I gave up on this idea.

The first real attempt to address the issue was just to omit forced
destroy if we meet shp object not from current task IPC namespace [1].
But that was not the best idea because task->sysvshm.shm_clist was
protected by rwsem which belongs to current task IPC namespace.  It
means that list corruption may occur.

Second approach is just extend exit_shm() to properly handle shp's from
different IPC namespaces [2].  This is really non-trivial thing, I've
put a lot of effort into that but not believed that it's possible to
make it fully safe, clean and clear.

Thanks to the efforts of Manfred Spraul working an elegant solution was
designed.  Thanks a lot, Manfred!

Eric also suggested the way to address the issue in ("[RFC][PATCH] shm:
In shm_exit destroy all created and never attached segments") Eric's
idea was to maintain a list of shm_clists one per IPC namespace, use
lock-less lists.  But there is some extra memory consumption-related
concerns.

An alternative solution which was suggested by me was implemented in
("shm: reset shm_clist on setns but omit forced shm destroy").  The idea
is pretty simple, we add exit_shm() syscall to setns() but DO NOT
destroy shm segments even if sysctl kernel.shm_rmid_forced = 1, we just
clean up the task->sysvshm.shm_clist list.

This chages semantics of setns() syscall a little bit but in comparision
to the "naive" solution when we just add exit_shm() without any special
exclusions this looks like a safer option.

[1] https://lkml.org/lkml/2021/7/6/1108
[2] https://lkml.org/lkml/2021/7/14/736

This patch (of 2):

Let's produce a warning if we trying to remove non-existing IPC object
from IPC namespace kht/idr structures.

This allows us to catch possible bugs when the ipc_rmid() function was
called with inconsistent struct ipc_ids*, struct kern_ipc_perm*
arguments.

Link: https://lkml.kernel.org/r/20211027224348.611025-1-alexander.mikhalitsyn@virtuozzo.com
Link: https://lkml.kernel.org/r/20211027224348.611025-2-alexander.mikhalitsyn@virtuozzo.com
Co-developed-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 ipc/util.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/ipc/util.c
+++ b/ipc/util.c
@@ -446,8 +446,8 @@ static int ipcget_public(struct ipc_name
 static void ipc_kht_remove(struct ipc_ids *ids, struct kern_ipc_perm *ipcp)
 {
 	if (ipcp->key != IPC_PRIVATE)
-		rhashtable_remove_fast(&ids->key_ht, &ipcp->khtnode,
-				       ipc_kht_params);
+		WARN_ON_ONCE(rhashtable_remove_fast(&ids->key_ht, &ipcp->khtnode,
+				       ipc_kht_params));
 }
 
 /**
@@ -462,7 +462,7 @@ void ipc_rmid(struct ipc_ids *ids, struc
 {
 	int idx = ipcid_to_idx(ipcp->id);
 
-	idr_remove(&ids->ipcs_idr, idx);
+	WARN_ON_ONCE(idr_remove(&ids->ipcs_idr, idx) != ipcp);
 	ipc_kht_remove(ids, ipcp);
 	ids->in_use--;
 	ipcp->deleted = true;

[PATCH 5.4 080/100] mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag

[Greg Kroah-Hartman]

From: Rustam Kovhaev <rkovhaev@gmail.com>

commit 34dbc3aaf5d9e89ba6cc5e24add9458c21ab1950 upstream.

When kmemleak is enabled for SLOB, system does not boot and does not
print anything to the console.  At the very early stage in the boot
process we hit infinite recursion from kmemleak_init() and eventually
kernel crashes.

kmemleak_init() specifies SLAB_NOLEAKTRACE for KMEM_CACHE(), but
kmem_cache_create_usercopy() removes it because CACHE_CREATE_MASK is not
valid for SLOB.

Let's fix CACHE_CREATE_MASK and make kmemleak work with SLOB

Link: https://lkml.kernel.org/r/20211115020850.3154366-1-rkovhaev@gmail.com
Fixes: d8843922fba4 ("slab: Ignore internal flags in cache creation")
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Glauber Costa <glommer@parallels.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/slab.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/slab.h
+++ b/mm/slab.h
@@ -211,7 +211,7 @@ static inline slab_flags_t kmem_cache_fl
 #define SLAB_CACHE_FLAGS (SLAB_NOLEAKTRACE | SLAB_RECLAIM_ACCOUNT | \
 			  SLAB_TEMPORARY | SLAB_ACCOUNT)
 #else
-#define SLAB_CACHE_FLAGS (0)
+#define SLAB_CACHE_FLAGS (SLAB_NOLEAKTRACE)
 #endif
 
 /* Common flags available with current configuration */

[PATCH 5.4 081/100] x86/hyperv: Fix NULL deref in set_hv_tscchange_cb() if Hyper-V setup fails

[Greg Kroah-Hartman]

From: Sean Christopherson <seanjc@google.com>

commit daf972118c517b91f74ff1731417feb4270625a4 upstream.

Check for a valid hv_vp_index array prior to derefencing hv_vp_index when
setting Hyper-V's TSC change callback.  If Hyper-V setup failed in
hyperv_init(), the kernel will still report that it's running under
Hyper-V, but will have silently disabled nearly all functionality.

  BUG: kernel NULL pointer dereference, address: 0000000000000010
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP
  CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc2+ #75
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  RIP: 0010:set_hv_tscchange_cb+0x15/0xa0
  Code: <8b> 04 82 8b 15 12 17 85 01 48 c1 e0 20 48 0d ee 00 01 00 f6 c6 08
  ...
  Call Trace:
   kvm_arch_init+0x17c/0x280
   kvm_init+0x31/0x330
   vmx_init+0xba/0x13a
   do_one_initcall+0x41/0x1c0
   kernel_init_freeable+0x1f2/0x23b
   kernel_init+0x16/0x120
   ret_from_fork+0x22/0x30

Fixes: 93286261de1b ("x86/hyperv: Reenlightenment notifications support")
Cc: stable@vger.kernel.org
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20211104182239.1302956-2-seanjc@google.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/hyperv/hv_init.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -163,6 +163,9 @@ void set_hv_tscchange_cb(void (*cb)(void
 		return;
 	}
 
+	if (!hv_vp_index)
+		return;
+
 	hv_reenlightenment_cb = cb;
 
 	/* Make sure callback is registered before we write to MSRs */

[PATCH 5.4 082/100] s390/kexec: fix memory leak of ipl report buffer

[Greg Kroah-Hartman]

From: Baoquan He <bhe@redhat.com>

commit 4aa9340584e37debef06fa99b56d064beb723891 upstream.

unreferenced object 0x38000195000 (size 4096):
  comm "kexec", pid 8548, jiffies 4294953647 (age 32443.270s)
  hex dump (first 32 bytes):
    00 00 00 c8 20 00 00 00 00 00 00 c0 02 80 00 00  .... ...........
    40 40 40 40 40 40 40 40 00 00 00 00 00 00 00 00  @@@@@@@@........
  backtrace:
    [<0000000011a2f199>] __vmalloc_node_range+0xc0/0x140
    [<0000000081fa2752>] vzalloc+0x5a/0x70
    [<0000000063a4c92d>] ipl_report_finish+0x2c/0x180
    [<00000000553304da>] kexec_file_add_ipl_report+0xf4/0x150
    [<00000000862d033f>] kexec_file_add_components+0x124/0x160
    [<000000000d2717bb>] arch_kexec_kernel_image_load+0x62/0x90
    [<000000002e0373b6>] kimage_file_alloc_init+0x1aa/0x2e0
    [<0000000060f2d14f>] __do_sys_kexec_file_load+0x17c/0x2c0
    [<000000008c86fe5a>] __s390x_sys_kexec_file_load+0x40/0x50
    [<000000001fdb9dac>] __do_syscall+0x1bc/0x1f0
    [<000000003ee4258d>] system_call+0x78/0xa0

Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Fixes: 99feaa717e55 ("s390/kexec_file: Create ipl report and pass to next kernel")
Cc: <stable@vger.kernel.org> # v5.2: 20c76e242e70: s390/kexec: fix return code handling
Cc: <stable@vger.kernel.org> # v5.2
Link: https://lore.kernel.org/r/20211116033101.GD21646@MiWiFi-R3L-srv
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/include/asm/kexec.h         |    6 ++++++
 arch/s390/kernel/machine_kexec_file.c |   10 ++++++++++
 2 files changed, 16 insertions(+)

--- a/arch/s390/include/asm/kexec.h
+++ b/arch/s390/include/asm/kexec.h
@@ -74,6 +74,12 @@ void *kexec_file_add_components(struct k
 int arch_kexec_do_relocs(int r_type, void *loc, unsigned long val,
 			 unsigned long addr);
 
+#define ARCH_HAS_KIMAGE_ARCH
+
+struct kimage_arch {
+	void *ipl_buf;
+};
+
 extern const struct kexec_file_ops s390_kexec_image_ops;
 extern const struct kexec_file_ops s390_kexec_elf_ops;
 
--- a/arch/s390/kernel/machine_kexec_file.c
+++ b/arch/s390/kernel/machine_kexec_file.c
@@ -12,6 +12,7 @@
 #include <linux/kexec.h>
 #include <linux/module_signature.h>
 #include <linux/verification.h>
+#include <linux/vmalloc.h>
 #include <asm/boot_data.h>
 #include <asm/ipl.h>
 #include <asm/setup.h>
@@ -206,6 +207,7 @@ static int kexec_file_add_ipl_report(str
 		goto out;
 	buf.bufsz = data->report->size;
 	buf.memsz = buf.bufsz;
+	image->arch.ipl_buf = buf.buffer;
 
 	data->memsz += buf.memsz;
 
@@ -327,3 +329,11 @@ int arch_kexec_kernel_image_probe(struct
 
 	return kexec_image_probe_default(image, buf, buf_len);
 }
+
+int arch_kimage_file_post_load_cleanup(struct kimage *image)
+{
+	vfree(image->arch.ipl_buf);
+	image->arch.ipl_buf = NULL;
+
+	return kexec_image_post_load_cleanup_default(image);
+}

[PATCH 5.4 083/100] udf: Fix crash after seekdir

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

commit a48fc69fe6588b48d878d69de223b91a386a7cb4 upstream.

udf_readdir() didn't validate the directory position it should start
reading from. Thus when user uses lseek(2) on directory file descriptor
it can trick udf_readdir() into reading from a position in the middle of
directory entry which then upsets directory parsing code resulting in
errors or even possible kernel crashes. Similarly when the directory is
modified between two readdir calls, the directory position need not be
valid anymore.

Add code to validate current offset in the directory. This is actually
rather expensive for UDF as we need to read from the beginning of the
directory and parse all directory entries. This is because in UDF a
directory is just a stream of data containing directory entries and
since file names are fully under user's control we cannot depend on
detecting magic numbers and checksums in the header of directory entry
as a malicious attacker could fake them. We skip this step if we detect
that nothing changed since the last readdir call.

Reported-by: Nathan Wilson <nate@chickenbrittle.com>
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/udf/dir.c   |   32 ++++++++++++++++++++++++++++++--
 fs/udf/namei.c |    3 +++
 fs/udf/super.c |    2 ++
 3 files changed, 35 insertions(+), 2 deletions(-)

--- a/fs/udf/dir.c
+++ b/fs/udf/dir.c
@@ -31,6 +31,7 @@
 #include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/bio.h>
+#include <linux/iversion.h>
 
 #include "udf_i.h"
 #include "udf_sb.h"
@@ -44,7 +45,7 @@ static int udf_readdir(struct file *file
 	struct fileIdentDesc *fi = NULL;
 	struct fileIdentDesc cfi;
 	udf_pblk_t block, iblock;
-	loff_t nf_pos;
+	loff_t nf_pos, emit_pos = 0;
 	int flen;
 	unsigned char *fname = NULL, *copy_name = NULL;
 	unsigned char *nameptr;
@@ -58,6 +59,7 @@ static int udf_readdir(struct file *file
 	int i, num, ret = 0;
 	struct extent_position epos = { NULL, 0, {0, 0} };
 	struct super_block *sb = dir->i_sb;
+	bool pos_valid = false;
 
 	if (ctx->pos == 0) {
 		if (!dir_emit_dot(file, ctx))
@@ -68,6 +70,21 @@ static int udf_readdir(struct file *file
 	if (nf_pos >= size)
 		goto out;
 
+	/*
+	 * Something changed since last readdir (either lseek was called or dir
+	 * changed)?  We need to verify the position correctly points at the
+	 * beginning of some dir entry so that the directory parsing code does
+	 * not get confused. Since UDF does not have any reliable way of
+	 * identifying beginning of dir entry (names are under user control),
+	 * we need to scan the directory from the beginning.
+	 */
+	if (!inode_eq_iversion(dir, file->f_version)) {
+		emit_pos = nf_pos;
+		nf_pos = 0;
+	} else {
+		pos_valid = true;
+	}
+
 	fname = kmalloc(UDF_NAME_LEN, GFP_NOFS);
 	if (!fname) {
 		ret = -ENOMEM;
@@ -123,13 +140,21 @@ static int udf_readdir(struct file *file
 
 	while (nf_pos < size) {
 		struct kernel_lb_addr tloc;
+		loff_t cur_pos = nf_pos;
 
-		ctx->pos = (nf_pos >> 2) + 1;
+		/* Update file position only if we got past the current one */
+		if (nf_pos >= emit_pos) {
+			ctx->pos = (nf_pos >> 2) + 1;
+			pos_valid = true;
+		}
 
 		fi = udf_fileident_read(dir, &nf_pos, &fibh, &cfi, &epos, &eloc,
 					&elen, &offset);
 		if (!fi)
 			goto out;
+		/* Still not at offset where user asked us to read from? */
+		if (cur_pos < emit_pos)
+			continue;
 
 		liu = le16_to_cpu(cfi.lengthOfImpUse);
 		lfi = cfi.lengthFileIdent;
@@ -187,8 +212,11 @@ static int udf_readdir(struct file *file
 	} /* end while */
 
 	ctx->pos = (nf_pos >> 2) + 1;
+	pos_valid = true;
 
 out:
+	if (pos_valid)
+		file->f_version = inode_query_iversion(dir);
 	if (fibh.sbh != fibh.ebh)
 		brelse(fibh.ebh);
 	brelse(fibh.sbh);
--- a/fs/udf/namei.c
+++ b/fs/udf/namei.c
@@ -30,6 +30,7 @@
 #include <linux/sched.h>
 #include <linux/crc-itu-t.h>
 #include <linux/exportfs.h>
+#include <linux/iversion.h>
 
 static inline int udf_match(int len1, const unsigned char *name1, int len2,
 			    const unsigned char *name2)
@@ -135,6 +136,8 @@ int udf_write_fi(struct inode *inode, st
 			mark_buffer_dirty_inode(fibh->ebh, inode);
 		mark_buffer_dirty_inode(fibh->sbh, inode);
 	}
+	inode_inc_iversion(inode);
+
 	return 0;
 }
 
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -57,6 +57,7 @@
 #include <linux/crc-itu-t.h>
 #include <linux/log2.h>
 #include <asm/byteorder.h>
+#include <linux/iversion.h>
 
 #include "udf_sb.h"
 #include "udf_i.h"
@@ -149,6 +150,7 @@ static struct inode *udf_alloc_inode(str
 	init_rwsem(&ei->i_data_sem);
 	ei->cached_extent.lstart = -1;
 	spin_lock_init(&ei->i_extent_cache_lock);
+	inode_set_iversion(&ei->vfs_inode, 1);
 
 	return &ei->vfs_inode;
 }

[PATCH 5.4 084/100] btrfs: fix memory ordering between normal and ordered work functions

[Greg Kroah-Hartman]

From: Nikolay Borisov <nborisov@suse.com>

commit 45da9c1767ac31857df572f0a909fbe88fd5a7e9 upstream.

Ordered work functions aren't guaranteed to be handled by the same thread
which executed the normal work functions. The only way execution between
normal/ordered functions is synchronized is via the WORK_DONE_BIT,
unfortunately the used bitops don't guarantee any ordering whatsoever.

This manifested as seemingly inexplicable crashes on ARM64, where
async_chunk::inode is seen as non-null in async_cow_submit which causes
submit_compressed_extents to be called and crash occurs because
async_chunk::inode suddenly became NULL. The call trace was similar to:

    pc : submit_compressed_extents+0x38/0x3d0
    lr : async_cow_submit+0x50/0xd0
    sp : ffff800015d4bc20

    <registers omitted for brevity>

    Call trace:
     submit_compressed_extents+0x38/0x3d0
     async_cow_submit+0x50/0xd0
     run_ordered_work+0xc8/0x280
     btrfs_work_helper+0x98/0x250
     process_one_work+0x1f0/0x4ac
     worker_thread+0x188/0x504
     kthread+0x110/0x114
     ret_from_fork+0x10/0x18

Fix this by adding respective barrier calls which ensure that all
accesses preceding setting of WORK_DONE_BIT are strictly ordered before
setting the flag. At the same time add a read barrier after reading of
WORK_DONE_BIT in run_ordered_work which ensures all subsequent loads
would be strictly ordered after reading the bit. This in turn ensures
are all accesses before WORK_DONE_BIT are going to be strictly ordered
before any access that can occur in ordered_func.

Reported-by: Chris Murphy <lists@colorremedies.com>
Fixes: 08a9ff326418 ("btrfs: Added btrfs_workqueue_struct implemented ordered execution based on kernel workqueue")
CC: stable@vger.kernel.org # 4.4+
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2011928
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Chris Murphy <chris@colorremedies.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/async-thread.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/fs/btrfs/async-thread.c
+++ b/fs/btrfs/async-thread.c
@@ -237,6 +237,13 @@ static void run_ordered_work(struct __bt
 				  ordered_list);
 		if (!test_bit(WORK_DONE_BIT, &work->flags))
 			break;
+		/*
+		 * Orders all subsequent loads after reading WORK_DONE_BIT,
+		 * paired with the smp_mb__before_atomic in btrfs_work_helper
+		 * this guarantees that the ordered function will see all
+		 * updates from ordinary work function.
+		 */
+		smp_rmb();
 
 		/*
 		 * we are going to call the ordered done function, but
@@ -325,6 +332,13 @@ static void btrfs_work_helper(struct wor
 	thresh_exec_hook(wq);
 	work->func(work);
 	if (need_order) {
+		/*
+		 * Ensures all memory accesses done in the work function are
+		 * ordered before setting the WORK_DONE_BIT. Ensuring the thread
+		 * which is going to executed the ordered work sees them.
+		 * Pairs with the smp_rmb in run_ordered_work.
+		 */
+		smp_mb__before_atomic();
 		set_bit(WORK_DONE_BIT, &work->flags);
 		run_ordered_work(wq, work);
 	}

[PATCH 5.4 085/100] parisc/sticon: fix reverse colors

[Greg Kroah-Hartman]

From: Sven Schnelle <svens@stackframe.org>

commit bec05f33ebc1006899c6d3e59a00c58881fe7626 upstream.

sticon_build_attr() checked the reverse argument and flipped
background and foreground color, but returned the non-reverse
value afterwards. Fix this and also add two local variables
for foreground and background color to make the code easier
to read.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/console/sticon.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/video/console/sticon.c
+++ b/drivers/video/console/sticon.c
@@ -291,13 +291,13 @@ static unsigned long sticon_getxy(struct
 static u8 sticon_build_attr(struct vc_data *conp, u8 color, u8 intens,
 			    u8 blink, u8 underline, u8 reverse, u8 italic)
 {
-    u8 attr = ((color & 0x70) >> 1) | ((color & 7));
+	u8 fg = color & 7;
+	u8 bg = (color & 0x70) >> 4;
 
-    if (reverse) {
-	color = ((color >> 3) & 0x7) | ((color & 0x7) << 3);
-    }
-
-    return attr;
+	if (reverse)
+		return (fg << 3) | bg;
+	else
+		return (bg << 3) | fg;
 }
 
 static void sticon_invert_region(struct vc_data *conp, u16 *p, int count)

[PATCH 5.4 086/100] cfg80211: call cfg80211_stop_ap when switch from P2P_GO type

[Greg Kroah-Hartman]

From: Nguyen Dinh Phi <phind.uet@gmail.com>

commit 563fbefed46ae4c1f70cffb8eb54c02df480b2c2 upstream.

If the userspace tools switch from NL80211_IFTYPE_P2P_GO to
NL80211_IFTYPE_ADHOC via send_msg(NL80211_CMD_SET_INTERFACE), it
does not call the cleanup cfg80211_stop_ap(), this leads to the
initialization of in-use data. For example, this path re-init the
sdata->assigned_chanctx_list while it is still an element of
assigned_vifs list, and makes that linked list corrupt.

Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Reported-by: syzbot+bbf402b783eeb6d908db@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20211027173722.777287-1-phind.uet@gmail.com
Cc: stable@vger.kernel.org
Fixes: ac800140c20e ("cfg80211: .stop_ap when interface is going down")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/wireless/util.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -991,6 +991,7 @@ int cfg80211_change_iface(struct cfg8021
 
 		switch (otype) {
 		case NL80211_IFTYPE_AP:
+		case NL80211_IFTYPE_P2P_GO:
 			cfg80211_stop_ap(rdev, dev, true);
 			break;
 		case NL80211_IFTYPE_ADHOC:

[PATCH 5.4 087/100] drm/udl: fix control-message timeout

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 5591c8f79db1729d9c5ac7f5b4d3a5c26e262d93 upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 5320918b9a87 ("drm/udl: initial UDL driver (v4)")
Cc: stable@vger.kernel.org      # 3.4
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025115353.5089-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/udl/udl_connector.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/udl/udl_connector.c
+++ b/drivers/gpu/drm/udl/udl_connector.c
@@ -29,7 +29,7 @@ static int udl_get_edid_block(void *data
 		ret = usb_control_msg(udl->udev,
 				      usb_rcvctrlpipe(udl->udev, 0),
 					  (0x02), (0x80 | (0x02 << 5)), bval,
-					  0xA1, read_buff, 2, HZ);
+					  0xA1, read_buff, 2, 1000);
 		if (ret < 1) {
 			DRM_ERROR("Read EDID byte %d failed err %x\n", i, ret);
 			kfree(read_buff);

[PATCH 5.4 088/100] drm/nouveau: use drm_dev_unplug() during device removal

[Greg Kroah-Hartman]

From: Jeremy Cline <jcline@redhat.com>

commit aff2299e0d81b26304ccc6a1ec0170e437f38efc upstream.

Nouveau does not currently support hot-unplugging, but it still makes
sense to switch from drm_dev_unregister() to drm_dev_unplug().
drm_dev_unplug() calls drm_dev_unregister() after marking the device as
unplugged, but only after any device critical sections are finished.

Since nouveau isn't using drm_dev_enter() and drm_dev_exit(), there are
no critical sections so this is nearly functionally equivalent. However,
the DRM layer does check to see if the device is unplugged, and if it is
returns appropriate error codes.

In the future nouveau can add critical sections in order to truly
support hot-unplugging.

Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201125202648.5220-2-jcline@redhat.com
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/14
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/nouveau/nouveau_drm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -779,7 +779,7 @@ nouveau_drm_device_remove(struct drm_dev
 	struct nvkm_client *client;
 	struct nvkm_device *device;
 
-	drm_dev_unregister(dev);
+	drm_dev_unplug(dev);
 
 	dev->irq_enabled = false;
 	client = nvxx_client(&drm->client.base);

[PATCH 5.4 089/100] drm/i915/dp: Ensure sink rate values are always valid

[Greg Kroah-Hartman]

From: Imre Deak <imre.deak@intel.com>

commit 6c34bd4532a3f39952952ddc102737595729afc4 upstream.

Atm, there are no sink rate values set for DP (vs. eDP) sinks until the
DPCD capabilities are successfully read from the sink. During this time
intel_dp->num_common_rates is 0 which can lead to a

intel_dp->common_rates[-1]    (*)

access, which is an undefined behaviour, in the following cases:

- In intel_dp_sync_state(), if the encoder is enabled without a sink
  connected to the encoder's connector (BIOS enabled a monitor, but the
  user unplugged the monitor until the driver loaded).
- In intel_dp_sync_state() if the encoder is enabled with a sink
  connected, but for some reason the DPCD read has failed.
- In intel_dp_compute_link_config() if modesetting a connector without
  a sink connected on it.
- In intel_dp_compute_link_config() if modesetting a connector with a
  a sink connected on it, but before probing the connector first.

To avoid the (*) access in all the above cases, make sure that the sink
rate table - and hence the common rate table - is always valid, by
setting a default minimum sink rate when registering the connector
before anything could use it.

I also considered setting all the DP link rates by default, so that
modesetting with higher resolution modes also succeeds in the last two
cases above. However in case a sink is not connected that would stop
working after the first modeset, due to the LT fallback logic. So this
would need more work, beyond the scope of this fix.

As I mentioned in the previous patch, I don't think the issue this patch
fixes is user visible, however it is an undefined behaviour by
definition and triggers a BUG() in CONFIG_UBSAN builds, hence CC:stable.

v2: Clear the default sink rates, before initializing these for eDP.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4297
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018143417.1452632-1-imre.deak@intel.com
(cherry picked from commit 3f61ef9777c0ab0f03f4af0ed6fd3e5250537a8d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/display/intel_dp.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -166,6 +166,12 @@ static void vlv_steal_power_sequencer(st
 				      enum pipe pipe);
 static void intel_dp_unset_edid(struct intel_dp *intel_dp);
 
+static void intel_dp_set_default_sink_rates(struct intel_dp *intel_dp)
+{
+	intel_dp->sink_rates[0] = 162000;
+	intel_dp->num_sink_rates = 1;
+}
+
 /* update sink rates from dpcd */
 static void intel_dp_set_sink_rates(struct intel_dp *intel_dp)
 {
@@ -4261,6 +4267,9 @@ intel_edp_init_dpcd(struct intel_dp *int
 	 */
 	intel_psr_init_dpcd(intel_dp);
 
+	/* Clear the default sink rates */
+	intel_dp->num_sink_rates = 0;
+
 	/* Read the eDP 1.4+ supported link rates. */
 	if (intel_dp->edp_dpcd[0] >= DP_EDP_14) {
 		__le16 sink_rates[DP_MAX_SUPPORTED_RATES];
@@ -7167,6 +7176,8 @@ intel_dp_init_connector(struct intel_dig
 		return false;
 
 	intel_dp_set_source_rates(intel_dp);
+	intel_dp_set_default_sink_rates(intel_dp);
+	intel_dp_set_common_rates(intel_dp);
 
 	intel_dp->reset_link_params = true;
 	intel_dp->pps_pipe = INVALID_PIPE;

[PATCH 5.4 090/100] drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga and dvi connectors

[Greg Kroah-Hartman]

From: hongao <hongao@uniontech.com>

commit bf552083916a7f8800477b5986940d1c9a31b953 upstream.

amdgpu_connector_vga_get_modes missed function amdgpu_get_native_mode
which assign amdgpu_encoder->native_mode with *preferred_mode result in
amdgpu_encoder->native_mode.clock always be 0. That will cause
amdgpu_connector_set_property returned early on:
if ((rmx_type != DRM_MODE_SCALE_NONE) &&
	(amdgpu_encoder->native_mode.clock == 0))
when we try to set scaling mode Full/Full aspect/Center.
Add the missing function to amdgpu_connector_vga_get_mode can fix this.
It also works on dvi connectors because
amdgpu_connector_dvi_helper_funcs.get_mode use the same method.

Signed-off-by: hongao <hongao@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
@@ -829,6 +829,7 @@ static int amdgpu_connector_vga_get_mode
 
 	amdgpu_connector_get_edid(connector);
 	ret = amdgpu_connector_ddc_get_modes(connector);
+	amdgpu_get_native_mode(connector);
 
 	return ret;
 }

[PATCH 5.4 091/100] Revert "net: mvpp2: disable force link UP during port init procedure"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit f595e44b161a3c751943c256b6de80dc57d5fcf8 which is
commit 87508224485323ce2d4e7fb929ec80f51adcc238 upstream.

It causes reported problems so should be removed.

Link: https://lore.kernel.org/r/YZv1SBrYTXmorcLJ@shell.armlinux.org.uk
Reported-by: Jordan Vrtanoski <jordan.vrtanoski@gmail.com>
Reported-by: Russell King <linux@armlinux.org.uk>
Cc: Stefan Chulski <stefanc@marvell.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c |   14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)

--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -4545,7 +4545,7 @@ static int mvpp2_port_init(struct mvpp2_
 	struct mvpp2 *priv = port->priv;
 	struct mvpp2_txq_pcpu *txq_pcpu;
 	unsigned int thread;
-	int queue, err, val;
+	int queue, err;
 
 	/* Checks for hardware constraints */
 	if (port->first_rxq + port->nrxqs >
@@ -4559,18 +4559,6 @@ static int mvpp2_port_init(struct mvpp2_
 	mvpp2_egress_disable(port);
 	mvpp2_port_disable(port);
 
-	if (mvpp2_is_xlg(port->phy_interface)) {
-		val = readl(port->base + MVPP22_XLG_CTRL0_REG);
-		val &= ~MVPP22_XLG_CTRL0_FORCE_LINK_PASS;
-		val |= MVPP22_XLG_CTRL0_FORCE_LINK_DOWN;
-		writel(val, port->base + MVPP22_XLG_CTRL0_REG);
-	} else {
-		val = readl(port->base + MVPP2_GMAC_AUTONEG_CONFIG);
-		val &= ~MVPP2_GMAC_FORCE_LINK_PASS;
-		val |= MVPP2_GMAC_FORCE_LINK_DOWN;
-		writel(val, port->base + MVPP2_GMAC_AUTONEG_CONFIG);
-	}
-
 	port->tx_time_coal = MVPP2_TXDONE_COAL_USEC;
 
 	port->txqs = devm_kcalloc(dev, port->ntxqs, sizeof(*port->txqs),

[PATCH 5.4 092/100] perf/core: Avoid put_page() when GUP fails

[Greg Kroah-Hartman]

From: Greg Thelen <gthelen@google.com>

commit 4716023a8f6a0f4a28047f14dd7ebdc319606b84 upstream.

PEBS PERF_SAMPLE_PHYS_ADDR events use perf_virt_to_phys() to convert PMU
sampled virtual addresses to physical using get_user_page_fast_only()
and page_to_phys().

Some get_user_page_fast_only() error cases return false, indicating no
page reference, but still initialize the output page pointer with an
unreferenced page. In these error cases perf_virt_to_phys() calls
put_page(). This causes page reference count underflow, which can lead
to unintentional page sharing.

Fix perf_virt_to_phys() to only put_page() if get_user_page_fast_only()
returns a referenced page.

Fixes: fc7ce9c74c3ad ("perf/core, x86: Add PERF_SAMPLE_PHYS_ADDR")
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211111021814.757086-1-gthelen@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/events/core.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -6536,7 +6536,6 @@ void perf_output_sample(struct perf_outp
 static u64 perf_virt_to_phys(u64 virt)
 {
 	u64 phys_addr = 0;
-	struct page *p = NULL;
 
 	if (!virt)
 		return 0;
@@ -6555,14 +6554,15 @@ static u64 perf_virt_to_phys(u64 virt)
 		 * If failed, leave phys_addr as 0.
 		 */
 		if (current->mm != NULL) {
+			struct page *p;
+
 			pagefault_disable();
-			if (__get_user_pages_fast(virt, 1, 0, &p) == 1)
+			if (__get_user_pages_fast(virt, 1, 0, &p) == 1) {
 				phys_addr = page_to_phys(p) + virt % PAGE_SIZE;
+				put_page(p);
+			}
 			pagefault_enable();
 		}
-
-		if (p)
-			put_page(p);
 	}
 
 	return phys_addr;

[PATCH 5.4 093/100] batman-adv: Consider fragmentation for needed_headroom

[Greg Kroah-Hartman]

From: Sven Eckelmann <sven@narfation.org>

commit 4ca23e2c2074465bff55ea14221175fecdf63c5f upstream.

If a batman-adv packets has to be fragmented, then the original batman-adv
packet header is not stripped away. Instead, only a new header is added in
front of the packet after it was split.

This size must be considered to avoid cost intensive reallocations during
the transmission through the various device layers.

Fixes: 7bca68c7844b ("batman-adv: Add lower layer needed_(head|tail)room to own ones")
Reported-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/batman-adv/hard-interface.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/batman-adv/hard-interface.c
+++ b/net/batman-adv/hard-interface.c
@@ -554,6 +554,9 @@ static void batadv_hardif_recalc_extra_s
 	needed_headroom = lower_headroom + (lower_header_len - ETH_HLEN);
 	needed_headroom += batadv_max_header_len();
 
+	/* fragmentation headers don't strip the unicast/... header */
+	needed_headroom += sizeof(struct batadv_frag_packet);
+
 	soft_iface->needed_headroom = needed_headroom;
 	soft_iface->needed_tailroom = lower_tailroom;
 }

[PATCH 5.4 094/100] batman-adv: Reserve needed_*room for fragments

[Greg Kroah-Hartman]

From: Sven Eckelmann <sven@narfation.org>

commit c5cbfc87558168ef4c3c27ce36eba6b83391db19 upstream.

The batadv net_device is trying to propagate the needed_headroom and
needed_tailroom from the lower devices. This is needed to avoid cost
intensive reallocations using pskb_expand_head during the transmission.

But the fragmentation code split the skb's without adding extra room at the
end/beginning of the various fragments. This reduced the performance of
transmissions over complex scenarios (batadv on vxlan on wireguard) because
the lower devices had to perform the reallocations at least once.

Fixes: ee75ed88879a ("batman-adv: Fragment and send skbs larger than mtu")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/batman-adv/fragmentation.c |   15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

--- a/net/batman-adv/fragmentation.c
+++ b/net/batman-adv/fragmentation.c
@@ -391,6 +391,7 @@ out:
 
 /**
  * batadv_frag_create() - create a fragment from skb
+ * @net_dev: outgoing device for fragment
  * @skb: skb to create fragment from
  * @frag_head: header to use in new fragment
  * @fragment_size: size of new fragment
@@ -401,22 +402,25 @@ out:
  *
  * Return: the new fragment, NULL on error.
  */
-static struct sk_buff *batadv_frag_create(struct sk_buff *skb,
+static struct sk_buff *batadv_frag_create(struct net_device *net_dev,
+					  struct sk_buff *skb,
 					  struct batadv_frag_packet *frag_head,
 					  unsigned int fragment_size)
 {
+	unsigned int ll_reserved = LL_RESERVED_SPACE(net_dev);
+	unsigned int tailroom = net_dev->needed_tailroom;
 	struct sk_buff *skb_fragment;
 	unsigned int header_size = sizeof(*frag_head);
 	unsigned int mtu = fragment_size + header_size;
 
-	skb_fragment = netdev_alloc_skb(NULL, mtu + ETH_HLEN);
+	skb_fragment = dev_alloc_skb(ll_reserved + mtu + tailroom);
 	if (!skb_fragment)
 		goto err;
 
 	skb_fragment->priority = skb->priority;
 
 	/* Eat the last mtu-bytes of the skb */
-	skb_reserve(skb_fragment, header_size + ETH_HLEN);
+	skb_reserve(skb_fragment, ll_reserved + header_size);
 	skb_split(skb, skb_fragment, skb->len - fragment_size);
 
 	/* Add the header */
@@ -439,11 +443,12 @@ int batadv_frag_send_packet(struct sk_bu
 			    struct batadv_orig_node *orig_node,
 			    struct batadv_neigh_node *neigh_node)
 {
+	struct net_device *net_dev = neigh_node->if_incoming->net_dev;
 	struct batadv_priv *bat_priv;
 	struct batadv_hard_iface *primary_if = NULL;
 	struct batadv_frag_packet frag_header;
 	struct sk_buff *skb_fragment;
-	unsigned int mtu = neigh_node->if_incoming->net_dev->mtu;
+	unsigned int mtu = net_dev->mtu;
 	unsigned int header_size = sizeof(frag_header);
 	unsigned int max_fragment_size, num_fragments;
 	int ret;
@@ -503,7 +508,7 @@ int batadv_frag_send_packet(struct sk_bu
 			goto put_primary_if;
 		}
 
-		skb_fragment = batadv_frag_create(skb, &frag_header,
+		skb_fragment = batadv_frag_create(net_dev, skb, &frag_header,
 						  max_fragment_size);
 		if (!skb_fragment) {
 			ret = -ENOMEM;

[PATCH 5.4 095/100] batman-adv: Dont always reallocate the fragmentation skb head

[Greg Kroah-Hartman]

From: Sven Eckelmann <sven@narfation.org>

commit 992b03b88e36254e26e9a4977ab948683e21bd9f upstream.

When a packet is fragmented by batman-adv, the original batman-adv header
is not modified. Only a new fragmentation is inserted between the original
one and the ethernet header. The code must therefore make sure that it has
a writable region of this size in the skbuff head.

But it is not useful to always reallocate the skbuff by this size even when
there would be more than enough headroom still in the skb. The reallocation
is just to costly during in this codepath.

Fixes: ee75ed88879a ("batman-adv: Fragment and send skbs larger than mtu")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/batman-adv/fragmentation.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

--- a/net/batman-adv/fragmentation.c
+++ b/net/batman-adv/fragmentation.c
@@ -527,13 +527,14 @@ int batadv_frag_send_packet(struct sk_bu
 		frag_header.no++;
 	}
 
-	/* Make room for the fragment header. */
-	if (batadv_skb_head_push(skb, header_size) < 0 ||
-	    pskb_expand_head(skb, header_size + ETH_HLEN, 0, GFP_ATOMIC) < 0) {
-		ret = -ENOMEM;
+	/* make sure that there is at least enough head for the fragmentation
+	 * and ethernet headers
+	 */
+	ret = skb_cow_head(skb, ETH_HLEN + header_size);
+	if (ret < 0)
 		goto put_primary_if;
-	}
 
+	skb_push(skb, header_size);
 	memcpy(skb->data, &frag_header, header_size);
 
 	/* Send the last fragment */

[PATCH 5.4 096/100] ASoC: DAPM: Cover regression by kctl change notification fix

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 827b0913a9d9d07a0c3e559dbb20ca4d6d285a54 upstream.

The recent fix for DAPM to correct the kctl change notification by the
commit 5af82c81b2c4 ("ASoC: DAPM: Fix missing kctl change
notifications") caused other regressions since it changed the behavior
of snd_soc_dapm_set_pin() that is called from several API functions.
Formerly it returned always 0 for success, but now it returns 0 or 1.

This patch addresses it, restoring the old behavior of
snd_soc_dapm_set_pin() while keeping the fix in
snd_soc_dapm_put_pin_switch().

Fixes: 5af82c81b2c4 ("ASoC: DAPM: Fix missing kctl change notifications")
Reported-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20211105090925.20575-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/soc-dapm.c |   29 +++++++++++++++++++++++------
 1 file changed, 23 insertions(+), 6 deletions(-)

--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -2542,8 +2542,13 @@ static struct snd_soc_dapm_widget *dapm_
 	return NULL;
 }
 
-static int snd_soc_dapm_set_pin(struct snd_soc_dapm_context *dapm,
-				const char *pin, int status)
+/*
+ * set the DAPM pin status:
+ * returns 1 when the value has been updated, 0 when unchanged, or a negative
+ * error code; called from kcontrol put callback
+ */
+static int __snd_soc_dapm_set_pin(struct snd_soc_dapm_context *dapm,
+				  const char *pin, int status)
 {
 	struct snd_soc_dapm_widget *w = dapm_find_widget(dapm, pin, true);
 	int ret = 0;
@@ -2569,6 +2574,18 @@ static int snd_soc_dapm_set_pin(struct s
 	return ret;
 }
 
+/*
+ * similar as __snd_soc_dapm_set_pin(), but returns 0 when successful;
+ * called from several API functions below
+ */
+static int snd_soc_dapm_set_pin(struct snd_soc_dapm_context *dapm,
+				const char *pin, int status)
+{
+	int ret = __snd_soc_dapm_set_pin(dapm, pin, status);
+
+	return ret < 0 ? ret : 0;
+}
+
 /**
  * snd_soc_dapm_sync_unlocked - scan and power dapm paths
  * @dapm: DAPM context
@@ -3584,10 +3601,10 @@ int snd_soc_dapm_put_pin_switch(struct s
 	const char *pin = (const char *)kcontrol->private_value;
 	int ret;
 
-	if (ucontrol->value.integer.value[0])
-		ret = snd_soc_dapm_enable_pin(&card->dapm, pin);
-	else
-		ret = snd_soc_dapm_disable_pin(&card->dapm, pin);
+	mutex_lock_nested(&card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME);
+	ret = __snd_soc_dapm_set_pin(&card->dapm, pin,
+				     !!ucontrol->value.integer.value[0]);
+	mutex_unlock(&card->dapm_mutex);
 
 	snd_soc_dapm_sync(&card->dapm);
 	return ret;

[PATCH 5.4 097/100] usb: max-3421: Use driver data instead of maintaining a list of bound devices

[Greg Kroah-Hartman]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

commit fc153aba3ef371d0d76eb88230ed4e0dee5b38f2 upstream.

Instead of maintaining a single-linked list of devices that must be
searched linearly in .remove() just use spi_set_drvdata() to remember the
link between the spi device and the driver struct. Then the global list
and the next member can be dropped.

This simplifies the driver, reduces the memory footprint and the time to
search the list. Also it makes obvious that there is always a corresponding
driver struct for a given device in .remove(), so the error path for
!max3421_hcd can be dropped, too.

As a side effect this fixes a data inconsistency when .probe() races with
itself for a second max3421 device in manipulating max3421_hcd_list. A
similar race is fixed in .remove(), too.

Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211018204028.2914597-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/max3421-hcd.c |   25 +++++--------------------
 1 file changed, 5 insertions(+), 20 deletions(-)

--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -125,8 +125,6 @@ struct max3421_hcd {
 
 	struct task_struct *spi_thread;
 
-	struct max3421_hcd *next;
-
 	enum max3421_rh_state rh_state;
 	/* lower 16 bits contain port status, upper 16 bits the change mask: */
 	u32 port_status;
@@ -174,8 +172,6 @@ struct max3421_ep {
 	u8 retransmit;			/* packet needs retransmission */
 };
 
-static struct max3421_hcd *max3421_hcd_list;
-
 #define MAX3421_FIFO_SIZE	64
 
 #define MAX3421_SPI_DIR_RD	0	/* read register from MAX3421 */
@@ -1882,9 +1878,8 @@ max3421_probe(struct spi_device *spi)
 	}
 	set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 	max3421_hcd = hcd_to_max3421(hcd);
-	max3421_hcd->next = max3421_hcd_list;
-	max3421_hcd_list = max3421_hcd;
 	INIT_LIST_HEAD(&max3421_hcd->ep_list);
+	spi_set_drvdata(spi, max3421_hcd);
 
 	max3421_hcd->tx = kmalloc(sizeof(*max3421_hcd->tx), GFP_KERNEL);
 	if (!max3421_hcd->tx)
@@ -1934,28 +1929,18 @@ error:
 static int
 max3421_remove(struct spi_device *spi)
 {
-	struct max3421_hcd *max3421_hcd = NULL, **prev;
-	struct usb_hcd *hcd = NULL;
+	struct max3421_hcd *max3421_hcd;
+	struct usb_hcd *hcd;
 	unsigned long flags;
 
-	for (prev = &max3421_hcd_list; *prev; prev = &(*prev)->next) {
-		max3421_hcd = *prev;
-		hcd = max3421_to_hcd(max3421_hcd);
-		if (hcd->self.controller == &spi->dev)
-			break;
-	}
-	if (!max3421_hcd) {
-		dev_err(&spi->dev, "no MAX3421 HCD found for SPI device %p\n",
-			spi);
-		return -ENODEV;
-	}
+	max3421_hcd = spi_get_drvdata(spi);
+	hcd = max3421_to_hcd(max3421_hcd);
 
 	usb_remove_hcd(hcd);
 
 	spin_lock_irqsave(&max3421_hcd->lock, flags);
 
 	kthread_stop(max3421_hcd->spi_thread);
-	*prev = max3421_hcd->next;
 
 	spin_unlock_irqrestore(&max3421_hcd->lock, flags);
 

[PATCH 5.4 098/100] ice: Delete always true check of PF pointer

[Greg Kroah-Hartman]

From: Leon Romanovsky <leonro@nvidia.com>

commit 2ff04286a9569675948f39cec2c6ad47c3584633 upstream.

PF pointer is always valid when PCI core calls its .shutdown() and
.remove() callbacks. There is no need to check it again.

Fixes: 837f08fdecbe ("ice: Add basic driver framework for Intel(R) E800 Series")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/ice/ice_main.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -3005,9 +3005,6 @@ static void ice_remove(struct pci_dev *p
 	struct ice_pf *pf = pci_get_drvdata(pdev);
 	int i;
 
-	if (!pf)
-		return;
-
 	for (i = 0; i < ICE_MAX_RESET_WAIT; i++) {
 		if (!ice_is_reset_in_progress(pf->state))
 			break;

[PATCH 5.4 099/100] tlb: mmu_gather: add tlb_flush_*_range APIs

[Greg Kroah-Hartman]

From: Peter Zijlstra (Intel) <peterz@infradead.org>

commit 2631ed00b0498810f8d5c2163c6b5270d893687b upstream.

tlb_flush_{pte|pmd|pud|p4d}_range() adjust the tlb->start and
tlb->end, then set corresponding cleared_*.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Zhenyu Ye <yezhenyu2@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20200625080314.230-5-yezhenyu2@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/asm-generic/tlb.h |   55 +++++++++++++++++++++++++++++++++-------------
 1 file changed, 40 insertions(+), 15 deletions(-)

--- a/include/asm-generic/tlb.h
+++ b/include/asm-generic/tlb.h
@@ -495,6 +495,38 @@ static inline void tlb_end_vma(struct mm
 }
 #endif
 
+/*
+ * tlb_flush_{pte|pmd|pud|p4d}_range() adjust the tlb->start and tlb->end,
+ * and set corresponding cleared_*.
+ */
+static inline void tlb_flush_pte_range(struct mmu_gather *tlb,
+				     unsigned long address, unsigned long size)
+{
+	__tlb_adjust_range(tlb, address, size);
+	tlb->cleared_ptes = 1;
+}
+
+static inline void tlb_flush_pmd_range(struct mmu_gather *tlb,
+				     unsigned long address, unsigned long size)
+{
+	__tlb_adjust_range(tlb, address, size);
+	tlb->cleared_pmds = 1;
+}
+
+static inline void tlb_flush_pud_range(struct mmu_gather *tlb,
+				     unsigned long address, unsigned long size)
+{
+	__tlb_adjust_range(tlb, address, size);
+	tlb->cleared_puds = 1;
+}
+
+static inline void tlb_flush_p4d_range(struct mmu_gather *tlb,
+				     unsigned long address, unsigned long size)
+{
+	__tlb_adjust_range(tlb, address, size);
+	tlb->cleared_p4ds = 1;
+}
+
 #ifndef __tlb_remove_tlb_entry
 #define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
 #endif
@@ -508,19 +540,17 @@ static inline void tlb_end_vma(struct mm
  */
 #define tlb_remove_tlb_entry(tlb, ptep, address)		\
 	do {							\
-		__tlb_adjust_range(tlb, address, PAGE_SIZE);	\
-		tlb->cleared_ptes = 1;				\
+		tlb_flush_pte_range(tlb, address, PAGE_SIZE);	\
 		__tlb_remove_tlb_entry(tlb, ptep, address);	\
 	} while (0)
 
 #define tlb_remove_huge_tlb_entry(h, tlb, ptep, address)	\
 	do {							\
 		unsigned long _sz = huge_page_size(h);		\
-		__tlb_adjust_range(tlb, address, _sz);		\
 		if (_sz == PMD_SIZE)				\
-			tlb->cleared_pmds = 1;			\
+			tlb_flush_pmd_range(tlb, address, _sz);	\
 		else if (_sz == PUD_SIZE)			\
-			tlb->cleared_puds = 1;			\
+			tlb_flush_pud_range(tlb, address, _sz);	\
 		__tlb_remove_tlb_entry(tlb, ptep, address);	\
 	} while (0)
 
@@ -534,8 +564,7 @@ static inline void tlb_end_vma(struct mm
 
 #define tlb_remove_pmd_tlb_entry(tlb, pmdp, address)			\
 	do {								\
-		__tlb_adjust_range(tlb, address, HPAGE_PMD_SIZE);	\
-		tlb->cleared_pmds = 1;					\
+		tlb_flush_pmd_range(tlb, address, HPAGE_PMD_SIZE);	\
 		__tlb_remove_pmd_tlb_entry(tlb, pmdp, address);		\
 	} while (0)
 
@@ -549,8 +578,7 @@ static inline void tlb_end_vma(struct mm
 
 #define tlb_remove_pud_tlb_entry(tlb, pudp, address)			\
 	do {								\
-		__tlb_adjust_range(tlb, address, HPAGE_PUD_SIZE);	\
-		tlb->cleared_puds = 1;					\
+		tlb_flush_pud_range(tlb, address, HPAGE_PUD_SIZE);	\
 		__tlb_remove_pud_tlb_entry(tlb, pudp, address);		\
 	} while (0)
 
@@ -575,9 +603,8 @@ static inline void tlb_end_vma(struct mm
 #ifndef pte_free_tlb
 #define pte_free_tlb(tlb, ptep, address)			\
 	do {							\
-		__tlb_adjust_range(tlb, address, PAGE_SIZE);	\
+		tlb_flush_pmd_range(tlb, address, PAGE_SIZE);	\
 		tlb->freed_tables = 1;				\
-		tlb->cleared_pmds = 1;				\
 		__pte_free_tlb(tlb, ptep, address);		\
 	} while (0)
 #endif
@@ -585,9 +612,8 @@ static inline void tlb_end_vma(struct mm
 #ifndef pmd_free_tlb
 #define pmd_free_tlb(tlb, pmdp, address)			\
 	do {							\
-		__tlb_adjust_range(tlb, address, PAGE_SIZE);	\
+		tlb_flush_pud_range(tlb, address, PAGE_SIZE);	\
 		tlb->freed_tables = 1;				\
-		tlb->cleared_puds = 1;				\
 		__pmd_free_tlb(tlb, pmdp, address);		\
 	} while (0)
 #endif
@@ -596,9 +622,8 @@ static inline void tlb_end_vma(struct mm
 #ifndef pud_free_tlb
 #define pud_free_tlb(tlb, pudp, address)			\
 	do {							\
-		__tlb_adjust_range(tlb, address, PAGE_SIZE);	\
+		tlb_flush_p4d_range(tlb, address, PAGE_SIZE);	\
 		tlb->freed_tables = 1;				\
-		tlb->cleared_p4ds = 1;				\
 		__pud_free_tlb(tlb, pudp, address);		\
 	} while (0)
 #endif

[PATCH 5.4 100/100] hugetlbfs: flush TLBs correctly after huge_pmd_unshare

[Greg Kroah-Hartman]

From: Nadav Amit <namit@vmware.com>

commit a4a118f2eead1d6c49e00765de89878288d4b890 upstream.

When __unmap_hugepage_range() calls to huge_pmd_unshare() succeed, a TLB
flush is missing.  This TLB flush must be performed before releasing the
i_mmap_rwsem, in order to prevent an unshared PMDs page from being
released and reused before the TLB flush took place.

Arguably, a comprehensive solution would use mmu_gather interface to
batch the TLB flushes and the PMDs page release, however it is not an
easy solution: (1) try_to_unmap_one() and try_to_migrate_one() also call
huge_pmd_unshare() and they cannot use the mmu_gather interface; and (2)
deferring the release of the page reference for the PMDs page until
after i_mmap_rwsem is dropeed can confuse huge_pmd_unshare() into
thinking PMDs are shared when they are not.

Fix __unmap_hugepage_range() by adding the missing TLB flush, and
forcing a flush when unshare is successful.

Fixes: 24669e58477e ("hugetlb: use mmu_gather instead of a temporary linked list for accumulating pages)" # 3.6
Signed-off-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/hugetlb.c |   23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -3589,6 +3589,7 @@ void __unmap_hugepage_range(struct mmu_g
 	struct hstate *h = hstate_vma(vma);
 	unsigned long sz = huge_page_size(h);
 	struct mmu_notifier_range range;
+	bool force_flush = false;
 
 	WARN_ON(!is_vm_hugetlb_page(vma));
 	BUG_ON(start & ~huge_page_mask(h));
@@ -3617,10 +3618,8 @@ void __unmap_hugepage_range(struct mmu_g
 		ptl = huge_pte_lock(h, mm, ptep);
 		if (huge_pmd_unshare(mm, &address, ptep)) {
 			spin_unlock(ptl);
-			/*
-			 * We just unmapped a page of PMDs by clearing a PUD.
-			 * The caller's TLB flush range should cover this area.
-			 */
+			tlb_flush_pmd_range(tlb, address & PUD_MASK, PUD_SIZE);
+			force_flush = true;
 			continue;
 		}
 
@@ -3677,6 +3676,22 @@ void __unmap_hugepage_range(struct mmu_g
 	}
 	mmu_notifier_invalidate_range_end(&range);
 	tlb_end_vma(tlb, vma);
+
+	/*
+	 * If we unshared PMDs, the TLB flush was not recorded in mmu_gather. We
+	 * could defer the flush until now, since by holding i_mmap_rwsem we
+	 * guaranteed that the last refernece would not be dropped. But we must
+	 * do the flushing before we return, as otherwise i_mmap_rwsem will be
+	 * dropped and the last reference to the shared PMDs page might be
+	 * dropped as well.
+	 *
+	 * In theory we could defer the freeing of the PMD pages as well, but
+	 * huge_pmd_unshare() relies on the exact page_count for the PMD page to
+	 * detect sharing, so we cannot defer the release of the page either.
+	 * Instead, do flush now.
+	 */
+	if (force_flush)
+		tlb_flush_mmu_tlbonly(tlb);
 }
 
 void __unmap_hugepage_range_final(struct mmu_gather *tlb,

Re: [PATCH 5.4 000/100] 5.4.162-rc1 review

[Guenter Roeck]

On Wed, Nov 24, 2021 at 12:57:16PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.162 release.
> There are 100 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 26 Nov 2021 11:56:36 +0000.
> Anything received after that time might be too late.
> 

arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi:412.21-414.5: ERROR (duplicate_label): /soc/codec: Duplicate label 'lpass_codec' on /soc/codec and /soc@0/codec
ERROR: Input tree has errors, aborting (use -f to force output)

Guenter

Re: [PATCH 5.4 000/100] 5.4.162-rc1 review

[Naresh Kamboju]

On Wed, 24 Nov 2021 at 18:19, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.4.162 release.
> There are 100 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 26 Nov 2021 11:56:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.162-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Regression found on arm64 gcc-11 builds
Following build warnings / errors reported on stable-rc 5.4.


builds/linux/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi:412.21-414.5:
ERROR (duplicate_label): /soc/codec: Duplicate label 'lpass_codec' on
/soc/codec and /soc@0/codec
ERROR: Input tree has errors, aborting (use -f to force output)
make[3]: *** [scripts/Makefile.lib:285:
arch/arm64/boot/dts/qcom/apq8016-sbc.dtb] Error 2


The bisect tool pointed to,

b979ffa8bbd6e4c33df7f3e7ac3d63f2234c023c is the first bad commit
commit b979ffa8bbd6e4c33df7f3e7ac3d63f2234c023c
Author: Stephan Gerhold <stephan@gerhold.net>
Date:   Tue Sep 21 17:21:18 2021 +0200

    arm64: dts: qcom: msm8916: Add unit name for /soc node



As it was reported here,
https://lore.kernel.org/stable/CA+G9fYv5fnntoa1vzXp52=TSxCK=U8fV8J-AbE+WmKH1w4ebwg@mail.gmail.com/

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.4 000/100] 5.4.162-rc1 review

[Greg Kroah-Hartman]

On Wed, Nov 24, 2021 at 07:40:17AM -0800, Guenter Roeck wrote:
> On Wed, Nov 24, 2021 at 12:57:16PM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.4.162 release.
> > There are 100 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Fri, 26 Nov 2021 11:56:36 +0000.
> > Anything received after that time might be too late.
> > 
> 
> arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi:412.21-414.5: ERROR (duplicate_label): /soc/codec: Duplicate label 'lpass_codec' on /soc/codec and /soc@0/codec
> ERROR: Input tree has errors, aborting (use -f to force output)

Will go drop the offending patch, thanks.

greg k-h

Re: [PATCH 5.4 000/100] 5.4.162-rc1 review

[Greg Kroah-Hartman]

On Wed, Nov 24, 2021 at 09:10:35PM +0530, Naresh Kamboju wrote:
> On Wed, 24 Nov 2021 at 18:19, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > This is the start of the stable review cycle for the 5.4.162 release.
> > There are 100 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Fri, 26 Nov 2021 11:56:36 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.162-rc1.gz
> > or in the git tree and branch at:
> >         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> 
> Regression found on arm64 gcc-11 builds
> Following build warnings / errors reported on stable-rc 5.4.
> 
> 
> builds/linux/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi:412.21-414.5:
> ERROR (duplicate_label): /soc/codec: Duplicate label 'lpass_codec' on
> /soc/codec and /soc@0/codec
> ERROR: Input tree has errors, aborting (use -f to force output)
> make[3]: *** [scripts/Makefile.lib:285:
> arch/arm64/boot/dts/qcom/apq8016-sbc.dtb] Error 2
> 
> 
> The bisect tool pointed to,
> 
> b979ffa8bbd6e4c33df7f3e7ac3d63f2234c023c is the first bad commit
> commit b979ffa8bbd6e4c33df7f3e7ac3d63f2234c023c
> Author: Stephan Gerhold <stephan@gerhold.net>
> Date:   Tue Sep 21 17:21:18 2021 +0200
> 
>     arm64: dts: qcom: msm8916: Add unit name for /soc node
> 
> 
> 
> As it was reported here,
> https://lore.kernel.org/stable/CA+G9fYv5fnntoa1vzXp52=TSxCK=U8fV8J-AbE+WmKH1w4ebwg@mail.gmail.com/
> 
> Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>

Now dropped, thanks.

greg k-h

Re: [PATCH 5.4 000/100] 5.4.162-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Wed, Nov 24, 2021 at 2:10 PM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.4.162 release.
> There are 100 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 26 Nov 2021 11:56:36 +0000.
> Anything received after that time might be too late.

Just a quick note, my arm64 builds are failing with the error:
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi:412.21-414.5: ERROR
(duplicate_label): /soc/codec: Duplicate label 'lpass_codec' on
/soc/codec and /soc@0/codec

I have not yet tested, but I think it will be for:
f4850fe1a15d (\"arm64: dts: qcom: msm8916: Add unit name for /soc node\")


-- 
Regards
Sudip

Re: [PATCH 5.4 000/100] 5.4.162-rc1 review

[Guenter Roeck]

On Wed, Nov 24, 2021 at 12:57:16PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.162 release.
> There are 100 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 26 Nov 2021 11:56:36 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 157 pass: 155 fail: 2
Failed builds:
	arm64:defconfig
	arm64:allmodconfig
Qemu test results:
	total: 446 pass: 402 fail: 44
Failed tests:
	<all arm64>
	<all arm64be>

arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi:412.21-414.5: ERROR (duplicate_label): /soc/codec: Duplicate label 'lpass_codec' on /soc/codec and /soc@0/codec

Guenter

Re: [PATCH 5.4 000/100] 5.4.162-rc1 review

[Greg Kroah-Hartman]

On Wed, Nov 24, 2021 at 09:09:53PM +0000, Sudip Mukherjee wrote:
> Hi Greg,
> 
> On Wed, Nov 24, 2021 at 2:10 PM Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > This is the start of the stable review cycle for the 5.4.162 release.
> > There are 100 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Fri, 26 Nov 2021 11:56:36 +0000.
> > Anything received after that time might be too late.
> 
> Just a quick note, my arm64 builds are failing with the error:
> arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi:412.21-414.5: ERROR
> (duplicate_label): /soc/codec: Duplicate label 'lpass_codec' on
> /soc/codec and /soc@0/codec
> 
> I have not yet tested, but I think it will be for:
> f4850fe1a15d (\"arm64: dts: qcom: msm8916: Add unit name for /soc node\")
> 

I have dropped the offending commit now, thanks.

greg k-h