From: Vinod Koul <vkoul@kernel.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, Vinod Koul <vkoul@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Manivannan Sadhasivam <mani@kernel.org>
Subject: [PATCH v2] arm64: dts: qcom: db845c: Add support for MCP2517FD
Date: Tue, 19 Apr 2022 10:03:48 +0530 [thread overview]
Message-ID: <20220419043348.1483625-1-vkoul@kernel.org> (raw)
Add support for onboard MCP2517FD SPI CAN transceiver attached to
SPI0 of RB3.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
Changes in v2:
- add cs and pinctrl config
- remove misleading comment
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 33 ++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 28fe45c5d516..4f4d45be93e3 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -28,6 +28,13 @@ chosen {
stdout-path = "serial0:115200n8";
};
+ /* Fixed crystal oscillator dedicated to MCP2517FD */
+ clk40M: can_clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+
dc12v: dc12v-regulator {
compatible = "regulator-fixed";
regulator-name = "DC12V";
@@ -746,6 +753,24 @@ codec {
};
};
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi0_default>;
+ cs-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
+
+ can@0 {
+ compatible = "microchip,mcp2517fd";
+ reg = <0>;
+ clocks = <&clk40M>;
+ interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
+ spi-max-frequency = <10000000>;
+ vdd-supply = <&vdc_5v>;
+ xceiver-supply = <&vdc_5v>;
+ status = "okay";
+ };
+};
+
&spi2 {
/* On Low speed expansion */
label = "LS-SPI0";
@@ -1219,3 +1244,11 @@ ov7251_ep: endpoint {
};
};
};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+&qup_spi0_default {
+ config {
+ drive-strength = <6>;
+ bias-disable;
+ };
+};
--
2.34.1
next reply other threads:[~2022-04-19 4:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-19 4:33 Vinod Koul [this message]
2022-04-19 7:37 ` [PATCH v2] arm64: dts: qcom: db845c: Add support for MCP2517FD Krzysztof Kozlowski
2022-04-21 7:23 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220419043348.1483625-1-vkoul@kernel.org \
--to=vkoul@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mani@kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).