From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id C7AC5C4321E for ; Sat, 26 Feb 2022 10:20:32 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230523AbiBZKVE (ORCPT ); Sat, 26 Feb 2022 05:21:04 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49200 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229819AbiBZKVC (ORCPT ); Sat, 26 Feb 2022 05:21:02 -0500 Received: from mail.z3ntu.xyz (mail.z3ntu.xyz [128.199.32.197]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7EE431EDA03; Sat, 26 Feb 2022 02:20:28 -0800 (PST) Received: from localhost.localdomain (ip-213-127-118-180.ip.prioritytelecom.net [213.127.118.180]) by mail.z3ntu.xyz (Postfix) with ESMTPSA id 02483C8606; Sat, 26 Feb 2022 10:20:26 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=z3ntu.xyz; s=z3ntu; t=1645870827; bh=BBTPR8ndkMJKzpJc4293l6J8Otn5feMmw3gXpcNORDE=; h=From:To:Cc:Subject:Date:In-Reply-To:References; b=hK04Tbp110tYvso8tQ7qoodu6F9dvH7vbcPoOuTYIKvaGoWSB51/Fx/aPWNzrE4TO Rve3F4TLP0Jq2D+q6OEeFU3Zyco66Fpejyt7qumPwEivxTJ+BgaqkMzxlsQrl1Q8EG H9jms7yd4fuf3M7KqVCwDGniPg7nqfmdCj5paRH0= From: Luca Weiss To: linux-arm-msm@vger.kernel.org Cc: ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, Luca Weiss , Arnd Bergmann , Olof Johansson , soc@kernel.org, Rob Herring , Andy Gross , Bjorn Andersson , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 2/2] ARM: dts: qcom: Add support for ASUS ZenWatch 2 Date: Sat, 26 Feb 2022 11:19:39 +0100 Message-Id: <20220226101939.1011551-2-luca@z3ntu.xyz> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220226101939.1011551-1-luca@z3ntu.xyz> References: <20220226101939.1011551-1-luca@z3ntu.xyz> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add support for this smartwatch, based on Snapdragon 400 SoC. Currently supported functionality: * Internal storage * USB * Charger * Power button * Vibration motor * Bluetooth * Wifi Signed-off-by: Luca Weiss --- Please note that this patch soft-depends on "Bluetooth: hci_bcm: add BCM43430A0 & BCM43430A1" which I sent out yesterday. arch/arm/boot/dts/Makefile | 1 + .../boot/dts/qcom-apq8026-asus-sparrow.dts | 294 ++++++++++++++++++ arch/arm/boot/dts/qcom-msm8226.dtsi | 9 + 3 files changed, 304 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 235ad559acb2..4b2489580f7c 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -967,6 +967,7 @@ dtb-$(CONFIG_ARCH_OXNAS) += \ ox820-cloudengines-pogoplug-series-3.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8016-sbc.dtb \ + qcom-apq8026-asus-sparrow.dtb \ qcom-apq8026-lg-lenok.dtb \ qcom-apq8060-dragonboard.dtb \ qcom-apq8064-cm-qs600.dtb \ diff --git a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts new file mode 100644 index 000000000000..ace8cea27949 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts @@ -0,0 +1,294 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Luca Weiss + */ + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "qcom-pm8226.dtsi" + +/ { + model = "ASUS ZenWatch 2"; + compatible = "asus,sparrow", "qcom,apq8026"; + chassis-type = "watch"; + qcom,msm-id = <199 0x20000>; + qcom,board-id = <8 3005>; + + reserved-memory { + sbl_region: sbl@2f00000 { + reg = <0x02f00000 0x100000>; + no-map; + }; + external_image_region: external-image@3100000 { + reg = <0x3100000 0x200000>; + no-map; + }; + peripheral_region: peripheral@3300000 { + reg = <0x3300000 0x600000>; + no-map; + }; + adsp_region: adsp@3900000 { + reg = <0x3900000 0x1400000>; + no-map; + }; + modem_region: modem@4d00000 { + reg = <0x4d00000 0x1b00000>; + no-map; + }; + modem_efs_region: modem-efs@7f00000 { + reg = <0x7f00000 0x100000>; + no-map; + }; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_default_state>; + }; +}; + +&blsp1_uart1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart1_default_state>; + + bluetooth { + compatible = "brcm,bcm43430a1-bt"; + max-speed = <3000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_default_state>; + + host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>; + }; +}; + +&pm8226_vib { + status = "okay"; +}; + +&rpm_requests { + pm8226-regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l7: l7 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + }; + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + pm8226_l15: l15 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; +}; + +&sdhc_3 { + status = "okay"; + + max-frequency = <100000000>; + non-removable; + + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pm8226_l6>; + + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_hostwake_default_state>; + }; +}; + +&smbb { + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <350000>; + qcom,fast-charge-safe-voltage = <4430000>; + qcom,fast-charge-high-threshold-voltage = <4400000>; + qcom,auto-recharge-threshold-voltage = <4300000>; + qcom,minimum-input-voltage = <4400000>; +}; + +&tlmm { + blsp1_uart1_default_state: blsp1-uart1-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; + drive-strength = <8>; + bias-disable; + }; + + bluetooth_default_state: bluetooth-default-state { + pins = "gpio48", "gpio61"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + input-enable; + }; + + wlan_hostwake_default_state: wlan-hostwake-default-state { + pins = "gpio46"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + wlan_regulator_default_state: wlan-regulator-default-state { + pins = "gpio35"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&usb { + status = "okay"; + extcon = <&smbb>; + dr_mode = "peripheral"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi index dfeb47eb41a2..e24e53438b4d 100644 --- a/arch/arm/boot/dts/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi @@ -153,6 +153,15 @@ sdhc_3: sdhci@f9864900 { status = "disabled"; }; + blsp1_uart1: serial@f991d000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991d000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + blsp1_uart3: serial@f991f000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991f000 0x1000>; -- 2.35.1