linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: "Maíra Canal" <maira.canal@usp.br>
Cc: lars@metafoo.de, michael.hennerich@analog.com,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Marcelo Schmitt" <marcelo.schmitt1@gmail.com>,
	"Nuno Sá" <nuno.sa@analog.com>
Subject: Re: [PATCH v2] iio: ad7266: convert probe to full device-managed
Date: Sun, 10 Apr 2022 17:07:21 +0100	[thread overview]
Message-ID: <20220410170721.58abd877@jic23-huawei> (raw)
In-Reply-To: <20220407115621.10781-1-maira.canal@usp.br>

On Thu,  7 Apr 2022 08:56:21 -0300
Maíra Canal <maira.canal@usp.br> wrote:

> Convert probe functions to device-managed variants, with exception of
> the regulator, which required a devm_add_action_or_reset() hook
> registration.
> 
> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
> Reviewed-by: Nuno Sá <nuno.sa@analog.com>
> Signed-off-by: Maíra Canal <maira.canal@usp.br>

Nice. I tweaked the subject to be iio: adc: ad7266: 
I don't always remember to ensure subjects are consistent so you will find
all sorts of minor variants on the titles in IIO, but ideally it takes the
form I've change this one to.

Applied to the togreg branch of iio.git which will be initially pushed out
as testing to let 0-day see if it can find any problems.  If that's fine
I'll push it out as togreg later in the week and that gets picked up
for linux-next.

Thanks,

Jonathan

> ---
>  drivers/iio/adc/ad7266.c | 44 +++++++++++++---------------------------
>  1 file changed, 14 insertions(+), 30 deletions(-)
> 
> diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c
> index c17d9b5fbaf6..f20d39f0bc01 100644
> --- a/drivers/iio/adc/ad7266.c
> +++ b/drivers/iio/adc/ad7266.c
> @@ -378,6 +378,11 @@ static const char * const ad7266_gpio_labels[] = {
>  	"ad0", "ad1", "ad2",
>  };
>  
> +static void ad7266_reg_disable(void *reg)
> +{
> +	regulator_disable(reg);
> +}
> +
>  static int ad7266_probe(struct spi_device *spi)
>  {
>  	struct ad7266_platform_data *pdata = spi->dev.platform_data;
> @@ -398,9 +403,13 @@ static int ad7266_probe(struct spi_device *spi)
>  		if (ret)
>  			return ret;
>  
> +		ret = devm_add_action_or_reset(&spi->dev, ad7266_reg_disable, st->reg);
> +		if (ret)
> +			return ret;
> +
>  		ret = regulator_get_voltage(st->reg);
>  		if (ret < 0)
> -			goto error_disable_reg;
> +			return ret;
>  
>  		st->vref_mv = ret / 1000;
>  	} else {
> @@ -423,7 +432,7 @@ static int ad7266_probe(struct spi_device *spi)
>  						      GPIOD_OUT_LOW);
>  				if (IS_ERR(st->gpios[i])) {
>  					ret = PTR_ERR(st->gpios[i]);
> -					goto error_disable_reg;
> +					return ret;
>  				}
>  			}
>  		}
> @@ -433,7 +442,6 @@ static int ad7266_probe(struct spi_device *spi)
>  		st->mode = AD7266_MODE_DIFF;
>  	}
>  
> -	spi_set_drvdata(spi, indio_dev);
>  	st->spi = spi;
>  
>  	indio_dev->name = spi_get_device_id(spi)->name;
> @@ -459,35 +467,12 @@ static int ad7266_probe(struct spi_device *spi)
>  	spi_message_add_tail(&st->single_xfer[1], &st->single_msg);
>  	spi_message_add_tail(&st->single_xfer[2], &st->single_msg);
>  
> -	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
> +	ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, &iio_pollfunc_store_time,
>  		&ad7266_trigger_handler, &iio_triggered_buffer_setup_ops);
>  	if (ret)
> -		goto error_disable_reg;
> -
> -	ret = iio_device_register(indio_dev);
> -	if (ret)
> -		goto error_buffer_cleanup;
> -
> -	return 0;
> -
> -error_buffer_cleanup:
> -	iio_triggered_buffer_cleanup(indio_dev);
> -error_disable_reg:
> -	if (!IS_ERR(st->reg))
> -		regulator_disable(st->reg);
> -
> -	return ret;
> -}
> -
> -static void ad7266_remove(struct spi_device *spi)
> -{
> -	struct iio_dev *indio_dev = spi_get_drvdata(spi);
> -	struct ad7266_state *st = iio_priv(indio_dev);
> +		return ret;
>  
> -	iio_device_unregister(indio_dev);
> -	iio_triggered_buffer_cleanup(indio_dev);
> -	if (!IS_ERR(st->reg))
> -		regulator_disable(st->reg);
> +	return devm_iio_device_register(&spi->dev, indio_dev);
>  }
>  
>  static const struct spi_device_id ad7266_id[] = {
> @@ -502,7 +487,6 @@ static struct spi_driver ad7266_driver = {
>  		.name	= "ad7266",
>  	},
>  	.probe		= ad7266_probe,
> -	.remove		= ad7266_remove,
>  	.id_table	= ad7266_id,
>  };
>  module_spi_driver(ad7266_driver);


      reply	other threads:[~2022-04-10 15:59 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-07 11:56 [PATCH v2] iio: ad7266: convert probe to full device-managed Maíra Canal
2022-04-10 16:07 ` Jonathan Cameron [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220410170721.58abd877@jic23-huawei \
    --to=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maira.canal@usp.br \
    --cc=marcelo.schmitt1@gmail.com \
    --cc=michael.hennerich@analog.com \
    --cc=nuno.sa@analog.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).