linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Henning Schild <henning.schild@siemens.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mark Gross <markgross@kernel.org>,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>,
	<linux-kernel@vger.kernel.org>, <linux-leds@vger.kernel.org>,
	<platform-driver-x86@vger.kernel.org>,
	<linux-watchdog@vger.kernel.org>, Enrico Weigelt <lkml@metux.net>,
	Gerd Haeussler <gerd.haeussler.ext@siemens.com>,
	Henning Schild <henning.schild@siemens.com>
Subject: [PATCH 2/2] leds: simatic-ipc-leds-gpio: add GPIO version of Siemens driver
Date: Tue, 8 Mar 2022 20:35:22 +0100	[thread overview]
Message-ID: <20220308193522.26696-3-henning.schild@siemens.com> (raw)
In-Reply-To: <20220308193522.26696-1-henning.schild@siemens.com>

On Apollo Lake the pinctrl drivers will now come up without ACPI. Use
that instead of open coding it.
Create a new driver for that which can later be filled with more GPIO
based models, and which has different dependencies.

Signed-off-by: Henning Schild <henning.schild@siemens.com>
---
 drivers/leds/simple/Kconfig                 |  12 ++-
 drivers/leds/simple/Makefile                |   3 +-
 drivers/leds/simple/simatic-ipc-leds-gpio.c | 108 ++++++++++++++++++++
 drivers/leds/simple/simatic-ipc-leds.c      |  75 +-------------
 drivers/platform/x86/simatic-ipc.c          |   5 +-
 5 files changed, 129 insertions(+), 74 deletions(-)
 create mode 100644 drivers/leds/simple/simatic-ipc-leds-gpio.c

diff --git a/drivers/leds/simple/Kconfig b/drivers/leds/simple/Kconfig
index 9293e6b36c75..9d2487908743 100644
--- a/drivers/leds/simple/Kconfig
+++ b/drivers/leds/simple/Kconfig
@@ -3,10 +3,20 @@ config LEDS_SIEMENS_SIMATIC_IPC
 	tristate "LED driver for Siemens Simatic IPCs"
 	depends on LEDS_CLASS
 	depends on SIEMENS_SIMATIC_IPC
-	select P2SB if X86
 	help
 	  This option enables support for the LEDs of several Industrial PCs
 	  from Siemens.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called simatic-ipc-leds.
+
+config LEDS_SIEMENS_SIMATIC_IPC_GPIO
+	tristate "LED driver for Siemens Simatic IPCs, GPIO based"
+	depends on SIEMENS_SIMATIC_IPC
+	depends on LEDS_GPIO
+	help
+	  This option enables support for the LEDs of several Industrial PCs
+	  from Siemens.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called simatic-ipc-leds-gpio.
diff --git a/drivers/leds/simple/Makefile b/drivers/leds/simple/Makefile
index 8481f1e9e360..e1df74fb5915 100644
--- a/drivers/leds/simple/Makefile
+++ b/drivers/leds/simple/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_LEDS_SIEMENS_SIMATIC_IPC)	+= simatic-ipc-leds.o
+obj-$(CONFIG_LEDS_SIEMENS_SIMATIC_IPC)		+= simatic-ipc-leds.o
+obj-$(CONFIG_LEDS_SIEMENS_SIMATIC_IPC_GPIO)	+= simatic-ipc-leds-gpio.o
diff --git a/drivers/leds/simple/simatic-ipc-leds-gpio.c b/drivers/leds/simple/simatic-ipc-leds-gpio.c
new file mode 100644
index 000000000000..552b65a72e04
--- /dev/null
+++ b/drivers/leds/simple/simatic-ipc-leds-gpio.c
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Siemens SIMATIC IPC driver for GPIO based LEDs
+ *
+ * Copyright (c) Siemens AG, 2022
+ *
+ * Authors:
+ *  Henning Schild <henning.schild@siemens.com>
+ */
+
+#include <linux/gpio/machine.h>
+#include <linux/gpio/consumer.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+static struct gpiod_lookup_table simatic_ipc_led_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 51, NULL, 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 52, NULL, 1, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 53, NULL, 2, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 57, NULL, 3, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 58, NULL, 4, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 60, NULL, 5, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 56, NULL, 6, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("apollolake-pinctrl.0", 59, NULL, 7, GPIO_ACTIVE_HIGH),
+	}
+};
+
+static const struct gpio_led simatic_ipc_gpio_leds[] = {
+	{ .name = "green:" LED_FUNCTION_STATUS "-3" },
+	{ .name = "red:" LED_FUNCTION_STATUS "-1" },
+	{ .name = "green:" LED_FUNCTION_STATUS "-1" },
+	{ .name = "red:" LED_FUNCTION_STATUS "-2" },
+	{ .name = "green:" LED_FUNCTION_STATUS "-2" },
+	{ .name = "red:" LED_FUNCTION_STATUS "-3" },
+};
+
+static const struct gpio_led_platform_data simatic_ipc_gpio_leds_pdata = {
+	.num_leds	= ARRAY_SIZE(simatic_ipc_gpio_leds),
+	.leds		= simatic_ipc_gpio_leds,
+};
+
+static struct platform_device *simatic_leds_pdev;
+
+static int simatic_ipc_leds_gpio_remove(struct platform_device *pdev)
+{
+	gpiod_remove_lookup_table(&simatic_ipc_led_gpio_table);
+	platform_device_unregister(simatic_leds_pdev);
+
+	return 0;
+}
+
+static int simatic_ipc_leds_gpio_probe(struct platform_device *pdev)
+{
+	struct gpio_desc *gpiod;
+	int err;
+
+	gpiod_add_lookup_table(&simatic_ipc_led_gpio_table);
+	simatic_leds_pdev = platform_device_register_resndata(NULL,
+		"leds-gpio", PLATFORM_DEVID_NONE, NULL, 0,
+		&simatic_ipc_gpio_leds_pdata,
+		sizeof(simatic_ipc_gpio_leds_pdata));
+	if (IS_ERR(simatic_leds_pdev)) {
+		err = PTR_ERR(simatic_leds_pdev);
+		goto out;
+	}
+
+	/* PM_BIOS_BOOT_N */
+	gpiod = gpiod_get_index(&simatic_leds_pdev->dev, NULL, 6, 0);
+	if (IS_ERR(gpiod)) {
+		err = PTR_ERR(gpiod);
+		goto out;
+	}
+	gpiod_set_value(gpiod, 0);
+	gpiod_put(gpiod);
+
+	/* PM_WDT_OUT */
+	gpiod = gpiod_get_index(&simatic_leds_pdev->dev, NULL, 7, 0);
+	if (IS_ERR(gpiod)) {
+		err = PTR_ERR(gpiod);
+		goto out;
+	}
+	gpiod_set_value(gpiod, 0);
+	gpiod_put(gpiod);
+
+	return 0;
+out:
+	simatic_ipc_leds_gpio_remove(pdev);
+
+	return err;
+}
+
+static struct platform_driver simatic_ipc_led_gpio_driver = {
+	.probe = simatic_ipc_leds_gpio_probe,
+	.remove = simatic_ipc_leds_gpio_remove,
+	.driver = {
+		.name = KBUILD_MODNAME,
+	}
+};
+
+module_platform_driver(simatic_ipc_led_gpio_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" KBUILD_MODNAME);
+MODULE_SOFTDEP("pre: platform:leds-gpio");
+MODULE_AUTHOR("Henning Schild <henning.schild@siemens.com>");
diff --git a/drivers/leds/simple/simatic-ipc-leds.c b/drivers/leds/simple/simatic-ipc-leds.c
index 215ef5b74236..0f0dee053aa1 100644
--- a/drivers/leds/simple/simatic-ipc-leds.c
+++ b/drivers/leds/simple/simatic-ipc-leds.c
@@ -24,7 +24,7 @@
 #define SIMATIC_IPC_LED_PORT_BASE	0x404E
 
 struct simatic_ipc_led {
-	unsigned int value; /* mask for io and offset for mem */
+	unsigned int value; /* mask for io */
 	char *name;
 	struct led_classdev cdev;
 };
@@ -39,21 +39,6 @@ static struct simatic_ipc_led simatic_ipc_leds_io[] = {
 	{ }
 };
 
-/* the actual start will be discovered with p2sb, 0 is a placeholder */
-struct resource simatic_ipc_led_mem_res = DEFINE_RES_MEM_NAMED(0, 0, KBUILD_MODNAME);
-
-static void *simatic_ipc_led_memory;
-
-static struct simatic_ipc_led simatic_ipc_leds_mem[] = {
-	{0x500 + 0x1A0, "red:" LED_FUNCTION_STATUS "-1"},
-	{0x500 + 0x1A8, "green:" LED_FUNCTION_STATUS "-1"},
-	{0x500 + 0x1C8, "red:" LED_FUNCTION_STATUS "-2"},
-	{0x500 + 0x1D0, "green:" LED_FUNCTION_STATUS "-2"},
-	{0x500 + 0x1E0, "red:" LED_FUNCTION_STATUS "-3"},
-	{0x500 + 0x198, "green:" LED_FUNCTION_STATUS "-3"},
-	{ }
-};
-
 static struct resource simatic_ipc_led_io_res =
 	DEFINE_RES_IO_NAMED(SIMATIC_IPC_LED_PORT_BASE, SZ_2, KBUILD_MODNAME);
 
@@ -89,27 +74,6 @@ static enum led_brightness simatic_ipc_led_get_io(struct led_classdev *led_cd)
 	return inw(SIMATIC_IPC_LED_PORT_BASE) & led->value ? LED_OFF : led_cd->max_brightness;
 }
 
-static void simatic_ipc_led_set_mem(struct led_classdev *led_cd,
-				    enum led_brightness brightness)
-{
-	struct simatic_ipc_led *led = cdev_to_led(led_cd);
-
-	u32 *p;
-
-	p = simatic_ipc_led_memory + led->value;
-	*p = (*p & ~1) | (brightness == LED_OFF);
-}
-
-static enum led_brightness simatic_ipc_led_get_mem(struct led_classdev *led_cd)
-{
-	struct simatic_ipc_led *led = cdev_to_led(led_cd);
-
-	u32 *p;
-
-	p = simatic_ipc_led_memory + led->value;
-	return (*p & 1) ? LED_OFF : led_cd->max_brightness;
-}
-
 static int simatic_ipc_leds_probe(struct platform_device *pdev)
 {
 	const struct simatic_ipc_platform *plat = pdev->dev.platform_data;
@@ -117,8 +81,7 @@ static int simatic_ipc_leds_probe(struct platform_device *pdev)
 	struct simatic_ipc_led *ipcled;
 	struct led_classdev *cdev;
 	struct resource *res;
-	int err, type;
-	u32 *p;
+	int err;
 
 	switch (plat->devmode) {
 	case SIMATIC_IPC_DEVICE_227D:
@@ -133,35 +96,10 @@ static int simatic_ipc_leds_probe(struct platform_device *pdev)
 			}
 			ipcled = simatic_ipc_leds_io;
 		}
-		type = IORESOURCE_IO;
 		if (!devm_request_region(dev, res->start, resource_size(res), KBUILD_MODNAME)) {
 			dev_err(dev, "Unable to register IO resource at %pR\n", res);
 			return -EBUSY;
 		}
-		break;
-	case SIMATIC_IPC_DEVICE_127E:
-		res = &simatic_ipc_led_mem_res;
-		ipcled = simatic_ipc_leds_mem;
-		type = IORESOURCE_MEM;
-
-		err = p2sb_bar(NULL, 0, res);
-		if (err)
-			return err;
-
-		/* do the final address calculation */
-		res->start = res->start + (0xC5 << 16);
-		res->end = res->start + SZ_4K - 1;
-
-		simatic_ipc_led_memory = devm_ioremap_resource(dev, res);
-		if (IS_ERR(simatic_ipc_led_memory))
-			return PTR_ERR(simatic_ipc_led_memory);
-
-		/* initialize power/watchdog LED */
-		p = simatic_ipc_led_memory + 0x500 + 0x1D8; /* PM_WDT_OUT */
-		*p = (*p & ~1);
-		p = simatic_ipc_led_memory + 0x500 + 0x1C0; /* PM_BIOS_BOOT_N */
-		*p = (*p | 1);
-
 		break;
 	default:
 		return -ENODEV;
@@ -169,13 +107,8 @@ static int simatic_ipc_leds_probe(struct platform_device *pdev)
 
 	while (ipcled->value) {
 		cdev = &ipcled->cdev;
-		if (type == IORESOURCE_MEM) {
-			cdev->brightness_set = simatic_ipc_led_set_mem;
-			cdev->brightness_get = simatic_ipc_led_get_mem;
-		} else {
-			cdev->brightness_set = simatic_ipc_led_set_io;
-			cdev->brightness_get = simatic_ipc_led_get_io;
-		}
+		cdev->brightness_set = simatic_ipc_led_set_io;
+		cdev->brightness_get = simatic_ipc_led_get_io;
 		cdev->max_brightness = LED_ON;
 		cdev->name = ipcled->name;
 
diff --git a/drivers/platform/x86/simatic-ipc.c b/drivers/platform/x86/simatic-ipc.c
index 26c35e1660cb..ca3647b751d5 100644
--- a/drivers/platform/x86/simatic-ipc.c
+++ b/drivers/platform/x86/simatic-ipc.c
@@ -51,6 +51,7 @@ static int register_platform_devices(u32 station_id)
 {
 	u8 ledmode = SIMATIC_IPC_DEVICE_NONE;
 	u8 wdtmode = SIMATIC_IPC_DEVICE_NONE;
+	char *pdevname = KBUILD_MODNAME "_leds";
 	int i;
 
 	platform_data.devmode = SIMATIC_IPC_DEVICE_NONE;
@@ -64,10 +65,12 @@ static int register_platform_devices(u32 station_id)
 	}
 
 	if (ledmode != SIMATIC_IPC_DEVICE_NONE) {
+		if (ledmode == SIMATIC_IPC_DEVICE_127E)
+			pdevname = KBUILD_MODNAME "_leds_gpio";
 		platform_data.devmode = ledmode;
 		ipc_led_platform_device =
 			platform_device_register_data(NULL,
-				KBUILD_MODNAME "_leds", PLATFORM_DEVID_NONE,
+				pdevname, PLATFORM_DEVID_NONE,
 				&platform_data,
 				sizeof(struct simatic_ipc_platform));
 		if (IS_ERR(ipc_led_platform_device))
-- 
2.34.1


  parent reply	other threads:[~2022-03-08 19:35 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-31 15:13 [PATCH v4 0/8] platform/x86: introduce p2sb_bar() helper Andy Shevchenko
2022-01-31 15:13 ` [PATCH v4 1/8] platform/x86/intel: Add Primary to Sideband (P2SB) bridge support Andy Shevchenko
2022-02-14 11:26   ` Hans de Goede
2022-05-05 14:55   ` Lukas Wunner
2022-05-05 17:54     ` Andy Shevchenko
2022-05-08  7:13       ` Lukas Wunner
2022-05-08 10:05         ` Andy Shevchenko
2022-05-08 10:50           ` Lukas Wunner
2022-01-31 15:13 ` [PATCH v4 2/8] pinctrl: intel: Check against matching data instead of ACPI companion Andy Shevchenko
2022-01-31 15:13 ` [PATCH v4 3/8] mfd: lpc_ich: Factor out lpc_ich_enable_spi_write() Andy Shevchenko
2022-01-31 15:13 ` [PATCH v4 4/8] mfd: lpc_ich: Switch to generic p2sb_bar() Andy Shevchenko
2022-01-31 15:13 ` [PATCH v4 5/8] mfd: lpc_ich: Add support for pinctrl in non-ACPI system Andy Shevchenko
2022-02-15 16:54   ` Lee Jones
2022-02-15 17:11     ` Andy Shevchenko
2022-02-15 17:29       ` Lee Jones
2022-05-02 16:14         ` Andy Shevchenko
2022-05-04 12:52         ` Andy Shevchenko
2022-03-07 18:21   ` Henning Schild
2022-03-07 19:03     ` Andy Shevchenko
2022-01-31 15:13 ` [PATCH v4 6/8] i2c: i801: convert to use common P2SB accessor Andy Shevchenko
2022-02-03 14:14   ` Jean Delvare
2022-02-07 12:11   ` Wolfram Sang
2022-01-31 15:13 ` [PATCH v4 7/8] EDAC, pnd2: Use proper I/O accessors and address space annotation Andy Shevchenko
2022-01-31 15:13 ` [PATCH v4 8/8] EDAC, pnd2: convert to use common P2SB accessor Andy Shevchenko
2022-03-07 17:27 ` [PATCH v4 0/8] platform/x86: introduce p2sb_bar() helper Henning Schild
2022-03-08 19:35 ` [PATCH 0/2] simatic-ipc additions to p2sb apl lake gpio Henning Schild
2022-03-08 19:35   ` [PATCH 1/2] simatic-ipc: convert to use common P2SB accessor Henning Schild
2022-03-08 20:09     ` Henning Schild
2022-03-08 19:35   ` Henning Schild [this message]
2022-05-04 12:51   ` [PATCH 0/2] simatic-ipc additions to p2sb apl lake gpio Andy Shevchenko
2022-05-04 15:19     ` Henning Schild
2022-05-04 16:36       ` Andy Shevchenko
2022-05-05 21:57       ` Guenter Roeck
2022-05-10 15:30       ` Henning Schild
2022-05-10 16:05         ` Andy Shevchenko
2022-03-08 19:50 ` [PATCH v4 0/8] platform/x86: introduce p2sb_bar() helper Henning Schild
2022-05-04 12:42   ` Andy Shevchenko
2022-05-04 15:10     ` Henning Schild
2022-05-04 15:55       ` Andy Shevchenko
2022-05-07 10:33         ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220308193522.26696-3-henning.schild@siemens.com \
    --to=henning.schild@siemens.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=gerd.haeussler.ext@siemens.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=lkml@metux.net \
    --cc=markgross@kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).