From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 64681C433F5 for ; Sat, 2 Apr 2022 18:41:04 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1355259AbiDBSmx (ORCPT ); Sat, 2 Apr 2022 14:42:53 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:40644 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1357227AbiDBSme (ORCPT ); Sat, 2 Apr 2022 14:42:34 -0400 Received: from mail-wm1-x32c.google.com (mail-wm1-x32c.google.com [IPv6:2a00:1450:4864:20::32c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 9ED4B50040 for ; Sat, 2 Apr 2022 11:40:28 -0700 (PDT) Received: by mail-wm1-x32c.google.com with SMTP id q20so3550986wmq.1 for ; Sat, 02 Apr 2022 11:40:28 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=Sp/oLqlbge5GU7mZsZW/vx3cnsSFA9iABPk+CXY4wNg=; b=uQermoBxdAv6ihdtqTEbNjddI5LOjv2sgP8uaq/x7bM+rs+7OvofhXs1aFzKnXMqXs VqZ9BIvz2+6qyO6KrBEjovUZvAY3RjAJXc+uk2MUj4xYKyfTyipQBym0Lyar3l6iTFye gMChWkuyapkbpPU8fzvoZ8OzqRq7u7pUS5FWnSvzAjItqng+dJXb48A1IctyOJhTfL0y wGc/+JvG2Sx4PcyZlO6YEyO/JEDehtr8sUeWLNLSHNCsIcDfupzDab8ij3duScj2m4YB KfFLHIfkAIA7kIhfMJkQOS5xv55ZPFI8q9gLrlD+HUgU2kW+cwQ1eyQTSpOUIbDoi2qt /+Vg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=Sp/oLqlbge5GU7mZsZW/vx3cnsSFA9iABPk+CXY4wNg=; b=M6k9XOdNHmfXGnbt+GxXxWRGDkcOwNfv/CYemdEFhQ/c2V/jzK8w3QOwexsAjTsmBY Fmb0e1UFGXecVT5oiDryzgBQkSgWfWJiyPRG4DEE8mxY3WuiYKoWel/S4ITiMgMdTV3t AIFV7XkckkcI6czCgMyl1mtCKacfFoFnt9W+Sldo6gkJv9Dyw40uw9WoqYshZt/crcCi 62PmzVCgYiymxzr2ZD15QdJOU6bOkm3D4NeKnNR9hGfNNP8s5wjuuvMECbjuWUWSt/Hk KuYkGpaNWUhWS59pQCeXxu1zOHp+NgWUvqoYt1eVMc1g3xLubbBoS67FxUG9k/J565DY eFuA== X-Gm-Message-State: AOAM532yt6keDe+PeTpnNX4+XJb9v2iEV4UQIlda9/J41bOawA25fWXs ZoJgiBS4IRraLzKIDIKjdk53rg== X-Google-Smtp-Source: ABdhPJzKWhMSetsdvl9+noYgz+2YR/oqaR3HdqGzxC62zE4oTWSrcJcdEMLv0GwYLxCeb80tJWa+MA== X-Received: by 2002:a05:600c:600a:b0:38c:f953:adc0 with SMTP id az10-20020a05600c600a00b0038cf953adc0mr13523252wmb.188.1648924827120; Sat, 02 Apr 2022 11:40:27 -0700 (PDT) Received: from localhost.localdomain (xdsl-188-155-201-27.adslplus.ch. [188.155.201.27]) by smtp.gmail.com with ESMTPSA id m20-20020a05600c4f5400b0038b5162260csm6760502wmq.23.2022.04.02.11.40.25 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 02 Apr 2022 11:40:26 -0700 (PDT) From: Krzysztof Kozlowski To: Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Greg Kroah-Hartman , Mark Brown , linux-arm-msm@vger.kernel.org, linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org, linux-spi@vger.kernel.org Cc: Kuldeep Singh , Krzysztof Kozlowski Subject: [PATCH v3 9/9] dt-bindings: qcom: qcom,gsbi: convert to dtschema Date: Sat, 2 Apr 2022 20:40:11 +0200 Message-Id: <20220402184011.132465-10-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20220402184011.132465-1-krzysztof.kozlowski@linaro.org> References: <20220402184011.132465-1-krzysztof.kozlowski@linaro.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Convert the Qualcomm General Serial Bus Interface (GSBI) to DT Schema. Signed-off-by: Krzysztof Kozlowski --- .../bindings/soc/qcom/qcom,gsbi.txt | 87 ------------ .../bindings/soc/qcom/qcom,gsbi.yaml | 133 ++++++++++++++++++ 2 files changed, 133 insertions(+), 87 deletions(-) delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt deleted file mode 100644 index fe1855f09dcc..000000000000 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt +++ /dev/null @@ -1,87 +0,0 @@ -QCOM GSBI (General Serial Bus Interface) Driver - -The GSBI controller is modeled as a node with zero or more child nodes, each -representing a serial sub-node device that is mux'd as part of the GSBI -configuration settings. The mode setting will govern the input/output mode of -the 4 GSBI IOs. - -Required properties: -- compatible: Should contain "qcom,gsbi-v1.0.0" -- cell-index: Should contain the GSBI index -- reg: Address range for GSBI registers -- clocks: required clock -- clock-names: must contain "iface" entry -- qcom,mode : indicates MUX value for configuration of the serial interface. - Please reference dt-bindings/soc/qcom,gsbi.h for valid mux values. - -Optional properties: -- qcom,crci : indicates CRCI MUX value for QUP CRCI ports. Please reference - dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values. -- syscon-tcsr: indicates phandle of TCSR syscon node. Required if child uses - dma. - -Required properties if child node exists: -- #address-cells: Must be 1 -- #size-cells: Must be 1 -- ranges: Must be present - -Properties for children: - -A GSBI controller node can contain 0 or more child nodes representing serial -devices. These serial devices can be a QCOM UART, I2C controller, spi -controller, or some combination of aforementioned devices. - -See the following for child node definitions: -Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt -Documentation/devicetree/bindings/spi/qcom,spi-qup.txt -Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt - -Example for APQ8064: - -#include - - gsbi4@16300000 { - compatible = "qcom,gsbi-v1.0.0"; - cell-index = <4>; - reg = <0x16300000 0x100>; - clocks = <&gcc GSBI4_H_CLK>; - clock-names = "iface"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - qcom,mode = ; - qcom,crci = ; - - syscon-tcsr = <&tcsr>; - - /* child nodes go under here */ - - i2c_qup4: i2c@16380000 { - compatible = "qcom,i2c-qup-v1.1.1"; - reg = <0x16380000 0x1000>; - interrupts = <0 153 0>; - - clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; - clock-names = "core", "iface"; - - clock-frequency = <200000>; - - #address-cells = <1>; - #size-cells = <0>; - - }; - - uart4: serial@16340000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x16340000 0x1000>, - <0x16300000 0x1000>; - interrupts = <0 152 0x0>; - clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; - clock-names = "core", "iface"; - }; - }; - - tcsr: syscon@1a400000 { - compatible = "qcom,apq8064-tcsr", "syscon"; - reg = <0x1a400000 0x100>; - }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml new file mode 100644 index 000000000000..b97e359f3f90 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,gsbi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm General Serial Bus Interface (GSBI) + +maintainers: + - Andy Gross + - Bjorn Andersson + - Krzysztof Kozlowski + +description: + The GSBI controller is modeled as a node with zero or more child nodes, each + representing a serial sub-node device that is mux'd as part of the GSBI + configuration settings. The mode setting will govern the input/output mode + of the 4 GSBI IOs. + + A GSBI controller node can contain 0 or more child nodes representing serial + devices. These serial devices can be a QCOM UART, I2C controller, spi + controller, or some combination of aforementioned devices. + +properties: + compatible: + enum: + - qcom,gsbi-v1.0.0 + + '#address-cells': + const: 1 + + cell-index: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The GSBI index. + + clocks: + maxItems: 1 + + clock-names: + const: iface + + qcom,crci: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + CRCI MUX value for QUP CRCI ports. Please reference + include/dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values. + + qcom,mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + MUX value for configuration of the serial interface. Please reference + include/dt-bindings/soc/qcom,gsbi.h for valid mux values. + + '#size-cells': + const: 1 + + syscon-tcsr: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle of TCSR syscon node.Required if child uses dma. + + ranges: true + + reg: + maxItems: 1 + +patternProperties: + "spi@[0-9a-f]+$": + type: object + $ref: /schemas/spi/qcom,spi-qup.yaml# + + "i2c@[0-9a-f]+$": + type: object + $ref: /schemas/i2c/qcom,i2c-qup.yaml# + + "serial@[0-9a-f]+$": + type: object + $ref: /schemas/serial/qcom,msm-uartdm.yaml# + +required: + - compatible + - cell-index + - clocks + - clock-names + - qcom,mode + - reg + +additionalProperties: false + +examples: + - | + #include + #include + #include + + gsbi@12440000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12440000 0x100>; + cell-index = <1>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + qcom,mode = ; + + serial@12450000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12450000 0x100>, + <0x12400000 0x03>; + interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + }; + + i2c@12460000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x12460000 0x1000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-1 = <&i2c1_pins_sleep>; + pinctrl-names = "default", "sleep"; + interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; /* UART chosen */ + }; + }; -- 2.32.0