[PATCH V5 4/6] dt-bindings: mfd: sensehat: Add Raspberry Pi Sense HAT schema

[Charles Mirabile <cmirabil@redhat.com>]

This patch adds the device tree binding
for the Sense HAT in yaml form.

Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
Co-developed-by: Mwesigwa Guma <mguma@redhat.com>
Signed-off-by: Mwesigwa Guma <mguma@redhat.com>
Co-developed-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
---
 .../bindings/mfd/raspberrypi,sensehat.yaml    | 54 +++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/raspberrypi,sensehat.yaml

diff --git a/Documentation/devicetree/bindings/mfd/raspberrypi,sensehat.yaml b/Documentation/devicetree/bindings/mfd/raspberrypi,sensehat.yaml
new file mode 100644
index 000000000000..a57d1face50e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/raspberrypi,sensehat.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+$id: http://devicetree.org/schemas/mfd/raspberrypi,sensehat.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raspberry Pi Sensehat
+
+maintainers:
+  - Charles Mirabile <cmirabil@redhat.com>
+  - Mwesigwa Guma <mguma@redhat.com>
+  - Joel Savitz <jsavitz@redhat.com>
+
+description:
+  The Raspberry Pi Sensehat is an addon board originally developed
+  for the Raspberry Pi that has a joystick and an 8x8 RGB LED display
+  as well as several environmental sensors. It connects via i2c and
+  a gpio for irq.
+
+properties:
+  compatible:
+    const: raspberrypi,sensehat
+
+  reg:
+    items:
+      - description: i2c bus address
+
+  interrupts:
+    items:
+      - description: pin number for joystick interrupt
+
+  interrupt-parent:
+    items:
+      - description: gpio pin bank for interrupt pin
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-parent
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      sensehat@46 {
+        compatible = "raspberrypi,sensehat";
+        reg = <0x46>;
+        interrupts = <23 GPIO_ACTIVE_HIGH>;
+        interrupt-parent = <&gpio>;
+      };
+    };
-- 
2.31.1