From: Werner Sembach <wse@tuxedocomputers.com>
To: dmitry.torokhov@gmail.com, tiwai@suse.com, mpdesouza@suse.com,
arnd@arndb.de, samuel@cavoj.net, linux-input@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH][RESEND] input/i8042: Add quirk table to disable aux port on Clevo NS70MU
Date: Fri, 14 Jan 2022 18:16:23 +0100 [thread overview]
Message-ID: <20220114171623.729343-1-wse@tuxedocomputers.com> (raw)
At least one modern Clevo barebone has the touchpad connected both via PS/2
and i2c interface. This causes a race condition between the psmouse and
i2c-hid driver. Since the full capability if the touchpad is available via
the i2c interface and the device has no external PS/2 port, it is save to
just ignore all ps2 mouses here to avoid this issue.
The know affected device is the Clevo NS70MU.
This patch add a new i8042_dmi_noaux_table with the dmi strings of the
affected device of different revisions. The table is then evaluated like
the other quirk tables in the i8042 driver.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
---
drivers/input/serio/i8042-x86ia64io.h | 42 +++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 148a7c5fd0e2..48ad6247a1a0 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -1013,6 +1013,45 @@ static const struct dmi_system_id i8042_dmi_probe_defer_table[] __initconst = {
{ }
};
+static const struct dmi_system_id i8042_dmi_noaux_table[] __initconst = {
+ /*
+ * At least one modern Clevo barebone has the touchpad connected
+ * both via PS/2 and i2c interface. This causes a race condition
+ * between the psmouse and i2c-hid driver. Since the full
+ * capability if the touchpad is available via the i2c interface
+ * and the device has no external PS/2 port, it is save to just
+ * ignore all ps2 mouses here to avoid this issue.
+ * The know affected device is the
+ * TUXEDO InfinityBook S17 Gen6 / Clevo NS70MU which comes with
+ * one of the 4 different dmi string combinations below.
+ */
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+ DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
+ },
+ },
+ { }
+};
+
#endif /* CONFIG_X86 */
#ifdef CONFIG_PNP
@@ -1336,6 +1375,9 @@ static int __init i8042_platform_init(void)
if (dmi_check_system(i8042_dmi_probe_defer_table))
i8042_probe_defer = true;
+ if (dmi_check_system(i8042_dmi_noaux_table))
+ i8042_noaux = true;
+
/*
* A20 was already enabled during early kernel init. But some buggy
* BIOSes (in MSI Laptops) require A20 to be enabled using 8042 to
--
2.25.1
next reply other threads:[~2022-01-14 17:16 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-14 17:16 Werner Sembach [this message]
-- strict thread matches above, loose matches on Subject: below --
2022-01-14 17:12 [PATCH][RESEND] input/i8042: Add quirk table to disable aux port on Clevo NS70MU Werner Sembach
2022-01-14 17:15 ` Werner Sembach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220114171623.729343-1-wse@tuxedocomputers.com \
--to=wse@tuxedocomputers.com \
--cc=arnd@arndb.de \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mpdesouza@suse.com \
--cc=samuel@cavoj.net \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).