From: Zi Yan <zi.yan@sent.com>
To: David Hildenbrand <david@redhat.com>, linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org,
Michael Ellerman <mpe@ellerman.id.au>,
Christoph Hellwig <hch@lst.de>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Robin Murphy <robin.murphy@arm.com>,
linuxppc-dev@lists.ozlabs.org,
virtualization@lists.linux-foundation.org,
iommu@lists.linux-foundation.org,
Vlastimil Babka <vbabka@suse.cz>,
Mel Gorman <mgorman@techsingularity.net>,
Eric Ren <renzhengeek@gmail.com>, Zi Yan <ziy@nvidia.com>
Subject: [RFC PATCH v2 5/7] mm: cma: use pageblock_order as the single alignment
Date: Thu, 9 Dec 2021 18:04:12 -0500 [thread overview]
Message-ID: <20211209230414.2766515-6-zi.yan@sent.com> (raw)
In-Reply-To: <20211209230414.2766515-1-zi.yan@sent.com>
From: Zi Yan <ziy@nvidia.com>
Now alloc_contig_range() works at pageblock granularity. Change CMA
allocation, which uses alloc_contig_range(), to use pageblock_order
alignment.
Signed-off-by: Zi Yan <ziy@nvidia.com>
---
include/linux/mmzone.h | 5 +----
kernel/dma/contiguous.c | 2 +-
mm/cma.c | 6 ++----
mm/page_alloc.c | 6 +++---
4 files changed, 7 insertions(+), 12 deletions(-)
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index b925431b0123..71830af35745 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -54,10 +54,7 @@ enum migratetype {
*
* The way to use it is to change migratetype of a range of
* pageblocks to MIGRATE_CMA which can be done by
- * __free_pageblock_cma() function. What is important though
- * is that a range of pageblocks must be aligned to
- * MAX_ORDER_NR_PAGES should biggest page be bigger than
- * a single pageblock.
+ * __free_pageblock_cma() function.
*/
MIGRATE_CMA,
#endif
diff --git a/kernel/dma/contiguous.c b/kernel/dma/contiguous.c
index 3d63d91cba5c..ac35b14b0786 100644
--- a/kernel/dma/contiguous.c
+++ b/kernel/dma/contiguous.c
@@ -399,7 +399,7 @@ static const struct reserved_mem_ops rmem_cma_ops = {
static int __init rmem_cma_setup(struct reserved_mem *rmem)
{
- phys_addr_t align = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order);
+ phys_addr_t align = PAGE_SIZE << pageblock_order;
phys_addr_t mask = align - 1;
unsigned long node = rmem->fdt_node;
bool default_cma = of_get_flat_dt_prop(node, "linux,cma-default", NULL);
diff --git a/mm/cma.c b/mm/cma.c
index bc9ca8f3c487..d171158bd418 100644
--- a/mm/cma.c
+++ b/mm/cma.c
@@ -180,8 +180,7 @@ int __init cma_init_reserved_mem(phys_addr_t base, phys_addr_t size,
return -EINVAL;
/* ensure minimal alignment required by mm core */
- alignment = PAGE_SIZE <<
- max_t(unsigned long, MAX_ORDER - 1, pageblock_order);
+ alignment = PAGE_SIZE << pageblock_order;
/* alignment should be aligned with order_per_bit */
if (!IS_ALIGNED(alignment >> PAGE_SHIFT, 1 << order_per_bit))
@@ -268,8 +267,7 @@ int __init cma_declare_contiguous_nid(phys_addr_t base,
* migratetype page by page allocator's buddy algorithm. In the case,
* you couldn't get a contiguous memory, which is not what we want.
*/
- alignment = max(alignment, (phys_addr_t)PAGE_SIZE <<
- max_t(unsigned long, MAX_ORDER - 1, pageblock_order));
+ alignment = max(alignment, (phys_addr_t)PAGE_SIZE << pageblock_order);
if (fixed && base & (alignment - 1)) {
ret = -EINVAL;
pr_err("Region at %pa must be aligned to %pa bytes\n",
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 5ffbeb1b7512..3317f2064105 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -9127,8 +9127,8 @@ static inline void split_free_page_into_pageblocks(struct page *free_page,
* be either of the two.
* @gfp_mask: GFP mask to use during compaction
*
- * The PFN range does not have to be pageblock or MAX_ORDER_NR_PAGES
- * aligned. The PFN range must belong to a single zone.
+ * The PFN range does not have to be pageblock aligned. The PFN range must
+ * belong to a single zone.
*
* The first thing this routine does is attempt to MIGRATE_ISOLATE all
* pageblocks in the range. Once isolated, the pageblocks should not
@@ -9243,7 +9243,7 @@ int alloc_contig_range(unsigned long start, unsigned long end,
ret = 0;
/*
- * Pages from [start, end) are within a MAX_ORDER_NR_PAGES
+ * Pages from [start, end) are within a pageblock_nr_pages
* aligned blocks that are marked as MIGRATE_ISOLATE. What's
* more, all pages in [start, end) are free in page allocator.
* What we are going to do is to allocate all pages from
--
2.33.0
next prev parent reply other threads:[~2021-12-09 23:04 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-09 23:04 [RFC PATCH v2 0/7] Use pageblock_order for cma and alloc_contig_range alignment Zi Yan
2021-12-09 23:04 ` [RFC PATCH v2 1/7] mm: page_alloc: avoid merging non-fallbackable pageblocks with others Zi Yan
2021-12-10 7:43 ` Eric Ren
2021-12-10 15:39 ` Zi Yan
2021-12-09 23:04 ` [RFC PATCH v2 2/7] mm: compaction: handle non-lru compound pages properly in isolate_migratepages_block() Zi Yan
2021-12-09 23:04 ` [RFC PATCH v2 3/7] mm: migrate: allocate the right size of non hugetlb or THP compound pages Zi Yan
2021-12-10 7:53 ` Eric Ren
2021-12-10 15:48 ` Zi Yan
2021-12-10 17:59 ` Yang Shi
2021-12-09 23:04 ` [RFC PATCH v2 4/7] mm: make alloc_contig_range work at pageblock granularity Zi Yan
2021-12-10 8:12 ` Eric Ren
2021-12-09 23:04 ` Zi Yan [this message]
2021-12-09 23:04 ` [RFC PATCH v2 6/7] drivers: virtio_mem: use pageblock size as the minimum virtio_mem size Zi Yan
2021-12-09 23:04 ` [RFC PATCH v2 7/7] arch: powerpc: adjust fadump alignment to be pageblock aligned Zi Yan
2021-12-10 7:30 ` [RFC PATCH v2 0/7] Use pageblock_order for cma and alloc_contig_range alignment Eric Ren
2021-12-10 15:30 ` Zi Yan
2021-12-10 18:36 ` David Hildenbrand
2021-12-10 20:17 ` Zi Yan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211209230414.2766515-6-zi.yan@sent.com \
--to=zi.yan@sent.com \
--cc=david@redhat.com \
--cc=hch@lst.de \
--cc=iommu@lists.linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=m.szyprowski@samsung.com \
--cc=mgorman@techsingularity.net \
--cc=mpe@ellerman.id.au \
--cc=renzhengeek@gmail.com \
--cc=robin.murphy@arm.com \
--cc=vbabka@suse.cz \
--cc=virtualization@lists.linux-foundation.org \
--cc=ziy@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).