From: Pratyush Yadav <p.yadav@ti.com>
To: Vinod Koul <vkoul@kernel.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>,
Vignesh Raghavendra <vigneshr@ti.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Pratyush Yadav <p.yadav@ti.com>, Rob Herring <robh+dt@kernel.org>,
Swapnil Jakhade <sjakhade@cadence.com>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-phy@lists.infradead.org>
Subject: [PATCH v6 0/4] Rx mode support for Cadence DPHY
Date: Tue, 14 Dec 2021 23:36:59 +0530 [thread overview]
Message-ID: <20211214180703.3268-1-p.yadav@ti.com> (raw)
Hi,
This series adds support for Cadence DPHY Rx driver. It has been split
off from [0] to facilitate easier merging. I have still kept the version
number to maintain continuity with the previous patches. The earlier
version used the same binding for Tx and Rx DPHY. With the separate
driver, I have added a separate binding. But I am still keeping the old
conversion patch in this series since I have already done the work in
converting the binding to yaml, might as well get it merged.
Tested on TI's J721E with OV5640 sensor.
[0] https://patchwork.linuxtv.org/project/linux-media/list/?series=5526&state=%2A&archive=both
Changes in v6:
- Add a new binding for DPHY Rx.
- Move the DPHY Rx part to a separate driver.
- Drop Rx specific changes from the cdns,dphy.yaml binding. Keep those
in cdns,dphy-rx.yaml
Changes in v5:
- Use the new cdns_dphy_info to specify PHY ops.
- Re-order include in alphabetical order.
- Make bands const.
- Drop num_bands.
- Make i, lanes unsigned.
- Drop the maximum check in cdns_dphy_rx_get_band_ctrl(). Let the loop
complete and return -EOPNOTSUPP when we reach the end.
- Drop the "rate < bands[i].min_rate" check since the bands are in
ascending order.
- Move data_lane_ctrl to start of function and make it static const.
Changes in v4:
- Drop the submode parts. Use a different compatible for the Rx ops.
- Make bands and num_bands static.
- Drop the submode patches. Use a different compatible for Rx mode DPHY
instead.
Changes in v3:
- Use a table to select the band.
- Use a table to poll the data lane ready bits.
- Multiply the DPHY HS clock rate by 2 to get the bit rate since the
clock is DDR.
- Add Rob's R-by.
Changes in v2:
- Drop reg description.
- Add a description for each DPHY clock.
- Rename dphy@... to phy@... in example.
- Add Laurent's R-by.
- Re-order subject prefixes.
- Add power-domain to the example.
- Add Laurent's R-by.
- Re-order subject prefixes.
Pratyush Yadav (4):
phy: cadence: Add Cadence D-PHY Rx driver
phy: dt-bindings: Convert Cadence DPHY binding to YAML
phy: dt-bindings: cdns,dphy: add power-domains property
phy: dt-bindings: Add Cadence D-PHY Rx bindings
.../devicetree/bindings/phy/cdns,dphy-rx.yaml | 42 +++
.../devicetree/bindings/phy/cdns,dphy.txt | 20 --
.../devicetree/bindings/phy/cdns,dphy.yaml | 56 ++++
drivers/phy/cadence/Kconfig | 8 +
drivers/phy/cadence/Makefile | 1 +
drivers/phy/cadence/cdns-dphy-rx.c | 250 ++++++++++++++++++
6 files changed, 357 insertions(+), 20 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy-rx.yaml
delete mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt
create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.yaml
create mode 100644 drivers/phy/cadence/cdns-dphy-rx.c
--
2.33.1.835.ge9e5ba39a7
next reply other threads:[~2021-12-14 18:07 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-14 18:06 Pratyush Yadav [this message]
2021-12-14 18:07 ` [PATCH v6 1/4] phy: cadence: Add Cadence D-PHY Rx driver Pratyush Yadav
2021-12-20 15:31 ` Paul Kocialkowski
2021-12-22 18:45 ` Pratyush Yadav
2021-12-23 5:36 ` Vinod Koul
2021-12-14 18:07 ` [PATCH v6 2/4] phy: dt-bindings: Convert Cadence DPHY binding to YAML Pratyush Yadav
2021-12-14 18:07 ` [PATCH v6 3/4] phy: dt-bindings: cdns,dphy: add power-domains property Pratyush Yadav
2021-12-14 18:07 ` [PATCH v6 4/4] phy: dt-bindings: Add Cadence D-PHY Rx bindings Pratyush Yadav
2021-12-15 21:31 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211214180703.3268-1-p.yadav@ti.com \
--to=p.yadav@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=paul.kocialkowski@bootlin.com \
--cc=robh+dt@kernel.org \
--cc=sjakhade@cadence.com \
--cc=tomi.valkeinen@ideasonboard.com \
--cc=vigneshr@ti.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).