From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 02C96C43219 for ; Sun, 6 Feb 2022 13:58:32 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S241050AbiBFN6a (ORCPT ); Sun, 6 Feb 2022 08:58:30 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51510 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S241026AbiBFN6W (ORCPT ); Sun, 6 Feb 2022 08:58:22 -0500 Received: from hostingweb31-40.netsons.net (hostingweb31-40.netsons.net [89.40.174.40]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 580B2C043187; Sun, 6 Feb 2022 05:58:18 -0800 (PST) Received: from [77.244.183.192] (port=63680 helo=melee.fritz.box) by hostingweb31.netsons.net with esmtpa (Exim 4.94.2) (envelope-from ) id 1nGgDO-00059v-0I; Sun, 06 Feb 2022 13:00:22 +0100 From: Luca Ceresoli To: linux-media@vger.kernel.org, linux-i2c@vger.kernel.org Cc: Luca Ceresoli , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Rob Herring , Mark Rutland , Wolfram Sang , Sakari Ailus , Hans Verkuil , Laurent Pinchart , Kieran Bingham , Jacopo Mondi , Vladimir Zapolskiy , Peter Rosin , Mauro Carvalho Chehab , Tomi Valkeinen , matti.vaittinen@fi.rohmeurope.com Subject: [RFCv3 5/6] media: ds90ub954: new driver for TI DS90UB954-Q1 video deserializer Date: Sun, 6 Feb 2022 12:59:38 +0100 Message-Id: <20220206115939.3091265-6-luca@lucaceresoli.net> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20220206115939.3091265-1-luca@lucaceresoli.net> References: <20220206115939.3091265-1-luca@lucaceresoli.net> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - hostingweb31.netsons.net X-AntiAbuse: Original Domain - vger.kernel.org X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - lucaceresoli.net X-Get-Message-Sender-Via: hostingweb31.netsons.net: authenticated_id: luca+lucaceresoli.net/only user confirmed/virtual account not confirmed X-Authenticated-Sender: hostingweb31.netsons.net: luca@lucaceresoli.net X-Source: X-Source-Args: X-Source-Dir: Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add a driver for the TI DS90UB954-Q1, a MIPI CSI-2 video deserializer that forwards video streams from up to two FPD-Link 3 connections to a MIPI CSI-2 output. It also allows access to remote I2C and GPIO. Signed-off-by: Luca Ceresoli --- Changes RFCv2 -> RFCv3: - update to new internal I2C APIs: err_new_secondary_device -> err_new_ancillary_device i2c_new_device -> i2c_new_client_device - update to new internal V4L2 APIs (get_fmt) - handle link parity errors and fix IRQ flood - add debug messages while parsing ports - drop code related to 2nd rx port, we support one port only - keep the serializer always instantiated - add link to serializer under each rx port sysfs dir - implement clocks using common clock framework, expose the FPD line rate as a clock - allocate CSI tx port dynamically (coherently with FPD RX ports, useful for future ds90ub960 support) - make lock/unlock dectection more robust - new DT layout: add remote-chips for serializer description - instantiate a remote GPIO controller per each port - improve logging and error reporting - switch to link-frequencies, compute best speed select based on REFCLK - fix kernel-doc syntax errors - misc improvements Changes RFCv1 -> RFCv2: - i2c - add one i2c client per FPD-link RX port; this avoids the need to select ports before accessing the paged registers, and the locking that goes with it - don't use regmap: we have many clients now, having a regmap each was more burden than usefulness here as we use very few regmap features - switch from i2c-mux to i2c-atr, where the ATR functionality is now - add remote I2C adapters during probe, not when linked (simplifies a lot) - v4l2 - v4l2: implement start/stop stream (!) - v4l2: remove unimplemented functions - device tree - get the remote serializer alias from DT, or fallback to a default - ditch the 'rxports' DT node, init rxports from 'ports' - get node to the remote chip from DT - get REFCLK from DT and expose it to the remote serializer - add remote GPIO support in the form of a gpiochip for each rxport to control GPIOs on the remote chip (input only for now) - enable IRQ (but keep polling loop as fallback) - add minimal CSI TX port management (DT + enable) - sysfs: notify 'locked' change (for poll(2) usage) - add test pattern generation - add some documentation - make log messages more uniform - many, many, many minor changes, fixes and cleanups LIMITATIONS / TODO: - Implementation of V4L2 features is minimal; works in 1920x1080 YUV422 only - Tested only with one of the two inputs at a time; no Virtual Channel ID mapping (routing) implemented - Do we really need ds90->alias_table_lock to protect the ATR table? Or are attach operations serialized? - The 'status' sysfs file is not sysfs compliant (contains multiple values). It was initially used to test the code and it should be rewritten differently. - Well tested on real hardware, but only on a 4.14 kernel --- MAINTAINERS | 1 + drivers/media/i2c/Kconfig | 12 + drivers/media/i2c/Makefile | 2 + drivers/media/i2c/ds90ub954.c | 1648 +++++++++++++++++++++++++++++++++ 4 files changed, 1663 insertions(+) create mode 100644 drivers/media/i2c/ds90ub954.c diff --git a/MAINTAINERS b/MAINTAINERS index f0156062f788..5aeb557ab5da 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19102,6 +19102,7 @@ M: Luca Ceresoli L: linux-media@vger.kernel.org S: Maintained F: Documentation/devicetree/bindings/media/i2c/ti,ds90ub954-q1.yaml +F: drivers/media/i2c/ds90ub954.c TEXAS INSTRUMENTS' SYSTEM CONTROL INTERFACE (TISCI) PROTOCOL DRIVER M: Nishanth Menon diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 69c56e24a612..9a02444bd647 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -480,6 +480,18 @@ config VIDEO_MAX9286 To compile this driver as a module, choose M here: the module will be called max9286. +config VIDEO_DS90UB954 + tristate "TI DS90UB954-Q1 deserializer" + depends on OF_GPIO + select I2C_ATR + help + Device driver for the Texas Instruments "DS90UB954-Q1 Dual + 4.16 Gbps FPD-Link III Deserializer Hub With MIPI CSI-2 + Outputs for 2MP/60fps Cameras and RADAR". + + To compile this driver as a module, choose M here: the + module will be called ds90ub954. + comment "Video and audio decoders" config VIDEO_SAA717X diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index b01f6cd05ee8..84e9ad00236a 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -135,5 +135,7 @@ obj-$(CONFIG_VIDEO_MAX9286) += max9286.o obj-$(CONFIG_VIDEO_MAX9271_LIB) += max9271.o obj-$(CONFIG_VIDEO_RDACM20) += rdacm20.o obj-$(CONFIG_VIDEO_RDACM21) += rdacm21.o +obj-$(CONFIG_VIDEO_DS90UB954) += ds90ub954.o obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o + obj-$(CONFIG_SDR_MAX2175) += max2175.o diff --git a/drivers/media/i2c/ds90ub954.c b/drivers/media/i2c/ds90ub954.c new file mode 100644 index 000000000000..649480b8861c --- /dev/null +++ b/drivers/media/i2c/ds90ub954.c @@ -0,0 +1,1648 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * Driver for the Texas Instruments DS90UB954-Q1 video deserializer + * + * Copyright (c) 2019 Luca Ceresoli + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* TODO add support for 2nd FPD-link RX port */ +#define DS90_FPD_RX_NPORTS 1 /* Physical FPD-link RX ports */ +#define DS90_CSI_TX_NPORTS 1 /* Physical CSI-2 TX ports */ +#define DS90_NPORTS (DS90_FPD_RX_NPORTS + DS90_CSI_TX_NPORTS) + +#define DS90_NUM_GPIOS 7 /* Physical GPIO pins */ +#define DS90_NUM_BC_GPIOS 4 /* Max GPIOs on Back Channel */ + +#define DS90_NUM_SLAVE_ALIASES 8 +#define DS90_MAX_POOL_ALIASES (DS90_FPD_RX_NPORTS * DS90_NUM_SLAVE_ALIASES) + +/* + * Register map + * + * 0x00-0x32 Shared + * 0x33-0x3A CSI-2 TX (per-port paged on DS90UB960, shared on 954) + * 0x4C Shared + * 0x4D-0x7F FPD-Link RX, per-port paged + * 0xB0-0xBF Shared + * 0xD0-0xDF FPD-Link RX, per-port paged + * 0xF0-0xF5 Shared + * 0xF8-0xFB Shared + * All others Reserved + * + * Register defines prefixes: + * DS90_SR_* = Shared register + * DS90_RR_* = FPD-Link RX, per-port paged register + * DS90_TR_* = CSI-2 TX, per-port paged register + * DS90_XR_* = Reserved register + * DS90_IR_* = Indirect register + */ + +#define DS90_SR_I2C_DEV_ID 0x00 +#define DS90_SR_RESET 0x01 +#define DS90_SR_GEN_CONFIG 0x02 +#define DS90_SR_REV_MASK 0x03 +#define DS90_SR_DEVICE_STS 0x04 +#define DS90_SR_PAR_ERR_THOLD_HI 0x05 +#define DS90_SR_PAR_ERR_THOLD_LO 0x06 +#define DS90_SR_BCC_WDOG_CTL 0x07 +#define DS90_SR_I2C_CTL1 0x08 +#define DS90_SR_I2C_CTL2 0x09 +#define DS90_SR_SCL_HIGH_TIME 0x0A +#define DS90_SR_SCL_LOW_TIME 0x0B +#define DS90_SR_RX_PORT_CTL 0x0C +#define DS90_SR_IO_CTL 0x0D +#define DS90_SR_GPIO_PIN_STS 0x0E +#define DS90_SR_GPIO_INPUT_CTL 0x0F +#define DS90_SR_GPIO_PIN_CTL(n) (0x10 + (n)) /* n < DS90_NUM_GPIOS */ +#define DS90_SR_FS_CTL 0x18 +#define DS90_SR_FS_HIGH_TIME_1 0x19 +#define DS90_SR_FS_HIGH_TIME_0 0x1A +#define DS90_SR_FS_LOW_TIME_1 0x1B +#define DS90_SR_FS_LOW_TIME_0 0x1C +#define DS90_SR_MAX_FRM_HI 0x1D +#define DS90_SR_MAX_FRM_LO 0x1E +#define DS90_SR_CSI_PLL_CTL 0x1F + +#define DS90_SR_FWD_CTL1 0x20 +#define DS90_SR_FWD_CTL1_PORT_DIS(n) BIT((n)+4) + +#define DS90_SR_FWD_CTL2 0x21 +#define DS90_SR_FWD_STS 0x22 + +#define DS90_SR_INTERRUPT_CTL 0x23 +#define DS90_SR_INTERRUPT_CTL_INT_EN BIT(7) +#define DS90_SR_INTERRUPT_CTL_IE_CSI_TX0 BIT(4) +#define DS90_SR_INTERRUPT_CTL_IE_RX(n) BIT((n)) /* rxport[n] IRQ */ +#define DS90_SR_INTERRUPT_CTL_ALL 0x83 // TODO 0x93 to enable CSI + +#define DS90_SR_INTERRUPT_STS 0x24 +#define DS90_SR_INTERRUPT_STS_INT BIT(7) +#define DS90_SR_INTERRUPT_STS_IS_CSI_TX0 BIT(4) +#define DS90_SR_INTERRUPT_STS_IS_RX(n) BIT((n)) /* rxport[n] IRQ */ + +#define DS90_SR_TS_CONFIG 0x25 +#define DS90_SR_TS_CONTROL 0x26 +#define DS90_SR_TS_LINE_HI 0x27 +#define DS90_SR_TS_LINE_LO 0x28 +#define DS90_SR_TS_STATUS 0x29 +#define DS90_SR_TIMESTAMP_P0_HI 0x2A +#define DS90_SR_TIMESTAMP_P0_LO 0x2B +#define DS90_SR_TIMESTAMP_P1_HI 0x2C +#define DS90_SR_TIMESTAMP_P1_LO 0x2D + +#define DS90_TR_CSI_CTL 0x33 +#define DS90_TR_CSI_CTL_CSI_CAL_EN BIT(6) +#define DS90_TR_CSI_CTL_CSI_ENABLE BIT(0) + +#define DS90_TR_CSI_CTL2 0x34 +#define DS90_TR_CSI_STS 0x35 +#define DS90_TR_CSI_TX_ICR 0x36 + +#define DS90_TR_CSI_TX_ISR 0x37 +#define DS90_TR_CSI_TX_ISR_IS_CSI_SYNC_ERROR BIT(3) +#define DS90_TR_CSI_TX_ISR_IS_CSI_PASS_ERROR BIT(1) + +#define DS90_TR_CSI_TEST_CTL 0x38 +#define DS90_TR_CSI_TEST_PATT_HI 0x39 +#define DS90_TR_CSI_TEST_PATT_LO 0x3A + +#define DS90_XR_AEQ_CTL1 0x42 +#define DS90_XR_AEQ_ERR_THOLD 0x43 +#define DS90_XR_FPD3_CAP 0x4A +#define DS90_XR_RAW_EMBED_DTYPE 0x4B + +#define DS90_SR_FPD3_PORT_SEL 0x4C + +#define DS90_RR_RX_PORT_STS1 0x4D +#define DS90_RR_RX_PORT_STS1_BCC_CRC_ERROR BIT(5) +#define DS90_RR_RX_PORT_STS1_LOCK_STS_CHG BIT(4) +#define DS90_RR_RX_PORT_STS1_BCC_SEQ_ERROR BIT(3) +#define DS90_RR_RX_PORT_STS1_PARITY_ERROR BIT(2) +#define DS90_RR_RX_PORT_STS1_PORT_PASS BIT(1) +#define DS90_RR_RX_PORT_STS1_LOCK_STS BIT(0) + +#define DS90_RR_RX_PORT_STS2 0x4E +#define DS90_RR_RX_PORT_STS2_LINE_LEN_UNSTABLE BIT(7) +#define DS90_RR_RX_PORT_STS2_LINE_LEN_CHG BIT(6) +#define DS90_RR_RX_PORT_STS2_FPD3_ENCODE_ERROR BIT(5) +#define DS90_RR_RX_PORT_STS2_BUFFER_ERROR BIT(4) +#define DS90_RR_RX_PORT_STS2_CSI_ERROR BIT(3) +#define DS90_RR_RX_PORT_STS2_FREQ_STABLE BIT(2) +#define DS90_RR_RX_PORT_STS2_CABLE_FAULT BIT(1) +#define DS90_RR_RX_PORT_STS2_LINE_CNT_CHG BIT(0) + +#define DS90_RR_RX_FREQ_HIGH 0x4F +#define DS90_RR_RX_FREQ_LOW 0x50 +#define DS90_RR_SENSOR_STS_0 0x51 +#define DS90_RR_SENSOR_STS_1 0x52 +#define DS90_RR_SENSOR_STS_2 0x53 +#define DS90_RR_SENSOR_STS_3 0x54 +#define DS90_RR_RX_PAR_ERR_HI 0x55 +#define DS90_RR_RX_PAR_ERR_LO 0x56 +#define DS90_RR_BIST_ERR_COUNT 0x57 + +#define DS90_RR_BCC_CONFIG 0x58 +#define DS90_RR_BCC_CONFIG_I2C_PASS_THROUGH BIT(6) + +#define DS90_RR_DATAPATH_CTL1 0x59 +#define DS90_RR_DATAPATH_CTL2 0x5A +#define DS90_RR_SER_ID 0x5B +#define DS90_RR_SER_ALIAS_ID 0x5C + +/* For these two register sets: n < DS90_NUM_SLAVE_ALIASES */ +#define DS90_RR_SLAVE_ID(n) (0x5D + (n)) +#define DS90_RR_SLAVE_ALIAS(n) (0x65 + (n)) + +#define DS90_RR_PORT_CONFIG 0x6D +#define DS90_RR_BC_GPIO_CTL(n) (0x6E + (n)) /* n < 2 */ +#define DS90_RR_RAW10_ID 0x70 +#define DS90_RR_RAW12_ID 0x71 +#define DS90_RR_CSI_VC_MAP 0x72 +#define DS90_RR_LINE_COUNT_HI 0x73 +#define DS90_RR_LINE_COUNT_LO 0x74 +#define DS90_RR_LINE_LEN_1 0x75 +#define DS90_RR_LINE_LEN_0 0x76 +#define DS90_RR_FREQ_DET_CTL 0x77 +#define DS90_RR_MAILBOX_1 0x78 +#define DS90_RR_MAILBOX_2 0x79 + +#define DS90_RR_CSI_RX_STS 0x7A +#define DS90_RR_CSI_RX_STS_LENGTH_ERR BIT(3) +#define DS90_RR_CSI_RX_STS_CKSUM_ERR BIT(2) +#define DS90_RR_CSI_RX_STS_ECC2_ERR BIT(1) +#define DS90_RR_CSI_RX_STS_ECC1_ERR BIT(0) + +#define DS90_RR_CSI_ERR_COUNTER 0x7B +#define DS90_RR_PORT_CONFIG2 0x7C +#define DS90_RR_PORT_PASS_CTL 0x7D +#define DS90_RR_SEN_INT_RISE_CTL 0x7E +#define DS90_RR_SEN_INT_FALL_CTL 0x7F + +#define DS90_XR_REFCLK_FREQ 0xA5 + +#define DS90_SR_IND_ACC_CTL 0xB0 +#define DS90_SR_IND_ACC_CTL_IA_AUTO_INC BIT(1) + +#define DS90_SR_IND_ACC_ADDR 0xB1 +#define DS90_SR_IND_ACC_DATA 0xB2 +#define DS90_SR_BIST_CONTROL 0xB3 +#define DS90_SR_MODE_IDX_STS 0xB8 +#define DS90_SR_LINK_ERROR_COUNT 0xB9 +#define DS90_SR_FPD3_ENC_CTL 0xBA +#define DS90_SR_FV_MIN_TIME 0xBC +#define DS90_SR_GPIO_PD_CTL 0xBE + +#define DS90_RR_PORT_DEBUG 0xD0 +#define DS90_RR_AEQ_CTL2 0xD2 +#define DS90_RR_AEQ_STATUS 0xD3 +#define DS90_RR_AEQ_BYPASS 0xD4 +#define DS90_RR_AEQ_MIN_MAX 0xD5 +#define DS90_RR_PORT_ICR_HI 0xD8 +#define DS90_RR_PORT_ICR_LO 0xD9 +#define DS90_RR_PORT_ISR_HI 0xDA +#define DS90_RR_PORT_ISR_LO 0xDB +#define DS90_RR_FC_GPIO_STS 0xDC +#define DS90_RR_FC_GPIO_ICR 0xDD +#define DS90_RR_SEN_INT_RISE_STS 0xDE +#define DS90_RR_SEN_INT_FALL_STS 0xDF + +#define DS90_SR_FPD3_RX_ID0 0xF0 +#define DS90_SR_FPD3_RX_ID1 0xF1 +#define DS90_SR_FPD3_RX_ID2 0xF2 +#define DS90_SR_FPD3_RX_ID3 0xF3 +#define DS90_SR_FPD3_RX_ID4 0xF4 +#define DS90_SR_FPD3_RX_ID5 0xF5 +#define DS90_SR_I2C_RX_ID(n) (0xF8 + (n)) /* < DS90_FPD_RX_NPORTS */ + +/* DS90_IR_PGEN_*: Indirect Registers for Test Pattern Generator */ + +#define DS90_IR_PGEN_CTL 0x01 +#define DS90_IR_PGEN_CTL_PGEN_ENABLE BIT(0) + +#define DS90_IR_PGEN_CFG 0x02 +#define DS90_IR_PGEN_CSI_DI 0x03 +#define DS90_IR_PGEN_LINE_SIZE1 0x04 +#define DS90_IR_PGEN_LINE_SIZE0 0x05 +#define DS90_IR_PGEN_BAR_SIZE1 0x06 +#define DS90_IR_PGEN_BAR_SIZE0 0x07 +#define DS90_IR_PGEN_ACT_LPF1 0x08 +#define DS90_IR_PGEN_ACT_LPF0 0x09 +#define DS90_IR_PGEN_TOT_LPF1 0x0A +#define DS90_IR_PGEN_TOT_LPF0 0x0B +#define DS90_IR_PGEN_LINE_PD1 0x0C +#define DS90_IR_PGEN_LINE_PD0 0x0D +#define DS90_IR_PGEN_VBP 0x0E +#define DS90_IR_PGEN_VFP 0x0F +#define DS90_IRT_PGEN_COLOR(n) (0x10 + (n)) /* n < 15 */ + +/** + * struct ds90_rxport_info - Info for instantiating rxports from device tree + * @local_name: DT name of the RX port + * @remote_name: DT name of the remote serializer + * @local_def_alias: Fallback I2C alias for the RX port if not found in DT + * @remote_def_alias: Fallback I2C alias for the remote deserializer if not + * found in DT + */ +struct ds90_rxport_info { + const char *local_name; + const char *remote_name; + u8 local_def_alias; + u8 remote_def_alias; +}; + +struct ds90_rxport { + /* Errors and anomalies counters */ + u64 bcc_crc_error_count; + u64 bcc_seq_error_count; + u64 line_len_unstable_count; + u64 line_len_chg_count; + u64 fpd3_encode_error_count; + u64 buffer_error_count; + u64 line_cnt_chg_count; + u64 csi_rx_sts_length_err_count; + u64 csi_rx_sts_cksum_err_count; + u64 csi_rx_sts_ecc2_err_count; + u64 csi_rx_sts_ecc1_err_count; + u64 fpd3_parity_errors; + + struct i2c_client *reg_client; /* for per-port local registers */ + struct i2c_client *ser_client; /* remote serializer */ + unsigned short ser_alias; /* ser i2c alias (lower 7 bits) */ + bool locked; + + struct gpio_chip gpio_chip; + char gpio_chip_name[64]; + + struct ds90_data *ds90; + unsigned short nport; /* RX port number, and index in ds90->rxport[] */ +}; + +struct ds90_csitxport { + unsigned int speed_select; /* CSI_TX_SPEED */ +}; + +struct ds90_data { + struct i2c_client *client; /* for shared local registers */ + struct gpio_desc *reset_gpio; + struct task_struct *kthread; + struct i2c_atr *atr; + struct ds90_rxport *rxport[DS90_FPD_RX_NPORTS]; + struct ds90_csitxport *csitxport[DS90_CSI_TX_NPORTS]; + + struct v4l2_subdev sd; + struct media_pad pads[DS90_NPORTS]; + struct v4l2_mbus_framefmt fmt[DS90_NPORTS]; + struct v4l2_ctrl_handler ctrl_handler; + + struct clk *refclk; + struct clk_hw *line_clk_hw; + + /* Address Translator alias-to-slave map table */ + size_t atr_alias_num; /* Number of aliases configured */ + u16 atr_alias_id[DS90_MAX_POOL_ALIASES]; /* 0 = no alias */ + u16 atr_slave_id[DS90_MAX_POOL_ALIASES]; /* 0 = not in use */ + struct mutex alias_table_lock; +}; + +#define sd_to_ds90(_sd) container_of(_sd, struct ds90_data, sd) + +enum { + TEST_PATTERN_DISABLED = 0, + TEST_PATTERN_V_COLOR_BARS_1, + TEST_PATTERN_V_COLOR_BARS_2, + TEST_PATTERN_V_COLOR_BARS_4, + TEST_PATTERN_V_COLOR_BARS_8, +}; + +static const char * const ds90_tpg_qmenu[] = { + "Disabled", + "1 vertical color bar", + "2 vertical color bars", + "4 vertical color bars", + "8 vertical color bars", +}; + +/* ----------------------------------------------------------------------------- + * Basic device access + */ + +static int ds90_read(const struct ds90_data *ds90, + const struct i2c_client *client, + u8 reg, u8 *val) +{ + int ret = i2c_smbus_read_byte_data(client, reg); + + if (ret < 0) { + dev_err(&ds90->client->dev, + "%s[0x%02x]: cannot read register 0x%02x (%d)!\n", + __func__, client->addr, reg, ret); + } else { + *val = ret; + ret = 0; + } + + return ret; +} + +static int ds90_read_shared(const struct ds90_data *ds90, u8 reg, u8 *val) +{ + return ds90_read(ds90, ds90->client, reg, val); +} + +static int ds90_read_rxport(const struct ds90_data *ds90, int nport, + u8 reg, u8 *val) +{ + return ds90_read(ds90, ds90->rxport[nport]->reg_client, reg, val); +} + +static int ds90_write(const struct ds90_data *ds90, + const struct i2c_client *client, + u8 reg, u8 val) +{ + int ret = i2c_smbus_write_byte_data(client, reg, val); + + if (ret < 0) + dev_err(&ds90->client->dev, + "%s[0x%02x]: cannot write register 0x%02x (%d)!\n", + __func__, client->addr, reg, ret); + else + ret = 0; + + return ret; +} + +static int ds90_write_shared(const struct ds90_data *ds90, u8 reg, u8 val) +{ + return ds90_write(ds90, ds90->client, reg, val); +} + +static int ds90_write_rxport(const struct ds90_data *ds90, int nport, + u8 reg, u8 val) +{ + return ds90_write(ds90, ds90->rxport[nport]->reg_client, reg, val); +} + +static int ds90_write_ind8(const struct ds90_data *ds90, u8 reg, u8 val) +{ + int err; + + err = ds90_write_shared(ds90, DS90_SR_IND_ACC_ADDR, reg); + if (!err) + err = ds90_write_shared(ds90, DS90_SR_IND_ACC_DATA, val); + return err; +} + +/* Assumes IA_AUTO_INC is set in DS90_SR_IND_ACC_CTL */ +static int ds90_write_ind16(const struct ds90_data *ds90, u8 reg, u16 val) +{ + int err; + + err = ds90_write_shared(ds90, DS90_SR_IND_ACC_ADDR, reg); + if (!err) + err = ds90_write_shared(ds90, DS90_SR_IND_ACC_DATA, val >> 8); + if (!err) + err = ds90_write_shared(ds90, DS90_SR_IND_ACC_DATA, val & 0xff); + return err; +} + +static int ds90_update_bits(const struct ds90_data *ds90, + const struct i2c_client *client, + u8 reg, u8 mask, u8 val) +{ + int ret = i2c_smbus_read_byte_data(client, reg); + + if (ret < 0) { + dev_err(&ds90->client->dev, + "%s[0x%02x]: cannot read register 0x%02x (%d)!\n", + __func__, client->addr, reg, ret); + return ret; + } + + ret = i2c_smbus_write_byte_data(client, reg, + (ret & ~mask) | (val & mask)); + if (ret < 0) { + dev_err(&ds90->client->dev, + "%s[0x%02x]: cannot write register 0x%02x (%d)!\n", + __func__, client->addr, reg, ret); + return ret; + } + + return 0; +} + +static int ds90_update_bits_shared(const struct ds90_data *ds90, + u8 reg, u8 mask, u8 val) +{ + return ds90_update_bits(ds90, ds90->client, + reg, mask, val); +} + +static int ds90_update_bits_rxport(const struct ds90_data *ds90, int nport, + u8 reg, u8 mask, u8 val) +{ + return ds90_update_bits(ds90, ds90->rxport[nport]->reg_client, + reg, mask, val); +} + +static void ds90_reset(const struct ds90_data *ds90, bool keep_reset) +{ + gpiod_set_value_cansleep(ds90->reset_gpio, 1); + usleep_range(3000, 6000); /* min 2 ms */ + + if (!keep_reset) { + gpiod_set_value_cansleep(ds90->reset_gpio, 0); + usleep_range(2000, 4000); /* min 1 ms */ + } +} + +/* ----------------------------------------------------------------------------- + * I2C-ATR (address translator) + */ + +static int ds90_atr_attach_client(struct i2c_atr *atr, u32 chan_id, + const struct i2c_board_info *info, + const struct i2c_client *client, + u16 *alias_id) +{ + struct ds90_data *ds90 = i2c_atr_get_clientdata(atr); + struct ds90_rxport *rxport = ds90->rxport[chan_id]; + struct device *dev = &ds90->client->dev; + u16 alias = 0; + int reg_idx; + int pool_idx; + int err = 0; + + dev_dbg(dev, "rx%d: %s\n", chan_id, __func__); + + mutex_lock(&ds90->alias_table_lock); + + /* Find unused alias in table */ + + for (pool_idx = 0; pool_idx < ds90->atr_alias_num; pool_idx++) + if (ds90->atr_slave_id[pool_idx] == 0) + break; + + if (pool_idx == ds90->atr_alias_num) { + dev_warn(dev, "rx%d: alias pool exhausted\n", rxport->nport); + err = -EADDRNOTAVAIL; + goto out; + } + + alias = ds90->atr_alias_id[pool_idx]; + + /* Find first unused alias register */ + + for (reg_idx = 0; reg_idx < DS90_NUM_SLAVE_ALIASES; reg_idx++) { + u8 regval; + + err = ds90_read_rxport(ds90, chan_id, + DS90_RR_SLAVE_ALIAS(reg_idx), ®val); + if (!err && regval == 0) + break; + } + + if (reg_idx == DS90_NUM_SLAVE_ALIASES) { + dev_warn(dev, "rx%d: all aliases in use\n", rxport->nport); + err = -EADDRNOTAVAIL; + goto out; + } + + /* Map alias to slave */ + + ds90_write_rxport(ds90, chan_id, + DS90_RR_SLAVE_ID(reg_idx), client->addr << 1); + ds90_write_rxport(ds90, chan_id, + DS90_RR_SLAVE_ALIAS(reg_idx), alias << 1); + + ds90->atr_slave_id[pool_idx] = client->addr; + + *alias_id = alias; /* tell the atr which alias we chose */ + + dev_info(dev, "rx%d: client 0x%02x mapped at alias 0x%02x (%s)\n", + rxport->nport, client->addr, alias, client->name); + +out: + mutex_unlock(&ds90->alias_table_lock); + return err; +} + +static void ds90_atr_detach_client(struct i2c_atr *atr, u32 chan_id, + const struct i2c_client *client) +{ + struct ds90_data *ds90 = i2c_atr_get_clientdata(atr); + struct ds90_rxport *rxport = ds90->rxport[chan_id]; + struct device *dev = &ds90->client->dev; + u16 alias = 0; + int reg_idx; + int pool_idx; + + mutex_lock(&ds90->alias_table_lock); + + /* Find alias mapped to this client */ + + for (pool_idx = 0; pool_idx < ds90->atr_alias_num; pool_idx++) + if (ds90->atr_slave_id[pool_idx] == client->addr) + break; + + if (pool_idx == ds90->atr_alias_num) { + dev_err(dev, "rx%d: client 0x%02x is not mapped!\n", + rxport->nport, client->addr); + goto out; + } + + alias = ds90->atr_alias_id[pool_idx]; + + /* Find alias register used for this client */ + + for (reg_idx = 0; reg_idx < DS90_NUM_SLAVE_ALIASES; reg_idx++) { + u8 regval; + int err; + + err = ds90_read_rxport(ds90, chan_id, + DS90_RR_SLAVE_ALIAS(reg_idx), ®val); + if (!err && regval == (alias << 1)) + break; + } + + if (reg_idx == DS90_NUM_SLAVE_ALIASES) { + dev_err(dev, + "rx%d: cannot find alias 0x%02x reg (client 0x%02x)!\n", + rxport->nport, alias, client->addr); + goto out; + } + + /* Unmap */ + + ds90_write_rxport(ds90, chan_id, DS90_RR_SLAVE_ALIAS(reg_idx), 0); + ds90->atr_slave_id[pool_idx] = 0; + + dev_info(dev, "rx%d: client 0x%02x unmapped from alias 0x%02x (%s)\n", + rxport->nport, client->addr, alias, client->name); + +out: + mutex_unlock(&ds90->alias_table_lock); +} + +static const struct i2c_atr_ops ds90_atr_ops = { + .attach_client = ds90_atr_attach_client, + .detach_client = ds90_atr_detach_client, +}; + +/* ----------------------------------------------------------------------------- + * CSI ports + */ + +static int ds90_csiport_probe_one(struct ds90_data *ds90, + unsigned int nport, + struct device_node *np) +{ + struct device *dev = &ds90->client->dev; + struct ds90_csitxport *csitxport; + struct v4l2_fwnode_endpoint vep; + unsigned long f_parent = clk_get_rate(ds90->refclk); + unsigned long wanted_bpsl, actual_bpsl, mul; // bpsl = bit/second/lane + unsigned int speed_select; + int err; + + csitxport = devm_kzalloc(dev, sizeof(*csitxport), GFP_KERNEL); + if (!csitxport) + return -ENOMEM; + + err = v4l2_fwnode_endpoint_alloc_parse(of_fwnode_handle(np), &vep); + if (err) + return err; + + if (vep.nr_of_link_frequencies != 1) { + v4l2_fwnode_endpoint_free(&vep); + return dev_err_probe(dev, -EINVAL, + "OF: %pOF: missing or too many link-frequencies\n", np); + } + + /* CSI-2 is DDR */ + wanted_bpsl = vep.link_frequencies[0] * 2; + + // CSI-2 tx bps/lane = REFCLK * {16, 32 or 64} (see CSI_TX_SPEED in datasheet). + // Find the multiplier that gets the closest bps/lane. + mul = wanted_bpsl / f_parent; + if (mul < 24) { + mul = 16; + speed_select = 3; + } else if (mul < 48) { + mul = 32; + speed_select = 2; + } else { + mul = 64; + speed_select = 0; + } + + actual_bpsl = f_parent * mul; + + if (actual_bpsl != wanted_bpsl) + dev_warn(dev, "CSI-2 data rate: %lu bps/lane (wanted %lu)", + actual_bpsl, wanted_bpsl); + + csitxport->speed_select = speed_select; + ds90->csitxport[nport] = csitxport; + + v4l2_fwnode_endpoint_free(&vep); + + return 0; +} + +static void ds90_csi_handle_events(struct ds90_data *ds90) +{ + struct device *dev = &ds90->client->dev; + u8 csi_tx_isr; + int err; + + err = ds90_read_shared(ds90, DS90_TR_CSI_TX_ISR, &csi_tx_isr); + + if (!err) { + if (csi_tx_isr & DS90_TR_CSI_TX_ISR_IS_CSI_SYNC_ERROR) + dev_warn(dev, "CSI_SYNC_ERROR\n"); + + if (csi_tx_isr & DS90_TR_CSI_TX_ISR_IS_CSI_PASS_ERROR) + dev_warn(dev, "CSI_PASS_ERROR\n"); + } +} + +/* ----------------------------------------------------------------------------- + * GPIO CHIP: control GPIOs on the remote side + */ + +static int ds90_gpio_direction_out(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct ds90_rxport *rxport = gpiochip_get_data(chip); + int nport = rxport->nport; + + unsigned int reg_addr = DS90_RR_BC_GPIO_CTL(offset / 2); + unsigned int reg_shift = (offset % 2) * 4; + + ds90_update_bits_rxport(rxport->ds90, nport, reg_addr, + 0xf << reg_shift, + (0x8 + !!value) << reg_shift); + return 0; +} + +static void ds90_gpio_set(struct gpio_chip *chip, + unsigned int offset, int value) +{ + ds90_gpio_direction_out(chip, offset, value); +} + +static int ds90_gpiochip_probe(struct ds90_data *ds90, int nport, + struct device_node *rchip_np) +{ + struct ds90_rxport *rxport = ds90->rxport[nport]; + struct gpio_chip *gc = &rxport->gpio_chip; + struct device *dev = &ds90->client->dev; + int err; + + scnprintf(rxport->gpio_chip_name, sizeof(rxport->gpio_chip_name), + "%s:%d", dev_name(dev), nport); + + gc->label = rxport->gpio_chip_name; + gc->parent = dev; + gc->owner = THIS_MODULE; + gc->base = -1; + gc->can_sleep = 1; + gc->ngpio = DS90_NUM_BC_GPIOS; + gc->direction_output = ds90_gpio_direction_out; + gc->set = ds90_gpio_set; + gc->of_node = rchip_np; + gc->of_gpio_n_cells = 2; + + err = gpiochip_add_data(gc, rxport); + if (err) + return dev_err_probe(dev, err, "Failed adding gpiochip\n"); + + return 0; +} + +static void ds90_gpiochip_remove(struct ds90_data *ds90, int nport) +{ + struct gpio_chip *gc = &ds90->rxport[nport]->gpio_chip; + + gpiochip_remove(gc); +} + +/* ----------------------------------------------------------------------------- + * RX ports + */ + +static ssize_t locked_show(struct device *dev, + struct device_attribute *attr, + char *buf); +static ssize_t status_show(struct device *dev, + struct device_attribute *attr, + char *buf); + +static struct device_attribute dev_attr_locked[] = { + __ATTR_RO(locked), + __ATTR_RO(locked), +}; + +static struct device_attribute dev_attr_status[] = { + __ATTR_RO(status), + __ATTR_RO(status), +}; + +static struct attribute *ds90_rxport0_attrs[] = { + &dev_attr_locked[0].attr, + &dev_attr_status[0].attr, + NULL +}; + +static struct attribute *ds90_rxport1_attrs[] = { + &dev_attr_locked[1].attr, + &dev_attr_status[1].attr, + NULL +}; + +static ssize_t locked_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int nport = (attr - dev_attr_locked); + const struct ds90_data *ds90 = dev_get_drvdata(dev); + const struct ds90_rxport *rxport = ds90->rxport[nport]; + + return scnprintf(buf, PAGE_SIZE, "%d", rxport->locked); +} + +static ssize_t status_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int nport = (attr - dev_attr_status); + const struct ds90_data *ds90 = dev_get_drvdata(dev); + const struct ds90_rxport *rxport = ds90->rxport[nport]; + + return scnprintf(buf, PAGE_SIZE, + "bcc_crc_error_count = %llu\n" + "bcc_seq_error_count = %llu\n" + "line_len_unstable_count = %llu\n" + "line_len_chg_count = %llu\n" + "fpd3_encode_error_count = %llu\n" + "buffer_error_count = %llu\n" + "line_cnt_chg_count = %llu\n" + "csi_rx_sts_length_err_count = %llu\n" + "csi_rx_sts_cksum_err_count = %llu\n" + "csi_rx_sts_ecc2_err_count = %llu\n" + "csi_rx_sts_ecc1_err_count = %llu\n" + "fpd3_parity_errors = %llu\n", + rxport->bcc_crc_error_count, + rxport->bcc_seq_error_count, + rxport->line_len_unstable_count, + rxport->line_len_chg_count, + rxport->fpd3_encode_error_count, + rxport->buffer_error_count, + rxport->line_cnt_chg_count, + rxport->csi_rx_sts_length_err_count, + rxport->csi_rx_sts_cksum_err_count, + rxport->csi_rx_sts_ecc2_err_count, + rxport->csi_rx_sts_ecc1_err_count, + rxport->fpd3_parity_errors); +} + +struct attribute_group ds90_rxport_attr_group[] = { + { .name = "rx0", .attrs = ds90_rxport0_attrs }, + { .name = "rx1", .attrs = ds90_rxport1_attrs }, +}; + +/* + * Instantiate remote serializer. + * + * @note Must be called with ds90->alias_table_lock not held! The added i2c + * adapter will probe new slaves, which can request i2c transfers, ending + * up in calling ds90_atr_attach_client() where the lock is taken. + */ +static int ds90_rxport_add_serializer(struct ds90_data *ds90, int nport, + struct device_node *rchip_np) +{ + struct ds90_rxport *rxport = ds90->rxport[nport]; + struct device *dev = &ds90->client->dev; + struct i2c_board_info ser_info = { .type = "ds90ub953-q1", + .addr = rxport->ser_alias, + .of_node = rchip_np }; + + /* + * Adding the serializer under rxport->adap would be cleaner, + * but it would need tweaks to bypass the alias table. Adding + * to the upstream adapter is way simpler. + */ + rxport->ser_client = i2c_new_client_device(ds90->client->adapter, &ser_info); + if (!i2c_client_has_driver(rxport->ser_client)) { + rxport->ser_client = NULL; + return dev_err_probe(dev, PTR_ERR(rxport->ser_client), + "rx%d: cannot add %s i2c device", + nport, ser_info.type); + } + + dev_info(dev, "rx%d: remote serializer at alias 0x%02x\n", + nport, rxport->ser_client->addr); + + WARN(sysfs_add_link_to_group(&dev->kobj, ds90_rxport_attr_group[nport].name, + &rxport->ser_client->dev.kobj, "serializer"), + "rx%d: can't create ser symlink\n", nport); + + return 0; +} + +static void ds90_rxport_remove_serializer(struct ds90_data *ds90, int nport) +{ + struct device *dev = &ds90->client->dev; + struct ds90_rxport *rxport = ds90->rxport[nport]; + + if (rxport->ser_client) { + sysfs_remove_link_from_group(&dev->kobj, + ds90_rxport_attr_group[nport].name, + "serializer"); + i2c_unregister_device(rxport->ser_client); + rxport->ser_client = NULL; + } +} + +/* + * Return the local alias for a given remote serializer. + * Get it from devicetree, if absent fallback to the default. + */ +static unsigned short +ds90_rxport_get_remote_alias(struct ds90_data *ds90, + const struct ds90_rxport_info *info) +{ + struct device_node *np = ds90->client->dev.of_node; + u32 alias = info->remote_def_alias; + int i; + + if (np) { + i = of_property_match_string(np, "reg-names", + info->remote_name); + if (i >= 0) + of_property_read_u32_index(np, "reg", i, &alias); + } + + return alias; +} + +static int ds90_rxport_probe_one(struct ds90_data *ds90, + unsigned int nport, + struct device_node *endpoint_np, + struct device_node *rchip_np) +{ + static const struct ds90_rxport_info rxport_info[DS90_FPD_RX_NPORTS] = { + { "rxport0", "ser0", 0x40, 0x50 }, + }; + + struct device *dev = &ds90->client->dev; + struct ds90_rxport *rxport; + int err; + const struct ds90_rxport_info *info = &rxport_info[nport]; + + if (ds90->rxport[nport]) + return dev_err_probe(dev, -EADDRINUSE, + "OF: %pOF: duplicated reg value %d\n", + endpoint_np, nport); + + rxport = devm_kzalloc(dev, sizeof(*rxport), GFP_KERNEL); + if (!rxport) + return -ENOMEM; + + ds90->rxport[nport] = rxport; + + rxport->nport = nport; + rxport->ds90 = ds90; + rxport->ser_alias = ds90_rxport_get_remote_alias(ds90, info); + + /* Initialize access to local registers */ + rxport->reg_client = i2c_new_ancillary_device(ds90->client, + info->local_name, + info->local_def_alias); + if (IS_ERR(rxport->reg_client)) { + err = PTR_ERR(rxport->reg_client); + goto err_new_ancillary_device; + } + ds90_write_shared(ds90, DS90_SR_I2C_RX_ID(nport), + rxport->reg_client->addr << 1); + + /* Enable all interrupt sources from this port */ + ds90_write_rxport(ds90, nport, DS90_RR_PORT_ICR_HI, 0x07); + ds90_write_rxport(ds90, nport, DS90_RR_PORT_ICR_LO, 0x7f); + + /* Set I2C pass-through, but preserve BC_FREQ_SELECT strapping options */ + ds90_update_bits_rxport(ds90, nport, DS90_RR_BCC_CONFIG, + DS90_RR_BCC_CONFIG_I2C_PASS_THROUGH, ~0); + + /* Enable I2C communication to the serializer via the alias addr */ + ds90_write_rxport(ds90, nport, + DS90_RR_SER_ALIAS_ID, rxport->ser_alias << 1); + + err = sysfs_create_group(&dev->kobj, &ds90_rxport_attr_group[nport]); + if (err) { + dev_err(dev, "rx%d: failed creating sysfs group", nport); + goto err_sysfs; + } + + err = ds90_rxport_add_serializer(ds90, nport, rchip_np); + if (err) + goto err_add_serializer; + + err = ds90_gpiochip_probe(ds90, nport, rchip_np); + if (err) + goto err_gpiochip_probe; + + err = i2c_atr_add_adapter(ds90->atr, nport); + if (err) { + dev_err(dev, "rx%d: cannot add adapter", nport); + goto err_add_adapter; + } + + dev_info(dev, "rx%d: at alias 0x%02x\n", + nport, rxport->reg_client->addr); + + return 0; + +err_add_adapter: + ds90_gpiochip_remove(ds90, nport); +err_gpiochip_probe: + ds90_rxport_remove_serializer(ds90, nport); +err_add_serializer: + sysfs_remove_group(&dev->kobj, &ds90_rxport_attr_group[nport]); +err_sysfs: + i2c_unregister_device(rxport->reg_client); +err_new_ancillary_device: + return err; +} + +static void ds90_rxport_remove_one(struct ds90_data *ds90, int nport) +{ + struct ds90_rxport *rxport = ds90->rxport[nport]; + struct device *dev = &ds90->client->dev; + + i2c_atr_del_adapter(ds90->atr, nport); + ds90_gpiochip_remove(ds90, nport); + ds90_rxport_remove_serializer(ds90, nport); + i2c_unregister_device(rxport->reg_client); + sysfs_remove_group(&dev->kobj, &ds90_rxport_attr_group[nport]); +} + +static int ds90_atr_probe(struct ds90_data *ds90) +{ + struct i2c_adapter *parent_adap = ds90->client->adapter; + struct device *dev = &ds90->client->dev; + + ds90->atr = i2c_atr_new(parent_adap, dev, &ds90_atr_ops, + DS90_FPD_RX_NPORTS); + if (IS_ERR(ds90->atr)) + return PTR_ERR(ds90->atr); + + i2c_atr_set_clientdata(ds90->atr, ds90); + + return 0; +} + +static void ds90_atr_remove(struct ds90_data *ds90) +{ + i2c_atr_delete(ds90->atr); + ds90->atr = NULL; +} + +static void ds90_rxport_handle_events(struct ds90_data *ds90, int nport) +{ + struct ds90_rxport *rxport = ds90->rxport[nport]; + struct device *dev = &ds90->client->dev; + u8 rx_port_sts1; + u8 rx_port_sts2; + u8 csi_rx_sts; + bool locked; + int err = 0; + + /* Read interrupts (also clears most of them) */ + if (!err) + err = ds90_read_rxport(ds90, nport, + DS90_RR_RX_PORT_STS1, &rx_port_sts1); + if (!err) + err = ds90_read_rxport(ds90, nport, + DS90_RR_RX_PORT_STS2, &rx_port_sts2); + if (!err) + err = ds90_read_rxport(ds90, nport, + DS90_RR_CSI_RX_STS, &csi_rx_sts); + + if (err) + return; + + if (rx_port_sts1 & DS90_RR_RX_PORT_STS1_BCC_CRC_ERROR) + rxport->bcc_crc_error_count++; + + if (rx_port_sts1 & DS90_RR_RX_PORT_STS1_BCC_SEQ_ERROR) + rxport->bcc_seq_error_count++; + + if (rx_port_sts2 & DS90_RR_RX_PORT_STS2_LINE_LEN_UNSTABLE) + rxport->line_len_unstable_count++; + + if (rx_port_sts2 & DS90_RR_RX_PORT_STS2_LINE_LEN_CHG) + rxport->line_len_chg_count++; + + if (rx_port_sts2 & DS90_RR_RX_PORT_STS2_FPD3_ENCODE_ERROR) + rxport->fpd3_encode_error_count++; + + if (rx_port_sts2 & DS90_RR_RX_PORT_STS2_BUFFER_ERROR) + rxport->buffer_error_count++; + + if (rx_port_sts2 & DS90_RR_RX_PORT_STS2_LINE_CNT_CHG) + rxport->line_cnt_chg_count++; + + if (csi_rx_sts & DS90_RR_CSI_RX_STS_LENGTH_ERR) + rxport->csi_rx_sts_length_err_count++; + + if (csi_rx_sts & DS90_RR_CSI_RX_STS_CKSUM_ERR) + rxport->csi_rx_sts_cksum_err_count++; + + if (csi_rx_sts & DS90_RR_CSI_RX_STS_ECC2_ERR) + rxport->csi_rx_sts_ecc2_err_count++; + + if (csi_rx_sts & DS90_RR_CSI_RX_STS_ECC1_ERR) + rxport->csi_rx_sts_ecc1_err_count++; + + if (rx_port_sts1 & DS90_RR_RX_PORT_STS1_PARITY_ERROR) { + u8 cnt_hi; + u8 cnt_lo; + int err_hi; + int err_lo; + + err_hi = ds90_read_rxport(ds90, nport, + DS90_RR_RX_PAR_ERR_HI, &cnt_hi); + err_lo = ds90_read_rxport(ds90, nport, + DS90_RR_RX_PAR_ERR_LO, &cnt_lo); + + if (!err_hi && !err_lo) + rxport->fpd3_parity_errors += (cnt_hi << 8) + cnt_lo; + } + + /* Update locked status */ + locked = rx_port_sts1 & DS90_RR_RX_PORT_STS1_LOCK_STS; + if (rx_port_sts1 & DS90_RR_RX_PORT_STS1_LOCK_STS_CHG || + locked != rxport->locked) { + dev_info(dev, "rx%d: %sLOCKED\n", nport, locked ? "" : "NOT "); + rxport->locked = locked; + sysfs_notify(&dev->kobj, ds90_rxport_attr_group[nport].name, "locked"); + } +} + +/* ----------------------------------------------------------------------------- + * V4L2 + */ + +static void ds90_set_tpg(struct ds90_data *ds90, int tpg_num) +{ + if (tpg_num == 0) { + /* TPG off, enable forwarding from FPD-3 RX ports */ + ds90_write_shared(ds90, DS90_SR_FWD_CTL1, 0x00); + + ds90_write_ind8(ds90, DS90_IR_PGEN_CTL, 0x00); + } else { + /* TPG on */ + + u8 vbp = 33; + u8 vfp = 10; + u16 blank_lines = vbp + vfp + 2; /* total blanking lines */ + + u16 width = ds90->fmt[DS90_NPORTS - 1].width; + u16 height = ds90->fmt[DS90_NPORTS - 1].height; + u16 bytespp = 2; /* For MEDIA_BUS_FMT_UYVY8_1X16 */ + u8 cbars_idx = tpg_num - TEST_PATTERN_V_COLOR_BARS_1; + u8 num_cbars = 1 << cbars_idx; + + u16 line_size = width * bytespp; /* Line size [bytes] */ + u16 bar_size = line_size / num_cbars; /* cbar size [bytes] */ + u16 act_lpf = height; /* active lines/frame */ + u16 tot_lpf = act_lpf + blank_lines; /* tot lines/frame */ + /* Line period in 10-ns units */ + u16 line_pd = 100000000 / 60 / tot_lpf; + + /* Disable forwarding from FPD-3 RX ports */ + ds90_write_shared(ds90, + DS90_SR_FWD_CTL1, + DS90_SR_FWD_CTL1_PORT_DIS(0) | + DS90_SR_FWD_CTL1_PORT_DIS(1)); + + /* Access Indirect Pattern Gen */ + ds90_write_shared(ds90, + DS90_SR_IND_ACC_CTL, + DS90_SR_IND_ACC_CTL_IA_AUTO_INC | 0); + + ds90_write_ind8(ds90, + DS90_IR_PGEN_CTL, + DS90_IR_PGEN_CTL_PGEN_ENABLE); + + /* YUV422 8bit: 2 bytes/block, CSI-2 data type 0x1e */ + ds90_write_ind8(ds90, DS90_IR_PGEN_CFG, cbars_idx << 4); + ds90_write_ind8(ds90, DS90_IR_PGEN_CSI_DI, 0x1e); + + ds90_write_ind16(ds90, DS90_IR_PGEN_LINE_SIZE1, line_size); + ds90_write_ind16(ds90, DS90_IR_PGEN_BAR_SIZE1, bar_size); + ds90_write_ind16(ds90, DS90_IR_PGEN_ACT_LPF1, act_lpf); + ds90_write_ind16(ds90, DS90_IR_PGEN_TOT_LPF1, tot_lpf); + ds90_write_ind16(ds90, DS90_IR_PGEN_LINE_PD1, line_pd); + ds90_write_ind8(ds90, DS90_IR_PGEN_VBP, vbp); + ds90_write_ind8(ds90, DS90_IR_PGEN_VFP, vfp); + } +} + +static int ds90_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct ds90_data *ds90 = container_of(ctrl->handler, struct ds90_data, + ctrl_handler); + + switch (ctrl->id) { + case V4L2_CID_TEST_PATTERN: + ds90_set_tpg(ds90, ctrl->val); + break; + } + return 0; +} + +static int ds90_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct ds90_data *ds90 = sd_to_ds90(sd); + unsigned int csi_ctl = DS90_TR_CSI_CTL_CSI_ENABLE; + + if (enable) { + /* + * From the datasheet: "initial CSI Skew-Calibration + * sequence [...] should be set when operating at 1.6 Gbps" + */ + if (ds90->csitxport[0]->speed_select == 0) // Only port 0 implemented currently + csi_ctl |= DS90_TR_CSI_CTL_CSI_CAL_EN; + + ds90_write_shared(ds90, DS90_SR_CSI_PLL_CTL, ds90->csitxport[0]->speed_select); + ds90_write_shared(ds90, DS90_TR_CSI_CTL, csi_ctl); + } else { + ds90_write_shared(ds90, DS90_TR_CSI_CTL, 0); + } + + return 0; +} + +static struct v4l2_mbus_framefmt * +ds90_get_pad_format(struct ds90_data *ds90, + struct v4l2_subdev_state *state, + unsigned int pad, u32 which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_format(&ds90->sd, state, pad); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &ds90->fmt[pad]; + default: + return NULL; + } +} + +static int ds90_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_format *format) +{ + struct ds90_data *ds90 = sd_to_ds90(sd); + struct v4l2_mbus_framefmt *cfg_fmt; + + if (format->pad >= DS90_NPORTS) + return -EINVAL; + + cfg_fmt = ds90_get_pad_format(ds90, state, format->pad, format->which); + if (!cfg_fmt) + return -EINVAL; + + format->format = *cfg_fmt; + + return 0; +} + +static void ds90_init_format(struct v4l2_mbus_framefmt *fmt) +{ + fmt->width = 1920; + fmt->height = 1080; + fmt->code = MEDIA_BUS_FMT_UYVY8_1X16; + fmt->colorspace = V4L2_COLORSPACE_SRGB; + fmt->field = V4L2_FIELD_NONE; +} + +static const struct v4l2_ctrl_ops ds90_ctrl_ops = { + .s_ctrl = ds90_s_ctrl, +}; + +static const struct v4l2_subdev_video_ops ds90_video_ops = { + .s_stream = ds90_s_stream, +}; + +static const struct v4l2_subdev_pad_ops ds90_pad_ops = { + .get_fmt = ds90_get_fmt, +}; + +static const struct v4l2_subdev_ops ds90_subdev_ops = { + .video = &ds90_video_ops, + .pad = &ds90_pad_ops, +}; + +/* ----------------------------------------------------------------------------- + * Core + */ + +static irqreturn_t ds90_handle_events(int irq, void *arg) +{ + struct ds90_data *ds90 = arg; + u8 int_sts; + int err; + int i; + + err = ds90_read_shared(ds90, DS90_SR_INTERRUPT_STS, &int_sts); + + if (!err && int_sts) { + if (int_sts & DS90_SR_INTERRUPT_STS_IS_CSI_TX0) + ds90_csi_handle_events(ds90); + + for (i = 0; i < DS90_FPD_RX_NPORTS; i++) + if (int_sts & DS90_SR_INTERRUPT_STS_IS_RX(i) && + ds90->rxport[i]) + ds90_rxport_handle_events(ds90, i); + } + + return IRQ_HANDLED; +} + +static int ds90_run(void *arg) +{ + struct ds90_data *ds90 = arg; + + while (1) { + if (kthread_should_stop()) + break; + + ds90_handle_events(0, ds90); + + msleep(1000); + } + + return 0; +} + +static void ds90_remove_ports(struct ds90_data *ds90) +{ + int i; + + for (i = 0; i < DS90_FPD_RX_NPORTS; i++) + if (ds90->rxport[i]) + ds90_rxport_remove_one(ds90, i); + + /* CSI ports have no _remove_one(). No rollback needed. */ +} + +/* + * Return node of remote chip with a given reg. + * + * Returns a node pointer if found, with refcount incremented, use + * of_node_put() on it when done. Returns NULL if node is not found. + */ +static struct device_node *ds90_get_rchip_node(struct ds90_data *ds90, int nport) +{ + struct device *dev = &ds90->client->dev; + struct device_node *rchips; + struct device_node *child; + u32 reg; + int err; + + rchips = of_get_child_by_name(dev->of_node, "remote-chips"); + + for_each_child_of_node(rchips, child) { + err = of_property_read_u32(child, "reg", ®); + if (err) + continue; + if (nport == reg) + break; + } + + of_node_put(rchips); + return child; +} + +static int ds90_register_clocks(struct ds90_data *ds90) +{ + struct device *dev = &ds90->client->dev; + const char *name; + int err; + + /* Get our input clock (REFCLK, 23..26 MHz) */ + + ds90->refclk = devm_clk_get(dev, NULL); + if (IS_ERR(ds90->refclk)) + return dev_err_probe(dev, PTR_ERR(ds90->refclk), "Cannot get REFCLK"); + + dev_dbg(dev, "REFCLK: %10lu Hz\n", clk_get_rate(ds90->refclk)); + + /* Provide FPD-Link III line rate (160 * REFCLK in Synchronous mode) */ + + name = kasprintf(GFP_KERNEL, "%s.fpd_line_rate", dev_name(dev)); + ds90->line_clk_hw = + devm_clk_hw_register_fixed_factor(dev, name, + __clk_get_name(ds90->refclk), + 0, 160, 1); + kfree(name); + if (IS_ERR(ds90->line_clk_hw)) + return dev_err_probe(dev, PTR_ERR(ds90->line_clk_hw), + "Cannot register clock HW\n"); + + dev_dbg(dev, "line rate: %10lu Hz\n", clk_hw_get_rate(ds90->line_clk_hw)); + + /* Expose the line rate to OF */ + + err = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, ds90->line_clk_hw); + if (err) + return dev_err_probe(dev, err, "Cannot add OF clock provider\n"); + + return 0; +} + +static int ds90_parse_dt(struct ds90_data *ds90) +{ + struct device_node *np = ds90->client->dev.of_node; + struct device *dev = &ds90->client->dev; + struct device_node *ep_np = NULL; + int err = 0; + int n; + + if (!np) + return dev_err_probe(dev, -ENOENT, "OF: no device tree node!\n"); + + n = of_property_read_variable_u16_array(np, "i2c-alias-pool", + ds90->atr_alias_id, + 2, DS90_MAX_POOL_ALIASES); + if (n < 0) + dev_warn(dev, + "OF: no i2c-alias-pool, can't access remote I2C slaves"); + + ds90->atr_alias_num = n; + + dev_dbg(dev, "i2c-alias-pool has %zu aliases", ds90->atr_alias_num); + + for_each_endpoint_of_node(np, ep_np) { + struct of_endpoint ep; + + of_graph_parse_endpoint(ep_np, &ep); + + dev_dbg(dev, "parsing port %d ep %d: %pOF", + ep.port, ep.id, ep.local_node); + + if (ep.port >= DS90_NPORTS || ep.id != 0) + return dev_err_probe(dev, -EINVAL, + "OF: %pOF: missing or invalid port/endpoint number\n", + np); + + if (ep.port < DS90_FPD_RX_NPORTS) { + struct device_node *rc_np = ds90_get_rchip_node(ds90, ep.port); + + if (!rc_np) { + dev_err(dev, "OF: rx%d: missing remote chip", ep.port); + of_node_put(rc_np); + err = -EINVAL; + break; + } + err = ds90_rxport_probe_one(ds90, ep.port, ep_np, rc_np); + of_node_put(rc_np); + } else { + err = ds90_csiport_probe_one(ds90, ep.port - DS90_FPD_RX_NPORTS, ep_np); + } + + if (err) { + of_node_put(ep_np); + break; + } + } + + if (err) + ds90_remove_ports(ds90); + + return err; +} + +static int ds90_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct ds90_data *ds90; + u8 rev_mask; + int err; + int i; + + ds90 = devm_kzalloc(dev, sizeof(*ds90), GFP_KERNEL); + if (!ds90) + return -ENOMEM; + + ds90->client = client; + i2c_set_clientdata(client, ds90); + mutex_init(&ds90->alias_table_lock); + + /* get reset pin from DT */ + ds90->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ds90->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(ds90->reset_gpio), + "Cannot get reset GPIO"); + + ds90_reset(ds90, false); + + err = ds90_register_clocks(ds90); + if (err) + goto err_register_clocks; + + err = clk_prepare_enable(ds90->refclk); + if (err) { + dev_err(dev, "Cannot prepare and enable REFCLK (%d)", err); + goto err_clk_prepare_enable; + } + + /* Runtime check register accessibility */ + err = ds90_read_shared(ds90, DS90_SR_REV_MASK, &rev_mask); + if (err) { + dev_err(dev, "Cannot read first register (%d), abort\n", err); + goto err_reg_read; + } + + err = ds90_atr_probe(ds90); + if (err) + goto err_atr_probe; + + err = ds90_parse_dt(ds90); + if (err) + goto err_parse_dt; + + /* V4L2 */ + + for (i = 0; i < DS90_NPORTS; i++) + ds90_init_format(&ds90->fmt[i]); + + v4l2_i2c_subdev_init(&ds90->sd, client, &ds90_subdev_ops); + v4l2_ctrl_handler_init(&ds90->ctrl_handler, + ARRAY_SIZE(ds90_tpg_qmenu) - 1); + ds90->sd.ctrl_handler = &ds90->ctrl_handler; + + v4l2_ctrl_new_std_menu_items(&ds90->ctrl_handler, &ds90_ctrl_ops, + V4L2_CID_TEST_PATTERN, + ARRAY_SIZE(ds90_tpg_qmenu) - 1, 0, 0, + ds90_tpg_qmenu); + + if (ds90->ctrl_handler.error) { + err = ds90->ctrl_handler.error; + goto err_add_ctrls; + } + + /* Let both the I2C client and the subdev point to us */ + i2c_set_clientdata(client, ds90); /* v4l2_i2c_subdev_init writes it */ + v4l2_set_subdevdata(&ds90->sd, ds90); + + ds90->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + ds90->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; + + for (i = 0; i < DS90_NPORTS; i++) + ds90->pads[i].flags = (i < DS90_FPD_RX_NPORTS) ? + MEDIA_PAD_FL_SINK : MEDIA_PAD_FL_SOURCE; + + err = media_entity_pads_init(&ds90->sd.entity, DS90_NPORTS, ds90->pads); + if (err) + goto err_pads_init; + + err = v4l2_async_register_subdev(&ds90->sd); + if (err) { + dev_err(dev, "v4l2_async_register_subdev error %d\n", err); + goto err_register_subdev; + } + + /* Kick off */ + + if (client->irq) { + dev_info(dev, "using IRQ %d\n", client->irq); + + err = devm_request_threaded_irq(dev, client->irq, + NULL, ds90_handle_events, + IRQF_ONESHOT, client->name, + ds90); + if (err) { + dev_err(dev, "Cannot enable IRQ (%d)\n", err); + goto err_irq; + } + + /* Disable GPIO3 as input */ + ds90_update_bits_shared(ds90, DS90_SR_GPIO_INPUT_CTL, + BIT(3), 0); + /* Enable GPIO3 as output, active low interrupt */ + ds90_write_shared(ds90, DS90_SR_GPIO_PIN_CTL(3), 0xd1); + + ds90_write_shared(ds90, DS90_SR_INTERRUPT_CTL, + DS90_SR_INTERRUPT_CTL_ALL); + } else { + /* No IRQ, fallback to polling */ + + ds90->kthread = kthread_run(ds90_run, ds90, dev_name(dev)); + if (IS_ERR(ds90->kthread)) { + err = PTR_ERR(ds90->kthread); + dev_err(dev, "Cannot create kthread (%d)\n", err); + goto err_kthread; + } + dev_info(dev, "using polling mode\n"); + } + + /* By default enable forwarding from both ports */ + ds90_write_shared(ds90, DS90_SR_FWD_CTL1, 0x00); + + dev_info(dev, "Successfully probed (rev/mask %02x)\n", rev_mask); + + return 0; + +err_kthread: +err_irq: + v4l2_async_unregister_subdev(&ds90->sd); +err_register_subdev: + media_entity_cleanup(&ds90->sd.entity); +err_pads_init: +err_add_ctrls: + v4l2_ctrl_handler_free(&ds90->ctrl_handler); + ds90_remove_ports(ds90); +err_parse_dt: + ds90_atr_remove(ds90); +err_atr_probe: +err_reg_read: +err_clk_prepare_enable: +err_register_clocks: + ds90_reset(ds90, true); + mutex_destroy(&ds90->alias_table_lock); + return err; +} + +static int ds90_remove(struct i2c_client *client) +{ + struct ds90_data *ds90 = i2c_get_clientdata(client); + + dev_info(&client->dev, "Removing\n"); + + if (ds90->kthread) + kthread_stop(ds90->kthread); + v4l2_async_unregister_subdev(&ds90->sd); + media_entity_cleanup(&ds90->sd.entity); + v4l2_ctrl_handler_free(&ds90->ctrl_handler); + ds90_remove_ports(ds90); + ds90_atr_remove(ds90); + ds90_reset(ds90, true); + mutex_destroy(&ds90->alias_table_lock); + + return 0; +} + +static const struct i2c_device_id ds90_id[] = { + { "ds90ub954-q1", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ds90_id); + +#ifdef CONFIG_OF +static const struct of_device_id ds90_dt_ids[] = { + { .compatible = "ti,ds90ub954-q1", }, + { } +}; +MODULE_DEVICE_TABLE(of, ds90_dt_ids); +#endif + +static struct i2c_driver ds90ub954_driver = { + .probe_new = ds90_probe, + .remove = ds90_remove, + .id_table = ds90_id, + .driver = { + .name = "ds90ub954", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(ds90_dt_ids), + }, +}; + +module_i2c_driver(ds90ub954_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Texas Instruments DS90UB954-Q1 CSI-2 dual deserializer driver"); +MODULE_AUTHOR("Luca Ceresoli "); -- 2.25.1