linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jiri Slaby <jslaby@suse.cz>
To: gregkh@linuxfoundation.org
Cc: linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
	Jiri Slaby <jslaby@suse.cz>, Johan Hovold <johan@kernel.org>,
	linux-usb@vger.kernel.org
Subject: [PATCH 3/5] USB: serial: make use of UART_LCR_WLEN() + tty_get_char_size()
Date: Thu, 24 Feb 2022 10:55:56 +0100	[thread overview]
Message-ID: <20220224095558.30929-3-jslaby@suse.cz> (raw)
In-Reply-To: <20220224095558.30929-1-jslaby@suse.cz>

Having a generic UART_LCR_WLEN() macro and the tty_get_char_size()
helper, we can remove all those repeated switch-cases in drivers.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Johan Hovold <johan@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
---
 drivers/usb/serial/ark3116.c  | 17 ++---------------
 drivers/usb/serial/f81232.c   | 16 +---------------
 drivers/usb/serial/f81534.c   | 16 +---------------
 drivers/usb/serial/mos7720.c  | 20 +-------------------
 drivers/usb/serial/quatech2.c | 16 +---------------
 drivers/usb/serial/ssu100.c   | 16 +---------------
 6 files changed, 7 insertions(+), 94 deletions(-)

diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 5dd710e9fe7d..c0e4df87ff22 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -200,21 +200,8 @@ static void ark3116_set_termios(struct tty_struct *tty,
 	__u8 lcr, hcr, eval;
 
 	/* set data bit count */
-	switch (cflag & CSIZE) {
-	case CS5:
-		lcr = UART_LCR_WLEN5;
-		break;
-	case CS6:
-		lcr = UART_LCR_WLEN6;
-		break;
-	case CS7:
-		lcr = UART_LCR_WLEN7;
-		break;
-	default:
-	case CS8:
-		lcr = UART_LCR_WLEN8;
-		break;
-	}
+	lcr = UART_LCR_WLEN(tty_get_char_size(cflag));
+
 	if (cflag & CSTOPB)
 		lcr |= UART_LCR_STOP;
 	if (cflag & PARENB)
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 3ad1f515fb68..d9f20256a6a8 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -643,21 +643,7 @@ static void f81232_set_termios(struct tty_struct *tty,
 	if (C_CSTOPB(tty))
 		new_lcr |= UART_LCR_STOP;
 
-	switch (C_CSIZE(tty)) {
-	case CS5:
-		new_lcr |= UART_LCR_WLEN5;
-		break;
-	case CS6:
-		new_lcr |= UART_LCR_WLEN6;
-		break;
-	case CS7:
-		new_lcr |= UART_LCR_WLEN7;
-		break;
-	default:
-	case CS8:
-		new_lcr |= UART_LCR_WLEN8;
-		break;
-	}
+	new_lcr |= UART_LCR_WLEN(tty_get_char_size(tty->termios.c_cflag));
 
 	mutex_lock(&priv->lock);
 
diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c
index c0bca52ef92a..d789c1ec87b3 100644
--- a/drivers/usb/serial/f81534.c
+++ b/drivers/usb/serial/f81534.c
@@ -970,21 +970,7 @@ static void f81534_set_termios(struct tty_struct *tty,
 	if (C_CSTOPB(tty))
 		new_lcr |= UART_LCR_STOP;
 
-	switch (C_CSIZE(tty)) {
-	case CS5:
-		new_lcr |= UART_LCR_WLEN5;
-		break;
-	case CS6:
-		new_lcr |= UART_LCR_WLEN6;
-		break;
-	case CS7:
-		new_lcr |= UART_LCR_WLEN7;
-		break;
-	default:
-	case CS8:
-		new_lcr |= UART_LCR_WLEN8;
-		break;
-	}
+	new_lcr |= UART_LCR_WLEN(tty_get_char_size(tty->termios.c_cflag));
 
 	baud = tty_get_baud_rate(tty);
 	if (!baud)
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 227f43d2bd56..1e12b5f30dcc 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1380,30 +1380,12 @@ static void change_port_settings(struct tty_struct *tty,
 		return;
 	}
 
-	lData = UART_LCR_WLEN8;
 	lStop = 0x00;	/* 1 stop bit */
 	lParity = 0x00;	/* No parity */
 
 	cflag = tty->termios.c_cflag;
 
-	/* Change the number of bits */
-	switch (cflag & CSIZE) {
-	case CS5:
-		lData = UART_LCR_WLEN5;
-		break;
-
-	case CS6:
-		lData = UART_LCR_WLEN6;
-		break;
-
-	case CS7:
-		lData = UART_LCR_WLEN7;
-		break;
-	default:
-	case CS8:
-		lData = UART_LCR_WLEN8;
-		break;
-	}
+	lData = UART_LCR_WLEN(tty_get_char_size(cflag));
 
 	/* Change the Parity bit */
 	if (cflag & PARENB) {
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 971907f083a3..36b1e064e51f 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -281,21 +281,7 @@ static void qt2_set_termios(struct tty_struct *tty,
 			new_lcr |= SERIAL_EVEN_PARITY;
 	}
 
-	switch (cflag & CSIZE) {
-	case CS5:
-		new_lcr |= UART_LCR_WLEN5;
-		break;
-	case CS6:
-		new_lcr |= UART_LCR_WLEN6;
-		break;
-	case CS7:
-		new_lcr |= UART_LCR_WLEN7;
-		break;
-	default:
-	case CS8:
-		new_lcr |= UART_LCR_WLEN8;
-		break;
-	}
+	new_lcr |= UART_LCR_WLEN(tty_get_char_size(cflag));
 
 	baud = tty_get_baud_rate(tty);
 	if (!baud)
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index 3baf7c0f5a98..181e302136a5 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -231,21 +231,7 @@ static void ssu100_set_termios(struct tty_struct *tty,
 			urb_value |= SERIAL_EVEN_PARITY;
 	}
 
-	switch (cflag & CSIZE) {
-	case CS5:
-		urb_value |= UART_LCR_WLEN5;
-		break;
-	case CS6:
-		urb_value |= UART_LCR_WLEN6;
-		break;
-	case CS7:
-		urb_value |= UART_LCR_WLEN7;
-		break;
-	default:
-	case CS8:
-		urb_value |= UART_LCR_WLEN8;
-		break;
-	}
+	urb_value |= UART_LCR_WLEN(tty_get_char_size(cflag));
 
 	baud = tty_get_baud_rate(tty);
 	if (!baud)
-- 
2.35.1


  parent reply	other threads:[~2022-02-24  9:56 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-24  9:55 [PATCH 0/5] UART_LCR_WLEN cleanups Jiri Slaby
2022-02-24  9:55 ` [PATCH 1/5] tty: serial: define UART_LCR_WLEN() macro Jiri Slaby
2022-02-24  9:55   ` [PATCH 2/5] tty: serial: make use of UART_LCR_WLEN() + tty_get_char_size() Jiri Slaby
2022-02-24 16:38     ` Thierry Reding
2022-02-24  9:55   ` Jiri Slaby [this message]
2022-02-24  9:55   ` [PATCH 4/5] sdio_uart: " Jiri Slaby
2022-02-28 16:16     ` Ulf Hansson
2022-02-24  9:55   ` [PATCH 5/5] mxser: " Jiri Slaby
2022-02-24 10:10   ` [PATCH 1/5] tty: serial: define UART_LCR_WLEN() macro Greg KH
2022-02-24 10:42     ` Jiri Slaby
2022-02-24 11:23       ` Greg KH
2022-02-25  9:40         ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220224095558.30929-3-jslaby@suse.cz \
    --to=jslaby@suse.cz \
    --cc=gregkh@linuxfoundation.org \
    --cc=johan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).