From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
To: bjorn.andersson@linaro.org, mathieu.poirier@linaro.org,
robh+dt@kernel.org, krzysztof.kozlowski@canonical.com
Cc: shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
linux-remoteproc@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>
Subject: [PATCH V2 3/6] remoteproc: imx_rproc: support attaching to i.MX8QXP M4
Date: Wed, 9 Mar 2022 18:21:15 +0800 [thread overview]
Message-ID: <20220309102118.8131-4-peng.fan@oss.nxp.com> (raw)
In-Reply-To: <20220309102118.8131-1-peng.fan@oss.nxp.com>
From: Peng Fan <peng.fan@nxp.com>
When M4 is kicked by SCFW, M4 runs in its own hardware partition, Linux
could only do IPC with M4, it could not start, stop, update image.
When M4 crash reboot, it could notify Linux, so Linux could prepare to
reattach to M4 after M4 recovery.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
drivers/remoteproc/imx_rproc.c | 99 ++++++++++++++++++++++++++++++++++
1 file changed, 99 insertions(+)
diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index f2bfc9077c19..6ed53c660c18 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -6,6 +6,7 @@
#include <linux/arm-smccc.h>
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/firmware/imx/sci.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mailbox_client.h>
@@ -59,6 +60,8 @@
#define IMX_SIP_RPROC_STARTED 0x01
#define IMX_SIP_RPROC_STOP 0x02
+#define IMX_SC_IRQ_GROUP_REBOOTED 5
+
/**
* struct imx_rproc_mem - slim internal memory structure
* @cpu_addr: MPU virtual address of the memory region
@@ -89,6 +92,23 @@ struct imx_rproc {
struct work_struct rproc_work;
struct workqueue_struct *workqueue;
void __iomem *rsc_table;
+ struct imx_sc_ipc *ipc_handle;
+ struct notifier_block proc_nb;
+ u32 rproc_pt; /* partition id */
+ u32 rsrc; /* resource id */
+};
+
+static const struct imx_rproc_att imx_rproc_att_imx8qxp[] = {
+ /* dev addr , sys addr , size , flags */
+ { 0x08000000, 0x08000000, 0x10000000, 0},
+ /* TCML/U */
+ { 0x1FFE0000, 0x34FE0000, 0x00040000, ATT_OWN | ATT_IOMEM },
+ /* OCRAM(Low 96KB) */
+ { 0x21000000, 0x00100000, 0x00018000, 0},
+ /* OCRAM */
+ { 0x21100000, 0x00100000, 0x00040000, 0},
+ /* DDR (Data) */
+ { 0x80000000, 0x80000000, 0x60000000, 0 },
};
static const struct imx_rproc_att imx_rproc_att_imx8mn[] = {
@@ -235,6 +255,12 @@ static const struct imx_rproc_dcfg imx_rproc_cfg_imx8ulp = {
.method = IMX_RPROC_NONE,
};
+static const struct imx_rproc_dcfg imx_rproc_cfg_imx8qxp = {
+ .att = imx_rproc_att_imx8qxp,
+ .att_size = ARRAY_SIZE(imx_rproc_att_imx8qxp),
+ .method = IMX_RPROC_SCU_API,
+};
+
static const struct imx_rproc_dcfg imx_rproc_cfg_imx7ulp = {
.att = imx_rproc_att_imx7ulp,
.att_size = ARRAY_SIZE(imx_rproc_att_imx7ulp),
@@ -490,6 +516,15 @@ static int imx_rproc_attach(struct rproc *rproc)
return 0;
}
+/* Only support detach when doing attach recovery */
+static int imx_rproc_detach(struct rproc *rproc)
+{
+ if (rproc->state != RPROC_CRASHED)
+ return -EOPNOTSUPP;
+
+ return 0;
+}
+
static struct resource_table *imx_rproc_get_loaded_rsc_table(struct rproc *rproc, size_t *table_sz)
{
struct imx_rproc *priv = rproc->priv;
@@ -505,6 +540,7 @@ static struct resource_table *imx_rproc_get_loaded_rsc_table(struct rproc *rproc
static const struct rproc_ops imx_rproc_ops = {
.prepare = imx_rproc_prepare,
.attach = imx_rproc_attach,
+ .detach = imx_rproc_detach,
.start = imx_rproc_start,
.stop = imx_rproc_stop,
.kick = imx_rproc_kick,
@@ -651,6 +687,22 @@ static void imx_rproc_free_mbox(struct rproc *rproc)
mbox_free_channel(priv->rx_ch);
}
+static int imx_rproc_partition_notify(struct notifier_block *nb,
+ unsigned long event, void *group)
+{
+ struct imx_rproc *priv = container_of(nb, struct imx_rproc, proc_nb);
+
+ /* Ignore other irqs */
+ if (!((event & BIT(priv->rproc_pt)) && (*(u8 *)group == IMX_SC_IRQ_GROUP_REBOOTED)))
+ return 0;
+
+ rproc_report_crash(priv->rproc, RPROC_WATCHDOG);
+
+ pr_info("Partition%d reset!\n", priv->rproc_pt);
+
+ return 0;
+}
+
static int imx_rproc_detect_mode(struct imx_rproc *priv)
{
struct regmap_config config = { .name = "imx-rproc" };
@@ -660,6 +712,7 @@ static int imx_rproc_detect_mode(struct imx_rproc *priv)
struct arm_smccc_res res;
int ret;
u32 val;
+ u8 pt;
switch (dcfg->method) {
case IMX_RPROC_NONE:
@@ -670,6 +723,51 @@ static int imx_rproc_detect_mode(struct imx_rproc *priv)
if (res.a0)
priv->rproc->state = RPROC_DETACHED;
return 0;
+ case IMX_RPROC_SCU_API:
+ ret = imx_scu_get_handle(&priv->ipc_handle);
+ if (ret)
+ return ret;
+ ret = of_property_read_u32(dev->of_node, "rsrc-id", &priv->rsrc);
+ if (ret) {
+ dev_err(dev, "no rsrc-id\n");
+ return ret;
+ }
+
+ /*
+ * If Mcore resource is not owned by Acore partition, It is kicked by ROM,
+ * and Linux could only do IPC with Mcore and nothing else.
+ */
+ if (imx_sc_rm_is_resource_owned(priv->ipc_handle, priv->rsrc))
+ return 0;
+
+ rproc_set_feature(priv->rproc, RPROC_FEAT_ATTACH_RECOVERY);
+ priv->rproc->state = RPROC_DETACHED;
+
+ /* Get partition id and enable irq in SCFW */
+ ret = imx_sc_rm_get_resource_owner(priv->ipc_handle, priv->rsrc, &pt);
+ if (ret) {
+ dev_err(dev, "not able to get resource owner\n");
+ return ret;
+ }
+
+ priv->rproc_pt = pt;
+ priv->proc_nb.notifier_call = imx_rproc_partition_notify;
+
+ ret = imx_scu_irq_register_notifier(&priv->proc_nb);
+ if (ret) {
+ dev_warn(dev, "register scu notifier failed.\n");
+ return ret;
+ }
+
+ ret = imx_scu_irq_group_enable(IMX_SC_IRQ_GROUP_REBOOTED,
+ BIT(priv->rproc_pt), true);
+ if (ret) {
+ imx_scu_irq_unregister_notifier(&priv->proc_nb);
+ dev_warn(dev, "Enable irq failed.\n");
+ return ret;
+ }
+
+ return 0;
default:
break;
}
@@ -823,6 +921,7 @@ static const struct of_device_id imx_rproc_of_match[] = {
{ .compatible = "fsl,imx8mm-cm4", .data = &imx_rproc_cfg_imx8mq },
{ .compatible = "fsl,imx8mn-cm7", .data = &imx_rproc_cfg_imx8mn },
{ .compatible = "fsl,imx8mp-cm7", .data = &imx_rproc_cfg_imx8mn },
+ { .compatible = "fsl,imx8qxp-cm4", .data = &imx_rproc_cfg_imx8qxp },
{ .compatible = "fsl,imx8ulp-cm33", .data = &imx_rproc_cfg_imx8ulp },
{},
};
--
2.30.0
next prev parent reply other threads:[~2022-03-09 9:41 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-09 10:21 [PATCH V2 0/6] remoteproc: imx_rproc: support i.MX8QM/QXP Peng Fan (OSS)
2022-03-09 10:21 ` [PATCH V2 1/6] dt-bindings: remoteproc: imx_rproc: support i.MX8QXP Peng Fan (OSS)
2022-03-09 17:18 ` Krzysztof Kozlowski
2022-03-11 1:59 ` Peng Fan
2022-03-09 10:21 ` [PATCH V2 2/6] dt-bindings: remoteproc: imx_rproc: support i.MX8QM Peng Fan (OSS)
2022-03-10 23:09 ` Rob Herring
2022-03-11 1:58 ` Peng Fan
2022-03-14 22:38 ` Bjorn Andersson
2022-03-09 10:21 ` Peng Fan (OSS) [this message]
2022-03-09 10:21 ` [PATCH V2 4/6] remoteproc: imx_rproc: support kicking Mcore from Linux for i.MX8QXP Peng Fan (OSS)
2022-03-09 10:21 ` [PATCH V2 5/6] remoteproc: imx_rproc: support i.MX8QM Peng Fan (OSS)
2022-03-09 10:21 ` [PATCH V2 6/6] remoteproc: imx_rproc: request mbox channel later Peng Fan (OSS)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220309102118.8131-4-peng.fan@oss.nxp.com \
--to=peng.fan@oss.nxp.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=peng.fan@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).