From: Michael Straube <straube.linux@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, phil@philpotter.co.uk,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
Michael Straube <straube.linux@gmail.com>
Subject: [PATCH 5/5] staging: r8188eu: remove module parameter rtw_rf_config
Date: Sun, 28 Nov 2021 14:53:26 +0100 [thread overview]
Message-ID: <20211128135326.9838-6-straube.linux@gmail.com> (raw)
In-Reply-To: <20211128135326.9838-1-straube.linux@gmail.com>
The module parameter rtw_rf_config is not used in the driver.
Remove it and remove the now unused enum rt_rf_type_def.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
drivers/staging/r8188eu/include/drv_types.h | 1 -
drivers/staging/r8188eu/include/rtw_rf.h | 10 ----------
drivers/staging/r8188eu/os_dep/os_intfs.c | 3 ---
3 files changed, 14 deletions(-)
diff --git a/drivers/staging/r8188eu/include/drv_types.h b/drivers/staging/r8188eu/include/drv_types.h
index 3e4928320f17..edcdbd646eaa 100644
--- a/drivers/staging/r8188eu/include/drv_types.h
+++ b/drivers/staging/r8188eu/include/drv_types.h
@@ -85,7 +85,6 @@ struct registry_priv {
u8 ampdu_amsdu;/* A-MPDU Supports A-MSDU is permitted */
u8 lowrate_two_xmit;
- u8 rf_config;
u8 low_power;
u8 wifi_spec;/* !turbo_mode */
diff --git a/drivers/staging/r8188eu/include/rtw_rf.h b/drivers/staging/r8188eu/include/rtw_rf.h
index 7ec252fec054..d0a408b903dc 100644
--- a/drivers/staging/r8188eu/include/rtw_rf.h
+++ b/drivers/staging/r8188eu/include/rtw_rf.h
@@ -99,16 +99,6 @@ enum ht_extchnl_offset {
HT_EXTCHNL_OFFSET_LOWER = 3,
};
-/* 2007/11/15 MH Define different RF type. */
-enum rt_rf_type_def {
- RF_1T2R = 0,
- RF_2T4R = 1,
- RF_2T2R = 2,
- RF_1T1R = 3,
- RF_2T2R_GREEN = 4,
- RF_819X_MAX_TYPE = 5,
-};
-
u32 rtw_ch2freq(u32 ch);
#endif /* _RTL8711_RF_H_ */
diff --git a/drivers/staging/r8188eu/os_dep/os_intfs.c b/drivers/staging/r8188eu/os_dep/os_intfs.c
index 5a5f182d30c9..0021ca578949 100644
--- a/drivers/staging/r8188eu/os_dep/os_intfs.c
+++ b/drivers/staging/r8188eu/os_dep/os_intfs.c
@@ -75,7 +75,6 @@ static int rtw_ampdu_amsdu;/* 0: disabled, 1:enabled, 2:auto */
static int rtw_lowrate_two_xmit = 1;/* Use 2 path Tx to transmit MCS0~7 and legacy mode */
-static int rtw_rf_config = RF_819X_MAX_TYPE; /* auto */
static int rtw_low_power;
static int rtw_wifi_spec;
static int rtw_channel_plan = RT_CHANNEL_DOMAIN_MAX;
@@ -123,7 +122,6 @@ module_param(rtw_ampdu_enable, int, 0644);
module_param(rtw_rx_stbc, int, 0644);
module_param(rtw_ampdu_amsdu, int, 0644);
module_param(rtw_lowrate_two_xmit, int, 0644);
-module_param(rtw_rf_config, int, 0644);
module_param(rtw_power_mgnt, int, 0644);
module_param(rtw_smart_ps, int, 0644);
module_param(rtw_low_power, int, 0644);
@@ -205,7 +203,6 @@ static uint loadparam(struct adapter *padapter, struct net_device *pnetdev)
registry_par->rx_stbc = (u8)rtw_rx_stbc;
registry_par->ampdu_amsdu = (u8)rtw_ampdu_amsdu;
registry_par->lowrate_two_xmit = (u8)rtw_lowrate_two_xmit;
- registry_par->rf_config = (u8)rtw_rf_config;
registry_par->low_power = (u8)rtw_low_power;
registry_par->wifi_spec = (u8)rtw_wifi_spec;
registry_par->channel_plan = (u8)rtw_channel_plan;
--
2.34.0
next prev parent reply other threads:[~2021-11-28 13:56 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-28 13:53 [PATCH 0/5] staging: r8188eu: remove rf_type and rtw_rf_config Michael Straube
2021-11-28 13:53 ` [PATCH 1/5] staging: r8188eu: remove rf_type from writeOFDMPowerReg88E() Michael Straube
2021-11-28 13:53 ` [PATCH 2/5] staging: r8188eu: remove rf_type from bb_reg_dump() Michael Straube
2021-11-28 13:53 ` [PATCH 3/5] staging: r8188eu: remove unused HW_VAR_RF_TYPE Michael Straube
2021-11-28 15:42 ` kernel test robot
2021-11-28 13:53 ` [PATCH 4/5] staging: r8188eu: remove rf_type from struct hal_data_8188e Michael Straube
2021-11-28 16:43 ` kernel test robot
2021-11-28 13:53 ` Michael Straube [this message]
2021-11-28 17:45 ` [PATCH 5/5] staging: r8188eu: remove module parameter rtw_rf_config kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211128135326.9838-6-straube.linux@gmail.com \
--to=straube.linux@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=phil@philpotter.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).