linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: "Daniel González Cabanelas" <dgcbueu@gmail.com>,
	"Sasha Levin" <sashal@kernel.org>,
	linux-media@vger.kernel.org
Subject: [PATCH AUTOSEL 5.15 35/50] media: cx88-mpeg: clear interrupt status register before streaming video
Date: Wed, 30 Mar 2022 07:49:49 -0400	[thread overview]
Message-ID: <20220330115005.1671090-35-sashal@kernel.org> (raw)
In-Reply-To: <20220330115005.1671090-1-sashal@kernel.org>

From: Daniel González Cabanelas <dgcbueu@gmail.com>

[ Upstream commit 56cb61f70e547e1b0cdfe6ff5a1f1ce6242e6d96 ]

Some cx88 video cards may have transport stream status interrupts set
to 1 from cold start, causing errors like this:

  cx88xx: cx88_print_irqbits: core:irq mpeg  [0x100000] ts_err?*
  cx8802: cx8802_mpeg_irq: mpeg:general errors: 0x00100000

According to CX2388x datasheet, the interrupt status register should be
cleared before enabling IRQs to stream video.

Fix it by clearing the Transport Stream Interrupt Status register.

Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/cx88/cx88-mpeg.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/pci/cx88/cx88-mpeg.c b/drivers/media/pci/cx88/cx88-mpeg.c
index 680e1e3fe89b..2c1d5137ac47 100644
--- a/drivers/media/pci/cx88/cx88-mpeg.c
+++ b/drivers/media/pci/cx88/cx88-mpeg.c
@@ -162,6 +162,9 @@ int cx8802_start_dma(struct cx8802_dev    *dev,
 	cx_write(MO_TS_GPCNTRL, GP_COUNT_CONTROL_RESET);
 	q->count = 0;
 
+	/* clear interrupt status register */
+	cx_write(MO_TS_INTSTAT,  0x1f1111);
+
 	/* enable irqs */
 	dprintk(1, "setting the interrupt mask\n");
 	cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_TSINT);
-- 
2.34.1


  parent reply	other threads:[~2022-03-30 12:10 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-30 11:49 [PATCH AUTOSEL 5.15 01/50] media: staging: media: zoran: move videodev alloc Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 02/50] media: staging: media: zoran: calculate the right buffer number for zoran_reap_stat_com Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 03/50] media: staging: media: zoran: fix various V4L2 compliance errors Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 04/50] media: atmel: atmel-isc-base: report frame sizes as full supported range Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 05/50] media: ir_toy: free before error exiting Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 06/50] ASoC: sh: rz-ssi: Make the data structures available before registering the handlers Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 07/50] ASoC: SOF: Intel: match sdw version on link_slaves_found Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 08/50] media: imx-jpeg: Prevent decoding NV12M jpegs into single-planar buffers Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 09/50] ASoC: SOF: Intel: hda: Remove link assignment limitation Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 10/50] media: iommu/mediatek-v1: Free the existed fwspec if the master dev already has Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 11/50] media: iommu/mediatek: Return ENODEV if the device is NULL Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 12/50] media: iommu/mediatek: Add device_link between the consumer and the larb devices Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 13/50] video: fbdev: nvidiafb: Use strscpy() to prevent buffer overflow Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 14/50] video: fbdev: w100fb: Reset global state Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 15/50] video: fbdev: cirrusfb: check pixclock to avoid divide by zero Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 16/50] video: fbdev: omapfb: acx565akm: replace snprintf with sysfs_emit Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 17/50] ARM: dts: qcom: fix gic_irq_domain_translate warnings for msm8960 Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 18/50] ARM: dts: bcm2837: Add the missing L1/L2 cache information Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 19/50] ASoC: madera: Add dependencies on MFD Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 20/50] media: atomisp_gmin_platform: Add DMI quirk to not turn AXP ELDO2 regulator off on some boards Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 21/50] media: atomisp: fix dummy_ptr check to avoid duplicate active_bo Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 22/50] ARM: ftrace: avoid redundant loads or clobbering IP Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 23/50] ARM: dts: imx7: Use audio_mclk_post_div instead audio_mclk_root_clk Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 24/50] arm64: defconfig: build imx-sdma as a module Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 25/50] video: fbdev: omapfb: panel-dsi-cm: Use sysfs_emit() instead of snprintf() Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 26/50] video: fbdev: omapfb: panel-tpo-td043mtea1: " Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 27/50] video: fbdev: udlfb: replace snprintf in show functions with sysfs_emit Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 28/50] ARM: dts: bcm2711: Add the missing L1/L2 cache information Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 29/50] printk: Add panic_in_progress helper Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 30/50] printk: Avoid livelock with heavy printk during panic Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 31/50] printk: Drop console_sem " Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 32/50] ASoC: soc-core: skip zero num_dai component in searching dai name Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 33/50] printk: use atomic updates for klogd work Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 34/50] media: imx-jpeg: fix a bug of accessing array out of bounds Sasha Levin
2022-03-30 11:49 ` Sasha Levin [this message]
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 36/50] uaccess: fix type mismatch warnings from access_ok() Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 37/50] lib/test_lockup: fix kernel pointer check for separate address spaces Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 38/50] ARM: tegra: tamonten: Fix I2C3 pad setting Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 39/50] ARM: mmp: Fix failure to remove sram device Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 40/50] ASoC: amd: vg: fix for pm resume callback sequence Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 41/50] video: fbdev: sm712fb: Fix crash in smtcfb_write() Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 42/50] media: i2c: ov5648: Fix lockdep error Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 43/50] media: Revert "media: em28xx: add missing em28xx_close_extension" Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 44/50] media: hdpvr: initialize dev->worker at hdpvr_register_videodev Sasha Levin
2022-03-30 11:49 ` [PATCH AUTOSEL 5.15 45/50] ASoC: Intel: sof_sdw: fix quirks for 2022 HP Spectre x360 13" Sasha Levin
2022-03-30 11:50 ` [PATCH AUTOSEL 5.15 46/50] tracing: Have TRACE_DEFINE_ENUM affect trace event types as well Sasha Levin
2022-03-30 11:50 ` [PATCH AUTOSEL 5.15 47/50] mmc: host: Return an error when ->enable_sdio_irq() ops is missing Sasha Levin
2022-03-30 11:50 ` [PATCH AUTOSEL 5.15 48/50] ASoC: ak4642: Use of_device_get_match_data() Sasha Levin
2022-03-30 11:50 ` [PATCH AUTOSEL 5.15 49/50] media: atomisp: fix bad usage at error handling logic Sasha Levin
2022-03-30 11:50 ` [PATCH AUTOSEL 5.15 50/50] ALSA: hda/realtek: Add alc256-samsung-headphone fixup Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220330115005.1671090-35-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=dgcbueu@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).