linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Liam Beguin <liambeguin@gmail.com>
To: liambeguin@gmail.com, peda@axentia.se, jic23@kernel.org, lars@metafoo.de
Cc: linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
	devicetree@vger.kernel.org, robh+dt@kernel.org
Subject: [PATCH v10 11/14] iio: afe: rescale: add RTD temperature sensor support
Date: Sun, 19 Dec 2021 17:39:50 -0500	[thread overview]
Message-ID: <20211219223953.16074-12-liambeguin@gmail.com> (raw)
In-Reply-To: <20211219223953.16074-1-liambeguin@gmail.com>

From: Liam Beguin <lvb@xiphos.com>

An RTD (Resistance Temperature Detector) is a kind of temperature
sensor used to get a linear voltage to temperature reading within a
give range (usually 0 to 100 degrees Celsius). Common types of RTDs
include PT100, PT500, and PT1000.

Signed-off-by: Liam Beguin <lvb@xiphos.com>
---
 drivers/iio/afe/iio-rescale.c | 48 +++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/drivers/iio/afe/iio-rescale.c b/drivers/iio/afe/iio-rescale.c
index 4ab19a730a57..cde39432196a 100644
--- a/drivers/iio/afe/iio-rescale.c
+++ b/drivers/iio/afe/iio-rescale.c
@@ -393,10 +393,52 @@ static int rescale_voltage_divider_props(struct device *dev,
 	return 0;
 }
 
+static int rescale_temp_sense_rtd_props(struct device *dev,
+					struct rescale *rescale)
+{
+	u32 factor;
+	u32 alpha;
+	u32 iexc;
+	u32 tmp;
+	int ret;
+	u32 r0;
+
+	ret = device_property_read_u32(dev, "excitation-current-microamp",
+				       &iexc);
+	if (ret) {
+		dev_err(dev, "failed to read excitation-current-microamp: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = device_property_read_u32(dev, "alpha-ppm-per-celsius", &alpha);
+	if (ret) {
+		dev_err(dev, "failed to read alpha-ppm-per-celsius: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = device_property_read_u32(dev, "r-naught-ohms", &r0);
+	if (ret) {
+		dev_err(dev, "failed to read r-naught-ohms: %d\n", ret);
+		return ret;
+	}
+
+	tmp = r0 * iexc * alpha / 1000000;
+	factor = gcd(tmp, 1000000);
+	rescale->numerator = 1000000 / factor;
+	rescale->denominator = tmp / factor;
+
+	rescale->offset = -1 * ((r0 * iexc) / 1000);
+
+	return 0;
+}
+
 enum rescale_variant {
 	CURRENT_SENSE_AMPLIFIER,
 	CURRENT_SENSE_SHUNT,
 	VOLTAGE_DIVIDER,
+	TEMP_SENSE_RTD,
 };
 
 static const struct rescale_cfg rescale_cfg[] = {
@@ -412,6 +454,10 @@ static const struct rescale_cfg rescale_cfg[] = {
 		.type = IIO_VOLTAGE,
 		.props = rescale_voltage_divider_props,
 	},
+	[TEMP_SENSE_RTD] = {
+		.type = IIO_TEMP,
+		.props = rescale_temp_sense_rtd_props,
+	},
 };
 
 static const struct of_device_id rescale_match[] = {
@@ -421,6 +467,8 @@ static const struct of_device_id rescale_match[] = {
 	  .data = &rescale_cfg[CURRENT_SENSE_SHUNT], },
 	{ .compatible = "voltage-divider",
 	  .data = &rescale_cfg[VOLTAGE_DIVIDER], },
+	{ .compatible = "temperature-sense-rtd",
+	  .data = &rescale_cfg[TEMP_SENSE_RTD], },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, rescale_match);
-- 
2.34.0


  parent reply	other threads:[~2021-12-19 22:40 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-19 22:39 [PATCH v10 00/14] iio: afe: add temperature rescaling support Liam Beguin
2021-12-19 22:39 ` [PATCH v10 01/14] iio: inkern: apply consumer scale on IIO_VAL_INT cases Liam Beguin
2021-12-19 22:39 ` [PATCH v10 02/14] iio: inkern: apply consumer scale when no channel scale is available Liam Beguin
2021-12-19 22:39 ` [PATCH v10 03/14] iio: inkern: make a best effort on offset calculation Liam Beguin
2021-12-21  5:42   ` Andy Shevchenko
2021-12-21 17:50     ` Liam Beguin
2021-12-19 22:39 ` [PATCH v10 04/14] iio: afe: rescale: expose scale processing function Liam Beguin
     [not found]   ` <CAHp75VdfPf6FMvkGqhhQg5e5XE1cgE-K8seobe5n0yGarnPGtQ@mail.gmail.com>
2021-12-21  5:43     ` Andy Shevchenko
2021-12-22  2:28       ` Liam Beguin
2021-12-19 22:39 ` [PATCH v10 05/14] iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support Liam Beguin
2021-12-19 22:39 ` [PATCH v10 06/14] iio: afe: rescale: add offset support Liam Beguin
2021-12-19 22:39 ` [PATCH v10 07/14] iio: afe: rescale: use s64 for temporary scale calculations Liam Beguin
2021-12-19 22:39 ` [PATCH v10 08/14] iio: afe: rescale: fix accuracy for small fractional scales Liam Beguin
2021-12-19 22:39 ` [PATCH v10 09/14] iio: afe: rescale: reduce risk of integer overflow Liam Beguin
2021-12-19 22:39 ` [PATCH v10 10/14] iio: test: add basic tests for the iio-rescale driver Liam Beguin
2021-12-21  7:09   ` kernel test robot
2021-12-21  8:03   ` kernel test robot
2021-12-19 22:39 ` Liam Beguin [this message]
2021-12-19 22:39 ` [PATCH v10 12/14] iio: afe: rescale: add temperature transducers Liam Beguin
2021-12-19 22:39 ` [PATCH v10 13/14] dt-bindings: iio: afe: add bindings for temperature-sense-rtd Liam Beguin
2021-12-19 22:39 ` [PATCH v10 14/14] dt-bindings: iio: afe: add bindings for temperature transducers Liam Beguin
2021-12-20 21:37 ` [PATCH v10 00/14] iio: afe: add temperature rescaling support Peter Rosin
2021-12-22  3:29   ` Liam Beguin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211219223953.16074-12-liambeguin@gmail.com \
    --to=liambeguin@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peda@axentia.se \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).