From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
Alim Akhtar <alim.akhtar@samsung.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jirislaby@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-serial@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/7] tty: serial: samsung: constify s3c24xx_serial_drv_data
Date: Mon, 7 Mar 2022 09:09:21 +0100 [thread overview]
Message-ID: <20220307080925.54131-2-krzysztof.kozlowski@canonical.com> (raw)
In-Reply-To: <20220307080810.53847-1-krzysztof.kozlowski@canonical.com>
The driver data (struct s3c24xx_serial_drv_data) is only used to
initialize the driver properly and is not modified. Make it const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
drivers/tty/serial/samsung_tty.c | 130 +++++++++++++++----------------
1 file changed, 65 insertions(+), 65 deletions(-)
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index a9a75b5b9705..c4b13f2d6e26 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -136,14 +136,14 @@ struct s3c24xx_uart_port {
unsigned int tx_mode;
unsigned int rx_mode;
- struct s3c24xx_uart_info *info;
+ const struct s3c24xx_uart_info *info;
struct clk *clk;
struct clk *baudclk;
struct uart_port port;
- struct s3c24xx_serial_drv_data *drv_data;
+ const struct s3c24xx_serial_drv_data *drv_data;
/* reference to platform data */
- struct s3c2410_uartcfg *cfg;
+ const struct s3c2410_uartcfg *cfg;
struct s3c24xx_uart_dma *dma;
@@ -221,7 +221,7 @@ static inline void s3c24xx_clear_bit(struct uart_port *port, int idx,
local_irq_restore(flags);
}
-static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
+static inline struct s3c24xx_uart_port *to_ourport(const struct uart_port *port)
{
return container_of(port, struct s3c24xx_uart_port, port);
}
@@ -573,13 +573,13 @@ static void s3c24xx_serial_stop_rx(struct uart_port *port)
}
}
-static inline struct s3c24xx_uart_info
+static inline const struct s3c24xx_uart_info
*s3c24xx_port_to_info(struct uart_port *port)
{
return to_ourport(port)->info;
}
-static inline struct s3c2410_uartcfg
+static inline const struct s3c2410_uartcfg
*s3c24xx_port_to_cfg(struct uart_port *port)
{
struct s3c24xx_uart_port *ourport;
@@ -594,7 +594,7 @@ static inline struct s3c2410_uartcfg
static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
unsigned long ufstat)
{
- struct s3c24xx_uart_info *info = ourport->info;
+ const struct s3c24xx_uart_info *info = ourport->info;
if (ufstat & info->rx_fifofull)
return ourport->port.fifosize;
@@ -986,7 +986,7 @@ static irqreturn_t apple_serial_handle_irq(int irq, void *id)
static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
{
- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+ const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT);
unsigned long ufcon = rd_regl(port, S3C2410_UFCON);
@@ -1405,7 +1405,7 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
static inline int s3c24xx_serial_getsource(struct uart_port *port)
{
- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+ const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
unsigned int ucon;
if (info->num_clks == 1)
@@ -1419,7 +1419,7 @@ static inline int s3c24xx_serial_getsource(struct uart_port *port)
static void s3c24xx_serial_setsource(struct uart_port *port,
unsigned int clk_sel)
{
- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+ const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
unsigned int ucon;
if (info->num_clks == 1)
@@ -1438,7 +1438,7 @@ static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
unsigned int req_baud, struct clk **best_clk,
unsigned int *clk_num)
{
- struct s3c24xx_uart_info *info = ourport->info;
+ const struct s3c24xx_uart_info *info = ourport->info;
struct clk *clk;
unsigned long rate;
unsigned int cnt, baud, quot, best_quot = 0;
@@ -1522,7 +1522,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
struct ktermios *termios,
struct ktermios *old)
{
- struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
+ const struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
struct s3c24xx_uart_port *ourport = to_ourport(port);
struct clk *clk = ERR_PTR(-EINVAL);
unsigned long flags;
@@ -1691,7 +1691,7 @@ static const char *s3c24xx_serial_type(struct uart_port *port)
static void s3c24xx_serial_config_port(struct uart_port *port, int flags)
{
- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+ const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
if (flags & UART_CONFIG_TYPE)
port->type = info->port_type;
@@ -1703,7 +1703,7 @@ static void s3c24xx_serial_config_port(struct uart_port *port, int flags)
static int
s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
{
- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+ const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
if (ser->type != PORT_UNKNOWN && ser->type != info->port_type)
return -EINVAL;
@@ -1873,9 +1873,9 @@ s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = {
*/
static void s3c24xx_serial_resetport(struct uart_port *port,
- struct s3c2410_uartcfg *cfg)
+ const struct s3c2410_uartcfg *cfg)
{
- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+ const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
unsigned long ucon = rd_regl(port, S3C2410_UCON);
ucon &= (info->clksel_mask | info->ucon_mask);
@@ -1979,7 +1979,7 @@ s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
static int s3c24xx_serial_enable_baudclk(struct s3c24xx_uart_port *ourport)
{
struct device *dev = ourport->port.dev;
- struct s3c24xx_uart_info *info = ourport->info;
+ const struct s3c24xx_uart_info *info = ourport->info;
char clk_name[MAX_CLK_NAME_LENGTH];
unsigned int clk_sel;
struct clk *clk;
@@ -2021,7 +2021,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
struct platform_device *platdev)
{
struct uart_port *port = &ourport->port;
- struct s3c2410_uartcfg *cfg = ourport->cfg;
+ const struct s3c2410_uartcfg *cfg = ourport->cfg;
struct resource *res;
int ret;
@@ -2156,7 +2156,7 @@ static const struct of_device_id s3c24xx_uart_dt_match[];
static int probe_index;
-static inline struct s3c24xx_serial_drv_data *
+static inline const struct s3c24xx_serial_drv_data *
s3c24xx_get_driver_data(struct platform_device *pdev)
{
#ifdef CONFIG_OF
@@ -2419,7 +2419,7 @@ static struct uart_port *cons_uart;
static int
s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
{
- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+ const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
unsigned long ufstat, utrstat;
if (ufcon & S3C2410_UFCON_FIFOMODE) {
@@ -2615,7 +2615,7 @@ static struct console s3c24xx_serial_console = {
#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
#ifdef CONFIG_CPU_S3C2410
-static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = {
+static const struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = {
.info = {
.name = "Samsung S3C2410 UART",
.type = TYPE_S3C24XX,
@@ -2637,13 +2637,13 @@ static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = {
.ufcon = S3C2410_UFCON_DEFAULT,
},
};
-#define S3C2410_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2410_serial_drv_data)
+#define S3C2410_SERIAL_DRV_DATA (&s3c2410_serial_drv_data)
#else
-#define S3C2410_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#define S3C2410_SERIAL_DRV_DATA NULL
#endif
#ifdef CONFIG_CPU_S3C2412
-static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = {
+static const struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = {
.info = {
.name = "Samsung S3C2412 UART",
.type = TYPE_S3C24XX,
@@ -2666,14 +2666,14 @@ static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = {
.ufcon = S3C2410_UFCON_DEFAULT,
},
};
-#define S3C2412_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2412_serial_drv_data)
+#define S3C2412_SERIAL_DRV_DATA (&s3c2412_serial_drv_data)
#else
-#define S3C2412_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#define S3C2412_SERIAL_DRV_DATA NULL
#endif
#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \
defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2442)
-static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = {
+static const struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = {
.info = {
.name = "Samsung S3C2440 UART",
.type = TYPE_S3C24XX,
@@ -2697,13 +2697,13 @@ static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = {
.ufcon = S3C2410_UFCON_DEFAULT,
},
};
-#define S3C2440_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2440_serial_drv_data)
+#define S3C2440_SERIAL_DRV_DATA (&s3c2440_serial_drv_data)
#else
-#define S3C2440_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#define S3C2440_SERIAL_DRV_DATA NULL
#endif
#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
-static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
+static const struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
.info = {
.name = "Samsung S3C6400 UART",
.type = TYPE_S3C6400,
@@ -2726,13 +2726,13 @@ static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
.ufcon = S3C2410_UFCON_DEFAULT,
},
};
-#define S3C6400_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c6400_serial_drv_data)
+#define S3C6400_SERIAL_DRV_DATA (&s3c6400_serial_drv_data)
#else
-#define S3C6400_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#define S3C6400_SERIAL_DRV_DATA NULL
#endif
#ifdef CONFIG_CPU_S5PV210
-static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
+static const struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
.info = {
.name = "Samsung S5PV210 UART",
.type = TYPE_S3C6400,
@@ -2755,9 +2755,9 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
},
.fifosize = { 256, 64, 16, 16 },
};
-#define S5PV210_SERIAL_DRV_DATA ((kernel_ulong_t)&s5pv210_serial_drv_data)
+#define S5PV210_SERIAL_DRV_DATA (&s5pv210_serial_drv_data)
#else
-#define S5PV210_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#define S5PV210_SERIAL_DRV_DATA NULL
#endif
#if defined(CONFIG_ARCH_EXYNOS)
@@ -2784,33 +2784,33 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
.has_fracval = 1, \
} \
-static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
+static const struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
EXYNOS_COMMON_SERIAL_DRV_DATA(),
.fifosize = { 256, 64, 16, 16 },
};
-static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = {
+static const struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = {
EXYNOS_COMMON_SERIAL_DRV_DATA(),
.fifosize = { 64, 256, 16, 256 },
};
-static struct s3c24xx_serial_drv_data exynos850_serial_drv_data = {
+static const struct s3c24xx_serial_drv_data exynos850_serial_drv_data = {
EXYNOS_COMMON_SERIAL_DRV_DATA(),
.fifosize = { 256, 64, 64, 64 },
};
-#define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data)
-#define EXYNOS5433_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos5433_serial_drv_data)
-#define EXYNOS850_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos850_serial_drv_data)
+#define EXYNOS4210_SERIAL_DRV_DATA (&exynos4210_serial_drv_data)
+#define EXYNOS5433_SERIAL_DRV_DATA (&exynos5433_serial_drv_data)
+#define EXYNOS850_SERIAL_DRV_DATA (&exynos850_serial_drv_data)
#else
-#define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)NULL)
-#define EXYNOS5433_SERIAL_DRV_DATA ((kernel_ulong_t)NULL)
-#define EXYNOS850_SERIAL_DRV_DATA ((kernel_ulong_t)NULL)
+#define EXYNOS4210_SERIAL_DRV_DATA NULL
+#define EXYNOS5433_SERIAL_DRV_DATA NULL
+#define EXYNOS850_SERIAL_DRV_DATA NULL
#endif
#ifdef CONFIG_ARCH_APPLE
-static struct s3c24xx_serial_drv_data s5l_serial_drv_data = {
+static const struct s3c24xx_serial_drv_data s5l_serial_drv_data = {
.info = {
.name = "Apple S5L UART",
.type = TYPE_APPLE_S5L,
@@ -2832,39 +2832,39 @@ static struct s3c24xx_serial_drv_data s5l_serial_drv_data = {
.ufcon = S3C2410_UFCON_DEFAULT,
},
};
-#define S5L_SERIAL_DRV_DATA ((kernel_ulong_t)&s5l_serial_drv_data)
+#define S5L_SERIAL_DRV_DATA (&s5l_serial_drv_data)
#else
-#define S5L_SERIAL_DRV_DATA ((kernel_ulong_t)NULL)
+#define S5L_SERIAL_DRV_DATA NULL
#endif
static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
{
.name = "s3c2410-uart",
- .driver_data = S3C2410_SERIAL_DRV_DATA,
+ .driver_data = (kernel_ulong_t)S3C2410_SERIAL_DRV_DATA,
}, {
.name = "s3c2412-uart",
- .driver_data = S3C2412_SERIAL_DRV_DATA,
+ .driver_data = (kernel_ulong_t)S3C2412_SERIAL_DRV_DATA,
}, {
.name = "s3c2440-uart",
- .driver_data = S3C2440_SERIAL_DRV_DATA,
+ .driver_data = (kernel_ulong_t)S3C2440_SERIAL_DRV_DATA,
}, {
.name = "s3c6400-uart",
- .driver_data = S3C6400_SERIAL_DRV_DATA,
+ .driver_data = (kernel_ulong_t)S3C6400_SERIAL_DRV_DATA,
}, {
.name = "s5pv210-uart",
- .driver_data = S5PV210_SERIAL_DRV_DATA,
+ .driver_data = (kernel_ulong_t)S5PV210_SERIAL_DRV_DATA,
}, {
.name = "exynos4210-uart",
- .driver_data = EXYNOS4210_SERIAL_DRV_DATA,
+ .driver_data = (kernel_ulong_t)EXYNOS4210_SERIAL_DRV_DATA,
}, {
.name = "exynos5433-uart",
- .driver_data = EXYNOS5433_SERIAL_DRV_DATA,
+ .driver_data = (kernel_ulong_t)EXYNOS5433_SERIAL_DRV_DATA,
}, {
.name = "s5l-uart",
- .driver_data = S5L_SERIAL_DRV_DATA,
+ .driver_data = (kernel_ulong_t)S5L_SERIAL_DRV_DATA,
}, {
.name = "exynos850-uart",
- .driver_data = EXYNOS850_SERIAL_DRV_DATA,
+ .driver_data = (kernel_ulong_t)EXYNOS850_SERIAL_DRV_DATA,
},
{ },
};
@@ -2873,23 +2873,23 @@ MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids);
#ifdef CONFIG_OF
static const struct of_device_id s3c24xx_uart_dt_match[] = {
{ .compatible = "samsung,s3c2410-uart",
- .data = (void *)S3C2410_SERIAL_DRV_DATA },
+ .data = S3C2410_SERIAL_DRV_DATA },
{ .compatible = "samsung,s3c2412-uart",
- .data = (void *)S3C2412_SERIAL_DRV_DATA },
+ .data = S3C2412_SERIAL_DRV_DATA },
{ .compatible = "samsung,s3c2440-uart",
- .data = (void *)S3C2440_SERIAL_DRV_DATA },
+ .data = S3C2440_SERIAL_DRV_DATA },
{ .compatible = "samsung,s3c6400-uart",
- .data = (void *)S3C6400_SERIAL_DRV_DATA },
+ .data = S3C6400_SERIAL_DRV_DATA },
{ .compatible = "samsung,s5pv210-uart",
- .data = (void *)S5PV210_SERIAL_DRV_DATA },
+ .data = S5PV210_SERIAL_DRV_DATA },
{ .compatible = "samsung,exynos4210-uart",
- .data = (void *)EXYNOS4210_SERIAL_DRV_DATA },
+ .data = EXYNOS4210_SERIAL_DRV_DATA },
{ .compatible = "samsung,exynos5433-uart",
- .data = (void *)EXYNOS5433_SERIAL_DRV_DATA },
+ .data = EXYNOS5433_SERIAL_DRV_DATA },
{ .compatible = "apple,s5l-uart",
- .data = (void *)S5L_SERIAL_DRV_DATA },
+ .data = S5L_SERIAL_DRV_DATA },
{ .compatible = "samsung,exynos850-uart",
- .data = (void *)EXYNOS850_SERIAL_DRV_DATA },
+ .data = EXYNOS850_SERIAL_DRV_DATA },
{},
};
MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
--
2.32.0
next prev parent reply other threads:[~2022-03-07 8:09 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20220307080826epcas5p13d71054f6b461cff91edbbb2cf42491a@epcas5p1.samsung.com>
2022-03-07 8:08 ` [PATCH v2 0/7] tty: serial: samsung: minor fixes/cleanups Krzysztof Kozlowski
2022-03-07 8:08 ` [PATCH v2 1/7] tty: serial: samsung: embed s3c24xx_uart_info in parent structure Krzysztof Kozlowski
2022-03-07 8:08 ` Krzysztof Kozlowski
2022-03-07 8:10 ` Krzysztof Kozlowski
2022-03-07 8:09 ` [PATCH v2 2/7] tty: serial: samsung: embed s3c2410_uartcfg " Krzysztof Kozlowski
2022-03-07 8:09 ` Krzysztof Kozlowski [this message]
2022-03-07 8:33 ` [PATCH v2 3/7] tty: serial: samsung: constify s3c24xx_serial_drv_data Jiri Slaby
2022-03-07 8:40 ` Krzysztof Kozlowski
2022-03-08 8:06 ` Krzysztof Kozlowski
2022-03-07 18:18 ` Alim Akhtar
2022-03-07 8:09 ` [PATCH v2 4/7] tty: serial: samsung: constify UART name Krzysztof Kozlowski
2022-03-07 8:09 ` [PATCH v2 5/7] tty: serial: samsung: constify s3c24xx_serial_drv_data members Krzysztof Kozlowski
2022-03-07 8:09 ` [PATCH v2 6/7] tty: serial: samsung: constify variables and pointers Krzysztof Kozlowski
2022-03-07 8:09 ` [PATCH v2 7/7] tty: serial: samsung: simplify getting OF match data Krzysztof Kozlowski
2022-03-07 18:16 ` Alim Akhtar
2022-03-07 20:24 ` Andy Shevchenko
2022-03-08 7:19 ` Krzysztof Kozlowski
2022-03-07 18:21 ` [PATCH v2 0/7] tty: serial: samsung: minor fixes/cleanups Alim Akhtar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220307080925.54131-2-krzysztof.kozlowski@canonical.com \
--to=krzysztof.kozlowski@canonical.com \
--cc=alim.akhtar@samsung.com \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).