* [PATCH v5 0/9] Support Spi in i2c-multi-instantiate driver
@ 2022-01-21 14:32 Stefan Binding
2022-01-21 14:32 ` [PATCH v5 1/9] spi: Make spi_alloc_device and spi_add_device public again Stefan Binding
` (8 more replies)
0 siblings, 9 replies; 18+ messages in thread
From: Stefan Binding @ 2022-01-21 14:32 UTC (permalink / raw)
To: Mark Brown, Rafael J . Wysocki, Len Brown, Hans de Goede,
Mark Gross, Jaroslav Kysela, Takashi Iwai
Cc: alsa-devel, linux-kernel, linux-spi, linux-acpi,
platform-driver-x86, patches, Stefan Binding
Add support for SPI bus in the i2c-multi-instantiate driver as
upcoming laptops will need to multi instantiate SPI devices from
a single device node, which has multiple SpiSerialBus entries at
the ACPI table.
With the new SPI support, i2c-multi-instantiate becomes
bus-multi-instantiate and is moved to the ACPI folder.
The intention is to support the SPI bus by re-using the current
I2C multi instantiate, instead of creating a new SPI multi
instantiate, to make it possible for peripherals that can be
controlled by I2C or SPI to have the same HID at the ACPI table.
The new driver (serial multi instantiate, smi) checks for the
hard-coded bus type and returns -ENODEV in case of zero devices
found for that bus. In the case of automatic bus detection,
the driver will give preference to I2C.
The expectation is for a device node in the ACPI table to have
multiple I2cSerialBus only or multiple SpiSerialBus only, not
a mix of both; and for the case where there are both entries in
one device node, only the I2C ones would be probed.
This new serial multi instantiate will be used in CS35L41 HDA new
driver.
Changes since V4:
- renamed bus-multi-instantiate to serial-multi-instantiate
- various minor fixes in serial-multi-instantiate
- fix returns in serial-multi-instantiate
- removed unnecessary stubs in spi.h
- re-order SSIDs in patch_realtek.c
Lucas Tanure (4):
platform/x86: i2c-multi-instantiate: Rename it for a generic serial
driver name
platform/x86: serial-multi-instantiate: Reorganize I2C functions
ALSA: hda/realtek: Add support for HP Laptops
ACPI / scan: Create platform device for CS35L41
Stefan Binding (5):
spi: Make spi_alloc_device and spi_add_device public again
spi: Create helper API to lookup ACPI info for spi device
spi: Support selection of the index of the ACPI Spi Resource before
alloc
spi: Add API to count spi acpi resources
platform/x86: serial-multi-instantiate: Add SPI support
MAINTAINERS | 4 +-
drivers/acpi/scan.c | 16 +-
drivers/platform/x86/Kconfig | 14 +-
drivers/platform/x86/Makefile | 2 +-
drivers/platform/x86/i2c-multi-instantiate.c | 174 ---------
.../platform/x86/serial-multi-instantiate.c | 346 ++++++++++++++++++
drivers/spi/spi.c | 137 ++++++-
include/linux/spi/spi.h | 20 +
sound/pci/hda/patch_realtek.c | 43 ++-
9 files changed, 549 insertions(+), 207 deletions(-)
delete mode 100644 drivers/platform/x86/i2c-multi-instantiate.c
create mode 100644 drivers/platform/x86/serial-multi-instantiate.c
--
2.25.1
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH v5 1/9] spi: Make spi_alloc_device and spi_add_device public again
2022-01-21 14:32 [PATCH v5 0/9] Support Spi in i2c-multi-instantiate driver Stefan Binding
@ 2022-01-21 14:32 ` Stefan Binding
2022-01-21 14:32 ` [PATCH v5 2/9] spi: Create helper API to lookup ACPI info for spi device Stefan Binding
` (7 subsequent siblings)
8 siblings, 0 replies; 18+ messages in thread
From: Stefan Binding @ 2022-01-21 14:32 UTC (permalink / raw)
To: Mark Brown, Rafael J . Wysocki, Len Brown, Hans de Goede,
Mark Gross, Jaroslav Kysela, Takashi Iwai
Cc: alsa-devel, linux-kernel, linux-spi, linux-acpi,
platform-driver-x86, patches, Stefan Binding
This functions were previously made private since they
were not used. However, these functions will be needed
again.
Partial revert of commit da21fde0fdb3
("spi: Make several public functions private to spi.c")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
---
drivers/spi/spi.c | 6 ++++--
include/linux/spi/spi.h | 12 ++++++++++++
2 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 4599b121d744..1eb84101c4ad 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -532,7 +532,7 @@ static DEFINE_MUTEX(board_lock);
*
* Return: a pointer to the new device, or NULL.
*/
-static struct spi_device *spi_alloc_device(struct spi_controller *ctlr)
+struct spi_device *spi_alloc_device(struct spi_controller *ctlr)
{
struct spi_device *spi;
@@ -557,6 +557,7 @@ static struct spi_device *spi_alloc_device(struct spi_controller *ctlr)
device_initialize(&spi->dev);
return spi;
}
+EXPORT_SYMBOL_GPL(spi_alloc_device);
static void spi_dev_set_name(struct spi_device *spi)
{
@@ -652,7 +653,7 @@ static int __spi_add_device(struct spi_device *spi)
*
* Return: 0 on success; negative errno on failure
*/
-static int spi_add_device(struct spi_device *spi)
+int spi_add_device(struct spi_device *spi)
{
struct spi_controller *ctlr = spi->controller;
struct device *dev = ctlr->dev.parent;
@@ -673,6 +674,7 @@ static int spi_add_device(struct spi_device *spi)
mutex_unlock(&ctlr->add_lock);
return status;
}
+EXPORT_SYMBOL_GPL(spi_add_device);
static int spi_add_device_locked(struct spi_device *spi)
{
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 7ab3fed7b804..0346a3ff27fd 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -1452,7 +1452,19 @@ spi_register_board_info(struct spi_board_info const *info, unsigned n)
* use spi_new_device() to describe each device. You can also call
* spi_unregister_device() to start making that device vanish, but
* normally that would be handled by spi_unregister_controller().
+ *
+ * You can also use spi_alloc_device() and spi_add_device() to use a two
+ * stage registration sequence for each spi_device. This gives the caller
+ * some more control over the spi_device structure before it is registered,
+ * but requires that caller to initialize fields that would otherwise
+ * be defined using the board info.
*/
+extern struct spi_device *
+spi_alloc_device(struct spi_controller *ctlr);
+
+extern int
+spi_add_device(struct spi_device *spi);
+
extern struct spi_device *
spi_new_device(struct spi_controller *, struct spi_board_info *);
--
2.25.1
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v5 2/9] spi: Create helper API to lookup ACPI info for spi device
2022-01-21 14:32 [PATCH v5 0/9] Support Spi in i2c-multi-instantiate driver Stefan Binding
2022-01-21 14:32 ` [PATCH v5 1/9] spi: Make spi_alloc_device and spi_add_device public again Stefan Binding
@ 2022-01-21 14:32 ` Stefan Binding
2022-01-21 14:32 ` [PATCH v5 3/9] spi: Support selection of the index of the ACPI Spi Resource before alloc Stefan Binding
` (6 subsequent siblings)
8 siblings, 0 replies; 18+ messages in thread
From: Stefan Binding @ 2022-01-21 14:32 UTC (permalink / raw)
To: Mark Brown, Rafael J . Wysocki, Len Brown, Hans de Goede,
Mark Gross, Jaroslav Kysela, Takashi Iwai
Cc: alsa-devel, linux-kernel, linux-spi, linux-acpi,
platform-driver-x86, patches, Stefan Binding
This can then be used to find a spi resource inside an
ACPI node, and allocate a spi device.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
---
drivers/spi/spi.c | 46 ++++++++++++++++++++++++++++++++---------
include/linux/spi/spi.h | 6 ++++++
2 files changed, 42 insertions(+), 10 deletions(-)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 1eb84101c4ad..13f4701f0694 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -2410,8 +2410,18 @@ static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
return 1;
}
-static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
- struct acpi_device *adev)
+/**
+ * acpi_spi_device_alloc - Allocate a spi device, and fill it in with ACPI information
+ * @ctlr: controller to which the spi device belongs
+ * @adev: ACPI Device for the spi device
+ *
+ * This should be used to allocate a new spi device from and ACPI Node.
+ * The caller is responsible for calling spi_add_device to register the spi device.
+ *
+ * Return: a pointer to the new device, or ERR_PTR on error.
+ */
+struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
+ struct acpi_device *adev)
{
acpi_handle parent_handle = NULL;
struct list_head resource_list;
@@ -2419,10 +2429,6 @@ static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
struct spi_device *spi;
int ret;
- if (acpi_bus_get_status(adev) || !adev->status.present ||
- acpi_device_enumerated(adev))
- return AE_OK;
-
lookup.ctlr = ctlr;
lookup.irq = -1;
@@ -2433,7 +2439,7 @@ static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
if (ret < 0)
/* found SPI in _CRS but it points to another controller */
- return AE_OK;
+ return ERR_PTR(-ENODEV);
if (!lookup.max_speed_hz &&
ACPI_SUCCESS(acpi_get_parent(adev->handle, &parent_handle)) &&
@@ -2443,16 +2449,15 @@ static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
}
if (!lookup.max_speed_hz)
- return AE_OK;
+ return ERR_PTR(-ENODEV);
spi = spi_alloc_device(ctlr);
if (!spi) {
dev_err(&ctlr->dev, "failed to allocate SPI device for %s\n",
dev_name(&adev->dev));
- return AE_NO_MEMORY;
+ return ERR_PTR(-ENOMEM);
}
-
ACPI_COMPANION_SET(&spi->dev, adev);
spi->max_speed_hz = lookup.max_speed_hz;
spi->mode |= lookup.mode;
@@ -2460,6 +2465,27 @@ static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
spi->bits_per_word = lookup.bits_per_word;
spi->chip_select = lookup.chip_select;
+ return spi;
+}
+EXPORT_SYMBOL_GPL(acpi_spi_device_alloc);
+
+static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
+ struct acpi_device *adev)
+{
+ struct spi_device *spi;
+
+ if (acpi_bus_get_status(adev) || !adev->status.present ||
+ acpi_device_enumerated(adev))
+ return AE_OK;
+
+ spi = acpi_spi_device_alloc(ctlr, adev);
+ if (IS_ERR(spi)) {
+ if (PTR_ERR(spi) == -ENOMEM)
+ return AE_NO_MEMORY;
+ else
+ return AE_OK;
+ }
+
acpi_set_modalias(adev, acpi_device_hid(adev), spi->modalias,
sizeof(spi->modalias));
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 0346a3ff27fd..d159cef12f1a 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -16,6 +16,7 @@
#include <linux/gpio/consumer.h>
#include <uapi/linux/spi/spi.h>
+#include <linux/acpi.h>
struct dma_chan;
struct software_node;
@@ -759,6 +760,11 @@ extern int devm_spi_register_controller(struct device *dev,
struct spi_controller *ctlr);
extern void spi_unregister_controller(struct spi_controller *ctlr);
+#if IS_ENABLED(CONFIG_ACPI)
+extern struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
+ struct acpi_device *adev);
+#endif
+
/*
* SPI resource management while processing a SPI message
*/
--
2.25.1
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v5 3/9] spi: Support selection of the index of the ACPI Spi Resource before alloc
2022-01-21 14:32 [PATCH v5 0/9] Support Spi in i2c-multi-instantiate driver Stefan Binding
2022-01-21 14:32 ` [PATCH v5 1/9] spi: Make spi_alloc_device and spi_add_device public again Stefan Binding
2022-01-21 14:32 ` [PATCH v5 2/9] spi: Create helper API to lookup ACPI info for spi device Stefan Binding
@ 2022-01-21 14:32 ` Stefan Binding
2022-01-21 14:32 ` [PATCH v5 4/9] spi: Add API to count spi acpi resources Stefan Binding
` (5 subsequent siblings)
8 siblings, 0 replies; 18+ messages in thread
From: Stefan Binding @ 2022-01-21 14:32 UTC (permalink / raw)
To: Mark Brown, Rafael J . Wysocki, Len Brown, Hans de Goede,
Mark Gross, Jaroslav Kysela, Takashi Iwai
Cc: alsa-devel, linux-kernel, linux-spi, linux-acpi,
platform-driver-x86, patches, Stefan Binding
If a node contains more than one Spi Resources, it may be necessary to
use an index to select which one you want to allocate a spi device for.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
---
drivers/spi/spi.c | 51 +++++++++++++++++++++++++++++++++++------
include/linux/spi/spi.h | 3 ++-
2 files changed, 46 insertions(+), 8 deletions(-)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 13f4701f0694..06c0a308b38b 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -2320,6 +2320,8 @@ struct acpi_spi_lookup {
int irq;
u8 bits_per_word;
u8 chip_select;
+ int n;
+ int index;
};
static void acpi_spi_parse_apple_properties(struct acpi_device *dev,
@@ -2351,6 +2353,8 @@ static void acpi_spi_parse_apple_properties(struct acpi_device *dev,
lookup->mode |= SPI_CPHA;
}
+static struct spi_controller *acpi_spi_find_controller_by_adev(struct acpi_device *adev);
+
static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
{
struct acpi_spi_lookup *lookup = data;
@@ -2364,14 +2368,35 @@ static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
sb = &ares->data.spi_serial_bus;
if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_SPI) {
+ if (lookup->index != -1 && lookup->n++ != lookup->index)
+ return 1;
+
+ if (lookup->index == -1 && !ctlr)
+ return -ENODEV;
+
status = acpi_get_handle(NULL,
sb->resource_source.string_ptr,
&parent_handle);
- if (ACPI_FAILURE(status) ||
- ACPI_HANDLE(ctlr->dev.parent) != parent_handle)
+ if (ACPI_FAILURE(status))
return -ENODEV;
+ if (ctlr) {
+ if (ACPI_HANDLE(ctlr->dev.parent) != parent_handle)
+ return -ENODEV;
+ } else {
+ struct acpi_device *adev;
+
+ if (acpi_bus_get_device(parent_handle, &adev))
+ return -ENODEV;
+
+ ctlr = acpi_spi_find_controller_by_adev(adev);
+ if (!ctlr)
+ return -ENODEV;
+
+ lookup->ctlr = ctlr;
+ }
+
/*
* ACPI DeviceSelection numbering is handled by the
* host controller driver in Windows and can vary
@@ -2414,14 +2439,21 @@ static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
* acpi_spi_device_alloc - Allocate a spi device, and fill it in with ACPI information
* @ctlr: controller to which the spi device belongs
* @adev: ACPI Device for the spi device
+ * @index: Index of the spi resource inside the ACPI Node
*
* This should be used to allocate a new spi device from and ACPI Node.
* The caller is responsible for calling spi_add_device to register the spi device.
*
+ * If ctlr is set to NULL, the Controller for the spi device will be looked up
+ * using the resource.
+ * If index is set to -1, index is not used.
+ * Note: If index is -1, ctlr must be set.
+ *
* Return: a pointer to the new device, or ERR_PTR on error.
*/
struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
- struct acpi_device *adev)
+ struct acpi_device *adev,
+ int index)
{
acpi_handle parent_handle = NULL;
struct list_head resource_list;
@@ -2429,8 +2461,13 @@ struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
struct spi_device *spi;
int ret;
+ if (!ctlr && index == -1)
+ return ERR_PTR(-EINVAL);
+
lookup.ctlr = ctlr;
lookup.irq = -1;
+ lookup.index = index;
+ lookup.n = 0;
INIT_LIST_HEAD(&resource_list);
ret = acpi_dev_get_resources(adev, &resource_list,
@@ -2443,7 +2480,7 @@ struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
if (!lookup.max_speed_hz &&
ACPI_SUCCESS(acpi_get_parent(adev->handle, &parent_handle)) &&
- ACPI_HANDLE(ctlr->dev.parent) == parent_handle) {
+ ACPI_HANDLE(lookup.ctlr->dev.parent) == parent_handle) {
/* Apple does not use _CRS but nested devices for SPI slaves */
acpi_spi_parse_apple_properties(adev, &lookup);
}
@@ -2451,9 +2488,9 @@ struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
if (!lookup.max_speed_hz)
return ERR_PTR(-ENODEV);
- spi = spi_alloc_device(ctlr);
+ spi = spi_alloc_device(lookup.ctlr);
if (!spi) {
- dev_err(&ctlr->dev, "failed to allocate SPI device for %s\n",
+ dev_err(&lookup.ctlr->dev, "failed to allocate SPI device for %s\n",
dev_name(&adev->dev));
return ERR_PTR(-ENOMEM);
}
@@ -2478,7 +2515,7 @@ static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
acpi_device_enumerated(adev))
return AE_OK;
- spi = acpi_spi_device_alloc(ctlr, adev);
+ spi = acpi_spi_device_alloc(ctlr, adev, -1);
if (IS_ERR(spi)) {
if (PTR_ERR(spi) == -ENOMEM)
return AE_NO_MEMORY;
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index d159cef12f1a..e5bbb9cbd3d7 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -762,7 +762,8 @@ extern void spi_unregister_controller(struct spi_controller *ctlr);
#if IS_ENABLED(CONFIG_ACPI)
extern struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
- struct acpi_device *adev);
+ struct acpi_device *adev,
+ int index);
#endif
/*
--
2.25.1
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v5 4/9] spi: Add API to count spi acpi resources
2022-01-21 14:32 [PATCH v5 0/9] Support Spi in i2c-multi-instantiate driver Stefan Binding
` (2 preceding siblings ...)
2022-01-21 14:32 ` [PATCH v5 3/9] spi: Support selection of the index of the ACPI Spi Resource before alloc Stefan Binding
@ 2022-01-21 14:32 ` Stefan Binding
2022-01-21 14:32 ` [PATCH v5 5/9] platform/x86: i2c-multi-instantiate: Rename it for a generic serial driver name Stefan Binding
` (4 subsequent siblings)
8 siblings, 0 replies; 18+ messages in thread
From: Stefan Binding @ 2022-01-21 14:32 UTC (permalink / raw)
To: Mark Brown, Rafael J . Wysocki, Len Brown, Hans de Goede,
Mark Gross, Jaroslav Kysela, Takashi Iwai
Cc: alsa-devel, linux-kernel, linux-spi, linux-acpi,
platform-driver-x86, patches, Stefan Binding
Some ACPI nodes may have more than one Spi Resource.
To be able to handle these case, its necessary to have
a way of counting these resources.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
---
drivers/spi/spi.c | 40 ++++++++++++++++++++++++++++++++++++++++
include/linux/spi/spi.h | 1 +
2 files changed, 41 insertions(+)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 06c0a308b38b..ec9f2ed579e3 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -2324,6 +2324,46 @@ struct acpi_spi_lookup {
int index;
};
+static int acpi_spi_count(struct acpi_resource *ares, void *data)
+{
+ struct acpi_resource_spi_serialbus *sb;
+ int *count = data;
+
+ if (ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
+ return 1;
+
+ sb = &ares->data.spi_serial_bus;
+ if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_SPI)
+ return 1;
+
+ *count = *count + 1;
+
+ return 1;
+}
+
+/**
+ * acpi_spi_count_resources - Count the number of SpiSerialBus resources
+ * @adev: ACPI device
+ *
+ * Returns the number of SpiSerialBus resources in the ACPI-device's
+ * resource-list; or a negative error code.
+ */
+int acpi_spi_count_resources(struct acpi_device *adev)
+{
+ LIST_HEAD(r);
+ int count = 0;
+ int ret;
+
+ ret = acpi_dev_get_resources(adev, &r, acpi_spi_count, &count);
+ if (ret < 0)
+ return ret;
+
+ acpi_dev_free_resource_list(&r);
+
+ return count;
+}
+EXPORT_SYMBOL_GPL(acpi_spi_count_resources);
+
static void acpi_spi_parse_apple_properties(struct acpi_device *dev,
struct acpi_spi_lookup *lookup)
{
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index e5bbb9cbd3d7..394b4241d989 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -764,6 +764,7 @@ extern void spi_unregister_controller(struct spi_controller *ctlr);
extern struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
struct acpi_device *adev,
int index);
+int acpi_spi_count_resources(struct acpi_device *adev);
#endif
/*
--
2.25.1
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v5 5/9] platform/x86: i2c-multi-instantiate: Rename it for a generic serial driver name
2022-01-21 14:32 [PATCH v5 0/9] Support Spi in i2c-multi-instantiate driver Stefan Binding
` (3 preceding siblings ...)
2022-01-21 14:32 ` [PATCH v5 4/9] spi: Add API to count spi acpi resources Stefan Binding
@ 2022-01-21 14:32 ` Stefan Binding
2022-01-21 15:12 ` Rafael J. Wysocki
2022-01-21 14:32 ` [PATCH v5 6/9] platform/x86: serial-multi-instantiate: Reorganize I2C functions Stefan Binding
` (3 subsequent siblings)
8 siblings, 1 reply; 18+ messages in thread
From: Stefan Binding @ 2022-01-21 14:32 UTC (permalink / raw)
To: Mark Brown, Rafael J . Wysocki, Len Brown, Hans de Goede,
Mark Gross, Jaroslav Kysela, Takashi Iwai
Cc: alsa-devel, linux-kernel, linux-spi, linux-acpi,
platform-driver-x86, patches, Lucas Tanure, Stefan Binding
From: Lucas Tanure <tanureal@opensource.cirrus.com>
Rename I2C multi instantiate driver to serial-multi-instantiate for
upcoming addition of SPI support
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
---
MAINTAINERS | 4 +-
drivers/acpi/scan.c | 2 +-
drivers/platform/x86/Kconfig | 4 +-
drivers/platform/x86/Makefile | 2 +-
...stantiate.c => serial-multi-instantiate.c} | 89 +++++++++----------
5 files changed, 50 insertions(+), 51 deletions(-)
rename drivers/platform/x86/{i2c-multi-instantiate.c => serial-multi-instantiate.c} (52%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 4e828542b089..be50537ea6bd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -388,11 +388,11 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: drivers/acpi/arm64
-ACPI I2C MULTI INSTANTIATE DRIVER
+ACPI SERIAL MULTI INSTANTIATE DRIVER
M: Hans de Goede <hdegoede@redhat.com>
L: platform-driver-x86@vger.kernel.org
S: Maintained
-F: drivers/platform/x86/i2c-multi-instantiate.c
+F: drivers/platform/x86/serial-multi-instantiate.c
ACPI PCC(Platform Communication Channel) MAILBOX DRIVER
M: Sudeep Holla <sudeep.holla@arm.com>
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 1331756d4cfc..8b237eb4e029 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1738,7 +1738,7 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
* must be instantiated for each, each with its own i2c_device_id.
* Normally we only instantiate an i2c-client for the first resource,
* using the ACPI HID as id. These special cases are handled by the
- * drivers/platform/x86/i2c-multi-instantiate.c driver, which knows
+ * drivers/platform/x86/serial-multi-instantiate.c driver, which knows
* which i2c_device_id to use for each resource.
*/
{"BSG1160", },
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 24deeeb29af2..5b65d687f046 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -990,7 +990,7 @@ config TOPSTAR_LAPTOP
If you have a Topstar laptop, say Y or M here.
-config I2C_MULTI_INSTANTIATE
+config SERIAL_MULTI_INSTANTIATE
tristate "I2C multi instantiate pseudo device driver"
depends on I2C && ACPI
help
@@ -999,7 +999,7 @@ config I2C_MULTI_INSTANTIATE
for each device in the firmware-node.
To compile this driver as a module, choose M here: the module
- will be called i2c-multi-instantiate.
+ will be called serial-multi-instantiate.
config MLX_PLATFORM
tristate "Mellanox Technologies platform support"
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index c12a9b044fd8..9527088bba7f 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -110,7 +110,7 @@ obj-$(CONFIG_TOPSTAR_LAPTOP) += topstar-laptop.o
# Platform drivers
obj-$(CONFIG_FW_ATTR_CLASS) += firmware_attributes_class.o
-obj-$(CONFIG_I2C_MULTI_INSTANTIATE) += i2c-multi-instantiate.o
+obj-$(CONFIG_SERIAL_MULTI_INSTANTIATE) += serial-multi-instantiate.o
obj-$(CONFIG_MLX_PLATFORM) += mlx-platform.o
obj-$(CONFIG_TOUCHSCREEN_DMI) += touchscreen_dmi.o
obj-$(CONFIG_WIRELESS_HOTKEY) += wireless-hotkey.o
diff --git a/drivers/platform/x86/i2c-multi-instantiate.c b/drivers/platform/x86/serial-multi-instantiate.c
similarity index 52%
rename from drivers/platform/x86/i2c-multi-instantiate.c
rename to drivers/platform/x86/serial-multi-instantiate.c
index 4956a1df5b90..32fb3f904547 100644
--- a/drivers/platform/x86/i2c-multi-instantiate.c
+++ b/drivers/platform/x86/serial-multi-instantiate.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * I2C multi-instantiate driver, pseudo driver to instantiate multiple
+ * Serial multi-instantiate driver, pseudo driver to instantiate multiple
* i2c-clients from a single fwnode.
*
* Copyright 2018 Hans de Goede <hdegoede@redhat.com>
@@ -21,29 +21,29 @@
#define IRQ_RESOURCE_GPIO 1
#define IRQ_RESOURCE_APIC 2
-struct i2c_inst_data {
+struct smi_instance {
const char *type;
unsigned int flags;
int irq_idx;
};
-struct i2c_multi_inst_data {
- int num_clients;
- struct i2c_client *clients[];
+struct smi {
+ int i2c_num;
+ struct i2c_client *i2c_devs[];
};
-static int i2c_multi_inst_probe(struct platform_device *pdev)
+static int smi_probe(struct platform_device *pdev)
{
- struct i2c_multi_inst_data *multi;
- const struct i2c_inst_data *inst_data;
struct i2c_board_info board_info = {};
+ const struct smi_instance *inst;
struct device *dev = &pdev->dev;
struct acpi_device *adev;
+ struct smi *smi;
char name[32];
int i, ret;
- inst_data = device_get_match_data(dev);
- if (!inst_data) {
+ inst = device_get_match_data(dev);
+ if (!inst) {
dev_err(dev, "Error ACPI match data is missing\n");
return -ENODEV;
}
@@ -55,33 +55,32 @@ static int i2c_multi_inst_probe(struct platform_device *pdev)
if (ret < 0)
return ret;
- multi = devm_kmalloc(dev, struct_size(multi, clients, ret), GFP_KERNEL);
- if (!multi)
+ smi = devm_kmalloc(dev, struct_size(smi, i2c_devs, ret), GFP_KERNEL);
+ if (!smi)
return -ENOMEM;
- multi->num_clients = ret;
+ smi->i2c_num = ret;
- for (i = 0; i < multi->num_clients && inst_data[i].type; i++) {
+ for (i = 0; i < smi->i2c_num && inst[i].type; i++) {
memset(&board_info, 0, sizeof(board_info));
- strlcpy(board_info.type, inst_data[i].type, I2C_NAME_SIZE);
- snprintf(name, sizeof(name), "%s-%s.%d", dev_name(dev),
- inst_data[i].type, i);
+ strlcpy(board_info.type, inst[i].type, I2C_NAME_SIZE);
+ snprintf(name, sizeof(name), "%s-%s.%d", dev_name(dev), inst[i].type, i);
board_info.dev_name = name;
- switch (inst_data[i].flags & IRQ_RESOURCE_TYPE) {
+ switch (inst[i].flags & IRQ_RESOURCE_TYPE) {
case IRQ_RESOURCE_GPIO:
- ret = acpi_dev_gpio_irq_get(adev, inst_data[i].irq_idx);
+ ret = acpi_dev_gpio_irq_get(adev, inst[i].irq_idx);
if (ret < 0) {
dev_err(dev, "Error requesting irq at index %d: %d\n",
- inst_data[i].irq_idx, ret);
+ inst[i].irq_idx, ret);
goto error;
}
board_info.irq = ret;
break;
case IRQ_RESOURCE_APIC:
- ret = platform_get_irq(pdev, inst_data[i].irq_idx);
+ ret = platform_get_irq(pdev, inst[i].irq_idx);
if (ret < 0) {
dev_dbg(dev, "Error requesting irq at index %d: %d\n",
- inst_data[i].irq_idx, ret);
+ inst[i].irq_idx, ret);
goto error;
}
board_info.irq = ret;
@@ -90,48 +89,48 @@ static int i2c_multi_inst_probe(struct platform_device *pdev)
board_info.irq = 0;
break;
}
- multi->clients[i] = i2c_acpi_new_device(dev, i, &board_info);
- if (IS_ERR(multi->clients[i])) {
- ret = dev_err_probe(dev, PTR_ERR(multi->clients[i]),
+ smi->i2c_devs[i] = i2c_acpi_new_device(dev, i, &board_info);
+ if (IS_ERR(smi->i2c_devs[i])) {
+ ret = dev_err_probe(dev, PTR_ERR(smi->i2c_devs[i]),
"Error creating i2c-client, idx %d\n", i);
goto error;
}
}
- if (i < multi->num_clients) {
+ if (i < smi->i2c_num) {
dev_err(dev, "Error finding driver, idx %d\n", i);
ret = -ENODEV;
goto error;
}
- platform_set_drvdata(pdev, multi);
+ platform_set_drvdata(pdev, smi);
return 0;
error:
while (--i >= 0)
- i2c_unregister_device(multi->clients[i]);
+ i2c_unregister_device(smi->i2c_devs[i]);
return ret;
}
-static int i2c_multi_inst_remove(struct platform_device *pdev)
+static int smi_remove(struct platform_device *pdev)
{
- struct i2c_multi_inst_data *multi = platform_get_drvdata(pdev);
+ struct smi *smi = platform_get_drvdata(pdev);
int i;
- for (i = 0; i < multi->num_clients; i++)
- i2c_unregister_device(multi->clients[i]);
+ for (i = 0; i < smi->i2c_num; i++)
+ i2c_unregister_device(smi->i2c_devs[i]);
return 0;
}
-static const struct i2c_inst_data bsg1160_data[] = {
+static const struct smi_instance bsg1160_data[] = {
{ "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
{ "bmc150_magn" },
{ "bmg160" },
{}
};
-static const struct i2c_inst_data bsg2150_data[] = {
+static const struct smi_instance bsg2150_data[] = {
{ "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
{ "bmc150_magn" },
/* The resources describe a 3th client, but it is not really there. */
@@ -139,7 +138,7 @@ static const struct i2c_inst_data bsg2150_data[] = {
{}
};
-static const struct i2c_inst_data int3515_data[] = {
+static const struct smi_instance int3515_data[] = {
{ "tps6598x", IRQ_RESOURCE_APIC, 0 },
{ "tps6598x", IRQ_RESOURCE_APIC, 1 },
{ "tps6598x", IRQ_RESOURCE_APIC, 2 },
@@ -148,27 +147,27 @@ static const struct i2c_inst_data int3515_data[] = {
};
/*
- * Note new device-ids must also be added to i2c_multi_instantiate_ids in
+ * Note new device-ids must also be added to serial_multi_instantiate_ids in
* drivers/acpi/scan.c: acpi_device_enumeration_by_parent().
*/
-static const struct acpi_device_id i2c_multi_inst_acpi_ids[] = {
+static const struct acpi_device_id smi_acpi_ids[] = {
{ "BSG1160", (unsigned long)bsg1160_data },
{ "BSG2150", (unsigned long)bsg2150_data },
{ "INT3515", (unsigned long)int3515_data },
{ }
};
-MODULE_DEVICE_TABLE(acpi, i2c_multi_inst_acpi_ids);
+MODULE_DEVICE_TABLE(acpi, smi_acpi_ids);
-static struct platform_driver i2c_multi_inst_driver = {
+static struct platform_driver smi_driver = {
.driver = {
- .name = "I2C multi instantiate pseudo device driver",
- .acpi_match_table = i2c_multi_inst_acpi_ids,
+ .name = "Serial multi instantiate pseudo device driver",
+ .acpi_match_table = smi_acpi_ids,
},
- .probe = i2c_multi_inst_probe,
- .remove = i2c_multi_inst_remove,
+ .probe = smi_probe,
+ .remove = smi_remove,
};
-module_platform_driver(i2c_multi_inst_driver);
+module_platform_driver(smi_driver);
-MODULE_DESCRIPTION("I2C multi instantiate pseudo device driver");
+MODULE_DESCRIPTION("Serial multi instantiate pseudo device driver");
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
MODULE_LICENSE("GPL");
--
2.25.1
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v5 6/9] platform/x86: serial-multi-instantiate: Reorganize I2C functions
2022-01-21 14:32 [PATCH v5 0/9] Support Spi in i2c-multi-instantiate driver Stefan Binding
` (4 preceding siblings ...)
2022-01-21 14:32 ` [PATCH v5 5/9] platform/x86: i2c-multi-instantiate: Rename it for a generic serial driver name Stefan Binding
@ 2022-01-21 14:32 ` Stefan Binding
2022-01-21 15:27 ` Rafael J. Wysocki
2022-01-21 14:32 ` [PATCH v5 7/9] platform/x86: serial-multi-instantiate: Add SPI support Stefan Binding
` (2 subsequent siblings)
8 siblings, 1 reply; 18+ messages in thread
From: Stefan Binding @ 2022-01-21 14:32 UTC (permalink / raw)
To: Mark Brown, Rafael J . Wysocki, Len Brown, Hans de Goede,
Mark Gross, Jaroslav Kysela, Takashi Iwai
Cc: alsa-devel, linux-kernel, linux-spi, linux-acpi,
platform-driver-x86, patches, Lucas Tanure, Stefan Binding
From: Lucas Tanure <tanureal@opensource.cirrus.com>
Reorganize I2C functions to accommodate SPI support
Split the probe and factor out parts of the code
that will be used in the SPI support
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
---
.../platform/x86/serial-multi-instantiate.c | 145 +++++++++++-------
1 file changed, 90 insertions(+), 55 deletions(-)
diff --git a/drivers/platform/x86/serial-multi-instantiate.c b/drivers/platform/x86/serial-multi-instantiate.c
index 32fb3f904547..162ec20a861a 100644
--- a/drivers/platform/x86/serial-multi-instantiate.c
+++ b/drivers/platform/x86/serial-multi-instantiate.c
@@ -29,96 +29,131 @@ struct smi_instance {
struct smi {
int i2c_num;
- struct i2c_client *i2c_devs[];
+ struct i2c_client **i2c_devs;
};
-static int smi_probe(struct platform_device *pdev)
+static int smi_get_irq(struct platform_device *pdev, struct acpi_device *adev,
+ const struct smi_instance *inst)
+{
+ int ret;
+
+ switch (inst->flags & IRQ_RESOURCE_TYPE) {
+ case IRQ_RESOURCE_GPIO:
+ ret = acpi_dev_gpio_irq_get(adev, inst->irq_idx);
+ break;
+ case IRQ_RESOURCE_APIC:
+ ret = platform_get_irq(pdev, inst->irq_idx);
+ break;
+ default:
+ ret = 0;
+ break;
+ }
+
+ if (ret < 0)
+ dev_err_probe(&pdev->dev, ret, "Error requesting irq at index %d: %d\n",
+ inst->irq_idx, ret);
+
+ return ret;
+}
+
+static void smi_devs_unregister(struct smi *smi)
+{
+ while (smi->i2c_num > 0)
+ i2c_unregister_device(smi->i2c_devs[--smi->i2c_num]);
+}
+
+/**
+ * smi_i2c_probe - Instantiate multiple I2C devices from inst array
+ * @pdev: Platform device
+ * @adev: ACPI device
+ * @smi: Internal struct for Serial multi instantiate driver
+ * @inst: Array of instances to probe
+ *
+ * Returns the number of I2C devices instantiate, Zero if none is found or a negative error code.
+ */
+static int smi_i2c_probe(struct platform_device *pdev, struct acpi_device *adev, struct smi *smi,
+ const struct smi_instance *inst_array)
{
struct i2c_board_info board_info = {};
- const struct smi_instance *inst;
struct device *dev = &pdev->dev;
- struct acpi_device *adev;
- struct smi *smi;
char name[32];
- int i, ret;
+ int i, ret, count;
- inst = device_get_match_data(dev);
- if (!inst) {
- dev_err(dev, "Error ACPI match data is missing\n");
- return -ENODEV;
- }
-
- adev = ACPI_COMPANION(dev);
-
- /* Count number of clients to instantiate */
ret = i2c_acpi_client_count(adev);
- if (ret < 0)
- return ret;
+ if (ret <= 0)
+ return ret == 0 ? -ENODEV : ret;
- smi = devm_kmalloc(dev, struct_size(smi, i2c_devs, ret), GFP_KERNEL);
- if (!smi)
- return -ENOMEM;
+ count = ret;
- smi->i2c_num = ret;
+ smi->i2c_devs = devm_kcalloc(dev, count, sizeof(*smi->i2c_devs), GFP_KERNEL);
+ if (!smi->i2c_devs)
+ return -ENOMEM;
- for (i = 0; i < smi->i2c_num && inst[i].type; i++) {
+ for (i = 0; i < count && inst_array[i].type; i++) {
memset(&board_info, 0, sizeof(board_info));
- strlcpy(board_info.type, inst[i].type, I2C_NAME_SIZE);
- snprintf(name, sizeof(name), "%s-%s.%d", dev_name(dev), inst[i].type, i);
+ strscpy(board_info.type, inst_array[i].type, I2C_NAME_SIZE);
+ snprintf(name, sizeof(name), "%s-%s.%d", dev_name(dev), inst_array[i].type, i);
board_info.dev_name = name;
- switch (inst[i].flags & IRQ_RESOURCE_TYPE) {
- case IRQ_RESOURCE_GPIO:
- ret = acpi_dev_gpio_irq_get(adev, inst[i].irq_idx);
- if (ret < 0) {
- dev_err(dev, "Error requesting irq at index %d: %d\n",
- inst[i].irq_idx, ret);
- goto error;
- }
- board_info.irq = ret;
- break;
- case IRQ_RESOURCE_APIC:
- ret = platform_get_irq(pdev, inst[i].irq_idx);
- if (ret < 0) {
- dev_dbg(dev, "Error requesting irq at index %d: %d\n",
- inst[i].irq_idx, ret);
- goto error;
- }
- board_info.irq = ret;
- break;
- default:
- board_info.irq = 0;
- break;
- }
+
+ ret = smi_get_irq(pdev, adev, &inst_array[i]);
+ if (ret < 0)
+ goto error;
+ board_info.irq = ret;
+
smi->i2c_devs[i] = i2c_acpi_new_device(dev, i, &board_info);
if (IS_ERR(smi->i2c_devs[i])) {
ret = dev_err_probe(dev, PTR_ERR(smi->i2c_devs[i]),
"Error creating i2c-client, idx %d\n", i);
goto error;
}
+ smi->i2c_num++;
}
- if (i < smi->i2c_num) {
+ if (smi->i2c_num < count) {
dev_err(dev, "Error finding driver, idx %d\n", i);
ret = -ENODEV;
goto error;
}
- platform_set_drvdata(pdev, smi);
- return 0;
+ dev_info(dev, "Instantiated %d I2C devices.\n", smi->i2c_num);
+ return 0;
error:
- while (--i >= 0)
- i2c_unregister_device(smi->i2c_devs[i]);
+ smi_devs_unregister(smi);
return ret;
}
+static int smi_probe(struct platform_device *pdev)
+{
+ const struct smi_instance *inst_array;
+ struct device *dev = &pdev->dev;
+ struct acpi_device *adev;
+ struct smi *smi;
+
+ inst_array = device_get_match_data(dev);
+ if (!inst_array) {
+ dev_err(dev, "Error ACPI match data is missing\n");
+ return -ENODEV;
+ }
+
+ adev = ACPI_COMPANION(dev);
+ if (!adev)
+ return -ENODEV;
+
+ smi = devm_kzalloc(dev, sizeof(*smi), GFP_KERNEL);
+ if (!smi)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, smi);
+
+ return smi_i2c_probe(pdev, adev, smi, inst_array);
+}
+
static int smi_remove(struct platform_device *pdev)
{
struct smi *smi = platform_get_drvdata(pdev);
- int i;
- for (i = 0; i < smi->i2c_num; i++)
- i2c_unregister_device(smi->i2c_devs[i]);
+ smi_devs_unregister(smi);
return 0;
}
--
2.25.1
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v5 7/9] platform/x86: serial-multi-instantiate: Add SPI support
2022-01-21 14:32 [PATCH v5 0/9] Support Spi in i2c-multi-instantiate driver Stefan Binding
` (5 preceding siblings ...)
2022-01-21 14:32 ` [PATCH v5 6/9] platform/x86: serial-multi-instantiate: Reorganize I2C functions Stefan Binding
@ 2022-01-21 14:32 ` Stefan Binding
2022-01-21 15:31 ` Rafael J. Wysocki
2022-01-21 14:32 ` [PATCH v5 8/9] ALSA: hda/realtek: Add support for HP Laptops Stefan Binding
2022-01-21 14:32 ` [PATCH v5 9/9] ACPI / scan: Create platform device for CS35L41 Stefan Binding
8 siblings, 1 reply; 18+ messages in thread
From: Stefan Binding @ 2022-01-21 14:32 UTC (permalink / raw)
To: Mark Brown, Rafael J . Wysocki, Len Brown, Hans de Goede,
Mark Gross, Jaroslav Kysela, Takashi Iwai
Cc: alsa-devel, linux-kernel, linux-spi, linux-acpi,
platform-driver-x86, patches, Stefan Binding
Add support for spi bus in serial-multi-instantiate driver
Some peripherals can have either a I2C or a SPI connection
to the host (but not both) but use the same HID for both
types. So it is not possible to use the HID to determine
whether it is I2C or SPI. The driver must check the node
to see if it contains I2cSerialBus or SpiSerialBus entries.
For backwards-compatibility with the existing nodes I2C is
checked first and if such entries are found ONLY I2C devices
are created. Since some existing nodes that were already
handled by this driver could also contain unrelated
SpiSerialBus nodes that were previously ignored, and this
preserves that behavior. If there is ever a need to handle
a node where both I2C and SPI devices must be instantiated
this can be added in future.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
---
drivers/acpi/scan.c | 13 +-
drivers/platform/x86/Kconfig | 10 +-
.../platform/x86/serial-multi-instantiate.c | 174 +++++++++++++++---
3 files changed, 161 insertions(+), 36 deletions(-)
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 8b237eb4e029..38c4f55960f4 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1734,12 +1734,13 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
bool is_serial_bus_slave = false;
static const struct acpi_device_id ignore_serial_bus_ids[] = {
/*
- * These devices have multiple I2cSerialBus resources and an i2c-client
- * must be instantiated for each, each with its own i2c_device_id.
- * Normally we only instantiate an i2c-client for the first resource,
- * using the ACPI HID as id. These special cases are handled by the
- * drivers/platform/x86/serial-multi-instantiate.c driver, which knows
- * which i2c_device_id to use for each resource.
+ * These devices have multiple I2cSerialBus/SpiSerialBus resources
+ * and an (i2c/spi)-client must be instantiated for each, each with
+ * its own i2c_device_id/spi_device_id.
+ * Normally we only instantiate an (i2c/spi)-client for the first
+ * resource, using the ACPI HID as id. These special cases are handled
+ * by the drivers/platform/x86/serial-multi-instantiate.c driver, which
+ * knows which i2c_device_id or spi_device_id to use for each resource.
*/
{"BSG1160", },
{"BSG2150", },
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 5b65d687f046..28f5bbf0f27a 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -991,12 +991,12 @@ config TOPSTAR_LAPTOP
If you have a Topstar laptop, say Y or M here.
config SERIAL_MULTI_INSTANTIATE
- tristate "I2C multi instantiate pseudo device driver"
- depends on I2C && ACPI
+ tristate "I2C and SPI multi instantiate pseudo device driver"
+ depends on I2C && SPI && ACPI
help
- Some ACPI-based systems list multiple i2c-devices in a single ACPI
- firmware-node. This driver will instantiate separate i2c-clients
- for each device in the firmware-node.
+ Some ACPI-based systems list multiple i2c/spi devices in a
+ single ACPI firmware-node. This driver will instantiate separate
+ i2c-clients or spi-devices for each device in the firmware-node.
To compile this driver as a module, choose M here: the module
will be called serial-multi-instantiate.
diff --git a/drivers/platform/x86/serial-multi-instantiate.c b/drivers/platform/x86/serial-multi-instantiate.c
index 162ec20a861a..535c80789852 100644
--- a/drivers/platform/x86/serial-multi-instantiate.c
+++ b/drivers/platform/x86/serial-multi-instantiate.c
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Serial multi-instantiate driver, pseudo driver to instantiate multiple
- * i2c-clients from a single fwnode.
+ * i2c-clients or spi-devices from a single fwnode.
*
* Copyright 2018 Hans de Goede <hdegoede@redhat.com>
*/
@@ -14,6 +14,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/property.h>
+#include <linux/spi/spi.h>
#include <linux/types.h>
#define IRQ_RESOURCE_TYPE GENMASK(1, 0)
@@ -21,15 +22,28 @@
#define IRQ_RESOURCE_GPIO 1
#define IRQ_RESOURCE_APIC 2
+enum smi_bus_type {
+ SMI_I2C,
+ SMI_SPI,
+ SMI_AUTO_DETECT,
+};
+
struct smi_instance {
const char *type;
unsigned int flags;
int irq_idx;
};
+struct smi_node {
+ enum smi_bus_type bus_type;
+ struct smi_instance instances[];
+};
+
struct smi {
int i2c_num;
+ int spi_num;
struct i2c_client **i2c_devs;
+ struct spi_device **spi_devs;
};
static int smi_get_irq(struct platform_device *pdev, struct acpi_device *adev,
@@ -60,6 +74,93 @@ static void smi_devs_unregister(struct smi *smi)
{
while (smi->i2c_num > 0)
i2c_unregister_device(smi->i2c_devs[--smi->i2c_num]);
+
+ while (smi->spi_num > 0)
+ spi_unregister_device(smi->spi_devs[--smi->spi_num]);
+}
+
+/**
+ * smi_spi_probe - Instantiate multiple SPI devices from inst array
+ * @pdev: Platform device
+ * @adev: ACPI device
+ * @smi: Internal struct for Serial multi instantiate driver
+ * @inst: Array of instances to probe
+ *
+ * Returns the number of SPI devices instantiate, Zero if none is found or a negative error code.
+ */
+static int smi_spi_probe(struct platform_device *pdev, struct acpi_device *adev, struct smi *smi,
+ const struct smi_instance *inst_array)
+{
+ struct device *dev = &pdev->dev;
+ struct spi_controller *ctlr;
+ struct spi_device *spi_dev;
+ char name[50];
+ int i, ret, count;
+
+ ret = acpi_spi_count_resources(adev);
+ if (ret <= 0)
+ return ret == 0 ? -ENODEV : ret;
+
+ count = ret;
+
+ smi->spi_devs = devm_kcalloc(dev, count, sizeof(*smi->spi_devs), GFP_KERNEL);
+ if (!smi->spi_devs)
+ return -ENOMEM;
+
+ for (i = 0; i < count && inst_array[i].type; i++) {
+
+ spi_dev = acpi_spi_device_alloc(NULL, adev, i);
+ if (IS_ERR(spi_dev)) {
+ ret = PTR_ERR(spi_dev);
+ dev_err_probe(dev, ret, "failed to allocate SPI device %s from ACPI: %d\n",
+ dev_name(&adev->dev), ret);
+ goto error;
+ }
+
+ ctlr = spi_dev->controller;
+
+ strscpy(spi_dev->modalias, inst_array[i].type, sizeof(spi_dev->modalias));
+
+ ret = smi_get_irq(pdev, adev, &inst_array[i]);
+ if (ret < 0) {
+ spi_dev_put(spi_dev);
+ goto error;
+ }
+ spi_dev->irq = ret;
+
+ snprintf(name, sizeof(name), "%s-%s-%s.%d", dev_name(&ctlr->dev), dev_name(dev),
+ inst_array[i].type, i);
+ spi_dev->dev.init_name = name;
+
+ ret = spi_add_device(spi_dev);
+ if (ret) {
+ dev_err_probe(&ctlr->dev, ret,
+ "failed to add SPI device %s from ACPI: %d\n",
+ dev_name(&adev->dev), ret);
+ spi_dev_put(spi_dev);
+ goto error;
+ }
+
+ dev_dbg(dev, "SPI device %s using chip select %u", name, spi_dev->chip_select);
+
+ smi->spi_devs[i] = spi_dev;
+ smi->spi_num++;
+ }
+
+ if (smi->spi_num < count) {
+ dev_err(dev, "Error finding driver, idx %d\n", i);
+ ret = -ENODEV;
+ goto error;
+ }
+
+ dev_info(dev, "Instantiated %d SPI devices.\n", smi->spi_num);
+
+ return 0;
+error:
+ smi_devs_unregister(smi);
+
+ return ret;
+
}
/**
@@ -125,13 +226,13 @@ static int smi_i2c_probe(struct platform_device *pdev, struct acpi_device *adev,
static int smi_probe(struct platform_device *pdev)
{
- const struct smi_instance *inst_array;
struct device *dev = &pdev->dev;
+ const struct smi_node *node;
struct acpi_device *adev;
struct smi *smi;
- inst_array = device_get_match_data(dev);
- if (!inst_array) {
+ node = device_get_match_data(dev);
+ if (!node) {
dev_err(dev, "Error ACPI match data is missing\n");
return -ENODEV;
}
@@ -146,7 +247,21 @@ static int smi_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, smi);
- return smi_i2c_probe(pdev, adev, smi, inst_array);
+ switch (node->bus_type) {
+ case SMI_I2C:
+ return smi_i2c_probe(pdev, adev, smi, node->instances);
+ case SMI_SPI:
+ return smi_spi_probe(pdev, adev, smi, node->instances);
+ case SMI_AUTO_DETECT:
+ if (i2c_acpi_client_count(adev) > 0)
+ return smi_i2c_probe(pdev, adev, smi, node->instances);
+ else
+ return smi_spi_probe(pdev, adev, smi, node->instances);
+ default:
+ break;
+ }
+
+ return 0; /* never reached */
}
static int smi_remove(struct platform_device *pdev)
@@ -158,27 +273,36 @@ static int smi_remove(struct platform_device *pdev)
return 0;
}
-static const struct smi_instance bsg1160_data[] = {
- { "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
- { "bmc150_magn" },
- { "bmg160" },
- {}
+static const struct smi_node bsg1160_data = {
+ .instances = {
+ { "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
+ { "bmc150_magn" },
+ { "bmg160" },
+ {}
+ },
+ .bus_type = SMI_I2C,
};
-static const struct smi_instance bsg2150_data[] = {
- { "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
- { "bmc150_magn" },
- /* The resources describe a 3th client, but it is not really there. */
- { "bsg2150_dummy_dev" },
- {}
+static const struct smi_node bsg2150_data = {
+ .instances = {
+ { "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
+ { "bmc150_magn" },
+ /* The resources describe a 3th client, but it is not really there. */
+ { "bsg2150_dummy_dev" },
+ {}
+ },
+ .bus_type = SMI_I2C,
};
-static const struct smi_instance int3515_data[] = {
- { "tps6598x", IRQ_RESOURCE_APIC, 0 },
- { "tps6598x", IRQ_RESOURCE_APIC, 1 },
- { "tps6598x", IRQ_RESOURCE_APIC, 2 },
- { "tps6598x", IRQ_RESOURCE_APIC, 3 },
- {}
+static const struct smi_node int3515_data = {
+ .instances = {
+ { "tps6598x", IRQ_RESOURCE_APIC, 0 },
+ { "tps6598x", IRQ_RESOURCE_APIC, 1 },
+ { "tps6598x", IRQ_RESOURCE_APIC, 2 },
+ { "tps6598x", IRQ_RESOURCE_APIC, 3 },
+ {}
+ },
+ .bus_type = SMI_I2C,
};
/*
@@ -186,9 +310,9 @@ static const struct smi_instance int3515_data[] = {
* drivers/acpi/scan.c: acpi_device_enumeration_by_parent().
*/
static const struct acpi_device_id smi_acpi_ids[] = {
- { "BSG1160", (unsigned long)bsg1160_data },
- { "BSG2150", (unsigned long)bsg2150_data },
- { "INT3515", (unsigned long)int3515_data },
+ { "BSG1160", (unsigned long)&bsg1160_data },
+ { "BSG2150", (unsigned long)&bsg2150_data },
+ { "INT3515", (unsigned long)&int3515_data },
{ }
};
MODULE_DEVICE_TABLE(acpi, smi_acpi_ids);
--
2.25.1
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v5 8/9] ALSA: hda/realtek: Add support for HP Laptops
2022-01-21 14:32 [PATCH v5 0/9] Support Spi in i2c-multi-instantiate driver Stefan Binding
` (6 preceding siblings ...)
2022-01-21 14:32 ` [PATCH v5 7/9] platform/x86: serial-multi-instantiate: Add SPI support Stefan Binding
@ 2022-01-21 14:32 ` Stefan Binding
2022-01-21 14:44 ` Takashi Iwai
2022-01-21 14:32 ` [PATCH v5 9/9] ACPI / scan: Create platform device for CS35L41 Stefan Binding
8 siblings, 1 reply; 18+ messages in thread
From: Stefan Binding @ 2022-01-21 14:32 UTC (permalink / raw)
To: Mark Brown, Rafael J . Wysocki, Len Brown, Hans de Goede,
Mark Gross, Jaroslav Kysela, Takashi Iwai
Cc: alsa-devel, linux-kernel, linux-spi, linux-acpi,
platform-driver-x86, patches, Lucas Tanure, Stefan Binding
From: Lucas Tanure <tanureal@opensource.cirrus.com>
Add support for two and four CS35L41 using the component
binding method
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
---
sound/pci/hda/patch_realtek.c | 43 ++++++++++++++++++++++++++++++++++-
1 file changed, 42 insertions(+), 1 deletion(-)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 668274e52674..b4fde8f603b1 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6611,6 +6611,16 @@ static void cs35l41_fixup_i2c_two(struct hda_codec *cdc, const struct hda_fixup
cs35l41_generic_fixup(cdc, action, "i2c", "CSC3551", 2);
}
+static void cs35l41_fixup_spi_two(struct hda_codec *codec, const struct hda_fixup *fix, int action)
+{
+ cs35l41_generic_fixup(codec, action, "spi0", "CSC3551", 2);
+}
+
+static void cs35l41_fixup_spi_four(struct hda_codec *codec, const struct hda_fixup *fix, int action)
+{
+ cs35l41_generic_fixup(codec, action, "spi0", "CSC3551", 4);
+}
+
static void alc287_legion_16achg6_playback_hook(struct hda_pcm_stream *hinfo, struct hda_codec *cdc,
struct snd_pcm_substream *sub, int action)
{
@@ -6948,6 +6958,9 @@ enum {
ALC285_FIXUP_LEGION_Y9000X_AUTOMUTE,
ALC287_FIXUP_LEGION_16ACHG6,
ALC287_FIXUP_CS35L41_I2C_2,
+ ALC245_FIXUP_CS35L41_SPI_2,
+ ALC245_FIXUP_CS35L41_SPI_4,
+ ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED,
ALC285_FIXUP_HP_SPEAKERS_MICMUTE_LED,
};
@@ -8699,6 +8712,20 @@ static const struct hda_fixup alc269_fixups[] = {
.type = HDA_FIXUP_FUNC,
.v.func = cs35l41_fixup_i2c_two,
},
+ [ALC245_FIXUP_CS35L41_SPI_2] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = cs35l41_fixup_spi_two,
+ },
+ [ALC245_FIXUP_CS35L41_SPI_4] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = cs35l41_fixup_spi_four,
+ },
+ [ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc245_fixup_hp_gpio_led,
+ .chained = true,
+ .chain_id = ALC245_FIXUP_CS35L41_SPI_4,
+ },
[ALC285_FIXUP_HP_SPEAKERS_MICMUTE_LED] = {
.type = HDA_FIXUP_VERBS,
.v.verbs = (const struct hda_verb[]) {
@@ -8926,7 +8953,21 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x8896, "HP EliteBook 855 G8 Notebook PC", ALC285_FIXUP_HP_MUTE_LED),
SND_PCI_QUIRK(0x103c, 0x8898, "HP EliteBook 845 G8 Notebook PC", ALC285_FIXUP_HP_LIMIT_INT_MIC_BOOST),
SND_PCI_QUIRK(0x103c, 0x88d0, "HP Pavilion 15-eh1xxx (mainboard 88D0)", ALC287_FIXUP_HP_GPIO_LED),
- SND_PCI_QUIRK(0x103c, 0x89c3, "HP", ALC285_FIXUP_HP_GPIO_LED),
+ SND_PCI_QUIRK(0x103c, 0x896E, "HP EliteBook x360 830 G9", ALC245_FIXUP_CS35L41_SPI_2),
+ SND_PCI_QUIRK(0x103c, 0x8971, "HP EliteBook 830 G9", ALC245_FIXUP_CS35L41_SPI_2),
+ SND_PCI_QUIRK(0x103c, 0x8972, "HP EliteBook 840 G9", ALC245_FIXUP_CS35L41_SPI_2),
+ SND_PCI_QUIRK(0x103c, 0x8973, "HP EliteBook 860 G9", ALC245_FIXUP_CS35L41_SPI_2),
+ SND_PCI_QUIRK(0x103c, 0x8974, "HP EliteBook 840 Aero G9", ALC245_FIXUP_CS35L41_SPI_2),
+ SND_PCI_QUIRK(0x103c, 0x8975, "HP EliteBook x360 840 Aero G9", ALC245_FIXUP_CS35L41_SPI_2),
+ SND_PCI_QUIRK(0x103c, 0x8981, "HP Elite Dragonfly G3", ALC245_FIXUP_CS35L41_SPI_4),
+ SND_PCI_QUIRK(0x103c, 0x898E, "HP EliteBook 835 G9", ALC287_FIXUP_CS35L41_I2C_2),
+ SND_PCI_QUIRK(0x103c, 0x898F, "HP EliteBook 835 G9", ALC287_FIXUP_CS35L41_I2C_2),
+ SND_PCI_QUIRK(0x103c, 0x8991, "HP EliteBook 845 G9", ALC287_FIXUP_CS35L41_I2C_2),
+ SND_PCI_QUIRK(0x103c, 0x8992, "HP EliteBook 845 G9", ALC287_FIXUP_CS35L41_I2C_2),
+ SND_PCI_QUIRK(0x103c, 0x8994, "HP EliteBook 855 G9", ALC287_FIXUP_CS35L41_I2C_2),
+ SND_PCI_QUIRK(0x103c, 0x8995, "HP EliteBook 855 G9", ALC287_FIXUP_CS35L41_I2C_2),
+ SND_PCI_QUIRK(0x103c, 0x89C3, "Zbook Studio G9", ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED),
+ SND_PCI_QUIRK(0x103c, 0x89C6, "Zbook Fury 17 G9", ALC245_FIXUP_CS35L41_SPI_2),
SND_PCI_QUIRK(0x103c, 0x89ca, "HP", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF),
SND_PCI_QUIRK(0x1043, 0x103e, "ASUS X540SA", ALC256_FIXUP_ASUS_MIC),
SND_PCI_QUIRK(0x1043, 0x103f, "ASUS TX300", ALC282_FIXUP_ASUS_TX300),
--
2.25.1
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v5 9/9] ACPI / scan: Create platform device for CS35L41
2022-01-21 14:32 [PATCH v5 0/9] Support Spi in i2c-multi-instantiate driver Stefan Binding
` (7 preceding siblings ...)
2022-01-21 14:32 ` [PATCH v5 8/9] ALSA: hda/realtek: Add support for HP Laptops Stefan Binding
@ 2022-01-21 14:32 ` Stefan Binding
2022-01-21 16:02 ` Rafael J. Wysocki
8 siblings, 1 reply; 18+ messages in thread
From: Stefan Binding @ 2022-01-21 14:32 UTC (permalink / raw)
To: Mark Brown, Rafael J . Wysocki, Len Brown, Hans de Goede,
Mark Gross, Jaroslav Kysela, Takashi Iwai
Cc: alsa-devel, linux-kernel, linux-spi, linux-acpi,
platform-driver-x86, patches, Lucas Tanure, Stefan Binding
From: Lucas Tanure <tanureal@opensource.cirrus.com>
The ACPI device with CSC3551 or CLSA0100 are sound cards
with multiple instances of CS35L41 connectec by I2C or SPI
to the main CPU.
We add an ID to the ignore_serial_bus_ids list to enumerate
all I2C or SPI devices correctly.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
---
drivers/acpi/scan.c | 3 +++
drivers/platform/x86/serial-multi-instantiate.c | 14 ++++++++++++++
2 files changed, 17 insertions(+)
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 38c4f55960f4..b59e4c994878 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1744,8 +1744,11 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
*/
{"BSG1160", },
{"BSG2150", },
+ {"CSC3551", },
{"INT33FE", },
{"INT3515", },
+ /* Non-conforming _HID for Cirrus Logic already released */
+ {"CLSA0100", },
/*
* HIDs of device with an UartSerialBusV2 resource for which userspace
* expects a regular tty cdev to be created (instead of the in kernel
diff --git a/drivers/platform/x86/serial-multi-instantiate.c b/drivers/platform/x86/serial-multi-instantiate.c
index 535c80789852..cef201065fdb 100644
--- a/drivers/platform/x86/serial-multi-instantiate.c
+++ b/drivers/platform/x86/serial-multi-instantiate.c
@@ -305,6 +305,17 @@ static const struct smi_node int3515_data = {
.bus_type = SMI_I2C,
};
+static const struct smi_node cs35l41_hda = {
+ .instances = {
+ { "cs35l41-hda", IRQ_RESOURCE_GPIO, 0 },
+ { "cs35l41-hda", IRQ_RESOURCE_GPIO, 0 },
+ { "cs35l41-hda", IRQ_RESOURCE_GPIO, 0 },
+ { "cs35l41-hda", IRQ_RESOURCE_GPIO, 0 },
+ {}
+ },
+ .bus_type = SMI_AUTO_DETECT,
+};
+
/*
* Note new device-ids must also be added to serial_multi_instantiate_ids in
* drivers/acpi/scan.c: acpi_device_enumeration_by_parent().
@@ -313,6 +324,9 @@ static const struct acpi_device_id smi_acpi_ids[] = {
{ "BSG1160", (unsigned long)&bsg1160_data },
{ "BSG2150", (unsigned long)&bsg2150_data },
{ "INT3515", (unsigned long)&int3515_data },
+ { "CSC3551", (unsigned long)&cs35l41_hda },
+ /* Non-conforming _HID for Cirrus Logic already released */
+ { "CLSA0100", (unsigned long)&cs35l41_hda },
{ }
};
MODULE_DEVICE_TABLE(acpi, smi_acpi_ids);
--
2.25.1
^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: [PATCH v5 8/9] ALSA: hda/realtek: Add support for HP Laptops
2022-01-21 14:32 ` [PATCH v5 8/9] ALSA: hda/realtek: Add support for HP Laptops Stefan Binding
@ 2022-01-21 14:44 ` Takashi Iwai
0 siblings, 0 replies; 18+ messages in thread
From: Takashi Iwai @ 2022-01-21 14:44 UTC (permalink / raw)
To: Stefan Binding
Cc: Mark Brown, Rafael J . Wysocki, Len Brown, Hans de Goede,
Mark Gross, Jaroslav Kysela, Takashi Iwai, alsa-devel,
linux-kernel, linux-spi, linux-acpi, platform-driver-x86,
patches, Lucas Tanure
On Fri, 21 Jan 2022 15:32:53 +0100,
Stefan Binding wrote:
>
> @@ -8926,7 +8953,21 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
> SND_PCI_QUIRK(0x103c, 0x8896, "HP EliteBook 855 G8 Notebook PC", ALC285_FIXUP_HP_MUTE_LED),
> SND_PCI_QUIRK(0x103c, 0x8898, "HP EliteBook 845 G8 Notebook PC", ALC285_FIXUP_HP_LIMIT_INT_MIC_BOOST),
> SND_PCI_QUIRK(0x103c, 0x88d0, "HP Pavilion 15-eh1xxx (mainboard 88D0)", ALC287_FIXUP_HP_GPIO_LED),
> - SND_PCI_QUIRK(0x103c, 0x89c3, "HP", ALC285_FIXUP_HP_GPIO_LED),
> + SND_PCI_QUIRK(0x103c, 0x896E, "HP EliteBook x360 830 G9", ALC245_FIXUP_CS35L41_SPI_2),
Please use lower letters for the hex number to align with others.
(Also other lines you've added.)
Though, it's no urgent problem, and we can fix it later if the whole
patch set can be merged now. If v3 needs to be respinned, please
apply the fix.
With the correction to be done,
Acked-by: Takashi Iwai <tiwai@suse.de>
thanks,
Takashi
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v5 5/9] platform/x86: i2c-multi-instantiate: Rename it for a generic serial driver name
2022-01-21 14:32 ` [PATCH v5 5/9] platform/x86: i2c-multi-instantiate: Rename it for a generic serial driver name Stefan Binding
@ 2022-01-21 15:12 ` Rafael J. Wysocki
0 siblings, 0 replies; 18+ messages in thread
From: Rafael J. Wysocki @ 2022-01-21 15:12 UTC (permalink / raw)
To: Stefan Binding
Cc: Mark Brown, Rafael J . Wysocki, Len Brown, Hans de Goede,
Mark Gross, Jaroslav Kysela, Takashi Iwai,
moderated list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEM...,
Linux Kernel Mailing List, linux-spi, ACPI Devel Maling List,
Platform Driver, patches, Lucas Tanure
On Fri, Jan 21, 2022 at 3:33 PM Stefan Binding
<sbinding@opensource.cirrus.com> wrote:
>
> From: Lucas Tanure <tanureal@opensource.cirrus.com>
>
> Rename I2C multi instantiate driver to serial-multi-instantiate for
> upcoming addition of SPI support
>
> Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
> Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
> ---
> MAINTAINERS | 4 +-
> drivers/acpi/scan.c | 2 +-
> drivers/platform/x86/Kconfig | 4 +-
> drivers/platform/x86/Makefile | 2 +-
> ...stantiate.c => serial-multi-instantiate.c} | 89 +++++++++----------
> 5 files changed, 50 insertions(+), 51 deletions(-)
> rename drivers/platform/x86/{i2c-multi-instantiate.c => serial-multi-instantiate.c} (52%)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 4e828542b089..be50537ea6bd 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -388,11 +388,11 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
> S: Maintained
> F: drivers/acpi/arm64
>
> -ACPI I2C MULTI INSTANTIATE DRIVER
> +ACPI SERIAL MULTI INSTANTIATE DRIVER
> M: Hans de Goede <hdegoede@redhat.com>
> L: platform-driver-x86@vger.kernel.org
> S: Maintained
> -F: drivers/platform/x86/i2c-multi-instantiate.c
> +F: drivers/platform/x86/serial-multi-instantiate.c
>
> ACPI PCC(Platform Communication Channel) MAILBOX DRIVER
> M: Sudeep Holla <sudeep.holla@arm.com>
> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> index 1331756d4cfc..8b237eb4e029 100644
> --- a/drivers/acpi/scan.c
> +++ b/drivers/acpi/scan.c
> @@ -1738,7 +1738,7 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
> * must be instantiated for each, each with its own i2c_device_id.
> * Normally we only instantiate an i2c-client for the first resource,
> * using the ACPI HID as id. These special cases are handled by the
> - * drivers/platform/x86/i2c-multi-instantiate.c driver, which knows
> + * drivers/platform/x86/serial-multi-instantiate.c driver, which knows
> * which i2c_device_id to use for each resource.
This entire comment needs to be updated as well as the Kconfig option
description and the comment in the driver file.
I have noticed that this is generalized when adding the SPI support,
but it can be done right away here, for example as follows:
+ * These devices have multiple SerialBus resources and a client
+ * device must be instantiated for each of them, each with
+ * its own device id.
+ * Normally we only instantiate one client device for the first
+ * resource, using the ACPI HID as id. These special cases are handled
+ * by the drivers/platform/x86/serial-multi-instantiate.c driver, which
+ * knows which client device id to use for each resource.
> */
> {"BSG1160", },
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 24deeeb29af2..5b65d687f046 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -990,7 +990,7 @@ config TOPSTAR_LAPTOP
>
> If you have a Topstar laptop, say Y or M here.
>
> -config I2C_MULTI_INSTANTIATE
> +config SERIAL_MULTI_INSTANTIATE
> tristate "I2C multi instantiate pseudo device driver"
So this would be "Serial bus multi instantiate pseudo device driver"
> depends on I2C && ACPI
> help
> @@ -999,7 +999,7 @@ config I2C_MULTI_INSTANTIATE
> for each device in the firmware-node.
>
> To compile this driver as a module, choose M here: the module
> - will be called i2c-multi-instantiate.
> + will be called serial-multi-instantiate.
>
> config MLX_PLATFORM
> tristate "Mellanox Technologies platform support"
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index c12a9b044fd8..9527088bba7f 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -110,7 +110,7 @@ obj-$(CONFIG_TOPSTAR_LAPTOP) += topstar-laptop.o
>
> # Platform drivers
> obj-$(CONFIG_FW_ATTR_CLASS) += firmware_attributes_class.o
> -obj-$(CONFIG_I2C_MULTI_INSTANTIATE) += i2c-multi-instantiate.o
> +obj-$(CONFIG_SERIAL_MULTI_INSTANTIATE) += serial-multi-instantiate.o
> obj-$(CONFIG_MLX_PLATFORM) += mlx-platform.o
> obj-$(CONFIG_TOUCHSCREEN_DMI) += touchscreen_dmi.o
> obj-$(CONFIG_WIRELESS_HOTKEY) += wireless-hotkey.o
> diff --git a/drivers/platform/x86/i2c-multi-instantiate.c b/drivers/platform/x86/serial-multi-instantiate.c
> similarity index 52%
> rename from drivers/platform/x86/i2c-multi-instantiate.c
> rename to drivers/platform/x86/serial-multi-instantiate.c
> index 4956a1df5b90..32fb3f904547 100644
> --- a/drivers/platform/x86/i2c-multi-instantiate.c
> +++ b/drivers/platform/x86/serial-multi-instantiate.c
> @@ -1,6 +1,6 @@
> // SPDX-License-Identifier: GPL-2.0+
> /*
> - * I2C multi-instantiate driver, pseudo driver to instantiate multiple
> + * Serial multi-instantiate driver, pseudo driver to instantiate multiple
> * i2c-clients from a single fwnode.
s/i2c-clients/client devices/
so you don't have to touch these comments again in the subsequent patches.
> *
> * Copyright 2018 Hans de Goede <hdegoede@redhat.com>
> @@ -21,29 +21,29 @@
> #define IRQ_RESOURCE_GPIO 1
> #define IRQ_RESOURCE_APIC 2
>
> -struct i2c_inst_data {
> +struct smi_instance {
> const char *type;
> unsigned int flags;
> int irq_idx;
> };
>
> -struct i2c_multi_inst_data {
> - int num_clients;
> - struct i2c_client *clients[];
> +struct smi {
> + int i2c_num;
> + struct i2c_client *i2c_devs[];
> };
>
> -static int i2c_multi_inst_probe(struct platform_device *pdev)
> +static int smi_probe(struct platform_device *pdev)
> {
> - struct i2c_multi_inst_data *multi;
> - const struct i2c_inst_data *inst_data;
> struct i2c_board_info board_info = {};
> + const struct smi_instance *inst;
> struct device *dev = &pdev->dev;
> struct acpi_device *adev;
> + struct smi *smi;
> char name[32];
> int i, ret;
>
> - inst_data = device_get_match_data(dev);
> - if (!inst_data) {
> + inst = device_get_match_data(dev);
> + if (!inst) {
> dev_err(dev, "Error ACPI match data is missing\n");
> return -ENODEV;
> }
> @@ -55,33 +55,32 @@ static int i2c_multi_inst_probe(struct platform_device *pdev)
> if (ret < 0)
> return ret;
>
> - multi = devm_kmalloc(dev, struct_size(multi, clients, ret), GFP_KERNEL);
> - if (!multi)
> + smi = devm_kmalloc(dev, struct_size(smi, i2c_devs, ret), GFP_KERNEL);
> + if (!smi)
> return -ENOMEM;
>
> - multi->num_clients = ret;
> + smi->i2c_num = ret;
>
> - for (i = 0; i < multi->num_clients && inst_data[i].type; i++) {
> + for (i = 0; i < smi->i2c_num && inst[i].type; i++) {
> memset(&board_info, 0, sizeof(board_info));
> - strlcpy(board_info.type, inst_data[i].type, I2C_NAME_SIZE);
> - snprintf(name, sizeof(name), "%s-%s.%d", dev_name(dev),
> - inst_data[i].type, i);
> + strlcpy(board_info.type, inst[i].type, I2C_NAME_SIZE);
> + snprintf(name, sizeof(name), "%s-%s.%d", dev_name(dev), inst[i].type, i);
> board_info.dev_name = name;
> - switch (inst_data[i].flags & IRQ_RESOURCE_TYPE) {
> + switch (inst[i].flags & IRQ_RESOURCE_TYPE) {
> case IRQ_RESOURCE_GPIO:
> - ret = acpi_dev_gpio_irq_get(adev, inst_data[i].irq_idx);
> + ret = acpi_dev_gpio_irq_get(adev, inst[i].irq_idx);
> if (ret < 0) {
> dev_err(dev, "Error requesting irq at index %d: %d\n",
> - inst_data[i].irq_idx, ret);
> + inst[i].irq_idx, ret);
> goto error;
> }
> board_info.irq = ret;
> break;
> case IRQ_RESOURCE_APIC:
> - ret = platform_get_irq(pdev, inst_data[i].irq_idx);
> + ret = platform_get_irq(pdev, inst[i].irq_idx);
> if (ret < 0) {
> dev_dbg(dev, "Error requesting irq at index %d: %d\n",
> - inst_data[i].irq_idx, ret);
> + inst[i].irq_idx, ret);
> goto error;
> }
> board_info.irq = ret;
> @@ -90,48 +89,48 @@ static int i2c_multi_inst_probe(struct platform_device *pdev)
> board_info.irq = 0;
> break;
> }
> - multi->clients[i] = i2c_acpi_new_device(dev, i, &board_info);
> - if (IS_ERR(multi->clients[i])) {
> - ret = dev_err_probe(dev, PTR_ERR(multi->clients[i]),
> + smi->i2c_devs[i] = i2c_acpi_new_device(dev, i, &board_info);
> + if (IS_ERR(smi->i2c_devs[i])) {
> + ret = dev_err_probe(dev, PTR_ERR(smi->i2c_devs[i]),
> "Error creating i2c-client, idx %d\n", i);
> goto error;
> }
> }
> - if (i < multi->num_clients) {
> + if (i < smi->i2c_num) {
> dev_err(dev, "Error finding driver, idx %d\n", i);
> ret = -ENODEV;
> goto error;
> }
>
> - platform_set_drvdata(pdev, multi);
> + platform_set_drvdata(pdev, smi);
> return 0;
>
> error:
> while (--i >= 0)
> - i2c_unregister_device(multi->clients[i]);
> + i2c_unregister_device(smi->i2c_devs[i]);
>
> return ret;
> }
>
> -static int i2c_multi_inst_remove(struct platform_device *pdev)
> +static int smi_remove(struct platform_device *pdev)
> {
> - struct i2c_multi_inst_data *multi = platform_get_drvdata(pdev);
> + struct smi *smi = platform_get_drvdata(pdev);
> int i;
>
> - for (i = 0; i < multi->num_clients; i++)
> - i2c_unregister_device(multi->clients[i]);
> + for (i = 0; i < smi->i2c_num; i++)
> + i2c_unregister_device(smi->i2c_devs[i]);
>
> return 0;
> }
>
> -static const struct i2c_inst_data bsg1160_data[] = {
> +static const struct smi_instance bsg1160_data[] = {
> { "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
> { "bmc150_magn" },
> { "bmg160" },
> {}
> };
>
> -static const struct i2c_inst_data bsg2150_data[] = {
> +static const struct smi_instance bsg2150_data[] = {
> { "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
> { "bmc150_magn" },
> /* The resources describe a 3th client, but it is not really there. */
> @@ -139,7 +138,7 @@ static const struct i2c_inst_data bsg2150_data[] = {
> {}
> };
>
> -static const struct i2c_inst_data int3515_data[] = {
> +static const struct smi_instance int3515_data[] = {
> { "tps6598x", IRQ_RESOURCE_APIC, 0 },
> { "tps6598x", IRQ_RESOURCE_APIC, 1 },
> { "tps6598x", IRQ_RESOURCE_APIC, 2 },
> @@ -148,27 +147,27 @@ static const struct i2c_inst_data int3515_data[] = {
> };
>
> /*
> - * Note new device-ids must also be added to i2c_multi_instantiate_ids in
> + * Note new device-ids must also be added to serial_multi_instantiate_ids in
> * drivers/acpi/scan.c: acpi_device_enumeration_by_parent().
> */
> -static const struct acpi_device_id i2c_multi_inst_acpi_ids[] = {
> +static const struct acpi_device_id smi_acpi_ids[] = {
> { "BSG1160", (unsigned long)bsg1160_data },
> { "BSG2150", (unsigned long)bsg2150_data },
> { "INT3515", (unsigned long)int3515_data },
> { }
> };
> -MODULE_DEVICE_TABLE(acpi, i2c_multi_inst_acpi_ids);
> +MODULE_DEVICE_TABLE(acpi, smi_acpi_ids);
>
> -static struct platform_driver i2c_multi_inst_driver = {
> +static struct platform_driver smi_driver = {
> .driver = {
> - .name = "I2C multi instantiate pseudo device driver",
> - .acpi_match_table = i2c_multi_inst_acpi_ids,
> + .name = "Serial multi instantiate pseudo device driver",
> + .acpi_match_table = smi_acpi_ids,
> },
> - .probe = i2c_multi_inst_probe,
> - .remove = i2c_multi_inst_remove,
> + .probe = smi_probe,
> + .remove = smi_remove,
> };
> -module_platform_driver(i2c_multi_inst_driver);
> +module_platform_driver(smi_driver);
>
> -MODULE_DESCRIPTION("I2C multi instantiate pseudo device driver");
> +MODULE_DESCRIPTION("Serial multi instantiate pseudo device driver");
> MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
> MODULE_LICENSE("GPL");
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v5 6/9] platform/x86: serial-multi-instantiate: Reorganize I2C functions
2022-01-21 14:32 ` [PATCH v5 6/9] platform/x86: serial-multi-instantiate: Reorganize I2C functions Stefan Binding
@ 2022-01-21 15:27 ` Rafael J. Wysocki
0 siblings, 0 replies; 18+ messages in thread
From: Rafael J. Wysocki @ 2022-01-21 15:27 UTC (permalink / raw)
To: Stefan Binding
Cc: Mark Brown, Rafael J . Wysocki, Len Brown, Hans de Goede,
Mark Gross, Jaroslav Kysela, Takashi Iwai,
moderated list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEM...,
Linux Kernel Mailing List, linux-spi, ACPI Devel Maling List,
Platform Driver, patches, Lucas Tanure
On Fri, Jan 21, 2022 at 3:33 PM Stefan Binding
<sbinding@opensource.cirrus.com> wrote:
>
> From: Lucas Tanure <tanureal@opensource.cirrus.com>
>
> Reorganize I2C functions to accommodate SPI support
> Split the probe and factor out parts of the code
> that will be used in the SPI support
>
> Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
> Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
> ---
> .../platform/x86/serial-multi-instantiate.c | 145 +++++++++++-------
> 1 file changed, 90 insertions(+), 55 deletions(-)
>
> diff --git a/drivers/platform/x86/serial-multi-instantiate.c b/drivers/platform/x86/serial-multi-instantiate.c
> index 32fb3f904547..162ec20a861a 100644
> --- a/drivers/platform/x86/serial-multi-instantiate.c
> +++ b/drivers/platform/x86/serial-multi-instantiate.c
> @@ -29,96 +29,131 @@ struct smi_instance {
>
> struct smi {
> int i2c_num;
> - struct i2c_client *i2c_devs[];
> + struct i2c_client **i2c_devs;
> };
>
> -static int smi_probe(struct platform_device *pdev)
> +static int smi_get_irq(struct platform_device *pdev, struct acpi_device *adev,
> + const struct smi_instance *inst)
> +{
> + int ret;
> +
> + switch (inst->flags & IRQ_RESOURCE_TYPE) {
> + case IRQ_RESOURCE_GPIO:
> + ret = acpi_dev_gpio_irq_get(adev, inst->irq_idx);
> + break;
> + case IRQ_RESOURCE_APIC:
> + ret = platform_get_irq(pdev, inst->irq_idx);
> + break;
> + default:
> + ret = 0;
> + break;
return 0;
would be slightly more efficient here
> + }
> +
> + if (ret < 0)
> + dev_err_probe(&pdev->dev, ret, "Error requesting irq at index %d: %d\n",
> + inst->irq_idx, ret);
> +
> + return ret;
> +}
> +
> +static void smi_devs_unregister(struct smi *smi)
> +{
> + while (smi->i2c_num > 0)
> + i2c_unregister_device(smi->i2c_devs[--smi->i2c_num]);
> +}
> +
> +/**
> + * smi_i2c_probe - Instantiate multiple I2C devices from inst array
> + * @pdev: Platform device
> + * @adev: ACPI device
> + * @smi: Internal struct for Serial multi instantiate driver
> + * @inst: Array of instances to probe
This is called inst_array below.
> + *
> + * Returns the number of I2C devices instantiate, Zero if none is found or a negative error code.
> + */
> +static int smi_i2c_probe(struct platform_device *pdev, struct acpi_device *adev, struct smi *smi,
> + const struct smi_instance *inst_array)
> {
> struct i2c_board_info board_info = {};
> - const struct smi_instance *inst;
> struct device *dev = &pdev->dev;
> - struct acpi_device *adev;
> - struct smi *smi;
> char name[32];
> - int i, ret;
> + int i, ret, count;
>
> - inst = device_get_match_data(dev);
> - if (!inst) {
> - dev_err(dev, "Error ACPI match data is missing\n");
> - return -ENODEV;
> - }
> -
> - adev = ACPI_COMPANION(dev);
> -
> - /* Count number of clients to instantiate */
> ret = i2c_acpi_client_count(adev);
> - if (ret < 0)
> - return ret;
> + if (ret <= 0)
> + return ret == 0 ? -ENODEV : ret;
I would prefer
if ret < 0)
return ret;
else if (!ret)
return -ENODEV;
>
> - smi = devm_kmalloc(dev, struct_size(smi, i2c_devs, ret), GFP_KERNEL);
> - if (!smi)
> - return -ENOMEM;
> + count = ret;
>
> - smi->i2c_num = ret;
> + smi->i2c_devs = devm_kcalloc(dev, count, sizeof(*smi->i2c_devs), GFP_KERNEL);
> + if (!smi->i2c_devs)
> + return -ENOMEM;
>
> - for (i = 0; i < smi->i2c_num && inst[i].type; i++) {
> + for (i = 0; i < count && inst_array[i].type; i++) {
> memset(&board_info, 0, sizeof(board_info));
> - strlcpy(board_info.type, inst[i].type, I2C_NAME_SIZE);
> - snprintf(name, sizeof(name), "%s-%s.%d", dev_name(dev), inst[i].type, i);
> + strscpy(board_info.type, inst_array[i].type, I2C_NAME_SIZE);
The switch-over from strlcpy() to strscpy() should be mentioned in the
changelog.
> + snprintf(name, sizeof(name), "%s-%s.%d", dev_name(dev), inst_array[i].type, i);
> board_info.dev_name = name;
> - switch (inst[i].flags & IRQ_RESOURCE_TYPE) {
> - case IRQ_RESOURCE_GPIO:
> - ret = acpi_dev_gpio_irq_get(adev, inst[i].irq_idx);
> - if (ret < 0) {
> - dev_err(dev, "Error requesting irq at index %d: %d\n",
> - inst[i].irq_idx, ret);
> - goto error;
> - }
> - board_info.irq = ret;
> - break;
> - case IRQ_RESOURCE_APIC:
> - ret = platform_get_irq(pdev, inst[i].irq_idx);
> - if (ret < 0) {
> - dev_dbg(dev, "Error requesting irq at index %d: %d\n",
> - inst[i].irq_idx, ret);
> - goto error;
> - }
> - board_info.irq = ret;
> - break;
> - default:
> - board_info.irq = 0;
> - break;
> - }
> +
> + ret = smi_get_irq(pdev, adev, &inst_array[i]);
> + if (ret < 0)
> + goto error;
> + board_info.irq = ret;
> +
> smi->i2c_devs[i] = i2c_acpi_new_device(dev, i, &board_info);
> if (IS_ERR(smi->i2c_devs[i])) {
> ret = dev_err_probe(dev, PTR_ERR(smi->i2c_devs[i]),
> "Error creating i2c-client, idx %d\n", i);
> goto error;
> }
> + smi->i2c_num++;
> }
> - if (i < smi->i2c_num) {
> + if (smi->i2c_num < count) {
> dev_err(dev, "Error finding driver, idx %d\n", i);
That's not particularly informative and so not particularly useful for
a casual receiver of this message. I'd make it dev_dbg().
> ret = -ENODEV;
> goto error;
> }
>
> - platform_set_drvdata(pdev, smi);
> - return 0;
> + dev_info(dev, "Instantiated %d I2C devices.\n", smi->i2c_num);
>
> + return 0;
> error:
> - while (--i >= 0)
> - i2c_unregister_device(smi->i2c_devs[i]);
> + smi_devs_unregister(smi);
>
> return ret;
> }
>
> +static int smi_probe(struct platform_device *pdev)
> +{
> + const struct smi_instance *inst_array;
> + struct device *dev = &pdev->dev;
> + struct acpi_device *adev;
> + struct smi *smi;
> +
> + inst_array = device_get_match_data(dev);
> + if (!inst_array) {
> + dev_err(dev, "Error ACPI match data is missing\n");
Again, this isn't very informative to someone reading this message on
a random system, so I'd change the log level.
> + return -ENODEV;
> + }
> +
> + adev = ACPI_COMPANION(dev);
> + if (!adev)
> + return -ENODEV;
Since you're at it anyway, I'd check the companion's presence upfront,
because you can't do much without it in any case.
> +
> + smi = devm_kzalloc(dev, sizeof(*smi), GFP_KERNEL);
> + if (!smi)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, smi);
> +
> + return smi_i2c_probe(pdev, adev, smi, inst_array);
> +}
> +
> static int smi_remove(struct platform_device *pdev)
> {
> struct smi *smi = platform_get_drvdata(pdev);
> - int i;
>
> - for (i = 0; i < smi->i2c_num; i++)
> - i2c_unregister_device(smi->i2c_devs[i]);
> + smi_devs_unregister(smi);
>
> return 0;
> }
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v5 7/9] platform/x86: serial-multi-instantiate: Add SPI support
2022-01-21 14:32 ` [PATCH v5 7/9] platform/x86: serial-multi-instantiate: Add SPI support Stefan Binding
@ 2022-01-21 15:31 ` Rafael J. Wysocki
2022-01-21 16:55 ` Stefan Binding
0 siblings, 1 reply; 18+ messages in thread
From: Rafael J. Wysocki @ 2022-01-21 15:31 UTC (permalink / raw)
To: Stefan Binding
Cc: Mark Brown, Rafael J . Wysocki, Len Brown, Hans de Goede,
Mark Gross, Jaroslav Kysela, Takashi Iwai,
moderated list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEM...,
Linux Kernel Mailing List, linux-spi, ACPI Devel Maling List,
Platform Driver, patches
On Fri, Jan 21, 2022 at 3:33 PM Stefan Binding
<sbinding@opensource.cirrus.com> wrote:
>
> Add support for spi bus in serial-multi-instantiate driver
>
> Some peripherals can have either a I2C or a SPI connection
> to the host (but not both) but use the same HID for both
> types. So it is not possible to use the HID to determine
> whether it is I2C or SPI. The driver must check the node
> to see if it contains I2cSerialBus or SpiSerialBus entries.
>
> For backwards-compatibility with the existing nodes I2C is
> checked first and if such entries are found ONLY I2C devices
> are created. Since some existing nodes that were already
> handled by this driver could also contain unrelated
> SpiSerialBus nodes that were previously ignored, and this
> preserves that behavior. If there is ever a need to handle
> a node where both I2C and SPI devices must be instantiated
> this can be added in future.
>
> Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
> ---
> drivers/acpi/scan.c | 13 +-
> drivers/platform/x86/Kconfig | 10 +-
> .../platform/x86/serial-multi-instantiate.c | 174 +++++++++++++++---
> 3 files changed, 161 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> index 8b237eb4e029..38c4f55960f4 100644
> --- a/drivers/acpi/scan.c
> +++ b/drivers/acpi/scan.c
> @@ -1734,12 +1734,13 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
> bool is_serial_bus_slave = false;
> static const struct acpi_device_id ignore_serial_bus_ids[] = {
> /*
> - * These devices have multiple I2cSerialBus resources and an i2c-client
> - * must be instantiated for each, each with its own i2c_device_id.
> - * Normally we only instantiate an i2c-client for the first resource,
> - * using the ACPI HID as id. These special cases are handled by the
> - * drivers/platform/x86/serial-multi-instantiate.c driver, which knows
> - * which i2c_device_id to use for each resource.
> + * These devices have multiple I2cSerialBus/SpiSerialBus resources
> + * and an (i2c/spi)-client must be instantiated for each, each with
> + * its own i2c_device_id/spi_device_id.
> + * Normally we only instantiate an (i2c/spi)-client for the first
> + * resource, using the ACPI HID as id. These special cases are handled
> + * by the drivers/platform/x86/serial-multi-instantiate.c driver, which
> + * knows which i2c_device_id or spi_device_id to use for each resource.
> */
> {"BSG1160", },
> {"BSG2150", },
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 5b65d687f046..28f5bbf0f27a 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -991,12 +991,12 @@ config TOPSTAR_LAPTOP
> If you have a Topstar laptop, say Y or M here.
>
> config SERIAL_MULTI_INSTANTIATE
> - tristate "I2C multi instantiate pseudo device driver"
> - depends on I2C && ACPI
> + tristate "I2C and SPI multi instantiate pseudo device driver"
> + depends on I2C && SPI && ACPI
Should this be (I2C || SPI) && ACPI ?
> help
> - Some ACPI-based systems list multiple i2c-devices in a single ACPI
> - firmware-node. This driver will instantiate separate i2c-clients
> - for each device in the firmware-node.
> + Some ACPI-based systems list multiple i2c/spi devices in a
> + single ACPI firmware-node. This driver will instantiate separate
> + i2c-clients or spi-devices for each device in the firmware-node.
>
> To compile this driver as a module, choose M here: the module
> will be called serial-multi-instantiate.
> diff --git a/drivers/platform/x86/serial-multi-instantiate.c b/drivers/platform/x86/serial-multi-instantiate.c
> index 162ec20a861a..535c80789852 100644
> --- a/drivers/platform/x86/serial-multi-instantiate.c
> +++ b/drivers/platform/x86/serial-multi-instantiate.c
> @@ -1,7 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0+
> /*
> * Serial multi-instantiate driver, pseudo driver to instantiate multiple
> - * i2c-clients from a single fwnode.
> + * i2c-clients or spi-devices from a single fwnode.
> *
> * Copyright 2018 Hans de Goede <hdegoede@redhat.com>
> */
> @@ -14,6 +14,7 @@
> #include <linux/module.h>
> #include <linux/platform_device.h>
> #include <linux/property.h>
> +#include <linux/spi/spi.h>
> #include <linux/types.h>
>
> #define IRQ_RESOURCE_TYPE GENMASK(1, 0)
> @@ -21,15 +22,28 @@
> #define IRQ_RESOURCE_GPIO 1
> #define IRQ_RESOURCE_APIC 2
>
> +enum smi_bus_type {
> + SMI_I2C,
> + SMI_SPI,
> + SMI_AUTO_DETECT,
> +};
> +
> struct smi_instance {
> const char *type;
> unsigned int flags;
> int irq_idx;
> };
>
> +struct smi_node {
> + enum smi_bus_type bus_type;
> + struct smi_instance instances[];
> +};
> +
> struct smi {
> int i2c_num;
> + int spi_num;
> struct i2c_client **i2c_devs;
> + struct spi_device **spi_devs;
> };
>
> static int smi_get_irq(struct platform_device *pdev, struct acpi_device *adev,
> @@ -60,6 +74,93 @@ static void smi_devs_unregister(struct smi *smi)
> {
> while (smi->i2c_num > 0)
> i2c_unregister_device(smi->i2c_devs[--smi->i2c_num]);
> +
> + while (smi->spi_num > 0)
> + spi_unregister_device(smi->spi_devs[--smi->spi_num]);
> +}
> +
> +/**
> + * smi_spi_probe - Instantiate multiple SPI devices from inst array
> + * @pdev: Platform device
> + * @adev: ACPI device
> + * @smi: Internal struct for Serial multi instantiate driver
> + * @inst: Array of instances to probe
This is called inst_array below.
> + *
> + * Returns the number of SPI devices instantiate, Zero if none is found or a negative error code.
> + */
> +static int smi_spi_probe(struct platform_device *pdev, struct acpi_device *adev, struct smi *smi,
> + const struct smi_instance *inst_array)
> +{
> + struct device *dev = &pdev->dev;
> + struct spi_controller *ctlr;
> + struct spi_device *spi_dev;
> + char name[50];
> + int i, ret, count;
> +
> + ret = acpi_spi_count_resources(adev);
> + if (ret <= 0)
> + return ret == 0 ? -ENODEV : ret;
> +
> + count = ret;
> +
> + smi->spi_devs = devm_kcalloc(dev, count, sizeof(*smi->spi_devs), GFP_KERNEL);
> + if (!smi->spi_devs)
> + return -ENOMEM;
> +
> + for (i = 0; i < count && inst_array[i].type; i++) {
> +
> + spi_dev = acpi_spi_device_alloc(NULL, adev, i);
> + if (IS_ERR(spi_dev)) {
> + ret = PTR_ERR(spi_dev);
> + dev_err_probe(dev, ret, "failed to allocate SPI device %s from ACPI: %d\n",
> + dev_name(&adev->dev), ret);
> + goto error;
> + }
> +
> + ctlr = spi_dev->controller;
> +
> + strscpy(spi_dev->modalias, inst_array[i].type, sizeof(spi_dev->modalias));
> +
> + ret = smi_get_irq(pdev, adev, &inst_array[i]);
> + if (ret < 0) {
> + spi_dev_put(spi_dev);
> + goto error;
> + }
> + spi_dev->irq = ret;
> +
> + snprintf(name, sizeof(name), "%s-%s-%s.%d", dev_name(&ctlr->dev), dev_name(dev),
> + inst_array[i].type, i);
> + spi_dev->dev.init_name = name;
> +
> + ret = spi_add_device(spi_dev);
> + if (ret) {
> + dev_err_probe(&ctlr->dev, ret,
> + "failed to add SPI device %s from ACPI: %d\n",
> + dev_name(&adev->dev), ret);
> + spi_dev_put(spi_dev);
> + goto error;
> + }
> +
> + dev_dbg(dev, "SPI device %s using chip select %u", name, spi_dev->chip_select);
> +
> + smi->spi_devs[i] = spi_dev;
> + smi->spi_num++;
> + }
> +
> + if (smi->spi_num < count) {
> + dev_err(dev, "Error finding driver, idx %d\n", i);
Another kind of debug message.
> + ret = -ENODEV;
> + goto error;
> + }
> +
> + dev_info(dev, "Instantiated %d SPI devices.\n", smi->spi_num);
> +
> + return 0;
> +error:
> + smi_devs_unregister(smi);
> +
> + return ret;
> +
> }
>
> /**
> @@ -125,13 +226,13 @@ static int smi_i2c_probe(struct platform_device *pdev, struct acpi_device *adev,
>
> static int smi_probe(struct platform_device *pdev)
> {
> - const struct smi_instance *inst_array;
> struct device *dev = &pdev->dev;
> + const struct smi_node *node;
> struct acpi_device *adev;
> struct smi *smi;
>
> - inst_array = device_get_match_data(dev);
> - if (!inst_array) {
> + node = device_get_match_data(dev);
> + if (!node) {
> dev_err(dev, "Error ACPI match data is missing\n");
> return -ENODEV;
> }
> @@ -146,7 +247,21 @@ static int smi_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, smi);
>
> - return smi_i2c_probe(pdev, adev, smi, inst_array);
> + switch (node->bus_type) {
> + case SMI_I2C:
> + return smi_i2c_probe(pdev, adev, smi, node->instances);
> + case SMI_SPI:
> + return smi_spi_probe(pdev, adev, smi, node->instances);
> + case SMI_AUTO_DETECT:
> + if (i2c_acpi_client_count(adev) > 0)
> + return smi_i2c_probe(pdev, adev, smi, node->instances);
> + else
> + return smi_spi_probe(pdev, adev, smi, node->instances);
> + default:
> + break;
Why is this needed?
> + }
> +
> + return 0; /* never reached */
> }
>
> static int smi_remove(struct platform_device *pdev)
> @@ -158,27 +273,36 @@ static int smi_remove(struct platform_device *pdev)
> return 0;
> }
>
> -static const struct smi_instance bsg1160_data[] = {
> - { "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
> - { "bmc150_magn" },
> - { "bmg160" },
> - {}
> +static const struct smi_node bsg1160_data = {
> + .instances = {
> + { "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
> + { "bmc150_magn" },
> + { "bmg160" },
> + {}
> + },
> + .bus_type = SMI_I2C,
> };
>
> -static const struct smi_instance bsg2150_data[] = {
> - { "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
> - { "bmc150_magn" },
> - /* The resources describe a 3th client, but it is not really there. */
> - { "bsg2150_dummy_dev" },
> - {}
> +static const struct smi_node bsg2150_data = {
> + .instances = {
> + { "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
> + { "bmc150_magn" },
> + /* The resources describe a 3th client, but it is not really there. */
> + { "bsg2150_dummy_dev" },
> + {}
> + },
> + .bus_type = SMI_I2C,
> };
>
> -static const struct smi_instance int3515_data[] = {
> - { "tps6598x", IRQ_RESOURCE_APIC, 0 },
> - { "tps6598x", IRQ_RESOURCE_APIC, 1 },
> - { "tps6598x", IRQ_RESOURCE_APIC, 2 },
> - { "tps6598x", IRQ_RESOURCE_APIC, 3 },
> - {}
> +static const struct smi_node int3515_data = {
> + .instances = {
> + { "tps6598x", IRQ_RESOURCE_APIC, 0 },
> + { "tps6598x", IRQ_RESOURCE_APIC, 1 },
> + { "tps6598x", IRQ_RESOURCE_APIC, 2 },
> + { "tps6598x", IRQ_RESOURCE_APIC, 3 },
> + {}
> + },
> + .bus_type = SMI_I2C,
> };
>
> /*
> @@ -186,9 +310,9 @@ static const struct smi_instance int3515_data[] = {
> * drivers/acpi/scan.c: acpi_device_enumeration_by_parent().
> */
> static const struct acpi_device_id smi_acpi_ids[] = {
> - { "BSG1160", (unsigned long)bsg1160_data },
> - { "BSG2150", (unsigned long)bsg2150_data },
> - { "INT3515", (unsigned long)int3515_data },
> + { "BSG1160", (unsigned long)&bsg1160_data },
> + { "BSG2150", (unsigned long)&bsg2150_data },
> + { "INT3515", (unsigned long)&int3515_data },
> { }
> };
> MODULE_DEVICE_TABLE(acpi, smi_acpi_ids);
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v5 9/9] ACPI / scan: Create platform device for CS35L41
2022-01-21 14:32 ` [PATCH v5 9/9] ACPI / scan: Create platform device for CS35L41 Stefan Binding
@ 2022-01-21 16:02 ` Rafael J. Wysocki
0 siblings, 0 replies; 18+ messages in thread
From: Rafael J. Wysocki @ 2022-01-21 16:02 UTC (permalink / raw)
To: Stefan Binding
Cc: Mark Brown, Rafael J . Wysocki, Len Brown, Hans de Goede,
Mark Gross, Jaroslav Kysela, Takashi Iwai,
moderated list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEM...,
Linux Kernel Mailing List, linux-spi, ACPI Devel Maling List,
Platform Driver, patches, Lucas Tanure
On Fri, Jan 21, 2022 at 3:33 PM Stefan Binding
<sbinding@opensource.cirrus.com> wrote:
>
> From: Lucas Tanure <tanureal@opensource.cirrus.com>
>
> The ACPI device with CSC3551 or CLSA0100 are sound cards
> with multiple instances of CS35L41 connectec by I2C or SPI
s/connectec/connected/
> to the main CPU.
>
> We add an ID to the ignore_serial_bus_ids list to enumerate
> all I2C or SPI devices correctly.
The serial-multi-instantiate change needs to be mentioned too.
> Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
> Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
> ---
> drivers/acpi/scan.c | 3 +++
> drivers/platform/x86/serial-multi-instantiate.c | 14 ++++++++++++++
> 2 files changed, 17 insertions(+)
>
> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> index 38c4f55960f4..b59e4c994878 100644
> --- a/drivers/acpi/scan.c
> +++ b/drivers/acpi/scan.c
> @@ -1744,8 +1744,11 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
> */
> {"BSG1160", },
> {"BSG2150", },
> + {"CSC3551", },
> {"INT33FE", },
> {"INT3515", },
> + /* Non-conforming _HID for Cirrus Logic already released */
> + {"CLSA0100", },
> /*
> * HIDs of device with an UartSerialBusV2 resource for which userspace
> * expects a regular tty cdev to be created (instead of the in kernel
> diff --git a/drivers/platform/x86/serial-multi-instantiate.c b/drivers/platform/x86/serial-multi-instantiate.c
> index 535c80789852..cef201065fdb 100644
> --- a/drivers/platform/x86/serial-multi-instantiate.c
> +++ b/drivers/platform/x86/serial-multi-instantiate.c
> @@ -305,6 +305,17 @@ static const struct smi_node int3515_data = {
> .bus_type = SMI_I2C,
> };
>
> +static const struct smi_node cs35l41_hda = {
> + .instances = {
> + { "cs35l41-hda", IRQ_RESOURCE_GPIO, 0 },
> + { "cs35l41-hda", IRQ_RESOURCE_GPIO, 0 },
> + { "cs35l41-hda", IRQ_RESOURCE_GPIO, 0 },
> + { "cs35l41-hda", IRQ_RESOURCE_GPIO, 0 },
> + {}
> + },
> + .bus_type = SMI_AUTO_DETECT,
> +};
> +
> /*
> * Note new device-ids must also be added to serial_multi_instantiate_ids in
> * drivers/acpi/scan.c: acpi_device_enumeration_by_parent().
> @@ -313,6 +324,9 @@ static const struct acpi_device_id smi_acpi_ids[] = {
> { "BSG1160", (unsigned long)&bsg1160_data },
> { "BSG2150", (unsigned long)&bsg2150_data },
> { "INT3515", (unsigned long)&int3515_data },
> + { "CSC3551", (unsigned long)&cs35l41_hda },
> + /* Non-conforming _HID for Cirrus Logic already released */
> + { "CLSA0100", (unsigned long)&cs35l41_hda },
> { }
> };
> MODULE_DEVICE_TABLE(acpi, smi_acpi_ids);
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* RE: [PATCH v5 7/9] platform/x86: serial-multi-instantiate: Add SPI support
2022-01-21 15:31 ` Rafael J. Wysocki
@ 2022-01-21 16:55 ` Stefan Binding
2022-01-21 17:14 ` Rafael J. Wysocki
0 siblings, 1 reply; 18+ messages in thread
From: Stefan Binding @ 2022-01-21 16:55 UTC (permalink / raw)
To: 'Rafael J. Wysocki'
Cc: 'Mark Brown', 'Len Brown',
'Hans de Goede', 'Mark Gross',
'Jaroslav Kysela', 'Takashi Iwai',
'moderated list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER
MANAGEM...', 'Linux Kernel Mailing List',
'linux-spi', 'ACPI Devel Maling List',
'Platform Driver',
patches
Hi,
> -----Original Message-----
> From: Rafael J. Wysocki <rafael@kernel.org>
> Sent: 21 January 2022 15:31
> To: Stefan Binding <sbinding@opensource.cirrus.com>
> Cc: Mark Brown <broonie@kernel.org>; Rafael J . Wysocki
> <rafael@kernel.org>; Len Brown <lenb@kernel.org>; Hans de Goede
> <hdegoede@redhat.com>; Mark Gross <markgross@kernel.org>; Jaroslav
> Kysela <perex@perex.cz>; Takashi Iwai <tiwai@suse.com>; moderated
> list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEM... <alsa-
> devel@alsa-project.org>; Linux Kernel Mailing List <linux-
> kernel@vger.kernel.org>; linux-spi <linux-spi@vger.kernel.org>; ACPI Devel
> Maling List <linux-acpi@vger.kernel.org>; Platform Driver <platform-driver-
> x86@vger.kernel.org>; patches@opensource.cirrus.com
> Subject: Re: [PATCH v5 7/9] platform/x86: serial-multi-instantiate: Add SPI
> support
>
> > diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> > index 5b65d687f046..28f5bbf0f27a 100644
> > --- a/drivers/platform/x86/Kconfig
> > +++ b/drivers/platform/x86/Kconfig
> > @@ -991,12 +991,12 @@ config TOPSTAR_LAPTOP
> > If you have a Topstar laptop, say Y or M here.
> >
> > config SERIAL_MULTI_INSTANTIATE
> > - tristate "I2C multi instantiate pseudo device driver"
> > - depends on I2C && ACPI
> > + tristate "I2C and SPI multi instantiate pseudo device driver"
> > + depends on I2C && SPI && ACPI
>
> Should this be (I2C || SPI) && ACPI ?
We made it dependent on both I2C and SPI because of how interconnected the
serial-multi-instantiate driver is with both SPI and I2C. We felt attempting to make
the driver compatible with one without the other would end up very complicated.
> > @@ -146,7 +247,21 @@ static int smi_probe(struct platform_device *pdev)
> >
> > platform_set_drvdata(pdev, smi);
> >
> > - return smi_i2c_probe(pdev, adev, smi, inst_array);
> > + switch (node->bus_type) {
> > + case SMI_I2C:
> > + return smi_i2c_probe(pdev, adev, smi, node->instances);
> > + case SMI_SPI:
> > + return smi_spi_probe(pdev, adev, smi, node->instances);
> > + case SMI_AUTO_DETECT:
> > + if (i2c_acpi_client_count(adev) > 0)
> > + return smi_i2c_probe(pdev, adev, smi, node->instances);
> > + else
> > + return smi_spi_probe(pdev, adev, smi, node->instances);
> > + default:
> > + break;
>
> Why is this needed?
This return code is attempting to ensure that we don’t try to guess whether we
expect devices to be I2C or SPI - especially with regards to existing devices.
We wanted to maintain compatibility with existing devices, which would all be
I2C.
For the device for which we are adding, the same HID is used by both the same
chip for both I2C and SPI, so we also needed a way to support both.
Thanks,
Stefan
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v5 7/9] platform/x86: serial-multi-instantiate: Add SPI support
2022-01-21 16:55 ` Stefan Binding
@ 2022-01-21 17:14 ` Rafael J. Wysocki
2022-01-26 15:19 ` Stefan Binding
0 siblings, 1 reply; 18+ messages in thread
From: Rafael J. Wysocki @ 2022-01-21 17:14 UTC (permalink / raw)
To: Stefan Binding
Cc: Rafael J. Wysocki, Mark Brown, Len Brown, Hans de Goede,
Mark Gross, Jaroslav Kysela, Takashi Iwai,
moderated list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEM...,
Linux Kernel Mailing List, linux-spi, ACPI Devel Maling List,
Platform Driver, patches
On Fri, Jan 21, 2022 at 5:55 PM Stefan Binding
<sbinding@opensource.cirrus.com> wrote:
>
> Hi,
>
> > -----Original Message-----
> > From: Rafael J. Wysocki <rafael@kernel.org>
> > Sent: 21 January 2022 15:31
> > To: Stefan Binding <sbinding@opensource.cirrus.com>
> > Cc: Mark Brown <broonie@kernel.org>; Rafael J . Wysocki
> > <rafael@kernel.org>; Len Brown <lenb@kernel.org>; Hans de Goede
> > <hdegoede@redhat.com>; Mark Gross <markgross@kernel.org>; Jaroslav
> > Kysela <perex@perex.cz>; Takashi Iwai <tiwai@suse.com>; moderated
> > list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEM... <alsa-
> > devel@alsa-project.org>; Linux Kernel Mailing List <linux-
> > kernel@vger.kernel.org>; linux-spi <linux-spi@vger.kernel.org>; ACPI Devel
> > Maling List <linux-acpi@vger.kernel.org>; Platform Driver <platform-driver-
> > x86@vger.kernel.org>; patches@opensource.cirrus.com
> > Subject: Re: [PATCH v5 7/9] platform/x86: serial-multi-instantiate: Add SPI
> > support
> >
>
>
> > > diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> > > index 5b65d687f046..28f5bbf0f27a 100644
> > > --- a/drivers/platform/x86/Kconfig
> > > +++ b/drivers/platform/x86/Kconfig
> > > @@ -991,12 +991,12 @@ config TOPSTAR_LAPTOP
> > > If you have a Topstar laptop, say Y or M here.
> > >
> > > config SERIAL_MULTI_INSTANTIATE
> > > - tristate "I2C multi instantiate pseudo device driver"
> > > - depends on I2C && ACPI
> > > + tristate "I2C and SPI multi instantiate pseudo device driver"
> > > + depends on I2C && SPI && ACPI
> >
> > Should this be (I2C || SPI) && ACPI ?
>
> We made it dependent on both I2C and SPI because of how interconnected the
> serial-multi-instantiate driver is with both SPI and I2C. We felt attempting to make
> the driver compatible with one without the other would end up very complicated.
That's fine IMV, but it would be good to mention it in the changelog.
> > > @@ -146,7 +247,21 @@ static int smi_probe(struct platform_device *pdev)
> > >
> > > platform_set_drvdata(pdev, smi);
> > >
> > > - return smi_i2c_probe(pdev, adev, smi, inst_array);
> > > + switch (node->bus_type) {
> > > + case SMI_I2C:
> > > + return smi_i2c_probe(pdev, adev, smi, node->instances);
> > > + case SMI_SPI:
> > > + return smi_spi_probe(pdev, adev, smi, node->instances);
> > > + case SMI_AUTO_DETECT:
> > > + if (i2c_acpi_client_count(adev) > 0)
> > > + return smi_i2c_probe(pdev, adev, smi, node->instances);
> > > + else
> > > + return smi_spi_probe(pdev, adev, smi, node->instances);
> > > + default:
> > > + break;
> >
> > Why is this needed?
>
> This return code is attempting to ensure that we don’t try to guess whether we
> expect devices to be I2C or SPI - especially with regards to existing devices.
> We wanted to maintain compatibility with existing devices, which would all be
> I2C.
> For the device for which we are adding, the same HID is used by both the same
> chip for both I2C and SPI, so we also needed a way to support both.
I meant why was the "default" case needed. Sorry for the confusion.
^ permalink raw reply [flat|nested] 18+ messages in thread
* RE: [PATCH v5 7/9] platform/x86: serial-multi-instantiate: Add SPI support
2022-01-21 17:14 ` Rafael J. Wysocki
@ 2022-01-26 15:19 ` Stefan Binding
0 siblings, 0 replies; 18+ messages in thread
From: Stefan Binding @ 2022-01-26 15:19 UTC (permalink / raw)
To: 'Rafael J. Wysocki'
Cc: 'Platform Driver',
'moderated list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER
MANAGEM...', 'ACPI Devel Maling List',
'Linux Kernel Mailing List', 'Takashi Iwai',
'Mark Gross', 'Hans de Goede',
'Mark Brown', patches, 'linux-spi',
'Len Brown'
> -----Original Message-----
> From: Alsa-devel <alsa-devel-bounces@alsa-project.org> On Behalf Of
> Rafael J. Wysocki
> Sent: 21 January 2022 17:15
> To: Stefan Binding <sbinding@opensource.cirrus.com>
> Cc: Platform Driver <platform-driver-x86@vger.kernel.org>; moderated
> list:SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEM... <alsa-
> devel@alsa-project.org>; ACPI Devel Maling List <linux-
> acpi@vger.kernel.org>; Rafael J. Wysocki <rafael@kernel.org>; Linux Kernel
> Mailing List <linux-kernel@vger.kernel.org>; Takashi Iwai <tiwai@suse.com>;
> Mark Gross <markgross@kernel.org>; Hans de Goede
> <hdegoede@redhat.com>; Mark Brown <broonie@kernel.org>;
> patches@opensource.cirrus.com; linux-spi <linux-spi@vger.kernel.org>; Len
> Brown <lenb@kernel.org>
> Subject: Re: [PATCH v5 7/9] platform/x86: serial-multi-instantiate: Add SPI
> support
>
> > > > @@ -146,7 +247,21 @@ static int smi_probe(struct platform_device
> *pdev)
> > > >
> > > > platform_set_drvdata(pdev, smi);
> > > >
> > > > - return smi_i2c_probe(pdev, adev, smi, inst_array);
> > > > + switch (node->bus_type) {
> > > > + case SMI_I2C:
> > > > + return smi_i2c_probe(pdev, adev, smi, node->instances);
> > > > + case SMI_SPI:
> > > > + return smi_spi_probe(pdev, adev, smi, node->instances);
> > > > + case SMI_AUTO_DETECT:
> > > > + if (i2c_acpi_client_count(adev) > 0)
> > > > + return smi_i2c_probe(pdev, adev, smi, node->instances);
> > > > + else
> > > > + return smi_spi_probe(pdev, adev, smi, node->instances);
> > > > + default:
> > > > + break;
> > >
> > > Why is this needed?
> >
> > This return code is attempting to ensure that we don’t try to guess
> whether we
> > expect devices to be I2C or SPI - especially with regards to existing devices.
> > We wanted to maintain compatibility with existing devices, which would all
> be
> > I2C.
> > For the device for which we are adding, the same HID is used by both the
> same
> > chip for both I2C and SPI, so we also needed a way to support both.
>
> I meant why was the "default" case needed. Sorry for the confusion.
I added a default case here purely for static analysis reasons. I don’t think it necessarily required, and I can remove it if necessary.
Thanks,
Stefan
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2022-01-26 15:19 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-21 14:32 [PATCH v5 0/9] Support Spi in i2c-multi-instantiate driver Stefan Binding
2022-01-21 14:32 ` [PATCH v5 1/9] spi: Make spi_alloc_device and spi_add_device public again Stefan Binding
2022-01-21 14:32 ` [PATCH v5 2/9] spi: Create helper API to lookup ACPI info for spi device Stefan Binding
2022-01-21 14:32 ` [PATCH v5 3/9] spi: Support selection of the index of the ACPI Spi Resource before alloc Stefan Binding
2022-01-21 14:32 ` [PATCH v5 4/9] spi: Add API to count spi acpi resources Stefan Binding
2022-01-21 14:32 ` [PATCH v5 5/9] platform/x86: i2c-multi-instantiate: Rename it for a generic serial driver name Stefan Binding
2022-01-21 15:12 ` Rafael J. Wysocki
2022-01-21 14:32 ` [PATCH v5 6/9] platform/x86: serial-multi-instantiate: Reorganize I2C functions Stefan Binding
2022-01-21 15:27 ` Rafael J. Wysocki
2022-01-21 14:32 ` [PATCH v5 7/9] platform/x86: serial-multi-instantiate: Add SPI support Stefan Binding
2022-01-21 15:31 ` Rafael J. Wysocki
2022-01-21 16:55 ` Stefan Binding
2022-01-21 17:14 ` Rafael J. Wysocki
2022-01-26 15:19 ` Stefan Binding
2022-01-21 14:32 ` [PATCH v5 8/9] ALSA: hda/realtek: Add support for HP Laptops Stefan Binding
2022-01-21 14:44 ` Takashi Iwai
2022-01-21 14:32 ` [PATCH v5 9/9] ACPI / scan: Create platform device for CS35L41 Stefan Binding
2022-01-21 16:02 ` Rafael J. Wysocki
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).