linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Phillip Potter <phil@philpotter.co.uk>
To: gregkh@linuxfoundation.org
Cc: dan.carpenter@oracle.com, Larry.Finger@lwfinger.net,
	straube.linux@gmail.com, martin@kaiser.cx,
	linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
	paskripkin@gmail.com
Subject: [PATCH v2 01/15] staging: r8188eu: remove previously converted DBG_88E_LEVEL calls
Date: Wed, 16 Feb 2022 01:06:55 +0000	[thread overview]
Message-ID: <20220216010709.791-2-phil@philpotter.co.uk> (raw)
In-Reply-To: <20220216010709.791-1-phil@philpotter.co.uk>

Remove all netdev_dbg and dev_dbg calls that were previously converted
from DBG_88E_LEVEL. After some thought, it makes more sense to just
entirely strip all of these calls, so that debugging code in the driver
can be more consistent and useful going forwards.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
---
 drivers/staging/r8188eu/core/rtw_fw.c        |  1 -
 drivers/staging/r8188eu/core/rtw_ioctl_set.c |  5 ----
 drivers/staging/r8188eu/core/rtw_mlme_ext.c  | 28 --------------------
 drivers/staging/r8188eu/core/rtw_pwrctrl.c   |  8 ------
 drivers/staging/r8188eu/core/rtw_xmit.c      |  1 -
 drivers/staging/r8188eu/os_dep/ioctl_linux.c |  2 --
 6 files changed, 45 deletions(-)

diff --git a/drivers/staging/r8188eu/core/rtw_fw.c b/drivers/staging/r8188eu/core/rtw_fw.c
index f591b091b8af..ce0e4e3b21f9 100644
--- a/drivers/staging/r8188eu/core/rtw_fw.c
+++ b/drivers/staging/r8188eu/core/rtw_fw.c
@@ -243,7 +243,6 @@ static int load_firmware(struct rt_firmware *rtfw, struct device *device)
 		goto exit;
 	}
 	rtfw->size = fw->size;
-	dev_dbg(device, "!bUsedWoWLANFw, FmrmwareLen:%d+\n", rtfw->size);
 
 exit:
 	release_firmware(fw);
diff --git a/drivers/staging/r8188eu/core/rtw_ioctl_set.c b/drivers/staging/r8188eu/core/rtw_ioctl_set.c
index c95ca471ae55..e7f35370b69c 100644
--- a/drivers/staging/r8188eu/core/rtw_ioctl_set.c
+++ b/drivers/staging/r8188eu/core/rtw_ioctl_set.c
@@ -110,8 +110,6 @@ u8 rtw_set_802_11_bssid(struct adapter *padapter, u8 *bssid)
 	u32 cur_time = 0;
 	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
 
-	netdev_dbg(padapter->pnetdev, "set bssid:%pM\n", bssid);
-
 	if ((bssid[0] == 0x00 && bssid[1] == 0x00 && bssid[2] == 0x00 &&
 	     bssid[3] == 0x00 && bssid[4] == 0x00 && bssid[5] == 0x00) ||
 	    (bssid[0] == 0xFF && bssid[1] == 0xFF && bssid[2] == 0xFF &&
@@ -186,9 +184,6 @@ u8 rtw_set_802_11_ssid(struct adapter *padapter, struct ndis_802_11_ssid *ssid)
 	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
 	struct wlan_network *pnetwork = &pmlmepriv->cur_network;
 
-	netdev_dbg(padapter->pnetdev, "set ssid [%s] fw_state=0x%08x\n",
-		   ssid->Ssid, get_fwstate(pmlmepriv));
-
 	if (!padapter->hw_init_completed) {
 		status = _FAIL;
 		goto exit;
diff --git a/drivers/staging/r8188eu/core/rtw_mlme_ext.c b/drivers/staging/r8188eu/core/rtw_mlme_ext.c
index ceca6751cdee..6c354383c1d2 100644
--- a/drivers/staging/r8188eu/core/rtw_mlme_ext.c
+++ b/drivers/staging/r8188eu/core/rtw_mlme_ext.c
@@ -649,8 +649,6 @@ unsigned int OnBeacon(struct adapter *padapter, struct recv_frame *precv_frame)
 			if (psta) {
 				ret = rtw_check_bcn_info(padapter, pframe, len);
 				if (!ret) {
-					netdev_dbg(padapter->pnetdev,
-						   "ap has changed, disconnect now\n");
 					receive_disconnect(padapter,
 							   pmlmeinfo->network.MacAddress, 0);
 					return _SUCCESS;
@@ -932,7 +930,6 @@ unsigned int OnAuthClient(struct adapter *padapter, struct recv_frame *precv_fra
 	}
 
 	if (go2asoc) {
-		netdev_dbg(padapter->pnetdev, "auth success, start assoc\n");
 		start_clnt_assoc(padapter);
 		return _SUCCESS;
 	}
@@ -1507,10 +1504,6 @@ unsigned int OnDeAuth(struct adapter *padapter, struct recv_frame *precv_frame)
 		struct sta_info *psta;
 		struct sta_priv *pstapriv = &padapter->stapriv;
 
-		netdev_dbg(padapter->pnetdev,
-			   "ap recv deauth reason code(%d) sta:%pM\n",
-			   reason, GetAddr2Ptr(pframe));
-
 		psta = rtw_get_stainfo(pstapriv, GetAddr2Ptr(pframe));
 		if (psta) {
 			u8 updated = 0;
@@ -1545,10 +1538,6 @@ unsigned int OnDeAuth(struct adapter *padapter, struct recv_frame *precv_frame)
 			}
 		}
 
-		netdev_dbg(padapter->pnetdev,
-			   "sta recv deauth reason code(%d) sta:%pM, ignore = %d\n",
-			   reason, GetAddr3Ptr(pframe), ignore_received_deauth);
-
 		if (!ignore_received_deauth)
 			receive_disconnect(padapter, GetAddr3Ptr(pframe), reason);
 	}
@@ -1582,10 +1571,6 @@ unsigned int OnDisassoc(struct adapter *padapter, struct recv_frame *precv_frame
 		struct sta_info *psta;
 		struct sta_priv *pstapriv = &padapter->stapriv;
 
-		netdev_dbg(padapter->pnetdev,
-			   "ap recv disassoc reason code(%d) sta:%pM\n",
-			   reason, GetAddr2Ptr(pframe));
-
 		psta = rtw_get_stainfo(pstapriv, GetAddr2Ptr(pframe));
 		if (psta) {
 			u8 updated = 0;
@@ -1603,10 +1588,6 @@ unsigned int OnDisassoc(struct adapter *padapter, struct recv_frame *precv_frame
 
 		return _SUCCESS;
 	} else {
-		netdev_dbg(padapter->pnetdev,
-			   "ap recv disassoc reason code(%d) sta:%pM\n",
-			   reason, GetAddr3Ptr(pframe));
-
 		receive_disconnect(padapter, GetAddr3Ptr(pframe), reason);
 	}
 	pmlmepriv->LinkDetectInfo.bBusyTraffic = false;
@@ -6506,7 +6487,6 @@ void start_clnt_auth(struct adapter *padapter)
 	/*	For the Win8 P2P connection, it will be hard to have a successful connection if this Wi-Fi doesn't connect to it. */
 	issue_deauth(padapter, (&pmlmeinfo->network)->MacAddress, WLAN_REASON_DEAUTH_LEAVING);
 
-	netdev_dbg(padapter->pnetdev, "start auth\n");
 	issue_auth(padapter, NULL, 0);
 
 	set_link_timer(pmlmeext, REAUTH_TO);
@@ -7266,8 +7246,6 @@ void linked_status_chk(struct adapter *padapter)
 			if (rx_chk == _FAIL) {
 				pmlmeext->retry++;
 				if (pmlmeext->retry > rx_chk_limit) {
-					netdev_dbg(padapter->pnetdev,
-						   "disconnect or roaming\n");
 					receive_disconnect(padapter, pmlmeinfo->network.MacAddress,
 							   WLAN_REASON_EXPIRATION_CHK);
 					return;
@@ -7793,9 +7771,6 @@ u8 setkey_hdl(struct adapter *padapter, u8 *pbuf)
 	/* write cam */
 	ctrl = BIT(15) | ((pparm->algorithm) << 2) | pparm->keyid;
 
-	netdev_dbg(padapter->pnetdev,
-		   "set group key to hw: alg:%d(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:%d\n",
-		   pparm->algorithm, pparm->keyid);
 	write_cam(padapter, pparm->keyid, ctrl, null_sta, pparm->key);
 
 	return H2C_SUCCESS;
@@ -7824,9 +7799,6 @@ u8 set_stakey_hdl(struct adapter *padapter, u8 *pbuf)
 
 	cam_id = 4;
 
-	netdev_dbg(padapter->pnetdev,
-		   "set pairwise key to hw: alg:%d(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:%d\n",
-		   pparm->algorithm, cam_id);
 	if ((pmlmeinfo->state & 0x03) == WIFI_FW_AP_STATE) {
 		struct sta_info *psta;
 		struct sta_priv *pstapriv = &padapter->stapriv;
diff --git a/drivers/staging/r8188eu/core/rtw_pwrctrl.c b/drivers/staging/r8188eu/core/rtw_pwrctrl.c
index 46e44aee587f..ff35685eaa12 100644
--- a/drivers/staging/r8188eu/core/rtw_pwrctrl.c
+++ b/drivers/staging/r8188eu/core/rtw_pwrctrl.c
@@ -15,12 +15,6 @@ void ips_enter(struct adapter *padapter)
 
 	if (pxmit_priv->free_xmitbuf_cnt != NR_XMITBUFF ||
 	    pxmit_priv->free_xmit_extbuf_cnt != NR_XMIT_EXTBUFF) {
-		netdev_dbg(padapter->pnetdev,
-			   "There are some pkts to transmit\n");
-		netdev_dbg(padapter->pnetdev,
-			   "free_xmitbuf_cnt: %d, free_xmit_extbuf_cnt: %d\n",
-			   pxmit_priv->free_xmitbuf_cnt,
-			   pxmit_priv->free_xmit_extbuf_cnt);
 		return;
 	}
 
@@ -35,7 +29,6 @@ void ips_enter(struct adapter *padapter)
 	DBG_88E("==>ips_enter cnts:%d\n", pwrpriv->ips_enter_cnts);
 	if (rf_off == pwrpriv->change_rfpwrstate) {
 		pwrpriv->bpower_saving = true;
-		netdev_dbg(padapter->pnetdev, "nolinked power save enter\n");
 
 		if (pwrpriv->ips_mode == IPS_LEVEL_2)
 			pwrpriv->bkeepfwalive = true;
@@ -68,7 +61,6 @@ int ips_leave(struct adapter *padapter)
 		if (result == _SUCCESS) {
 			pwrpriv->rf_pwrstate = rf_on;
 		}
-		netdev_dbg(padapter->pnetdev, "nolinked power save leave\n");
 
 		if ((_WEP40_ == psecuritypriv->dot11PrivacyAlgrthm) || (_WEP104_ == psecuritypriv->dot11PrivacyAlgrthm)) {
 			DBG_88E("==>%s, channel(%d), processing(%x)\n", __func__, padapter->mlmeextpriv.cur_channel, pwrpriv->bips_processing);
diff --git a/drivers/staging/r8188eu/core/rtw_xmit.c b/drivers/staging/r8188eu/core/rtw_xmit.c
index f3e788e42b18..30714fee1921 100644
--- a/drivers/staging/r8188eu/core/rtw_xmit.c
+++ b/drivers/staging/r8188eu/core/rtw_xmit.c
@@ -460,7 +460,6 @@ static s32 update_attrib(struct adapter *padapter, struct sk_buff *pkt, struct p
 			}
 		}
 	} else if (0x888e == pattrib->ether_type) {
-		netdev_dbg(padapter->pnetdev, "send eapol packet\n");
 	}
 
 	if ((pattrib->ether_type == 0x888e) || (pattrib->dhcp_pkt == 1))
diff --git a/drivers/staging/r8188eu/os_dep/ioctl_linux.c b/drivers/staging/r8188eu/os_dep/ioctl_linux.c
index f6a683cda614..3bb2714a6a54 100644
--- a/drivers/staging/r8188eu/os_dep/ioctl_linux.c
+++ b/drivers/staging/r8188eu/os_dep/ioctl_linux.c
@@ -58,7 +58,6 @@ void rtw_indicate_wx_assoc_event(struct adapter *padapter)
 
 	memcpy(wrqu.ap_addr.sa_data, pmlmepriv->cur_network.network.MacAddress, ETH_ALEN);
 
-	netdev_dbg(padapter->pnetdev, "assoc success\n");
 	wireless_send_event(padapter->pnetdev, SIOCGIWAP, &wrqu, NULL);
 }
 
@@ -71,7 +70,6 @@ void rtw_indicate_wx_disassoc_event(struct adapter *padapter)
 	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
 	memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
 
-	netdev_dbg(padapter->pnetdev, "indicate disassoc\n");
 	wireless_send_event(padapter->pnetdev, SIOCGIWAP, &wrqu, NULL);
 }
 
-- 
2.34.1


  reply	other threads:[~2022-02-16  1:07 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-16  1:06 [PATCH v2 00/15] staging: r8188eu: Cleanup and removal of DBG_88E macro Phillip Potter
2022-02-16  1:06 ` Phillip Potter [this message]
2022-02-16  1:06 ` [PATCH v2 02/15] staging: r8188eu: remove smaller sets of converted DBG_88E calls Phillip Potter
2022-02-16  9:42   ` Pavel Skripkin
2022-02-17 14:29     ` Dan Carpenter
2022-02-17 14:36     ` Dan Carpenter
2022-02-16  1:06 ` [PATCH v2 03/15] staging: r8188eu: remove converted DBG_88E calls from core/rtw_mlme_ext.c Phillip Potter
2022-02-16  9:50   ` Pavel Skripkin
2022-02-16  1:06 ` [PATCH v2 04/15] staging: r8188eu: remove DBG_88E calls from core subdir Phillip Potter
2022-02-16  1:06 ` [PATCH v2 05/15] staging: r8188eu: remove DBG_88E calls from hal subdir Phillip Potter
2022-02-16 21:35   ` kernel test robot
2022-02-16  1:07 ` [PATCH v2 06/15] staging: r8188eu: remove DBG_88E calls from os_dep/ioctl_linux.c Phillip Potter
2022-02-16  1:07 ` [PATCH v2 07/15] staging: r8188eu: remove remaining DBG_88E calls from os_dep subdir Phillip Potter
2022-02-16  1:07 ` [PATCH v2 08/15] staging: r8188eu: remove remaining DBG_88E call from include/usb_ops.h Phillip Potter
2022-02-16  1:07 ` [PATCH v2 09/15] staging: r8188eu: remove all aliased DBG_88E calls Phillip Potter
2022-02-16  1:07 ` [PATCH v2 10/15] staging: r8188eu: remove DBG_88E macro definition Phillip Potter
2022-02-16  1:07 ` [PATCH v2 11/15] staging: r8188eu: remove rtw_debug module parameter Phillip Potter
2022-02-16  1:07 ` [PATCH v2 12/15] staging: r8188eu: fix lines modified by DBG_88E cleanup Phillip Potter
2022-02-16  1:07 ` [PATCH v2 13/15] staging: r8188eu: remove rtw_sctx_chk_waring_status function Phillip Potter
2022-02-16  1:07 ` [PATCH v2 14/15] staging: r8188eu: remove padapter param from aes_decipher function Phillip Potter
2022-02-16  1:07 ` [PATCH v2 15/15] staging: r8188eu: correct long line warnings near prior DBG_88E calls Phillip Potter
2022-02-16 10:01   ` David Laight
2022-02-16 23:45     ` Phillip Potter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220216010709.791-2-phil@philpotter.co.uk \
    --to=phil@philpotter.co.uk \
    --cc=Larry.Finger@lwfinger.net \
    --cc=dan.carpenter@oracle.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=martin@kaiser.cx \
    --cc=paskripkin@gmail.com \
    --cc=straube.linux@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).