From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
To: Tomasz Figa <tomasz.figa@gmail.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
Sam Protsenko <semen.protsenko@linaro.org>,
Chanho Park <chanho61.park@samsung.com>,
Alim Akhtar <alim.akhtar@gmail.com>
Subject: [PATCH v2 14/28] ARM: dts: exynos: align pinctrl with dtschema in Exynos5260
Date: Tue, 11 Jan 2022 21:17:08 +0100 [thread overview]
Message-ID: <20220111201722.327219-8-krzysztof.kozlowski@canonical.com> (raw)
In-Reply-To: <20220111201426.326777-1-krzysztof.kozlowski@canonical.com>
Align the pin controller related nodes with dtschema. No functional
change expected.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
arch/arm/boot/dts/exynos5260-pinctrl.dtsi | 148 ++++++++++-----------
arch/arm/boot/dts/exynos5260-xyref5260.dts | 2 +-
2 files changed, 75 insertions(+), 75 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
index 17e2f3e0d71e..150607f8103d 100644
--- a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
@@ -12,7 +12,7 @@
#include <dt-bindings/pinctrl/samsung.h>
&pinctrl_0 {
- gpa0: gpa0 {
+ gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -20,7 +20,7 @@ gpa0: gpa0 {
#interrupt-cells = <2>;
};
- gpa1: gpa1 {
+ gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -28,7 +28,7 @@ gpa1: gpa1 {
#interrupt-cells = <2>;
};
- gpa2: gpa2 {
+ gpa2: gpa2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -36,7 +36,7 @@ gpa2: gpa2 {
#interrupt-cells = <2>;
};
- gpb0: gpb0 {
+ gpb0: gpb0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -44,7 +44,7 @@ gpb0: gpb0 {
#interrupt-cells = <2>;
};
- gpb1: gpb1 {
+ gpb1: gpb1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -52,7 +52,7 @@ gpb1: gpb1 {
#interrupt-cells = <2>;
};
- gpb2: gpb2 {
+ gpb2: gpb2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -60,7 +60,7 @@ gpb2: gpb2 {
#interrupt-cells = <2>;
};
- gpb3: gpb3 {
+ gpb3: gpb3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -68,7 +68,7 @@ gpb3: gpb3 {
#interrupt-cells = <2>;
};
- gpb4: gpb4 {
+ gpb4: gpb4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -76,7 +76,7 @@ gpb4: gpb4 {
#interrupt-cells = <2>;
};
- gpb5: gpb5 {
+ gpb5: gpb5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -84,7 +84,7 @@ gpb5: gpb5 {
#interrupt-cells = <2>;
};
- gpd0: gpd0 {
+ gpd0: gpd0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -92,7 +92,7 @@ gpd0: gpd0 {
#interrupt-cells = <2>;
};
- gpd1: gpd1 {
+ gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -100,7 +100,7 @@ gpd1: gpd1 {
#interrupt-cells = <2>;
};
- gpd2: gpd2 {
+ gpd2: gpd2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -108,7 +108,7 @@ gpd2: gpd2 {
#interrupt-cells = <2>;
};
- gpe0: gpe0 {
+ gpe0: gpe0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -116,7 +116,7 @@ gpe0: gpe0 {
#interrupt-cells = <2>;
};
- gpe1: gpe1 {
+ gpe1: gpe1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -124,7 +124,7 @@ gpe1: gpe1 {
#interrupt-cells = <2>;
};
- gpf0: gpf0 {
+ gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -132,7 +132,7 @@ gpf0: gpf0 {
#interrupt-cells = <2>;
};
- gpf1: gpf1 {
+ gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -140,7 +140,7 @@ gpf1: gpf1 {
#interrupt-cells = <2>;
};
- gpk0: gpk0 {
+ gpk0: gpk0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -148,7 +148,7 @@ gpk0: gpk0 {
#interrupt-cells = <2>;
};
- gpx0: gpx0 {
+ gpx0: gpx0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -164,7 +164,7 @@ gpx0: gpx0 {
#interrupt-cells = <2>;
};
- gpx1: gpx1 {
+ gpx1: gpx1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -180,7 +180,7 @@ gpx1: gpx1 {
#interrupt-cells = <2>;
};
- gpx2: gpx2 {
+ gpx2: gpx2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -188,7 +188,7 @@ gpx2: gpx2 {
#interrupt-cells = <2>;
};
- gpx3: gpx3 {
+ gpx3: gpx3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -196,63 +196,63 @@ gpx3: gpx3 {
#interrupt-cells = <2>;
};
- uart0_data: uart0-data {
+ uart0_data: uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- uart0_fctl: uart0-fctl {
+ uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- uart1_data: uart1-data {
+ uart1_data: uart1-data-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- uart1_fctl: uart1-fctl {
+ uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- uart2_data: uart2-data {
+ uart2_data: uart2-data-pins {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- spi0_bus: spi0-bus {
+ spi0_bus: spi0-bus-pins {
samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- spi1_bus: spi1-bus {
+ spi1_bus: spi1-bus-pins {
samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- usb3_vbus0_en: usb3-vbus0-en {
+ usb3_vbus0_en: usb3-vbus0-en-pins {
samsung,pins = "gpa2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2s1_bus: i2s1-bus {
+ i2s1_bus: i2s1-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -260,7 +260,7 @@ i2s1_bus: i2s1-bus {
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- pcm1_bus: pcm1-bus {
+ pcm1_bus: pcm1-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -268,105 +268,105 @@ pcm1_bus: pcm1-bus {
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- spdif1_bus: spdif1-bus {
+ spdif1_bus: spdif1-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- spi2_bus: spi2-bus {
+ spi2_bus: spi2-bus-pins {
samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c0_hs_bus: i2c0-hs-bus {
+ i2c0_hs_bus: i2c0-hs-bus-pins {
samsung,pins = "gpb3-0", "gpb3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c1_hs_bus: i2c1-hs-bus {
+ i2c1_hs_bus: i2c1-hs-bus-pins {
samsung,pins = "gpb3-2", "gpb3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c2_hs_bus: i2c2-hs-bus {
+ i2c2_hs_bus: i2c2-hs-bus-pins {
samsung,pins = "gpb3-4", "gpb3-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c3_hs_bus: i2c3-hs-bus {
+ i2c3_hs_bus: i2c3-hs-bus-pins {
samsung,pins = "gpb3-6", "gpb3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c4_bus: i2c4-bus {
+ i2c4_bus: i2c4-bus-pins {
samsung,pins = "gpb4-0", "gpb4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c5_bus: i2c5-bus {
+ i2c5_bus: i2c5-bus-pins {
samsung,pins = "gpb4-2", "gpb4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c6_bus: i2c6-bus {
+ i2c6_bus: i2c6-bus-pins {
samsung,pins = "gpb4-4", "gpb4-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c7_bus: i2c7-bus {
+ i2c7_bus: i2c7-bus-pins {
samsung,pins = "gpb4-6", "gpb4-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c8_bus: i2c8-bus {
+ i2c8_bus: i2c8-bus-pins {
samsung,pins = "gpb5-0", "gpb5-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c9_bus: i2c9-bus {
+ i2c9_bus: i2c9-bus-pins {
samsung,pins = "gpb5-2", "gpb5-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c10_bus: i2c10-bus {
+ i2c10_bus: i2c10-bus-pins {
samsung,pins = "gpb5-4", "gpb5-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c11_bus: i2c11-bus {
+ i2c11_bus: i2c11-bus-pins {
samsung,pins = "gpb5-6", "gpb5-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- cam_gpio_a: cam-gpio-a {
+ cam_gpio_a: cam-gpio-a-pins {
samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
"gpe1-0", "gpe1-1";
@@ -375,7 +375,7 @@ cam_gpio_a: cam-gpio-a {
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- cam_gpio_b: cam-gpio-b {
+ cam_gpio_b: cam-gpio-b-pins {
samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -383,28 +383,28 @@ cam_gpio_b: cam-gpio-b {
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- cam_i2c1_bus: cam-i2c1-bus {
+ cam_i2c1_bus: cam-i2c1-bus-pins {
samsung,pins = "gpf0-2", "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- cam_i2c0_bus: cam-i2c0-bus {
+ cam_i2c0_bus: cam-i2c0-bus-pins {
samsung,pins = "gpf0-0", "gpf0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- cam_spi0_bus: cam-spi0-bus {
+ cam_spi0_bus: cam-spi0-bus-pins {
samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- cam_spi1_bus: cam-spi1-bus {
+ cam_spi1_bus: cam-spi1-bus-pins {
samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -413,7 +413,7 @@ cam_spi1_bus: cam-spi1-bus {
};
&pinctrl_1 {
- gpc0: gpc0 {
+ gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -421,7 +421,7 @@ gpc0: gpc0 {
#interrupt-cells = <2>;
};
- gpc1: gpc1 {
+ gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -429,7 +429,7 @@ gpc1: gpc1 {
#interrupt-cells = <2>;
};
- gpc2: gpc2 {
+ gpc2: gpc2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -437,7 +437,7 @@ gpc2: gpc2 {
#interrupt-cells = <2>;
};
- gpc3: gpc3 {
+ gpc3: gpc3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -445,7 +445,7 @@ gpc3: gpc3 {
#interrupt-cells = <2>;
};
- gpc4: gpc4 {
+ gpc4: gpc4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -453,112 +453,112 @@ gpc4: gpc4 {
#interrupt-cells = <2>;
};
- sd0_clk: sd0-clk {
+ sd0_clk: sd0-clk-pins {
samsung,pins = "gpc0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd0_cmd: sd0-cmd {
+ sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpc0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd0_bus1: sd0-bus-width1 {
+ sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpc0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd0_bus4: sd0-bus-width4 {
+ sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd0_bus8: sd0-bus-width8 {
+ sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd0_rdqs: sd0-rdqs {
+ sd0_rdqs: sd0-rdqs-pins {
samsung,pins = "gpc0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd1_clk: sd1-clk {
+ sd1_clk: sd1-clk-pins {
samsung,pins = "gpc1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd1_cmd: sd1-cmd {
+ sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpc1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd1_bus1: sd1-bus-width1 {
+ sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpc1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd1_bus4: sd1-bus-width4 {
+ sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd1_bus8: sd1-bus-width8 {
+ sd1_bus8: sd1-bus-width8-pins {
samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd2_clk: sd2-clk {
+ sd2_clk: sd2-clk-pins {
samsung,pins = "gpc2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd2_cmd: sd2-cmd {
+ sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpc2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd2_cd: sd2-cd {
+ sd2_cd: sd2-cd-pins {
samsung,pins = "gpc2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd2_bus1: sd2-bus-width1 {
+ sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpc2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd2_bus4: sd2-bus-width4 {
+ sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -567,7 +567,7 @@ sd2_bus4: sd2-bus-width4 {
};
&pinctrl_2 {
- gpz0: gpz0 {
+ gpz0: gpz0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -575,7 +575,7 @@ gpz0: gpz0 {
#interrupt-cells = <2>;
};
- gpz1: gpz1 {
+ gpz1: gpz1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts
index 0dc2ec16aa0a..82d8441c8908 100644
--- a/arch/arm/boot/dts/exynos5260-xyref5260.dts
+++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts
@@ -38,7 +38,7 @@ xrtcxti: xrtcxti {
};
&pinctrl_0 {
- hdmi_hpd_irq: hdmi-hpd-irq {
+ hdmi_hpd_irq: hdmi-hpd-irq-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
--
2.32.0
next prev parent reply other threads:[~2022-01-11 20:18 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-11 20:13 [PATCH v2 00/28] pinctrl: dt-bindings: samsung: convert to dtschema Krzysztof Kozlowski
2022-01-11 20:13 ` [PATCH v2 01/28] pinctrl: samsung: drop pin banks references on error paths Krzysztof Kozlowski
2022-01-12 5:28 ` Chanho Park
2022-01-14 16:38 ` Sam Protsenko
2022-01-11 20:14 ` [PATCH v2 02/28] pinctrl: samsung: accept GPIO bank nodes with a suffix Krzysztof Kozlowski
2022-01-14 17:00 ` Sam Protsenko
2022-01-11 20:14 ` [PATCH v2 03/28] ARM: dts: exynos: drop unused pinctrl defines in Exynos3250 Krzysztof Kozlowski
2022-01-11 20:14 ` [PATCH v2 04/28] ARM: dts: exynos: simplify PMIC DVS pin configuration in Odroid XU Krzysztof Kozlowski
2022-01-11 20:14 ` [PATCH v2 05/28] ARM: dts: exynos: override pins by label in Peach Pit Krzysztof Kozlowski
2022-01-11 20:14 ` [PATCH v2 06/28] ARM: dts: exynos: simplify PMIC DVS pin configuration " Krzysztof Kozlowski
2022-01-11 20:17 ` [PATCH v2 07/28] ARM: dts: exynos: override pins by label in Peach Pi Krzysztof Kozlowski
2022-01-11 20:17 ` [PATCH v2 08/28] ARM: dts: exynos: simplify PMIC DVS pin configuration " Krzysztof Kozlowski
2022-01-11 20:17 ` [PATCH v2 09/28] ARM: dts: s3c64xx: drop unneeded pinctrl wake-up interrupt mapping Krzysztof Kozlowski
2022-01-11 20:17 ` [PATCH v2 10/28] ARM: dts: exynos: align pinctrl with dtschema in Exynos3250 Krzysztof Kozlowski
2022-01-11 20:17 ` [PATCH v2 11/28] ARM: dts: exynos: align pinctrl with dtschema in Exynos4210 Krzysztof Kozlowski
2022-01-11 20:17 ` [PATCH v2 12/28] ARM: dts: exynos: align pinctrl with dtschema in Exynos4412 Krzysztof Kozlowski
2022-01-11 20:17 ` [PATCH v2 13/28] ARM: dts: exynos: align pinctrl with dtschema in Exynos5250 Krzysztof Kozlowski
2022-01-11 20:17 ` Krzysztof Kozlowski [this message]
2022-01-11 20:17 ` [PATCH v2 15/28] ARM: dts: exynos: align pinctrl with dtschema in Exynos5410 Krzysztof Kozlowski
2022-01-11 20:17 ` [PATCH v2 16/28] ARM: dts: exynos: align pinctrl with dtschema in Exynos542x/5800 Krzysztof Kozlowski
2022-01-11 20:17 ` [PATCH v2 17/28] arm64: dts: exynos: align pinctrl with dtschema in Exynos5433 Krzysztof Kozlowski
2022-01-11 20:17 ` [PATCH v2 18/28] arm64: dts: exynos: align pinctrl with dtschema in Exynos7 Krzysztof Kozlowski
2022-01-16 15:34 ` Alim Akhtar
2022-01-11 20:17 ` [PATCH v2 19/28] arm64: dts: exynos: align pinctrl with dtschema in Exynos850 Krzysztof Kozlowski
2022-01-11 20:17 ` [PATCH v2 20/28] arm64: dts: exynos: align pinctrl with dtschema in ExynosAutov9 Krzysztof Kozlowski
2022-01-12 5:21 ` Chanho Park
2022-01-14 16:40 ` Sam Protsenko
2022-01-11 20:17 ` [PATCH v2 21/28] ARM: dts: s3c24xx: align pinctrl with dtschema Krzysztof Kozlowski
2022-01-11 20:17 ` [PATCH v2 22/28] ARM: dts: s3c64xx: " Krzysztof Kozlowski
2022-01-11 20:17 ` [PATCH v2 23/28] ARM: dts: s5pv210: " Krzysztof Kozlowski
2022-01-11 20:17 ` [PATCH v2 24/28] dt-bindings: pinctrl: samsung: convert to dtschema Krzysztof Kozlowski
2022-01-16 0:55 ` Linus Walleij
2022-01-16 17:10 ` Krzysztof Kozlowski
2022-01-16 21:38 ` Linus Walleij
2022-01-17 7:45 ` Krzysztof Kozlowski
2022-01-17 20:26 ` Olof Johansson
2022-01-18 7:52 ` Krzysztof Kozlowski
2022-01-11 20:17 ` [PATCH v2 25/28] dt-bindings: pinctrl: samsung: describe Exynos850 and ExynosAutov9 wake-ups Krzysztof Kozlowski
2022-01-12 2:26 ` Rob Herring
2022-01-14 19:44 ` Sam Protsenko
2022-01-11 20:17 ` [PATCH v2 26/28] pinctrl: samsung: add support for " Krzysztof Kozlowski
2022-01-12 5:21 ` Chanho Park
2022-01-14 16:39 ` Sam Protsenko
2022-01-11 20:17 ` [PATCH v2 27/28] arm64: dts: exynos: use dedicated wake-up pinctrl compatible in Exynos850 Krzysztof Kozlowski
2022-01-14 18:34 ` Sam Protsenko
2022-01-11 20:17 ` [PATCH v2 28/28] arm64: dts: exynos: use dedicated wake-up pinctrl compatible in ExynosAutov9 Krzysztof Kozlowski
2022-01-12 5:28 ` Chanho Park
2022-01-14 16:31 ` Sam Protsenko
2022-01-14 18:31 ` [PATCH v2 00/28] pinctrl: dt-bindings: samsung: convert to dtschema Sam Protsenko
2022-01-15 15:46 ` Krzysztof Kozlowski
2022-01-23 11:46 ` Krzysztof Kozlowski
2022-01-23 17:09 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220111201722.327219-8-krzysztof.kozlowski@canonical.com \
--to=krzysztof.kozlowski@canonical.com \
--cc=alim.akhtar@gmail.com \
--cc=chanho61.park@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=robh+dt@kernel.org \
--cc=s.nawrocki@samsung.com \
--cc=semen.protsenko@linaro.org \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).