From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7066BC433EF for ; Wed, 29 Dec 2021 16:39:54 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S240837AbhL2Qjx convert rfc822-to-8bit (ORCPT ); Wed, 29 Dec 2021 11:39:53 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:35408 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S240794AbhL2Qjw (ORCPT ); Wed, 29 Dec 2021 11:39:52 -0500 Received: from dfw.source.kernel.org (dfw.source.kernel.org [IPv6:2604:1380:4641:c500::1]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 68B2BC061574; Wed, 29 Dec 2021 08:39:52 -0800 (PST) Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by dfw.source.kernel.org (Postfix) with ESMTPS id ECAE3614B5; Wed, 29 Dec 2021 16:39:51 +0000 (UTC) Received: from jic23-huawei (cpc108967-cmbg20-2-0-cust86.5-4.cable.virginm.net [81.101.6.87]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.kernel.org (Postfix) with ESMTPSA id 7E677C36AE7; Wed, 29 Dec 2021 16:39:47 +0000 (UTC) Date: Wed, 29 Dec 2021 16:45:31 +0000 From: Jonathan Cameron To: William Breathitt Gray Cc: David Lechner , David Jander , Uwe =?UTF-8?B?S2xlaW5lLUvDtm5pZw==?= , linux-iio@vger.kernel.org, Robin van der Gracht , linux-kernel@vger.kernel.org, Oleksij Rempel , Pengutronix Kernel Team Subject: Re: [PATCH v1] counter: interrupt-cnt: add counter_push_event() Message-ID: <20211229164531.7cb24f1c@jic23-huawei> In-Reply-To: References: <20211124072720.GA30281@pengutronix.de> <20211207081602.45b1423c@erd992> <20211208135902.7j3aawytt3jlqgwr@pengutronix.de> <20211208171035.6ad117af@erd992> <20211215100853.11f9262d@erd992> <7a717808-2a06-975b-cd91-5362b784d0bf@lechnology.com> X-Mailer: Claws Mail 4.0.0 (GTK+ 3.24.31; x86_64-pc-linux-gnu) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8BIT Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Wed, 29 Dec 2021 18:26:06 +0900 William Breathitt Gray wrote: > On Mon, Dec 27, 2021 at 09:16:31AM -0600, David Lechner wrote: > > On 12/24/21 10:07 PM, William Breathitt Gray wrote: > > > On Wed, Dec 15, 2021 at 10:08:53AM +0100, David Jander wrote: > > >> > > >> Dear William, > > >> > > >> On Wed, 15 Dec 2021 17:48:26 +0900 > > >> William Breathitt Gray wrote: > > >> > > >>> On Wed, Dec 08, 2021 at 05:10:35PM +0100, David Jander wrote: > > >>>> > > >>>> Dear Uwe, > > >>>> > > >>>> On Wed, 8 Dec 2021 14:59:02 +0100 > > >>>> Uwe Kleine-König wrote: > > >>>> > > >>>>> Hello David, > > >>>>> > > >>>>> On Tue, Dec 07, 2021 at 08:16:02AM +0100, David Jander wrote: > > >>>>>> On Mon, 6 Dec 2021 13:24:18 -0600 > > >>>>>> David Lechner wrote: > > >>>>>> > > >>>>>>> On 11/24/21 7:58 PM, William Breathitt Gray wrote: > > >>>>>>>> On Wed, Nov 24, 2021 at 08:27:20AM +0100, Oleksij Rempel wrote: > > >>>>>>>>> Hi William, > > >>>>>>>>> > > >>>>>>>>> On Wed, Nov 24, 2021 at 03:09:05PM +0900, William Breathitt Gray wrote: > > >>>>>>>>>> On Tue, Nov 23, 2021 at 02:45:40PM +0100, Oleksij Rempel wrote: > > >>>>>>>>>>> Add counter_push_event() to notify user space about new pulses > > >>>>>>>>>>> > > >>>>>>>>>>> Signed-off-by: Oleksij Rempel > > >>>>>>>>>>> --- > > >>>>>>>>>>> drivers/counter/interrupt-cnt.c | 2 ++ > > >>>>>>>>>>> 1 file changed, 2 insertions(+) > > >>>>>>>>>>> > > >>>>>>>>>>> diff --git a/drivers/counter/interrupt-cnt.c b/drivers/counter/interrupt-cnt.c > > >>>>>>>>>>> index 8514a87fcbee..b237137b552b 100644 > > >>>>>>>>>>> --- a/drivers/counter/interrupt-cnt.c > > >>>>>>>>>>> +++ b/drivers/counter/interrupt-cnt.c > > >>>>>>>>>>> @@ -31,6 +31,8 @@ static irqreturn_t interrupt_cnt_isr(int irq, void *dev_id) > > >>>>>>>>>>> > > >>>>>>>>>>> atomic_inc(&priv->count); > > >>>>>>>>>>> > > >>>>>>>>>>> + counter_push_event(&priv->counter, COUNTER_EVENT_OVERFLOW, 0); > > >>>>>>>>>>> + > > >>>>>>>>>>> return IRQ_HANDLED; > > >>>>>>>>>>> } > > >>>>>>>>>>> > > >>>>>>>>>>> -- > > >>>>>>>>>>> 2.30.2 > > >>>>>>>>>> > > >>>>>>>>>> Hi Oleksij, > > >>>>>>>>>> > > >>>>>>>>>> It looks like this is pushing a COUNTER_EVENT_OVERFLOW event every time > > >>>>>>>>>> an interrupt is handled, which I suspect is not what you want to happen. > > >>>>>>>>>> The COUNTER_EVENT_OVERFLOW event indicates a count value overflow event, > > >>>>>>>>>> so you'll need to check for a count value overflow before pushing the > > >>>>>>>>>> event. > > >>>>>>>>>> > > >>>>>>>>>> It would be good idea to implement a ceiling extension as well (you can > > >>>>>>>>>> use the COUNTER_COMP_CEILING() macro) so that users can configure the > > >>>>>>>>>> particular point where the value overflows. > > >>>>>>>>> > > >>>>>>>>> Thank you! > > >>>>>>>>> > > >>>>>>>>> What would be the best and resource effective strategy for periodically > > >>>>>>>>> getting frequency of interrupts/pulses? This is actual information which is > > >>>>>>>>> needed for my use case. > > >>>>>>>>> > > >>>>>>>>> So far, I was pushing every event to the user space, which is working > > >>>>>>>>> but probably not the most resource effective method of doing it. > > >>>>>>>>> > > >>>>>>>>> Regards, > > >>>>>>>>> Oleskij > > >>>>>>>>> -- > > >>>>>>>>> Pengutronix e.K. | | > > >>>>>>>>> Steuerwalder Str. 21 | http://www.pengutronix.de/ | > > >>>>>>>>> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > > >>>>>>>>> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > > >>>>>>>> > > >>>>>>>> We could introduce a new Counter change-of-state event type which would > > >>>>>>>> trigger whenever the count value changes, but I agree with you that this > > >>>>>>>> is likely not the best way for us to derive the frequency of the > > >>>>>>>> interrupts due to the indirection of handling and parsing the event > > >>>>>>>> data. > > >>>>>>>> > > >>>>>>>> Instead, perhaps introducing a "frequency" or "period" Count extension > > >>>>>>>> would make more sense here. This extension could report the value delta > > >>>>>>>> between counts, or alternatively the time delta from which you can > > >>>>>>>> derive frequency. Regarding implementation, you can store the previous > > >>>>>>>> value in a variable, updating it whenever an interrupt occurs, and > > >>>>>>>> compute the particular delta every time a read is requested by the user. > > >>>>>>>> > > >>>>>>>> David Lechner is implementing something similar for the TI eQEP driver > > >>>>>>>> to expose speed, so I'm CCing them here in case this is of interest to > > >>>>>>>> them. > > >>>>>>>> > > >>>>>>> > > >>>>>>> Based on my experience, I would recommend that counter drivers be as > > >>>>>>> "thin" as possible. They shouldn't try to provide any information that > > >>>>>>> the hardware itself doesn't provide. In other words, the kernel should > > >>>>>>> provide userspace the information needed to calculate the speed/rate > > >>>>>>> but not try to do the actual calculation in the kernel. Inevitably > > >>>>>>> there are nuances for specific use cases that can't all possibly be > > >>>>>>> handled by such an implementation. > > >>>>>> > > >>>>>> I completely agree with this. While interrupts aren't really meant for > > >>>>>> measuring frequency, and this being somewhat of a mis-use of something, it is > > >>>>>> still possible to do and very useful in many cases. That said, while the > > >>>>>> counter framework is AFAIK the best fit for this, the main use-case for this > > >>>>>> driver is measuring wheel speed (and similar "speeds"). For this, the minimum > > >>>>>> amount of information the driver needs to provide user-space with to do > > >>>>>> reliable calculations, is high-resolution time-stamps of GPIO events. A simple > > >>>>>> counter is not suited, because there can be glitches that need to be detected. > > >>>>>> If user-space gets a buffer full of consecutive time-stamps (don't need to be > > >>>>>> all of them, just a sample of n consecutive timestamps), as well as total > > >>>>>> count, all needed calculations, glitch filtering, low-pass filtering, etc... > > >>>>>> can be done in user-space just fine. > > >>>>>> > > >>>>>>> I've tried using gpio interrupts to try to calculate speed/rate in > > >>>>>>> the kernel before and it simply doesn't work reliably. Interrupts > > >>>>>>> get missed and the calculation will be off. > > >>>>>> > > >>>>>> Exactly. Been there, done that. > > >>>>>> For reliable speed calculations of a mechanical system, the properties of the > > >>>>>> mechanical system need to be known, like physical limits of accelerations, > > >>>>>> maximum (or minimum) speed, etc. The minimum set of input data needed by a > > >>>>>> user-space application to do these calculations is total pulse count in > > >>>>>> addition to a buffer of timestamps of n consecutive input events (raising or > > >>>>>> falling edges on GPIO). So IMHO this is what the driver should provide, and > > >>>>>> in the most resource-efficient way possible. This particular driver will be > > >>>>>> used 3 times on the same SoC, with each up to 10-15k pulses per second. That > > >>>>>> is a lot of interrupts for an embedded system, so they better consume as > > >>>>>> little resources as possible. Filling a ring buffer with timestamps should be > > >>>>>> possible, as long as no locking is involved. Locks in IRQ context must be > > >>>>>> avoided at all costs, specially in this case. > > >>>>>> > > >>>>>>> For really slow counts (i.e. 1 count/second), I can see a use for > > >>>>>>> generating an event on each count though. For high rates, I would > > >>>>>>> just read the count every 100ms in usespace and divide the change in > > >>>>>>> the number of counts by the time period to get the rate. > > >>>>>> > > >>>>>> For slow counts, I agree, but for high rates, I don't (see above). There can > > >>>>>> be glitches and false events that can (and must) be effectively filtered out. > > >>>>>> For that user-space needs to know the time of each event during the > > >>>>>> measurement period. > > >>>>> > > >>>>> No sure I understood the problem here. If you keep the driver as is and > > >>>>> in userspace just read out the counter value twice and measure the time > > >>>>> between the reads[1], you can calculate the average frequency of the > > >>>>> event in userspace. > > >>>>> > > >>>>> Isn't that good enough? > > >>>> > > >>>> No, I'm afraid it isn't, for two reasons: > > >>>> > > >>>> 1. These counters are often used in environments, where glitches can and do > > >>>> happen. So sometimes there are fake events. The only way to tell fake from > > >>>> real pulses, is to filter them. Unfortunately you need the timestamps of each > > >>>> event for that. > > >>>> > > >>>> 2. Another reason for having time-stamps is the case when the frequency is low > > >>>> and one still requires fast accurate measurements. In that case timestamps > > >>>> provide a way of accurately measuring period time. > > >>>> > > >>>> Best regards, > > >>>> > > >>>> -- > > >>>> David Jander > > >>>> Protonic Holland. > > >>> > > >>> Keeping drivers focused on just exposing the hardware data and > > >>> functionality is likely the best path to choose, so my earlier > > >>> suggestion of a "frequency" extension would better be left for userspace > > >>> to handle. > > >> > > >> I agree. > > >> > > >>> So in order to enable userspace to derive frequency, you need reliable > > >>> timestamps for enough consecutive events to provide an adequate size > > >>> sample of data on which to perform filtering and other such operations. > > >> > > >> Ack. > > >> > > >>> If we add a COUNTER_EVENT_CHANGE_OF_STATE or similar, every count change > > >>> will generate an event with a logged timestamp. Is the problem with this > > >>> solution primarily that the Counter event queue is currently utilizing > > >>> spinlocks for synchronization? > > >> > > >> Yes. Basically, since one can expect a very high amount of IRQs, it seems > > >> paramount to eliminate any source of latency (spinlocks, etc...) from > > >> interrupt context as well as to keep CPU load as low as technically possible. > > >> > > >> If a spinlock is used, and at 10kHz pulses, on a moderately fast embedded SoC, > > >> it is IMHO quite possible to have user-space cause the spinlock to be held for > > >> more than 100 microseconds, thus causing a pulse to be missed. Not to mention > > >> slight jitter introduced to the timestamps that can cause user-space to falsely > > >> filter out events (a software PLL that doesn't correctly lock). > > >> > > >> The ideal ISR in this case would only take a timestamp from a hardware TSC (or > > >> similarly latency-free direct source) and put it into a circular buffer > > >> without using locks, and maybe increase an unsigned long counter value (atomic > > >> operation if MB's are correctly used) and nothing else. > > >> If, for example, such a solution would require user-space access CPU > > >> load (complexity) to increase by a factor of 10 or even more (in order to > > >> avoid locks), this is likely still preferable, since the ISR is executed maybe > > >> 1000+ times more often than user-space accessing the driver. > > >> > > >> Best regards, > > >> > > >> -- > > >> David Jander > > >> Protonic Holland. > > > > > > So the counter_push_event() function interacts with two spinlocks: > > > events_list_lock and events_in_lock. The events_list_lock spinlock is > > > necessary because userspace can modify the events_list list via the > > > counter_enable_events() and counter_disable_events() functions. The > > > events_in_lock spinlock is necessary because userspace can modify the > > > events kfifo via the counter_events_queue_size_write() function. > > > > > > A lockless solution for this might be possible if the driver maintains > > > its own circular buffer as you suggest. The driver's IRQ handler can > > > write to this circular buffer without calling the counter_push_event() > > > function, and then flush the buffer to the Counter character device via > > > a userspace write to a "flush_events" sysfs attribute or similar; this > > > eliminates the need for the events_in_lock spinlock. The state of the > > > events_list list can be captured in the driver's events_configure() > > > callback and stored locally in the driver for reference, thus > > > eliminating the need for the events_list_lock; interrupts can be > > > disabled before the driver's local copy of events_list is modified. > > > > > > With only one reader and one writer operating on the driver's buffer, > > > you can use the normal kfifo_in and kfifo_out calls for lockless > > > operations. Perhaps that is a way forward for this problem. > > > > > > > Would it be possible to make it so that userspace can't modify the > > events_list when IRQs are enabled? Then we wouldn't have to add asecond event buffer. > > > > IIRC, the only operations that modify events_list are when another > > list replaces events_list when events are enabled and when > > events_list is cleared when events are disabled. So as long as the > > ordering is right with respect to enabling and disabling IRQs, it > > seems like the spin lock should not be needed. > > I think that could work. If IRQs are always disabled before events_list > is modified, then there is never a risk of interacting with an invalid > events_list and thus counter_push_events() won't need spinlocks. When > IRQs are disabled we miss any possible events, but we are missing those > already anyway when the events_list is modified. I wonder if an RCU approach would be cleaner and perhaps give the performance necessary? https://www.kernel.org/doc/html/latest/RCU/listRCU.html > > William Breathitt Gray