From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 6E0D6C433F5 for ; Tue, 7 Dec 2021 12:16:09 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236167AbhLGMTi (ORCPT ); Tue, 7 Dec 2021 07:19:38 -0500 Received: from smtp01.smtpout.orange.fr ([80.12.242.123]:51578 "EHLO smtp.smtpout.orange.fr" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236152AbhLGMTh (ORCPT ); Tue, 7 Dec 2021 07:19:37 -0500 Received: from localhost.localdomain ([114.149.34.46]) by smtp.orange.fr with ESMTPA id uZNxmx8bRdmYbuZO4mwyQk; Tue, 07 Dec 2021 13:16:04 +0100 X-ME-Helo: localhost.localdomain X-ME-Auth: MDU0YmViZGZmMDIzYiBlMiM2NTczNTRjNWZkZTMwOGRiOGQ4ODf3NWI1ZTMyMzdiODlhOQ== X-ME-Date: Tue, 07 Dec 2021 13:16:04 +0100 X-ME-IP: 114.149.34.46 From: Vincent Mailhol To: Marc Kleine-Budde , linux-can@vger.kernel.org Cc: Oliver Hartkopp , Jimmy Assarsson , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, Vincent Mailhol Subject: [PATCH v5 0/5] fix statistics and payload issues for error Date: Tue, 7 Dec 2021 21:15:26 +0900 Message-Id: <20211207121531.42941-1-mailhol.vincent@wanadoo.fr> X-Mailer: git-send-email 2.32.0 MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Important: this patch series depends on below patch: https://lore.kernel.org/linux-can/20211123111654.621610-1-mailhol.vincent@wanadoo.fr/T/#u There are some common errors which are made when updating the network statistics or processing the CAN payload: 1. Incrementing the "normal" stats when generating or sending a CAN error message frame. Error message frames are an abstraction of Socket CAN and do not exist on the wire. The first patch of this series fixes the RX stats for 22 different drivers, the second one fixes the TX stasts for the kvaser driver (N.B. only this driver is capable of sending error on the bus). 2. Copying the payload of RTR frames: RTR frames have no payload and the data buffer only contains garbage. The DLC/length should not be used to do a memory copy. The third patch of this series address this issue for 3 different drivers. 3. Counting the length of the Remote Transmission Frames (RTR). The length of an RTR frame is the length of the requested frame not the actual payload. In reality the payload of an RTR frame is always 0 bytes long. The fourth patch of this series fixes the RX stats for 27 different drivers and the fifth one fixes the TX stats for 25 different ones. * Changelog * v4 -> v5: * at91_can: netdev_tx_t at91_start_xmit: replace | dev->stats.tx_bytes = ... by | dev->stats.tx_bytes += ... v3 -> v4: * patch 2/5: kvaser: include the suggestion from Jimmy Assarsson so that we don't need to get the original CAN frame anymore to determine whether or not it was an error frame. patch 5/5 is rebased accordingly. * patch 5/5: kvaser: kvaser_usb_hydra_frame_to_cmd_std: remove unrelated change. * patch 5/5: slcan: better factorize code for the tx RTR frames (reorder the line instead of adding a new "if" branch). v2 -> v3: * Fix an issue in the fourth patch ("do not increase rx_bytes statistics for RTR frames"). In ucan_rx_can_msg() of the ucan driver, the changes in v2 made no sense. Reverted it to v1. v1 -> v2: * can_rx_offload_napi_poll: v1 used CAN_ERR_MASK instead of CAN_ERR_FLAG. Fixed the issue. * use correct vocabulary. The correct term to designate the Socket CAN specific error skb is "error message frames" not "error frames". "error frames" is used in the standard and has a different meaning. * better factorize code for the rx RTR frames. Most of the drivers already have a switch to check if the frame is a RTR. Moved the instruction to increase net_device_stats:rx_bytes inside the else branch of those switches whenever possible (for some drivers with some complex logic, putting and additional RTR check was easier). * add a patch which prevent drivers to copy the payload of RTR frames. * add a patch to cover the tx RTR frames (the fifth patch of v2). The tx RTR frames issue was supposedly covered by the can_get_echo_skb() function which returns the correct length for drivers to increase their stats. However, the reality is that most of the drivers do not check this value and instead use a local copy of the length/dlc. Vincent Mailhol (5): can: do not increase rx statistics when generating a CAN rx error message frame can: kvaser_usb: do not increase tx statistics when sending error message frames can: do not copy the payload of RTR frames can: do not increase rx_bytes statistics for RTR frames can: do not increase tx_bytes statistics for RTR frames drivers/net/can/at91_can.c | 18 ++--- drivers/net/can/c_can/c_can.h | 1 - drivers/net/can/c_can/c_can_main.c | 16 ++--- drivers/net/can/cc770/cc770.c | 16 ++--- drivers/net/can/dev/dev.c | 4 -- drivers/net/can/dev/rx-offload.c | 7 +- drivers/net/can/grcan.c | 6 +- drivers/net/can/ifi_canfd/ifi_canfd.c | 11 +-- drivers/net/can/janz-ican3.c | 6 +- drivers/net/can/kvaser_pciefd.c | 16 ++--- drivers/net/can/m_can/m_can.c | 13 +--- drivers/net/can/mscan/mscan.c | 14 ++-- drivers/net/can/pch_can.c | 33 ++++----- drivers/net/can/peak_canfd/peak_canfd.c | 14 ++-- drivers/net/can/rcar/rcar_can.c | 22 +++--- drivers/net/can/rcar/rcar_canfd.c | 13 +--- drivers/net/can/sja1000/sja1000.c | 11 ++- drivers/net/can/slcan.c | 7 +- drivers/net/can/softing/softing_main.c | 8 +-- drivers/net/can/spi/hi311x.c | 31 ++++---- drivers/net/can/spi/mcp251x.c | 31 ++++---- drivers/net/can/sun4i_can.c | 22 +++--- drivers/net/can/usb/ems_usb.c | 14 ++-- drivers/net/can/usb/esd_usb2.c | 13 ++-- drivers/net/can/usb/etas_es58x/es58x_core.c | 7 -- drivers/net/can/usb/gs_usb.c | 7 +- drivers/net/can/usb/kvaser_usb/kvaser_usb.h | 5 +- .../net/can/usb/kvaser_usb/kvaser_usb_core.c | 4 +- .../net/can/usb/kvaser_usb/kvaser_usb_hydra.c | 71 +++++++++---------- .../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 20 ++---- drivers/net/can/usb/mcba_usb.c | 23 +++--- drivers/net/can/usb/peak_usb/pcan_usb.c | 9 ++- drivers/net/can/usb/peak_usb/pcan_usb_core.c | 20 +++--- drivers/net/can/usb/peak_usb/pcan_usb_core.h | 1 - drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 11 ++- drivers/net/can/usb/peak_usb/pcan_usb_pro.c | 12 ++-- drivers/net/can/usb/ucan.c | 17 +++-- drivers/net/can/usb/usb_8dev.c | 17 ++--- drivers/net/can/vcan.c | 7 +- drivers/net/can/vxcan.c | 2 +- drivers/net/can/xilinx_can.c | 19 +++-- include/linux/can/skb.h | 5 +- 42 files changed, 254 insertions(+), 350 deletions(-) base-commit: 11f2c3c57f37befb1af6ccac0defacb813411d9d -- 2.32.0