From: Yunus Bas <y.bas@phytec.de>
To: robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
devicetree@vger.kernel.org
Cc: kernel@pengutronix.de, festevam@gmail.com, linux-kernel@vger.kernel.org
Subject: [PATCH 1/3] ARM: dts: imx6qdl: phytec: Add support for optional PEB-EVAL-01 board
Date: Tue, 30 Nov 2021 09:53:53 +0100 [thread overview]
Message-ID: <20211130085355.2291607-1-y.bas@phytec.de> (raw)
The PHYTEC PEV-EVAL-01 expansion board adds support for additional
gpio-triggered user-leds and gpio-key support.
Signed-off-by: Yunus Bas <y.bas@phytec.de>
---
.../boot/dts/imx6dl-phytec-mira-rdk-nand.dts | 1 +
.../boot/dts/imx6q-phytec-mira-rdk-emmc.dts | 1 +
.../boot/dts/imx6q-phytec-mira-rdk-nand.dts | 1 +
.../dts/imx6qdl-phytec-mira-peb-eval-01.dtsi | 71 +++++++++++++++++++
.../boot/dts/imx6qp-phytec-mira-rdk-nand.dts | 1 +
5 files changed, 75 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6qdl-phytec-mira-peb-eval-01.dtsi
diff --git a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
index 9f7f9f98139d..b057fa664a6b 100644
--- a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
+++ b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
@@ -8,6 +8,7 @@
#include "imx6dl.dtsi"
#include "imx6qdl-phytec-phycore-som.dtsi"
#include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
/ {
model = "PHYTEC phyBOARD-Mira DualLite/Solo Carrier-Board with NAND";
diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
index 2e70ea5623c6..db6e2cc36759 100644
--- a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
+++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
@@ -8,6 +8,7 @@
#include "imx6q.dtsi"
#include "imx6qdl-phytec-phycore-som.dtsi"
#include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
/ {
model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with eMMC";
diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
index 65d2e483c136..51ff601b1aec 100644
--- a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
+++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
@@ -8,6 +8,7 @@
#include "imx6q.dtsi"
#include "imx6qdl-phytec-phycore-som.dtsi"
#include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
/ {
model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with NAND";
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-eval-01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-eval-01.dtsi
new file mode 100644
index 000000000000..3bcad402d3ec
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-eval-01.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+ status = "disabled";
+
+ home {
+ label = "Home";
+ gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_SLEEP>;
+ };
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WAKEUP>;
+ wakeup-source;
+ };
+ };
+
+ user_leds: user-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_user_leds>;
+ status = "disabled";
+
+ user-led1 {
+ gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "gpio";
+ default-state = "on";
+ };
+
+ user-led2 {
+ gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "gpio";
+ default-state = "on";
+ };
+
+ user-led3 {
+ gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "gpio";
+ default-state = "on";
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl_gpio_keys: gpiokeysgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x1b0b0
+ >;
+ };
+
+ pinctrl_user_leds: userledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
index f27d7ab42626..06fe0c5315fc 100644
--- a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
+++ b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
@@ -8,6 +8,7 @@
#include "imx6qp.dtsi"
#include "imx6qdl-phytec-phycore-som.dtsi"
#include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
/ {
model = "PHYTEC phyBOARD-Mira QuadPlus Carrier-Board with NAND";
--
2.25.1
next reply other threads:[~2021-11-30 9:08 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-30 8:53 Yunus Bas [this message]
2021-11-30 8:53 ` [PATCH 2/3] ARM: dts: imx6qdl: phytec: Add support for optional PEB-AV-02 LCD adapter Yunus Bas
2021-12-06 2:49 ` Shawn Guo
2021-12-13 11:40 ` Yunus Bas
2021-11-30 8:53 ` [PATCH 3/3] ARM: dts: imx6: phytec: Add PEB-WLBT-05 support Yunus Bas
2021-12-06 2:57 ` Shawn Guo
2021-12-13 12:21 ` Yunus Bas
2021-12-06 2:44 ` [PATCH 1/3] ARM: dts: imx6qdl: phytec: Add support for optional PEB-EVAL-01 board Shawn Guo
2021-12-13 11:34 ` Yunus Bas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211130085355.2291607-1-y.bas@phytec.de \
--to=y.bas@phytec.de \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).