linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Brian Norris <briannorris@chromium.org>
To: MyungJoo Ham <myungjoo.ham@samsung.com>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
	Lin Huang <hl@rock-chips.com>,
	linux-arm-kernel@lists.infradead.org,
	Derek Basehore <dbasehore@chromium.org>,
	devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
	Heiko Stuebner <heiko@sntech.de>,
	Brian Norris <briannorris@chromium.org>
Subject: [PATCH v2 09/15] PM / devfreq: rk3399_dmc: Support new disable-freq properties
Date: Thu, 27 Jan 2022 15:07:20 -0800	[thread overview]
Message-ID: <20220127150615.v2.9.I08d654522b8a1ae92ecb8d2e2a74511f778f61e5@changeid> (raw)
In-Reply-To: <20220127230727.3369358-1-briannorris@chromium.org>

Implement the newly-defined properties to allow disabling certain
power-saving-at-idle features at higher frequencies.

This is a rewritten version of work by Lin Huang <hl@rock-chips.com>.

Signed-off-by: Brian Norris <briannorris@chromium.org>
---

(no changes since v1)

 drivers/devfreq/rk3399_dmc.c | 51 +++++++++++++++++++++++++++++++++---
 1 file changed, 47 insertions(+), 4 deletions(-)

diff --git a/drivers/devfreq/rk3399_dmc.c b/drivers/devfreq/rk3399_dmc.c
index c4efbc15cbb1..fc740c1f6747 100644
--- a/drivers/devfreq/rk3399_dmc.c
+++ b/drivers/devfreq/rk3399_dmc.c
@@ -55,6 +55,12 @@ struct rk3399_dmcfreq {
 	unsigned int ddr3_odt_dis_freq;
 	unsigned int lpddr3_odt_dis_freq;
 	unsigned int lpddr4_odt_dis_freq;
+
+	unsigned int pd_idle_dis_freq;
+	unsigned int sr_idle_dis_freq;
+	unsigned int sr_mc_gate_idle_dis_freq;
+	unsigned int srpd_lite_idle_dis_freq;
+	unsigned int standby_idle_dis_freq;
 };
 
 static int rk3399_dmcfreq_target(struct device *dev, unsigned long *freq,
@@ -81,8 +87,25 @@ static int rk3399_dmcfreq_target(struct device *dev, unsigned long *freq,
 	mutex_lock(&dmcfreq->lock);
 
 	if (dmcfreq->regmap_pmu) {
+		unsigned int odt_pd_arg0 = dmcfreq->odt_pd_arg0;
+		unsigned int odt_pd_arg1 = dmcfreq->odt_pd_arg1;
 		unsigned int odt_pd_arg2 = 0;
 
+		if (target_rate >= dmcfreq->sr_idle_dis_freq)
+			odt_pd_arg0 &= ~RK3399_SET_ODT_PD_0_SR_IDLE;
+
+		if (target_rate >= dmcfreq->sr_mc_gate_idle_dis_freq)
+			odt_pd_arg0 &= ~RK3399_SET_ODT_PD_0_SR_MC_GATE_IDLE;
+
+		if (target_rate >= dmcfreq->standby_idle_dis_freq)
+			odt_pd_arg0 &= ~RK3399_SET_ODT_PD_0_STANDBY_IDLE;
+
+		if (target_rate >= dmcfreq->pd_idle_dis_freq)
+			odt_pd_arg1 &= ~RK3399_SET_ODT_PD_1_PD_IDLE;
+
+		if (target_rate >= dmcfreq->srpd_lite_idle_dis_freq)
+			odt_pd_arg1 &= ~RK3399_SET_ODT_PD_1_SRPD_LITE_IDLE;
+
 		if (target_rate >= dmcfreq->odt_dis_freq)
 			odt_pd_arg2 |= RK3399_SET_ODT_PD_2_ODT_ENABLE;
 
@@ -91,10 +114,9 @@ static int rk3399_dmcfreq_target(struct device *dev, unsigned long *freq,
 		 * (power-down) timings and to enable or disable the
 		 * ODT (on-die termination) resistors.
 		 */
-		arm_smccc_smc(ROCKCHIP_SIP_DRAM_FREQ, dmcfreq->odt_pd_arg0,
-			      dmcfreq->odt_pd_arg1,
-			      ROCKCHIP_SIP_CONFIG_DRAM_SET_ODT_PD,
-			      odt_pd_arg2, 0, 0, 0, &res);
+		arm_smccc_smc(ROCKCHIP_SIP_DRAM_FREQ, odt_pd_arg0, odt_pd_arg1,
+			      ROCKCHIP_SIP_CONFIG_DRAM_SET_ODT_PD, odt_pd_arg2,
+			      0, 0, 0, &res);
 	}
 
 	/*
@@ -230,6 +252,16 @@ static int rk3399_dmcfreq_of_props(struct rk3399_dmcfreq *data,
 {
 	int ret = 0;
 
+	/*
+	 * These are all optional, and serve as minimum bounds. Give them large
+	 * (i.e., never "disabled") values if the DT doesn't specify one.
+	 */
+	data->pd_idle_dis_freq =
+		data->sr_idle_dis_freq =
+		data->sr_mc_gate_idle_dis_freq =
+		data->srpd_lite_idle_dis_freq =
+		data->standby_idle_dis_freq = UINT_MAX;
+
 	ret |= of_property_read_u32(np, "rockchip,pd_idle",
 				    &data->pd_idle);
 	ret |= of_property_read_u32(np, "rockchip,sr_idle",
@@ -247,6 +279,17 @@ static int rk3399_dmcfreq_of_props(struct rk3399_dmcfreq *data,
 	ret |= of_property_read_u32(np, "rockchip,lpddr4_odt_dis_freq",
 				    &data->lpddr4_odt_dis_freq);
 
+	ret |= of_property_read_u32(np, "rockchip,pd-idle-dis-freq-hz",
+				    &data->pd_idle_dis_freq);
+	ret |= of_property_read_u32(np, "rockchip,sr-idle-dis-freq-hz",
+				    &data->sr_idle_dis_freq);
+	ret |= of_property_read_u32(np, "rockchip,sr-mc-gate-idle-dis-freq-hz",
+				    &data->sr_mc_gate_idle_dis_freq);
+	ret |= of_property_read_u32(np, "rockchip,srpd-lite-idle-dis-freq-hz",
+				    &data->srpd_lite_idle_dis_freq);
+	ret |= of_property_read_u32(np, "rockchip,standby-idle-dis-freq-hz",
+				    &data->standby_idle_dis_freq);
+
 	return ret;
 }
 
-- 
2.35.0.rc0.227.g00780c9af4-goog


  parent reply	other threads:[~2022-01-27 23:09 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-27 23:07 [PATCH v2 00/15] rk3399: Clean up and enable DDR DVFS Brian Norris
2022-01-27 23:07 ` [PATCH v2 01/15] dt-bindings: devfreq: rk3399_dmc: Convert to YAML Brian Norris
2022-02-09 20:17   ` Rob Herring
2022-03-04 21:23     ` Brian Norris
2022-01-27 23:07 ` [PATCH v2 02/15] dt-bindings: devfreq: rk3399_dmc: Deprecate unused/redundant properties Brian Norris
2022-01-27 23:17   ` Brian Norris
2022-01-27 23:07 ` [PATCH v2 03/15] dt-bindings: devfreq: rk3399_dmc: Fix Hz units Brian Norris
2022-02-04  1:59   ` Chanwoo Choi
2022-02-09 20:19   ` Rob Herring
2022-01-27 23:07 ` [PATCH v2 04/15] dt-bindings: devfreq: rk3399_dmc: Specify idle params in nanoseconds Brian Norris
2022-02-09 20:21   ` Rob Herring
2022-01-27 23:07 ` [PATCH v2 05/15] dt-bindings: devfreq: rk3399_dmc: Add more disable-freq properties Brian Norris
2022-02-09 20:29   ` Rob Herring
2022-01-27 23:07 ` [PATCH v2 06/15] PM / devfreq: rk3399_dmc: Drop undocumented ondemand DT props Brian Norris
2022-01-27 23:07 ` [PATCH v2 07/15] PM / devfreq: rk3399_dmc: Drop excess timing properties Brian Norris
2022-01-27 23:07 ` [PATCH v2 08/15] PM / devfreq: rk3399_dmc: Use bitfield macro definitions for ODT_PD Brian Norris
2022-01-27 23:07 ` Brian Norris [this message]
2022-01-27 23:07 ` [PATCH v2 10/15] PM / devfreq: rk3399_dmc: Support new *-ns properties Brian Norris
2022-01-27 23:07 ` [PATCH v2 11/15] arm64: dts: rk3399: Add dfi and dmc nodes Brian Norris
2022-01-27 23:07 ` [PATCH v2 12/15] arm64: dts: rockchip: Enable dmc and dfi nodes on gru Brian Norris
2022-03-04 14:47   ` Peter Geis
2022-03-04 20:47     ` Brian Norris
2022-04-06  2:05     ` Brian Norris
2022-04-07  0:18       ` Peter Geis
2022-01-27 23:07 ` [PATCH v2 13/15] PM / devfreq: rk3399_dmc: Disable edev on remove() Brian Norris
2022-01-27 23:07 ` [PATCH v2 14/15] PM / devfreq: rk3399_dmc: Use devm_pm_opp_of_add_table() Brian Norris
2022-01-27 23:07 ` [PATCH v2 15/15] PM / devfreq: rk3399_dmc: Avoid static (reused) profile Brian Norris

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220127150615.v2.9.I08d654522b8a1ae92ecb8d2e2a74511f778f61e5@changeid \
    --to=briannorris@chromium.org \
    --cc=cw00.choi@samsung.com \
    --cc=dbasehore@chromium.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=hl@rock-chips.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=myungjoo.ham@samsung.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).