From: Luca Weiss <luca.weiss@fairphone.com>
To: linux-arm-msm@vger.kernel.org
Cc: ~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org,
Luca Weiss <luca.weiss@fairphone.com>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] arm64: dts: qcom: sm6350: Add I2C busses
Date: Fri, 8 Apr 2022 13:42:05 +0200 [thread overview]
Message-ID: <20220408114205.234635-2-luca.weiss@fairphone.com> (raw)
In-Reply-To: <20220408114205.234635-1-luca.weiss@fairphone.com>
Add nodes for the I2C busses on sm6350.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
arch/arm64/boot/dts/qcom/sm6350.dtsi | 134 +++++++++++++++++++++++++++
1 file changed, 134 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index ef43af39569c..81db25952cf1 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -517,6 +517,45 @@ opp-384000000 {
};
};
+ qupv3_id_0: geniqup@8c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x0 0x8c0000 0x0 0x2000>;
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ iommus = <&apps_smmu 0x43 0x0>;
+ ranges;
+ status = "disabled";
+
+ i2c0: i2c@880000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00880000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c0_default>;
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@888000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00888000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c2_default>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
qupv3_id_1: geniqup@9c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x9c0000 0x0 0x2000>;
@@ -529,6 +568,45 @@ qupv3_id_1: geniqup@9c0000 {
ranges;
status = "disabled";
+ i2c6: i2c@980000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00980000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c6_default>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@984000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00984000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c7_default>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@988000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00988000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c8_default>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
uart9: serial@98c000 {
compatible = "qcom,geni-debug-uart";
reg = <0 0x98c000 0 0x4000>;
@@ -539,6 +617,20 @@ uart9: serial@98c000 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+
+ i2c10: i2c@990000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00990000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c10_default>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
};
tcsr_mutex: hwlock@1f40000 {
@@ -980,6 +1072,48 @@ qup_uart9_default: qup-uart9-default {
drive-strength = <2>;
bias-disable;
};
+
+ qup_i2c0_default: qup-i2c0-default {
+ pins = "gpio0", "gpio1";
+ function = "qup00";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c2_default: qup-i2c2-default {
+ pins = "gpio45", "gpio46";
+ function = "qup02";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c6_default: qup-i2c6-default {
+ pins = "gpio13", "gpio14";
+ function = "qup10";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c7_default: qup-i2c7-default {
+ pins = "gpio27", "gpio28";
+ function = "qup11";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c8_default: qup-i2c8-default {
+ pins = "gpio19", "gpio20";
+ function = "qup12";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c10_default: qup-i2c10-default {
+ pins = "gpio4", "gpio5";
+ function = "qup14";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
};
apps_smmu: iommu@15000000 {
--
2.35.1
prev parent reply other threads:[~2022-04-08 11:43 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-08 11:42 [PATCH 1/2] arm64: dts: qcom: sm6350: Fix naming of uart9 Luca Weiss
2022-04-08 11:42 ` Luca Weiss [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220408114205.234635-2-luca.weiss@fairphone.com \
--to=luca.weiss@fairphone.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).