linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
To: "Kishon Vijay Abraham I" <kishon@ti.com>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Arnd Bergmann" <arnd@arndb.de>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Marek Vasut" <marek.vasut+renesas@gmail.com>,
	"Yoshihiro Shimoda" <yoshihiro.shimoda.uh@renesas.com>,
	"Rob Herring" <robh@kernel.org>,
	linux-pci@vger.kernel.org, linux-renesas-soc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
	Prabhakar <prabhakar.csengg@gmail.com>,
	Biju Das <biju.das.jz@bp.renesas.com>,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [RFC PATCH 4/5] misc: pci_endpoint_test: Add support to pass flags for buffer allocation
Date: Wed, 26 Jan 2022 19:50:42 +0000	[thread overview]
Message-ID: <20220126195043.28376-5-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
In-Reply-To: <20220126195043.28376-1-prabhakar.mahadev-lad.rj@bp.renesas.com>

By default GFP_KERNEL flag is used for buffer allocation in read, write
and copy test and then later mapped using streaming DMA api. But on
Renesas RZ/G2{EHMN} platforms using the default flag causes the tests to
fail. Allocating the buffers from DMA zone (using the GFP_DMA flag) make
the test cases to pass.

To handle such case add flags as part of struct pci_endpoint_test_data
so that platforms can pass the required flags based on the requirement.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
Hi All,

This patch is based on the conversation where switching to streaming
DMA api causes read/write/copy tests to fail on Renesas RZ/G2 platforms
when buffers are allocated using GFP_KERNEL.

[0] https://www.spinics.net/lists/linux-pci/msg92385.html

Cheers,
Prabhakar
---
 drivers/misc/pci_endpoint_test.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index 0a00d45830e9..974546992c5e 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -117,6 +117,7 @@ struct pci_endpoint_test {
 	enum pci_barno test_reg_bar;
 	size_t alignment;
 	size_t dmac_data_alignment;
+	gfp_t flags;
 	const char *name;
 };
 
@@ -125,6 +126,7 @@ struct pci_endpoint_test_data {
 	size_t alignment;
 	int irq_type;
 	size_t dmac_data_alignment;
+	gfp_t flags;
 };
 
 static inline u32 pci_endpoint_test_readl(struct pci_endpoint_test *test,
@@ -381,7 +383,7 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test,
 		goto err;
 	}
 
-	orig_src_addr = kzalloc(size + alignment, GFP_KERNEL);
+	orig_src_addr = kzalloc(size + alignment, test->flags);
 	if (!orig_src_addr) {
 		dev_err(dev, "Failed to allocate source buffer\n");
 		ret = false;
@@ -414,7 +416,7 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test,
 
 	src_crc32 = crc32_le(~0, src_addr, size);
 
-	orig_dst_addr = kzalloc(size + alignment, GFP_KERNEL);
+	orig_dst_addr = kzalloc(size + alignment, test->flags);
 	if (!orig_dst_addr) {
 		dev_err(dev, "Failed to allocate destination address\n");
 		ret = false;
@@ -518,7 +520,7 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test,
 		goto err;
 	}
 
-	orig_addr = kzalloc(size + alignment, GFP_KERNEL);
+	orig_addr = kzalloc(size + alignment, test->flags);
 	if (!orig_addr) {
 		dev_err(dev, "Failed to allocate address\n");
 		ret = false;
@@ -619,7 +621,7 @@ static bool pci_endpoint_test_read(struct pci_endpoint_test *test,
 		goto err;
 	}
 
-	orig_addr = kzalloc(size + alignment, GFP_KERNEL);
+	orig_addr = kzalloc(size + alignment, test->flags);
 	if (!orig_addr) {
 		dev_err(dev, "Failed to allocate destination address\n");
 		ret = false;
@@ -788,6 +790,7 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
 	test->alignment = 0;
 	test->pdev = pdev;
 	test->irq_type = IRQ_TYPE_UNDEFINED;
+	test->flags = GFP_KERNEL;
 
 	if (no_msi)
 		irq_type = IRQ_TYPE_LEGACY;
@@ -799,6 +802,7 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
 		test->alignment = data->alignment;
 		irq_type = data->irq_type;
 		test->dmac_data_alignment = data->dmac_data_alignment;
+		test->flags = data->flags;
 	}
 
 	init_completion(&test->irq_raised);
@@ -947,23 +951,27 @@ static const struct pci_endpoint_test_data default_data = {
 	.test_reg_bar = BAR_0,
 	.alignment = SZ_4K,
 	.irq_type = IRQ_TYPE_MSI,
+	.flags = GFP_KERNEL,
 };
 
 static const struct pci_endpoint_test_data am654_data = {
 	.test_reg_bar = BAR_2,
 	.alignment = SZ_64K,
 	.irq_type = IRQ_TYPE_MSI,
+	.flags = GFP_KERNEL,
 };
 
 static const struct pci_endpoint_test_data j721e_data = {
 	.alignment = 256,
 	.irq_type = IRQ_TYPE_MSI,
+	.flags = GFP_KERNEL,
 };
 
 static const struct pci_endpoint_test_data renesas_rzg2x_data = {
 	.test_reg_bar = BAR_0,
 	.irq_type = IRQ_TYPE_MSI,
 	.dmac_data_alignment = 8,
+	.flags = GFP_KERNEL | GFP_DMA,
 };
 
 static const struct pci_device_id pci_endpoint_test_tbl[] = {
-- 
2.25.1


  parent reply	other threads:[~2022-01-26 19:51 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-26 19:50 [RFC PATCH 0/5] PCIe EPF support for internal DMAC handling and driver update for R-Car PCIe EP to support DMAC Lad Prabhakar
2022-01-26 19:50 ` [RFC PATCH 1/5] PCI: endpoint: Add ops and flag to support internal DMAC Lad Prabhakar
2022-02-14  9:30   ` Manivannan Sadhasivam
2022-01-26 19:50 ` [RFC PATCH 2/5] PCI: endpoint: Add support to data transfer using internal dmac Lad Prabhakar
2022-02-14  9:49   ` Manivannan Sadhasivam
2022-01-26 19:50 ` [RFC PATCH 3/5] misc: pci_endpoint_test: Add driver data for Renesas RZ/G2{EHMN} Lad Prabhakar
2022-02-14 10:02   ` Manivannan Sadhasivam
2022-01-26 19:50 ` Lad Prabhakar [this message]
2022-02-14 10:11   ` [RFC PATCH 4/5] misc: pci_endpoint_test: Add support to pass flags for buffer allocation Manivannan Sadhasivam
2022-01-26 19:50 ` [RFC PATCH 5/5] PCI: rcar-ep: Add support for DMAC Lad Prabhakar
2022-02-14 10:40   ` Manivannan Sadhasivam
2022-02-21  4:32   ` [EXT] " Li Chen
2022-02-09  4:47 ` [EXT] [RFC PATCH 0/5] PCIe EPF support for internal DMAC handling and driver update for R-Car PCIe EP to support DMAC Li Chen
2022-02-09  8:52   ` Lad, Prabhakar
2022-02-10  5:54     ` Li Chen
2022-02-10  7:47       ` Greg Kroah-Hartman
2022-02-10  8:40 ` Manivannan Sadhasivam
2022-02-10  9:24   ` Lad, Prabhakar
2022-02-10 10:50     ` Manivannan Sadhasivam
2022-02-10 11:05       ` Lad, Prabhakar
2022-02-10 13:22         ` Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220126195043.28376-5-prabhakar.mahadev-lad.rj@bp.renesas.com \
    --to=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=arnd@arndb.de \
    --cc=bhelgaas@google.com \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kishon@ti.com \
    --cc=kw@linux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=marek.vasut+renesas@gmail.com \
    --cc=prabhakar.csengg@gmail.com \
    --cc=robh@kernel.org \
    --cc=yoshihiro.shimoda.uh@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).