From: Christophe Branchereau <cbranchereau@gmail.com>
To: Paul Cercueil <paul@crapouillou.net>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Thierry Reding <thierry.reding@gmail.com>,
Sam Ravnborg <sam@ravnborg.org>, Rob Herring <robh+dt@kernel.org>
Cc: linux-kernel@vger.kernel.org, linux-mips@vger.kernel.org,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org
Subject: [PATCH v4 3/4] drm/panel : innolux-ej030na and abt-y030xx067a : add .enable and .disable
Date: Fri, 11 Mar 2022 18:02:39 +0100 [thread overview]
Message-ID: <20220311170240.173846-4-cbranchereau@gmail.com> (raw)
In-Reply-To: <20220311170240.173846-1-cbranchereau@gmail.com>
Following the introduction of bridge_atomic_enable in the ingenic
drm driver, the crtc is enabled between .prepare and .enable, if
it exists.
Add it so the backlight is only enabled after the crtc is, to avoid
graphical issues.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
---
drivers/gpu/drm/panel/panel-abt-y030xx067a.c | 23 ++++++++++++--
drivers/gpu/drm/panel/panel-innolux-ej030na.c | 31 ++++++++++++++++---
2 files changed, 48 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-abt-y030xx067a.c b/drivers/gpu/drm/panel/panel-abt-y030xx067a.c
index f043b484055b..b5736344e3ec 100644
--- a/drivers/gpu/drm/panel/panel-abt-y030xx067a.c
+++ b/drivers/gpu/drm/panel/panel-abt-y030xx067a.c
@@ -183,8 +183,6 @@ static int y030xx067a_prepare(struct drm_panel *panel)
goto err_disable_regulator;
}
- msleep(120);
-
return 0;
err_disable_regulator:
@@ -202,6 +200,25 @@ static int y030xx067a_unprepare(struct drm_panel *panel)
return 0;
}
+static int y030xx067a_enable(struct drm_panel *panel)
+{
+ if (panel->backlight) {
+ /* Wait for the picture to be ready before enabling backlight */
+ msleep(120);
+ }
+
+ return 0;
+}
+
+static int y030xx067a_disable(struct drm_panel *panel)
+{
+ struct y030xx067a *priv = to_y030xx067a(panel);
+
+ regmap_clear_bits(priv->map, 0x06, REG06_XPSAVE);
+
+ return 0;
+}
+
static int y030xx067a_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
@@ -239,6 +256,8 @@ static int y030xx067a_get_modes(struct drm_panel *panel,
static const struct drm_panel_funcs y030xx067a_funcs = {
.prepare = y030xx067a_prepare,
.unprepare = y030xx067a_unprepare,
+ .enable = y030xx067a_enable,
+ .disable = y030xx067a_disable,
.get_modes = y030xx067a_get_modes,
};
diff --git a/drivers/gpu/drm/panel/panel-innolux-ej030na.c b/drivers/gpu/drm/panel/panel-innolux-ej030na.c
index c558de3f99be..6de7370185cd 100644
--- a/drivers/gpu/drm/panel/panel-innolux-ej030na.c
+++ b/drivers/gpu/drm/panel/panel-innolux-ej030na.c
@@ -80,8 +80,6 @@ static const struct reg_sequence ej030na_init_sequence[] = {
{ 0x47, 0x08 },
{ 0x48, 0x0f },
{ 0x49, 0x0f },
-
- { 0x2b, 0x01 },
};
static int ej030na_prepare(struct drm_panel *panel)
@@ -109,8 +107,6 @@ static int ej030na_prepare(struct drm_panel *panel)
goto err_disable_regulator;
}
- msleep(120);
-
return 0;
err_disable_regulator:
@@ -128,6 +124,31 @@ static int ej030na_unprepare(struct drm_panel *panel)
return 0;
}
+static int ej030na_enable(struct drm_panel *panel)
+{
+ struct ej030na *priv = to_ej030na(panel);
+
+ /* standby off */
+ regmap_write(priv->map, 0x2b, 0x01);
+
+ if (panel->backlight) {
+ /* Wait for the picture to be ready before enabling backlight */
+ msleep(120);
+ }
+
+ return 0;
+}
+
+static int ej030na_disable(struct drm_panel *panel)
+{
+ struct ej030na *priv = to_ej030na(panel);
+
+ /* standby on */
+ regmap_write(priv->map, 0x2b, 0x00);
+
+ return 0;
+}
+
static int ej030na_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
@@ -165,6 +186,8 @@ static int ej030na_get_modes(struct drm_panel *panel,
static const struct drm_panel_funcs ej030na_funcs = {
.prepare = ej030na_prepare,
.unprepare = ej030na_unprepare,
+ .enable = ej030na_enable,
+ .disable = ej030na_disable,
.get_modes = ej030na_get_modes,
};
--
2.35.1
next prev parent reply other threads:[~2022-03-11 17:03 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-11 17:02 [PATCH v4 0/4] Ingenic DRM bridge_atomic_enable proposal Christophe Branchereau
2022-03-11 17:02 ` [PATCH v4 1/4] drm/ingenic : add ingenic_drm_bridge_atomic_enable Christophe Branchereau
2022-03-14 19:57 ` Paul Cercueil
2022-03-11 17:02 ` [PATCH v4 2/4] drm/panel: Add panel driver for NewVision NV3052C based LCDs Christophe Branchereau
2022-03-14 19:54 ` Paul Cercueil
2022-03-21 13:14 ` Christophe Branchereau
2022-03-15 20:23 ` Sam Ravnborg
2022-03-21 9:36 ` Christophe Branchereau
2022-03-21 11:40 ` Sam Ravnborg
2022-03-11 17:02 ` Christophe Branchereau [this message]
2022-03-11 17:02 ` [PATCH v4 4/4] dt-bindings: display/panel: Add Leadtek ltk035c5444t Christophe Branchereau
2022-03-12 3:47 ` Rob Herring
2022-03-17 20:10 ` Paul Cercueil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220311170240.173846-4-cbranchereau@gmail.com \
--to=cbranchereau@gmail.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=paul@crapouillou.net \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).