From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 6A020C433EF for ; Mon, 31 Jan 2022 08:14:41 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S245440AbiAaIOk (ORCPT ); Mon, 31 Jan 2022 03:14:40 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:33382 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229514AbiAaIOe (ORCPT ); Mon, 31 Jan 2022 03:14:34 -0500 Received: from mail-wr1-x433.google.com (mail-wr1-x433.google.com [IPv6:2a00:1450:4864:20::433]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 051CCC06173B for ; Mon, 31 Jan 2022 00:14:34 -0800 (PST) Received: by mail-wr1-x433.google.com with SMTP id c23so23717042wrb.5 for ; Mon, 31 Jan 2022 00:14:33 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20210112.gappssmtp.com; s=20210112; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=lg5fXn15IhK+/P0Jol3gdVtWDSJ61JNmTIm53AdAK/k=; b=4LxFmTLwWkrOWwgG1Y6ntsgZWZwAOZTmupyqDvK4IPgpb+py5MNhN7pxL/KokMrVlf kSGOvWlXBPtemE5HkeffCYS2Re5PppgXXfzQsk48zslbf8SQlIh63Rf3QsqpxJikrhYL o1dt/XgbQXVZzEgcdU7izGgVECLtiG9oEeYCP4C8sCjnfl25RxNbMjSwlJu6JJAex5G3 Nuj+0VTcBeFR9rjGAD2hxN6RDm3oW18F+sY4Ek0mFp9O5yU1el875WBsr4D60j8UJjqu WUlY4uiH48Y5V2bbTOKUWtik7XEGqcpzhAB/1JNp9KNQh9g9lX3wdTScYLd5DPCpAvuX kkTA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=lg5fXn15IhK+/P0Jol3gdVtWDSJ61JNmTIm53AdAK/k=; b=xQfaOe1Y36WJgwhEN6Gb6mz8PF0fNnsf2f39iqzUE1hYjzjUr952zKWbVmfwAD8yMZ HHClpVtWsuDGhg/yVeGEWynN1lqNARX3wuF/FARNbfrNAl+iMyxnAvrGpeFUaVVeswI2 jv75TSL0CzlbbRULZH2xFanT5Kt+3Y5q5g/4GZEJC0xzCJ0/9sLJ5HDroCHNdvTNSEIb rOp01bpNQwE3YYG6ZhCDlCrEykIGyH7dil5flvpp+t2AC/v7LzQ0BqeUJ47XkTEAYO0d TgUPmYr3ANrGSKEYqRZgQddeKQGLJontP2TQG2c48ci6U9kK2Sa9aVlDqT6D33PNEgDK hdrg== X-Gm-Message-State: AOAM530YfmKrbYvjkG0MpNpTiMrkPFGSyaaLTTIXjjBGjmSxwA5wy+Bn kvIllFuTYhDmk62Asbq99utDqg== X-Google-Smtp-Source: ABdhPJy9awOmH+YltRFzK9gvP9YhaiAtrC/K76tTgNaBKxk8RftIMPMtOdnzdf/b9O2MQozbECO7tA== X-Received: by 2002:a5d:4888:: with SMTP id g8mr16219617wrq.65.1643616872530; Mon, 31 Jan 2022 00:14:32 -0800 (PST) Received: from localhost.localdomain (laubervilliers-658-1-213-31.w90-63.abo.wanadoo.fr. [90.63.244.31]) by smtp.googlemail.com with ESMTPSA id n11sm9959600wms.3.2022.01.31.00.14.31 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 31 Jan 2022 00:14:32 -0800 (PST) From: Corentin Labbe To: damien.lemoal@opensource.wdc.com, robh+dt@kernel.org Cc: devicetree@vger.kernel.org, linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org, Corentin Labbe , Linus Walleij Subject: [PATCH v2] dt-bindings: convert ata/cortina,gemini-sata-bridge to yaml Date: Mon, 31 Jan 2022 08:14:27 +0000 Message-Id: <20220131081427.1780897-1-clabbe@baylibre.com> X-Mailer: git-send-email 2.25.1 MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch converts ata/cortina,gemini-sata-bridge binding to yaml Reviewed-by: Linus Walleij Acked-by: Damien Le Moal Signed-off-by: Corentin Labbe --- Change since v1: - fixed cosmetic nits reported by Damien Le Moal .../ata/cortina,gemini-sata-bridge.txt | 55 ----------- .../ata/cortina,gemini-sata-bridge.yaml | 99 +++++++++++++++++++ 2 files changed, 99 insertions(+), 55 deletions(-) delete mode 100644 Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt create mode 100644 Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt deleted file mode 100644 index 1c3d3cc70051..000000000000 --- a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt +++ /dev/null @@ -1,55 +0,0 @@ -* Cortina Systems Gemini SATA Bridge - -The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that -takes two Faraday Technology FTIDE010 PATA controllers and bridges -them in different configurations to two SATA ports. - -Required properties: -- compatible: should be - "cortina,gemini-sata-bridge" -- reg: registers and size for the block -- resets: phandles to the reset lines for both SATA bridges -- reset-names: must be "sata0", "sata1" -- clocks: phandles to the compulsory peripheral clocks -- clock-names: must be "SATA0_PCLK", "SATA1_PCLK" -- syscon: a phandle to the global Gemini system controller -- cortina,gemini-ata-muxmode: tell the desired multiplexing mode for - the ATA controller and SATA bridges. Values 0..3: - Mode 0: ata0 master <-> sata0 - ata1 master <-> sata1 - ata0 slave interface brought out on IDE pads - Mode 1: ata0 master <-> sata0 - ata1 master <-> sata1 - ata1 slave interface brought out on IDE pads - Mode 2: ata1 master <-> sata1 - ata1 slave <-> sata0 - ata0 master and slave interfaces brought out - on IDE pads - Mode 3: ata0 master <-> sata0 - ata0 slave <-> sata1 - ata1 master and slave interfaces brought out - on IDE pads - -Optional boolean properties: -- cortina,gemini-enable-ide-pins: enables the PATA to IDE connection. - The muxmode setting decides whether ATA0 or ATA1 is brought out, - and whether master, slave or both interfaces get brought out. -- cortina,gemini-enable-sata-bridge: enables the PATA to SATA bridge - inside the Gemnini SoC. The Muxmode decides what PATA blocks will - be muxed out and how. - -Example: - -sata: sata@46000000 { - compatible = "cortina,gemini-sata-bridge"; - reg = <0x46000000 0x100>; - resets = <&rcon 26>, <&rcon 27>; - reset-names = "sata0", "sata1"; - clocks = <&gcc GEMINI_CLK_GATE_SATA0>, - <&gcc GEMINI_CLK_GATE_SATA1>; - clock-names = "SATA0_PCLK", "SATA1_PCLK"; - syscon = <&syscon>; - cortina,gemini-ata-muxmode = <3>; - cortina,gemini-enable-ide-pins; - cortina,gemini-enable-sata-bridge; -}; diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml new file mode 100644 index 000000000000..59ccbc83361c --- /dev/null +++ b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/cortina,gemini-sata-bridge.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cortina Systems Gemini SATA Bridge + +maintainers: + - Linus Walleij + +description: | + The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that + takes two Faraday Technology FTIDE010 PATA controllers and bridges + them in different configurations to two SATA ports. + +properties: + compatible: + const: "cortina,gemini-sata-bridge" + reg: + minItems: 1 + resets: + minItems: 2 + description: phandles to the reset lines for both SATA bridges + reset-names: + items: + - const: "sata0" + - const: "sata1" + clocks: + minItems: 2 + description: phandles to the compulsory peripheral clocks + clock-names: + items: + - const: "SATA0_PCLK" + - const: "SATA1_PCLK" + syscon: + minItems: 1 + $ref: /schemas/types.yaml#/definitions/phandle + description: a phandle to the global Gemini system controller + cortina,gemini-ata-muxmode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 + - 1 + - 2 + - 3 + description: | + Tell the desired multiplexing mode for the ATA controller and SATA bridges. Values 0..3: + Mode 0: ata0 master <-> sata0 + ata1 master <-> sata1 + ata0 slave interface brought out on IDE pads + Mode 1: ata0 master <-> sata0 + ata1 master <-> sata1 + ata1 slave interface brought out on IDE pads + Mode 2: ata1 master <-> sata1 + ata1 slave <-> sata0 + ata0 master and slave interfaces brought out on IDE pads + Mode 3: ata0 master <-> sata0 + ata0 slave <-> sata1 + ata1 master and slave interfaces brought out on IDE pads + + cortina,gemini-enable-ide-pins: + type: boolean + description: Enables the PATA to IDE connection. + The muxmode setting decides whether ATA0 or ATA1 is brought out, + and whether master, slave or both interfaces get brought out. + cortina,gemini-enable-sata-bridge: + type: boolean + description: Enables the PATA to SATA bridge inside the Gemnini SoC. + The Muxmode decides what PATA blocks will be muxed out and how. + +required: + - clocks + - clock-names + - cortina,gemini-ata-muxmode + - resets + - reset-names + - compatible + - reg + - syscon + +additionalProperties: false + +examples: + - | + #include + sata: sata@46000000 { + compatible = "cortina,gemini-sata-bridge"; + reg = <0x46000000 0x100>; + resets = <&rcon 26>, <&rcon 27>; + reset-names = "sata0", "sata1"; + clocks = <&gcc GEMINI_CLK_GATE_SATA0>, + <&gcc GEMINI_CLK_GATE_SATA1>; + clock-names = "SATA0_PCLK", "SATA1_PCLK"; + syscon = <&syscon>; + cortina,gemini-ata-muxmode = <3>; + cortina,gemini-enable-ide-pins; + cortina,gemini-enable-sata-bridge; + }; -- 2.34.1