linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Markuss Broks <markuss.broks@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: phone-devel@vger.kernel.org,
	~postmarketos/upstreaming@lists.sr.ht,
	Markuss Broks <markuss.broks@gmail.com>,
	Pavel Machek <pavel@ucw.cz>, Rob Herring <robh+dt@kernel.org>,
	Christophe JAILLET <christophe.jaillet@wanadoo.fr>,
	Linus Walleij <linus.walleij@linaro.org>,
	linux-leds@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH 2/2] leds: ktd2692: Make aux-gpios optional
Date: Thu,  7 Apr 2022 13:10:06 +0300	[thread overview]
Message-ID: <20220407101034.13122-3-markuss.broks@gmail.com> (raw)
In-Reply-To: <20220407101034.13122-1-markuss.broks@gmail.com>

Make the AUX pin optional, since it isn't a core part of functionality,
and the device is designed to be operational with only one CTRL pin.

Also pick up maintainership for the LED driver and the yaml bindings.

Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
---
 MAINTAINERS                       |  6 ++++++
 drivers/leds/flash/leds-ktd2692.c | 18 ++++++++++--------
 2 files changed, 16 insertions(+), 8 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 2db49ea7ae55..8ef5667a1d98 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10479,6 +10479,12 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml
 F:	drivers/video/backlight/ktd253-backlight.c
 
+KTD2692 FLASH LED DRIVER
+M:	Markuss Broks <markuss.broks@gmail.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/leds/backlight/kinetic,ktd2692.yaml
+F:	drivers/leds/flash/leds-ktd2692.yaml
+
 KTEST
 M:	Steven Rostedt <rostedt@goodmis.org>
 M:	John Hawley <warthog9@eaglescrag.net>
diff --git a/drivers/leds/flash/leds-ktd2692.c b/drivers/leds/flash/leds-ktd2692.c
index f341da1503a4..f30c4b11c84b 100644
--- a/drivers/leds/flash/leds-ktd2692.c
+++ b/drivers/leds/flash/leds-ktd2692.c
@@ -163,7 +163,8 @@ static int ktd2692_led_brightness_set(struct led_classdev *led_cdev,
 
 	if (brightness == LED_OFF) {
 		led->mode = KTD2692_MODE_DISABLE;
-		gpiod_direction_output(led->aux_gpio, KTD2692_LOW);
+		if (led->aux_gpio)
+			gpiod_direction_output(led->aux_gpio, KTD2692_LOW);
 	} else {
 		ktd2692_expresswire_write(led, brightness |
 					KTD2692_REG_MOVIE_CURRENT_BASE);
@@ -191,10 +192,12 @@ static int ktd2692_led_flash_strobe_set(struct led_classdev_flash *fled_cdev,
 				| KTD2692_REG_FLASH_TIMEOUT_BASE);
 
 		led->mode = KTD2692_MODE_FLASH;
-		gpiod_direction_output(led->aux_gpio, KTD2692_HIGH);
+		if (led->aux_gpio)
+			gpiod_direction_output(led->aux_gpio, KTD2692_HIGH);
 	} else {
 		led->mode = KTD2692_MODE_DISABLE;
-		gpiod_direction_output(led->aux_gpio, KTD2692_LOW);
+		if (led->aux_gpio)
+			gpiod_direction_output(led->aux_gpio, KTD2692_LOW);
 	}
 
 	ktd2692_expresswire_write(led, led->mode | KTD2692_REG_MODE_BASE);
@@ -248,7 +251,8 @@ static void ktd2692_setup(struct ktd2692_context *led)
 {
 	led->mode = KTD2692_MODE_DISABLE;
 	ktd2692_expresswire_reset(led);
-	gpiod_direction_output(led->aux_gpio, KTD2692_LOW);
+	if (led->aux_gpio)
+		gpiod_direction_output(led->aux_gpio, KTD2692_LOW);
 
 	ktd2692_expresswire_write(led, (KTD2692_MM_MIN_CURR_THRESHOLD_SCALE - 1)
 				 | KTD2692_REG_MM_MIN_CURR_THRESHOLD_BASE);
@@ -286,10 +290,8 @@ static int ktd2692_parse_dt(struct ktd2692_context *led, struct device *dev,
 
 	led->aux_gpio = devm_gpiod_get(dev, "aux", GPIOD_ASIS);
 	ret = PTR_ERR_OR_ZERO(led->aux_gpio);
-	if (ret) {
-		dev_err(dev, "cannot get aux-gpios %d\n", ret);
-		return ret;
-	}
+	if (ret)
+		dev_info(dev, "aux-gpios not available, flash mode current might be reduced\n");
 
 	led->regulator = devm_regulator_get(dev, "vin");
 	if (IS_ERR(led->regulator))
-- 
2.35.1


  parent reply	other threads:[~2022-04-07 10:18 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-07 10:10 [PATCH 0/2] Make AUX gpio pin optional for ktd2692 Markuss Broks
2022-04-07 10:10 ` [PATCH 1/2] dt-bindings: leds: convert ktd2692 bindings to yaml Markuss Broks
2022-04-07 17:02   ` Rob Herring
2022-04-07 10:10 ` Markuss Broks [this message]
2022-04-08 11:04   ` [PATCH 2/2] leds: ktd2692: Make aux-gpios optional Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220407101034.13122-3-markuss.broks@gmail.com \
    --to=markuss.broks@gmail.com \
    --cc=christophe.jaillet@wanadoo.fr \
    --cc=devicetree@vger.kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=pavel@ucw.cz \
    --cc=phone-devel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).