linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Rob Herring <robh+dt@kernel.org>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Daniel Scally <djrscally@gmail.com>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	Hans de Goede <hdegoede@redhat.com>
Cc: linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org,
	Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Subject: [PATCH v3 6/6] usb: typec: mux: Add On Semi fsa4480 driver
Date: Thu,  3 Mar 2022 14:33:51 -0800	[thread overview]
Message-ID: <20220303223351.141238-6-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20220303223351.141238-1-bjorn.andersson@linaro.org>

The ON Semiconductor FSA4480 is a USB Type-C port multimedia switch with
support for analog audio headsets. It allows sharing a common USB Type-C
port to pass USB2.0 signal, analog audio, sideband use wires and analog
microphone signal.

Due to lacking upstream audio support for testing, the audio muxing is
left untouched, but implementation of muxing the SBU lines is provided
as a pair of Type-C mux and switch devices. This provides the necessary
support for enabling the DisplayPort altmode on devices with this
circuit.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v2:
- Expanded Kconfig help text.
- Fixed copyright year
- Fixed spelling mistakes in comments
- Introduce FSA4480_MAX_REGISTER
- Use dev_err_probe()
- Removed some useless blank lines.

Changes since v1:
- None

 drivers/usb/typec/mux/Kconfig   |  10 ++
 drivers/usb/typec/mux/Makefile  |   1 +
 drivers/usb/typec/mux/fsa4480.c | 216 ++++++++++++++++++++++++++++++++
 3 files changed, 227 insertions(+)
 create mode 100644 drivers/usb/typec/mux/fsa4480.c

diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig
index edead555835e..5eb2c17d72c1 100644
--- a/drivers/usb/typec/mux/Kconfig
+++ b/drivers/usb/typec/mux/Kconfig
@@ -2,6 +2,16 @@
 
 menu "USB Type-C Multiplexer/DeMultiplexer Switch support"
 
+config TYPEC_MUX_FSA4480
+	tristate "ON Semi FSA4480 Analog Audio Switch driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Driver for the ON Semiconductor FSA4480 Analog Audio Switch, which
+	  provides support for muxing analog audio and sideband signals on a
+	  common USB Type-C connector.
+	  If compiled as a module, the module will be named fsa4480.
+
 config TYPEC_MUX_PI3USB30532
 	tristate "Pericom PI3USB30532 Type-C cross switch driver"
 	depends on I2C
diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile
index 280a6f553115..e52a56c16bfb 100644
--- a/drivers/usb/typec/mux/Makefile
+++ b/drivers/usb/typec/mux/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 
+obj-$(CONFIG_TYPEC_MUX_FSA4480)		+= fsa4480.o
 obj-$(CONFIG_TYPEC_MUX_PI3USB30532)	+= pi3usb30532.o
 obj-$(CONFIG_TYPEC_MUX_INTEL_PMC)	+= intel_pmc_mux.o
diff --git a/drivers/usb/typec/mux/fsa4480.c b/drivers/usb/typec/mux/fsa4480.c
new file mode 100644
index 000000000000..ab8d014a6b79
--- /dev/null
+++ b/drivers/usb/typec/mux/fsa4480.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021-2022 Linaro Ltd.
+ * Copyright (C) 2018-2020 The Linux Foundation
+ */
+
+#include <linux/bits.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/typec_mux.h>
+
+#define FSA4480_SWITCH_ENABLE	0x04
+#define FSA4480_SWITCH_SELECT	0x05
+#define FSA4480_SWITCH_STATUS1	0x07
+#define FSA4480_SLOW_L		0x08
+#define FSA4480_SLOW_R		0x09
+#define FSA4480_SLOW_MIC	0x0a
+#define FSA4480_SLOW_SENSE	0x0b
+#define FSA4480_SLOW_GND	0x0c
+#define FSA4480_DELAY_L_R	0x0d
+#define FSA4480_DELAY_L_MIC	0x0e
+#define FSA4480_DELAY_L_SENSE	0x0f
+#define FSA4480_DELAY_L_AGND	0x10
+#define FSA4480_RESET		0x1e
+#define FSA4480_MAX_REGISTER	0x1f
+
+#define FSA4480_ENABLE_DEVICE	BIT(7)
+#define FSA4480_ENABLE_SBU	GENMASK(6, 5)
+#define FSA4480_ENABLE_USB	GENMASK(4, 3)
+
+#define FSA4480_SEL_SBU_REVERSE	GENMASK(6, 5)
+#define FSA4480_SEL_USB		GENMASK(4, 3)
+
+struct fsa4480 {
+	struct i2c_client *client;
+
+	/* used to serialize concurrent change requests */
+	struct mutex lock;
+
+	struct typec_switch_dev *sw;
+	struct typec_mux_dev *mux;
+
+	struct regmap *regmap;
+
+	u8 cur_enable;
+	u8 cur_select;
+};
+
+static const struct regmap_config fsa4480_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = FSA4480_MAX_REGISTER,
+};
+
+static int fsa4480_switch_set(struct typec_switch_dev *sw,
+			      enum typec_orientation orientation)
+{
+	struct fsa4480 *fsa = typec_switch_get_drvdata(sw);
+	u8 new_sel;
+
+	mutex_lock(&fsa->lock);
+	new_sel = FSA4480_SEL_USB;
+	if (orientation == TYPEC_ORIENTATION_REVERSE)
+		new_sel |= FSA4480_SEL_SBU_REVERSE;
+
+	if (new_sel == fsa->cur_select)
+		goto out_unlock;
+
+	if (fsa->cur_enable & FSA4480_ENABLE_SBU) {
+		/* Disable SBU output while re-configuring the switch */
+		regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE,
+			     fsa->cur_enable & ~FSA4480_ENABLE_SBU);
+
+		/* 35us to allow the SBU switch to turn off */
+		usleep_range(35, 1000);
+	}
+
+	regmap_write(fsa->regmap, FSA4480_SWITCH_SELECT, new_sel);
+	fsa->cur_select = new_sel;
+
+	if (fsa->cur_enable & FSA4480_ENABLE_SBU) {
+		regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, fsa->cur_enable);
+
+		/* 15us to allow the SBU switch to turn on again */
+		usleep_range(15, 1000);
+	}
+
+out_unlock:
+	mutex_unlock(&fsa->lock);
+
+	return 0;
+}
+
+static int fsa4480_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state)
+{
+	struct fsa4480 *fsa = typec_mux_get_drvdata(mux);
+	u8 new_enable;
+
+	mutex_lock(&fsa->lock);
+
+	new_enable = FSA4480_ENABLE_DEVICE | FSA4480_ENABLE_USB;
+	if (state->mode >= TYPEC_DP_STATE_A)
+		new_enable |= FSA4480_ENABLE_SBU;
+
+	if (new_enable == fsa->cur_enable)
+		goto out_unlock;
+
+	regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, new_enable);
+	fsa->cur_enable = new_enable;
+
+	if (new_enable & FSA4480_ENABLE_SBU) {
+		/* 15us to allow the SBU switch to turn off */
+		usleep_range(15, 1000);
+	}
+
+out_unlock:
+	mutex_unlock(&fsa->lock);
+
+	return 0;
+}
+
+static int fsa4480_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct typec_switch_desc sw_desc = { };
+	struct typec_mux_desc mux_desc = { };
+	struct fsa4480 *fsa;
+
+	fsa = devm_kzalloc(dev, sizeof(*fsa), GFP_KERNEL);
+	if (!fsa)
+		return -ENOMEM;
+
+	fsa->client = client;
+	mutex_init(&fsa->lock);
+
+	fsa->regmap = devm_regmap_init_i2c(client, &fsa4480_regmap_config);
+	if (IS_ERR(fsa->regmap))
+		return dev_err_probe(dev, PTR_ERR(fsa->regmap), "failed to initialize regmap\n");
+
+	fsa->cur_enable = FSA4480_ENABLE_DEVICE | FSA4480_ENABLE_USB;
+	fsa->cur_select = FSA4480_SEL_USB;
+
+	/* set default settings */
+	regmap_write(fsa->regmap, FSA4480_SLOW_L, 0x00);
+	regmap_write(fsa->regmap, FSA4480_SLOW_R, 0x00);
+	regmap_write(fsa->regmap, FSA4480_SLOW_MIC, 0x00);
+	regmap_write(fsa->regmap, FSA4480_SLOW_SENSE, 0x00);
+	regmap_write(fsa->regmap, FSA4480_SLOW_GND, 0x00);
+	regmap_write(fsa->regmap, FSA4480_DELAY_L_R, 0x00);
+	regmap_write(fsa->regmap, FSA4480_DELAY_L_MIC, 0x00);
+	regmap_write(fsa->regmap, FSA4480_DELAY_L_SENSE, 0x00);
+	regmap_write(fsa->regmap, FSA4480_DELAY_L_AGND, 0x09);
+	regmap_write(fsa->regmap, FSA4480_SWITCH_SELECT, fsa->cur_select);
+	regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, fsa->cur_enable);
+
+	sw_desc.drvdata = fsa;
+	sw_desc.fwnode = dev->fwnode;
+	sw_desc.set = fsa4480_switch_set;
+
+	fsa->sw = typec_switch_register(dev, &sw_desc);
+	if (IS_ERR(fsa->sw))
+		return dev_err_probe(dev, PTR_ERR(fsa->sw), "failed to register typec switch\n");
+
+	mux_desc.drvdata = fsa;
+	mux_desc.fwnode = dev->fwnode;
+	mux_desc.set = fsa4480_mux_set;
+
+	fsa->mux = typec_mux_register(dev, &mux_desc);
+	if (IS_ERR(fsa->mux)) {
+		typec_switch_unregister(fsa->sw);
+		return dev_err_probe(dev, PTR_ERR(fsa->mux), "failed to register typec mux\n");
+	}
+
+	i2c_set_clientdata(client, fsa);
+	return 0;
+}
+
+static int fsa4480_remove(struct i2c_client *client)
+{
+	struct fsa4480 *fsa = i2c_get_clientdata(client);
+
+	typec_mux_unregister(fsa->mux);
+	typec_switch_unregister(fsa->sw);
+
+	return 0;
+}
+
+static const struct i2c_device_id fsa4480_table[] = {
+	{ "fsa4480" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, fsa4480_table);
+
+static const struct of_device_id fsa4480_of_table[] = {
+	{ .compatible = "fcs,fsa4480" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, fsa4480_of_table);
+
+static struct i2c_driver fsa4480_driver = {
+	.driver = {
+		.name = "fsa4480",
+		.of_match_table = fsa4480_of_table,
+	},
+	.probe_new	= fsa4480_probe,
+	.remove		= fsa4480_remove,
+	.id_table	= fsa4480_table,
+};
+module_i2c_driver(fsa4480_driver);
+
+MODULE_DESCRIPTION("ON Semiconductor FSA4480 driver");
+MODULE_LICENSE("GPL v2");
-- 
2.33.1


  parent reply	other threads:[~2022-03-03 22:32 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-03 22:33 [PATCH v3 1/6] device property: Helper to match multiple connections Bjorn Andersson
2022-03-03 22:33 ` [PATCH v3 2/6] device property: Use multi-connection matchers for single case Bjorn Andersson
2022-03-04 12:54   ` Andy Shevchenko
2022-03-03 22:33 ` [PATCH v3 3/6] typec: mux: Introduce indirection Bjorn Andersson
2022-03-04 12:58   ` Andy Shevchenko
2022-03-03 22:33 ` [PATCH v3 4/6] typec: mux: Allow multiple mux_devs per mux Bjorn Andersson
2022-03-04 13:54   ` Andy Shevchenko
2022-03-07  3:09     ` Bjorn Andersson
2022-03-03 22:33 ` [PATCH v3 5/6] dt-bindings: usb: Add binding for fcs,fsa4480 Bjorn Andersson
2022-03-03 22:33 ` Bjorn Andersson [this message]
2022-03-04 12:54 ` [PATCH v3 1/6] device property: Helper to match multiple connections Andy Shevchenko
2022-03-04 13:41   ` Sakari Ailus
2022-03-04 13:52     ` Andy Shevchenko
2022-03-07  2:18       ` Bjorn Andersson
2022-03-07  9:31         ` Andy Shevchenko
2022-03-07  2:09   ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220303223351.141238-6-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=djrscally@gmail.com \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=hdegoede@redhat.com \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=rafael@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).