From: Shay Drory <shayd@nvidia.com>
To: "David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>
Cc: <jiri@nvidia.com>, <saeedm@nvidia.com>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, Shay Drory <shayd@nvidia.com>,
Moshe Shemesh <moshe@nvidia.com>, Parav Pandit <parav@nvidia.com>
Subject: [PATCH net-next 4/4] net/mlx5: Let user configure max_macs generic param
Date: Tue, 30 Nov 2021 17:07:06 +0200 [thread overview]
Message-ID: <20211130150705.19863-5-shayd@nvidia.com> (raw)
In-Reply-To: <20211130150705.19863-1-shayd@nvidia.com>
Currently, max_macs is taking 70Kbytes of memory per function. This
size is not needed in all use cases, and is critical with large scale.
Hence, allow user to configure the number of max_macs.
For example, to reduce the number of max_macs to 1, execute::
$ devlink dev param set pci/0000:00:0b.0 name max_macs value 1 \
cmode driverinit
$ devlink dev reload pci/0000:00:0b.0
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
---
Documentation/networking/devlink/mlx5.rst | 4 ++
.../net/ethernet/mellanox/mlx5/core/devlink.c | 67 +++++++++++++++++++
.../net/ethernet/mellanox/mlx5/core/main.c | 18 +++++
include/linux/mlx5/mlx5_ifc.h | 2 +-
4 files changed, 90 insertions(+), 1 deletion(-)
diff --git a/Documentation/networking/devlink/mlx5.rst b/Documentation/networking/devlink/mlx5.rst
index 4e4b97f7971a..c44043bcae72 100644
--- a/Documentation/networking/devlink/mlx5.rst
+++ b/Documentation/networking/devlink/mlx5.rst
@@ -14,8 +14,12 @@ Parameters
* - Name
- Mode
+ - Validation
* - ``enable_roce``
- driverinit
+ * - ``max_macs``
+ - driverinit
+ - The range is between 1 and 2^31. Only power of 2 values are supported.
The ``mlx5`` driver also implements the following driver-specific
parameters.
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/devlink.c b/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
index 1c98652b244a..7383b727f49e 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
@@ -752,6 +752,66 @@ static void mlx5_devlink_auxdev_params_unregister(struct devlink *devlink)
mlx5_devlink_eth_param_unregister(devlink);
}
+static int mlx5_devlink_max_uc_list_validate(struct devlink *devlink, u32 id,
+ union devlink_param_value val,
+ struct netlink_ext_ack *extack)
+{
+ struct mlx5_core_dev *dev = devlink_priv(devlink);
+
+ if (val.vu32 == 0) {
+ NL_SET_ERR_MSG_MOD(extack, "max_macs value must be greater than 0");
+ return -EINVAL;
+ }
+
+ if (!is_power_of_2(val.vu32)) {
+ NL_SET_ERR_MSG_MOD(extack, "Only power of 2 values are supported for max_macs");
+ return -EINVAL;
+ }
+
+ if (ilog2(val.vu32) >
+ MLX5_CAP_GEN_MAX(dev, log_max_current_uc_list)) {
+ NL_SET_ERR_MSG_MOD(extack, "max_macs value is out of the supported range");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct devlink_param max_uc_list_param =
+ DEVLINK_PARAM_GENERIC(MAX_MACS, BIT(DEVLINK_PARAM_CMODE_DRIVERINIT),
+ NULL, NULL, mlx5_devlink_max_uc_list_validate);
+
+static int mlx5_devlink_max_uc_list_param_register(struct devlink *devlink)
+{
+ struct mlx5_core_dev *dev = devlink_priv(devlink);
+ union devlink_param_value value;
+ int err;
+
+ if (!MLX5_CAP_GEN_MAX(dev, log_max_current_uc_list_wr_supported))
+ return 0;
+
+ err = devlink_param_register(devlink, &max_uc_list_param);
+ if (err)
+ return err;
+
+ value.vu32 = 1 << MLX5_CAP_GEN(dev, log_max_current_uc_list);
+ devlink_param_driverinit_value_set(devlink,
+ DEVLINK_PARAM_GENERIC_ID_MAX_MACS,
+ value);
+ return 0;
+}
+
+static void
+mlx5_devlink_max_uc_list_param_unregister(struct devlink *devlink)
+{
+ struct mlx5_core_dev *dev = devlink_priv(devlink);
+
+ if (!MLX5_CAP_GEN(dev, log_max_current_uc_list_wr_supported))
+ return;
+
+ devlink_param_unregister(devlink, &max_uc_list_param);
+}
+
#define MLX5_TRAP_DROP(_id, _group_id) \
DEVLINK_TRAP_GENERIC(DROP, DROP, _id, \
DEVLINK_TRAP_GROUP_GENERIC_ID_##_group_id, \
@@ -815,11 +875,17 @@ int mlx5_devlink_register(struct devlink *devlink)
if (err)
goto traps_reg_err;
+ err = mlx5_devlink_max_uc_list_param_register(devlink);
+ if (err)
+ goto uc_list_reg_err;
+
if (!mlx5_core_is_mp_slave(dev))
devlink_set_features(devlink, DEVLINK_F_RELOAD);
return 0;
+uc_list_reg_err:
+ mlx5_devlink_traps_unregister(devlink);
traps_reg_err:
mlx5_devlink_auxdev_params_unregister(devlink);
auxdev_reg_err:
@@ -830,6 +896,7 @@ int mlx5_devlink_register(struct devlink *devlink)
void mlx5_devlink_unregister(struct devlink *devlink)
{
+ mlx5_devlink_max_uc_list_param_unregister(devlink);
mlx5_devlink_traps_unregister(devlink);
mlx5_devlink_auxdev_params_unregister(devlink);
devlink_params_unregister(devlink, mlx5_devlink_params,
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index f55a89bd3736..a6819575854f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -484,10 +484,23 @@ static int handle_hca_cap_odp(struct mlx5_core_dev *dev, void *set_ctx)
return set_caps(dev, set_ctx, MLX5_SET_HCA_CAP_OP_MOD_ODP);
}
+static int max_uc_list_get_devlink_param(struct mlx5_core_dev *dev)
+{
+ struct devlink *devlink = priv_to_devlink(dev);
+ union devlink_param_value val;
+ int err;
+
+ err = devlink_param_driverinit_value_get(devlink,
+ DEVLINK_PARAM_GENERIC_ID_MAX_MACS,
+ &val);
+ return err ? err : val.vu32;
+}
+
static int handle_hca_cap(struct mlx5_core_dev *dev, void *set_ctx)
{
struct mlx5_profile *prof = &dev->profile;
void *set_hca_cap;
+ int max_uc_list;
int err;
err = mlx5_core_get_caps(dev, MLX5_CAP_GENERAL);
@@ -561,6 +574,11 @@ static int handle_hca_cap(struct mlx5_core_dev *dev, void *set_ctx)
if (MLX5_CAP_GEN(dev, roce_rw_supported))
MLX5_SET(cmd_hca_cap, set_hca_cap, roce, mlx5_is_roce_init_enabled(dev));
+ max_uc_list = max_uc_list_get_devlink_param(dev);
+ if (max_uc_list > 0)
+ MLX5_SET(cmd_hca_cap, set_hca_cap, log_max_current_uc_list,
+ ilog2(max_uc_list));
+
return set_caps(dev, set_ctx, MLX5_SET_HCA_CAP_OP_MOD_GENERAL_DEVICE);
}
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index 3636df90899a..d3899fc33fd7 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -1621,7 +1621,7 @@ struct mlx5_ifc_cmd_hca_cap_bits {
u8 ext_stride_num_range[0x1];
u8 roce_rw_supported[0x1];
- u8 reserved_at_3a2[0x1];
+ u8 log_max_current_uc_list_wr_supported[0x1];
u8 log_max_stride_sz_rq[0x5];
u8 reserved_at_3a8[0x3];
u8 log_min_stride_sz_rq[0x5];
--
2.21.3
next prev parent reply other threads:[~2021-11-30 15:15 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-30 15:07 [PATCH net-next 0/4] net/mlx5: Memory optimizations Shay Drory
2021-11-30 15:07 ` [PATCH net-next 1/4] net/mlx5: Let user configure io_eq_size resource Shay Drory
2021-11-30 15:07 ` [PATCH net-next 2/4] net/mlx5: Let user configure event_eq_size resource Shay Drory
2021-11-30 15:07 ` [PATCH net-next 3/4] devlink: Clarifies max_macs generic devlink param Shay Drory
2021-11-30 15:07 ` Shay Drory [this message]
2021-11-30 19:39 ` [PATCH net-next 0/4] net/mlx5: Memory optimizations Jakub Kicinski
2021-12-01 8:22 ` Shay Drory
2021-12-02 17:31 ` Jakub Kicinski
2021-12-02 18:55 ` Saeed Mahameed
2021-12-03 1:28 ` Jakub Kicinski
2021-12-06 8:18 ` Jiri Pirko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211130150705.19863-5-shayd@nvidia.com \
--to=shayd@nvidia.com \
--cc=davem@davemloft.net \
--cc=jiri@nvidia.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=moshe@nvidia.com \
--cc=netdev@vger.kernel.org \
--cc=parav@nvidia.com \
--cc=saeedm@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).