From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
To: linux-kernel@vger.kernel.org
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>,
Michael Trimarchi <michael@amarulasolutions.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Marco Felsch <m.felsch@pengutronix.de>,
Oliver Graute <oliver.graute@kococonnector.com>,
Stephan Gerhold <stephan@gerhold.net>,
linux-input@vger.kernel.org
Subject: [RESEND PATCH v4 2/6] Input: edt-ft5x06 - get/set M12 report rate by sysfs
Date: Thu, 21 Apr 2022 20:59:59 +0200 [thread overview]
Message-ID: <20220421190003.3228699-3-dario.binacchi@amarulasolutions.com> (raw)
In-Reply-To: <20220421190003.3228699-1-dario.binacchi@amarulasolutions.com>
Add support for reading/writing scan rate (SC) register for M12 by
sysfs. The register value is equal to the SC (Hz), unlike M06, where
instead it is equal to SC / 10.
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Tested-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
(no changes since v1)
drivers/input/touchscreen/edt-ft5x06.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index bb2e1cbffba7..77f061af5c61 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -47,6 +47,8 @@
#define M09_REGISTER_NUM_X 0x94
#define M09_REGISTER_NUM_Y 0x95
+#define M12_REGISTER_REPORT_RATE 0x88
+
#define EV_REGISTER_THRESHOLD 0x40
#define EV_REGISTER_GAIN 0x41
#define EV_REGISTER_OFFSET_Y 0x45
@@ -523,9 +525,9 @@ static EDT_ATTR(offset_y, S_IWUSR | S_IRUGO, NO_REGISTER, NO_REGISTER,
/* m06: range 20 to 80, m09: range 0 to 30, m12: range 1 to 255... */
static EDT_ATTR(threshold, S_IWUSR | S_IRUGO, WORK_REGISTER_THRESHOLD,
M09_REGISTER_THRESHOLD, EV_REGISTER_THRESHOLD, 0, 255);
-/* m06: range 3 to 14, m12: (0x64: 100Hz) */
+/* m06: range 3 to 14, m12: range 1 to 255 */
static EDT_ATTR(report_rate, S_IWUSR | S_IRUGO, WORK_REGISTER_REPORT_RATE,
- NO_REGISTER, NO_REGISTER, 0, 255);
+ M12_REGISTER_REPORT_RATE, NO_REGISTER, 0, 255);
static struct attribute *edt_ft5x06_attrs[] = {
&edt_ft5x06_attr_gain.dattr.attr,
@@ -1030,7 +1032,8 @@ static void edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
case EDT_M09:
case EDT_M12:
reg_addr->reg_threshold = M09_REGISTER_THRESHOLD;
- reg_addr->reg_report_rate = NO_REGISTER;
+ reg_addr->reg_report_rate = tsdata->version == EDT_M12 ?
+ M12_REGISTER_REPORT_RATE : NO_REGISTER;
reg_addr->reg_gain = M09_REGISTER_GAIN;
reg_addr->reg_offset = M09_REGISTER_OFFSET;
reg_addr->reg_offset_x = NO_REGISTER;
--
2.32.0
next prev parent reply other threads:[~2022-04-21 19:00 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-21 18:59 [RESEND PATCH v4 0/6] Input: edt-ft5x06 - Improve configuration Dario Binacchi
2022-04-21 18:59 ` [RESEND PATCH v4 1/6] dt-bindings: input: touchscreen: edt-ft5x06: add report-rate-hz Dario Binacchi
2022-04-21 18:59 ` Dario Binacchi [this message]
2022-04-21 19:00 ` [RESEND PATCH v4 3/6] Input: edt-ft5x06 - set report rate by dts property Dario Binacchi
2022-04-21 19:00 ` [RESEND PATCH v4 4/6] Input: edt-ft5x06 - show model name by sysfs Dario Binacchi
2022-04-21 19:00 ` [RESEND PATCH v4 5/6] Input: edt-ft5x06 - show firmware version " Dario Binacchi
2022-04-21 19:00 ` [RESEND PATCH v4 6/6] Input: edt-ft5x06 - show crc and header errors " Dario Binacchi
2022-05-05 15:56 [RESEND PATCH v4 0/6] Input: edt-ft5x06 - Improve configuration Dario Binacchi
2022-05-05 15:56 ` [RESEND PATCH v4 2/6] Input: edt-ft5x06 - get/set M12 report rate by sysfs Dario Binacchi
2022-06-07 9:55 [RESEND PATCH v4 0/6] Input: edt-ft5x06 - Improve configuration Dario Binacchi
2022-06-07 9:55 ` [RESEND PATCH v4 2/6] Input: edt-ft5x06 - get/set M12 report rate by sysfs Dario Binacchi
2022-06-21 12:39 [RESEND PATCH v4 0/6] Input: edt-ft5x06 - Improve configuration Dario Binacchi
2022-06-21 12:39 ` [RESEND PATCH v4 2/6] Input: edt-ft5x06 - get/set M12 report rate by sysfs Dario Binacchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220421190003.3228699-3-dario.binacchi@amarulasolutions.com \
--to=dario.binacchi@amarulasolutions.com \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m.felsch@pengutronix.de \
--cc=michael@amarulasolutions.com \
--cc=oliver.graute@kococonnector.com \
--cc=stephan@gerhold.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).