From: Alistair Francis <alistair@alistair23.me>
To: s.hauer@pengutronix.de, shawnguo@kernel.org,
dmitry.torokhov@gmail.com, benjamin.tissoires@redhat.com
Cc: jikos@kernel.org, linux-kernel@vger.kernel.org,
alistair23@gmail.com, linux-arm-kernel@lists.infradead.org,
linux-input@vger.kernel.org, Jason.Gerecke@wacom.com,
linux-imx@nxp.com, Ping.Cheng@wacom.com,
devicetree@vger.kernel.org, martin.chen@wacom.com,
tatsunosuke.tobita@wacom.com,
Alistair Francis <alistair@alistair23.me>,
Rob Herring <robh@kernel.org>
Subject: [PATCH v16 2/3] HID: i2c-hid-of: Expose the touchscreen-inverted properties
Date: Wed, 8 Dec 2021 22:40:44 +1000 [thread overview]
Message-ID: <20211208124045.61815-3-alistair@alistair23.me> (raw)
In-Reply-To: <20211208124045.61815-1-alistair@alistair23.me>
Allow the touchscreen-inverted-x/y device tree properties to control the
HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirks for the hid-input device.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/input/hid-over-i2c.txt | 2 ++
drivers/hid/i2c-hid/i2c-hid-acpi.c | 2 +-
drivers/hid/i2c-hid/i2c-hid-core.c | 4 +++-
drivers/hid/i2c-hid/i2c-hid-of-goodix.c | 2 +-
drivers/hid/i2c-hid/i2c-hid-of.c | 11 ++++++++++-
drivers/hid/i2c-hid/i2c-hid.h | 2 +-
6 files changed, 18 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
index c76bafaf98d2..34c43d3bddfd 100644
--- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
+++ b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
@@ -32,6 +32,8 @@ device-specific compatible properties, which should be used in addition to the
- vdd-supply: phandle of the regulator that provides the supply voltage.
- post-power-on-delay-ms: time required by the device after enabling its regulators
or powering it on, before it is ready for communication.
+- touchscreen-inverted-x: See touchscreen.txt
+- touchscreen-inverted-y: See touchscreen.txt
Example:
diff --git a/drivers/hid/i2c-hid/i2c-hid-acpi.c b/drivers/hid/i2c-hid/i2c-hid-acpi.c
index a6f0257a26de..b96ae15e0ad9 100644
--- a/drivers/hid/i2c-hid/i2c-hid-acpi.c
+++ b/drivers/hid/i2c-hid/i2c-hid-acpi.c
@@ -111,7 +111,7 @@ static int i2c_hid_acpi_probe(struct i2c_client *client)
}
return i2c_hid_core_probe(client, &ihid_acpi->ops,
- hid_descriptor_address);
+ hid_descriptor_address, 0);
}
static const struct acpi_device_id i2c_hid_acpi_match[] = {
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index 517141138b00..4804d71e5293 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -912,7 +912,7 @@ static void i2c_hid_core_shutdown_tail(struct i2c_hid *ihid)
}
int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
- u16 hid_descriptor_address)
+ u16 hid_descriptor_address, u32 quirks)
{
int ret;
struct i2c_hid *ihid;
@@ -1009,6 +1009,8 @@ int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
goto err_mem_free;
}
+ hid->quirks |= quirks;
+
return 0;
err_mem_free:
diff --git a/drivers/hid/i2c-hid/i2c-hid-of-goodix.c b/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
index 52674149a275..b4dad66fa954 100644
--- a/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
+++ b/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
@@ -150,7 +150,7 @@ static int i2c_hid_of_goodix_probe(struct i2c_client *client,
goodix_i2c_hid_deassert_reset(ihid_goodix, true);
mutex_unlock(&ihid_goodix->regulator_mutex);
- return i2c_hid_core_probe(client, &ihid_goodix->ops, 0x0001);
+ return i2c_hid_core_probe(client, &ihid_goodix->ops, 0x0001, 0);
}
static const struct goodix_i2c_hid_timing_data goodix_gt7375p_timing_data = {
diff --git a/drivers/hid/i2c-hid/i2c-hid-of.c b/drivers/hid/i2c-hid/i2c-hid-of.c
index 4bf7cea92637..b16349d6e9de 100644
--- a/drivers/hid/i2c-hid/i2c-hid-of.c
+++ b/drivers/hid/i2c-hid/i2c-hid-of.c
@@ -21,6 +21,7 @@
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/hid.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
#include <linux/module.h>
@@ -71,6 +72,7 @@ static int i2c_hid_of_probe(struct i2c_client *client,
struct device *dev = &client->dev;
struct i2c_hid_of *ihid_of;
u16 hid_descriptor_address;
+ u32 quirks = 0;
int ret;
u32 val;
@@ -105,8 +107,15 @@ static int i2c_hid_of_probe(struct i2c_client *client,
if (ret)
return ret;
+ if (device_property_read_bool(dev, "touchscreen-inverted-x")) {
+ quirks |= HID_QUIRK_X_INVERT;
+ }
+ if (device_property_read_bool(dev, "touchscreen-inverted-y")) {
+ quirks |= HID_QUIRK_Y_INVERT;
+ }
+
return i2c_hid_core_probe(client, &ihid_of->ops,
- hid_descriptor_address);
+ hid_descriptor_address, quirks);
}
static const struct of_device_id i2c_hid_of_match[] = {
diff --git a/drivers/hid/i2c-hid/i2c-hid.h b/drivers/hid/i2c-hid/i2c-hid.h
index 05a7827d211a..236cc062d5ef 100644
--- a/drivers/hid/i2c-hid/i2c-hid.h
+++ b/drivers/hid/i2c-hid/i2c-hid.h
@@ -32,7 +32,7 @@ struct i2chid_ops {
};
int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
- u16 hid_descriptor_address);
+ u16 hid_descriptor_address, u32 quirks);
int i2c_hid_core_remove(struct i2c_client *client);
void i2c_hid_core_shutdown(struct i2c_client *client);
--
2.31.1
next prev parent reply other threads:[~2021-12-08 12:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-08 12:40 [PATCH v16 0/3] Add Wacom I2C support to rM2 Alistair Francis
2021-12-08 12:40 ` [PATCH v16 1/3] HID: quirks: Allow inverting the absolute X/Y values Alistair Francis
2021-12-08 12:40 ` Alistair Francis [this message]
2021-12-08 12:40 ` [PATCH v16 3/3] ARM: dts: imx7d: remarkable2: add wacom digitizer device Alistair Francis
2021-12-16 3:08 ` Shawn Guo
2021-12-14 12:33 ` [PATCH v16 0/3] Add Wacom I2C support to rM2 Benjamin Tissoires
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211208124045.61815-3-alistair@alistair23.me \
--to=alistair@alistair23.me \
--cc=Jason.Gerecke@wacom.com \
--cc=Ping.Cheng@wacom.com \
--cc=alistair23@gmail.com \
--cc=benjamin.tissoires@redhat.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jikos@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.chen@wacom.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=tatsunosuke.tobita@wacom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).